abstracts of papers · 2012. 10. 21. · 90thannualprofessionalprogramlisting...
Post on 21-Jan-2021
0 Views
Preview:
TRANSCRIPT
ABSTRACTS OF PAPERS
From the AWS Professional Programand Poster Session
A part of the 2009
FABTECH International & AWS Welding ShowNovember 15-18, 2009
Chicago, Illinois
AmericanWelding Society
American Welding Society550 N. W. LeJeune Road
Miami, Florida 33126
90th Annual Professional Program Listing
Monday, November 16,20098:30 AM-11:00 AM
Room: N138
Chair: Stephen Liu, Colorado School of Mines, Golden, CO
SESSION 1: International Trends in Welding Research
A. 8:30am
Status and Trends ofWelding Technologyand industry in China
by Ping Shan, President, Chinese Welding Society and Tianjin University
B. 9:15am
Status and Trends of Welding Technology and Industry in Taiwan
by Jong-Ning Aoh, Taiwan Welding Association and National Chun Cheng
C. 10:00am
Welding Research in Canada
by Patricio Mendez, N. Zhou, A. Gerlich and M. Yarmuch, University of Alberta
Monday, November 16,20091:30 PM - 5:00 PM
Room: N138
Chair: Sindo Kou, University of Wisconsin, Madison, Wl
SESSION 2: Friction Stir Welding
A. 1:30pmEffect ofJoint Design on Strength of DissimilarMg-to-AI Friction-Stir Welds 13
by Vahid Firouzdor and Sindo Kou, University ofWisconsin, Madison, Wl
B. 2:00pm - CANCELLED
Friction Stir Spot Welding and its Application forMagnesiumAbstract not available at the time ofpublicationby Blair E. Carlson, Cameron Dasch, Robert Szymanski and Mark T. Hall, General Motors R&D, Warren, Ml
C. 2:30pmMaterial Flow and Deformation Mechanisms During Friction Stir Weldingby Adrian Gerlech, University of Alberta, Edmonton, Canada
15
D. 3:00pmSynthesis of experimentaland Simulation FSWresults using scaling techniques,by Karem Tello, Colorado School of Mines, Golden, CO
Patricio Mendez, University of Alberta, Edmonton, Canada
17
E. 3:30pmFerrous Alloy Friction Stir Welding and Microstructure Simulation
by David M. Failla II and John Lippold, The Ohio State University, Columbus, OH
27
F. 4:00pmComparison ofJoining Thin Sheet TRIP 780 to CRIF Steels Using FSW and GTAWProcesses
by Scott Gordon, Stephen Liu, Colorado School of Mines, Golden, CO
29
Monday, November 16,20091:30 PM-5:00 PM
Room: N139
Chair: John DuPont, Lehigh University, Bethlehem, PA
SESSION 3: Welding Metallurgy
A. 1:30pm
Optimizing Corrosion Performance of Welds 33
by Andrew Stockdale and John DuPont, Lehigh University, Bethlehem, PA
B. 2:00pm
Loading, Heat Treatmentand Welding Parameters Influence on Wear Resistance 35
by Estela S. Surian, Agustin Gualco, Hernan Gabriel Svoboda and Luis Alberto de Vedia, UNLZ and Regional FacultySan Nicolas-UTN, Buenos Aires, Argentina
C. 2:30pm
Development of a Chromium-Free Ni-Base Consumable for Joining Stainless Steel 39
by Jeffrey Sowards, Boian T. Alexandrov, Dong Liang, Gerald S. Frankel and John Lippold. The Ohio State University,
Columbus, OH
D. 3:00pmGas Tungsten Arc Welding of Titanium: Complex Fluoride-Containing Flux Pastes and Flux-Cored Wires 47
by Christine Hillier, Michael Liu and Stephen Liu, Colorado School of Mines, Golden, CO
E. 3:30pmIn-situ Thermite Welding ofBoiler Tubing 51
by John Nickell and Stephen Liu, Colorado School of Mines, Golden, COKent Coleman, Electric Power Research Institute
F. 4:00pmMagnetic Stirring ofHigh Chromium Nickel Based Weld Metals 57
by Steve McCracken, Electric Power Research Institute, Charlotte, NCSuresh Babu, Dave Farson, Yong Chae Lin and xinghua Yu, The Ohio State University, Columbus, OH
G. 4:30pmMicrostructure Control in HSLA Steel Welds 59
by Boian T. Alexandrov and John C. Lippold, The Ohio State University, Columbus, OH
Monday, November 16,20091:30 PM - 5:00 PM
Room: N136
Chair: Patrick Hochanadel, Los Alamos National Laboratory, Los Alamos, NM
SESSION 4: High Energy Density Beam Processes
A. 1:30pmLaser Hybrid Welding/Brazing ofAl to Ti Alloys with Filler Wire
by Liqun Li and Norman Zhou, University of Waterloo, Waterloo, CanadaShuhai Chen and YanBin Chen, Harbin Institute of Technology, Harbin, China
B. 2:00pmLaser Welding of open Root Thin Foil Materials forProducing Lattice Structures
by Andrew Deceuster, Chunbo Zhang and Leijun Li, Utah State University, Logan, UT
