bundle (3)
Post on 30-Dec-2015
72 Views
Preview:
TRANSCRIPT
Silicon NPN Phototransistor, RoHS Compliant
www.vishay.com For technical questions, contact: detectortechsupport@vishay.com Document Number: 81505346 Rev. 1.6, 05-Sep-08
BPV11FVishay Semiconductors
DESCRIPTIONBPV11F is a silicon NPN phototransistor with high radiantsensitivity in black, T-1¾ plastic package with base terminaland daylight blocking filter. Filter bandwidth is matched with900 nm to 950 nm IR emitters.
FEATURES• Package type: leaded
• Package form: T-1¾
• Dimensions (in mm): Ø 5
• High radiant sensitivity
• Daylight blocking filter matched with 940 nmemitters
• Fast response times
• Angle of half sensitivity: ϕ = ± 15°
• Base terminal connected
• Lead (Pb)-free component in accordance withRoHS 2002/95/EC and WEEE 2002/96/EC
APPLICATIONS• Detector for industrial electronic circuitry, measurement
and control
NoteTest condition see table “Basic Characteristics”
NoteMOQ: minimum order quantity
NoteTamb = 25 °C, unless otherwise specified
12784
PRODUCT SUMMARYCOMPONENT Ica (mA) ϕ (deg) λ0.5 (nm)
BPV11F 9 ± 15 900 to 980
ORDERING INFORMATIONORDERING CODE PACKAGING REMARKS PACKAGE FORM
BPV11F Bulk MOQ: 3000 pcs, 3000 pcs/bulk T-1¾
ABSOLUTE MAXIMUM RATINGSPARAMETER TEST CONDITION SYMBOL VALUE UNIT
Collector base voltage VCBO 80 V
Collector emitter voltage VCEO 70 V
Emitter base voltage VEBO 5 V
Collector current IC 50 mA
Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA
Power dissipation Tamb ≤ 47 °C PV 150 mW
Junction temperature Tj 100 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 100 °C
Soldering temperature t ≤ 5 s, 2 mm from body Tsd 260 °C
Thermal resistance junction/ambient Connected with Cu wire, 0.14 mm2 RthJA 350 K/W
Document Number: 81505 For technical questions, contact: detectortechsupport@vishay.com www.vishay.comRev. 1.6, 05-Sep-08 347
BPV11FSilicon NPN Phototransistor, RoHS Compliant Vishay Semiconductors
Fig. 1 - Power Dissipation Limit vs. Ambient Temperature
NoteTamb = 25 °C, unless otherwise specified
BASIC CHARACTERISTICSTamb = 25 °C, unless otherwise specified
Fig. 2 - Collector Dark Current vs. Ambient Temperature Fig. 3 - Relative Collector Current vs. Ambient Temperature
0
40
80
120
160
200
PV -
Pow
er D
issi
patio
n (m
W)
Tamb - Ambient Temperature (°C)100806040200
94 8300
RthJA
BASIC CHARACTERISTICSPARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Collector emitter breakdown voltage IC = 1 mA V(BR)CEO 70 V
Collector emitter dark current VCE = 10 V, E = 0 ICEO 1 50 nA
DC current gain VCE = 5 V, IC = 5 mA, E = 0 hFE 450
Collector emitter capacitance VCE = 0 V, f = 1 MHz, E = 0 CCEO 15 pF
Collector base capacitance VCE = 0 V, f = 1 MHz, E = 0 CCBO 19 pF
Collector light current Ee = 1 mW/cm2, λ = 950 nm,VCB = 5 V Ica 3 9 mA
Angle of half sensitivity ϕ ± 15 deg
Wavelength of peak sensitivity λp 930 nm
Range of spectral bandwidth λ0.5 900 to 980 nm
Collector emitter saturation voltage Ee = 1 mW/cm2, λ = 950 nm,IC = 1 mA VCEsat 130 300 mV
Turn-on time VS = 5 V, IC = 5 mA, RL = 100 Ω ton 6 µs
Turn-off time VS = 5 V, IC = 5 mA, RL = 100 Ω toff 5 µs
Cut-off frequency VS = 5 V, IC = 5 mA, RL = 100 Ω fc 110 kHz
94 8249
20
I CE
O -
Col
lect
or D
ark
Cur
rent
(nA
)
10040 60 80
Tamb - Ambient Temperature (°C)
10
101
102
103
104
VCE = 10 V
00.6
0.8
1.0
1.2
1.4
2.0
20 40 60 80 100
1.6
1.8
λ
94 8239 Tamb - Ambient Temperature (°C)
I ca r
el -
Rel
ativ
e C
olle
ctor
Cur
rent
VCE = 5 VEe = 1 mW/cm2
= 950 nm
www.vishay.com For technical questions, contact: detectortechsupport@vishay.com Document Number: 81505348 Rev. 1.6, 05-Sep-08
BPV11FVishay Semiconductors Silicon NPN Phototransistor, RoHS Compliant
Fig. 4 - Collector Light Current vs. Irradiance
Fig. 5 - Collector Light Current vs. Collector Emitter Voltage
Fig. 6 - Amplification vs. Collector Current
Fig. 7 - Collector Base Capacitance vs. Collector Base Voltage
Fig. 8 - Collector Emitter Capacitance vs. Collector Emitter Voltage
Fig. 9 - Turn-on/Turn-off Time vs. Collector Current
0.01 0.1 10.01
0.1
1
10
100
I ca -
Col
lect
or L
ight
Cur
rent
(m
A)
Ee - Irradiance (mW/cm²)
10
94 8244
VCE = 5 Vλ = 950 nm
0.1 1 100.1
1
10
100
I ca -
Col
lect
or L
ight
Cur
rent
(m
A)
VCE - Collector Emitter Voltage (V)
100
94 8245
Ee = 1 mW/cm2
λ = 950 nm
0.5 mW/cm2
0.2 mW/cm2
0.1 mW/cm2
0.05 mW/cm2
0.02 mW/cm2
0.01 0.1 1 100
200
400
600
800
B -
Am
plifi
catio
n
IC - Collector Current (mA)
100
94 8250
VCE = 5 V
0.1 1 100
4
8
12
16
20
CC
BO -
Col
lect
or B
ase
Cap
acita
nce
(pF
)
VCB - Collector Base Voltage (V)
100
94 8246
f = 1 MHz
0.1 1 100
4
8
12
16
20
CC
EO -
Col
lect
or E
rmitt
er C
apac
itanc
e (p
F)
VCE - Collector Ermitter Voltage (V)
100
94 8247
f = 1 MHz
1612840
94 8253
0
2
4
6
8
12
t on/t of
f - T
urn-
on/T
urn-
off T
ime
(µs)
IC - Collector Current (mA)
10 VCE = 5 VRL = 100 Ωλ = 950 nm
toff
ton
Document Number: 81505 For technical questions, contact: detectortechsupport@vishay.com www.vishay.comRev. 1.6, 05-Sep-08 349
BPV11FSilicon NPN Phototransistor, RoHS Compliant Vishay Semiconductors
Fig. 10 - Relative Spectral Sensitivity vs. Wavelength Fig. 11 - Relative Radiant Sensitivity vs. Angular Displacement
PACKAGE DIMENSIONS in millimeters
800 900 1000 1100
94 8258
0
0.2
0.4
0.6
0.8
1.0
S (λ)
- R
elat
ive
Spe
ctra
lSen
sitiv
ityre
l
– Wavelength (nm)λ
Sre
l - R
elat
ive
Sen
sitiv
ity
94 8248
0.6
0.9
0.8
0°30°
10° 20°
40°
50°
60°
70°
80°0.7
1.0
00.20.4
ϕ -
Ang
ular
Dis
plac
emen
t
Chip position
0.8 + 0.2- 0.1
Issue:1; 01.07.96
± 0
.15
Drawing-No.: 6.544-5188.01-4
specificationsaccording to DINtechnical drawings
0.5
Area not plane
± 0
.15
± 0
.3
± 0
.5
5.75
± 0.15
0.5
E B
5
± 0
.3
+ 0.15
0.8
C
1.5
± 0
.25
- 0.1+ 0.2
0.8 - 0.1+ 0.2
- 0.1+ 0.2
1.27 nom.2.54 nom.
12.3
(4.5
5)
7.6
35
< 0
.7
8.6
R 2.45 (sphere)
96 12200
Component Construction
Component ConstructionVishay Semiconductors
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 800811 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 06-Jun-08
Photodetector and infrared emitter components are availablein plastic or metal packages.Plastic devices mostly include a lens to improve radiantsensitivity or radiant intensity. Detector chips are mounted onflat leadframe surfaces while leadframes for emitters have asilver plated reflector performing higher radiant intensity.Devices in metal packages are hermetically sealed, arereleased for extended operating temperature range andhave small optical and mechanical tolerances.
Plastic package
IRED chip
Reflector
AnodeCathode
AU-bond wire
Lead frame
94 8314
96 11621-1
Chip Bond wire
Reflector conefilled with epoxy
Leadframe
Polarity identification
Whiteplastic case
CathodeAnode
Black plastic packagedaylight blocking filter
PIN diode chip
Collimating lens
94 8165
Cathode
Anode
PIN diode chip
Metal can package
Glass window
94 8315
Document Number: 80083 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 17-Jun-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 1
Type Designation Code
Type Designation CodeVishay Semiconductors
DETECTORS
IR EMITTERS
T, V = VishaySemiconductor
Detector
Series
Packagevarieties
Internalclassification
Technology
T = PhototransistorS = Photo Schmitt-TriggerP = PIN photodiodeD = Photodiode
E
18746
K = Side view mold
F = Plastic filterM = SMDP = Plastic
S = Side view
IR emitter
Series
Internalclassification
S
T, V = VishaySemiconductor Package design
D, F, L, T 1 = Dome SMDU, H 2 = 1.8 mmF 3 = 3 mm 4 = 3 mm without stand-offs 5 = 5 mm with stand-offs 6, 7, 8 = 5 mm without stand-offsT 7 = TO 18
Main typeDome SMDContact type0 = RGW2 = GW3 = Yoke4 = Axial
Selection type
18747
A = Extended powerF = High speed DH, 870 nmH = GaAlAs, 870 nmM = SMDS = Side view castedT = MetalU = GaAs, 950 nmK = Side view moldL = Leaded
A = 870 nm GaAlAsF = 870 nm GaAlAs/double hetero DHG = 830 nm/850 nm GaAlAs/double hetero DHL = 940 nm GaAlAs/GaAsS = 950 nm GaAs: SiB = Bulk emitter
Symbols and Terminology
Symbols and TerminologyVishay Semiconductors
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 81252542 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 18-Aug-08
A Anode, anode terminalA Ampere, SI unit of electrical currentA Radiant sensitive area, that area which is radiant
sensitive for a specified rangea Distance, e.g. between the emitter (source) and
the detectorB Base, base terminalBER Bit Error Ratebit/s Data rate or signaling rate
1000 bit/s = 1 kbit/s, 106 bit/s = 1 Mbit/sC Capacitance, unit: F (farad) = C/VC Coulomb, C = s x AC Cathode, cathode terminal C Collector, collector terminal°C Degree Celsius, Celsius temperature, symbol t,
and is defined by the quantity equation t = T - T0. The unit of Celsius temperature is the degreeCelsius, symbol °C. The numerical value of aCelsius temperature t expressed in degreesCelsius is given by t/°C = T/K - 273.15 It follows from the definition of t that the degreeCelsius is equal in magnitude to the Kelvin, whichin turn implies that the numerical value of a giventemperature difference or temperature intervalwhose value is expressed in the unit degreeCelsius (°C) is equal to the numerical value of thesame difference or interval when its value isexpressed in the unit Kelvin (K).
CCEO Collector emitter capacitance, Capacitancebetween the collector and the emitter with open base
cd Candela, SI unit of luminous intensity. Thecandela is the luminous intensity, in a givendirection, of a source that emits monochromaticradiation of frequency 540 Hz x 1012 Hz and thathas a radiant intensity in that direction of 1/683 Wper steradian. (16th General Conference ofWeights and Measures, 1979), 1 cd = 1 lm ⋅ sr -1
CD Diode capacitance, total capacitance effectivebetween the diode terminals due to case, junctionand parasitic capacitances
Cj Junction capacitance, capacitance due to a p-njunction of a diode, decreases with increasingreverse voltage
d Apparent (of virtual) source size (of an emitter), the measured diameter of an optical source usedto calculate the eye safety laser class of thesource. See IEC 60825-1 and EN ISO 11146-1
D* Detectivity E Emitter, Emitter terminal (phototransistor)EA Illumination at standard illuminant A, according
to DIN 5033 and IEC 306-1, illumination emittedfrom a tungsten filament lamp with a colortemperature Tf = 2855.6 K, which is equivalent to
standard illuminant A, unit: lx (Lux) or klxEA amb Ambient illumination at standard illuminant Aecho-off Unprecise term to describe the behavior of the
output of IrDA® transceivers during transmission.“Echo-off” means that by blocking the receiver theoutput RXD is quiet during transmission
echo-on Unprecise term to describe the behavior of theoutput of IrDA® transceivers during transmission.“Echo-on” means that the receiver output RXD isactive but often undefined during transmission. Forcorrect data reception after transmission thereceiver channel must be cleared during thelatency period
Ee, E Irradiance (at a point of a surface), quotient of theradiant flux dΦe incident on an element of thesurface containing the point, by the area dA of thatelement. Equivalent definition. Integral, taken overthe hemisphere visible from the given point, of theexpression Le ⋅ cosθ ⋅ dΩ, where Le is the radianceat the given point in the various directions of theincident elementary beams of solid angle dΩ, andθ is the angle between any of these beams and thenormal to the surface at the given point
unit: W ⋅ m-2
Ev, E Illuminance (at a point of a surface), quotient ofthe luminous flux dΦv incident on an element of thesurface containing the point, by the area dA of thatelement. Equivalent definition. Integral, taken overthe hemisphere visible from the givenpoint, of theexpression Lv ⋅ cosθ ⋅ dΩ, where Lv is theluminance at the given point in the variousdirections of the incident elementary beams ofsolid angle dΩ, and θ is the angle between any ofthese beams and the normal to the surface at thegiven point
unit: lx = lm ⋅ m-2
F Farad, unit: F = C/V
f Frequency, unit: s-1, Hz (Hertz)fc, fcd Cut-off frequency - detector devices, the
frequency at which, for constant signal modulationdepth of the input radiant power, the demodulatedsignal power has decreased to ½ of its low frequencyvalue. Example: The incident radiation generates aphotocurrent or a photo voltage 0.707 times thevalue of radiation at f = 1 kHz (3 dB signal drop, other references may occur ase.g. 6 dB or 10 dB)
A NEP⁄
EedΦedA
------------------ Le θcos dΩ⋅ ⋅⎝ ⎠⎛ ⎞
2πsr∫= =
EvdΦvdA
----------------- Lv θcos dΩ⋅ ⋅⎝ ⎠⎛ ⎞
2πsr∫= =
Symbols and TerminologySymbols and Terminology Vishay Semiconductors
Document Number: 81252 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 18-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 543
fs Switching frequency FIR Fast infrared, as SIR, data rate 4 Mbit/s
Ia Light current, general: current which flowsthrough a device due to irradiation/illumination
IB Base currentIBM Base peak currentIC Collector currentIca Collector light current, collector current under
irradiation. Collector current which flows at aspecified illumination/irradiation
ICEO Collector dark current, with open base,collector emitter dark current. For radiant sensitivedevices with open base and withoutillumination/radiation (E = 0)
ICM Repetitive peak collector currentidle Mode of operation where the device (e.g. a
transceiver) is fully operational and expecting toreceive a signal for operation e.g in case of atransceiver waiting to receive an optical input or tosend an optical output as response to an appliedelectrical signal.
