3m™ novec 1230™ model nfg & nfd fire suppression systems installation instructions ... · 2016....

3M™Novec1230™

ModelNFG&NFDFireSuppressionSystems

InstallationInstructionsOwner’sManual

Thismanualisanintegralpartofthesystemapprovalandthesuppressionsystemmustbeinstalledandmaintainedinaccordancewithalllistedrequirements.

FMapproved(3045669)

Readandcomplywiththeseinstructions,warningsandlimitationsbeforeinstalling.

Suitableforuseon: NFG25-200Models: 20°F(-7°C)to130°F(54°C)NFD225-825Models: 20°F(-7°C)to130°F(54°C)NFD850-1800Models: 32°F(0°C)to130°F(54°C)

Alwaysmaintainthisowner’smanualnearbyforoperatorreference.

Owner’sManualPN:123-456,RevisionBPrintedintheUSA

PN:123-456,RevisionBPage2of28

WARNINGCONCENTRATEDAGENTANDBY-PRODUCTOFAPPLICATIONTOFIREARETOXIC.AVOIDBREATHINGOFFUMESORPROLONGEDEXPOSURE.ACCIDENTALDISCHARGEDURINGHANDLINGORINSTALLATIONMAYCAUSESERIOUSINJURY.BEFOREATTEMPTINGTOINSTALLTHISDEVICE,READANDCOMPLYWITHINSTRUCTIONS,WARNINGS,ANDLIMITATIONSCONTAINEDINTHISMANUAL.DONOTLIFT,CARRYORHANDLEBYSENSORVALVE/DETECTOR.THESENSOR/VALVEDETECTORISVISUALLYDESCRIBEDINFIGURE8OFTHISMANUAL.DONOTDROP.KEEPAWAYFROMHEAT.KEEPAWAYFROMCHILDREN.AMATERIALSAFETYDATASHEET(MSDS)ISINCLUDEDINTHISMANUAL.

WARNING

PRIORTOPERFORMINGMAINTENANCEWITHINTHEPROTECTEDROOM,ALWAYSINSTALLTHESAFETYPININTOTHESUPPRESSIONSYSTEMTRIGGERASSEMBLYTOAVOIDACCIDENTALDISCHARGE.UPONCOMPLETIONOFMAINTENANCE,REMOVETHESAFETYPINFROMTRIGGERASSEMBLY,ANDSTORETHESAFETYPININTHEHOLEOFTHERELEASEBRACKETBEHINDTHEACTUATORLEVERASABACK-STOPINFARTHESTHOLEFROMCABLE/HOOKASSEMBLY.

InstallationManualscurrentlyavailableinEnglish,German,Italian,andSpanish.Otherlanguagesavailablefromyourlocaldistributor.InstallationHandbüchermomentanverfügbaraufEnglisch,Deutsch,Italiener,undSpanisch.AndereSprachen,dieverfügbarsindvonIhremörtlichenVerteiler.

Manualesdelainstalaciónactualmentedisponibleeninglés,alemán,italiano,yespañol.Otrosidiomasdisponiblesdesudistribuidorlocal.Manualidiinstallazioneattualmentedisponibileininglese,tedesco,italianoespagnolo.Lealtrelinguedisponibilidalsuodistributorelocale

PN:123-456,RevisionBPage3of28

Index

Section Page(s)Warnings InsideCoverApplication/Limitations 4SystemOperations 5SupervisoryPressureSwitch 5SystemStatusIndicatorLightOperation 6PressureReliefAssembly(BurstDisk) 6Interactionw/EnginesandHVACVentilation 6Installation 7-15CylinderandMountingBracket 7–9CableAssembly 9-14SystemStatusIndicatorLight 15SystemMaintenance/Inspection 16-18Cylinders 16-17AgentWeight 17PressureGauge 18IndicatorLight 18GlassBulb(TemperatureSensor/Detector) 18CableInspection 19AdditionalServicing 19SpecificationTables 19-21“NFG”AutomaticandManual/Automatic 19“NFD”AutomaticandManual/Automatic 20-21Warranty 22MSDS–Novec1230 23-27ContactInformation 28

PN:123-456,RevisionBPage4of28

Application

Novec1230TM(1,1,1,2,2,4,5,5,5-NONAFLUORO-4-(Trifluoromethyl)-3-Pentanone),theextinguishingagentusedinallFire-Hawk“NFG”and“NFD”seriesfiresuppressionsystems,isasuitableEPAacceptedalternatereplacementforHalon.Novecisanelectricallynonconductiveandresiduefreeextinguishingagentthatrequiresnocleanup.Novec1230TMisalsoreferredtoasFK-5-1-2(dodecaflouro-2-methylpentan-3-one),afluoroketone.

Thesefeaturesandtheversatilityofdesignmakethe“NFG”and“NFD”seriesfiresuppressionsystemmodelsidealforabroadrangeofapplications.Theseapplicationswouldincludecommercialandindustrialusewhereelectricalorflammableliquidsarethelikelysourceoffire.Fire-Hawk“NFG”and“NFD”serieshavepassedarigidtestingprogramandcarryFactoryMutual(FMGlobal)approvalsforfiresuppressionapplicationsinmanyapplicationssuchasunoccupiedengineandgeneratorrooms,electricalandcomputerrooms,paintandflammablestoragelockers.

Limitations

Fire-Hawk“NFG”and“NFD”modelseriesNovecautomaticfiresuppressionsystemsaredesignedandtestedtoextinguishClassB(flammableliquid)firesinenclosedroomsonly.

Theprotectedspace(room)limitationsare:MinimumHeight:2Feet(.6m)MaximumHeight:14FT(4.3m)MaximumWidth:32FT(9.75m)

Anyopenings(doorsorpanels)willallowdischargingagenttoescapeandwillseriouslyaffecttheabilityofagenttoextinguishthefire.

Fire-Hawk“NFG”and“NFD”suppressionsystemsaredesignedtoinduceaminimumatmosphericconcentrationof5.85percentwithintheprotectedroom.Thisisequivalenttoa30%safetyfactorona4.5%MinimumExtinguishingConcentration(MEC).Inadditiontogasolineanddieselfuel,otherflammableliquidswithMECvaluesequaltoorbelow4.5%forNovec1230TMmaybeprotectedbyFire-Hawk“NFG”and“NFD”systems.

Thespecificationtablesinthismanuallisttheminimumandmaximumapprovedroomvolume(size)allowableforeachmodel(perNFPA2001,UL2166,FM5600*).Volumecanbedeterminedbymultiplyingtheroom’slengthxwidthxheightwhichequalsthevolumeincubicfeetormeters(LxWxH=V).*NFPA2001:StandardonCleanAgentFireExtinguishingSystems;UL2166:HalocarbonCleanAgentExtinguishingSystemUnits;FM5600:ApprovalStandardforCleanAgentExtinguishingSystemsModelsdescribedinthismanualarestockavailablein25CubicFeet(0.7Cubicmeters)intervals.Systemsareavailablein1CubicFeet(0.03Cubicmeters)intervalsifdesired.Exactcalculationsand/ormeasurementsoftheprotectedspaceshouldbeaccomplishediforderingthesemodels.TheSpecificationTableshowstheareaofprotectionrangeavailablefororderingwithineachbasicmodel.Forsimplicity,throughoutthismanual,onlythestocksizeswillbenoted.

NFGandNFDsystemsaredesignedforonlyonecylinder(singlenozzle)toprotecttheentirespace.Usingtwocylinderstoachievecombinedcoverageisnotacceptable.

CAUTION:NEVERINSTALLAUNITWITHAVOLUMERATINGLESSTHENTHEGROSSVOLUMEOFTHEROOMTOBEPROTECTED.DONOTDEDUCTFORENGINES,GENERATORS,REMOVABLETANKSOROTHEREQUIPMENT.

PN:123-456,RevisionBPage5of28

Fire-HawkoffersallmodelscomplianttoapplicableEuropeanDirectives.Systemswillbeshippedasrequested.ForordersrequestedcomplianttoCEdirectives,aDeclarationofConformance(DOC)shallbeincluded.

SystemOperations

Fire-HawkunitsdescribedinthismanualareautomaticallyactuatedbyatemperaturesensitiveULlistedglassbulbtestedinaccordancewithUL199.Thesebulbsaremanufacturedandtestedtobeactivatedataminimumtemperatureofapproximately175°F(79°C)whenimmersedinaliquidbathorapproximately220°F(104°C)whentestedusinganairbath.Theactualactivationtemperatureofthebulbinafirescenarioisinfluencedbynumerousfactorsincludingairvelocity,rateoftemperaturerise,airflow,location,etc.Thedischargetemperatureranges(approximate)areshowninthespecificationtable,pages20–21,andonthelabelattachedtoeachunit.ThesesystemshavebeentestedtoUnitedStatesCoastGuard(USCG),UL2166andFM5600requirementsforAutomaticExtinguisherUnitAutomaticOperationFireTests.*UL199:StandardforSafetyofAutomaticSprinklersforFireProtectionService.DischargeTemperatureRanges(approximate):NFG25–75:200 - 250°F(93-121 °C)NFG100–200:175-225°F(79–107°C)NFD225–1800:175-225°F(79-107°C)

CAUTION:INCASEOFSUPPRESSIONSYSTEMDISCHARGE,DONOTRUSHTOOPENTHEPROTECTEDROOM.THEPROTECTEDSPACEMUSTBEKEPTCLOSEDFORATLEAST15MINUTESTOALLOWTHEFIRETOBEEXTINGUISHEDANDSURFACESCOOLEDSUFFICIENTLYTOPREVENTREFLASH.STOPBLOWERSANDSECUREHATCHES.HAVEAPORTABLEEXTINGUISHERAVAILABLEANDUSECAREWHENOPENINGTHEROOM.

Avoidbreathingfirerelatedfumesorvapor.

