bandsaws cutting capabilities 1. shearing is a metal fabricating process used to cut straight lines...

BANDSAWSCUTTING CAPABILITIES

1

Shearing is a metal fabricating process used to cut straight lines on flat metal stock. During the shearing process, an upper blade and a lower blade are forced past each other with the space between them determined by a required offset. Normally, one of the blades remains stationary.

The shearing process characteristics include:

Its ability to make straight-line cuts on flat sheet stock Metal placement between an upper and lower shear blades Its trademark production of burred and slightly deformed metal edges Its ability to cut relatively small lengths of material at any time since the shearing blades can be mounted at an angle to reduce the necessary shearing force required.

2

SHEARINGCUTTING CAPABILITIES

Water Jet

Waterjet cutting is often used during fabrication of machine parts. It is the preferred method when the materials being cut are sensitive to the high temperatures generated by other methods.

3

CNC CUTTINGCUTTING CAPABILITIES

Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut by this process include Carbon steel, Stainless Steel and Aluminum

4

CNC CUTTINGCUTTING CAPABILITIES

Plasma

The oxyfuel process is the most widely applied industrial thermal cutting processbecause it can cut thicknesses from 0.5mm to 250mmCNC CUTTING

CUTTING CAPABILITIES

5

OxyFuel

A brake press, is a machine tool for bending sheet and plate material, most commonly sheet metal It forms predetermined bends by clamping the workpiece between a matching punch and die.

PRESS BRAKE SHAPING CAPABILITIES

6

A shaper is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical

7

MECHANICAL SHAPERSSHAPING CAPABILITIES

Curving of shaped steel sections and flat plateAngles, pipe, square tubes, I beams, channelsSHAPING CAPABILITIES

8

Lathe WorkSheet metal notchingPipe NotchingPlate Bevalling

Lathe Work

Sheet metal notching

Plate Bevalling

Pipe Notching

MACHINING AND SMALL FABRICATION CAPABILITIES

9

Heavy Steel DrillingMilling vertical / horizontalPunchingNotchingShearing

MACHINING AND HEAVY FABRICATION CAPABILITIES

10

SPECIFIC FABRICATIONS

11

Curtain Wall and Cladding Support Brackets.

Custom Flanges

SAMPLE FABRICATIONS

12

SAMPLE FABRICATIONS

13

SAMPLE FABRICATIONS

14

SAMPLE FABRICATIONS

15

FastCAM® Shape Cutting for Plate

FastNEST® True Shape Nesting for PlateFastPLOT™ NC Code Simulation

3D Modelling

Bandsaw Cutting Plan

16

SOFTWARE ASSISTANCE

MVD Bending CNC Software