Ie, I Radiant intensity (of a source, in a givendirection), quotient of the radiant flux d Φe leavingthe source and propagated in the element of solidangle dΩ containing the given direction, by theelement of solid angle. Ie = dΦe/dΩ, unit: W ⋅ sr -1 Note: The radiant intensity Ie of emitters is typicallymeasured with an angle < 0.01 sr on mechanicalaxis or off-axis in the maximum of the irradiationpattern.
IF Continuous forward current, the current flowingthrough a diode in the forward direction
IFAV Average (mean) forward currentIFM Peak forward currentIFSM Surge forward currentIk Short-circuit current, that value of the current
which flows when a photovoltaic cell or aphotodiode is short circuited (RL << Ri ) at itsterminals
Io DC output currentIph Photocurrent, that part of the output current of a
photoelectric detector, which is caused by incidentradiation.
IR Reverse current, leakage current, current whichflows through a reverse biased semiconductorp-n-junction
IR Abbreviation for infrared
Ira Reverse current under irradiation, reverse lightcurrent which flows due to a specifiedirradiation/illumination in a photoelectric device Ira = Iro + Iph
IrDA® Infrared Data Association, no profit organizationgenerating infrared data communication standards
IRED Infrared emitting diode, solid state deviceembodying a p-n junction, emitting infraredradiation when excited by an electric current. Seealso LED: solid state device embodying a p-njunction, emitting optical radiation when excited byan electric current.
Iro Reverse dark current, dark current, reversecurrent flowing through a photoelectric device inthe absence of irradiation
IRPHY Version 1.0, SIR IrDA®‚ data communicationspecification covering data rates from 2.4 kbit/sto 115.2 kbit/s and a guaranteed operating rangemore than one meter in a cone of ± 15°
IRPHY Version 1.1, MIR and FIR were implemented in theIrDA® standard with the version 1.1, replacingversion 1.0
IRPHY Version 1.2, added the SIR low power standard tothe IrDA® standard, replacing version 1.1. The SIRlow power standard describes a current savingimplementation with reduced range (min. 20 cm toother low power devices and min. 30 cm to fullrange devices).
IRPHY Version 1.3, extended the low power option to thehigher bit rates of MIR and FIR replacing version 1.2.
IRPHY Version 1.4, VFIR was added, replacing version 1.3
ISB Quiescent current
ISD Supply current in dark ambient
ISH Supply current in bright ambientIv, I Luminous intensity (of a source, in a given
direction), quotient of the luminous flux dΦv leavingthe source and propagated in the element of solidangle dΩ containing the given direction, by theelement of solid angle. Ie = dΦv/dΩ, unit: cd ⋅ sr -1
Note: The luminous intensity Iv of emitters istypically measured with an angle < 0.01 sr onmechanical axis or off-axis in the maximum of theirradiation pattern.
K luminous efficacy of radiation, quotient of theluminous flux Φv by the corresponding radiant fluxΦe: K = Φv / Φe, unit: lm ⋅ W-1 Note: When applied to monochromatic radiations,the maximum value of K(λ) is denoted by thesymbol Km. Km = 683 lm ⋅ W-1 for νm = 540 x 1012 Hz (λm ≈ 555 nm) for photopic vision. K'm = 1700 lm ⋅ W-1 for λ'm ≈ 507 nm for scotopicvision. For other wavelengths : K(λ) = Km V(λ) and K'(λ) = K'm V'(λ)
K Kelvin, SI unit of thermodynamic temperature, isthe fraction 1/273.15 of the thermodynamictemperature of the triple point of water(13th CGPM (1967), Resolution 4). The unit Kelvinand its symbol K should be used to express aninterval or a difference of temperature. Note: In addition to the thermodynamic
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 81252544 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 18-Aug-08
Symbols and TerminologyVishay Semiconductors Symbols and Terminology
temperature (symbol T), expressed in Kelvins, useis also made of Celsius temperature (symbol t)defined by the equation t = T - T0, whereT0 = 273.15 K by definition. To express Celsiustemperature, the unit “degree Celsius”, which isequal to the unit “Kelvin” is used; in this case,“degree Celsius” is a special name used in place of“Kelvin”. An interval or difference of Celsiustemperature can, however, be expressed inKelvins as well as in degrees Celsius.
Latency Receiver latency allowance (in ms or µs) is themaximum time after a node ceases transmittingbefore the node’s receiving recovers its specifiedsensitivity
LED and IRED Light Emitting Diode, LED: solid state deviceembodying a p-n junction, emitting opticalradiation when excited by an electric current. Theterm LED is correct only for visible radiation,because light is defined as visible radiation (seeRadiation and Light). For infrared emitting diodesthe term IRED is the correct term. Nevertheless itis common but not correct to use "LED" also forIREDs.
Le; L Radiance (in a given direction, at a given point ofa real or imaginary surface). Quantity defined by the formula
,
where dΦe is the radiant flux transmitted by anelementary beam passing through the given pointand propagating in the solid angle dΩ containingthe given direction; dA is the area of a section ofthat beam containing the given point; θ is the anglebetween the normal to that section and thedirection of the beam, unit: W ⋅ m-2 ⋅ sr -1
lm Lumen, unit for luminous fluxlx Lux, unit for illuminance m Meter, SI unit of lengthMe; M Radiant exitance (at a point of a surface) -
Quotient of the radiant flux dΦe leaving an elementof the surface containing the point, by the area dAof that element. Equivalent definition. Integral,taken over the hemisphere visible from the givenpoint, of the expression Le ⋅ cosθ ⋅ dΩ, where Le isthe radiance at the given point in the variousdirections of the emitted elementary beams ofsolid angle dΩ, and θ is the angle between any ofthese beams and the normal to the surface at thegiven point.
unit: W ⋅ m-2
MIR Medium speed IR, as SIR, with the data rate576 kbit/s to 1152 kbit/s
Mode Electrical input or output port of a transceiverdevice to set the receiver bandwidth
N.A. Numerical Aperture, N.A. = sin α/2Term used for the characteristic of sensitivity orintensity angles of fiber optics and objectives
NEP Noise equivalent powerPtot Total power dissipationPv Power dissipation, general
Radiation and LightVisible radiation, any optical radiation capable ofcausing a visual sensation directly.Note: There are no precise limits for the spectralrange of visible radiation since they depend uponthe amount of radiant power reaching the retinaand the responsivity of the observer. The lower limitis generally taken between 360 nm and 400 nmand the upper limit between 760 nm and 830 nm.
Radiation and Light Optical radiation, electromagnetic radiation atwavelengths between the region of transition toX-rays (λ = 1 nm) and the region of transition toradio waves (λ = 1 mm)
Radiation and Light IRInfrared radiation, optical radiation for which thewavelengths are longer than those for visibleradiation.Note: For infrared radiation, the range between780 nm and 1 mm is commonly sub-divided into:IR-A 780 nm to 1400 nmIR-B 1.4 µm to 3 µmIR-C 3 µm to 1 mm
RD Dark resistanceRF Feedback resistorRi Internal resistanceRis Isolation resistanceRL Load resistanceRS Serial resistanceRsh Shunt resistance, the shunt resistance of a
detector diode is the dynamic resistance of thediode at zero bias. Typically it is measured at avoltage of 10 mV forward or reverse, orpeak-to-peak
RthJA Thermal resistance, junction to ambientRthJC Thermal resistance, junction to caseRXD Electrical data output port of a transceiver device
s Second, SI-unit of time 1 h = 60 min = 3600 s
S Absolute sensitivity Ratio of the output value Y of a radiant-sensitivedevice to the input value X of a physical quantity:S = Y/X, units: e.g. A/lx, A/W, A/(W/m2)
s(λp) Spectral sensitivity at a wavelength λp
LedΦv
dA θcos dΩ⋅ ⋅----------------------------------------------------------=
Me
dΦe
dA----------- Le θcos d⋅ ⋅ Ω
2πsr∫= =
Symbols and TerminologySymbols and Terminology Vishay Semiconductors
Document Number: 81252 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 18-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 545
s(λ) Absolute spectral sensitivity at a wavelength λ,the ratio of the output quantity y to the radiant inputquantity x in the range of wavelengthsλ to λ + Δλ s(λ) = dy(λ)/dx(λ) E.g., the radiant power Φe(λ) at a specifiedwavelength λ falls on the radiationsensitive area ofa detector and generates a photocurrent Iph ⋅ s(λ)is the ratio between the generated photocurrentIph and the radiant power Φe(λ) which falls on thedetector. s(λ) = Iph / Φe(λ), unit: A/W
s(λ)rel Spectral sensitivity, relative, ratio of the spectralsensitivity s(λ) at any considered wavelength tothe spectral sensitivity s(λ0) at a certainwavelength λ0 taken as a reference s(λ)rel = s(λ)/s(λ0)
s(λ0) Spectral sensitivity at a reference wavelength λ0
SC Electrical input port of a transceiver device to setthe receiver sensitivity
SD Electrical input port of a transceiver device to shutdown the transceiver
ShutdownMode of operation where a device is switched to asleep mode (shut down) by an external signal orafter a quiescent period keeping some functionsalive to be prepared for a fast transition tooperating mode. Might be in some cases identicalwith “standby”
SIR Serial Infrared, term used by IrDA® to describeinfrared data transmission up to and including115.2 kbit/s. SIR IrDA® data communicationcovers 2.4 kbit/s to 115.2 kbit/s, equivalent to thebasic serial infrared standard introduced with thephysical layer version IrPhy version 1.0
Split power supplyTerm for using separated power supplies fordifferent functions in transceivers. Receivercircuits need well-controlled supply voltages. IREDdrivers do not need a controlled supply voltage butneed much higher currents. Therefore it safes costnot to control the IRED current supply and have aseparated supply. For that some modified designrules have to be taken into account for designingthe ASIC. This is used in nearly all Vishaytransceivers and is described in US-Patentno. 6,157,476
sr Steradian (sr), SI unit of solid angle Ω. Solid anglethat, having its vertex at the centre of a sphere,cuts off an area of the surface of the sphere equalto that of a square with sides of length equal to theradius of the sphere. (ISO, 31/1-2.1, 1978) Example: The unity solid angle, in terms ofgeometry, is the angle subtended at the center ofa sphere by an area on its surface numericallyequal to the square of the radius (see figuresbelow). Other than the figures might suggest, the
shape of the area does not matter at all. Any shapeon the surface of the sphere that holds the samearea will define a solid angle of the same size. Theunit of the solid angle is the steradian (sr).Mathematically, the solid angle is dimensionless,but for practical reasons, the steradian isassigned.
Standby Mode of operation where a device is prepared tobe quickly switched into an idle or operating modeby an external signal.
T Period of time (duration)T Temperature, 0 K = - 273.15 °C, unit: K (Kelvin)t Temperature, °C (degree Celsius). Instead of t
sometimes T is used not to mix up temperature Twith time t
t TimeTamb Ambient temperature, if self-heating is
significant: temperature of the surrounding airbelow the device, under conditions of thermalequilibrium. If self-heating is insignificant: airtemperature in the surroundings of the device
Tamb Ambient temperature range, as an absolutemaximum rating: the maximum permissibleambient temperature range
TC Temperature coefficient, the ratio of the relativechange of an electrical quantity to the change intemperature (ΔT) which causes it under otherwiseconstant operating conditions
TC Colour temperature (BE), the temperature of aPlanckian radiator whose radiation has the samechromaticity as that of a given stimulus, unit: K Note: The reciprocal colour temperature is alsoused, unit K-1 (BE).
Tcase Case temperature, the temperature measured ata specified point on the case of a semiconductordevice. Unless otherwise stated, this temperatureis given as the temperature of the mounting basefor devices with metal can
td Delay timetf Fall time, the time interval between the upper
specified value and the lower specified value onthe trailing edge of the pulse. Note: It is common to use a 90 % value of thesignal for the upper specified value and a 10 %value for the lower specified value.
Tj Junction temperature, the spatial mean value ofthe temperature during operation. In the case ofphototransistors, it is mainly the temperature of thecollector junction because its inherent temperatureis the maximum.
toff Turn-off time, the time interval between the upperspecified value on the trailing edge of the appliedinput pulse and the lower specified value an thetrailing edge of the output pulse. toff = td(off) + tf
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 81252546 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 18-Aug-08
Symbols and TerminologyVishay Semiconductors Symbols and Terminology
ton Turn-on time, the time interval between the lowerspecified value on the trailing edge of the appliedinput pulse and the upper specified value an thetrailing edge of the output pulse. ton = td(on) + tf
tp Pulse duration, the time interval between thespecified value on the leading edge of the pulseand the specified value an the trailing edge of theoutput pulse. Note: In most cases the specified value is 50 % ofthe signal
tpi Input pulse durationtpo Output pulse durationtr Rise time, the time interval between the lower
specified value and the upper specified value onthe trailing edge of the pulse. Note: It is common to use a 90 % value of thesignal for the upper specified value and a 10 %value for the lower specified value ts storage time
ts Storage timeTsd Soldering temperature, maximum allowable
temperature for soldering with a specified distancefrom the case and its duration
Tstg Storage temperature range, the temperaturerange at which the device may be stored ortransported without any applied voltage
TXD Electrical data input port of a transceiver device
V Volt
V(λ) Standard luminous efficiency function forphotopic vision (relative human eye sensitivity)
V(λ) , V'(λ)Spectral luminous efficiency (of amonochromatic radiation of wavelength λ); V(λ) forphotopic vision; V'(λ) for scotopic vision). Ratio of the radiant flux at wavelength λm to that atwavelength λ such that both radiations produceequally intense luminous sensations underspecified photometric conditions and λm is chosenso that the maximum value of this ratio is equal to 1
VBEO Base emitter voltage, open collectorV(BR) Breakdown voltage, reverse voltage at which a
small increase in voltage results in a sharp rise ofreverse current. It is given in technical data sheetsfor a specified current
V(BR) CEO Collector emitter breakdown voltage,open base
V(BR)EBO Emitter base breakdown voltage, opencollector
V(BR)ECO Emitter collector breakdown voltage, openbase
VCBO Collector-base voltage, open emitter, generally,reverse biasing is carried out by applying a voltageto any of two terminals of a transistor in such a waythat one of the junctions operates in reversedirection, whereas the third terminal (secondjunction) is specified separately.
VCC Supply voltage (positive)VCE Collector emitter voltageVCEO Collector emitter voltage, open base (IB = 0)VCEsat Collector emitter saturation voltage, the
saturation voltage is the DC voltage betweencollector and emitter for specified (saturation)conditions, i.e., IC and EV (Ee or IB), whereas theoperating point is within the saturation region.