Note:Itisimportanttoretainthedesignedvaporconcentrationwithintheroomtoinsurecompletefireoutage.Upondischarge,engines,generators,equipmentandallpoweredventilation(HVAC)mustbeshutdown.

SupervisoryPressureSwitch

Fire-Hawk“NFG”and“NFD”seriessuppressionsystemsareequippedwithafactoryinstalledpressureswitchwhichisintendedforcylinderpressuremonitoringandsupervisionandmayalsobeusedtocontrolotherelectricalfunctions(engineshutdown,airexchangeequipmentetc.).Whenusingthepressureswitchasanelectricaldisconnectforanyequipmentshutdownfunction,ameansofoverriding(bypassing,shunting)thepressureswitchmustbeprovidedinordertoreturntheaffectedequipmenttoanoperationalmodeaftersuppressionsystemdischargehasoccurred.Thepressureswitchisasinglepolesinglethrow(SPST)typethatisnormallyclosed(NC)withthesysteminthechargedcondition.Dischargeorlossofsystempressurewillreleasethecontactstoanopenstatetherebycuttingoffanyelectricalcurrentflow.Neverusepressureswitchforelectricalloadsoverratedcapacity.

SwitchSpecifications 4.0AMPSat12VDC, 2.0AMPSat28VDCForapplicationsrequiringlargerloadcapacities,contactthefactory.

PN:123-456,RevisionBPage6of28

SystemStatusIndicatorLightOperation

AllFire-Hawkpre-engineeredfiresuppressionsystemsarepackagedwithanindicatorlightandfaceplate.Systemapprovalrequiresthattheindicatorlight(unlessreplacedbyanotherFire-Hawkdevice:i.e.:displaypanel)mustbeinstalledforsystemsupervisionandoperatorawareness.Whenproperlyinstalled,activationofelectricalpowertothesystemwillilluminatethelightindicatingnormalchargecondition.Systemdischargeorlossofpressurewillimmediatelyturnofftheindicatorlight.Intheeventthattheindicatorlightisnotlitwhenpowerisapplied,checkforthefollowingconditions:

1. Checkpressureindicatorgaugeforproperrange.2. Checkfuseandindicatorlightandreplaceifdefective(lampreplacementsavailablefrom

factory).3. Checkforlooseelectricalconnections.4. RemoveandweighsystemcylinderasdescribedinSystemMaintenanceSectionofthe

manual.

PressureReliefAssembly(BurstDisk)

Allmodelsareprotectedfromoverpressureofsystem.NFGModels25–200andNFD225–825areprotectedbythedesignoftheglassbulbtemperature/pressurerelationship.Fire-HawkmaintainsaDepartmentofTransportation(DOT)SpecialPermit,DOT-SP-11598forthesemodels.

NFDModels850–1800haveadefinitepurposePressureReliefDevice(designedandmanufacturedperCGAS.1-1)installedonthemanifold.Donotremoveorperformanymaintenanceonthisdevice.Removingorlooseningthisdevicewillcausethecontentsunderpressuretoescape.

InteractionwithEngines,GeneratorsandPoweredVentilation(HVAC)

Fire-Hawkoffersoptionalcircuitinterruptsystemswhichwillautomaticallyshutdownrelayswhichmaybeusedtocontroldevicessuchasengines,generatorsandpoweredventilation(HVAC)upondischargeofthefiresuppressionsystem.Theyareavailablewith4,6or8controlcircuitsandoperatebetween9–32voltsDC.Shutdownmaybeaccomplishedbyinterruptionoftheelectricalcircuitpoweringthedevice.Relaycontactsareprovidedinnormallyopen(NO)andnormallyclosed(NC)states.Itistheresponsibilityofthesystemdesigner/installertocomplywiththefollowinginstructionsonDieselandGasolineEngines/Generatorsthattakeinairfromtheroom.

DieselEnginesorGenerators,PoweredVentilation(HVAC)

Thesystemshallbedesignedandinstalledsothattheengine(s),generator(s),andventilationlocatedintheprotectedspaceshutdownautomaticallyandafterdischargetheminimumrequireddesignconcentration(5.85percentNovec1230)mustremain.

GasolineEnginesorGeneratorsItisoptionaltoautomaticallyshutdowngasolineenginesandgenerators,butitishighlyrecommended.Inthecaseofengineroomfire,youmuststillmanuallyshutdownengine(s)orgenerator(s)beforeamanualdischarge,orimmediatelyafterautomaticdischargeofthefiresuppressionsystem.

ManualDischargeCapability

Modelswithmanualcableconnectionsaredesignatedas“M”followingthesystemsize.“M”designatesmanual/automatic.“A”alonedesignatesautomaticonly.

PN:123-456,RevisionBPage7of28

InstallationReadentireinstructionmanualandcylindernameplatepriortoinstallation.Theseinstallationinstructionsareintendedtocovermostnormalinstallations.Additionaltechnicalorapplicationinformationcanbeobtainedbycontacting:

Fire-Hawk–USAADivisionofGlobalTecSolutionsLLC

Baltimore,MarylandTel:(410)202-2347

Website:www.fire-hawksafety.comOnlyonesystem(cylinder)maybeusedtoprotectaroom.Ifmorethanonesuppressionsystemisusedtoachievetherequiredamountofagentconcentration,thereisnoguaranteethatseveralsuppressionsystemswillactuatesimultaneouslyaseachsuppressionsystemoperatesindependently.Severalsuppressionsystemsmaybeusedonlyifeachindependentsuppressionsystemiscapableofprotectingtheentirevolumeoftheroom.

CAUTION:1. DONOTINSTALLINANAREADESIGNATEDFOROCCUPANCY.2. ACCIDENTALDISCHARGEMAYCAUSESERIOUSINJURY.3. HANDLETHECYLINDERWITHEXTREMECARE.4. WEAREYEPROTECTION.5. DONOTLIFTORCARRYCYLINDERBYTHEMANIFOLDORACTUATOR

COMPONENTS.6. DONOTATTEMPTTOLOOSENORREMOVEANYSUPPRESSIONSYSTEM

COMPONENTS.I.CylinderInstallation:Step1Carefullyremovecylinderfromcartonandvisuallycheckfordamageinshipment.Step2Toensurethatthecylinderisoperational,boththeweightandpressureindicatormust

conformwiththecylinderspecificationasshownonthenameplate.Weighcylinder(lessbracket)onanaccuratecalibratedscalebeforeinstalling.Recorddateandweightontagprovidedforthispurpose.

Step3Do’sandDon’ts

DoplaceUnit: Don’tplaceunit:a. Ashighaspossible,nomorethan3feet

belowtheceiling,onroomwalljoistorstudformounting.

b. Withdetectorheadneartheareainwhichafireismostlikelytooccur.Thiswouldbeonthefuellinesideoftheengine,nearacarburetor,orfuelpump.

c. Atthecenterlineoftheroomwall.d. Verticalorhorizontalasdescribedper

model.e. Betweenthelikelyignitionsourceswhen

twoormoresourcesaretobeprotected.f. Avoidimmediateobstructionstothe

dischargeorifices.

a. Nearafreshairorventilationductsupplyopening.

b. Nearaccessdoor.c. Toundersideorinsideofaccessdooror

panel.d. Extremelyclosetoahighheatgenerating

deviceorexhaustsystem.e. Whereanaccumulationofstandingwater

couldblocksensororcausecorrosion.f. Onundersideofcoverorroomhatchthat

couldbethrownclearduetopossibleexplosion.

g. Onaceiling.h. Tooclosetoaroomcornerorlarge

obstruction.

PN:123-456,RevisionBPage8of28

Step4Loosenmountingbracketcylinderholdingstraps(Figure1)andremovecylinderfromracket.

Althoughthesensorvalve/detectorisprotected,careshouldbeexercisedtoavoidstrikingthesensorvalve/detector.

Figure1

WallMountingModelsNFG25-200andNFD225–NFD825maybeinstalledVerticalorhorizontalwiththefollowingangular/off-setlimitations.Verticalinstallationisrecommendedforoptimumperformance.Off-setisdefinedasthedistancebelowlevellinefromendofthebracket.Thedischargeorificespraypatternmustbeorientedawayfromthewallandtowardstheroom.SeeFigure2.

ModelsNFG25-100• Verticalinstallation.• Horizontalwithaminimum8degreeangleor1”(25.4mm)offsetbelowlevel.

ModelsNFG101-200• Verticalinstallation.• Horizontalwithaminimum5degreeangleor1/2”(12.7mm)offsetbelowlevel.Figure2

MODELSNFD225THRU825• Verticalinstallation.• Horizontalwithaminimum2.5degreeangleor1/2”(12.7mm)offsetbelowlevel.

MODELSNFD850–1800• VerticalInstallationOnly

PN:123-456,RevisionBPage9of28

WARNING:WHENINSTALLINGCYLINDERINHORIZONTALPOSITION,THEACTUATOR(TOPOFCYLINDER)MUSTNEVERBELOWERTHANTHEBOTTOMOFTHECYLINDERORPROPERDISCHARGEOFAGENTWILLNOTOCCUR(SEEFIGURE2ABOVE).Step5Locatebracketindesiredposition(Vertical-sensorValve/DetectorHeadUp,orHorizontal,

Figure2).Ensurewall,joistormountingsurfaceissolidenoughtoholdtheweightoftheunit.Fastenersarenotincluded.Usemediumstrength(Grade5,PropertyClass8.8)orbettergradematerial.Useminimum5/16”(M8)diameter[recommend3/8”(M10)diameter]fastenersforallbut130-249bracketassemblies.130-249minimumhardwaresizeis¼”(M6)diameter.Allmountingholesmustbeutilized.Seetablebelowforqtyandholesizeinrespectivebracket.Usingthebracketasatemplate,markanddrillholesinwallandinstallbracketensuringthatallfastenersarethoroughlytight.

