blue eyes intelligence engineering and sciences publication€¦ · associate professor and head,...
Post on 07-Aug-2020
1 Views
Preview:
TRANSCRIPT
Editor-In-Chief Chair Dr. Shiv Kumar
Ph.D. (CSE), M.Tech. (IT, Honors), B.Tech. (IT), Senior Member of IEEE
Professor, Department of Computer Science & Engineering, Lakshmi Narain College of Technology Excellence (LNCTE), Bhopal
(M.P.), India
Associated Editor-In-Chief Chair Dr. Vinod Kumar Singh
Associate Professor and Head, Department of Electrical Engineering, S.R.Group of Institutions, Jhansi (U.P.), India
Associated Editor-In-Chief Members Dr. Hai Shanker Hota
Ph.D. (CSE), MCA, MSc (Mathematics)
Professor & Head, Department of CS, Bilaspur University, Bilaspur (C.G.), India
Dr. Gamal Abd El-Nasser Ahmed Mohamed Said
Ph.D(CSE), MS(CSE), BSc(EE)
Department of Computer and Information Technology , Port Training Institute, Arab Academy for Science ,Technology and Maritime
Transport, Egypt
Dr. Mayank Singh
PDF (Purs), Ph.D(CSE), ME(Software Engineering), BE(CSE), SMACM, MIEEE, LMCSI, SMIACSIT
Department of Electrical, Electronic and Computer Engineering, School of Engineering, Howard College, University of KwaZulu-
Natal, Durban, South Africa.
Scientific Editors Prof. (Dr.) Hamid Saremi
Vice Chancellor of Islamic Azad University of Iran, Quchan Branch, Quchan-Iran
Dr. Moinuddin Sarker
Vice President of Research & Development, Head of Science Team, Natural State Research, Inc., 37 Brown House Road (2nd Floor)
Stamford, USA.
Dr. Shanmugha Priya. Pon
Principal, Department of Commerce and Management, St. Joseph College of Management and Finance, Makambako, Tanzania, East
Africa, Tanzania
Dr. Veronica Mc Gowan
Associate Professor, Department of Computer and Business Information Systems,Delaware Valley College, Doylestown, PA, Allman,
China.
Dr. Fadiya Samson Oluwaseun
Assistant Professor, Girne American University, as a Lecturer & International Admission Officer (African Region) Girne, Northern
Cyprus, Turkey.
Dr. Robert Brian Smith
International Development Assistance Consultant, Department of AEC Consultants Pty Ltd, AEC Consultants Pty Ltd, Macquarie
Centre, North Ryde, New South Wales, Australia
Dr. Durgesh Mishra
Professor & Dean (R&D), Acropolis Institute of Technology, Indore (M.P.), India
Executive Editor Chair Dr. Deepak Garg
Professor & Head, Department Of Computer Science And Engineering, Bennett University, Times Group, Greater Noida (UP), India
Executive Editor Members Dr. Vahid Nourani
Professor, Faculty of Civil Engineering, University of Tabriz, Iran.
Dr. Saber Mohamed Abd-Allah
Associate Professor, Department of Biochemistry, Shanghai Institute of Biochemistry and Cell Biology, Shanghai, China.
Dr. Xiaoguang Yue
Associate Professor, Department of Computer and Information, Southwest Forestry University, Kunming (Yunnan), China.
Dr. Labib Francis Gergis Rofaiel
Associate Professor, Department of Digital Communications and Electronics, Misr Academy for Engineering and Technology,
Mansoura, Egypt.
Dr. Hugo A.F.A. Santos
ICES, Institute for Computational Engineering and Sciences, The University of Texas, Austin, USA.
Dr. Sunandan Bhunia
Associate Professor & Head, Department of Electronics & Communication Engineering, Haldia Institute of Technology, Haldia
(Bengal), India.
Dr. Awatif Mohammed Ali Elsiddieg
Assistant Professor, Department of Mathematics, Faculty of Science and Humatarian Studies, Elnielain University, Khartoum Sudan,
Saudi Arabia.
Technical Program Committee Chair Dr. Mohd. Nazri Ismail
Associate Professor, Department of System and Networking, University of Kuala (UniKL), Kuala Lumpur, Malaysia.
Technical Program Committee Members Dr. Haw Su Cheng
Faculty of Information Technology, Multimedia University (MMU), Jalan Multimedia (Cyberjaya), Malaysia.
Dr. Hasan. A. M Al Dabbas
Chairperson, Vice Dean Faculty of Engineering, Department of Mechanical Engineering, Philadelphia University, Amman, Jordan.
Dr. Gabil Adilov
Professor, Department of Mathematics, Akdeniz University, Konyaaltı/Antalya, Turkey.
