aerogen nebulizer - rt connection · 30 min. - press & release continuous mode - 3 sec. hold...

Aerogen Nebulizer

Adult Ventilator Use

Parts1. Aerogen Neb2. T-Piece*3. Controller box4. Controller cable5. AC Adapter6. Mounting bracket7. Continuous Neb

tube set

*Adult sized

Set-up

Aerogen Controller

Adding meds

• Uncap thesilicone plugand introducethe medication

• Make sure theAerogen isupright.

Syringe Pump

• Power on

• Press #4

Syringe Pump

• Hit the oval keybelow “MORE” atthe bottom of thescreen

• Choose “1” ML/HR

• On the nextscreen, choose “1”B-D (not shown)

Syringe Pump

• Load prepared syringe(note: this is a syringe andtubing specially designedfor this application,available in the RTdepartment)

• Use the lever on the endto set move arm and locksyringe in place.

• Hit “ENTER” when done

Syringe Pump

Syringe Pump

• Type 12 and hit“ENTER”

• At this screen, hit“Disable”, leaving thebox blank.

• Choose “YES” toconfirm settings (Notshown)

Syringe Pump

• Press “BOLUS” key toprime tubing(remove the air fromtubing.

• Press “EXIT” whenpriming is complete

• Press the START key