C. 2:30pmEnergy Transferin Laser Spot Welding - Effect of Joint Geometry.
by Charles V. Robino, Jerome T. Norris and Gerald A, Knorovsky, Sandia National Laboratories, Albuquerque, NM
D. 3:00pmThe Use ofFiller Metal Shims to Improve Electron Beam Weldabilityby John Rugh, and Gary LaFlamme, PTR-Precision Technologies, Inc., Enfield, CT
Daniel Nowak, GE Energy, Greenville, SC
E. 3:30pmFiberLaser Beam Oscillation Techniques for Spiking Suppressionby Dave Farson, Matt Reiter and Junho Cho, The Ohio State University, Columbus, OH
F. 4:00pmComparison of high Deposition Rate Laser Cladding with Yb Fiberand Direct Diode Lasers
by Todd A. Palmer and Kenneth Meinert, Pennsylvania State University, State College, PA
Keith Parker, Direct Diode Systems, Coherent, Inc., Stephenville, TX
G. 4:30pmBead Geometry Control for Repair of Directionally Solidified Nickel-Based Superalloy
by Andrew Deceuster, Chunbo Zhang and Leijun Li, Utah State University, Logan, UT
Tuesday, November 17,20098:00 AM-12:00 PM
Room: N138
Chair: YuMing Zhang, University of Kentucky, Lexington, KY
SESSION 5: Arc Processes
A. 8:00am
New Advancements in AC GMAWfor Steel Construction 85
by Matthew Brooks, OTC Daihen, Inc., Atlanta, GA
Ken Takahashi, OTC Daihen Inc., Tipp City, OHHideo Shiozaki, Tetsuo Era and Tomoyuki Ueyama, OTC Daihen, Inc., Kobe, Japan
6.8:30am
A Compact, Low Cost, In-Process Welding Defects Detection System Based on Thermal Plasma Emission 87
by Pengcheng Lv, and Binglin Miao, AlphaSense, Inc., Newark, DE
Seun Hwan Lee and Jyoti Mazumder, University of Michigan, Newark, DE
Matthew Sinfield, Naval Surface Warfare Center, West Bethesda, MD
C. 9:00am
Laser Enhanced GMAW Metal Transfer. 89
by Yi Huang and YuMing Zhang, University of Kentucky, Lexington, KY
D. 9:30am
Reflection ofIllumination Laser from Gas MetalArc Weld Pool Surface,
91
by Xiaoji Ma and YuMing Zhang, University of Kentucky, Lexington, KY
E. 10:00am
Droplet Heat Content in Various TransferModes in Gas Metal Arc Welding 93
by Erik James Soderstrom, Colorado School of Mines, Golden, CO
Kevin Michael Scott and Patricio F. Mendez, University ofAlberta, Edmonton, Canada
F. 10:30am
Compositional Variation ofIndividual Fume Particles by STEM-EDS 95
by Neil T. Jenkins, The Ohio State University, Columbus, OHThomas W. Eager, Massachusetts Institute of Technology, Cambridge, MA
G. 11:0Oam
Influence of Behavioral Parameters on Duplex Weldments 97
by Carolian Payares-Asprino, and Homan Galezo, Universidad Simon Bolivar, Caracas, Venezuela
John P. Steele, Colorado School of Mines, Golden, CO
Tuesday, November 17,20098:00 AM -12:00 PMRoom: N139
Chain Michael Santella, Oak Ridge National Labs, Oak Ridge, TN
SESSION 6: Industrail Technology
A. 8:00am
Construction and Weld Overlay of Pipelines for the Petrochemical Industry 105by Borja Saiz Sanchez and Roberto Saiz Juarez, Nuevas Tecnologias de Soldadura SI. (NEWTESOL), Cajano, Spain
B. 8:30am
Evaluation ofArc Burning Behavior and Process-Integrated QualityAssurance in Pulse GMA Welding Al-Mg Alloys.. 117by S. Rajasekaran, Vinayaka Missions University, Ariyanur, India