Vdd Supply voltage (positive)VEBO Emitter base voltage, open collectorVECO Emitter collector voltage, open baseVF Forward voltage, the voltage across the diode
terminals which results from the flow of current inthe forward direction
VFIR As SIR, data rate 16 Mbit/s
Vlogic Reference voltage for digital data communicationports
Vno Signal-to-noise ratio
VO Output voltageΔVΟ Output voltage change (differential output voltage)VOC Open circuit voltage, the voltage measured
between the photovoltaic cell or photodiodeterminals at a specified irradiance/illuminance(high impedance voltmeter!)
VOH Output voltage highVOL Output voltage lowVph Photovoltage, the voltage generated between the
photovoltaic cell or photodiode terminals due toirradiation/ illumination
VR Reverse voltage (of a junction), applied voltagesuch that the current flows in the reverse direction
VR Reverse (breakdown) voltage, the voltage dropwhich results from the flow of a defined reversecurrent
VS Supply voltageVss (Most negative) supply voltage (in most cases:
ground)± ϕ1/2 Angle of half transmission distanceη Quantum efficiencyθ1/2; ± ϕ = α/2
Half-intensity angle, in a radiation diagram, theangle within which the radiant (or luminous)intensity is greater than or equal to half of themaximum intensity.Note: IEC 60747-5-1 is using θ1/2. In Vishaydatasheets mostly ± ϕ = α/2 is used
θ1/2; ± ϕ = α/2 Half-sensitivity angle, in a sensitivity diagram,the angle within which the sensitivity is greaterthan or equal to half of the maximum sensitivity. Note: IEC 60747-5-1 is using θ1/2. In Vishaydatasheets mostly ± ϕ = α/2 is used
Symbols and TerminologySymbols and Terminology Vishay Semiconductors
Document Number: 81252 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 18-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 547
Ω Solid angle, see sr, steradian forIEC 60050(845)-definition. The space enclosed byrays, which emerge from a single point and lead toall the points of a closed curve. If it is assumed thatthe apex of the cone formed in this way is thecenter of a sphere with radius r and that the coneintersects with the surface of the sphere, then thesize of the surface area (A) of the spheresubtending the cone is a measure of the solidangle Ω. Ω = A/r2. The full sphere is equivalent to4πsr. A cone with an angle of α/2 forms a solidangle of Ω = 2 π(1 - cos α/2) = 4 π sin2 α/4, unit: sr
λm Wavelength of the maximum of the spectralluminous efficiency function V(λ)
Δλ Range of spectral bandwidth (50 %), the rangeof wavelengths where the spectral sensitivity orspectral emission remains within 50 % of themaximum value
Φe; Φ; PRadiant flux; radiant power, power emitted,transmitted or received in the form of radiation.unit: W, W = Watt
Φv; Φ; Luminous flux, quantity derived from radiant fluxΦe by evaluating the radiation according to itsaction upon the CIE standard photometric
observer. For photopic vision
,
where is the spectral distribution of the
radiant flux and V(λ) is the spectral luminousefficiency, unit : lm, lm: lumen, Km = 683 lm/W:Note: For the values of Km (photopic vision) andK'm (scotopic vision), see IEC 60050 (845-01-56).
λ Wavelength, generalλc Centroid wavelength, centroid wavelength λc of a
spectral distribution, which is calculated as "centreof gravity wavelength" according to
λD Dominant wavelengthλp Wavelength of peak sensitivity or peak emission
Fig. 1
Φv Km
dΦeλdλ
-------------- V(λ )dλ⋅0∞
∫=
dΦeλdλ
--------------
λc λλ1
λ2
∫ Sx(λ )dλ⋅ Sxλ1
λ2
∫ (λ )dλ⋅⁄=
= 6 5.5°
= 2 0.5°
= 6.5°
= 1.0 sr
= 0.1 sr= 0 .01 sr
= 4 π sr
= 2 ar c c os (1 -/2π)
94 8584
Ω
α
Ω
ΩΩ
α
α
α
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 81252548 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 18-Aug-08
Symbols and TerminologyVishay Semiconductors Symbols and Terminology
DEFINITIONS
Databook Nomenclature
The nomenclature, symbols, abbreviations and terms insidethe Vishay Semiconductors data book is based on ISO andIEC standards.
The special optoelectronic terms and definitions are referringto the IEC Multilingual Dictionary (Electricity, Electronics andTelecommunications), Fourth edition (2001-01), IEC 50(Now: IEC 60050). The references are taken from the currenteditions of IEC 60050 (845), IEC 60747-5-1 andIEC 60747-5-2. Measurement conditions are based on IECand other international standards and especially guided byIEC 60747-5-3.Editorial notes: Due to typographical limitations variablescannot be printed in an italics format, which is usuallymandatory. Our booklet in general is using Americanspelling. International standards are written in UK English.Definitions are copied without changes from the original text.Therefore these may contain British spelling.
Radiant and Luminous Quantities and Their UnitsThese two kinds of quantities have the same basic symbols,identified respectively, where necessary, by the subscripte (energy) or v (visual), e.g. Φe, Φv. See note.Note: Photopic and scotopic quantities. Luminous(photometric) quantities are of two kinds, those used forphotopic vision and those used for scotopic vision. Thewording of the definitions in the two cases being almostidentical, a single definition is generally sufficient with theappropriate adjective, photopic or scotopic added wherenecessary.The symbols for scotopic quantities are prime (Φ'v, I'v, etc),but the units are the same in both cases.In general, optical radiation is measured in radiometric units.Luminous (photometric) units are used when opticalradiation is weighted by the sensitivity of the human eye,correctly spoken, by the CIE standard photometric observer
(Ideal observer having a relative spectral responsivity curvethat conforms to the V(λ) function for photopic vision or to the V'(λ) function for scotopic vision, and that complies with thesummation law implied in the definition of luminous flux).Note: With a given spectral distribution of a radiometricquantity the equivalent photometric quantity can beevaluated. However, from photometric units without knowingthe radiometric spectral distribution in general one cannotrecover the radiometric quantities.
Radiometric Terms, Quantities and UnitsThe radiometric terms are used to describe the quantities ofoptical radiation.The relevant radiometric units are:
Photometric Terms, Quantities and UnitsThe photometric terms are used to describe the quantities ofoptical radiation in the wavelength range of visible radiation(generally assumed as the range from 380 nm to 780 nm).The relevant photometric terms are:
Photometric units are derived from the radiometric units byweighting them with a wavelength dependent standardizedhuman eye sensitivity V(λ) - function, the so-calledCIE-standard photometric observer. There are differentfunctions for photopic vision (V(λ)) and scotopic vision (V'(λ) ).
In the following is shown, how the luminous flux is derivedfrom the radiant power and its spectral distribution. Theequivalent other photometric terms can be derived from theradiometric terms in the same way.
TABLE 1 - RADIOMETRIC QUANTITIES AND UNITS
RADIOMETRIC TERM
SYMBOL UNIT REFERENCE
Radiant power,radiant flux Φe W IEC 50
(845-01-24)
Radiant intensity Ie W/sr IEC 50 (845-01-30)
Irradiance Ee W/m2 IEC 50 (845-01-37)
Radiant exitance Me W/m2 IEC 50 (845-01-47)
Radiance Le W/(sr ⋅ m2) IEC 50 (845-01-34)
TABLE 2 - PHOTOMETRIC QUANTITIES AND UNITS
PHOTOMETRIC TERMEQUIVALENT
RADIOMETRIC TERMSYMBOL UNIT REFERENCE
Luminous power or
luminous flux
Radiant power or
radiant flux Φe
Φv lmΦv: IEC 50 (845-01-25)
lm: IEC 50 (845-01-51)
Luminous intensity Radiant intensity Ie Iv lm/sr = cd Iv: IEC 50 (845-01-31) cd: IEC 50 (845-01-50)
Illuminance Irradiance Ee Ev lm/m2 = lx (lux) Ev: IEC 50 (845-01-38) lx: IEC 50 (845-01-52)
Luminous exitance Radiant exitance Me Mv lm/m2 IEC 50 (845-01-48)
Luminance Radiance Le Lv cd/m2 IEC 50 (845-01-35)
Symbols and TerminologySymbols and Terminology Vishay Semiconductors
Document Number: 81252 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 18-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 549
Relation between distance r, irradiance (illuminance) Ee(EV) and intensity Ie (IV)The relation between intensity of a source and the resultingirradiance in the distance r is given by the basic square rootrule law.An emitted intensity Ie generates in a distance r theirradiance Ee = Ie/r2.This relationship is not valid under near field conditions andshould be used not below a distance d smaller than 5 timesthe emitter source diameter.
Fig. 2
Using a single radiation point source, one gets the followingrelation between the parameter Ee, Φe, r:
use
, and get
Examples
1.Calculate the irradiance with given intensity and distance r:Transceivers with specified intensity of Ie = 100 mW/sr willgenerate in a distance of 1m an irradiance ofEe = 100/12 = 100 mW/m2. In a distance of 10 m theirradiance would be Ee = 100/102 = 1 mW/m2.
2.Calculate the range of a system with given intensity andirradiance threshold. When the receiver is specified with asensitivity threshold irradiance Ee = 20 mW/m2, thetransmitter with an intensity Ie = 120 mW/sr the resultingrange can be calculated as
1 m
2 m
3 m 18145
9 m2
4 m2
1 m2
Ee
dΦe
dA----------- W
m2-------=
IedΦdΩ--------= Ω A
r2----=
Ee
dΦe
dA----------- Ie
dΩdA--------
Ie
r2---- W
m2-------= = =
rIeEe------ 120
20---------- 6 2.45 m= = = =
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
I n f r a re d E m i t t e r s
P I N P h o t o D i o d e s
P h o t o t r a n s i s t o r s
R e f l e c t i v e S e n s o r s
Tr a n s m i s s i v e S e n s o r s
A m b i e n t L i g h t S e n s o r s
I n t e g r a t e d P ro x i m i t y a n d A m b i e n t L i g h t S e n s o r
RESOURCES• Optical sensors product portfolio http://www.vishay.com/optical-sensors/
• Infrared emitters product portfolio http://www.vishay.com/ir-emitting-diodes/
• Photo detectors product portfolio http://www.vishay.com/photo-detectors/
• Optoelecronics complete product portfolio http://www.vishay.com/optoelectronics/
• Technical support:
– emittertechsupport@vishay.com
– sensorstechsupport@vishay.com
– detectortechsupport@vishay.com
• Sales contacts: http://www.vishay.com/doc?99914
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
VMN-SG2123-12031/8SELECTOR GUIDE
Discrete Semiconductors and Passive ComponentsOne of the World’s Largest Manufacturers of
Infrared Emitters, PhotoDetectors, and Optical Sensors
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
Infrared EmittersVishay offers emitters in more wavelengths than any other supplier: 830 nm, 850 nm, 870 nm, 890 nm, 940 nm, and 950 nm. Providing fast rise and fall response times, Vishay also has the broadest selection of double hetero infrared emitters. They are the highest-power infrared emitters with the lowest forward voltages on the market and ideal for high-current applications. The latest surface emitter technology based devices, which provide highest radiant intensities, round up our extensive IR emitter portfolio.
1.65
2.8
3.0
PLCC-2
5.0
5.0
2.65
Side View Lens
2.4
2.9
3.3
1.8 mm
2.2
3.6
3.4
Side View Micro
6.13.0
3 mm
5.2 - 6.54.69
TO-18
5.0
8.65 mm
1.8 mm Surface-Mount
5.8
2.2
2.77
Package Part NumberPeak
Wavelength (nm)
Angle of Half Intensity
(+/-°)
Radiant Intensity,
Ie (mW/sr) (1)
Rise and Fall Time, tr/tfn (ns)
Remark
Through-Hole Packages
5 mm
TSAL5100 940 10 130 800 Stand-off
TSAL5300 940 22 45 800 Stand-off
TSAL6100 940 10 130 800 No stand-off
TSAL6200 940 17 60 800 No stand-off
TSAL6400 940 25 40 800 No stand-off
TSAL7200 940 17 60 800 No stand-off
TSAL7300 940 22 45 800 No stand-off
TSAL7400 940 25 40 800 No stand-off
TSAL7600 940 30 25 800 No stand-off
TSFF5210 870 10 180 15 Stand-off
TSFF5410 870 22 70 15 Stand-off
TSFF5510 870 38 32 15 Stand-off
TSFF6210 870 10 180 15 No stand-off
TSFF6410 870 22 70 15 No stand-off
TSHA5203 875 12 65 600 Stand-off
TSHA5500 875 24 30 600 Stand-off
TSHA6203 875 12 65 600 No stand-off
TSHA6500 875 24 30 600 No stand-off
TSHF5210 890 10 180 30 Stand-off
TSHF5410 890 22 70 30 Stand-off
TSHF6210 890 10 180 30 No stand-off
TSHF6410 890 22 70 30 No stand-off
TSHG5210 850 10 230 20 Stand-off
TSHG5410 850 18 90 20 Stand-off
TSHG5510 830 38 32 15 Stand-off
TSHG6200 850 10 180 20 No stand-off
TSHG6210 850 10 230 20 No stand-off
TSHG6400 850 22 70 20 No stand-off
TSHG6410 850 18 90 20 No stand-off
TSHG8200 830 10 180 20 No stand-off
TSHG8400 830 22 70 20 No stand-off
TSUS5202 950 15 30 800 Stand-off
TSUS5402 950 22 20 800 Stand-off
VSLY5850 850 3 600 10 Stand-off
3 mm
TSAL4400 940 25 30 800 No stand-off
TSHA4400 875 20 20 600 No stand-off
TSUS3400 950 18 15 800 Stand-off
TSHF4410 890 22 40 30 No stand-off
TSUS4300 950 16 18 800 No stand-off
TSUS4400 950 18 15 800 No stand-off
VSLB3940 940 22 65 15 No stand-off
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12032/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
2.4
2.9
3.3
1.8 mm
2.2
3.6
3.4
Side View Micro
6.13.0
3 mm
0805
0.85
2.0 1.25
1.65
2.8
3.0
PLCC-2
5.2 - 6.54.69
TO-18
5.0
8.65 mm
1.8 mm Surface-Mount
5.8
2.2
2.77
0.4 0.2 014329
0.6
0.9
0.8
0°30°
10° 20°
40°
50°
60°
70°
80°0.7
1.0
I- R
elat
ive
Rad
iant
Inte
nsity
ere
l ϕ -
Angu
lar D
ispl
acem
ent
Package Part NumberPeak
Wavelength (nm)
Angle of Half Intensity
(+/-°)
Radiant Intensity,
Ie (mW/sr) (1)
Rise and Fall Time, tr/tfn (ns)
Remark
Through-Hole Packages
1.8 mmCQY36N 950 55 1.50 800 No stand-off
CQY37N 950 12 5 800 No stand-off
Side View Micro
TSSS2600 950 25H, 65V 2.6 800 No stand-off
Side View Lens
TSKS5400S 950 30 4.5 800 No stand-off
TO-18
TSTA7100 875 5 50 600 No stand-off
TSTA7300 875 12 20 600 No stand-off
TSTA7500 875 30 6 600 No stand-off
TSTS7100 950 5 18 800 No stand-off
TSTS7300 950 12 6 800 No stand-off
TSTS7500 950 30 1.6 800 No stand-off
Surface-Mount Packages
PLCC-2
VSMB3940X01(2) 940 60 13 15
VSMF3710 890 60 10 30
VSMF4710 870 60 10 15
VSMF4720 870 60 16 15
VSMG2700 830 60 10 20
VSMG2720 830 60 14 20
VSMG3700 850 60 10 20
VSML3710 940 60 6 800
VSMS3700 950 60 4.5 800
VSMY3850 850 60 17 10
1.8 mm
VSMB2000X01(2) 940 12 40 15 Reverse gullwing
VSMB2020X01(2) 940 12 40 15 Gullwing
VSMY2850RG 850 10 100 10 Reverse gullwing
VSMY2850G 850 10 100 10 Gullwing
0805VSMB1940X01(2) 940 60 6 15
VSMY1850 850 60 12 10
Little Star®VSMY7850X01(3) 850 60 170 (3) 18
VSMY7852X01(4) 850 60 42 (4) 10
(1) If = 100 mA (2) Products ending in “X01” are AEC Q101 qualified (3) If = 1 A (4) If = 250 mA
Stand-OffTo control the height of the emitter when inserted into the PCB for soldering, some leaded emitters and photo detectors are also available with a standoff option (shown at left). The stand off is the tab on the leads. It is sometimes called a stopper.