Step6Carefullyattachcylindertobracket.Sensorvalve/detectorheadshouldpointtowards

centeroftheroom.Nameplateandgaugeshouldbevisible.Tightenbracketstrapssothatthecylinderbodyisfirmlyandsecurelyheldinplacebyitsbracket(wormdriveclampsmustbetorquedto75-85in-lbs.,(6-7ft.-lbs.).Ensure180°dischargeorificesdonotfacethewall.

Dependingonthemodel,thebracketstrapwillbedifferent:

Types Screwdrivecoil,Phillips/hexdrive.----------NFG25–200andNFD201-825

Twopiecebracket/saddleassembly.---------NFDmodels825-1800.

BracketsModel Assembly MountingHoles

(QtyxDia)NFD225-300 130-251 4x.39”

(9.9mm)

NFD325-400 130-252NFD425-525 130-253NFD550-675 130-254NFD700-825 130-777NFD850-1800 130-009 13x7/16”

(10.7mm)

II.CableAssemblyInstallation

CAUTION:TOAVOIDKINKINGOFCABLE,DONOTPUSHCABLETORETRACTTHECORE.

ModelSMAC-#XX(PN:136-#XX)isrequired.

CAUTION:TOPREVENTACCIDENTALDISCHARGEDURINGCABLEINSTALLATION,VERIFYTHATTHEMANUALDISCHARGELEVERSAFETYPINISPROPERLYINSTALLED(SEEFIGURE6A–PAGE14).

Step1Selecttheproperlocationforremotepullstation.

a. Manualdischargereleasepullstationsshouldneverbeinstalledintheprotectedroom.b. Locatedischargepullhandleatthecontrolstationwithfullviewandeasyaccessbythe

operator.

BracketsModel Assembly Mounting

Holes(QtyxDia

NFG25 130-249 2x.29”(7.2mm)

NFG50-75 130-775 4x.39”(9.9mm)NFG100 130-805

NFG125-200 130-250

PN:123-456,RevisionBPage10of28

c. Theareaselectedmustbestructurallysecureandprovideatleasttwelve(12)inches(305mm)ofclearanceattherearofthepaneltofacilitatecablehardware.

Step2Installingcablealongroutingbetweencableends-a. Donotinstallcableinareawherethepossibilityofphysicalabuseislikely.Wherepractical,

followthesamecablepathasinstalledbyoriginalinstaller(ifareplacementcable).b. Routethecabletoallowittolieinitsmostnaturalstate.Thecumulativebendinthecablerun

mustneverexceed720degrees.Thisisequivalenttoeight(8)right(90°)angles.Useextremecarewhenbendingcabletoavoidkinking.Neverformabendwitharadiusoflessthanfive(5)inches(127mm).SelectionofthecorrectsizeFire-Hawkcablelengthwillreduceexcesscablecoil.

c. Positionthecableinitsrouting,butdonotsecureatthistime.Steps3Athru3Fmustbecompletedpriortosecuringcableinitsfinallocation.• Donotconnectcabletothecylinderatthistime

Step3Mountingcablefaceplateandrelease(T)handle.

Confirmfaceplatesuppliedwithcableand/orcylinderassembly.Thefaceplateheadingshouldbe“MANUAL/AUTOMATIC”(Figure3).

Manual/Automaticsystemsusefaceplate123-458

Figure3

a. Usingthemanualdischargefaceplate(Figure3,Figure4)asatemplate,markanddrilla13/32inch(10.4mm)hole.

b. Removetheprotectivebackingfromthefaceplate.Whilealigningtheholes,placeevenpressureuponthefaceplate.Toinsureagoodbond,thetemperatureshouldbeinexcessof50°F(10°C).

c. FollowingthediagraminFigure4,installthejamnutandlockwasheronthecableend–outer.Screwthejamnuttotheendofthethreads.Insertthecableendthroughthepanelandfaceplatehole.Pullthecableend–inner(threadedshaft)outtoitsfullesttravel.Installferrulebyscrewingontothecableend–outeruntilitbottomsout.Usepliersonthebackside–holdingthecableend–outerwhileturningtheferrule.Useplierswithrubbertipsorothernon-scratchinggrip.Donotovertighten.

d. Withcableend–inner(threadedshaft)outtoitsfullesttravel,placerubberO-ringoverthreadsonshaft.Holdthecableend-innerfromrotatingusingthesafetypinincrosshole(seeFigure4–Page11)orbyusingneedlenosepliers.InstalltheT-Handleonthecableend–inner,screwingitonuntilitbottomsout.Donotovertighten.

e. Pullonthecylinder(S-hook)endofthecabletoretractthehandleintotheferrule.ItmaybenecessarytoslightlypushontheT-handletoseattheO-ring.AlignthecrossholesintheT-

PULL HANDLE REMOVE PIN FOR MANUAL OPERATION

ELECTRICAL SYSTEMS FORCED VENTILATION UPON SYSTEM DISCHARGE, SHUT DOWN

MANUAL AUTOMATIC FIRE SUPPRESSION SYSTEM

WWW.FIRE-HAWKSAFETY.COM

ENGINE

TM

PN:123-456,RevisionBPage11of28

Handleandferruleandinsertthesafetypinthroughbothitemssothattheendofthesafetypinshowsoutthefarside.LeavethesafetypininsertedthroughtheT-handle/Ferrule,butdonotinstalltheredsafetytieatthistime.

f. TurntheT-handle/FerrulesothatthewordFIREisverticalororientedasneeded.g. Thisactionwillresultintheentirecablerotatingalongitslength.Ensurethatthecableis

allowedtorotateandremaininanaturalstate.h. Tightenthejamnutbehindtheinstrumentpaneltolockinthepositionandorientationofthe

T-handle/Ferrule.Step4Securingcableinplacea. Securethecablealongitslength.

i. Nyloncabletiesshouldbeusedforcablesecuring.Fastenandsupportthecableonstraightrunsonly.Donotsecureatlocationswherecablebends.

ii. Atthecylinder/actuatorS-Hookend:a. Thecableshouldhaveaminimumstraightlengthof6inches(15cm)beforemakingany

bends.Thecableshouldbesecuredonastraightrunbeforemakingabend.b. Thecableshouldbesecuredwithin6inchesto18inches(15cm–46cm)ofthecylinder.

Someflexibilitywillbeneededtomovethecableforservicingthecylinder.CAUTION:FAILURETOFOLLOWTHESEINSTRUCTIONSMAYPLACEUNDUEPRESSUREONTHEHAIRPINCOTTERPIN,CAUSINGITTOMALFUNCTION

iii. Donotinstallcableswithotherwiring.Donotusetiewirearoundthecables.

b. Temporarilyremovesafetypinandtestcableoperation.Neverpushcable.Pullfromcylinder(Shook)end,then,pullThandleandrepeat.Cablemustmovefreelywithoutfrictionorbinding.Reinstallsafetypinandconfirmthatreleasehandleisnowlockedinplace.

Figure4

CAUTION:ACCIDENTALDISCHARGEDURINGHANDLINGORINSTALLATIONMAYCAUSESERIOUSINJURY.DONOTREMOVEFACTORYINSTALLEDSAFETY(PULL)PINFROMCYLINDERSENSORVALVE/DETECTORUNTILINSTALLATIONISCOMPLETEDANDCHECKED.

CrossHole

InstrumentPanel

CableEndOuter

FacePlate

Nut

Washer

SafetyPin

Ferrule

O-ring

T-Handle

CableEndInner

PN:123-456,RevisionBPage12of28

Step5InstallationVerificationandTestRequirement.Specification/Regulation• NFPA12A-Operatingdevices.Para.1-8.3.7maximumof40lbs.offorcerequiredatThandle

(pullstation)toactivatesystemdischarge.• Fire-Hawk-minimumof10lbs.offorcerequiredattheShook(extinguisher)toactivate

systemdischarge.TestProcedure

CAUTION:DONOTPUSH(FIRE)T-Handlewhileinstallingcableassemblytoavoidkinkingthecablecore.PullS-HookatoppositeendtoretracttheT-Handle.

Aftertheinitialroutingofcableassemblyiscompleted:a. Attachascale(PN:128-212CableTestFixture)totheS-hook(cylinderend)inplaceofthe

cylinderReleaseassembly.b. Attachascale(PN:128-092DigitalScale)totheT-handle(pullstation)endofthecable

assembly.Ahandlehook,PN:128-115isavailabletofacilitateattachingthescale.(ScalesavailablefromFire-Hawkorothersmaybeused)

c. PullontheT-handlescale,monitoringthedisplayedforce,until10lbs(4.5Kg)isshownontheS-hook(cylinderend)scale.

d. EnsurethattherequiredforceattheT-handle(pullstation)doesnotexceed40Ibs.(18.2Kg)toachieve10lbs.(4.5Kg).i. Iflessthan40lbs.(atthepullstation)offorceachievesthe10lbs.(atcylinder),complete

thecableassemblyinstallationperStep6.ii. Ifgreaterthan40Ibs.offorcewasexertedtoachieved10lbs.,thecableroutingshouldbe

inspectedandlikelychanged.Repeatinspection.e. Removebothscales.PullontheS-Hookatthecylindertoretractthecable.f. Reinstallsafetypinandconfirmthatreleasehandleisnowlockedinplace.g. Attachthetamperresistantroundplastictietothesafetypinbypassingtiethroughthesafety

pinringandaroundthecableassembly.Inserttheendofthetieintocableendandpullupsnug.Thetieprovidesameansofdeterringaccidentaldischargeanddeterminingifmanualactuationhasoccurred.

CAUTION:DONOTUSENYLONCABLETIESINPLACEOFTHETAMPERRESISTANTTIEFORSAFETYPIN.

Note:Limitthequantity,andtightnessoftiedownstoavoidrestriction.Note:Amaximumof720°inturns,andnolessthanfive(5)inches(127mm)ofradiusperturnshouldbeutilized.Step6Connectingcableassemblytocylinder(Figure6).

