211022774-ide-exam
Post on 13-Jan-2016
63 Views
Preview:
DESCRIPTION
TRANSCRIPT
1. Which product line has extreme single-threaded performance and industry-leading reliability and availability. Mark for Review (1) Points
T-Series servers
x86 rack-mount servers
M-Series servers (*)
Blade servers
Correct
2. Oracle Enterprise Manager Ops Center provide physical and virtual systems management for Oracle's SPARC and x86 servers. Mark for Review (1) Points
True (*)
False
Correct
3. A banking customer is looking to deploy a new Java-based web application. In general, which server should you recommend for this type of workload? Mark for Review (1) Points
Netra servers (e.g., Sun Netra T5440)
T-Series servers (e.g., T3-1) (*)
M-Series servers (e.g., M4000)
V-Series servers (e.g., V240)
Incorrect. Refer to the Server Overview training for more information.
4. Oracle Enterprise Linux is supported on x86, x86-64, and SPARC64 architectures. Mark for Review (1) Points
True
False (*)
Correct
5. Which product line is designed for customers who want or need to minimize server management, and datacenter space, power, and cooling, without giving up performance? Mark for Review (1) Points
x86 rack-mount servers
M-Series servers
T-Series servers
Blade servers (*)
Incorrect. Refer to the Server Overview training for more information.6. How many server products make up the Sun SPARC Enterprise MX000 server line? Mark for Review (1) Points
Five (*)
Eight
Two
Four
Correct
7. How many rack units (RUs) does the M4000 server utilize? Mark for Review (1) Points
8 RU
6 RU (*)
10 RU
12 RU
Correct
8. How many cores does each SPARC64 VI CPU have? Mark for Review (1) Points
Six
Two (*)
Four
One
Incorrect. Refer to the Sun SPARC Enterprise MX000 Server Overview and Architecture training for more information.
9. What type of CPUs do the Sun SPARC Enterprise MX000 servers support? Mark for Review (1) Points
UltraSPARC T1
UltraSPARC III/IV
UltraSPARC I/II
SPARC64 VI/VII (*)
Correct
10. What are the maximum number of high-density disk drives that can reside in a high-end server's IOU? Mark for Review (1) Points
Eight
Two
Six
Four (*)
Correct11. What is the purpose of the system controller (SC) in the MX000 servers?Mark for Review (1) Points
It provides console to the domains.
It is an ASIC that provides an interface between the MACs, the CPUs, and the I/O controllers. (*)
It monitors power to the system.
It allows you to configure domains.
Incorrect. Refer to the Sun SPARC Enterprise MX000 Server Overview and Architecture training for more information.
12. What are the possible configurations for an extended system board (XSB)? Mark for Review (1) Points
uni-mode, dual-mode, and quad-mode
uni-mode and quad-mode (*)
dual-mode and quad-mode
uni-mode and dual-mode
Correct
13. What are the maximum number of memory boards (MEMBs) that a M5000 server supports? Mark for Review (1) Points
Eight (*)
Two
Four
Six
Correct
14. Which of the following is not a function of the service processor (XSCFU)? Mark for Review (1) Points
Manages Capacity on Demand
Acts as an OS installation server for the domains (*)
Configures and monitors the platform
Provides system console
Correct
15. How many Physical System Board sets (PSBs) can reside in a M8000 server? Mark for Review (1) Points
Sixteen
Eight
Four (*)
Twelve
Correct
16. How many domains can you configure in a fully loaded M8000 server?Mark for Review (1) Points
Twenty-four
Eight
Sixteen (*)
Four
Correct
17. What is a physical system board composed of? Mark for Review (1) Points
CPU and I/O
CPU and memory
Memory and I/O
CPU, Memory, and I/O (*)
Correct
18. What type of PCI cards do the M4000 and M5000 servers support? Mark for Review (1) Points
PCI-E
PCI-X
Both PCI-E and PCI-X (*)
None of the above
Correct
19. Which of the following is a true statement? Mark for Review (1) Points
CPUs and memory reside on the same board in the mid-range servers.
CPUs and memory reside on different boards in the high-end servers.
CPUs and memory reside on different boards in the mid-range servers. (*)
None of the above.
Correct
20. What type of interconnect is used in the MX000 server line? Mark for Review (1) Points
Infiniband
UPA
Jupiter (*)
Sun Fire
Correct
21. Which of the following is not a security function of the XSCF? Mark for Review (1) Points
User privilege management
Access management by filtering
Log management
Firewall (*)
Correct
22. How many rack units (RUs) does the Sun SPARC Enterprise M3000 server occupy? Mark for Review (1) Points
8 RU
6 RU
2 RU (*)
4 RU
Correct
23. Which of the following user interfaces is not available on the XSCF? Mark for Review (1) Points
XSCF shell via network
XSCF web via serial (*)
XSCF web via network
XSCF shell via serial
Correct
24. What command needs to be executed before removing a power supply? Mark for Review (1) Points
<tt>replacefru</tt> (*)
<tt>poweroff</tt>
<tt>showhardconf</tt>
<tt>removefru</tt>
Correct
25. Which direction does air flow in the Sun SPARC Enterprise M3000 Server? Mark for Review (1) Points
Bottom to top
Top to bottom
Back to front
Front to back (*)
Correct
26. What is the purpose of the Predictive Failure Analysis? Mark for Review (1) Points
To automatically diagnose underlying problems and respond accordingly (*)
To mirror your boot disk
To patch your system
To put your system into low power mode when not in use
Correct
27. How can you connect to the XSCF service processor?Mark for Review (1) Points
Through both the serial and the Ethernet port (*)
Through the Ethernet port
Through the keyboard and monitor
Through the serial port
Incorrect. Refer to the Sun SPARC(TM) Enterprise M3000 Server training for more information.
28. What is the average weight of a fully loaded Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
150 pounds
75 pounds
125 pounds
50 pounds (*)
Correct
29. How many cooling groups is the system divided into?Mark for Review (1) Points
Two (*)
Four
One
Three
Correct
30. Which of the following is not a method for downloading the firmware using the <tt>getflashimage<//> command? Mark for Review (1) Points
ftp
USB memory stick
ssh (*)
http
Correct
31. Which of the following components is not a FRU? Mark for Review (1) Points
CPU (*)
Fan
Power supply
DVD drive
Correct
32. Which of the following is not one of the statuses to the <tt>showhardconf</tt> command output? Mark for Review (1) Points
Deconfigured
Crunched (*)
Degraded
Faulted
Correct
33. Which of the following is a true statement? Mark for Review (1) Points
The fan tray modules are hot-replaceable
The fan tray modules are redundant
The fan tray modules are neither redundant nor hot-replaceable
The fan tray modules are redundant and hot-replaceable (*)
Correct
34. Where does the system power LED reside on the Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
The rack that it is installed in
The back of the server
The top of the server
The operator panel (*)
Correct
35. Which of the following is a true statement regarding the hard disk drives? Mark for Review (1) Points
They are SATA drives
Supported are 100 GB and 200 GB
They are SAS drives (*)
There are internal cables connecting them to a disk controller card
Correct
36. What symbol is placed beside a failed or degraded component in the <tt>showhardconf</tt> and <tt>showstatus</tt> command output? Mark for Review (1) Points
* (*)
+
-
^
Correct
37. Which of the following LEDs does not reside on the operator panel? Mark for Review (1) Points
System power LED
System fault LED
Locator LED (*)
XSCF ready LED
Correct
38. How many USB ports does the Sun Fire X4540 server have?Mark for Review (1) Points
One for the domain
One for the domain and one for the service processor
One for the service processor (*)
none
Incorrect. Refer to the Sun SPARC(TM) Enterprise M3000 Server training for more information.
39. Which of the following components is not visible from the rear of the server? Mark for Review (1) Points
PCI-E cards
Ethernet ports
Power supplies
Fans (*)
Correct
40. How many groups is memory divided into? Mark for Review (1) Points
Four - Groups 1, 2, 3, and 4
Two - Groups A and B (*)
Four - Groups A, B, C and D
Two - Groups 1 and 2
Incorrect. Refer to the Sun SPARC(TM) Enterprise M3000 Server training for more information.
41. What are the supported DIMM sizes? Mark for Review (1) Points
256MB, 512MB, 1GB
1GB, 2GB, 8GB
512MB, 1GB, 2GB
1GB, 2GB, 4GB (*)
Incorrect. Refer to the Sun SPARC(TM) Enterprise M3000 Server training for more information.
