applicator version 11 - portal.endress.com
Post on 26-Dec-2021
3 Views
Preview:
TRANSCRIPT
11/19/2021
Products Solutions Services
Applicator version 11.13
Release Notes
Slide 1
11/19/2021
Table of contents
• Industry-specific section
• Product Selection
• Product Sizing
• Offline project Module
• Additional information
Slide 2
11/19/2021
Industry-specific section
Available Industry Applications
Access predefined applications with “best fit” products for each specific measuring point:
• Supply chain and storage
• Core processes
• Potable water
• Wastewater / Sludge treatment
• Dairy
• Beverages
• Food utilities
• Biotech
• Water purification and distribution
• Upstream
• Midstream
• Downstream Refining
• Hydroelectric power plant
• Steam Plant• Cement
Slide 3
11/19/2021
Product Selection
Changes – Enhanced “Add your selection to download” function
• All printed files are added to the file download section
• You can manage (send, download or delete) all files into this central section
• By selecting “Add your selection to download” a pre-specification sheet
will be added to the file download with following information:
• Your selected parameters
• The Products added to the cart
• The Products in comparison
Slide 4
File download section
11/19/2021
Product Selection
New products – Flow
Prosonic Flow W 400
Clamp-on meter with Heartbeat Technology and web server for the water
and wastewater industry
• Low capital investment – cost-effectiveness increases with pipe diameter (up to DN
4000/156")
• Long-term stable signal – maintenance-free permanent mounting from outside with
coupling pads
• Reliable measurement on various pipe materials – sensor for GRP and plastic pipes available
• Safe operation – no need to open the device due to display with touch control, background
lighting
• Full remote access – web server
• Integrated diagnostics, verification and monitoring – Heartbeat Technology
Slide 5
11/19/2021
Product Selection
New products – Flow
Prosonic Flow I 400
Insertion meter with Heartbeat Technology and web server for the water and
wastewater industry
• Low capital investment – cost-effectiveness increases with pipe diameter (up to DN
4000/156")
• Long-term stable signal – maintenance-free permanent mounting from outside with coupling
pads
• Process transparency – diagnostic capability
• Safe operation – no need to open the device due to display with touch control, background
lighting
• Full remote access – web server
• Integrated diagnostics, verification and monitoring – Heartbeat Technology
Slide 6
11/19/2021
Improvements – Sizing Flow
• Improved Prosonic Flow W 400 sensor distance calculation
• Improved Prosonic Flow P 500 sensor selection, sensor distance calculation, sensor position
and process temperature suggestions
• Further improvements to Concentration/Density redesign
• Improvements to Promag W 800 Battery lifetime calculation
• Added new mass measuring error to Promass K 10
• Improved Prowirl Inlet Run influence calculation
• Added a new line to requested flow to be able to show two units next to each other
Product Sizing
Slide 7
11/19/2021
Improvements – Sizing Overfill Protection
• Linearization curve of the conical tank head and tank bottom improved
• Nozzle calculation for conical and customized vaulting radius tank head added
• Calculation of total tank length for horizontal bullet tanks
Product Sizing
Slide 8
11/19/2021
Improvements – Sizing Diaphragm seal
Dimensioning of new process connections, like separators and flush mounted threads, with the Endress+Hauser
designed 316 L and AlloyC TempC membranes:
• To minimize ambient and process temperature effects
• To increase safety and productivity of the monitored
processes in the plant
Products:
• Cerabar PMP55, PMP75, Deltabar FMD78
• Cerabar PMP51B, PMP71B, Deltabar PMD78B
Product Sizing
Slide 9
Separator threaded
Separator welded
Thread, Flush mounted
11/19/2021
New features – Sizing Pressure Performance
For products with diaphragm seals the values of “Maximum offset after installation“ can be added
to the total performance of the transmitter:
• New button “ Include diaphragm seal”
• Add the minimum, nominal and maximum values of “Maximum offset after installation“ calculated in
Sizing diaphragm seal
• The Total performance of the transmitter and the diaphragm seal is automatically summed up and
displayed in “Total performance with calibration offset”
Product Sizing
Slide 10
11/19/2021
Offline Project Module
New function – Import your Offline Projects into MyProject or CEP
A batch download functionality allows you to download your full
project database in one step
• In a first step, you can download your full Project Database
including all your local Applicator Projects
• In a second step, you can import one-by-one each
Applicator project into your new Engineering tools:
• External users: into your My Endress+Hauser account
(more information here)
• Internal users: into your CEP opportunity
(more information here)
Slide 11
Export Project Database function
11/19/2021
Additional information
Update your locally installed Applicator
Step 1:Press “install” to update your local Applicator
Step 2:Press “OK” to update your Local W@M Toolset
Slide 12
11/19/2021
Due to technological updates, compatibility issues may occur.
For any technical support requests, please use the Help Desk form under "Help/Contact us”
Additional information
Technical Support can be requested through“Help/Contact us”
Slide 13
top related