Note:ThecablemaybeinstalledfromeitherdirectionusingtheexistingBi-Directionalhardwareinstalledonthesystem.

PN:123-456,RevisionBPage13of28

a. Confirmthatthecylinderismountedinitsbracket,thecablepullhandleendisinstalledand

thecableiscorrectlyroutedtothecylinder.b. Insertthe“S”hook[Fig5-A]intotheactuatorleverfromthefrontside(overtopofthe2

mountingscrewsintheReleaseBracket[Fig6-B].Afterthe“S”hookisconnectedtothelever,alignthegrooveinthecableend-outer[Fig5-B]withtheslotintheReleaseBracketassembly[Fig6-C].

c. InserttheHairpinCotterPinprovidedwiththecableintothereleasebracket,overtopofthecableend[Fig6-D].• Theremaybeaslightbend(bump)inthecablebetweenwhereitisattachedtothe

actuatorleverandwherethecableend-outerisclippedintotheReleaseBracket.Thisisnormal.

• Thereshouldnotbetensioninthecablepullingonthelever.Tensiononthelevercancausethecylindertodischargewhenthesafetypinisremoved.

d. WithStepcsuccessfullycomplete,usecaretoremovethefactoryinstalledsafetypinfromtheactuatorassembly[Fig6-E].

e. StorethesafetypinintheholeoftheReleaseBracketbehindtheactuatorleverasaback-stopinfarthestholefromcable/hookassembly[Fig6-F].

f. Ensurethesafetypiniscompletelyinstalledthroughthebracket.

WARNING–DONOTINSTALLTHESAFETYPINBETWEENTHELEVERANDTHECABLE.THISWILLPREVENTTHECABLEFROMACTUATINGTHESYSTEM.

g. Thefiresuppressionsystemextinguisherisnowfullyoperational.

CAUTION–ALWAYSINSTALLSAFETYPININCYLINDERACTUATORLEVER[FIG6-A]WHENPERFORMINGSERVICEORMAINTENANCEONSYSTEM.BESURETOREMOVESAFETYPINFROMACTUATORLEVERUPONCOMPLETIONOFSERVICING.Figure5--SMACCableS-HookEnd

CableEndOuter

S-Hook

B

A

PN:123-456,RevisionBPage14of28

BiDirectionalReleaseBracketCableConnection

Figure6

ReleaseBracket

RemovePinfromCylinder

HeadBi-Directional

ReleaseBracket(MiddleHole) Fig6-F

CylinderHead

SafetyPinisLocatedinCenterPosition

Fig6-A Fig6-B

CarefullyInsert“S”HookintoReleaseArm

Fig6-C Fig6-D

LockCableinPlacewithHairpinCotterPin

Fig6-E

ReleaseArm

LocatePinBehindReleaseArmasaBackstopinFarthestHolefromCable/HookAssembly

PN:123-456,RevisionBPage15of28

III.SystemStatusIndicatorLightInstallationSelectalocationatthecontrolstationonorneartheconsolethatisinfullview.Thelocationselectedmusthaveaccessforelectricalwiring.Removetheadhesiveprotectivecoverfrombackofindicatorfaceplateandattach.Forproperadhesion,surfacemustbecleananddryandtemperaturemustbeabove50°F(10°C).Usethepreformedfaceplateholeasatemplateandcarefullydrilla5/16inch(8mm)hole.Insertindicatorlightwire(seeFigure7).

CAUTION:PRIORTOWIRINGINDICATORLIGHT,TURNOFFELECTRICALPOWERBYSWITCHINGOFFCIRCUITBREAKER,REMOVINGFUSEORDISCONNECTINGPOSITIVEBATTERYTERMINAL.FAILURETODISCONNECTELECTRICALPOWERWHILEMAKINGELECTRICALCONNECTIONCANRESULTININJURYFROMFIREORELECTRICALBURNS.

Thestandardindicatorlightisratedfor12VDC(contactfactoryforothervoltages).Supplies,whicharenotincludedwithyourFire-Hawksystemandshouldbeathandbeforetheindicatorlightinstallation,areasfollows:

1. Five(5)amperein-linefuseandholder.2. Sufficientlengthofinsulatedminimum16AWGstrandedwire.3. Crimponwireconnectors.4. Crimppliers,handtools.

Attachonewireleadfromthein-linefuse(C)totheignitionterminalonthepowerlead(A).Connectotherleadfromthein-linefusetotheindicatorlight(D).Connectremainingindicatorlead(E)tooneoftheFire-Hawkcylinderpressureswitchconnectorwires(F).Connecttheremainingcylinderpressureswitchlead(G)tocommonground,whichmaybethenegativebatterybussatthecontrolpanel(seeFigure7).

CAUTION:ELECTRICALSYSTEMSVARYFROMONEINSTALLATIONTOANOTHERANDTHESEDIRECTIONSMAYNOTBEAPPLICABLEFORYOURINSTALLATION.SHOULDYOUHAVEANYDOUBTSOFSAFELYACCOMPLISHINGTHISINSTALLATION,CONTACTAQUALIFIEDELECTRICIANORFIRE-HAWKUSAAT(410)687-5500FORTECHNICALASSISTANCE.

Figure7

TM E

IndicatorLight

In-LineFuse

NegativeBatteryGround

G

FC

D

B A

Power+V

PN:123-456,RevisionBPage16of28

SystemMaintenance/Inspection

CylinderInspection/CylinderTesting

Thefollowinginstructionsareaccordingtoapplicableregulatoryagencies.Theseregulationschangeperiodicallyandmaybedifferentfromrulesinplacewhenthissystemandmanualwereshipped.ConfirmrequirementswithFire-Hawk,localauthoritieshavingjurisdictionorapplicableagency.Allinspectionsmustbeperformedbyanauthorized/Qualifiedinspector(CurrentRINforDOT)andotherrequirementsperlocalauthoritiesasapplicable.

NFPA2001–CleanAgentFireExtinguisherSystems:Allmodels,allcylinders:• Ifmorethan5yearshaselapsedsincethedateofthelasttestandinspection,thecylinder

shallnotberechargedwithoutretesting.Thetestshallbepermittedtoconsistofacompletevisualinspectionasdescribedin49CFR(explainedbelowpercylindertype).

• Cylinderscontinuouslyinservicewithoutdischargingshallbegivenacompleteexternalvisualinspectionevery5yearsormorefrequentlyifrequired.ThevisualinspectionshallbeinaccordancewithSection3ofCGAC-6,exceptthatcylindersneednotbeemptiedorstampedwhileunderpressure.

49CFR–Transportation(DOT)–CylinderRequalification(Hydrostatictestingviaproofpressureandvolumetrictesting;visualinspectionmethods)

ModelsNFG25–200builtwithDOT39NRC/TC-39Mcylinders.Thesearenon-refillableandarenon-reusable.Theydonotrequire/arenotallowedtobetestedforre-use.Thesystemsmayremaininserviceindefinitelyaslongasallotherserviceabilityrequirementsaremet.Systemswiththesecylinders,per49CFRrequirements,areclearlymarked,“Federallawforbidstransportationifre-filled–penaltyupto$500,000fineand5yearsimprisonment(49U.S.C.5124).

ModelsNFD225–825builtwithDOT3AL/TC-3ALMcylindersandModelsNFD850–1800builtwithDOT4BW/TC4BWweldedsteelcylinders.Bothofthesecylindertypesarereusableandmustbeperiodicallytestedandre-qualified.TheperiodicinspectionintervalforbothDOT3ALandDOT4BWcylindersfilledasaFiresuppressionsystemwiththeagentassuppliedis12yearsfromthedatestampedonthecylinder.However,acylinderfilledbeforeitsre-qualificationdate(becomesdue),andremainsfilled,mayremaininservicewithouttestinguntilitisemptiedforanyreason(reference49CFR180.205(c).

• CorrelationtoNFPA2001(5year)requirement.Inbothstandards,ifthecylinderisnotalreadyempty,itdoesnotneedtobeemptiedsolelyforinspectionpurposes.Ifthecylinderhasmorethan5yearsofservice,andhasbeenemptiedforwhateverreason,itneedstobeinspectedperNFPA2001guidelineslistedabove.

• ForDOT4BW/TC4BWMweldedsteelcylindersonly,avisualinspectioninaccordancewithCGAC-6orC-6.3,asappropriate,maybeperformedinsteadoftheperiodichydrostatictests.Whenthistestmethodisapplied,thesubsequentinspectioncomesdueafter5years.o ApplicabletestsmethodsforDOT4BWcylindersarebyProofPressureTestwhichyieldsa

subsequenttestrequirementafter7yearsandaVolumetricExpansiontestusingtheWaterJacketMethodwhichyieldsasubsequenttestrequirementafter12years.

• ForDOT3AL/TC3ALMcylinders,visualinspectionsarenotauthorizedtoreplacehydrostatictesting.o TheonlytestmethodforDOT3ALcylindersistheVolumetricExpansiontestusingthe

WaterJacketMethodwhichyieldsasubsequenttestrequirementafter12years.

PN:123-456,RevisionBPage17of28

MODEL W.O.XXXXXX NFDXXXMMANUAL/AUTO DISCHARGETEMPERATURERANGE:175-225F(79-107C) CONTAINS:X.XXLBS(X.XKG)NOVEC1230 MAXIMUMVOLUMEPROTECTED XXXCU.FT.(X.XCU.METERS) GROSSWEIGHT XXLBS.XOZS.(XXKGS) REPLACEIMMEDIATELYIFGROSSWEIGHT DECREASESBYXOZS.ORMORE MANUFACTUREDATE:XX/XXXXREV:X

MODEL W.O.XXXXXX NFGXXXAAUTOMATIC

CONTAINS:X.XXLBS(X.XKG)NOVEC1230 MAXIMUMVOLUMEPROTECTED XXXCU.FT.(X.XCU.METERS) GROSSWEIGHT XXLBS.XOZS.(XXKGS) REPLACEIMMEDIATELYIFGROSSWEIGHT DECREASESBYXOZS.ORMORE MANUFACTUREDATE:XX/XXXXREV:X

DISCHARGETEMPERATURERANGE:XXX-XXXF(XX-XXXC)

ForsystemscomplianttoEuropeanDirectives,(EC),specificcylindersmaybeuseddifferentthanDOT/TCapprovedsystems.Internationalrequirementsneedtobefollowedaswellasotherrequirementsaccordingtothelocalauthoritieshavingjurisdiction(AHJ).