Dr. Ch.V. Raghavendran
Professor, Department of Computer Science & Engineering, Ideal College of Arts and Sciences Kakinada (Andhra Pradesh), India.
Dr. Thanhtrung Dang
Associate Professor & Vice-Dean, Department of Vehicle and Energy Engineeering, HCMC University of Technology and Education,
Hochiminh, Vietnam.
Dr. Wilson Udo Udofia
Associate Professor, Department of Technical Education, State College of Education, Afaha Nsit, Akwa Ibom, Nigeria.
Convener Chair Mr. Jitendra Kumar Sen
Blue Eyes Intelligence Engineering & Sciences Publication Pvt. Ltd., Bhopal(M.P.), India
Editorial Chair Dr. Sameh Ghanem Salem Zaghloul
Department of Radar, Military Technical College, Cairo Governorate, Egypt.
Editorial Members Dr. Uma Shanker
Professor, Department of Mathematics, Muzafferpur Institute of Technology, Muzafferpur(Bihar), India
Dr. Rama Shanker
Professor & Head, Department of Statistics, Eritrea Institute of Technology, Asmara, Eritrea
Dr. Vinita Kumar
Department of Physics, Dr. D. Ram D A V Public School, Danapur, Patna(Bihar), India
Dr. Brijesh Singh
Senior Yoga Expert and Head, Department of Yoga, Samutakarsha Academy of Yoga, Music & Holistic Living, Prahladnagar,
Ahmedabad (Gujarat), India.
Dr. J. Gladson Maria Britto
Professor, Department of Computer Science & Engineering, Malla Reddy College of Engineering, Secunderabad (Telangana), India.
Dr. Sunil Tekale
Professor, Dean Academics, Department of Computer Science & Engineering, Malla Reddy College of Engineering, Secunderabad
(Telangana), India.
S.
No
Volume-6 Issue-1, August 2019, ISSN: 2319–6386 (Online)
Published By: Blue Eyes Intelligence Engineering & Sciences Publication
Page
No.
1.
Authors: F.M Habineza, J. N Nsengiyumva, Abednego O. Gwaya, Stephen Diang’a
Paper Title: Investigation on Construction Solid Wastes Management within Building Sites Environment in Kigali City
Abstract: The largest volume of construction work in the country is mainly concentrated in this city and improper
demolition of construction waste cause improper handling to construction sites. The general objective of the study will
investigate on the construction solid and demolition waste management in Kigali City. A cross sectional survey among
the construction companies was conducted from 60 contractors by purposive sampling. The research targeted all
construction practitioners in various active sites of Kigali city. Sources of data for this study were obtained through
questionnaires, interviews and site surveys. Descriptive statistics will be applied to analyze quantitative and qualitative
data through SPSS 16 and STATA 13.0 computer package. Analysis of Variance was used to test the relationship
between Methods of CSWM and its types of demolished waste by level of satisfaction. The key findings showed that
the most construction solid waste identified on construction sites were woods; scrap metals; cement; bricks and trees
respectively and the construction companies suggested that those wastes are available on their construction sites and
they should be demolished properly. The second category of CSWM identified were insulation; nails; plaster; rocks;
dirt and asbestos respectively according to their means and standard deviation. Furthermore, for thermal treatment, the
study findings concluded that there is open burning and the respondents were fairly on the adopted methods for waste
treatment. Secondary there are incineration and Pyrolysis which are used to treatment waste from construction sites and
all respondents were not satisfied on their application to treat waste. Lastly the study findings concluded that there are
gasification and is not usually used as the heads of sites were very unsatisfied. The cost associated with SWM for
practitioners and it is ranged from 6,000,000Frws-9,000,000Frws used cost of Vegetation/ top soil (site clearance), cost
of reinforced concrete, cost of Scrap metals, cost of rocks and municipal waste respectively to clean the construction
environment.The next category of cost was valued in ranged of waste costing above 3,000,000Frws-6,000,000Frws and
those were the cost of bricks/ tiles demolition, cost of wooden materials and other non inert waste demolition, cost of
debris of pipes demolition, cost of sewage demolition and cost of chemical waste (waste oil, lubricants, paints&
solvents) demolition from the construction sites respectively. The revenues associated on CSWM ranged from
6,000,000Frws -9,000,000Frws for Vegetation/ top soil (site clearance), Reinforced concrete, Scrap metals, Wooden
materials and other non inert waste and Municipal waste management that may generate high level of incomes; and
from 3,000,000Frws-6,000,000Frws for Rocks, Sewage and Chemical waste (waste oil, lubricants, paints& solvents)
waste.
Keywords: Construction waste, demolition waste, waste management and Analysis of Variance (ANOVA).
References: 1. Ailabouni, N., Gidado, K., & Painting, N. (2007). Factors affecting employee productivity in the UAE construction industry. Paper presented
at the Proceeding Conference for Postgraduate Researchers of the Built and Natural Environment (PRoBE).