42. Which of the following servers does the behavior of the M3000 server most resemble? Mark for Review (1) Points
Sun SPARC Enterprise MX000 servers (*)
Sun Fire Mid-range servers
Sun Fire E25K
Sun SPARC Enterprise T2000 server
Correct
43. Which command do you use to update firmware on the service processor? Mark for Review (1) Points
<tt>obpupdate</tt>
<tt>load</tt>
<tt>flashupdate</tt> (*)
<tt>firmwareupdate</tt>
Correct
44. What is the maximum internal storage configuration for the Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
Two 146GB hard drives
Three 146GB hard drives
One 146GB hard drive
Four 146GB hard drives (*)
Correct
Sun SPARC Enterprise MX000 Server Support Readiness Training(Answer all questions in this section)
45. How would you set the hostname for XSCF 0? Mark for Review (1) Points
<tt>sethostname xscf#0 <hostname></tt> (*)
<tt>hostname xscf#0</tt>
<tt>sethostname <hostname></tt>
<tt>hostname</tt>
Correct
46. What does the DSCP network connect? Mark for Review (1) Points
Domain to service processor (*)
Service processor to service processor
Domain to public network
Domain to domain
Correct
47. What are the maximum number of routes that can be configured for each network interface on the XSCF? Mark for Review
(1) Points
One
Four
Eight (*)
Two
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
48. Which command would you use to enable <tt>telnet</tt> on the service processor? Mark for Review (1) Points
<tt>settelnet enable</tt>
<tt>settelnet -c enable</tt> (*)
<tt>enable telnet</tt>
<tt>settelnet on</tt>
Correct
49. What type of PCI cards do the M4000 and M5000 servers support? Mark for Review (1) Points
Both PCI-E and PCI-X (*)
PCI-E
PCI-X
None of the above
Correct
50. What are the possible configurations for an extended system board (XSB)? Mark for Review (1) Points
uni-, dual-, and quad-
dual- and quad-
uni- and quad- (*)
uni- and dual-
Correct
51. What is the purpose of the system controller in the MX000 servers?Mark for Review (1) Points
It monitors power to the system.
It allows you to configure domains.
It provides console to the domains.
It is an ASIC that provides an interface between the MACs, the CPUs, and the I/O controllers. (*)
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
52. Which is the correct classification for the motherboard in the M4000 and M5000 servers? Mark for Review (1) Points
Hot replacement
Active replacement
Cold replacement (*)
All of the above
Correct
53. What is the possible range of timeout values in minutes for the <tt>setautologout</tt> command? Mark for Review (1) Points
1 � 60
0-255
0 - 60 (*)
0-255
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
54. Which of the following can be set with the <tt>setdomparam</tt> command? Mark for Review (1) Points
None of the above
Both a) and b) (*)
<tt>security-mode</tt>
tt>use-nvramrc</tt>
Correct
55. Which command assigns platadm privileges to the user sam? Mark for Review (1) Points
<tt>setprivileges platadm sam</tt>
<tt>setprivileges sam platadm</tt> (*)
<tt>privileges sam platadm</tt>
<tt>assign privileges sam platadm</tt>
Correct
56. What is the initial login account on the service processor? Mark for Review (1) Points
root
default (*)
admin
platadm
Correct
57. What does the <tt>setlookup</tt> command do? Mark for Review (1) Points
Enables or disables the use of LDAP (*)
Displays the LDAP configuration for the service processor
Configures the service processor as an LDAP client
Configures the service processor as an LDAP server
Correct
58. Prior to performing an <tt>addboard</tt> command what must the board be assigned to? Mark for Review (1) Points
The domain's DCL (*)
None of the above
The domain's ACL
Another domain's DCL
Correct
59. Which command do you execute to view the XSCF network interfaces? Mark for Review (1) Points
<tt>showtelnet</tt>
<tt>shownetwork</tt> (*)
<tt>showroute</tt>
<tt>shownet</tt>
Correct
60. Which of the following capabilities does a user created with useradm privileges not have? Mark for Review (1) Points
Assign domain hardware (*)
Change a user's privileges
Change a user's password
Create user accounts
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
61. Which of the following commands is used to configure SNMP on the service processor? Mark for Review (1) Points
<tt>setsnmp</tt>
<tt>setsnmpvacm</tt>
<tt>setsnmpusm</tt>
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
62. What does the <tt>setsmtp</tt> do? Mark for Review (1) Points
Configures a NTP server for use on the XSCF
None of the above
Configures an email server for use on the domains
Configures an email server for use on the XSCF (*)
Correct
63. Which conditions prevent you from detaching a system board? Mark for Review (1) Points
A process is bound to a CPU on the board that you are removing.
All of the above. (*)
A processor being removed is the last in its processor set.
There are real-time processes running and you are trying to remove a board with permanent memory.
Correct
64. What does the <tt>reserve</tt> option mean on the <tt>deleteboard</tt> command? Mark for Review
(1) Points
Disconnects the board but keeps it assigned to the domain
Reserves detachment of the board until the next power cycle (*)
Completely disconnects the board from the domain
Pre-tests the DR detach before completing it
Correct
65. When a system board is unassigned from a domain, where is it placed? Mark for Review (1) Points
In the available system board pool (*)
In domain 0
In the highest numbered domain
In the next lowest numbered domain
Correct
66. Which of the following is not a function of the service processor (XSCFU)? Mark for Review (1) Points
Acts as an OS installation server for the domains (*)
Provides system console
Configures and monitors the platform
Manages Capacity on Demand
Correct
67. How would you send a break to domain 0? Mark for Review (1) Points
<tt>break -d 0</tt>
<tt>sendbrk -d 0</tt>
<tt>Stop-A</tt>
<tt>sendbreak -d 0</tt> (*)
Correct
68. What XSCF function uses email reporting for remote maintenance? Mark for Review (1) Points
Fault management (*)
Dynamic Reconfiguration
Capacity On Demand
Domain creation
Correct
69. Which command would you use to configure the XSCF external network? Mark for Review (1) Points
<tt>setdscp</tt>
<tt>smsconfig</tt>
<tt>setupnetwork</tt>
<tt>setnetwork</tt> (*)
Correct
70. What is a physical system board composed of? Mark for Review (1) Points
CPU and memory
CPU and I/O
Memory and I/O
CPU, memory, and I/O (*)
Correct
71. Which of the following is NOT one of the options for the <tt>setpasswordpolicy</tt> command? Mark for Review (1) Points
<tt>minlen</tt>
<tt>inactive</tt>
<tt>maxdays</tt>
<tt>maxlen</tt> (*)
Correct
72. Which of the following is a true statement? Mark for Review (1) Points
None of the above.
The XSCFU only allows a serial connection.
The XSCFU allows both a serial and an ethernet connection. (*)
The XSCFU only allows an ethernet connection.
Correct
73. Which command would you use to create a new user on the service processor? Mark for Review (1) Points
<tt>user create</tt>
<tt>adduser</tt> (*)
<tt>useradd</tt>
<tt>showuser</tt>
Correct
74. What does the <tt>setdcl</tt> command set? Mark for Review (1) Points
Domain control list
None of the above
Domain configuration list
Domain component list (*)
Correct
75. Which command allows you to convert a uni-XSB to a quad-XSB and vice-versa? Mark for Review (1) Points
<tt>setfru</tt>
<tt>setupfru</tt> (*)
<tt>setupxsb</tt>
<tt>setxsb</tt>
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
76. Which of the following is NOT displayed in the output to the <tt>showenvironment</tt> command? Mark for Review (1) Points
Temperature
Voltage status
Domain status (*)
Fan status
Correct
77. Which command allows you to set the omit-memory option for use in DR operations? Mark for Review (1) Points
<tt>addboard</tt>
<tt>setmemory</tt>
<tt>omit-mem</tt>
<tt>setdcl</tt> (*)
Correct
78. Which command would you run to delete XSB 01-0 from domain 3? Mark for Review (1) Points
<tt>deleteboard -d 3 -c unassign 01-0</tt>
<tt>deleteboard -c unassign -xsb 01-0</tt>
<tt>deleteboard -c unassign 01-0</tt> (*)
<tt>deleteboard -c unassign -d 3 01-0</tt>
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
79. What is the DSCP network used for? Mark for Review (1) Points
Dynamic reconfiguration
Fault management
NTP
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
80. Which of the following is NOT a domain mode setting?Mark for Review (1) Points
Secure Mode
Verbosity Level (*)
Diagnostic Level
Autoboot
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
81. To perform an <tt>addboard</tt> operation, what state must the board be
in? Mark for Review (1) Points
Assigned
Running
Available (*)
Unknown
Correct
82. What is the advantage of defining a floating board?Mark for Review (1) Points
The memory on the board is not used in the domain.
The floating board has permanent memory assigned to it.
A floating board does not get permanent memory assigned to it. (*)
None of the above.