ModelsNFG25-200withECapprovalaredesignatedas“CE”markedinaccordancewiththePressureEquipmentDirective(PED)97/23/EC.ThosecylindersarebuilttotechnicalspecificationseitherBSEN12205orISO11118.Thesesystemsarenotrefillable.Systemswiththesecylindersarenotserviceableandthereforehavenoperiodicinspectionrequirements.(ReferenceISO11118andPEDDirective97/23/EC).Modelswiththesecylinders,perEuropeanAgreementGoverningtheInternationalCarriageofDangerousGoodsbyRoad(ADR)requirements,areclearlymarked,“DONOTREFILL”.

ModelsNFD225–1800withECapprovalaredesignatedas“CE”markedinaccordancewiththePressureEquipmentDirective(PED)97/23/EC.Thesesystemsarerefillable.

- NFDmodels225-825haveseamlessaluminumcylindersbuilttotechnicalstandardseitherBSEN1975orISO7866.SystemswithπmarkedcylindersbuilttoISOstandard7866aretobemaintainedinaccordancewithISO10461,GasCylinders–SeamlessAluminum–AlloyGasCylinders–PeriodicInspectionandTesting.SystemswithπmarkedcylindersbuilttoBSEN1975aretobemaintainedinaccordancewithBSEN1802.

- NFDmodels850to1800haveweldedsteelcylindersbuilttotechnicalstandardEN13322-1.ThesecylindersneedtobemaintainedinaccordancewithBSEN1803.

Summarizingthesestandards,thereisnogeneralrequirementtoperiodicallyinspectacylinderifthecontentshavenotbeenused,evenifthetestintervalhaslapsed.Intheeventthatcontentshavedischarged,leakedorotherwisebeenexhausted,theinspectionintervalis10yearsfromthemanufacturedatestampedonthecylinder.TPEDDirective96/36/ECalsohasrequirementsforperiodicinspection.

WARNING:DONOTATTEMPTTODISASSEMBLEANYPARTORCOMPONENTOFTHEEXTINGUISHER.THISUNITISPRESSURIZEDANDSERIOUSINJURYCOULDRESULT.CONTACTTHEFACTORYORANAUTHORIZEDDEALERFORSERVICEINFORMATION.

AgentWeightInspection

Weighcylindertoinsureampleextinguisheragent(every6months,minimum).Allfiresuppressionsystemscontainingliquefiedgasrequireperiodicweighingtoensureafullychargedunit.Pressuregaugesindicatetheabilitytodischargetheagentbutnotthequantityofextinguishingagent.Thecylinder(lessbracket)mustbeweighedonatleastasemi-annualbasisandbereplacedimmediatelyifgrossweighthasdecreasedbythequantitynotedonthespecificationlabel.AninspectionTagissuppliedoneverynewcylinderforrecordingthisinspection.Thespecificationlabel(exampleshownbelow)identifiestheModelType,WorkOrder#,DischargeTemperatureRange,AgentWeight,MaximumVolumeProtected,GrossWeight,andManufacturerDate.

PN:123-456,RevisionBPage18of28

PressureGaugeInspection

Frequentlycheckgaugeforproperpressure,(every6months,minimum).

ReadingthePressureGauge(Inspection)Thegreensectionofthegaugeisdesignedtoshowproperfillingandpressurizationat70°F(21°C).Perapplicabledesignstandards,thisisdefinedas±10%ofnominalfillpressure.Fire-Hawksystemsareratedforoperatingtemperaturesfrom20°F(-7°C)or32°F(0°C)upto130°F(54°C).Note:Thisisstorageandambientoperatingtemperature.Afireconditionwouldobviouslyreachhighertemperatures,withthesystemactivatingat175°F(79°C)or200°F(93°C).

Theredsectionofthegauge,aboveandbelowthegreensection,indicatetheacceptablepressurereadingsfortemperaturesbelowandabove70°F(21°C).Thetablelocatedontheincludedtagsshowthepressureofthesystematcorrespondingtemperatures.Toinspectaunitwhentheambienttemperatureisotherthan70°F(21°C),measuretheambienttemperatureandfindthecorrespondingnominalpressureinthetable.Readthetipoftheyellowpointeranddeterminewhattheinternalpressureisbycountingthedivisionlinesandaddingorsubtractingforeachlinesegmentfromtheblackcenterlinemarked,500psi(34.3bar).(Eachlinesegmentwithinthegreenpieisequalto10psi(0.68bar).Eachlinesegmentwithintheredsectionsisequalto20psi(1bar).• Comparetheactualreadingtothereferencetableonthecardattachedtothecylinder.The

pressuresshouldbewithin±20psi(1bar)ofeachother(onesegment).• Note:thisallowancetakesintoaccountallowingforgaugemanufacturingtolerance,

temperaturereadingaccuracyandtheabilitytopreciselyseethepointerlocation.• Iftheyellowpointerisineitherthewhitezoneonthegauge,totheleft“REPLACE”ortothe

right“OVERCHARGE”,theunitislikelynotfunctionalandmayrequirereplacement.• Iftimeandserviceabilitypermits,asuspectunitmaybeverifiedbystabilizingthetemperature

oftheunitat70°F(21°C)foraminimumof4hoursandreadingthepressuregaugeatthatpoint.

IndicatorLightInspection

Beforeoperating,visuallychecktoinsureindicatorlightoralternatedisplayisoperational,andcylinderpressureindicatorisinthenormalrange.

GlassBulb(TemperatureSensor)Inspection

Neverpaintorobstructthecylindermanifoldorsensorvalve/detector,asthiswilladverselyaffectitsoperatingcharacteristic.

Checkforpresenceofglassbulb.Figure8showstwostates:Charged(Intact)andDischarged(Activated).

Figure8

Detectors

DischargedCharged

PN:123-456,RevisionBPage19of28

CableInspection

Manualactivationcablesshouldbecheckedforproperoperationevery6monthswhilecylinderinspectionisbeingperformed.Cablerunsshouldbevisuallycheckedtoensurenodamagehasbeendonetothecable.(Noexcessivewearorpinchingexists).Takesafetypinoutof‘backstop’positioninthereleasebracketandplaceintocenterhole,securingreleasearm.Disengage‘S’-hookfromreleasearm,removepinfromfirereleasehandle,andtestcableforsmoothoperation.Re-assembleinreverseorder(seeFigure6,page14).

AdditionalServicingFurtherservicingofFire-Hawkpre-engineeredsystemsisreservedtocompetentindividualswhohavecompletedtrainingbyFire-Hawkpersonnel.ServiceManual123-350isavailabletotheseindividuals.

SpecificationTableFire-Hawk“NFG”SeriesAutomaticandManual/AutomaticFireSuppressionsystems

C UF T C UM

R ang e R ang e IN mm IN mm IN mmNFG25A NFG25M 17-25 0.48-0.7 0.9 0.4 1.3 0.6 2.9 74 5 127 12.7 323 4.4 112

NFG50A NFG50M 26-50 0.7-1.4 1.4 0.6 2.7 1.2 3.5 89 5 127 18.8 478 4.9 124

NFG75A NFG75M 51-75 1.4-2.1 2.7 1.2 4.0 1.8 3.5 89 5 127 18.8 478 4.9 124

NFG100A NFG100M 76-100 2.1-2.8 4.0 1.8 5.4 2.4 4.3 108 5.2 132 19 483 5.2 132

NFG125A NFG125M 101-125 2.8-3.5 5.4 2.4 6.7 3.0 5.3 133 5.7 145 20.6 523 6.4 163

NFG150A NFG150M 126-150 3.5-4.2 6.7 3.1 8.1 3.7 5.3 133 5.7 145 20.6 523 6.4 163

NFG175A NFG175M 151-175 4.2-5.0 8.1 3.7 9.4 4.3 5.3 133 5.7 145 20.6 523 6.4 163

NFG200A NFG200M 176-200 5.0-5.7 9.4 4.3 10.7 4.9 5.3 133 5.7 145 20.6 523 6.4 163

NFGModelA reaof

Protection

MaximumNovec1230

A g entC ylinderD iameter

InstallationD imens ionR equirements

A uto LB S KG LB S KGManual/A uto

mmW H D

MinimumNovec1230

A g ent

IN

OperatingTemperatureRange: 20°F(-7°C)to130°F(54°C).DischargeTemperatureRange: NFG25throughNFG75:200-250°F(93-121°C) NFG100throughNFG200:175-225°F(79-107°C)

• AllNFGModelsapprovedforverticalorhorizontalmounting.• AllNFGModelsareavailablewithmultipleapprovedcylinders,DOT/TCandCE.• AllNFGModelsarenon-refillable(non-serviceable)• NFGandNFDsystemsaredesignedforonlyonecylinder(singlenozzle)toprotectthe

entirespace.Usingtwocylinderstoachievecombinedcoverageisnotacceptable.