Angle of Half Intensity, j0.5 or qIn a radiation diagram, the angle within which the radiant intensity is greater than or equal to half of the maximum intensity. In Vishay datasheets, the symbol j0.5 is most commonly used for the angle of half intensity. For visible LEDs this is sometime called the viewing angle. There is still light, be it infrared or visible, outside of this angle.
5.0
5.0
2.65
Side View Lens
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12033/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
Package Part Number
Pea
k W
ave
leng
th (n
m)
Ban
dw
idth
l 0.5
(nm
)
Sen
siti
vity
I ra (
µA)(1
)
Ang
le
of
Hal
f S
ensi
tivi
ty
(+/-
°)
Pho
to
Are
a (m
m)
Ris
e/Fa
ll T
ime,
t r/
t f (n
s)(2
)
Remark
Through-Hole Packages
3mmTEFD4300 950 350 to 1120 17 20 0.23 100
TEFD4300F 950 770 to 1070 17 20 0.23 100
5 mmBPV10 920 380 to 1140(7) 70 20 0.78 2,5(3) Stand-off
BPV10NF 940 790 to 1050 60 20 0.78 2,5(3) Stand-off
Side View
BPW41N 950 870 to 1050 45 65 7.5 100 5 x 4 x 6,8
BPW46 (L) 900 430 to 1100(7) 50 65 7.5 100 5 x 3 x 6,4
BPW82 950 790 to 1050 45 65 7.5 100 5 x 4 x 6,8
BPW83 950 790 to 1050 45 65 7.5 100 5 x 3 x 6,4
Side View High
Perfor- mance
BPV22F 950 870 to 1050 80 60 7.5 100
BPV22NF 940 790 to 1050 85 60 7.5 100
BPV23F 950 870 to 1050 63 60 4.4 70
BPV23NF 940 790 to 1050 65 60 4.4 70
TO-5 BPW20RF 920 400 to 1100(7) 42 50 7.5 3600(6)
TO-18 BPW24R 900 430 to 1100(7) 60 12 0.78 7(4)(5)
Top View Leaded
BP104 950 870 to 1050 45 65 7.5 100
BPW34 900 430 to 1100(7) 55 65 7.5 100
Surface-Mount Packages
Top View
TEMD5080X01(8) 940 350 to 1100(7) 60 65 7.5 40(4) AEC-Q101
TEMD5020X01(8) 940 430 to 1100(7) 35 65 4.4 100 AEC-Q101
TEMD5120X01(8) 940 790 to 1050 35 65 4.4 100 AEC-Q101
TEMD5010X01(8) 940 430 to 1100(7) 55 65 7.5 100 AEC-Q101
TEMD5110X01(8) 940 790 to 1050 55 65 7.5 100 AEC-Q101
VBP104S 940 430 to 1100(7) 35 65 4.4 100 Gullwing
VBP104SR 940 430 to 1100(7) 35 65 4.4 100 Reverse gullwing
VBP104FAS 950 780 to 1050 35 65 4.4 100 Gullwing
VBP104FASR 950 780 to 1050 35 65 4.4 100 Reverse gullwing
VBPW34S 940 430 to 1100(7) 55 65 7.5 100 Gullwing
VBPW34SR 940 430 to 1100(7) 55 65 7.5 100 Reverse gullwing
VBPW34FAS 950 780 to 1050 55 65 7.5 100 Gullwing
VBPW34FASR 950 780 to 1050 55 65 7.5 100 Reverse gullwing
1.8 mm
VEMD2000X01 940 750 to 1050 12 15 0.23 100 Reverse gullwing
VEMD2020X01(8) 940 750 to 1050 12 15 0.23 100 Gullwing
VEMD2500X01(8) 900 350 to 1120(7) 12 15 0.23 100 Reverse gullwing
VEMD2520X01(8) 900 350 to 1120(7) 12 15 0.23 100 Gullwing
0805TEMD7000X01(8) 900 350 to 1120(7) 3 60 0.23 100
TEMD7100X01(8) 950 750 to 1050 3 60 0.23 100
Notes: (1) Sensitivity: VR = 5 V, Ee = 1 mW/cm2, l = 950 nm; (2) Speed: RL = 1 kΩ, l = 820 nm, VR = 10 V, (3) VR = 50 V, RL = 50 Ω, l = 820 nm; (4) RL = 50 Ω; (5) VR = 20 V; (6) VR = 0V (7) Bandwidth l0.1 (nm) (8) Products ending in “X01” are AEC-Q101 qualified
PIN Photo DiodesVishay has the broadest portfolio of PIN photodiodes on the market. With lower capacitance, they provide high-speed response, low noise and low dark current along with excellent sensitivity. They are ideal for high-speed data transfer, light barriers, alarm systems, and linear light measurement.
Rise and Fall Time: Switching times of photo detectors are strongly dependent on the measurement conditions. Shown in the diagrams are two major conditions: the reverse bias and the value of the load resistor used in the circuit. The switching time of a photo diode varies by two orders of magnitude when the load resistor value changes from 50 Ω to 10 kΩ. The lower the value of the load resistor, the faster the diode becomes. Also, the higher the reverse bias, the faster the switching times.
5.2 - 6.54.69
TO-18
5.0
8.65 mm
8.13 3.1
TO-5
5.8
2.2
2.77
8.6
1.8 mm Surface-Mount
4.5
6.0
3.2
Side View,
High Performance
5.0
6.4
3.0
Side View
4.65
4.3
2.0
Top View,
Through
Hole
0805
0.85
2.0 1.25
4.0 5.0
1.1
Top View, Surface-Mount
0
2
4
6
8
12
Rev
erse
Bia
s (V
)
94 8616
10
104 106105 108107
RL =
50 Ω
100 kΩ
10 kΩ
1 kΩ
- 3 dB - Bandwidth (Hz)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12034/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
PackagePart
Number
Peak Wave- length (nm)
Bandwidth l0.5
(nm)
Collector Light
Current, Ica (mA)(1)
Angle of Half
Sensitvity (+/-° )
Rise and Fall
Time, tr/tf (µs)(2)
Remark
Through-Hole Packages
5 mm
BPV11 850 450 to 1080(3) 10 15 6 With base pin
BPV11F 930 900 to 980 9 15 6 With base pin
BPW96C 850 450 to 1080(3) 8 20 2 Stand-off
3 mmBPW85C 850 450 to 1080(3) 5 25 2 Stand-off
TEFT4300 925 875 to 1000 3.2 30 2 No stand-off
1.8 mmBPW16N 825 450 to 1040(3) 0.14 40 4.8
BPW17N 825 450 to 1040(3) 1 12 4.8
Side View Micro TEST2600 920 850 to 980 2.5 30H, 60V 6
Side View Lens TEKT5400S 920 850 to 980 4 37 6
TO-18BPW76B 850 450 to 1080(3) 1.2 40 6
BPW77NB 850 450 to 1080(3) 20 10 6
Surface-Mount Packages
PLCC-2
VEMT3700 850 450 to 1080(3) 0.5 60 2
VEMT3700F 940 850 to 1050 0.5 60 2
VEMT4700 850 450 to 1080(3) 0.5 60 2 With base pin
1.8 mm
VEMT2000X01(4) 860 790 to 970 6 15 2 Reverse gullwing
VEMT2020X01(4) 860 790 to 970 6 15 2 Gullwing
VEMT2500X01(4) 850 470 to 1090(3) 6 15 2 Reverse gullwing
VEMT2520X01(4) 850 470 to 1090(3) 6 15 2 Gullwing
0805TEMT7000X01(4) 850 470 to 1090(3) 0.45 60 2
TEMT7100X01(4) 870 750 to 1010 0.45 60 2
Notes: (1) Collector light current: VCE = 5 V, Ee = 1 mW/cm2, l = 950 nm, typical (2) Speed: VS = 5 V, IC = 5 mA, RL = 100 Ω (3) Bandwidth l0.1 (nm) (4) Products ending in “X01” are AEC-Q101 qualified
Bandwidth: l0.5 and l0.1
The diagram to the left shows the relative spectral sensitivity of the BPV11 phototransistor. The peak sensitivity is found at 850 nm. The bandwidth of the detector can be defined by using a relative sensitivity value of 0.5 or 0.1. Vishay datasheets will show one of these values. In the case of the BPV11, the bandwidth in the datasheet is 450 nm to 1080 nm, l0.1.
400 600 10000
0.2
0.4
0.6
0.8
1.0
S (λ)
rel -
Rel
ativ
e S
pect
ral S
ensi
tivity
λ - Wavelength (nm)94 8348
800
PhototransistorsVishay provides the industry’s widest selection of phototransistors. Offered in over 10 different packages, Vishay’s phototransistors are exceptionally sensitive and simplify circuit design by eliminating the need for a separate amplifier.
5.0
5.0
2.65
Side View Lens
2.4
2.9
3.3
1.8 mm
2.2
3.6
3.4
Side View Micro
6.13.0
3 mm
0805
0.85
2.0 1.25
5.0
8.65 mm
5.8
2.2
2.77
8.6
1.8 mm Surface-Mount
1.65
2.8
3.0
PLCC-2
5.2 - 6.54.69
TO-18
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12035/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
Reflective SensorsReflective sensors incorporate an infrared emitter and photo detector adjacent to each other. When an object is in the sensing area, the emitted light is reflected back towards the photo detector, and the amount of light energy reaching the detector increases. This change in light energy or photo current is used as an input signal in the application.
Transmissive Sensors Transmissive sensors, also called interrupter sensors, incorporate an infrared emitter and photo detector that face each other. When an object is located between the emitter and detector in the sensing path, it interrupts or breaks the optical beam of the emitter. A change in light energy reaching the detector results in a change in photo current which is used as an input to the application.
Part Number(1) Operating Range(2) (mm)
Peak Operating Distance (mm)
TCND5000(3) 2 to 25 7
TCNT2000* 1 to 5 1
TCRT1000/1010 1 to 2 1
TCRT5000(L) 1 to 14 2.5
CNY70 1 to 3 0
5.5
4.0
4.03.0
TCPT1300X01
2.8
9.2
4.8
5.4
TCST1230
5.5
4.0
4.03.0
TCUT1300X013.0
8.3
4.7
8.1
TCST1030, L
10.8
6.3
11.9
3.1
TCST1x0x
9.5
14.3
6.0
2.7
TCST5250
24.56.3
3.110.8
TCST2x0x
Notes: (1) All optical sensors have phototransistor output except where noted. (2) Relative collector current > 20 % (3) TCND5000 has a PIN photodiode output ( * ) Target specification, product release pending
Part Number(1) Gap (mm)
Aperture (mm)
Typical Output Current
(mA)
On / Off Time
ton / toff (µs)
TCPT1300X01(3) 3.0 0.3 0.6 20 / 30
TCUT1300X01(2) (3) 3.0 0.3 0.6 20 / 30
TCST1030 3.0 none 2.4 15 / 10
TCST1103 3.1 1 4 10 / 8
TCST1202 3.1 0.5 2 10 / 8
TCST1230 3 0.5 2.0 15 / 10
TCST1300 3.1 0.3 0.5 10 / 8
TCST2103 3.1 1.0 4.0 10 / 8
TCST2202 3.1 0.5 2.0 10 / 8
TCST2300 3.1 0.3 0.5 10 / 8
TCST5250 2.7 0.5 1.5 15 / 10
Notes: (1) All optical sensors have phototransistor output (2) Dual channel (3) Products ending in “X01” are AEC-Q101 qualified.
6.03.7
3.9
TCND5000
10.2
7.0
5.8
TCRT5000(L)
2.5
7.0
4.0
TCRT1010
7.0
7.0
6.0
CNY70
TCNT2000 TCRT1000
2.5
7.0
4.0
2.77 2.7
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12036/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
TEMD5510FX01 TEMT6200FX01
TEMD6200FX01
TEMD6010FX01
TEMT6000X01TEPT5600 TEPT4400 TEPT5700 BPW21R
Ambient Light SensorsAmbient light sensors are used to detect light or brightness in a manner similar to the human eye. They are most commonly found in industrial lighting, consumer electronics, and automotive systems, where they allow settings to be adjusted automatically in response to changing ambient light conditions. By turning on, turning off, or adjusting features, ambient light sensors can conserve battery power or provide extra safety while eliminating the need for manual adjustments.
Package Part Number
Peak Wave- length (nm)
Band- width l0.5
(nm)
Angle of Half
Sensitvity (+/-° )
Light Current(1)
Incandescent (µA)
Light Current(2)
Fluorescent (μA)
Remark
Photo Diodes
0805, SMD TEMD6200FX01(3) 540 430 to 610 60 0.04 0.03 Stand-off
1206, SMD TEMD6010FX01(3) 540 430 to 610 60 0.04 0.03
Top View SMD TEMD5510FX01(3) 540 430 to 610 65 1 0.7
TO-5, Leaded BPW21R 565 420 to 675 50 0.9 0.75
Phototransistors
0805, SMD TEMT6200FX01(3) 550 450 to 610 60 12 7
1206, SMD TEMT6000X01(3) 570 430 to 800 60 50 21
5 mm, flat top TEPT5700 570 430 to 800 50 75 31 Leaded
5 mm TEPT5600 570 430 to 800 20 350 145 Leaded
3 mm TEPT4400 570 430 to 800 30 200 83 Leaded
Notes: (1) Ev = 100 lux, VCE = 5 V, CIE illuminant A, typical (2) Ev = 100 lux, VCE = 5 V, e.g. Sylvania color abbrev. D830, typical (3) Products ending in “X01” are AEC-Q101 qualified
F Part numbers with an F contain an infrared filtering epoxy to further improve the ambient light sensing performance X01 Part numbers with an X01 are qualified to the AEC Q101 standard
and support operating temperatures from - 40 C° to + 100 °C
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12037/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Opt
oele
ctro
nics
- Em
itte
rs, D
etec
tors
, Opt
ical
Sen
sors
Emitters, Detectors, Sensors
Package Part Number
Operating Range (mm)
Operating Voltage
Range (V)
Sample Rate(1) (Hz)
LED Pulse
Current(1) (mA)
Ambient Light
Range (lx)
Ambient Light Reso-
lution (lx)
Interrupt
LLP, SMD 3.95 mm x 3.95 mm
x 0.75 (H) mm
VCNL40001 to 200 2.5V to 3.6V 1 to 500 10 to 200
0.25 to 16383
0.25No
VCNL4010 Yes
Notes: (1) Adjustable through I2C interface
Integrated Proximity and Ambient Light Sensor
VCNL4000
VCNL4010
The VCNL4000 and VCNL4020 are fully integrated proximity and ambient light sensors combining an infrared emitter, PIN photodiode, ambient light sensor and signal processing IC into a single package. They feature I2C interface and have the highest proximity resolution on the market. The VCNL4010 supports an interrupt function.