C. 9:00am
Thermal Sprayed Aluminum Against Corrosion Under Insulation 119by Fred van Rodijnen, Sulzer Metco OSU GmbH, Duisburg, Germany
0.9:30am-CANCELLED
Reducing the Noise Generated When Air-Arc Gouging Can Be As Simple As Flipping A SwitchAbstract not available at the time ofpublicationby George Durkt, Jr., U.S. Dept. of Labor - Mine Safety & Health Administration, Pittsburgh, PA
E. 10:00am
DeltaSpot- Reel time resistance welding.by Stefan Mayr, Fronius, USA, Brighton, Mi
. 125
Tuesday, November 17,20098:00 AM-12:00 PMRoom: N136
Chair: Dave Farson, The Ohio State University, Columbus, OH
SESSION 7: Welding Modeling
A. 8:00amA Distortion Prediction Tool for Weld Sequence Optimizationby Yu-Ping Yang, Edison Welding Institute, Columbus, OH
Bradrinarayan P. Athreya, Caterpillar, Mossville, IL
129
B. 8:30am
Preventing Dissimilar Metal Weld Failures: Application ofNew Functionally Graded Transition Joints 131
by Gregory Brentrup, Brett Leister, John DuPont, Lehigh University, Bethlehem, PA
C. 9:00am
Analytical Three-Dimensional Temperature Fieldin Keyhole Welding 137Presented by Chon L. Tsai, Affiliated with The Ohio State University, Columbus, OHby C.C. Chiang and P.S. Wei, National Sun Yat-Sen University, Kaohsiung, China
D. 9:30am
Experimental andSimulation Study ofLaser-Stimulated Electrical Discharges in Nanoscale GapsAbstract not available at the time ofpublicationby Jian Chen and Dave Farson, The Ohio State University, Columbus, OH
E. 10:00am
Bilinear Model Predictive Control of Plasma Pipe Welding ProcessAbstract not available at the time ofpublicationby Kun Qian and YuMing Zhang, Universityof Kentucky, Lexington, KY
F. 10:30am
Maximum Post-Weld Heat Treating Temperatures for Ml Cr-Mo Steels 141
by Michael Santella, Oak Ridge National Laboratory, Oak Ridge, TN
G. 11:00am
Weld Profile Prediction of GMAWofDuplex Stainless Steel
Abstract not available at the time ofpublicationby John P.H. Steele, Colorado School of Mines, Golden, COCarolina Payares-Asprino, Universidad Simon Bolivar, Caracas, Venezuela
Tuesday, November 17, 2009
2:00 PM - 5:00 PM
Room: N138
Chair: Gerald A. Knorovsky, Sandia National Laboratories, Albuquerque, NM
SESSION 8: Properties/Design
A. 2:00pmFCMAW Welding of Stainless Steels for 4.2 K Service 143
by Edward N. Dalder, Dalder Materials Consulting, Inc., Alameda, CA
B. 2:30pmInfluence ofMaterial Properties and Weld Geometry on Fatigue Performance ofDP780and Mild Steei
GMAW Lap Joints 145
by David Anderson,, American Iron and Steel Institute, Southfield, Ml
Yan (Jack) Sang, Justin Hunt and Chonghua (Cindy) Jiang, AET Integration, Inc., Wixom, Ml
C. 3:00pm
Welding Specifications: What Makes for a Good One? 147
by Gerald A. Knorovsky, Sandia National Laboratories, Albuquerque, NM
0.3:30pmEffect of submerged arc welding parameters on Weld Microstructure and Mechanical Properties ofAISI 304 Welded
Joints for Cryogenic Applications 149
by Rafael Eiji Toma, Promon Tecnolgia, Sao Paulo, Brazil