Abbreviations:CUFT=CubicFeet KG=Kilograms IN=InchesCUM=CubicMeters LBS=Pounds MM=Millimeters

PN:123-456,RevisionBPage20of28

SpecificationTableFire-Hawk“NFD”SeriesAutomaticandManual/AutomaticFireSuppressionsystems

DOT3AL/TC3ALMorTPED/ADRCylinders

C ubicF T R ang e

C ubicM R ang e

LB S KG LB S KG IN mm IN mm IN mm IN mm

NFD225 A NFD225 M 201–225 5.7–6.4 10.8 4.9 12.1 5.5 6.9 175 8 203 20.1 511 8 203

NFD250 A NFD250 M 226–250 6.4–7.1 12.1 5.5 13.4 6.1 6.9 175 8 203 20.1 511 8 203

NFD275 A NFD275 M 251–275 7.1–7.8 13.4 6.1 14.8 6.7 6.9 175 8 203 20.1 511 8 203

NFD300 A NFD300 M 276–300 7.8–8.5 14.8 6.7 16.1 7.3 6.9 175 8 203 20.1 511 8 203

NFD325 A NFD325 M 301–325 8.5–9.2 16.1 7.3 17.5 7.9 6.9 175 8 203 24.7 627 8 203

NFD350 A NFD350 M 326–350 9.2–9.9 17.5 7.9 18.8 8.5 6.9 175 8 203 24.7 627 8 203

NFD375 A NFD375 M 351–375 9.9–10.6 18.8 8.5 20.1 9.1 6.9 175 8 203 24.7 627 8 203

NFD400 A NFD400 M 376–400 10.6–11.3 20.2 9.1 21.5 9.7 6.9 175 8 203 24.7 627 8 203

NFD425 A NFD425 M 401–425 11.4–12.0 21.5 9.7 22.8 10.4 6.9 175 8 203 28.7 729 8 203

NFD450 A NFD450 M 426–450 12.1–12.7 22.8 10.4 24.2 11.0 6.9 175 8 203 28.7 729 8 203

NFD475 A NFD475 M 451–475 12.8–13.4 24.2 11.0 25.5 11.6 6.9 175 8 203 28.7 729 8 203

NFD500 A NFD500 M 476–500 13.5–14.2 25.5 11.6 26.9 12.2 6.9 175 8 203 28.7 729 8 203

NFD525 A NFD525 M 501–525 14.2–14.9 26.9 12.2 28.2 12.8 6.9 175 8 203 28.7 729 8 203

NFD550 A NFD550 M 526–550 14.9–15.6 28.2 12.8 29.5 13.4 8 203 9 229 29 737 9.4 239

NFD575 A NFD575 M 551–575 15.6–16.3 29.6 13.4 30.9 14.0 8 203 9 229 29 737 9.4 239

NFD600 A NFD600 M 576–600 16.3–17.0 30.9 14.0 32.2 14.6 8 203 9 229 29 737 9.4 239

NFD625 A NFD625 M 601–625 17.0–17.7 32.2 14.6 33.6 15.2 8 203 9 229 29 737 9.4 239

NFD650 A NFD650 M 626–650 17.7–18.4 33.6 15.2 34.9 15.8 8 203 9 229 29 737 9.4 239

NFD675 A NFD675 M 651–675 18.4–19.1 34.9 15.8 36.3 16.4 8 203 9 229 29 737 9.4 239

NFD700 A NFD700 M 676–700 19.1–19.8 36.3 16.4 37.6 17.1 8 203 9 229 33.8 859 9.4 239

NFD725 A NFD725 M 701–725 19.8–20.5 37.6 17.1 38.9 17.7 8 203 9 229 33.8 859 9.4 239

NFD750 A NFD750 M 726–750 20.6–21.2 38.9 17.7 40.3 18.3 8 203 9 229 33.8 859 9.4 239

NFD775 A NFD775 M 751–775 21.3–21.9 40.3 18.3 41.6 18.9 8 203 9 229 33.8 859 9.4 239

NFD800 A NFD800 M 776–800 22.0–22.6 41.6 18.9 43.0 19.5 8 203 9 229 33.8 859 9.4 239

NFD825 A NFD825 M 801–825 22.7–23.4 43.0 19.5 44.3 20.1 8 203 9 229 33.8 859 9.4 239

H D

A uto Manual/A uto

InstallationD imens ionR equirements

Model A reaofProtection

M inimumNovec1230

A g ent

MaximumNovec1230

A g ent

C ylinderD ia W

(Continuedonnextpage)

OperatingTemperatureRange: NFD225-825:20°F(-7°C)to130°F(54°C)NFD850-1800:32°F(0°C)to130°F(54°C)

DischargeTemperatureRange: NFD225throughNFD1800:175-225°F(79-107°C)

• ModelsNFD225throughNFD825approvedforverticalorhorizontalmounting.• ModelsNFD850throughNFD1800forverticalmountingonly.• AllNFDModelsarerefillable.• NFDModelsareonlyofferedineitherUSDOT/TCorEuropean,CE.(NotBoth)• NFGandNFDsystemsaredesignedforonlyonecylinder(singlenozzle)toprotectthe

entirespace.Usingtwocylinderstoachievecombinedcoverageisnotacceptable.

Abbreviations:CUFT=CubicFeet KG=Kilograms LBS=PoundsCUM=CubicMeters IN=Inches MM=Millimeters