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
83. What command do you execute to power on all of the completely set up domains ? Mark for Review (1) Points
<tt>poweronall</tt>
<tt>poweron all</tt>
<tt>poweron -a</tt> (*)
<tt>power -on -all</tt>
Correct
84. What does the <tt>cfgadm</tt> allow you to do in the MX000 servers? Mark for Review (1) Points
Dynamically assign XSBs to domains
Dynamically unassign XSBs from domains
Hot-plug individual PCI cards from a domain (*)
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
Sun External I O Expansion Unit Installation and Administration(Answer all questions in this section)
85. What is the rack height needed to rack mount a Sun External I/O Expansion Unit? Mark for Review (1) Points
2U
1U
3U
4U (*)
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
86. What is the copper link kit made up of? Mark for Review (1) Points
. Two identical link cards and one cable (*)
. Two cables
. Two different link cards and one cable
. One cable
Correct
87. The I/O Boats and power supplies connect to: Mark for Review (1) Points
. The Centerplane (*)
. The Backplane
. The power distribution unit
. Each other
Correct
88. Which component feature is in the PCI-X I/O Boat but NOT in the PCIe I/O Boat? Mark for Review (1) Points
. Six PCI-X I/O adapter slots (*)
. Link card slot
. Overtemperature indicator
. Six PCIe I/O adapter slots
Correct
89. What is the maximum allowed distance between the host and the Sun External I/O Expansion Unit? Mark for Review (1) Points
. 10 meters
. 15 meters
. 1 meter
. 5 meters (*)
Correct
90. What combination of Sun External I/O Expansion Unit chassis LEDs indicates that the chassis has powered on OK? Mark for Review (1) Points
Power LED on, Fault LED off, Locator LED off, and Overtemperature on
Power LED on, Fault LED off, Locator LED off, and Overtemperature off (*)
Power LED on, Fault LED on, Locator LED off, and Overtemperature on
Power LED on, Fault LED on, Locator LED off, and Overtemperature off
Correct
91. Where is PSU0 located in the Sun External I/O Expansion Unit? Mark for Review (1) Points
. Back side, left slot
Front side, left slot
. Front side, right slot (*)
. Back side, right slot
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
92. Which software package contains the PCIe drivers for th
e sun4u platform? Mark for Review (1) Points
. SUNWpci.u
. SUNWiris.u
. SUNWcakr.u (*)
. SUNWsams.u
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
93. How many link cables does a Fibre optic link kit contain? Mark for Review (1) Points
. Two (*)
. Three
. Four
. One
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
94. Where can you find error messages about the Sun External I/O Expansion Unit Mark for Review (1) Points
. /share/adm/log (*)
. /dev/adm/log
. /var/adm/messages
. /etc/adm/log
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
95. Where can driver updates for the third-party vendor I/O adapters be found? Mark for Review (1) Points
. Vendor's web site (*)
. http://sun.com
. No updates are needed
. http://sunsolve.sun.com
Correct
96. If the attention LED on an I/O adapter is on what does that indicate?Mark for Review (1) Points
. Card failure (*)
. Normal operation
. Card port failure
. Link cable failure
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
97. Which is NOT a Field Replaceable Unit (FRU)? Mark for Review (1) Points
. Centerplane (*)
. I/O Boat
. Power supply
. I/O adapter
Correct
98. What information CANNOT be displayed by the ioxadm utility? Mark for Review (1) Points
. ioxadm session logins (*)
. Fan sensor data
. LED status
. Temperature sensor data
Correct
99. What is used to hold the card within the carrier?Mark for Review (1) Points
. Glue
. Three mounting tabs (*)
. Three holding screws
. Two brackets
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
100. At revenue release of the Sun External I/O Expansion Unit what hosts will be supported? Mark for Review (1) Points
Netra T2000 Server
. Sun Fire X4100 and Sun Fire X4200 servers
. Sun SPARC Enterprise M4000, M5000, M8000, and M9000 (*)
. Sun Fire T1000 and Sun Fire T2000 servers
Correct
101. What is a Smart Adjust hot pluggable carrier used for? Mark for Review (1) Points
. The carrier for the Sun External I/O Expansion Unit chassis
. The carrier for the I/O adapters and link card (*)
. The carrier for the I/O Boat
. The carrier for the power supplies
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
102. What can you use for strain relief and routing of I/O cabling? Mark for Review (1) Points
. Tie wraps to the rack
. Rack brackets
. Cable management bracket (*)
. Dongles
Correct
ESD Prevention(Answer all questions in this section)
103. Low humidity environments reduce the voltage generated from friction and moving, Mark for Review
(1) Points
True
False (*)
Incorrect. Refer to the ESD Prevention training for more information.
104. The leading cause of semiconductor failure is due to?Mark for Review (1) Points
Electrostatic discharge (*)
The increased use of 45nm technology in manufacturing semiconductors
Damage during shipments
Incorrect power supply used with the system
Correct
105. Standing up can generate up to 1,400 volts. Mark for Review (1) Points
True (*)
False
Incorrect. Refer to the ESD Prevention training for more information.
106. Which of the following is NOT one of the rules for preventing ESD damage? Mark for Review (1) Points
Store and transport ESD-sensitive items in static-shielding containers
Keep items away from electronic components
Make sure your grounding straps are not in contact with your skin. (*)
Handle electronic components only when you are properly grounded
Correct
107. What is the difference between a soft failure and a hard failure? Mark for Review (1) Points
Soft failures weaken components and is difficult to detect. Hard failures are easy to identify and trace back to ESD. (*)
Soft failures occurs in the software. Hard failures occurs in the hardware.
Hard failures represent 80% of all failures
Soft failures are easily detected and rapidly fixed. Hard failures are difficult to identify and fix.
Correct
108. Which of the following descriptions best defines ESD?Mark for Review (1) Points
The failure of an item that would result in failure of the system.
Damage to system components due to the use of an incorrect power supply
The ability of a part to withstand a static charge without failure.
The sudden transfer, or discharge, of electricity from one object to another. (*)
Incorrect. Refer to the ESD Prevention training for more information.
109. Which items generate static electricity? Mark for Review (1) Points
Work surfaces
Clothing
People
All of the above
Incorrect. Refer to the ESD Prevention training for more information.
110. Why are ESD "soft failures" the most serious type of failures? Mark for Review (1) Points
The damage is immediate and easily detected
They represent 40% of all failures
They represent 60% of failures
The damage is not immediately noticed or detected (*)
Incorrect. Refer to the ESD Prevention training for more information.
111. During the EIS Compliance Sign Off step: Mark for Review (1) Points
Follow the additional steps through PS or Partners. In WINGS, this depends on the availablility of templates reflecting these services.
Perform the system tests as defined.
Obtain project signoff and handover of project documentation
Create customer documentation and hand over for signoff. (*)
Correct
112. The EIS Methodology is a set of standards, processes, tools, and documentation that helps an installation team perform installations of Sun equipment in a consistent manner and provides them with a set of installation best practices for perfoming what particular installations? Mark for Review (1) Points
Currently concentraing on Solaris for SPARC platform, Solaris for x86 platform servers, and Sun storage (*)
Currently concentrating on Solaris for Sun storage only
Currently concentratin on Solaris for Solaris for x86 platform servers only.
Currently concentrating on Solaris for SPARC platfor only
Correct
113. EIS technical installation checklists are available for: Mark for Review (1) Points
Servers, Workstations, Software items
Workstations, Servers, Storage
Servers, Storage, Software items (*)
Servers, Storage, Appliances
Incorrect. Refer to the Using EIS Methodology training for more information.
114. True or False? EIS is a living process and is constantly being updated to keep abreast of our products and latest knowledge. Mark for Review (1) Points
True (*)
False
Incorrect. Refer to the Using EIS Methodology training for more information.
115. True or False? The EIS Methodololgy can be applied to other post-installation activities such as a Solaris OS upgrade. Mark for Review (1) Points
True (*)
False
Correct
116. True or False? The EIS DVD contains optional up-to-date patches and utilities sometimes needed during the installatoin procedure. Mark for Review (1) Points
True
False (*)
Correct
117. The grounding standard states that: Mark for Review (1) Points
A clean data center environment must be maintained: systems should be unpacked outside of the data center, and then moved into the center.
All server installations are to be properly grounded according to the methods described in the appropriate Sun hardware documentation. (*)
A system should not experience a maximum positive or negative temperature gradient of more than 2 degrees Celsiuls or 4 degrees Farenheit per hour.
Processes are in place to ensure that equipment is not damaged due to improper handling or climage changes between transportation and the final destination.
Correct
118. How do you identify a system that has been installed using EIS? (Select all that apply) Mark for Review (1) Points
(Choose all correct answers)
The system boots without error.
the file /var/sun/EIS-CD.log is populated when running the setup-standard script and the patch installation scripts. (*)
The EIS-DVD ejects from the DVD reader.
The results from Griffon should be clean. (*)
Incorrect. Refer to the Using EIS Methodology training for more information.
119. Global EIS Web contains: Mark for Review (1) Points
Patches and SunSolve information
Information, links, downloads, detailed training, and success stories (*)
Sun System Handbook links and links to heep://docs.sun.com
All of the above
Incorrect. Refer to the Using EIS Methodology training for more information.
120. How often is the EIS-DVD released? Mark for Review (1) Points
Twice a month
Once a year
Once a quarter
Once a month (*)
Correct
121. Planning is a very important phase of a successful installation and helps determine, and confirm, the deliverables with the customer. What tool is used for this type of work? Mark for Review (1) Points
WINGS (*)
CapacityTOOL
EISplan
INSTALLplan
Incorrect. Refer to the Using EIS Methodology training for more information.
122. EIS-DVD: (Select all that apply) Mark for Review (1) Points
Includes patches for Sun software required in most installations
Includes scripts to carry out standard settings and to unpack and install the patches
Includes programs and tools, such as explorer and Griffon
Enables the systems to be installed consistently and without need for internet connectivity
All of the above (*)
Correct
123. True or False? The acclimatization standard helps installer successfully introduce new Sun servers and storage to a customer's data cen
ter. Mark for Review (1) Points
True (*)
False
Incorrect. Refer to the Using EIS Methodology training for more information.