Antonio Cordeiro Souza and Zorailde Morais, Lincoln Electric de Brazil, Guarulhos, Brazil
Sergio Duarte Brandi, University of Sao Paulo, Sao Paulo, Brazil
E. 4:00pmImpact Reliability ofHybrid LaserArc (HLA) Welds on Mild Steels and High Strength Steels 151
by Caleb Roepke and Stephen Liu, Colorado School of Mines, Golden, CO
F. 4:30pmEffect of Welding Parameters on Duplex Stainless Steel Performance 153
by Matthew Yarmuch, Alberta Research Council, Edmonton, Canada
Kimberley Sandy, Master Flo Valve, Inc., Edmonton, Canada
Galen Wright, G. Wright's Welding Ltd., Edmonton, Canada
G. 5:00pmDifferences in Hardness Testing Techniques for Characterizing Wellhead Cladding 157
by Joshua Sleigh, Martin Hukle and Brian Newbury, ExxonMobil Development Co., Houston, TX
Tuesday, November 17,20092:00 PM - 5:30 PM
Room: N139
Chair: Suresh Babu, The Ohio State University, Columbus, OH
SESSION 9: Solid-State Processess
A. 2:00pmAn Explosion In The Uses ofExplosion Welding 159
by Michael Blakely, Dynamic Materials, Sugarland, TX
B. 2:30pm
Explosive BondInterface Characterization 161
by Stephen Liu, Vilem Petr, Collin Trickel, Brandon Dugan, Scott Gordon, Dan Andrews and Chris Paul,Colorado School of Mines, Golden, CO
C. 3:00pmDiffusion-Welded Superconducting Joints ofBi-2223 /Ag Multlfilamentary Tapes 165
by Gui Sheng Zou, and Norman Zhou, University of Waterloo, Waterloo, CanadaWei Guo, Zhou Fang Big and Ai Ping Wu, Tsinghua University, Beijing, China
D. 3:30pmInterfacial Microstructure Characterization in Magnetic Pulse Welds.—, 167
by Yuan Zhang, Suresh Babu and Glen Daehn, The Ohio State University, Columbus, OH
E. 4:00pmTransient Thermal Response in Ultrasonic Additive Manufacturing 169
by David Schick and Suresh Babu, The Ohio State University, Columbus, OHMatt Short, Edison Welding Instiute, Columbus, OH
F. 4:30pmVery High Power UltrasonicAdditive Manufacturing 173
by Siriraman Melatheru Ramanujam, Suresh Babu, The Ohio State University, Columbus, OHMatt Short and Karll Graff, Edison Welding Institute, Columbus, OH
G. 5:00pmHigh-Resolution Transmission Electron Microscopy ofInterfaces in UAM bonds
Abstract not available at the time ofpublicationby Ryan Dehoff, David Schick, Ryan Hahnien and Suresh Babu, The Ohio State University, Columbus, OH
Tuesday, November 17,20092:00 PM - 5:00 PM
Room: N136
Chair: Murali Tumuluru, U.S. Steel, Munhall, PA
SESSION 10: Automotive
A. 2:00pmFailure Mode and heatAffected Zone Microstructure ofAHSS 185
by Victor H. Baltazar Hernandez, Yasuaki Okita and Y. Zhou, University of Waterloo/Centre for Advanced Materials Joining,Waterloo, Canada
B. 2:30pmEffects of Surface Conditions On Resistance Spot Welding of Mg-Alloy AZ31 189
by Lei Liu, Jicai Feng, Yanhong Tian and Norman Zhou, Centre for Advanced Materials Joining, University of Waterloo,Canada & Harbin Institute of Technology, Waterloo, Canada
C. 3:00pmCorrosion and Corrosion-Fatigue ofAZZI Magnesium Weldments 191
by Carl E. Cross and Ping Xu, BAM, Berlin, GermanySuzanne Bender, Otto-von-Guericke University, Magdeburg, Germany