• Integrated emitter eliminates need for mechanical, cross-talk barriers - simplifies Window design
• Lowprofileof0.75mm-idealforsmartphoneanddigitalcameraapplications
• Proximitydistanceupto20cm
• I2C fast mode interface
• 16-bitdigitalresolutionforambientlightandproximitysignal
• Interruptfunction-VCNL4010
The VCNL4000 and VCNL4020 are fully integrated proximity and ambient light sensors combining an infrared emitter, PIN photodiode, ambient light sensor and signal processing IC into a single package. They feature I2C interface and have the highest proximity resolution on the market. The VCNL4010 supports an interrupt function.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-SG2123-12038/8SELECTOR GUIDE
OPTOELECTRONICS
INN
OVA
TI
ON AND TECHNO
LO
GY
1 9 6 2 - 2 0 1 2
V I S H AY I N T E R T E C H N O LO GY, I N C .
Assembly Instructions
Assembly InstructionsVishay Semiconductors
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008052 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 28-Aug-08
GENERALOptoelectronic semiconductor devices can be mounted inany position. Connection wires may be bent provided thebend is not less than 1.5 mm from bottom of case. Duringbending, no forces must be transmitted from pins to case(e.g., by spreading the pins).If the device is to be mounted near heat generatingcomponents, the resultant increase in ambient temperatureshould be taken into account.
SOLDERING INSTRUCTIONSProtection against overheating is essential when a device isbeing soldered. It is recommended, therefore, that theconnection wires be left in place as long as possible. Themaximum permissible device junction temperature should beexceeded for as little time as possible, and for no longer thanspecified in the solder profiles, during the soldering process.In case of plastic encapsulated devices, the maximumpermissible soldering temperature is governed by themaximum permissible heat that may be applied toencapsulants rather than by the maximum permissiblejunction temperature.Maximum soldering iron (or solder bath) temperatures aregiven in table 1. During soldering, no forces must betransmitted from pins to case (e.g., by spreading pins).
SOLDERING METHODSThere are several methods in use to solder devices onto thesubstrate. Some of them are listed in the following sections.
Vapor Phase Soldering
Soldering in saturated vapor is also known as condensationsoldering. This soldering process is used as a batch system(dual vapor system) or as a continuous single vapor system.Both systems may also include preheating of the assembliesto prevent high-temperature shock and other undesiredeffects.
Infrared soldering
With infrared (IR) reflow soldering the heating is contact-freeand the energy for heating the assembly is derived fromdirect infrared radiation and from convection (Refer toCECC00802).The heating rate in an IR furnace depends on the absorptioncoefficients of the material surfaces and on the ratio ofcomponent’s mass to its irradiated surface.The temperature of components in an IR furnace, with amixture of radiation and convection, cannot be determined inadvance. Temperature measurement may be performed bymeasuring the temperature of a certain component while it isbeing transported through furnace.The temperatures of small components, soldered togetherwith larger ones, may rise up to 280 °C.The following parameters influence the internal temperatureof a component:
- Time and power
- Mass of component
- Size of component
- Size of printed circuit board
- Absorption coefficient of surfaces
- Packaging density
- Wavelength spectrum of radiation source
- Ratio of radiated and convected energy
Temperature-time profiles of the entire process and theabove parameters are given in figures 1 and 2.
TABLE 1- MAXIMUM SOLDERING TEMPERATURESIRON SOLDERING WAVE SOLDERING
IRON TEMPERATURE
DISTANCE OF THE
SOLDERING POSITION FROM THE
LOWER EDGE OF THE CASE
MAXIMUM ALLOWABLE SOLDERING
TIME
SOLDERING TEMPERATURE
SEE TEMPERATURE TIME PROFILES
DISTANCE OF THE
SOLDERING POSITION FROM THE
LOWER EDGE OF THE CASE
MAXIMUM ALLOWABLE SOLDERING
TIME
Devices in metal case
≤ 245 °C ≥ 1.5 mm 5 s 245 °C ≥ 1.5 mm 5 s
≤ 245 °C ≥ 5.0 mm 10 s
≤ 350 °C ≥ 5.0 mm 5 s 300 °C ≥ 5.0 mm 3 s
Devices in plastic case > 3 mm
≤ 260 °C ≥ 2.0 mm 5 s 235 °C ≥ 2.0 mm 8 s
≤ 300 °C ≥ 5.0 mm 3 s 260 °C ≥ 2.0 mm 5 s
Devices in plastic case ≤ 3 mm ≤ 300 °C ≥ 5.0 mm 3 s 260 °C ≥ 2.0 mm 3 s
Assembly InstructionsAssembly Instructions Vishay Semiconductors
Document Number: 80080 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 28-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 53
Wave soldering
In wave soldering, one or more continuously replenishedwaves of molten solder are generated, while the substratesto be soldered are moved in one direction across the wave’screst.Temperature-time profiles of the entire process are given infigure 3.
Iron soldering
This process cannot be carried out in a controlled way.It should not be considered for use in applications wherereliability is important. There is no SMD classification for thisprocess.
Laser soldering
This is an excess heating soldering method. The energyabsorbed may heat device to a much higher temperaturethan desired. There is no SMD classification for this processat the moment.
Resistance soldering
This is a soldering method which uses temperaturecontrolled tools (thermodes) for making solder joints. Thereis no SMD classification for this process at the moment.
WARNINGSurface-mount devices are sensitive to moisture release ifthey are subjected to infrared reflow or a similar solderingprocess (e.g. wave soldering). After opening the bag, theymust be:
1.stored at ambient of < 20 % relative humidity (RH)
2.mounted within floor life specified on MSL sticker underfactory conditions of Tamb < 30 °C/RH < 60 %
Devices require baking before mounting if 1. or 2. is not metand the humidity indicator card is > 20 % at 23 ± 5 °C. Ifbaking is required, devices may be baked for 192 h at 40 °C+ 5 °C - 0 °C and < 5 % RH.
TEMPERATURE-TIME PROFILES
Fig. 1 - Lead (Pb)-free (Sn) Infrared Reflow Solder Profileacc. J-STD020D for Surface-Mount Components
Fig. 2 - Infrared Reflow SnPb Solder Profile for Surface-Mount Components like TEMx1xxx and TSMx1xxx
Fig. 3 - Double Wave Solder Profile for Leaded Components
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Tem
pera
ture
(°C
)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s max. ramp down 6 °C/s
19841
255 °C
60
80
100
120
140
160
180
200
220
240
260
0 20 40 60 80 100 120 140 160 180 200 220
Time (s)
Tem
pera
ture
(°C
)
17172
+ 5 °C/s
5 s60 s to 120 s
- 5 °C/s
2 K/s
secondwave
first wavewave
ca. 5 K/s
5 s
full line: typicaldotted line:process limits
Time (s)
Tem
pera
ture
(°C
)
300
250
200
150
100
50
00 50 100 150 200 250
948626
Lead temperature
235 °C to 260 °C
100 °C to 130 °C
ca. 200 K/s
forced cooling
ca. 2 K/s
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008054 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 28-Aug-08
Assembly InstructionsVishay Semiconductors Assembly Instructions
HEAT REMOVALTo maintain thermal equilibrium, the heat generated in thesemiconductor junction(s) must be removed to keep thejunction temperature below specified maximum.In case of low-power devices, the natural heat conductivepath between the case and surrounding air is usuallyadequate for this purpose. The heat generated in the junctionis conveyed to the case or the header by conduction ratherthan convection. A measure of the effectiveness of heatconduction is the inner thermal resistance or thejunction-to-case thermal resistance, RthJC, which is governedby the device construction.Any heat transfer from the case to the surrounding airinvolves radiation convection and conduction, theeffectiveness of transfer being expressed in terms of an RthCAvalue, i.e., external or case ambient thermal resistance. Thetotal junction-to-ambient thermal resistance is consequently:
RthJA = RthJC + RthCA
The total maximum power dissipation, Ptotmax. of asemiconductor device can be expressed as follows:
where:
Tjmax. the maximum allowable junction temperature
Tamb the highest ambient temperature likely to bereached under the most unfavorable conditions
RthJC junction-to-case thermal resistance
RthJA the junction-to-ambient thermal resistance, isspecified for the components. The following diagramshows how the different installation conditions effectthe thermal resistance
RthCA the case-to-ambient thermal resistance, RthCA,depends on cooling conditions. If a heat dissipator orsink is used, RthCA depends on the thermal contactbetween the case and heat sink, upon the heatpropagation conditions in the sink, and upon the rateat which heat is transferred to the surrounding air
Fig. 4 - Junction-to-Ambient Thermal Resistance vs.
Lead Length at Different Assembly
Fig. 5 - In Case of Wire Contacts (Curve B, Figure 4)
Fig. 6 - In Case of Assembly on PC Board, no Heatsink(Curve C, Figure 4)
Fig. 7 - In Case of Assembly on PC Board, with Heatsink(Curve A, Figure 4)
Ptotmax.
Tjmax.Tamb–
RthJA--------------------------------------------------------
Tjmax.
Tamb–
RthJC RthCA+-----------------------------------------------------------= =
a
b
c
5 1580
90
100
R(%
)th
JA
Length l (mm)
25
94 8161
3
0.14 mm2 Cu isolated
≥100
l
94 8162
l
2.5
2.54
94 8163
Side view
Fromunderneath
2.5
2.54
100 mm2
Cu
Cathode
l
94 8164
Side view
Fromunderneath
Reliability and Statistics Glossary
Reliability and Statistics GlossaryVishay Semiconductors
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 80088538 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
DEFINITIONSAccelerated Life Test: A life test under conditions that aremore severe than usual operating conditions. It is helpful, butnot necessary, that a relationship between test severity andthe probability distribution of life be ascertainable.
Acceleration Factor: Notation: f(t) = the time transformationfrom more severe test conditions to the usual conditions. Theacceleration factor is f(t)/t. The differential acceleration factoris df(t)/dt.
Acceptance Number: The largest numbers of defects thatcan occur in an acceptance sampling plan and still have thelot accepted.
Acceptance Sampling Plant: An accept/reject test thepurpose of which is to accept or reject a lot of items ormaterial based on random samples from the lot.
Assessment: A critical appraisal including qualitativejudgments about an item, such as importance of analysisresults, design criticality, and failure effect.
Attribute (Inspection by): A term used to designate amethod of measurement whereby units are examined bynoting the presence (or absence) of some characteristic orattribute in each of the units in the group under considerationand by counting how many units do (or do not) possess it.Inspection by attributes can be two kinds: either the unit ofproduct is classified simply as defective or not defective orthe number of defects in the unit of product is counted withrespect to a given requirement or set of requirements.
Attribute Testing: Testing to evaluate whether or not anitem possesses a specified attribute.
Auger Electron Spectrometer: An instrument, thatidentifies elements on the surface of a sample. It excites thearea of interest with an electron beam and observes theresultant emitted Auger electrons.These electrons have the specific characteristics of the nearsurface elements. It is usually used to identify very thin films,often surface contaminants.
Availability (Operational Readiness): The probability thatat any point in time the system is either operatingsatisfactorily or ready to be placed in operation on demandwhen used under stated conditions.
Average Outgoing Quality (AOQ): The average quality ofoutgoing product after 100 % inspection of a rejected lot, withreplacement by good units of all defective units found ininspection.
Bathtub Curve: A plot of the failure rate of an item (whetherrepairable or not) vs. time. The failure rate initially decreases,then stays reasonably constant, then begins to rise ratherrapidly. It has the shape of bathtub. Not all items have thisbehavior.
Bias:
1. The difference between the s-expected value of anestimator and the value of the true parameter
2. Applied voltage.
Burn-in: The initial operation of an item to stabilize itscharacteristics and to minimize infant mortality in the field.
Confidence Interval: The interval within which it is assertedthat the parameters of a probability distribution lie.
Confidence Level: Equals 1 - α
where
α = the risk (%).
Corrective Action: A documented design, process,procedure, or materials change to correct the true cause of afailure. Part replacement with a like item does not constituteappropriate corrective action. Rather, the action shouldmake it impossible for that failure to happen again.
Cumulative Distribution Function (CDF): The probabilitythat the random variable takes on any value less than orequal to a value x, e.g. F (x) = CDF (x) = Pr (x ≤ X).
Defect: A deviation of an item from some ideal state. Theideal state usually is given in a formal specification.
Degradation: A gradual deterioration in performance as afunction of time.
Derating: The intentional reduction of the stress/strengthratio in the application of an item, usually for the purpose ofreducing the occurrence of stress-related failures.
Duty Cycle: A specified operating time of an item, followedby a specified time of no operation.
Early Failure Period: That period of life, after finalassembly, in which failures occur at an initially high ratebecause of the presence of defective parts andworkmanship. This definition applies to the first part of thebathtub curve for failure rate (infant mortality).
EDX Spectrometer: Generally used with a scanningelectron microscope (SEM) to provide elemental analysis ofX-rays generated on the region being hit by the primaryelectron beam.
Effectiveness: The capability of the system or device toperform its function.
EOS - Electrical Overstress: The electrical stressing ofelectronic components beyond specifications. May becaused by ESD.
ESD - Electrostatic Discharge: The transfer of electrostaticcharge between bodies at different electrostatic potentialscaused by direct contact or induced by an electrostatic field.Many electronic components are sensitive to ESD and will bedegraded or fail.
Reliability and Statistics GlossaryReliability and Statistics
GlossaryVishay Semiconductors
Document Number: 80088 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 539
Expected Value: A statistical term. If x is a random variableand F (x) it its CDF, the E (x) = xdF (x), where the integrationis over all x. For continuous variables with a pdf, this reducesto E (x) = ∫ x pfd (x) dx. For discrete random variables with apfd, this reduces to E (x) = Σ xnp (xn) where the sum is over all n.
Exponential Distribution: A 1 parameter distribution (λ > 0,t ≤ 0) with: pfd (t) = lexp (-λt); Cdf (t) 0 1 - exp (-λt); Sf (t) = exp (-λt) ; failure rate = λ; mean time-to-failure = 1/λ. This is theconstant failure-rate-distribution.