2. Akhir, N. S. M. (2015). Risk Level of Factors Causing Construction Waste Generation Throughout Construction Project Life Cycle. Universiti
Tun Hussein Onn Malaysia. 3. Augustine, S. (2011). Managing Waste and Cost in the Construction Industry: A Case Study of the Road Construction. Kwame Nkrumah
University of Science and Technology.
4. Awosan, K. J., Oche, M. O., Yunusa, E. U., Raji, M. O., Isah, B. A., Aminu, K. U., . . . Kuna, A. M. (2017). Knowledge, risk perception and practices regarding the hazards of unsanitary solid waste disposal among small-scale business operators in Sokoto, Nigeria. International
Journal of Tropical Disease and Health, 26(2), 1-10.
5. Begum, R. A., Siwar, C., Pereira, J. J., & Jaafar, A. H. (2006). A benefit–cost analysis on the economic feasibility of construction waste
minimisation: the case of Malaysia. Resources, conservation and recycling, 48(1), 86-98.
6. BPs, B. (2004). UNDP. 2004. Indonesia Laporan Pembangunan Manusia.
7. Cao, S., Xu, D., & Liu, S. (2018). A Study of the Relationships between the Characteristics of the Village Population Structure and Rural Residential Solid Waste Collection Services: Evidence from China. International journal of environmental research and public health, 15(11),
2352.
8. Chini, A., & Bruening, S. (2003). Report 10-Deconstruction and Materials Reuse in the United States. The future of sustainable construction, 14.
9. Durant, S. (2012). The practical applications of solid waste management for base camps during peacekeeping operations in Africa. University
of Pretoria. 10. Ekane, N., Kjellén, M., Noel, S., & Fogde, M. (2012). Sanitation and Hygiene: Policy, Stated Beliefs and Actual Practice A Case Study in the
Burera District, Rwanda: Stockholm Environmental Institute Working Paper.
11. Imimole, D.-W. O. (2018). The identification of non-value adding activities associated with site management in the Nigerian construction industry. Cape Peninsula University of Technology.
12. Kralj, D. (2011). Innovative systemic approach for promoting sustainable innovation for zero construction waste. Kybernetes, 40(1/2), 275-
289. 13. Lu, W., & Yuan, H. (2011). A framework for understanding waste management studies in construction. Waste management, 31(6), 1252-
1260.
14. Mohamad, N., Iman, M. A., Mydin, M. O., Samad, A., Rosli, J., & Noorwirdawati, A. (2018). Mechanical properties and flexure behaviour of lightweight foamed concrete incorporating coir fibre. Paper presented at the IOP Conference Series: Earth and Environmental Science.
15. Muleya, F., & Kamalondo, H. (2017). An Investigation of Waste Management Practices in the Zambian Construction Industry. Journal of
Building Construction and Planning Research, 5(01), 1. 16. Mwesigye, P., Mbogoma, J., Nyakang’o, J., Afari Idan, I., Kapindula, D., Hassan, S., & Van Berkel, R. (2009). Africa review report on waste
management Main Report. Prepared for UNIDO, Addis Ababa Google Scholar.
17. Nagapan, S., Rahman, I. A., & Asmi, A. (2012). Factors contributing to physical and non-physical waste generation in construction industry. International Journal of Advances in Applied Sciences, 1(1), 1-10.
18. Nagapan, S., Rahman, I. A., Asmi, A., Memon, A. H., & Latif, I. (2012). Issues on construction waste: The need for sustainable waste
management. Paper presented at the Humanities, Science and Engineering (CHUSER), 2012 IEEE Colloquium on. 19. Niragire, F. (2017). Spatial modelling of the relationship between HIV prevalence and determinants of child mortality in Rwanda. University
of Rwanda.
1-10
20. Osafo, S. S. (2015). An examination of the attitudes of traders towards environmental sanitation at the Hohoe Market in the Volta Region. 21. Oyekale, A. S. (2017). Determinants of households’ involvement in waste separation and collection for recycling in South Africa.
Environment, Development and Sustainability, 1-29.
22. Saikia, N., & de Brito, J. (2010). Use of industrial waste and municipality solid waste as aggregate, filler or fiber in cement mortar and concrete. Advances in Material Science Research. Nova Science Publishers, 3, 65-116.
23. Sankoh, F. P., Yan, X., & Tran, Q. (2014). Assessment of solid waste management in Freetown, Sierra Leone towards sustainable
development. Journal of Applied Sciences, 14(22), 2909-2924. 24. Sano, J. C. (2007). URBAN ENVIRONMENTAL INFRASTRUCTURE IN KIGALI CITY RWANDA. Challenges and opportunities for
modernised decentralised sanitation systems in poor neighbourhoods. Wageningen University, Wageningen.