D. 3:30pmA Comparative Study ofJoint Efficiency forAdvanced High Strength Steels 193
by Ted Coon, Ford Motor Company, Dearborn, Ml
John Bohr, General Motors R&D, Warren, Ml
Justin Hunt, AET Integration, Inc., Wixom, Ml
E. 4:00pmThe Effect ofAlloying Elements on the Resistance Spot Weld Performance in High Strength DualPhase Steels 195
by Murali Tumuluru, U.S. Steel, Munhall, PATakahiro Kashima, Kobe Steel, Japan
F. 4:30pmEvaluation ofthe Partial Interfacial Fracture During Mechanical Testing for Spot-Welded AdvancedHigh Strength Steels 201
by Yeong-Do Park and Sang-Min Lee, Dong-Eui University, Busan, South Korea
Du-Youl Choi and Ji-Ho Lim, POSCO, Gwangyang-Si, South Korea
Wednesday, November 18,20098:00 AM-12:00 PM
Room: N138
Chair: Wangen Lin, Pratt & Whitney, Hartford, CT
SESSION 11: Weldability
A. 8:00am
Arc Waveform andNi-Cr-Fe weld Overlay Quality.203
by Yoni Adonyi, and Steve Wolbert, LeToumeau University, Longview, TX
Jordan Smith, Arc Specialties, Houston, TX
B. 8:30am
Failure Analysis of Welded Pipe Supports205
by Mikal C. Balmforth and John Wise, Exponent, Inc., Matick, MA
C. 9:00am
High Chromium Nickel-Base Weld Filler Metals 207
by Steve McCracken, Electric Power Research Institute, Charlotte, NC
Boian Alexandrov, John Lippold, Jeffrey Sowards and Adam Hope, The Ohio State University, Columbus, OH
D. 9:30am
Diffusible Hydrogen Characteristics of Hybrid LaserArc Welding 209
by Paul A. Blomquist, Applied Thermal Sciences, Sanford, ME
Stan Ferree, ESAB Welding and Cutting Products, Hanover, PA
Dale Anderson and Brian Marx, Concurrent Technologies Corp., Johnstown, PA
E. 10:00am
A Comparison ofthe High Temperature Corrosion Resistance of Co-Extruded and Weid Overlay Coatings for
Corrosion Protection in Coal Fired Boilers 211
by John N. DuPont, Lehigh University, Bethlehem, PA
William Van Geertruyden, EMWTechnologies, Bethlehem, PA
T. Caizza, Plymouth Engineered Shapes, Hopkinsville, KY
F. 10:30am
Welding Technology forReeled Linepipe used in Offshore Sour Service Applications 273
by Germanique Pickens, Craig Monahan and Rick Noecker, ExxonMobil Development Co., Houston, TX
G. 11:00am
GTAWand LBWof304 to 304L Stainless Steels 215
by P.W. Hochnanadel, M.Q. Johnson, T.J. Lienert, J. Martinez and R. Martinez, Los Alamos National Laboratory,Los Alamos, NM
H. 11:30am
Effects ofLocal CrAdditions on Solidification Mode and Cracking in
PulsedLaser Welds on 304L Stainless Steel 219
by T.J. Lienert, PA. Papin, CT. Neckerand D.J.Alexander, Los Alamos National Laboratory, Los Alamos, NM
Wednesday, November 18, 2009
8:00 AM -12:00 PM
Room: N139
Chair: Johnnie DeLoach, Nava! Surface Warfare Center, West Bethesda, MD
SESSION 12: Shipbuilding
A. 8:00am
Microstuctutal Evolution and Mechanical Properties ofa New High Strength Steel forDefense Applications 221
by Jeff D. Farren and John DuPont, Lehigh University, Bethlehem, PA
B. 8:30am
Atom Probe Tomography ofCu Precipitates in HAZ of Steel. 223
by Xinghua Yu, Jeremy Caron, Suresh Babu and John Lippold, The Ohio State University, Columbus, OH
C. 9:00am