124. True or False? EIS does not and cannot cover every single product available from Sun. Mark for Review (1) Points
True
False (*)
Incorrect. Refer to the Using EIS Methodology training for more information.
125. True or False? The EIS methodology guarantees identical installations on all systems world-wide. Mark for Review (1) Points
True
False (*)
Incorrect. Refer to the Using EIS Methodology training for more information.
126. Where are the major changes between EIS-DVD revisions found? (Select all that apply() Mark for Review (1) Points
(Choose all correct answers)
On the EIS web site (*)
In the history .txt file on the DVD (*)
In the changes.txt file on the DVD
None of the above
Incorrect. Refer to the Using EIS Methodology training for more information.
127. During the System Specification and Test Definitions step: Mark for Review (1) Points
Create customer documentation and hand over for signoff.
Ensure that explorer (with the instinfo option) has been run and the explorer data file has been uploaded to the correct configDB.
Make sure the project can range from a single server installation to a complex international configuration involving multiple sites, servers, storage, and services.
Define details such as host names, IP addresses, and boot disk layout for the new systems. Furthermore, the testes that will be performed during customer handover are defined. (*)
Correct
128. True or False? EIS is an optional service for installations carried out by Sun staff and their installation partners. Mark for Review (1) Points
True
False (*)
Incorrect. Refer to the Using EIS Methodology training for more information.
129. True or False? The Boot Disk Layout and Mirroring Standard is intended to help installation planners format their boot disks in a consistent and supportable manner. Mark for Review (1) Points
True (*)
False
Incorrect. Refer to the Using EIS Methodology training for more information.
130. True or False? Enterprise installation Standards (EIS) is a methodology that ensures consistent, high-quality, cost-effective Sun systems and storage installations for Sun customers. Mark for Review (1) Points
True (*)
False
Correct1. Which product line has extreme single-threaded performance and industry-leading reliability and availability. Mark for Review (1) Points
x86 rack-mount servers
M-Series servers (*)
T-Series servers
Blade servers
Correct
2. What certification means the product meets specific specifications for vibration resistance, fire suppression, and RF emissions?Mark for Review (1) Points
NEBS Level 3 (*)
Evaluation Assurance Level (EAL) 4+
Telco Common Criteria
Energy Star
Correct
3. A banking customer is looking to deploy a new Java-based web application. In general, which server should you recommend for this type of workload? Mark for Review (1) Points
Netra servers (e.g., Sun Netra T5440)
V-Series servers (e.g., V240)
T-Series servers (e.g., T3-1) (*)
M-Series servers (e.g., M4000)
Correct
4. Oracle Enterprise Linux is supported on x86, x86-64, and SPARC64 architectures. Mark for Review (1) Points
True
False (*)
Correct
5. Which product line is designed for customers who want or need to minimize server management, and datacenter space, power, and cooling, without giving up performance? Mark for Review (1) Points
x86 rack-mount servers
Blade servers (*)
T-Series servers
M-Series servers
Correct6. What type of PCI cards do the M4000 and M5000 servers support? Mark for Review (1) Points
PCI-E
PCI-X
Both PCI-E and PCI-X (*)
None of the above
Correct
7. How many Physical System Board sets (PSBs) can reside in a M9000-64 server? Mark for Review (1) Points
Eight
Four
Twenty-four
Sixteen (*)
Correct
8. Which of the following is not a function of the service processor (XSCFU)? Mark for Review (1) Points
Provides system console
Configures and monitors the platform
Acts as an OS installation server for the domains (*)
Manages Capacity on Demand
Correct
9. What is the purpose of the system controller (SC) in the MX000 servers? Mark for Review (1) Points
It is an ASIC that provides an interface between the MACs, the CPUs, and the I/O controllers. (*)
It provides console to the domains.
It allows you to configure domains.
It monitors power to the system.
Correct
10. How many cores does each SPARC64 VI CPU have? Mark for Review (1) Points
Six
Two (*)
One
Four
Correct11. What type of PCI cards do the M8000 and M9000 servers support? Mark for Review (1) Points
PCI-E (*)
PCI-X
Both PCI-E and PCI-X
None of the above
Incorrect. Refer to the Sun SPARC Enterprise MX000 Server Overview and Architecture training for more information.
12. How many rack units (RUs) does the M4000 server utilize? Mark for Review (1) Points
12 RU
6 RU (*)
8 RU
10 RU
Correct
13. What type of interconnect is used in the MX000 server line? Mark for Review (1) Points
Infiniband
Sun Fire
Jupiter (*)
UPA
Correct
14. What are the possible configurations for an extended system board (XSB)? Mark for Review (1) Points
dual-mode and quad-mode
uni-mode and dual-mode
uni-mode and quad-mode (*)
uni-mode, dual-mode, and quad-mode
Correct
15. Which of the following is a true statement? Mark for Review (1) Points
CPUs and memory reside on the same board in the mid-range servers.
None of the above.
CPUs and memory reside on different boards in the high-end servers.
CPUs and memory reside on different boards in the mid-range servers. (*)
Correct
16. What are the maximum number of memory boards (MEMBs) that a M5000 server supports? Mark for Review (1) Points
Two
Six
Eight (*)
Four
Correct
17. How many domains can you configure in a fully loaded M8000 server? Mark for Review (1) Points
Sixteen (*)
Twenty-four
Eight
Four
Correct
18. What is a physical system board composed of? Mark for Review (1) Points
Memory and I/O
CPU and I/O
CPU and memory
CPU, Memory, and I/O (*)
Correct
19. How many server products make up the Sun SPARC Enterprise MX000 server line? Mark for Review (1) Points
Five (*)
Two
Eight
Four
Correct
20. What type of CPUs do the Sun SPARC Enterprise MX000 servers support? Mark for Review
(1) Points
UltraSPARC T1
UltraSPARC I/II
UltraSPARC III/IV
SPARC64 VI/VII (*)
Correct
21. Which of the following is not a method for downloading the firmware using the <tt>getflashimage<//> command? Mark for Review (1) Points
ssh (*)
USB memory stick
http
ftp
Correct
22. How many on-board Gigabit Ethernet interfaces are there for the domain? Mark for Review (1) Points
Two
Four (*)
Six
Eight
Correct
23. Which of the following components is not a FRU?Mark for Review (1) Points
Power supply
DVD drive
Fan
CPU (*)
Correct
24. Which of the following is a true statement regarding the hard disk drives? Mark for Review (1) Points
They are SAS drives (*)
There are internal cables connecting them to a disk controller card
Supported are 100 GB and 200 GB
They are SATA drives
Correct
25. Which of the following servers does the behavior of the M3000 server most resemble? Mark for Review (1) Points
Sun SPARC Enterprise T2000 server
Sun Fire E25K
Sun Fire Mid-range servers
Sun SPARC Enterprise MX000 servers (*)
Correct
26. Which of the following components can be replaced while the system is powered up? Mark for Review (1) Points
DVD drive
HDD backplane
Memory DIMM
HDD (*)
Correct
27. Which of the following LEDs does not reside on the operator panel? Mark for Review (1) Points
XSCF ready LED
System power LED
Locator LED (*)
System fault LED
Correct
28. What command needs to be executed before removing a power supply? Mark for Review (1) Points
<tt>replacefru</tt> (*)
<tt>poweroff</tt>
<tt>showhardconf</tt>
<tt>removefru</tt>
Correct
29. What is the maximum internal storage configuration for the Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
Two 146GB hard drives
One 146GB hard drive
Four 146GB hard drives (*)
Three 146GB hard drives
Correct
30. Which command do you run to display information about each FRU? Mark for Review (1) Points
<tt>showhardconf</tt> (*)
<tt>fmdump</tt>
<tt>showstatus</tt>
<tt>showlogs</tt>
Correct
31. What are the supported DIMM sizes? Mark for Review (1) Points
1GB, 2GB, 8GB
512MB, 1GB, 2GB
1GB, 2GB, 4GB (*)
256MB, 512MB, 1GB
Correct
32. How many USB ports does the Sun Fire X4540 server have?Mark for Review (1) Points
One for the domain
One for the domain and one for the service processor
none
One for the service processor (*)
Correct
33. How many rack units (RUs) does the Sun SPARC Enterprise M3000 server occupy? Mark for Review (1) Points
8 RU
2 RU (*)
6 RU
4 RU
Correct
34. How many cooling groups is the system divided into?Mark for Review (1) Points
Two (*)
One
Four
Three
Correct
35. What is the purpose of the Predictive Failure Analysis?Mark for Review (1) Points
To patch your system
To put your system into low power mode when not in use
To automatically diagnose underlying problems and respond accordingly (*)
To mirror your boot disk
Correct
36. Which direction does air flow in the Sun SPARC Enterprise M3000 Server?Mark for Review (1) Points
Front to back (*)
Back to front
Bottom to top
Top to bottom
Correct
37. Where does the system power LED reside on the Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
The operator panel (*)
The back of the server
The rack that it is installed in
The top of the server
Correct
38. Which of the following is a supported Sun SPARC Enterprise M3000 server configuration? Mark for Review (1) Points
Two SPARC64 VII quad-core processors
Two SPARC64 VII dual-core processors
One SPARC64 VII dual-core processor (*)
Four SPARC64 VII quad-core processors
Correct
39. What symbol is placed beside a failed or degraded component in the <tt>showhardconf</tt> and <tt>showstatus</tt> command output?Mark for Review (1) Points
^
* (*)
-
+
Correct
40. Which of the following is not a true statement regarding the power supplies? Mark for Review (1) Points
They are located in the front of the machine (*)
They are N+1 redundant
They are hot-replaceable
They are self cooling
Correct
41. How can you connect to the XSCF service processor? Mark for Review (1) Points
Through the serial port
Through the keyboard and monitor
Through both the serial and the Ethernet port (*)
Through the Ethernet port
Correct
42. What is the default command prompt on the service processor? Mark for Review (1) Points
XSCF> (*)
sp>
>
sc>
Correct
43. What is the average weight of a fully loaded Sun SPARC Enterprise M3000 server? Mark for Review (1) Points
125 pounds
50 pounds (*)
75 pounds
150 pounds
Correct
44. What is the external I/O slot configuration on the Sun Fire X4540 server? Mark for Review (1) Points
Four low profile PCI-E slots (*)
Four low profile PCI-X slots
Three low profile PCI-E slots
Three low profile PCI-X slots
Incorrect. Refer to the Sun SPARC(TM) Enterprise M3000 Server training for more information.