25. Senaratne, S., Gerace, D., Mirza, O., Tam, V. W., & Kang, W.-H. (2016). The costs and benefits of combining recycled aggregate with steel fibres as a sustainable, structural material. Journal of Cleaner Production, 112, 2318-2327.
26. Sood, D. (2004). Solid waste management study for Freetown, Sierra Leone. Component Design for the World Bank, Draft Report Project No.
P078389, the Government of Sierra Leone, Freetown. Sierra Leone, February. 27. Tam, V. W. (2008). On the effectiveness in implementing a waste-management-plan method in construction. Waste management, 28(6), 1072-
1080.
28. Troschinetz, A. M., & Mihelcic, J. R. (2009). Sustainable recycling of municipal solid waste in developing countries. Waste management, 29(2), 915-923.
29. Yeheyis, M., Hewage, K., Alam, M. S., Eskicioglu, C., & Sadiq, R. (2013). An overview of construction and demolition waste management in
Canada: a lifecycle analysis approach to sustainability. Clean Technologies and Environmental Policy, 15(1), 81-91. 30. Yuan, H. (2013). Key indicators for assessing the effectiveness of waste management in construction projects. Ecological Indicators, 24, 476-
484.
31. Yusof, M. F. (2006). Study on Construction & Demolition Waste Management in Construction Site. UMP.
2.
Authors: Sumanta Kumar Kundu, Pramod Kumar Singhal
Paper Title: Design of slit loaded Planar and Curved Patch Antenna
Abstract: Slit loaded circularly polarized patch antenna embedded on planar structure and curvature structure were
investigated. The curvature effect on slit loaded patch antenna determines the limiting value of radius of curvature to
obtain circular polarization. At a certain radius of curvature (ROC) around 131.3 mm, circular polarization have been
obtained with axial ratio band width around 15 MHz and return loss bandwidth around 56 MHz compared with 17
MHz and 65 MHz as that of planar structure. The beam width responsible for coverage of planar patch are 104 and 107
degree with respect to 84 degree and 124 degree of curved patch at phi = 0 and 90 degree respectively.
Keywords: Circular polarization, Curved antenna, Radius of curvature, 3 dB axial ratio beam width .
References: 1. Gupta, Samir Dev,” Design of Microstrip Antenna conformable to both planar and cylindrical surfaces for Aircraft Systems” Shodhganga : a
reservoir of Indian theses @ INFLIBNET.
2. C. A. Balanis, “Antenna Theory, Analysis and Design,” John Wiley & Sons, New York, second edition 1997.
3. Keith Carver, James W. Mink, “Microstrip antenna technology” IEEE transactions on antennas and propagation”,vol.29, no. 1, January 1981. 4. Sin Keng Lee, A. Sambell, E. Korolkiewicz, and S. F. Ooi, “analysis and design of a circular-polarized nearly square-patch antenna using a
cavity model” microwave and optical technology letters / Vol. 46, No. 4, August 20 2005
5. M.Mak, Kwai Man Luk, "A Circularly Polarized Antenna With Wide Axial Ratio Beamwidth", IEEE Transactions on Antennas and Propagation ( Volume: 57 , Issue: 10 , Oct. 2009 ).
6. Nasimuddin, Y. S. Anjani, and A. Alphones, " A Wide-Beam circularly polarized Asymmetric-Microstrip Antenna " IEEE Transactions on
Antennas and Propagation 2015. 7. L.Wong,W. H. Hsu, and C. K.Wu, “Single-feed circularly polarized microstrip antenna with a slit,” Microwave Opt. Technol. Lett. 18, 306–308,
July 1998.
8. Kin Lu wong, “compact broadband antenna” John Wiley & Sons, 9. E. Munson, “Conformal Microstrip Antennas and Microstrip Phased Arrays”, IEEE Trans. Antenna Propagate. , vol. AP-22, no. 1, January 1974,
pp. 74-78.
10. Kin-Lu Wong and Shyh-Yeong Ke,“Cylindrical-Rectangular Microstrip Patch Antenna for Circular Polarization”, IEEE transactions on antennas and propagation, vol. 41, 2, February 1993.
11. S. Dahele, R. J. Mitchell, K. M. Luk, and K. F. Lee, “Effect of curvature on characteristics of rectangular patch antenna,” Electron.Lett., vol. 23,
pp. 748-749, July 1987. 12. M. Krowne, “Cylindrical rectangular microstrip antenna.” IEEE Trans. Antennas Propagat., vol. AP-31. pp. 194-199, 1983.
13. K M Luk and K F Lee, “Analysis of the cylindrical –Rectangular patch antenna”, IEEE Trans. Antennas Propagat., 37, no.2 Feb 1989.
14. CST microwave Studio suite
11-14
top related