Failure: The termination of the ability of an item to performits required function.
Failure Analysis: The identification of the failure mode, thefailure mechanism, and the cause (i.e., defective soldering,design weakness, contamination, assembly techniques,etc.). Often includes physical dissection.
Failure, Catastrophic: A sudden change in the operatingcharacteristics of an item resulting in a complete loss ofuseful performance of the item.
Failure, Degradation: A failure that occurs as a result of agradual or partial change in the operating characteristics ofan item.
Failure, Initial: The first failure to occur in use.
Failure, Latent: A malfunction that occurs as a result of aprevious exposure to a condition that did not result in animmediately detectable failure. Example: Latent ESD failure.
Failure Mechanism: The mechanical, chemical, or otherprocess that results in a failure.
Failure Mode: The effect by which a failure is observed.Generally, describes the way the failure occurs and tells"how" with respect to operation.
Failure Rate: (A) The conditional probability density that theitem will fail just after time t, given the item has not failed upto time t; (B) The number of failures of an item per unitmeasure of life (cycles, time, miles, events, etc.) asapplicable for the item.
Failure, Wearout: Any failure for which time of occurrence isgoverned by rapidly increasing failure rate.
FIT: Failure Unit; (also, Failures In Time) Failures per 109 h.
Functional Failure: A failure whereby a device does notperform its intended function when the inputs or controls arecorrect.
Gaussian Distribution: A 2 parameter distribution with:
Cdf (x) = guaf (x). SF (x) = gaufc (x). “Mean value of x” u,“standard deviation of x” = σ
Hazard Rate: Instantaneous failure rate.
Hypothesis, Null: A hypothesis stating that there is nodifference between some characteristics of the parentpopulations of several different samples, i.e., that thesamples came from similar populations.
Infant Mortality: Premature catastrophic failures occurringat a much greater rate than during the period of useful lifeprior to the onset of substantial wear out.
Inspection: The examination and testing of supplies andservices (including when appropriate, raw materials,components, and intermediate assemblies) to determinewhether they conform to specified requirements.
Inspection by Attributes: Inspection whereby either theunit of product or characteristics thereof is classified simplyas defective or not defective or the number of defects in theunit of product is counted with respect to a givenrequirement.
Life Test: A test, usually of several items, made for thepurpose of estimating some characteristic(s) of theprobability distribution of life.
Lot: A group of units from a particular device type submittedeach time for inspection and/or testing is called the lot.
Lot Reject Rate (LRR): The lot reject rate is the percentageof lots rejected form the lots evaluated.
Lot Tolerance Percent Defective (LTPD): The percentdefective, which is to be accepted a minimum or arbitraryfraction of the time, or that percent defective whoseprobability of rejection is designated by b.
Mean: (A) The arithmetic mean, the expected value; (B) Asspecifically modified and defined, e.g., harmonic mean(reciprocals), geometric mean (a product), logarithmic mean(logs).
Mean Life: R(t)dt; where R(t) = the s-reliability of the item;t = the interval over which the mean life is desired, usually theuseful life (longevity).
Mean-Life-Between-Failures: The concept is the same asmean life except that it is for repaired items and is the meanup-time of the item. The formula is the same as for mean lifeexcept that R(t) is interpreted as the distribution of up-times.
Mean-time-between-failures (MTBF): For a particularinterval, the total functioning life of a population of an itemdivided by the total number of failures within the populationduring the measurement interval. The definition holds fortime, cycles, miles, events, or other measure of life units.
Mean-Time-To-Failure (MTTF): See "Mean Life".
Mean-Time-To-Repair (MTTR): The total correctivemaintenance time divided by the total number of correctivemaintenance actions during a given period of time.
MTTR: = G(t)dt; where G(t) = CDF of repair time; T - maximum allowed repair time, i.e., item is treated as norepairable at this echelon and is discarded or sent to a higherechelon for repair.
pfd (x) 1
2πσ------------- e
12--- x u–
σ------------⎝ ⎠
⎛ ⎞ 2
⋅=
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 80088540 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Reliability and Statistics GlossaryVishay Semiconductors Reliability and Statistics
Glossary
Operating Characteristic (OC) Curve: A curve showing therelation between the probability of acceptance and either lotquality or process quality, whichever is applicable.
Part Per Million (PPM): PPM is arrived at by multiplying thepercentage defective by 10 000.Example: 0.1 % = 1.000 PPM.
Population: The totality of the set of items, units,measurements, etc., real or conceptual that is underconsideration.
Probability Distribution: A mathematical function withspecific properties, which describes the probability that arandom variable will take on a value or set of values. If therandom variable is continuous and well behaved enough,there will be a pdf. If the random variable is discrete, therewill be a pmf.
Qualification: The entire process by which products areobtained from manufacturers or distributors, examined andtested, and then identified on a Qualified Product List.
Quality: A property, which refers to the tendency of an itemto be made to specific specifications and / or the customer’sexpress needs. See current publications by Juran, Deming,Crosby, et al.
Quality Assurance: A system of activities that providesassurance that the overall quality control job is, in fact, beingdone effectively. The system involves a continuingevaluation of the adequacy and effectiveness of the overallquality control program with a view to having correctivemeasures initiated where necessary. For a specific productor service, this involves verifications, audits, and theevaluation of the quality factors that affect the specification,production inspection, and use of the product or service.
Quality Characteristics: Those properties of an item orprocess, which can be measured, reviewed, or observed andwhich are identified in the drawings, specifications, orcontractual requirements. Reliability becomes a qualitycharacteristic when so defined.
Quality Control (QC): The overall system of activities thatprovides a quality of product or service, which meets theneeds of users; also, the use of such a system.
Random Samples: As commonly used in acceptancesampling theory, the process of selecting sample units insuch a manner that all units under consideration have thesame probability of being selected.
Reliability: The probability that a device will function withoutfailure over a specified time period or amount of usage atstated conditions.
Reliability Growth: Reliability growth is the effort, and theresource commitment, to improve design, purchasing,production, and inspection procedures to improve thereliability of a design.
Risk: α: The probability of rejecting the null hypothesisfalsely.
Scanning Electron Microscope (SEM): An instrumentwhich provides a visual image of the surface features of an
item. It scans an electron beam over the surface of a samplewhile held in a vacuum and collects any of several resultantparticles or energies. The SEM provides depth of field andresolution significantly exceeding light microscopy and maybe used at magnifications exceeding 50 000 times.
Screening Test: A test or combination of tests intended toremove unsatisfactory items or those likely to exhibit earlyfailures.
Significance: Results that show deviations betweenhypothesis and the observations used as a test of thehypothesis, greater than can be explained by randomvariation or chance alone, are called statistically significant.
Significance Level: The probability that, if the hypothesisunder test were true, a sample test statistic would be as badas or worse than the observed test statistic.
SPC: Statistical Process Control.
Storage Life (Shelf Life): The length of time an item can bestored under specified conditions and still meet specifiedrequirements.
Stress: A general and ambiguous term used as an extensionof its meaning in mechanics as that which could causefailure. It does not distinguish between those things whichcause permanent damage (deterioration) and those thingswhich do not (in the absence of failure).
Variance: The average of the squares of the deviations ofindividual measurements from their average. It is a measureof dispersion of a random variable or of data.
Wearout: The process of attribution which results in anincrease of hazard rate with increasing age (cycles, time,miles, events, etc.) as applicable for the item.
ABBREVIATIONSAQL Acceptable quality level
CAR Corrective action report/request
DIP Dual in-line package
ECAP Electronic circuit analysis program
EMC Electro magnetic compatibility
EMI Electro magnetic interference
EOS Electrical overstress
ESD Electrostatic discharge
FAR Failure analysis report/request
FIT (Failure in time) Failure unit; Failures/109 h
FMEA Failure mode and effects analysis
FTA Fault tree analysis
h (t) Hazard rate
LTPD Lot tolerance percent defective
MOS Metal oxide semiconductor
MRB Material review board
MTBF Mean-time-between-failures
MTTF Mean-time-to-failure
Reliability and Statistics GlossaryReliability and Statistics
GlossaryVishay Semiconductors
Document Number: 80088 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 541
MTTR Mean-time-to-repair
PPM Parts per million
PRST Probability ratio sequential test
QA Quality assurance
QC Quality control
QPL Qualified products list
RPM Reliability planning and management
SCA Sneak circuit analysis
SEM Scanning electron microscope
TW Wearout time
Z (t) Hazard rate
λ Failure rate (Lambda)
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 37
Packaging and Order Information
Packaging and Order InformationVishay Semiconductors
PACKAGING SURVEY
MOISTURE PROOF PACKAGINGThe reel is packed in a moisture proof aluminum bag toprotect devices from absorbing moisture duringtransportation and storage.
Fig. 1 - Moisture Proof Packaging
RECOMMENDED METHOD OF STORAGEDry box storage is recommended as soon as the dry bag hasbeen opened to prevent moisture absorption.The following conditions should be observed if dry boxes arenot available:
• Storage temperature 10 °C to 30 °C
• Storage humidity ≤ 60 % RH max.
After storage longer than the specified floor life (see table 2),moisture content will be too high for reflow soldering. In caseof moisture absorption, the devices will recover to their formercondition by drying using conditions according to theindividual moisture sensitivity level (MSL) specified on asticker affixed to the dry bags (e.g. figure 2, MSL 2a).
Fig. 2 - Example of MSL Sticker
TABLE 1 - PACKAGING OPTIONS OF DETECTOR AND EMITTER DEVICES
PACKAGEFORM
SERIESPACKAGING OPTION
BULK TAPEBLISTER
TAPETUBE
Metal can BPW./TS. X
Side view lens
TEKS5400. X
TEKS5400STEKT5400STSKS5400S
X X
TSKS542.X01 X
SMDTEM./TSM./VEM./VSM.
X
Top view mold
BP104BPW34
X
BP104S BPW34S X
Other leaded
packagesBP./TE./TS. X X
Reel
Aluminum bag
Moisture levelsticker
0
Bar code label
ESD sticker
18298
Box
TABLE 2 - MOISTURE SENSITIVITY LEVEL, FLOOR LIFE AND FLOOR CONDITIONS
MSL FLOOR LIFE CONDITIONS
1 No limit ≤ 30 °C/90 % RH
2 1 year
≤ 30 °C/60 % RH
2a 672 h
3 168 h
4 72 h
5 24h/48 h
6 6 h
L E V E L
CAUTION This bag contains MOISTURE –SENSITIVE DEVICES
1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be:
a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. 3. Devices require baking before mounting if:
a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met.
4. If baking is required, devices may be baked for:
192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or 96 hours at 60±5oCand <5%RH For all device containers or 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label)
Note: LEVEL defined by EIA JEDEC Standard JESD22-A113
2a
19786
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009038 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
ESD PRECAUTIONProper storage and handling procedures should be followedto prevent ESD damage to the devices, especially when theyare removed from the antistatic shielding bag.
BAR CODE LABELSVishay Semiconductor standard bar code labels are printedon the final package. Labels containing VishaySemiconductor specific data are affixed to each packageunit.
Fig. 3 - Bar code design and information
A) PDF417 bardoce including 325 char
B) Plant code according TQD9021http://intra.hn.vishay.com/quality/docs/tqd/tqd_9021.htm
C) Lot1 and Lot2 reflects the lot numbers. Lot2 is acombination of 19 (PTC), 0745 (YYWW), 1 (productionday MO=1, TU=2), A (Shift A,B,C) and 01 as productionequipment
D) Batch contains the datecode 200745 (YYYYWW), origin(PH=Philippines), 19 (PTC)
E) Unique label serial number: VO production location (ISO),01=label station ID, 00001158 (serial number)
F) Check digit: counting number starting at A00 up to Z99 togive e.g. a manufactured reel a serial number (track andtrace information)
TAPING OF SMDVishay SMD IR emitters and detectors are packed inantistatic blister tapes (in accordance with DIN IEC 40 (CO)564) for automatic component insertion. The blister tapes areplastic strips with impressed component cavities, which arecovered by a glued top tape.
Missing Devices
A maximum of 0.5 % of the total number of components perreel may be missing, excluding missing components at thebeginning and at the end of reel. A maximum of threeconsecutive components may be missing. This gap isfollowed by ≥ 6 consecutive components (minimum).
Fig. 4 - Beginning and End of Reel
21379A B C D E F
De-reeling direction
Tape leader
min. 75 emptycompartments
> 160 mm
40 emptycompartments
Carrier leader Carrier trailer
94 8158
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 39
TAPING SMD PLCC-2 PACKAGE
Fig. 5 - Blister Tape
Fig. 6 - Tape Dimensions in mm for PLCC-2
TAPING STANDARDS GS08 AND GS18GS08: 1500 pcs/reel
GS18: 8000 pcs/reel
The tape leader is at least 160 mm and is followed by acarrier tape leader with at least 40 empty compartments(figure 3). The tape leader may include carrier tape as longas the cover tape is not connected to carrier tape.The last component is followed by a carrier tape trailer withat least 75 empty compartments, sealed with cover tape.
Fig. 7 - Reel Dimensions: GS08
Fig. 8 - Reel Dimensions: GS18
COVER TAPE REMOVAL FORCEThe removal force may vary in strength between 0.1 N and1.0 N at a removal speed of 5 mm/s.In order to prevent components from popping out of blisters,the cover tape must be pulled off at an angle of 180° relativeto the feed direction.
Adhesive tape
Component cavity
Blister tape
94 8670
1.851.65
4.03.6
3.63.4
2.051.95
1.61.4
4.13.9
4.13.9
5.755.25
8.37.7
3.53.1
2.22.0
0.25
94 8668
180178
4.53.5
2.51.5
13.0012.75
63.560.5
14.4 max.
10.09.0
120°
94 8665
Identification
Label:Vishaytypegrouptape codeproductioncodequantity
321329
Identification
4.53.5
2.51.5
13.0012.75
62.560.0
14.4 max.
10.48.4
120°
18857
Label:Vishaytypegrouptape codeproductioncodequantity
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009040 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
TAPING SMD WITH PCB OR DOME PACKAGEDimensions in millimeters
Fig. 9 - Blister Tape of TEMD5000 and TEMD5100
Fig. 10 - Reel of TEMD5010X01/5020X01/5110X01/5120X01/5510FX01
16129
20874
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 41
Fig. 11 - Blister Tape of TEMD5010X01/5020X01/5110X01/5120X01/5510FX01
Fig. 12 - Reel of TEMx1000 Series and TSMx1000 SeriesQuantity per Reel: 1000 pcs
20537
Issue: 3; 11.06.08
Drawing-No.: 9.800-5080.01-4
Leader and trailer tape:
Parts mounted
Empty trailer (200 mm, min.)
Empty leader (400 mm, min.)
Direction of pulling out
Unreel direction
60.2
±0.