Sun SPARC Enterprise MX000 Server Support Readiness Training(Answer all questions in this section)
45. What does the DSCP network connect? Mark for Review (1) Points
Domain to domain
Domain to public network
Service processor to service processor
Domain to service processor (*)
Correct
46. What are the maximum number of routes that can be configured for each network interface on the XSCF? Mark for Review (1) Points
Two
Four
One
Eight (*)
Correct
47. Which command would you use to configure the XSCF external network? Mark for Review (1) Points
<tt>setnetwork</tt> (*)
<tt>smsconfig</tt>
<tt>setdscp</tt>
<tt>setupnetwork</tt>
Correct
48. How would you send a break to domain 0? Mark for Review (1) Points
<tt>Stop-A</tt>
<tt>break -d 0</tt>
<tt>sendbrk -d 0</tt>
<tt>sendbreak -d 0</tt> (*)
Correct
49. What is the DSCP network used for? Mark for Review (1) Points
Dynamic reconfiguration
Fault management
NTP
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
50. To perform an <tt>addboard</tt> operation, what state must the board be in? Mark for Review (1) Points
Available (*)
Running
Unknown
Assigned
Correct
51. Which of the following is a true statement? Mark for Review (1) Points
The XSCFU allows both a serial and an ethernet connection. (*)
The XSCFU only allows a serial connection.
The XSCFU only allows an ethernet connection.
None of the above.
Correct
52. Which command removes an XSCF user account? Mark for Review (1) Points
<tt>deleteuser</tt> (*)
<tt>user remove</tt>
<tt>removeuser</tt>
<tt>userdel</tt>
Correct
53. Which command would you use to enable <tt>telnet</tt> on the service processor? Mark for Review (1) Points
<tt>settelnet enable</tt>
<tt>settelnet -c enable</tt> (*)
<tt>enable telnet</tt>
<tt>settelnet on</tt>
Correct
54. Which command assigns platadm privileges to the user sam? Mark for Review (1) Points
<tt>setprivileges platadm sam</tt>
<tt>setprivileges sam platadm</tt> (*)
<tt>assign privileges sam platadm</tt>
<tt>privileges sam platadm</tt>
Correct
55. Which of the following commands is used to configure SNMP on the service processor? Mark for Review (1) Points
<tt>setsnmp</tt>
<tt>setsnmpvacm</tt>
<tt>setsnmpusm</tt>
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.56. What XSCF function uses email reporting for remote maintenance?Mark for Review (1) Points
Fault management (*)
Capacity On Demand
Dynamic Reconfiguration
Domain creation
Correct
57. Which command allows you to convert a uni-XSB to a quad-XSB and vice-versa? Mark for Review (1) Points
<tt>setupxsb</tt>
<tt>setupfru</tt> (*)
<tt>setfru</tt>
<tt>setxsb</tt>
Correct
58. How would you set the hostname for XSCF 0? Mark for Review (1) Points
<tt>sethostname <hostname></tt>
<tt>hostname xscf#0</tt>
<tt>sethostname xscf#0 <hostname></tt> (*)
<tt>hostname</tt>
Correct
59. What is a physical system board composed of? Mark for Review (1) Points
CPU, memory, and I/O (*)
Memory and I/O
CPU and I/O
CPU and memory
Correct
60. What is the advantage of defining a floating board?Mark for Review (1) Points
A floating board does not get permanent memory assigned to it. (*)
The floating board has permanent memory assigned to it.
The memory on the board is not used in the domain.
None of the above.
Correct
61. Prior to performing an <tt>addboard</tt> command what must the board be assigned to? Mark for Review (1) Points
The domain's ACL
None of the above
The domain's DCL (*)
Another domain's DCL
Correct
62. What does the <tt>reserve</tt> option mean on the <tt>deleteboard</tt> command? Mark for Review (1) Points
Disconnects the board but keeps it assigned to the domain
Reserves detachment of the board until the next power cycle (*)
Pre-tests the DR detach before completing it
Completely disconnects the board from the domain
Correct
63. What does the <tt>setsmtp</tt> do? Mark for Review (1) Points
Configures an email server for use on the domains
Configures an email server for use on the XSCF (*)
Configures a NTP server for use on the XSCF
None of the above
Correct
64. What does the <tt>setlookup</tt> command do? Mark for Review (1) Points
Configures the service processor as an LDAP server
Enables or disables the use of LDAP (*)
Configures the service processor as an LDAP client
Displays the LDAP configuration for the service processor
Correct
65. Which of the following is not a function of the service processor (XSCFU)? Mark for Review (1) Points
Provides system console
Configures and monitors the platform
Manages Capacity on Demand
Acts as an OS installation server for the domains (*)
Correct
66. What does the <tt>disableuser</tt> command do? Mark for Review (1) Points
None of the above
Disables the account immediately
Disables the account for subsequent logins (*)
Deletes the user
Correct
67. What are the physical keyswitch settings on the operator panel? Mark for Review (1) Points
On and off
On, locked, and service
On, off, and service
Locked and service (*)
Correct
68. When a system board is unassigned from a domain, where is it placed? Mark for Review (1) Points
In the available system board pool (*)
In the highest numbered domain
In the next lowest numbered domain
In domain 0
Correct
69. What is the possible range of timeout values in minutes
for the <tt>setautologout</tt> command? Mark for Review (1) Points
0-255
0-255
1 � 60
0 - 60 (*)
Correct
70. What is the <tt>cfgdevice</tt> command used for?Mark for Review (1) Points
To connect or disconnect the DVD/DAT drive to the specified domain (*)
To attach or detach an I/O board to the specified domain
To POST a domain
To connect or disconnect a CPU board to the specified domain
Correct
71. What is the default escape key sequence from a domain's console?Mark for Review (1) Points
<tt>#.</tt> (*)
<tt>~.</tt>
<tt>[ESC]</tt>
<tt>~#</tt>
Correct
72. Which command would you use to create a new user on the service processor? Mark for Review (1) Points
<tt>showuser</tt>
<tt>user create</tt>
<tt>adduser</tt> (*)
<tt>useradd</tt>
Correct
73. Which of the following commands is NOT used to manage DNS on the service processor? Mark for Review (1) Points
<tt>setnameserver</tt>
<tt>shownameserver</tt>
<tt>setdns</tt> (*)
<tt>sethostanme</tt>
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
74. Which command do you execute to view the XSCF network interfaces? Mark for Review (1) Points
<tt>shownetwork</tt> (*)
<tt>showroute</tt>
<tt>shownet</tt>
<tt>showtelnet</tt>
Correct
75. What does the <tt>cfgadm</tt> allow you to do in the MX000 servers? Mark for Review (1) Points
Dynamically assign XSBs to domains
Dynamically unassign XSBs from domains
Hot-plug individual PCI cards from a domain (*)
All of the above
Correct
76. What are the maximum number of DNS servers that can be registered for the service processor? Mark for Review (1) Points
Two
One
Four
Three (*)
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
77. What type of PCI cards do the M4000 and M5000 servers support? Mark for Review (1) Points
PCI-E
PCI-X
None of the above
Both PCI-E and PCI-X (*)
Correct
78. When a user is assigned platadm privileges, which tasks can they perform? Mark for Review (1) Points
Assign hardware to domains
Perform domain power operations
View all platform states
All of the above
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Support Readiness Training� for more information.
