brief introduction to (vuv/)soft x-ray fels r. p. walker diamond light source, uk icfa workshop on...
Post on 29-Jan-2016
215 Views
Preview:
TRANSCRIPT
Brief Introduction to (VUV/)Soft X-ray FELsBrief Introduction to (VUV/)Soft X-ray FELs
R. P. Walker
Diamond Light Source, UK
ICFA Workshop on Future Light SourcesMarch 5th-9th, 2012Thomas Jefferson National Accelerator FacilityNewport News, VA
Status of VUV/Soft X-ray FELsStatus of VUV/Soft X-ray FELs
Operating•FLASH (Germany)- so far the only operating soft X-ray User facility•FERMI@ELETTRA (Italy)- call for proposals issued; 1st external users later this year
Planned•NGLS (US): 0.28 – 1.2 keV•WiFEL (US): 5 – 900 eV•SPARX-FEL (Italy) : 30 eV – 2 keV •JLAB VUV FEL (JLAMP) (US): 600 MeV cw recirculating linac, oscillator FEL 10-100 eV
Working definition:VUV: ~200 nm – ~20 nm (5 eV – 50 eV)Soft X-ray: ~20 nm – ~1 nm (50 eV – 1 keV)
Note that X-ray FEL facilities may also operate in the soft X-ray range, or contain specific soft-X-ray FELs e.g.
•LCLS: has operated down to 400 eV
•European XFEL SASE3: 4.7 nm – 0.4 nm (260 eV to 3 keV)
•SwissFEL “Athos” at 2.4/3.1 GeV: 7 – 0.7 nm, variable polarization, HHG seeding + single-stage HGHG (or other scheme)
•PAL-XFEL SXFEL1 at 3 GeV: 1-10 nm
Many (X)FEL test facilities are in the soft X-ray range
Operating•SCSS (Japan): 250 MeV•SPARC (Italy): 200 MeV•Shanghai Deep-UV FEL (SDUV): 150 MeV
Construction•Shanghai Soft X-ray FEL (SXFEL)approved in Feb. 2011; construction started early 2012840 MeV normal conducting S-band + C-band linacpossible future upgrade to 1.3 GeV for soft X-ray user facility
Planned•CLARA (UK) •LUNEX5 (France)
See separate session on test facilities
Not to mention several projects that have “fallen by the wayside ..”
•4GLS•BESSY FEL•LUX•Arc-en-ciel•NLS … technically not dead, just not proceeding at the moment ..
Fallen by the Wayside, E.Bundy, 1886.
FLASH Radiation Parameters 2011FLASH Radiation Parameters 2011
Wavelength range (fundamental) 4.1 – 45 nmAverage single pulse energy 10 – 400 μJPulse duration (FWHM) 50 – 200 fsPeak power 1 – 3 GWAverage power (example for 3000 pulses/sec) ~ 300 mWSpectral width (FWHM) ~ 0.7 - 2 %Average Brilliance 1017 – 1021 *Peak Brilliance 1029 – 1031 *
* photons/s/mrad2/mm2/0.1%bw
• > 150 publications on photon science, many in high impact journals
• 3740 hours of SASE delivery Sep. 2010 – Sep. 2011
• Accelerator up-time ~ 96%
• SASE delivery to experiments ~ 75% (rest is tuning, set-up etc.)
FLASH-IIFLASH-II
• Construction has started
• Commissioning May 2013
• SASE: 4-60 nm
• HHG seeded: 10-40 nm (at 100 kHz)
S-band linac 1.2 GeV (later 1.5 GeV)
FERMI@ElettraFERMI@Elettra
FEL-1: HGHG down to 10nm
FEL2: two stage HGHG with fresh bunch technique, to 4 nm (1.5 GeV)
Status: operating 20-65 nm
Status: install & commission in 2012
Photon energy range 19‐62 eV (20‐65 nm)Tunability ~ 5%Polarization LV/LO/LC/RCEnergy/pulse 20‐ 30 μJEstimated pulse length <150 fsRepetition rate 10 HzFEL mode TEM00FEL bandwidth 30‐90 meV n(FWHM)FEL bandwidth ΔE/E= 6x10‐4 (rms)Photon energy fluctuations ~1.1 meV (rms)FEL bandwidth fluctuations ~ 3% (rms)
FERMI@ELETTRA Photon Beam Parameters FERMI@ELETTRA Photon Beam Parameters to dateto date
http://www.elettra.trieste.it/FERMI/index.php?n=Main.Parameter
0 100 200
Beam switchyardwith RF separators
ExperimentalAreas
300 400 500 600 700 m
Undulators
MonochromatorsSRFgun
Bunchcompressors
Superconducting L- bandelectron linear accelerator
1.7 GeV 2.2 GeV
Wisconsin FEL (WiFEL)Wisconsin FEL (WiFEL)
• 2.2 GeV CW SC linac with RF separation for many high-rep-rate beamlines
• Low charge bunches (200 pC)
• Seeding with High Harmonic Generation sources
• Cascaded harmonic generation without “fresh bunch”
• Development of a superconducting cw 200MHz electron gun is underway
• Up to 100 kHz• High resolution• ~Time-bandwidth limited• 1011 – 1012 photons/pulse• 10-3 – 5x10-5 ∆/
• High-resolution spectroscopy
• Diffractive imaging (with harmonics)
• Up to 100 kHz• Ultra-fast• 250 as pulses• Two color• 108 ph/pulse
• Highest rep rate, MHz
• High flux• 1011 - 1012
photon/pulse• 100 W
• MultidimensionalX-ray spectroscopy
• Diffractive imaging(at highest rate)
• Photon correlationspectroscopy
10 μs10 μs
5 – 150 fs
~10–100 fs~10–100 fs
0.25 – 25fs
≤1 μs≤1 μs
5 – 250 fs
NGLSNGLS
Seeded or self-seeded 2 color seeded SASE or self-seeded
High rep. rate soft X-ray FEL facility; 2.4 GeV cw s/c linac o Up to 106 pulses per secondo Seededo Ultrashort pulses from 250 as – 250 fso Narrow energy bandwidth to 50 meVo Adjustable photon energy from 280 eV – 1.2 keVo Polarization control 3 initial beamlines:
NGLSNGLS• LBNL submitted a proposal
to DoE in December 2010
• DOE approved CD-0: “Mission Need” for a Next Generation Light Source in April 2011
• Currently no DOE budget to pursue a Project
• LBNL is – Performing Accelerator
and Detector R&D– Performing feasibility
studies which will inform a Conceptual Design
Users’ RequirementsUsers’ Requirements
high pulse energy
transverse coherence
fs pulses (or less)
polarization control
easy tunability
multiple, simultaneous users
high repetition rate
regularly spaced pulses
THz radiation in synchronism with FEL
two-colour FEL pulses
longitudinal coherence / pulse uniformity*
high degree of amplitude stability*
small linewidth*
precise synchronism with lasers for pump-probe expts.
Users’ RequirementsUsers’ Requirements
high pulse energy
transverse coherence
fs pulses (or less)
polarization control
easy tunability
multiple, simultaneous users
high repetition rate
regularly spaced pulses
THz radiation in synchronism with FEL
two-colour FEL pulses
longitudinal coherence / pulse uniformity*
high degree of amplitude stability*
small linewidth*
precise synchronism with lasers for pump-probe expts.
Most requirements not specific to soft X-rays …
Especially for soft-X-ray Especially for soft-X-ray FELs (?) .. that FELs (?) .. that waswas the the view, but now XFEL users view, but now XFEL users are starting to demand are starting to demand such propertiessuch properties
Users’ RequirementsUsers’ Requirements
high pulse energy
transverse coherence
fs pulses (or less)
polarization control
easy tunability
multiple, simultaneous users
high repetition rate
regularly spaced pulses
THz radiation in synchronism with FEL
two-colour FEL pulses
longitudinal coherence / pulse uniformity*
high degree of amplitude stability*
small linewidth*
precise synchronism with lasers for pump-probe expts.
SASE
Seeded* or oscillator
Users’ RequirementsUsers’ Requirements
high pulse energy
transverse coherence
fs pulses (or less) ……………………………….many different schemes
polarization control …………… APPLE/DELTA/crossed undulator etc.
easy tunability …………………………………… variable gap undulator
multiple, simultaneous users ………… electron switchyard schemes
high repetition rate ………………………………… superconducting RF
regularly spaced pulses ………………………. cw superconducting RF
THz radiation in synchronism with FEL ……………… (pre)/afterburner
two-colour FEL pulses ………………………………..… various schemes
longitudinal coherence / pulse uniformity*
high degree of amplitude stability*
small linewidth*
precise synchronism with lasers for pump-probe expts.
Technical IssuesTechnical Issues
• Seeding: - laser sources for shorter wavelength and higher rep. rate- seeding / modulation / harmonic generation schemes- modelling thereof
• Electron beam optimisation:
Bunch compression – how many?
Seeded FELs in particular require:- e- pulse shape control: flat slice parameters flat gain length
over length of seed pulse + timing jitter; even more for “fresh-bunch” schemes
- timing jitter reduction due to linac phase and voltage fluctuations
careful optimisation of gun + linac parameters to meet these requirements
Technical IssuesTechnical Issues
• Electron sources- development of a low emittance, high rep rate injector, is still an
an area of active R&D (see session on Electron Sources)
• Electron beam switching schemes for multiple FELs- magnetic or RF separation ? tolerances …
• Diagnostics (electron & photon) for low charge, short pulses
In addition, a big issue is COST particularly for high repetition rate FELs, SCRF technology, especially cw SCRF, is very expensive:
“Cost”
“Rep. rate”
cw SCRF(NLS, NGLS, WiFEL)
pulsed SCRF(FLASH, EXFEL)
~ 1 kHz NCRF
~ 100 Hz NCRF(LCLS, SACLA, PAL XFEL, SwissFEL etc.)
Science driven
currently no demand, but is there a “niche” ?
Given the wavelength range and type of machine,
how to reduce costs ? …… reduce electron beam energy
BUT:
21
2
2
2
K
nu
n
4nN
• Shorter period undulators higher fieldnew designs, materials …SCUs ? lower gap – what really is the
limit ??
• Higher harmonics- schemes to enhance harmonic
output (e.g. phase jumps)- seeding and harmonic
generation schemes
• Ultra-low emittance guns- “conventional” guns at low
charge- novel electron sources
Science driven
Could be an interesting Could be an interesting combination.. But combination.. But reduced pulse energy ..reduced pulse energy ..
Thanks for your attentionThanks for your attention
top related