5
178
±1
2. 5
±0.5
Label posted here
coming out from reelTape position
X
X
13±
0.5
13.2 ±1.5
16 ±0.2
18033
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009042 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
Fig. 13 - Blister Tape of TSMF1000, TSML1000, and TEMD1000
Fig. 14 - Blister Tape of TSMF1020, TSML1020, and TEMD1020
18030
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through hole
Quantity per reel: 1000 pcs or 5000 pcs
Feed directionAnode
18031
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through hole
Quantity per reel: 1000 pcs or 5000 pcs
Feed directionAnode
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 43
Fig. 15 - Blister Tape of TSMF1030, TSML1030, and TEMD1030
Fig. 16 - Blister Tape of TEMT1000
18032
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through hole Quantity per reel: 1000 pcs or 5000 pcs
Feed directionAnode
18089
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through holeQuantity per reel: 1000 pcs or 5000 pcs
Feed directionCollector
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009044 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
Fig. 17 - Blister Tape of TEMT1020 and TEMT1520
Fig. 18 - Blister Tape of TEMT1030
18090
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through holeQuantity per reel: 1000 pcs or 5000 pcs
Feed directionCollector
18091
3.05 ± 0.1
0.3 Ø 1.55 ± 0.05
4 ± 0.1
2 ± 0.05
4 ± 0.1
1.75
± 0
.15.
5 ±
0.0
5
12 ±
0.3
Top tape
Push pin through hole
Quantity per reel: 1000 pcs or 5000 pcs
Feed directionCollector
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 45
Fig. 19 - Reel of TEMx6000 SeriesQuantity per Reel: 3000 pcs
Fig. 20 - Blister Tape of TEMD6010FX01
20874
20877
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009046 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
Fig. 21 - Blister Tape of TEMT6000X01
Fig. 22 - Reel of TEMx6200X01 SeriesQuantity per reel: 3000 pcs
20875
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 47
Fig. 23 - Blister Tape of TEMT6200FX01
TAPING OF T-1 (3 mm) AND T-1 3/4 (5 mm) DEVICESThe taping specification is based on IEC publication 286,taking into account industrial requirements for automaticinsertion.Absolute maximum ratings, mechanical dimensions, opticaland electrical characteristics for taped devices are identicalto basic catalog types and can be found in specifications foruntaped devices.Note that the lead wires of taped components may beshorted or bent in accordance to the IEC standard.
PACKAGINGThe tapes of components are available on reels or inAmmopack. Each reel and each box is marked with labelcontaining the following information:
- Vishay
- Type
- Group
- Tape code (see figure 24)
- Productions code
- Quantity
CODE FOR TAPED DEVICES
Fig. 24 - Taping Code
Number of Packed Components
T-1 (3 mm): 2000 pcs
T-1 3/4 (5 mm): 1000 pcs
20690
Quantity per reel: 3000 pcs
Tape varieties Spacing of lead frameA, B, C, E, F, G, M
A 1
S: 2.54 mmT: 5.08 mm
12: Cathode/collector leaves the reel first
21: Anode/emitter leaves the reel first
1: Cathode/collector
2: Anode/emitter
A Z Z: only forfan fold packingboth polarities18801
2S
S
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009048 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
MISSING COMPONENTSUp to 3 consecutive components may be missing but the gapis followed by at least 6 components. A maximum of 0.5 % ofcomponents per reel quantity may be missing. At least 5empty positions are present at the start and the end of thetape to enable tape insertion.Tensile strength of the tape: ≥ 15 NPulling force in plane of the tape, at right angles to reel: ≥ 5 NNote: Shipment in fan-fold packages is standard for radialtaped devices.Shipment in reel packing is only possible if the customerguarantees removal of empty reels.According to what is stated in a German packaging decree(Verpackungsverordnung) we are not able to accept return ofreels.
ORDERING CODEType designations are extended by a code for the tapingstandard.
Example:
TSAL6200-AS12 (reel packing)
TSAL6200-ASZ (fan-fold packing)
BPW85-AS12 (reel packing)
TABLE 3: TAPING SURVEY OF LEADED COMPONENTS
CODE FORTAPING STANDARD
“H“ - HIGH OF TAPING IN mm (TOLERANCES ± 0.5 mm) PREFERENCES REMARKS
3 mm 5 mm SIDEVIEW’S
AS12
17.3 17.3 16.0 Standard
Reel, cathode/collector leaves first
AS21 Reel, anode/emitter leaves first
ASZ Ammopack
CS12
22.0 22.0 -
Reel, cathode/collector leaves first
CS21 Reel, anode/emitter leaves first
CSZ Ammopack
ES12
- 24.0 24.0 Standard
Reel, cathode/collector leaves first
ES21 Reel, anode/emitter leaves first
ESZ Ammopack
EGZ - - 24.0Ammopack
2 mm pin distance lead to lead
MS12
25.5 25.5 -
Reel, cathode/collector leaves first
MS21 Reel, anode/emitter leaves first
MSZ Ammopack
GSZ - - 29.0Ammopack
2 mm pin distance lead to lead
FSZ - - 27.0 Standard Ammopack
FGZ - - 27.0Ammopack
2 mm pin distance lead to lead
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 49
REEL DIMENSIONS in millimeters
Fig. 25 - Dimensions of the Reel
Fig. 26 - Components on Tape and Reel
AMMOPACKThe tape is folded in a concertina arrangement and laid in acardboard box.If components are required to have the cathode or collectorleave the box first (figure 27), then open the box at the sidemarked with the “-” symbol. If anode or emitter sould leavethe box first, then open at the side marked with the“+” symbol.
Fig. 27 - Tape Feed Direction
Identification label:
355
90
30
4845
52 max.
948641Vishay/type/group/tape code/production code/quantity
Paper
Adhesive tape
Identification labelReel
Tape
Diodes: anode before cathodePhototransistors: emitter before collectorCode 21
Diodes:cathode before anode
Phototransistors:collector before emitter
Code 12
94 8671
TABLE 4 - INNER DIMENSIONS OF AMMOPACK
Amm
Bmm
Cmm
COMPONENTS
340 46 125 T-1 3/4 (5 mm)
340 34 140 T-1 (3 mm) AS-taping
340 41 140 T-1 (3 mm) other than AS-taping
348 43 125 FSZ side view lens
348 46 125 GSZ side view lens
Tape feed direction code 12Diodes: cathode before anodeTransistors: collector before emitter
Label Tape feed direction code 21
C
B
A
94 8667
Diodes: anode before cathodeTransistors: emitter before collector
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8009050 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Packaging and Order InformationVishay Semiconductors Packaging and Order
Information
TAPING OF T-1 (3 mm) PACKAGESPolarity options: Z, 12, 21
Fig. 28 - Taping of T-1 (3 mm) Devices
TAPING OF T-1 3/4 (5 mm) PACKAGESPolarity options: Z, 12, 21
Fig. 29 - Taping of T-1 3/4 (5 mm) Devices
Fig. 30 - Taping of Side View Lens Packages
TABLE 5 - POSITION OF T-1 (3 mm) COMPONENTS IN TAPE
OPTION H PREFERENCE
AS 17.3 ± 0.5 mm recommended
MS 25.5 ± 0.5 mm recommended
CS 22.0 ± 0.5 mm
Reel(Mat. - No. 1764)Quantity per:
200094 8171
TABLE 6 - POSITION OF T-1 3/4 (5 mm) COMPONENTS IN TAPE
OPTION H PREFERENCE
AS 17.3 ± 0.5 mm recommended
MS 25.5 ± 0.5 mm recommended
CS 22.0 ± 0.5 mm
ES 24.0 ± 0.5 mm
Reel(Mat. - No. 1764)Quantity per:
1000
94 8172
Option H
AS 16 ± 0.5 mm
ES 24 ± 0.5 mm
FS 27 ± 0.5 mm
GS 29 mm
EG 24 ± 0.5 mm
FG 27 ± 0.5 mm
+ 0.2- 0.5
18886
Ammopack
(Mat. - No. 1763)Quantity per:
2000
Bend leads:Lead standard xGStraight leads:Lead standard xS
Packaging and Order InformationPackaging and Order
InformationVishay Semiconductors
Document Number: 80090 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 51
Fig. 31 - Taping of Side View PIN Photodiodes
TUBE PACKAGING OF TOP VIEW PIN PHOTODIODES BP104S AND BPW34SDimensions in millimeters
Fig. 32 - Drawing Proportions Not Scaled
Quantity per:
Reel(Mat. - No. 1764)
1000
18887
Option H
AS 16 ± 0.5 mm
ES 24 ± 0.5 mm
MS 25.5 ± 0.5 mm
18800
Stopper
10.7
9.5
214.5
Quantity per tube: 45 pcsQuantity per box: 1800 pcs
Document Number: 80086 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.0, 26-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 19
Physics and Technology
Physics and TechnologyVishay Semiconductors
EMITTERS
Materials
Infrared emitting diodes (IREDs) can be produced from arange of different III-V compounds. Unlike the elementalsemiconductor silicon, compound III-V semiconductorsconsist of two or more different elements of group three (e.g.,Al, Ga, In) and five (e.g., P, As) of periodic table. Thebandgap energies of these compounds vary between0.18 eV and 3.4 eV. However, the IREDs considered hereemit in the near infrared spectral range between 800 nm and1000 nm, and, therefore, the selection of materials is limitedto GaAs and mixed crystal Ga1-XAlXAs, 0 ≤ X ≤ 0.8, madefrom pure compounds GaAs and AlAs.Infrared radiation is produced by the radiative recombinationof electrons and holes from the conduction and valencebands. Emitted photon energy, therefore, correspondsclosely to bandgap energy Eg. The emission wavelength canbe calculated according to the formula λ (µm) = 1.240/Eg(eV). Internal efficiency depends on band structure, dopingmaterial and doping level. Direct bandgap materials offerhigh efficiencies, because no phonons are needed forrecombination of electrons and holes. GaAs is a direct gapmaterial and Ga1-XAlXAs is direct up to X = 0.44. Dopingspecies Si provides the best efficiencies and the shiftsemission wavelength below the bandgap energy into theinfrared spectral range by about 50 nm typically. Chargecarriers are injected into the material via pn junctions.Junctions of high injection efficiency are readily formed inGaAs and Ga1-XAlXAs. P-type conductivity can be obtainedwith metals of valency two, such as Zn and Mg, and n-typeconductivity with elements of valency six, such as S, Se andTe. However, silicon of valency four can occupy sites ofIII-valence and V-valence atoms, and, therefore, acts asdonor and as acceptor. Conductivity type depends primarilyon material growth temperature. By employing exacttemperature control, pn junctions can be grown with thesame doping species Si on both sides of the junction. Ge, onthe other hand, also has a valency of four, but occupiesgroup V sites at high temperatures i.e., p-type.Only mono crystalline material is used for IRED production.In the mixed crystal system Ga1-XAlXAs, 0 ≤ X ≤ 0.8, latticeconstant varies only by about 1.5 x 10-3. Therefore, monocrystalline layered structures of different Ga1-XAlXAscompositions can be produced with extremely high structuralquality. These structures are useful because the bandgapcan be shifted from 1.40 eV (GaAs) to values beyond 2.1 eVwhich enables transparent windows and heterogeneousstructures to be fabricated. Transparent windows areanother suitable means to increase efficiency, andheterogeneous structures can provide shorter switchingtimes and higher efficiency. Such structures are termedsingle hetero (SH) or double hetero structures (DH). DHstructures consist normally of two layers that confine a layerwith a much smaller bandgap.
The best production method for all materials needed is liquidphase epitaxy (LPE). This method uses Ga-solutionscontaining As, possibly Al, and a doping substance. Thesolution is saturated at a high temperature, typically 900 °C,and GaAs substrates are dipped into the liquid. The solubilityof As and Al decreases with decreasing temperature. In thisway epitaxial layers can be grown by slow cooling of thesolution. Several layers differing in composition may beobtained using different solutions one after another, asneeded e.g. for DHs.In liquid phase epitaxial reactors, production quantities of upto 50 wafers, depending on type of structure required, can behandled.
IRED CHIPS AND CHARACTERISTICSAt present, the most popular IRED chip is made only fromGaAs. The structure of the chip is displayed in figure 1.
Fig. 1
On an n-type substrate, two Si-doped layers are grown byliquid phase epitaxy from the same solution producing anemission wavelegth of 950 nm. Growth starts as n-type athigh temperature and becomes p-type below about 820 °C.A structured Al-contact on p-side and a large area Au:Gecontact on back side provide a very low series resistance.The angular distribution of emitted radiation is displayed infigure 2.
Fig. 2
p - GaAs : SiAl
Au : Ge n - GaAs Substrate
ca. 420 mm
94 8200
n - GaAs : Si
0 20 40 60 80 %
0° 30°
60°
90°94 8197
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008620 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.0, 26-Aug-08
Physics and TechnologyVishay Semiconductors Physics and Technology
The package of the chip has to provide good collectionefficiency of radiation emitted sideways, and has to diminishthe refractive index step between the chip (n = 3.6) and theair (n = 1.0) with an epoxy of refractive index of 1.55. In thisway, the output power of chip is increased by a factor of 3.5for the assembled device.The chip described is the most cost-efficient one. Its forwardvoltage at IF = 1.5 A has the lowest possible value. Totalseries resistance is typically only 0.60 Ω; output power andlinearity (defined as optical output power increase, divided bycurrent increase between 0.1 A and 1.5 A) are high. Relevantdata on chip and a typical assembled device are given intable 1.The technology used for a chip emitting at 880 nm eliminatesthe absorbing substrate and uses only a thick epitaxial layer.The chip is shown in figure 3.
Fig. 3
Originally, the GaAs substrate was adjacent to the n-side.Growth of Ga0.7Al0.3As started as n-type and became p-type- as in the first case - through the specific properties of thedoping material Si. A characteristic feature of the Ga-Al-Asphase system causes the Al-content of growing epitaxiallayer to decrease. This causes the Al-concentration at thejunction to drop to 8 % (Ga0.92Al0.08As), producing anemission wavelength of 880 nm. During further growth theAl-content approaches zero. The gradient of the Al-contentand correlated gradient of bandgap energy produce anemission band of a relatively large half width. Thetransparency of the large bandgap material results in a highexternal efficiency on this type of chip.The chip is mounted n-side up, and the front sidemetallization is Au:Ge/Au, whereas the reverse sidemetallization is Au:Zn.The angular distribution of the emitted radiation is displayedin figure 4.
Fig. 4
Due to its shorter wavelength, Ga1-XAlXAs chip describedabove offers specific advantages in combination with a Sidetector. Integrated opto ICs, like amplifiers or SchmittTriggers, have higher sensitivities at shorter wavelengths.Similarly, phototransistors are also more sensitive. Finally,the frequency bandwidth of pin diodes is higher at shorterwavelengths. This chip also has the advantage of havinghigh linearity up to and beyond 1.5 A. The forward voltage,however, is higher than the voltage of a GaAs chip. Table 2(see “Symbols and Terminology”) provides more data on thechip.A technology combining some of the advantages of the twotechnologies described above is summarized in figure 5.