79. Which command shows you which version of firmware you are running? Mark for Review (1) Points
<tt>version</tt> (*)
<tt>uname -a</tt>
<tt>showfirmware</tt>
<tt>showversion</tt>
Correct
80. Which of the following functions does the <tt>addboard</tt> command NOT perform? Mark for Review (1) Points
Configure the board with the Solaris OS
Modify the DCL (*)
POST test the board
Assign the board
Correct
81. Which is the correct classification for the motherboard in the M4000 and M5000 servers? Mark for Review (1) Points
All of the above
Cold replacement (*)
Active replacement
Hot replacement
Correct
82. What command do you execute to power on all of the completely set up domains ? Mark for Review (1) Points
<tt>poweron all</tt>
<tt>poweronall</tt>
<tt>poweron -a</tt> (*)
<tt>power -on -all</tt>
Correct
83. What does the <tt>setdcl</tt> command set? Mark for Review (1) Points
Domain configuration list
Domain control list
Domain component list (*)
None of the above
Correct
84. Which of the following capabilities does a user created with useradm privileges not have? Mark for Review (1) Points
Assign domain hardware (*)
Change a user's password
Create user accounts
Change a user's privileges
Correct
Sun External I O Expansion Unit Installation and Administration(Answer all questions in this section)
85. What Solaris OS supports the Sun External I/O Expansion Unit? Mark for Review (1) Points
. Solaris 7
. Solaris 9
. Solaris 10 (*)
. Solaris 8
Correct
86. At revenue release of the Sun External I/O Expansion Unit what hosts will be supported? Mark for Review (1) Points
. Sun SPARC Enterprise M4000, M5000, M8000, and M9000 (*)
. Sun Fire T1000 and Sun Fire T2000 servers
. Sun Fire X4100 and Sun Fire X4200 servers
Netra T2000 Server
Correct
87. Which of the commands can be executed from OpenBoot PROM (OBP) to view the Sun External I/O Expansion Unit device paths? Mark for Review (1) Points
. pwd
. show-devs (*)
. ls
. cfgadm
Correct
88. Where are the two link cards of a link kit installed?Mark for Review (1) Points
. One in the host PCI-X slot and the other in slot 1 of the I/O Boat
. One in the host PCIe slot and the other in slot 1 of the I/O Boat
. One in the host PCI-X slot and the other in slot 0 of the I/O Boat
. One in the host PCIe slot and the other in slot 0 of the I/O Boat (*)
Correct
89. What does a flashing management link LED at 0.3 MHz on both link cards mean? Mark for Review (1) Points
. I/O Boat link card failure
. Host link card failure
. Link cable failure (*)
. Host link slot failure
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
90. What can you use for strain relief and routing of I/O cabling? Mark for Review (1) Points
. Rack brackets
. Tie wraps to the rack
. Dongles
. Cable management bracket (*)
Correct
91. Which component feature is in the PCI-X I/O Boat but NOT in the PCIe I/O Boat? Mark for Review (1) Points
. Link card slot
. Six PCI-X I/O adapter slots (*)
. Overtemperature indicator
. Six PCIe I/O adapter slots
Correct
92. When the carrier is removed from the boat how do you unlock the carrier handle? Mark for Review (1) Points
. Push on the carrier handle tab on the front of the carrier.
. Push on the carrier handle tab on the bottom of the carrier. (*)
. Pull back on the carrier handle.
. Push on the carrier handle tab on the top of the carrier.
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
93. Which two of the following are features of the Sun External I/O Expansion Unit? (Select 2) Mark for Review (1) Points
(Choose all correct answers)
. Supports either optical fiber or copper interconnect link to a host (*)
. Supports an Infiniband interconnect link to a host
. Supports PCIe and PCI-X adapters (*)
. Supports three I/O Boats
. Contains a service processor
Correct
94. Each I/O Boat has which of the following slots:Mark for Review (1) Points
. One link slot and six I/O adapter slots (*)
. Two link slots and four I/O adapter slots
. One link slot and seven I/O adapter slots
. One link slot and eight I/O adapter slots
Correct
95. Why must the carrier handle be in the closed position in order to install the link card in slot 0? Mark for Review (1) Points
. To make it easier to hold the handle while sliding the carrier into the slot
. To better align the card within the carrier
. To make sure the card is turned off
. To allow for a clearance between the card and slot connectors (*)
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
96. Which step is not needed to replace an I/O Boat? Mark for Review (1) Points
. Disconnect the I/O adapter cables.
. Unmount the chassis from its rack (*)
. Disconnect the link cables.
. Power down the I/O Boat and disconnect its power cabling.
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
97. The I/O Boats and power supplies connect to: Mark for Review (1) Points
. Each other
. The Backplane
. The power distribution unit
. The Centerplane (*)
Correct
98. Where can driver updates for the third-party vendor I/O adapters be found? Mark for Review (1) Points
. http://sunsolve.sun.com
. http://sun.com
. Vendor's web site (*)
. No updates are needed
Correct
99. Which fault management utility can be used to display Sun External I/O Expansion Unit error messages? Mark for Review (1) Points
. log
. dumplog
. fmdump (*)
. ioxadm
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
100. Which software package contains the PCIe drivers for the sun4u platform? Mark for Review (1) Points
. SUNWpci.u
. SUNWsams.u
. SUNWiris.u
. SUNWcakr.u (*)
Correct
101. The link cards use which type of protocol for the data path? Mark for Review (1) Points
. Fibre Channel
. USB
. PCIe (*)
. PCI
Incorrect. Refer to the Sun External I/ O Expansion Unit Installation and Administration training for more information.
102. How many power sources are recommended for the Sun External I/O Expansion Unit? Mark for Review (1) Points
. Two (*)
. Three
. One
. Four
Correct
ESD Prevention(Answer all questions in this section)
103. Low humidity environments reduce the voltage generated from friction and moving, Mark for Review (1) Points
True
False (*)
Correct
104. What is the difference between a soft failure and a hard failure? Mark for Review (1) Points
Hard failures represent 80% of all failures
Soft failures weaken components and is difficult to detect. Hard failures are easy to identify and trace back to ESD. (*)
Soft failures occurs in the software. Hard failures occurs in the hardware.
Soft failures are easily detected and rapidly fixed. Hard failures are difficult to identify and fix.
Correct
105. Which of the following is NOT one of the rules for preventing ESD damage? Mark for Review (1) Points
Store and transport ESD-sensitive items in static-shielding containers
Handle electronic components only when you are properly grounded
Keep items away from electronic components
Make sure your grounding straps are not in contact with your skin. (*)
Correct
106. Standing up can generate up to 1,400 volts. Mark for Review (1) Points
True (*)
False
Correct
107. Why are ESD "soft failures" the most serious type of failures? Mark for Review (1) Points
The damage is immediate and easily detected
The damage is not immediately noticed or detected (*)
They represent 60% of failures
They represent 40% of all failures
Correct
108. The leading cause of semiconductor failure is due to?Mark for Review (1) Points
Damage during shipments
The increased use of 45nm technology in manufacturing semiconductors
Incorrect power supply used with the system
Electrostatic discharge (*)
Correct
109. Which of the following descriptions best defines ESD?Mark for Review (1) Points
The ability of a part to withstand a static charge without failure.
The failure of an item that would result in failure of the system.
The sudden transfer, or discharge, of electricity from one object to another. (*)
Damage to system components due to the use of an incorrect power supply
Correct
110. Which items generate static electricity? Mark for Review (1) Points
Work surfaces
Clothing
People
All of the above
Incorrect. Refer to the ESD Prevention training for more information.
111. How often is the EIS-DVD released? Mark for Review (1) Points
Once a year
Once a month (*)
Twice a month
Once a quarter
Correct
112. True or False? EIS is an optional service for installations carried out by Sun staff and their installation partners. Mark for Review (1) Points
True
False (*)
Correct
113. The EIS Methodology is a set of standards, processes, tools, and documentation that helps an installation team perform installations of Sun equipment in a consistent manner and provides them with a set of installation best practices for perfoming what particular installations? Mark for Review (1) Points
Currently concentrating on Solaris for Sun storage only
Currently concentratin on Solaris for Solaris for x86 platform servers only.
Currently concentrating on Solaris for SPARC platfor only
Currently concentraing on Solaris for SPARC platform, Solaris for x86 platform servers, and Sun storage (*)
Correct
114. The EIS Standard - Basic Solaris: Mark for Review (1) Points
Defines a method for achieving a consistent installation for Sun Systems.
Mandates that installers use the EIS-DVD during the installation process.
All of the above. (*)
Requires the installer to use the appropriate EIS installation checklists when installing Solaris
Correct
115. EIS technical installation checklists are available for: Mark for Review (1) Points
Servers, Storage, Software items (*)
Servers, Storage, Appliances
Workstations, Servers, Storage
Servers, Workstations, Software items
Correct
116. EIS-DVD: (Select all that apply) Mark for Review (1) Points
Includes patches for Sun software required in most installations
Includes scripts to carry out standard settings and to unpack and install the patches
Includes programs and tools, such as explorer and Griffon
Enables the systems to be installed consistently and without need for internet connectivity
All of the above (*)
Correct
117. Global EIS Web contains: Mark for Review (1) Points
Patches and SunSolve information
Information, links, downloads, detailed training, and success stories (*)
Sun System Handbook links and links to heep://docs.sun.com
All of the above
Correct
118. The grounding standard states that: Mark for Review (1) Points
A system should not experience a maximum positive or negative temperature gradient of more than 2 degrees Celsiuls or 4 degrees Farenheit per hour.
Processes are in place to ensure that equipment is not damaged due to improper handling or climage changes between transportation and the final destination.
All server installations are to be properly grounded according to the methods described in the appropriate Sun hardware documentation. (*)
A clean data center environment must be maintained: systems should be unpacked outside of the data center, and then moved into the center.