Qualification of HLAW ofHSLA-80 Under Naval Vessel Rules 225
by Paul A. Blomquist and Carl Chretien, Applied Thermal Sciences, Sanford, ME
Erik Oiler and Brian Marx, Concurrent Technologies Corp., Johnstown, PA
D. 9:30am
Weldability Evaluation ofBlast-ResistantNaval Steel 227
by Jeremy Caron and John Lippold, The Ohio State University, Columbus, OH
E. 10:00am
Airbone Weld Fume Emission Profiles ofHLAW. 231
by Paul A. Blomquist, Applied Thermal Sciences, Sanford, ME
Dan Chute, Atrium Environmental Health and Safety Services, Reston, VA
F. 10:30am
Size-Fractionated Stainless Steel Welding Fumes Emissions in an Isokinetic Chamber
and in the Breathing Zone
Abstract not available at the time ofpublication
)y S. Erdal, J.J. Schauer, J. Breskey and E. Indacochea, UIC-UW-M
Category B: 4-Year Degree Student Level
PCB1 Comparison of CC and CV Power Supplies for FCAW-G Welding 235Jason Livingston.Katelynn Carr and Kevin Gockenbach, The Ohio State University, Columbus, OH
PCB2 Effect ofPre-Heating on Vibration Welding of ThermoplasticsPoster not available at the time ofpublicationJohn Daubert, Andy Thompson, Margaret Zantow, Avraham Benatar and Sean Flowers,The Ohio State University, Columbus, OH
PCB3 Nickel Alloy electrodes for Welding 9% Ni Steels
Poster not available at the time of publicationOmar Khan, Dan Whiting and Drew McCord, The Ohio State University, Columbus, OH - CANCELLED
PCB4 Larger Diameter Wire Joining for Continuous Wire FeedingPoster not available at the time ofpublicationBlake McAllister, Roman Martynyuk and Richard Brawley, The Ohio State University, Columbus, OH
PCB5 Evaluating Automated Extended Stickout GMAW. 237Adam O'Brien, Nathan Mandeville and Joseph Doyle, The Ohio State University, Columbus, OH
PCB6 Process Evaluation ofSAW With Strip Electrod 239Drew Spears, James McClellan and Zane Bogosian, The Ohio State University, Columbus, OH
PCB7 Weld Repair ofCracks In Hastelloy-X 241Frank Argentine, Jason Hurst and James Rule, The Ohio State University, Columbus, OH
PCB8 Tool Design Optimization in Friction Stir Welding 243
Brent Ludwig, Ken Bean Jr., Mitch Plant, Devin Hartshorn and Scott Grove,Materials Joining Engineer, Longview, TX
PCB9 A Study on theAs-welded Surface Cleanliness andAppearance of GMA Welds 245
Shane Krause and Tanner Patterson, Montana Tech of The University of Montana, Butte, MT
Category C: Graduate Degree Student Level
PCC1 Hardness nanoindentation study ofHAZ in RSW ofAHSS
Poster not available at the time ofpublicationVictor H. Baltazar Hernandez, Norman Y. Zhou, University of Waterloo/Centre for Advanced
Materials Joining, Waterloo, ON Canada - CANCELLED
PCC2 Integrated Experimental and Numerical System for GMAWProcess Monitoring and Control 247
Julien Chapuis, Fabien Soulie, Laboratoire de Mecanique et Genie Civil (LMGC), Montpellier FRANCE
PCC3 The Effects ofSAW Variables on the Penetration Porfile Shapes and CVN
Fracture Energies ofPipeline Steels 249
Joel Pepin, Dr. Hani Henein and Dr. Douglas Ivey, University of Alberta, Edmonton, Alberta, Canada
top related