PN:123-456,RevisionBPage21of28

SpecificationTableFire-Hawk“NFD”SeriesManual/AutomaticFireSuppressionsystems

DOT4BW/TC4BWMorTPED/ADRCylinders

C ubic FTR ange

C ubic MR ange

L B S K G LB S K G IN MM IN MM IN MM IN MM

NFD 850 M 826–850 23.4–24.1 44.3 20.1 45.7 20.7 10 254 16.5 419 30.7 780 11.4 290

NFD 875 M 851–875 24.1–24.8 45.7 20.7 47.0 21.3 10 254 16.5 419 30.7 780 11.4 290

NFD 900 M 876–900 24.8–25.5 47.0 21.3 48.3 21.9 10 254 16.5 419 30.7 780 11.4 290

NFD 925 M 901–925 25.5–26.2 48.3 21.9 49.7 22.5 10 254 16.5 419 30.7 780 11.4 290

NFD 950 M 926–950 26.2–26.9 49.7 22.5 51.0 23.1 10 254 16.5 419 30.7 780 11.4 290

NFD 975 M 951–975 26.9–27.6 51.0 23.1 52.4 23.8 10 254 16.5 419 30.7 780 11.4 290

NFD 1000 M 976–1000 27.6–28.3 52.4 23.8 53.7 24.4 10 254 16.5 419 30.7 780 11.4 290

NFD 1025 M 1001–1025 28.3–29.0 53.7 24.4 55.0 25.0 10 254 16.5 419 30.7 780 11.4 290

NFD 1050 M 1026–1050 29.1–29.7 55.1 25.0 56.4 25.6 10 254 16.5 419 30.7 780 11.4 290

NFD 1075 M 1051–1075 29.8–30.4 56.4 25.6 57.7 26.2 10 254 16.5 419 30.7 780 11.4 290

NFD 1100 M 1076–1100 30.5–31.1 57.7 26.2 59.1 26.8 10 254 16.5 419 30.7 780 11.4 290

NFD 1125 M 1101- 1125 31.2–31.9 59.1 26.8 60.4 27.4 10 254 16.5 419 30.7 780 11.4 290

NFD 1150 M 1126–1150 31.9–32.6 60.4 27.4 61.8 28.0 10 254 16.5 419 30.7 780 11.4 290

NFD 1175 M 1151–1175 32.6–33.3 61.8 28.0 63.1 28.6 10 254 16.5 419 30.7 780 11.4 290

NFD 1200 M 1176–1200 33.3–34.0 63.1 28.6 64.4 29.2 10 254 16.5 419 30.7 780 11.4 290

NFD 1225 M 1201–1225 34.0–34.7 64.5 29.2 65.8 29.8 10 254 16.5 419 30.7 780 11.4 290

NFD 1250 M 1226–1250 34.7–35.4 65.8 29.8 67.1 30.4 10 254 16.5 419 30.7 780 11.4 290

NFD 1275 M 1251–1275 35.4–36.1 67.1 30.5 68.5 31.1 10 254 16.5 419 39.9 1013 11.4 290

NFD 1300 M 1276–1300 36.1–36.8 68.5 31.1 69.8 31.7 10 254 16.5 419 39.9 1013 11.4 290

NFD 1325 M 1301–1325 36.8–37.5 69.8 31.7 71.2 32.3 10 254 16.5 419 39.9 1013 11.4 290

NFD 1350 M 1326–1350 37.5–38.2 71.2 32.3 72.5 32.9 10 254 16.5 419 39.9 1013 11.4 290

NFD 1375 M 1351–1375 38.3–38.9 72.5 32.9 73.8 33.5 10 254 16.5 419 39.9 1013 11.4 290

NFD 1400 M 1376–1400 39.0–39.6 73.9 33.5 75.2 34.1 10 254 16.5 419 39.9 1013 11.4 290

NFD 1425 M 1401–1425 39.7–40.3 75.2 34.1 76.5 34.7 10 254 16.5 419 39.9 1013 11.4 290

NFD 1450 M 1426–1450 40.4–41.1 76.5 34.7 77.9 35.3 10 254 16.5 419 39.9 1013 11.4 290

NFD 1475 M 1451–1475 41.1–41.8 77.9 35.3 79.2 35.9 10 254 16.5 419 39.9 1013 11.4 290

NFD 1500 M 1476–1500 42.0–42.5 79.2 35.9 80.6 36.5 10 254 16.5 419 39.9 1013 11.4 290

NFD 1525 M 1501–1525 42.5–43.2 80.6 36.5 81.9 37.1 10 254 16.5 419 39.9 1013 11.4 290

NFD 1550 M 1526–1550 43.2–43.9 81.9 37.2 83.2 37.8 10 254 16.5 419 39.9 1013 11.4 290

NFD 1575 M 1551–1575 43.9–44.6 83.2 37.8 84.6 38.4 10 254 16.5 419 39.9 1013 11.4 290

NFD 1600 M 1576–1600 44.6–45.3 84.6 38.4 85.9 39.0 10 254 16.5 419 39.9 1013 11.4 290

NFD 1625 M 1601–1625 45.3–46.0 85.9 39.0 87.3 39.6 10 254 16.5 419 39.9 1013 11.4 290

NFD 1650 M 1626–1650 46.0–46.7 87.3 39.6 88.6 40.2 10 254 16.5 419 39.9 1013 11.4 290

NFD 1675 M 1651–1675 46.7–47.4 88.6 40.2 89.9 40.8 10 254 16.5 419 39.9 1013 11.4 290

NFD 1700 M 1676–1700 47.5–48.1 90.0 40.8 91.3 41.4 10 254 16.5 419 39.9 1013 11.4 290

NFD 1725 M 1701–1725 48.2–48.8 91.3 41.4 92.6 42.0 10 254 16.5 419 39.9 1013 11.4 290

NFD 1750 M 1726–1750 48.9–49.6 92.6 42.0 94.0 42.6 10 254 16.5 419 39.9 1013 11.4 290

NFD 1775 M 1751–1775 49.6–50.3 94.0 42.6 95.3 43.2 10 254 16.5 419 39.9 1013 11.4 290

NFD 1800 M 1776–1800 50.3–51.0 95.3 43.2 96.7 43.8 10 254 16.5 419 39.9 1013 11.4 290

D

Manual/Auto

Installat ionDimensionR equirements

Model A reaof P rotec t ion

MinimumNovec 1230Agent

Max imumNovec 1230Agent

C y linderDia W H

PN:123-456,RevisionBPage22of28

Three(3)Year“NFG”and“NFD”SeriesLimitedWarrantyWewarranttotheoriginalretailpurchaser,theNFDandNFGsuppressionsystemsforaperiodofthree(3)yearsafterretailpurchaseagainstdefectivematerialandfaultyworkmanship.Anysystemfoundtobedefectiveduringthewarrantyperiodwillrepairedifpossible,orreplacedfreeofchargeifclassifiedasnon-refillable(accordingtotheproductlabel)upontheprepaidreturnofthedefectivesystemtoFire-Hawkfacilityorauthorizedserviceparty.Proofofpurchaserequired,otherwisedateofmanufactureroncylinderspecificationlabelwillapply.Thiswarrantygivesyouspecificlegalrightswhichmayvarybystateorcountry.Theforegoingwarrantyismadeinlieuofallotherwarrantieswithrespecttothesystemincludinganyimpliedwarrantyofmerchantabilityorfitnessforaparticularpurpose.Nopersonisauthorizedtogiveanyotherwarranty,orassumeforFire-Hawkanyotherliabilityinconnectionwiththesaleorinstallationofitsproducts.Replacementofthesystemwillbethesoleremedywithrespecttoanylossordamagetoproperty.Buyerisnotrelyingonseller’sjudgmentregardingbuyer’sparticularrequirementsandbuyerhashadanopportunitytoinspecttheproducttobuyer’ssatisfaction.

Conditions

AllFire-Hawkproductsareleaktestedaftermanufactureandshippedinperfectworkingorder.Damagenoteduponreceiptofshipmentshouldbeaddressedasashippingclaim,thefilingofwhichisthesoleresponsibilityoftheconsigneeforwhichthetotalcompensatoryawardwillbelimitedtothatappropriatedbythecarrier.Insuredfreightcostsaretheresponsibilityoftheconsignee.Missingcomponentpartsanddamagenoteduponinstallationaretypicallytheresultofmishandlingduringtheinstallationprocessandwillnotqualifyforwarrantycoverage.Incidentsofaccidentaldischargearenotindicativeofproductfailure–heedproductwarningstoavoidinjuryand/orassociatedcosts.Noreturnswillbeprocessedwithoutproperreturnauthorization.

OutofWarrantyReplacements/Recharges

Fire-Hawk“NFG”ModelSeriescylinderscomplywithUSDOTSpecification39andPED.Thesecylindersarenotrefillable.ThedischargedcylinderwillbereplacedwithacomparableFire-Hawkcylinderuponprepaidreturnofthedischargedsystemforone-halfofthecurrentsuggestedlistprice.Fire-Hawk“NFD”ModelSeriescylinderscomplywithDOT/TCorEuropeanSpecifications(TPED/ADR),asdetailedinthecylinderinspection/cylindertestingsection,whichallowdischargedcylinderstoberefilledandserviced.Thedischargedcylindermayberefilledupontheprepaidreturnofthedischargedsystem.Contactfactoryoranauthorizeddealerfordetails.Returnto: Fire-Hawk–USA ADivisionofGlobalTecSolutionsLLC

Baltimore,Maryland Website:www.fire-hawksafety.com

PN:123-456,RevisionBPage23of28

Novecfilled - Engineered,Pre-engineered,PortablesandRaceSystems MATERIALSAFETYDATASHEET

FireSuppressionSystem

MSDSNo.123-241Rev.-ReviewDate:05/10/10

Section1–CompanyandChemicalIdentification

Fire-Hawk EmergencyPhone:1-800-535-5053(InfoTrac) InternationalPhone:352-323-3500

9331-APhiladelphiaRoad Phone:1-800-445-7680Baltimore,Maryland21237 IssueDate:August30,2009www.fire-hawksafety.com ProductName:FireExtinguisher/SystemProductName:3M(TM)Novec(TM)1230FireProtectionFluid[FK-5-1-12]

Section2:Ingredients

C.A.S. IngredientName OSHAPEL ACGIHTLV OSHA

STEL%

756-13-8 1,1,1,2,2,4,5,5,5-NONAFLUORO-4-(Trifluoromethyl)-3-Pentanone

N/A N/A N/A >99

7727-37-9

Nitrogen,Compressed None SimpleAsphyxiant

N/A 1

ThereareNOsubstancespresentingahealthorenvironmentalhazardwithinthemeaningofDirective67/548/EEC,inconcentrationsequaltoorgreaterthanthoselaiddowninthetablesetoutinArticle3(3)ofDirective1999/45/EC,norwithlowerlimitsgiveninAnnexItoDirective67/548/EECorinAnnexesII,IIIorVtoDirective1999/45/EC.ThereareNOsubstancesforwhichthereareCommunityworkplaceexposurelimits,whicharenotalreadyincludedinabove.NOTE:Unlessacomponentpresentsaseverehazard,itdoesnotneedtobeconsideredintheMSDSiftheconcentrationislessthan1%.[AccordingtoDirective1999/45/EC.]

Section3:HazardsIdentification

3.1EmergencyOverviewOdor,Color,Grade:Clearcolorless,lowodorgas.3.2PotentialHealthEffects(AcuteExposure):EyeContactContactwiththeeyesduringproductuseisnotexpectedtoresultinsignificantirritation.SkinContact:Contactwiththeskinduringproductuseisnotexpectedtoresultinsignificantirritation.Inhalation:Prolongedorrepeatedexposure,aboverecommendedguidelines,maybeabsorbedfollowinginhalationandcausetargetorganeffects.Ingestion:Nohealtheffectsareexpected.ChronicExposure:FORHUMANS:EUClassification:ThisproductisnotclassifiedasdangerousaccordingtoDirective1999/45/EC.LimitValuesforExposure:1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)-3-pentanone.TWALimit:150ppm.Limitsetby3MCompany.NeitherthispreparationnorthesubstancescontainedinithavebeenlistedascarcinogenicbyNationalToxicologyProgram,I.A.R.C.,orOSHA.ASPARTOFGOODINDUSTRIALANDPERSONALHYGIENEANDSAFETYPROCEDURE,avoidallunnecessaryexposuretothechemicalsubstanceandensurepromptremovalfromskin,eyes,andclothing.DONOTeat,drinkorsmokewhenusingthisproduct.

PN:123-456,RevisionBPage24of28

Prolongedorrepeatedexposure,aboverecommendedguidelines,maycauselivereffects.Signs/symptomsmayincludelossofappetite,weightloss,fatigue,weakness,abdominaltendernessandjaundice.MEDICALCONDITIONSGENERALLYAGGRAVATEDBYEXPOSURE:Noneknown.FORENVIRONMENT:Noharmtotheenvironmentisexpectedfromanaccidentalreleaseofthispreparation.SeeSection12,ECOLOGICALINFORMATION.

Section4:FirstAidMeasures

4.1FirstAidProceduresThefollowingfirstaidrecommendationsarebasedonanassumptionthatappropriatepersonalandindustrialhygienepracticesarefollowed.EyeContact:Flusheyeswithlargeamountsofwater.Ifsigns/symptomspersist,getmedicalattention.SkinContact:Washaffectedareawithsoapandwater.Ifsigns/symptomsdevelop,getmedicalattention.Inhalation:Ifsigns/symptomsdevelop,removepersontofreshair.Ifsigns/symptomspersist,getmedicalattention.IfSwallowed:Donotinducevomiting.Givevictimtwoglassesofwater.Nevergiveanythingbymouthtoanunconsciousperson.Ifsigns/symptomsdevelop,getmedicalattention.

Section5:FireFightingMeasures

5.1FlammablePropertiesAutoignitiontemperature:NotApplicable. FlammableLimits-LEL[Details:Nonflammable].FlashPoint:NotApplicable FlammableLimits-UEL[Details:Nonflammable].5.2ExtinguishingMediaProductisafire-extinguishingagent.5.3PROTECTIONOFFIREFIGHTERSSpecialFireFightingProcedures:Wearfullprotectiveequipment(BunkerGear)andaself-containedbreathingapparatus(SCBA).UnusualFireandExplosionHazards:Notapplicable.Note:SeeSTABILITYANDREACTIVITY(SECTION10)forhazardouscombustionandthermaldecompositioninformation.