Correct
119. True or False? The Boot Disk Layout and Mirroring Standard is intended to help installation planners format their boot disks in a consistent and supportable manner. Mark for Review (1) Points
True (*)
False
Correct
120. Where are the major changes between EIS-DVD revisions found? (Select all that apply() Mark for Review (1) Points
(Choose all correct answers)
On the EIS web site (*)
In the history .txt file on the DVD (*)
In the changes.txt file on the DVD
None of the above
Correct
121. EIS consists of how many standards? Mark for Review (1) Points
3
5
6 (*)
4
Incorrect. Refer to the Using EIS Methodology training for more information.
122. The EIS cabling standard states that: Mark for Review (1) Points
The fields designate the cabinet, insertion point, board, slot, and port.
All of the ablve (*)
Cables must be labeled at both ends (identically).
Cable labels consist of two lines of text, each containing up to five fields.
A customer's existing cable labeling scheme can be used if it meets the EIS requirements.
Correct
123. During the Project Initiation step: Mark for Review (1) Points
The purpose is to define details such as hostnames, IP addresses, and boot disk layout for the new systems. Furthermore , the test that will be performed during customer handover are defined.
You ensure that explorer (with the instinfo option) has been run and the explorer data file has been uploaded in the correct configDB.
A project can range from a single server installation to a complex internation configuration involving multiple sites, servers, storage, and services. (*)
Customer details, the installation team, Radiance case numbers, and order number (as appropriate) are documented.
Incorrect. Refer to the Using EIS Methodology training for more information.
124. True or False? EIS is a living process and is constantly being updated to keep abreast of our products and latest knowledge. Mark for Review (1) Points
True (*)
False
Correct
125. True or False? The EIS DVD contains optional up-to-date patches and utilities sometimes needed during the installatoin procedure.Mark for Review (1) Points
True
False (*)
Correct126. True or False? The EIS Methodololgy can be applied to other post-installation activities such as a Solaris OS upgrade. Mark for Review (1) Points
True (*)
False
Correct
127. During the EIS Compliance Sign Off step: Mark for Review (1) Points
Obtain project signoff and handover of project documentation
Follow the additional steps through PS or Partners. In WINGS, this depends on the availablility of templates reflecting these services.
Perform the system tests as defined.
Create customer documentation and hand over for signoff. (*)
Correct
128. True or False? EIS does not and cannot cover every single product available from Sun. Mark for Review (1) Points
True
False (*)
Correct
129. Planning is a very important phase of a successful installation and helps determine, and confirm, the deliverables with the customer. What tool is used for this type of work? Mark for Review (1) Points
CapacityTOOL
EISplan
INSTALLplan
WINGS (*)
Correct
130. True or False? Enterprise installation Standards (EIS) is a methodology that ensures consistent, high-quality, cost-effective Sun systems and storage installations for Sun customers. Mark for Review (1) Points
True (*)
False
Correct
1. Which of the following is not a function of the service processor (XSCFU)? Mark for Review (1) Points
Configures and monitors the platform
Provides system console
Manages Capacity on Demand
Acts as an OS installation server for the domains*
Correct
2. How many Physical System Board sets (PSBs) can reside in a M9000-64 server? Mark for Review (1) Points
Twenty-four
Four
Eight
Sixteen*
Correct
3. What is the minimum processor speed that the Jupiter bus supports? Mark for Review (1) Points
2.5 GHz
2 GHz
1.5 GHz
1.75 GHz
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Overview and Architecture� training for more information.
4. What type of PCI cards do the M4000 and M5000 servers support? Mark for Review (1) Points
PCI-E
PCI-X
Both PCI-E and PCI-X*
None of the above
Correct
5. How many rack units (RUs) does the M4000 server utilize? Mark for Review (1) Points
12 RU
10 RU
8 RU
6 RU*
Correct
6. How many Physical System Board sets (PSBs) can reside in a M8000 server? Mark for Review (1) Points
Four*
Sixteen
Twelve
Eight
Correct
7. How many service processors do the entry-level and mid-range MX000 servers have? Mark for Review (1) Points
2
3
1*
0
Correct
8. How many domains can you configure in a fully loaded M8000 server? Mark for Review (1) Points
Four
Twenty-four
Eight
Sixteen*
Correct
9. Which of the following is a true statement? Mark for Review (1) Points
None of the above.
CPUs and memory reside on different boards in the mid-range servers.*
CPUs and memory reside on the same board in the mid-range servers.
CPUs and memory reside on different boards in the high-end servers.
Correct
10. What type of CPUs do the Sun SPARC Enterprise MX000 servers support? Mark for Review (1) Points
UltraSPARC III/IV
UltraSPARC T1
SPARC64 VI/VII*
UltraSPARC I/II
Correct
11. What is a physical system board composed of? Mark for Review (1) Points
Memory and I/O
CPU, Memory, and I/O*
CPU and memory
CPU and I/O
Correct
12. How many cores does each SPARC64 VI CPU have? Mark for Review (1) Points
Two*
Six
One
Four
Correct
13. What are the maximum number of high-density disk drives that can reside in a high-end server's IOU? Mark for Review (1) Points
Four*
Six
Two
Eight
Correct
14. How many server products make up the Sun SPARC Enterprise MX000 server line? Mark for Review (1) Points
Two
Four
Five*
Eight
Correct
15. What type of processors does the M3000 server support?Mark for Review (1) Points
both SPARC64 VI and SPARC64 VII
UltraSPARC IV
SPARC64 VII*
SPARC64 VI
Correct16. What type of PCI cards do the M8000 and M9000 servers support? Mark for Review (1) Points
PCI-E*
PCI-X
Both PCI-E and PCI-X
None of the above
Correct
17. What are the possible configurations for an extended system board (XSB)? Mark for Review (1) Points
dual-mode and quad-mode
uni-mode and dual-mode
uni-mode, dual-mode, and quad-mode
uni-mode and quad-mode*
Correct
18. What are the maximum number of memory boards (MEMBs) that a M5000 server supports? Mark for Review (1) Points
Six
Four
Eight*
Two
Correct
19. Which of the following statements is correct in defining the purpose of the Service Processor in the MX000 servers? Mark for Review (1) Points
It monitors power to the system.
It allows you to configure domains.
It is an ASIC that provides an interface between the MACs, the CPUs, and the I/O controllers.*
It provides console to the domains.
Incorrect. Refer to the �Sun SPARC Enterprise MX000 Server Overview and Architecture� training for more information.
20. What type of interconnect is used in the MX000 server line? Mark for Review (1) Points
Sun Fire
Jupiter*
Infiniband
UPA
Correct
21. Which of the following servers uses the crossbar unit, XBU? Mark for Review (1) Points
high-end MX000 servers*
mid-range MX000 servers
the entire range of MX000 servers
entry-level MX000 servers
Correct
Creating Customer Value(Answer all questions in this section)
22. This online assessment tool is designed to share Global Software Support good practices across 5 domains - Strategy, Process, People, Technology and Governance � with the goal to help customers get maximum value from their Oracle investments Mark for Review (1) Points
Sustaining Support
Customer Success Self-Assessment*
Customer Services Catalog
Transfer of Information (TOI)
Newsletters
Incorrect, refer to the Creating Customer Value training for more information
23. To customize the Regions on the Main Dashboard you can drag-and-drop those you want included and rearrange them according to how you want them to show up. Within the Content of a Region you can do the following: (Choose all that applies) Mark for Review (1) Points
(Choose all correct answers)
Each region is context-sensitive with right-click menus.
Minimize or maximize the region
Group the content within the region
Export directly to a CSV file or Print a view.
Resize, re-order, sort, add or remove the region
Incorrect, refer to the Creating Customer Value training for more information
24. The Inventory and Usage region is available even for those who are not using the Configuration Manager. Mark for Review (1) Points
True
False*
Corrrect
25. It is an integrated, multichannel, online collaboration portal that leverages the latest Web 2.0 technologies to provide real-time access to Oracle�s knowledge repository. It is a venue where customers exchange knowledge with an extensive network of peers and Oracle experts. Mark for Review (1) Points
Configuration manager
My Oracle Support Community*
DB Upgrade companion
Maintenance Wizard
Support Diagnostics Tools
Corrrect
26. Identify the support model described: This support model centered around reactively working customer issues. You work with support on the issue, identify a solution, and then move to implement that solution. Mark for Review (1) Points
Traditional support model
Pro-active support model
Predictive support model
None of the above
All of the above
Incorrect, refer to the Creating Customer Value training for more information
27. Product Information Centers are one stop shops maintained within our knowledge base that contain information about specific products and releases. Mark for Review (1) Points
True*
False
Corrrect
28. This a a resource available in oracle.com that provides full list of services, which presents to customers the complete portfolio of Oracle Customer Services making it easier to find the right services based on their solution lifecycle needs. Mark for Review (1) Points
Lifetime Support Policy
Newsletters
Customer Services Catalog
Sustaining Support
Transfer of Information (TOI)
Incorrect, refer to the Creating Customer Value training for more information
29. This is another resource available to customers designed to promote awareness and understanding of the available support tools and resources to allow you to get the most out of your support investment. Mark for Review (1) Points
Customer Services Catalog
Support Process and Tools advisor webcasts*
Transfer of Information (TOI)
Newsletters
Sustaining Support
Corrrect
30. This training resource is built for practical real-world situations, allowing you to gain valuable hands-on experience as well as use the presented solutions as the foundation for production implementation, dramatically reducing time to deployment. Mark for Review (1) Points
Sustaining Support
Oracle By Example (OBE)*
Customer Services Catalog
Newsletters
Transfer of Information (TOI)
Corrrect
31. It is a support capability that automates the exchange of configuration information between Oracle Support and our customers, enabling proactive detection of issues our customers may encounter, and allowing for faster resolution times in instances where you do run into an issue. Mark for Review (1) Points
Change assistant
Upgrade wizard
Configuration Manager---*
Remote Diagnostcs Agent
Support Diagnostics tool
Corrrect
32. This stage of Life time Support provides technical support, including access to our online support tools, knowledge bases, and technical support experts. It is available for as long as you license your Oracle products. Mark for Review (1) Points
Lifetime Support Policy
Premier Support
Extended support
Sustaining Support *
None of the above
Corrrect
Oracle's Lifetime Support Policy(Answer all questions in this section)
33. While in Sustaining Support, the pricing is equal to pricing as if in Premier Support Mark for Review (1) Points
True*
False
Corrrect
34. Lifetime Support supports you at Every Stage of the Applications Life Cycle Mark for Review (1) Points
True*
False
Corrrect
35. Premier Support Extends for how many years after a product's release? Mark for Review (1) Points
5 years*
8 Years
No limit
10 years
1 Year
Corrrect
36. which year was TSANet established? Mark for Review (1) Points
1990
1992
1993*
1991
1994
Correct
37. which are TSANet relationship levels? Mark for Review (1) Points
(Choose all correct answers)
Closed Group Agreements
Classic or Standard Community
Open Group Agreements
Mission Critical Community
Incorrect. Refer to the Multi-Vendor Support Program Overview training for more information.
38. MVSP can be a replacement for support Mark for Review (1) Points
True
False*
Correct
39. Under MVSP model, customer call a vendor for a problem. While the support analyst decides involvement from another vendor, he will log SR to another vendor, then customer follow the SR to another vendor. Mark for Review (1) Points
True
False*
Correct
40. A "Mutual Customer" under the Multi-Vendor Support Program must have an active support contract with BOTH Oracle and a participating Partner. Mark for Review (1) Points
True*
False
Correct
41. Which of the following is not normally provided via My Oracle SupportMark for Review (1) Points
Certification information
Diagnostic Tests
Certified Advantage Partner Criteria*
Access to SR logging
Correct
42. Which of the following does not apply to Oracle Collaborative Support? Mark for Review (1) Points
Used by Support Engineers for problem verification
Accessed via My Oracle Support
Used by Support Engineers to demonstrate functionality*
Used by Support Engineers for real time viewing of error messages and log and trace files
Correct
43. What is Oracle's on-line Support Service? Mark for Review (1) Points
Service Request
OPN
Premier
My Oracle Support*
Correct
44. True or False? The first level of escalation will bring Support Management attention to your SR Mark for Review (1) Points
True*
False
Correct
45. What does escalating a SR mean? Mark for Review (1) Points
Increasing the severity
Referring to your Oracle Account Manager
Arranging on-site assistance
Bringing Support management attention to the problem*
Correct
46. What can you expect following an escalation request? Mark for Review (1) Points
Support Engineer passes SR to another engineer
Oracle Consultant onsite within 24 hours
Oracle Support manager telephones you to discuss your problem and agree to an action plan
24x7 working until problem resolved
Incorrect, refer to the Oracle Support Basics training for more information
47. How long will a Oracle Collaborative Support session last? Mark for Review (1) Points
Up to 5 minutes
Will take 20 minutes butmaybe dependent on the engineer who is doing the OCS.*
Up to 1 hour
Unlimited
Correct
48. What is the most effective way to escalate a SR?Mark for Review (1) Points
Via your Oracle Account Manager
Update My Oracle Support
Update SR in My Oracle Support and then call into Support*
Call into Support
Correct
49. If you wish to escalate further up the Oracle Management chain what must you have in place? Mark for Review (1) Points
Escalation contacts further up your internal organisation
An additional business case
Authorisation from your Oracle Account Manager
OCS session arranged
Incorrect, refer to the Oracle Support Basics training for more information
My Oracle Support Community(Answer all questions in this section)
50. This tab in My Oracle Support community is a way for you to organize and easily find community content. Mark for Review (1) Points
Discussions and Documents tab
Tags tab*
People finder tab
Profile tab
Private Messages tab
Correct
51. In the Rewards and Recognition Program of the My Oracle Support Community, the User Reputation Model calculates points based on member participation, document contribution, as well as customer and partner feedback. Mark for Review (1) Points
True
False
Incorrect. Refer to the My Oracle Support Community training for more information.
52. In My Oracle Support content this represents a collection of Communities. Often, organize in a tree structure so members can easily find the topics which are listed. Mark for Review (1) Points
Threads
Categories
Community
Discussions
Messages
Incorrect. Refer to the My Oracle Support Community training for more information.
53. Collaborative Support is the ability to rapidly resolve service incidents in customer environments through a collaborative resolution model (commonly known as a Community). Mark for Review (1) Points
True
False
Correct
54. This tab in My Oracle Support community allows you to search or browse for other members of the community Mark for Review (1) Points
Profile tab
Private Messages tab
People finder tab*
Tags tab
Discussions and Documents tab
Correct
55. This business tool - My Oracle Support Community gives
you:- Mark for Review (1) Points
(Choose all correct answers)
Immediate access to an extensive network of resources to locate answers to your questions*
access to Oracle experts, industry peers, and an aggregate of knowledge resources*
Access to resolution information Support as well as the robust search capability against collective community knowledge.*
A venue to share best practices and knowledge with peers and experts.*
None of the above
Correct
56. When you enroll for a free eSeminar, the Conference Key is sent through a confirmation email. Mark for Review (1) Points
True*
False
Correct
57. Your system must meet the following requirements to be able to run Oracle Web Conferencing Mark for Review (1) Points
(Choose all correct answers)
Pop-up blocking must be disabled in your browser*
Microsoft Virtual Machine (VM) or Sun JRE*
Internet Explorer 5.5 or later*
Windows 98 or later*
1024 x 768 screen resolution*
Correct
58. Oracle Collaborative Support is accessed via which of the following: Mark for Review (1) Points
My Oracle Support*
Oracle.com
OPN
Google Tools
None of the Above
Correct
How to Escalate a Service Request within Oracle Support(Answer all questions in this section)
59. If you wish to escalate further up the Oracle Management chain what must you have in place? Mark for Review (1) Points
Escalation contacts further up your internal organisation*
Authorisation from your Oracle Account Manager
An additional business case
OCS session arranged
Correct
60. You should consider escalating an SR when Mark for Review
(1) Points
(Choose all correct answers)
you encounter a critical roadblock*
you are dissatisfied with the resolution or response to a Service Request*
the SR was raised with the wrong severity
Project deadline is within 10 days*
All of the above
Correct
61. Not having answers or know how to obtain information in a timely manner contribute to customer frustration. Mark for Review (1) Points
True*
False
Correct
62. Which of the following statements are true and will make happy customers more happier. (Select all that applies). Mark for Review (1) Points
(Choose all correct answers)
Most customers gladly will accept any documentation or materials you believe may help them utilize their software more efficiently.*
Understand your customers� plans for future utilization, expansion and make the appropriate recommendations for upgrading to newer or different software or releases.*
Provide your customers with new product or service information before it is widely disseminated.*
Keep track of the things you have done in the past to make them happy; d
o more of the same*
Strive toward making your relationships with your customers true partnerships rather than that of just a vendor-customer*
Correct
63. Understand the difference between what your customers want and what your customers need helps provide positive customer experience. Providing targeted information and advice they can use them to focus more on what they need than on what they think they want. Mark for Review (1) Points
True*
False
Correct
64. To define the difference between mediocre companies, poor performers and Market Leaders Mark for Review (1) Points
(Choose all correct answers)
Understand the concept that business cannot exist without satisfied customers who help sustain revenues*
Understand the difference between customer�s needs and wants*
Set reasonable and measureable expectations with their customers*
Know when to say no professionally to customer requests and providing alternate solutions*
Create world-class customer contact*
Correct
65. A great deal of customer escalations can be prevented by awareness of customer on knowing what to expect. . Mark for Review (1) Points
True*
False
Correct
66. What the customers want? Customers want and expect the following from Oracle and it�s partners. Select all that applies. Mark for Review (1) Points
(Choose all correct answers)
Be the Center of Attention when they have Needs � they want to feel they have priority and attention when issues arise.*
expect us to be proactive and to anticipate their wants and needs*
staff needs to be proficient in all available communication options and know when to appropriately use each*
Effectively read customer�s preferred communication style*
None of the above
Correct
67. To help build an effective customer service model for your business it�s important to identify and build an effective communication and knowledge model based on the similarities and common characteristics of your customers. Mark for Review (1) Points
True*
False
Correct
top related