Section6:AccidentalReleaseMeasures

Forpersonalprotection:Preventskinandeyecontact,seeSection8EXPOSURECONTROLS/PERSONALPROTECTION.Cleanup:Ventilatetheareawithfreshair.Containspill.Forlargerspills,coverdrainsandbuilddikestoprevententryintosewersystemsorbodiesofwater.Workingfromaroundtheedgesofthespillinward,coverwithbentonite,vermiculite,orcommerciallyavailableinorganicabsorbentmaterial.Mixinsufficientabsorbentuntilitappearsdry.Collectasmuchofthespilledmaterialaspossible.Cleanupresidue.Placeinametalcontainerapprovedfortransportationbyappropriateauthorities.Sealthecontainer.Disposeofcollectedmaterialassoonaspossible.SeeSection13,DISPOSALCONSIDERATIONS.NOharmtotheenvironmentisexpectedfromanaccidentalreleaseofthispreparation.SeeSection12,ECOLOGICALINFORMATION.Intheeventofareleaseofthismaterial,theusershoulddetermineifthereleasequalifiesasreportableaccordingtolocal,state,andfederalregulations.

PN:123-456,RevisionBPage25of28

Section7:HandlingandStorage

7.1HandlingContentsunderpressure.Avoidbreathingofvapors,mistsorspray.Avoideyecontactwithvapors,mists,orspray.Handle,transportandstorecarefullyandsecurelytoavoidaccidentalknockingoverorotherseverephysicalimpacts.Donotexposetodirectheatsources.SeeincompatibilityinformationinSection10,STABILITYANDREACTIVITY.7.2StorageKeepcontainerinwell-ventilatedarea.Donotstoreintemperatureabove130ºF(54ºC).SeeincompatibilityinformationinSection10,STABILITYANDREACTIVITY.Thereisminimaldangertotheenvironmentfromastoragerelease.SeeSection12,ECOLOGICALINFORMATION.7.3.SpecificuseTheintendedorrecommendeduseofthispreparationisasaFIREEXTINGUISHINGAGENT/SYSTEM.

Section8:ExposureControls/PersonalProtection

8.1PersonalProtectiveEquipment(PPE)Properhandlingshouldnotincurexposuretoagent.Asaprecautionforaccidentaldischargeorleakage,thefollowingshouldbefollowed:8.1.1Eye/FaceProtectionAvoideyecontact.Thefollowingeyeprotection(s)arerecommended:IndirectVentedGoggles.8.1.2SkinProtectionAvoidprolongedorrepeatedskincontact.Selectanduseglovesand/orprotectiveclothingtopreventskincontactbasedontheresultsofanexposureassessment.Consultwithyourgloveand/orprotectiveclothingmanufacturerforselectionofappropriatecompatiblematerials.Glovesmadefromthefollowingmaterial(s)arerecommended:ButylRubber.8.1.3RespiratoryProtectionAvoidbreathingofvapors,mistsorspray.Undernormaluseconditions,airborneexposuresarenotexpectedtobesignificantenoughtorequirerespiratoryprotection.SelectoneofthefollowingNIOSHapprovedrespiratorsbasedonairborneconcentrationofcontaminantsandinaccordancewithOSHAregulations:Halffacepieceorfullfaceair-purifyingrespiratorwithorganicvaporcartridges.Consultthecurrent3MRespiratorySelectionGuideforadditionalinformationorcall1-800-243-4630for3Mtechnicalassistance.Ifthermaldecompositionoccurs,wearsuppliedairrespiratoryprotection.8.1.4PreventionofSwallowingDonoteat,drinkorsmokewhenusingthisproduct.Washexposedareasthoroughlywithsoapandwater.8.1.5HandprotectionButylRubberglovesarerecommended.Selectanduseglovesand/orprotectiveclothingtopreventskincontactbasedontheresultsofanexposureassessment.Consultwithyourgloveand/orprotectiveclothingmanufacturerforselectionofappropriatecompatiblematerials.8.2ExposureLimitValues1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)-3-pentanoneTWALimit:150ppm.Limitsetby3MCompany.8.3Environmentalexposurecontrols Thereisminimaldangertotheenvironmentfromastoragerelease.SeeSection12,ECOLOGICALINFORMATION.

Section9:PhysicalAndChemicalProperties

SpecificPhysicalForm:Liquidandgasmixture SpecificGravity:1.6[RefStd:WATER=1]Odor,Color,Grade:Clearcolorless,lowodor. Meltingpoint-108ºCGeneralPhysicalForm:Liquidandgas SolubilityinWater:Nil

PN:123-456,RevisionBPage26of28

Autoignitiontemperature:NotApplicable Evaporationrate:>1[RefStd:BUOAC=1]FlashPoint:NotApplicable VolatileOrganicCompounds:NoDataAvailableFlammableLimits-LEL[Details:Nonflammable] Percentvolatile:100%FlammableLimits-UEL[Details:Nonflammable] VOCLessH2O&ExemptSolvents:NoDataAvailableBoilingpoint:49ºC(120.6ºF) Viscosity:0.6centipoise[@25ºC]VaporDensity:11.6[RefStd:AIR=1] VaporPressure:244mmHg[@20ºC]pH:NotApplicable

Section10:StabilityandReactivity

Stability:Stableundernormalconditionsofhandlinganduse.MaterialsandConditionstoAvoid:Strongbases;Amines;Alcohols:Avoiddirectsunlightandultravioletlightforextendedperiods.Donotstoreabove130ºF (54ºC)takingintoaccounteffectsofsunlight.HazardousPolymerization:Hazardouspolymerizationwillnotoccur.HazardousDecompositionorBy-Products:Combustionordecompositionproductsincludecarbonmonoxide,carbondioxide,andhydrogenfluoride.

Section11:ToxicologicalInformation

Product:ToxicityData:InhalationLC50(rat)>10%v/v.NOAELforcardiacsensitization>10%v/v.

Section12:EcologicalInformation

12.1.Ecotoxicity:Notdetermined.12.2.Mobility:Productishighlyinsolubleinwaterandvolatile.12.3.Persistenceanddegradability:Photolytichalf-lifeis3to5days.Thepersistentphotolyticdegradationproductistrifluoroaceticacid.12.4.Bioaccumulativepotential:Notdetermined.12.5.Otheradverseeffects:Ozonedepletionpotential:None.Photochemicalozonecreationpotential:None.Globalwarmingpotential:1.

Section13:DisposalConsiderations

WasteDisposalMethod:Reclaimiffeasible.Forinformationonproductreturn,contactFire-Hawk.Incinerateinanindustrialorcommercialfacilityinthepresenceofacombustiblematerial.CombustionproductswillincludeHF.Facilitymustbecapableofhandlinghalogenatedmaterials.Asadisposalalternative,disposeofwasteproductinafacilitypermittedtoacceptchemicalwaste.EPAHazardousWasteNumber(RCRA):Notregulated.Sinceregulationsvary,consultapplicablelocalregulationsorauthoritiesbeforedisposal.

Section14:TransportInformation

HazardClassorDivision:2.2.Label:Nonflammablegas.ProperShippingName:CompressedGas,n.o.s,(nitrogenandfluorinatedketonemixture)IDNumber:UN1956PackingGroup:N/APackingInstructions:200Foradditionaltransportinformation,contactFire-Hawk.Noharmtotheenvironmentisexpectedfromthispreparation.SeeSection12,ECOLOGICALINFORMATION.

PN:123-456,RevisionBPage27of28

Section15:RegulatoryInformation

EUClassification:ThisproductisnotclassifiedasdangerousaccordingtoDirective1999/45/EC.ExposureLimitValues:1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)-3-pentanone.TWALimit:150ppm.Limitsetby3MCompany.EINECSStatus:ThecomponentofthisproducthasbeennotifiedtoELINCS(EuropeanListofNotifiedorNewChemicalSubstances).Certainrestrictionsapply.Contactyourdistributorforadditionalinformation.EPATSCAStatus:AllcomponentsareincludedinTSCAinventoriesorareexemptfromlisting.CanadianDSL(DomesticSubstancesList):AllcomponentsareincludedintheDSLorareexemptfromlisting.TheproductalsocomplieswiththechemicalnotificationrequirementsforKorea(KECI),Australia(AICS),Japan(METI),andChina(CICS).Environmentalrestrictions:Noneareknown.RestrictionsonMarketingandUse:Noneareknown.Refertoanyothernationalmeasuresthatmayberelevant.

Section16:OtherInformation

Formatisfromdirective2001/58/EC.ThereisnodatainEINECShttp://exb.jrc.it/existing-chemicals/.Datausedtocompilethedatasheetisfrom3MMaterialSafetyDataSheet,Jan.21,2004andotherproductliterature.TheEUClassificationisinaccordancewithDirective1999/45/EC.(WHMIS)CANADIANWORKPLACEHAZARDOUSMATERIALIDENTIFICATIONSYSTEMRATINGS:Thisproductisrated:NotHazardous.(HMIS)HAZARDOUSMATERIALIDENTIFICATIONSYSTEMRATINGS:HEALTH:0 4.SevereHazard___1.SlightHazardFLAMMABILITY:0 3.SeriousHazard___0.MinimalHazardREACTIVITY:1 2.ModerateHazard___PROTECTION:SeeSection8.EXPOSURECONTROLS/PERSONALPROTECTION.

Section17:DisclaimerofExpressedandImpliedWarranties

Metalcraft/Fire-Hawk,Inc.hastakenreasonablecareinpreparingthisdocument,however,sincetheuseofthisinformationandtheconditionsofuseoftheproductarenotwithinthecontrolofMetalcraft/Fire-Hawk,Inc.,itistheuser’sobligationtodeterminetheconditionsofsafeuseofthisproduct.Theinformationinthisdocumentisofferedwithnowarrantiesorrepresentationsastoaccuracyorcompletenessanditistheresponsibilityofeachindividualtodeterminethesuitabilityoftheinformationfortheirparticularpurpose(s).

PN:123-456,RevisionBPage28of28

Fire-Hawk-USA

Baltimore,Maryland(410)202-2347

www.fire-hawksafety.com