Fig. 5
Starting an with n-type substrate, n- and p-type GaAs layersare grown in a similar way to the epitaxy of a standardGaAs:Si diode. After this, a highly transparent window layerof Ga1-XAlXAs, doped p-type is grown. The upper contact tothe p-side is made of Al and the rear side contact is Au:Ge.The angular distribution of emitted radiation is shown infigure 6.
ca. 370 mm
Au : Ge/Au
Au : Zn p - GaAlAs : Si
n - GaAlAs : Si
94 8201
0 20 40 60 80 %
0° 30°
60°
90°94 8198
p - GaAlAs : Ge
n - GaAs : SiAl
Au : Ge n - GaAs Substrate
p - GaAs : Si
ca. 420 mm94 8202
Physics and TechnologyPhysics and Technology Vishay Semiconductors
Document Number: 80086 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.0, 26-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 21
Fig. 6
This chip type combines a relatively low forward voltage witha high electro-optical efficiency, offering an optimizedcombination of the advantageous characteristics of the twoother chips. Refer again to table 2 (see “Symbols andTerminology”) for more details.As mentioned in the previous section, doubleheterostructures (DH) provide even higher efficiencies andfaster switching times. A schematic representation of such achip is shown in figure 7.
Fig. 7
The active layer is depicted as the thin layer between thep- and n- type Ga1-XAlXAs confinement layers.The contacts are dependent on the polarity of the chip. If p isup, then the p-side contact is Al and the back side Au:Ge; ifn is up, then this side has an Au:Ge contact and the backside Au:Zn.Two such chips that are also very suitable forIrDA applications are given in table 1.
UV, VISIBLE, AND NEAR IR SILICON PHOTODETECTORS(adapted from ”Sensors, Vol 6, Optical Sensors, Chapt. 8,VCH - Verlag, Weinheim 1991”)
Silicon Photodiodes (PN and PIN Diodes)
The physics of silicon detector diodes
Absorption of radiation is caused by the interaction ofphotons and charge carriers inside a material. The differentenergy levels allowed and the band structure determine thelikelihood of interaction and, therefore, the absorptioncharacteristics of the semiconductors. The long wavelengthcutoff of the absorption is given by the bandgap energy. Theslope of the absorption curve depends on the physics ofinteraction and is much weaker for silicon than for most othersemiconducting materials. This results in a strongwavelength-dependent penetration depth which is shown infigure 8. (The penetration depth is defined as that depthwhere 1/e of the incident radiation is absorbed.)
Fig. 8 - Absorption and Penetration Depth ofOptical Radiation in Silicon
0 20 40 60 80 %
0° 30°
60°
90°94 8199 ca. 420 mm
Anode
n - GaAlAsCathode
12781
p - GaAlAsp -GaAs
TABLE 1: CHARACTERISTICS DATA OF IRED CHIPS
TECHNOLOGYTYPICAL CHIP DATA
TYPICAL DEVICE
TYPICAL DEVICE DATA
Φe at 0.1 A(mW)
λp(nm)
Δλ(nm)
POLARITYΦe at 0.1 A
(mW)Φe at 1.5 A
(mW)VF at 0.1 A
(V)VF at 1.0 A
(V)tr at 0.1 A
(ns)
GaAs 7.7 950 50 p up TSUS540. 20 140 1.3 2.1 800
GaAlAs 6.7 875 80 n up TSHA550. 27 350 1.5 3.4 600
GaAlAs/GaAs 16 940 50 p up TSAL6200 35 300 1.35 2.4 800
GaAlAs/GaAlAs 16 890 40 p up TSHF5410 45 1.5 30
GaAlAs/GaAlAs 17 870 40 p up TSFF5410 50 1.5 15
0.4 0.6 0.8 1.0
Abs
orpt
ion
Coe
ffici
ent (
cm-1)
Wavelength (nm)
1.2
94 8595
Penetration D
epth (µm)
105
104
103
102
101
100
100
101
102
103
104
10-1
Si
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008622 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.0, 26-Aug-08
Physics and TechnologyVishay Semiconductors Physics and Technology
Depending on the wavelength, the penetration depth variesfrom tenths of a micron at 400 nm (blue) to more than 100 µmat 1 µm (IR). For detectors to be effective, an interactionlength of at least twice the penetration depth should berealized (equivalent to 1/e2 = 86 % absorbed radiation). In thepn diode, generated carriers are collected by the electricalfield of the pn junction. Effects in the vicinity of a pn junctionare shown in figure 9 for various types and operating modesof the pn diode. Incident radiation generates mobile minoritycarriers - electrons on the p-side, holes on the n-side. In theshort circuit mode shown in figure 9 (top), the carriers driftunder the field of the built-in potential of the pn junction. Othercarriers diffuse inside the field-free semiconductor along aconcentration gradient, which results in an electrical currentthrough the applied load, or without load, in an externalvoltage, open circuit voltage, VOC, at contact terminals.Bending of the energy bands near the surface is caused bysurface states. An equilibrium is established betweengeneration, recombination of carriers, and current flowthrough the load.
Fig. 9 - Generation-Recombination Effects in the Vicinityof a PN Junction
Top: Short Circuit Mode, Bottom: Reverse Biased
Recombination takes place inside the bulk material withtechnology- and process-dependent time constants whichare very small near the contacts and surfaces of the device.For short wavelengths with very small penetration depths,carrier recombination is the efficiency limiting process. Toachieve high efficiencies, as many carriers as possible shouldbe separated by the electrical field inside the space chargeregion. This is a very fast process, much faster than typicalrecombination times (for data, see chapter ’Operating modes
and circuits’). The width, W, of the space charge is a functionof doping the concentration NB and applied voltage V:
(1)
(for a one-sided abrupt junction), where Vbi is built-in voltage,εs dielectric constant of Si, εo vacuum dielectric constant andq is electronic charge. The diode’s capacitance (which canbe speed limiting) is also a function of the space charge widthand applied voltage. It is given by
(2)
where A is the area of the diode. An externally applied biaswill increase the space charge width (see figure 8) with theresult that a larger number of carriers are generated insidethis zone which can be flushed out very fast with highefficiency under the applied field. From equation (1), it isevident that the space charge width is a function of the dopingconcentration NB. Diodes with a so-called pin structure showaccording to equation (1) a wide space charge width where istands for intrinsic, low doped. This zone is also sometimesnominated as n or p rather than low doped n, n- or p, p-zoneindicating the very low doping. Per equation (2), the junctioncapacitance C, is low due to the large space charge region ofPIN photodiodes. These photodiodes are mostly used inapplications requiring high speed.Figure 10 shows a cross section of PIN photodiodesand PN diodes. The space charge width of the PINphotodiodes (bottom) with a doping level (n = NB) as low asNB = 5 x 1011 cm-3 is about 80 µm wide for a 2.5 Vbias in comparison with a pn diode with a doping (n) ofNB = 5 x 1015 cm-3 with only 0.8 mm.
Fig. 10 - Comparison of PN Diode (Top)and PIN Photodiode (Bottom)
Without external bias
0
Ene
rgy
h
Surface States
94 8596
Reverse bias applied
0
Ene
rgy
h
94 8597
W2 εS εo Vbi V+( )×××
q NB×---------------------------------------------------------=
CεS εo× A×
W----------------------------=
n+
ν: to 10 000 Ωcmi
Space charge
p+
94 8599
Antireflection coatingIsolation layer
Space charge
n
Contact
1 to 10 Ωcm
p+Contact
94 8598
n+
Physics and TechnologyPhysics and Technology Vishay Semiconductors
Document Number: 80086 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.0, 26-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 23
PROPERTIES OF SILICON PHOTODIODES
I-V Characteristics of illuminated pn junction
The cross section and I-V-characteristics of a photodiode areshown in figure 11 and 12. The characteristic of theilluminated diode is identical to the characteristic of astandard rectifier diode. The relationship between current, I,and voltage, V, is given by
(3)
withVT = kT/q
k = 1.38 x 10-23 JK-1, Boltzmann constant
q = 1.6 x 10-19 As, electronic charge.
IS, the dark-reverse saturation current, is a material- andtechnology-dependent quantity. The value is influenced bythe doping concentrations at pn junction, by carrier lifetime,and especially by temperature. It shows a stronglyexponential temperature dependence and doubles every8 °C.
Fig. 11 - Measured I-V-Characteristics of an Si Photodiode in the Vicinity of the Origin
The typical dark currents of Si photodiodes are dependent onsize and technology and range from less than picoamps upto tens of nanoamps at room temperature conditions. Asnoise generators, dark current Ir0 and the resistance Rsh(defined and measured at a voltage of 10 mV forward orreverse, or peak-to-peak) are limiting quantities whendetecting very small signals.The photodiode exposed to optical radiation generates aphotocurrent Ir exactly proportional to incident radiant powerΦe.
Fig. 12 - I-V-Charachteristics of an Si Photodiode under Illumination. Parameter: Incident Radiant Flux
The quotient of both is spectral responsibility s(λ),
(4)
The characteristic of the irradiated photodiode is then given by
(5)
and in case V ≈ 0, zero or reverse bias we find,
(6)
Dependent on load resistance, RL, and applied bias, differentoperating modes can be distinguished. An unbiased diodeoperates in photovoltaic mode. Under short circuit conditions(load RL = 0 Ω), short circuit current, ISC flows into the load.When RL increases to infinity, the output voltage of the dioderises to the open circuit voltage, VOC, given by
(7)
Because of this logarithmic behavior, the open circuit voltageis sometimes used for optical light meters in photographicapplications. The open circuit voltage shows a strongtemperature dependence with a negative temperaturecoefficient. The reason for this is the exponentialtemperature coefficient of the dark reverse saturation currentIS. For precise light measurement, a temperature control ofthe photodiode is employed. Precise linear optical powermeasurements require small voltages at the load, typicallysmaller than about 5 % of the corresponding open circuitvoltage. For less precise measurements, an output voltageof half the open circuit voltage can be allowed. The mostimportant disadvantage of operating in photovoltaic mode isthe relatively large response time. For faster response, it isnecessary to implement an additional voltage sourcereverse-biasing the photodiode. This mode of operation istermed photoconductive mode. In this mode, the lowestdetectable power is limited by the shot noise of the darkcurrent, IS, while in photovoltaic mode, the thermal (Johnson)noise of shunt resistance, Rsh, is the limiting quantity.
I IS Vexp VT⁄ 1–( )×=F
orw
ard
Cur
rent
(nA
)
Rev
. Cur
rent
(nA
)
- 2
- 4
2
4
6
8
- 160 - 120 - 80 - 40
40 80
Rsh = dV/dl
Reverse Voltage (mV)
Forw. Volt. (mV)
94 8601
Φe = 0
Φe ISC
I
IΦ1VOC
94 8600
s λ( ) Ir φe⁄ A W⁄[ ]=
I IS Vexp VT⁄ 1–( ) s λ( ) φe×–×=
I IS s λ( ) φe×––=
VOC VT s λ( ) φe IS 1+⁄×( )ln×=
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008624 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.0, 26-Aug-08
Physics and TechnologyVishay Semiconductors Physics and Technology
SPECTRAL RESPONSIVITY
Efficiency of Si photodiodes:
The spectral responsivity, sλ, is given as the number ofgenerated charge carriers (η x N) per incident photons N ofenergy h x ν (η is percent efficiency, h is the Plancksconstant, and ν is the radiation frequency). Each photon willgenerate one charge carrier at the most. The photocurrent Ireis then given as
(8)
(9)
At fixed efficiency, a linear relationship between wavelengthand spectral responsivity is valid.Figure 8 shows that the semiconductors absorb radiationsimilar to a cut-off filter. At wavelengths smaller than thecut-off wavelength, the incident radiation is absorbed. Atlarger wavelengths the radiation passes through the materialwithout interaction. The cut-off wavelength corresponds tothe bandgap of the material. As long as the energy of thephoton is larger than the bandgap, carriers can be generatedby absorption of photons, provided that the material is thickenough to propagate photon-carrier interaction. Bearing inmind that the energy of photons decreases with increasingwavelength, we can see, that the curve of the spectralresponsivity vs. wavelength in ideal case (100 % efficiency)will have a triangular shape (see figure 13). For siliconphotodetectors, the cut-off wavelength is near 1100 nm.In most applications, it is not necessary to detect radiationwith wavelengths larger than 1000 nm. Therefore, designersuse a typical chip thickness of 200 µm to 300 µm, whichresults in reduced sensitivity at wavelengths larger than950 nm. With a typical chip thickness of 250 µm, an efficiencyof about 35 % at 1060 nm is achieved. At shorterwavelengths (blue-near UV, 500 nm to 300 nm) sensitivity islimited by recombination effects near the surface of thesemiconductor. A reduction in efficiency starts near 500 nmand increases as the wavelength decreases. Standarddetectors designed for visible and near IR radiation mayhave poor UV/blue sensitivity and poor UV stability. Welldesigned sensors for wavelengths of 300 nm to 400 nm canoperate with fairly high efficiencies. At shorter wavelengths(< 300 nm), efficiency decreases strongly.
Fig. 13 - Spectral Responsivity as a Function of Wavelength of a Si Photodetector Diode, Ideal and Typical Values
Temperature dependence of spectral responsivity
The efficiency of carrier generation by absorption and theloss of carriers by recombination are the factors whichinfluence spectral responsivity. The absorption coefficientincreases with temperature. The radiation of the longwavelength is therefore more efficiently absorbed inside thebulk and results in increased response. For shorterwavelengths (< 600 nm), reduced efficiency is observed withincreasing temperature because of increased recombinationrates near the surface. These effects are strongly dependenton technological parameters and therefore cannot begeneralized to the behavior at longer wavelengths.
Uniformity of spectral responsivity
Inside the technologically defined active area ofphotodiodes, spectral responsivity shows a variation ofsensitivity on the order of < 1 %. Outside the defined activearea, and especially at lateral edges of the chips, localspectral response is sensitive to applied reverse voltage.Additionally, this effect depends on wavelength. Therefore,the relation between power (W) related spectral responsivity,sλ (A/W), and power density (W/cm2) related spectralresponsivity, sλ [A/(W/cm2)] is not a constant. Rather, thisrelation is a function of wavelength and reverse bias
Stability of spectral responsivity
Si detectors for wavelengths between 500 nm and 800 nmappear to be stable over very long periods of time. In theliterature concerned here, remarks can be found oninstabilities of detectors in blue, UV, and near IR undercertain conditions. Thermal cycling reversed the degradationeffects.Surface effects and contamination are possible causes butare technologically well controlled.
Angular dependence of responsivity
The angular response of Si photodiodes is given by theoptical laws of reflection. The angular response of a detectoris shown in figure 14.
Ire η N× q×=
sλ Ire φe⁄=
η N× q h ν× N×( ) η q h ν×( )⁄×=⁄×=
sλλ μm( )1.24
----------------- A W⁄[ ]=
400 600 800 10000
0.2
0.4
0.6
0.8
1.0
Spe
ctra
lRes
pons
itivi
ty(A
/W)
Wavelength (nm)
1200
94 8602
Physics and TechnologyPhysics and Technology Vishay Semiconductors
Document Number: 80086 For technical questions concerning emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.0, 26-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 25
Fig. 14 - Responsivity of Si Photodiodes as a Function of the Angle of Incidence
Semiconductor surfaces are covered with quarterwavelength anti-reflection coatings. Encapsulation isperformed with uncoated glass or sapphire windows.The bare silicon response can be altered by optical imagingdevices such as lenses. In this way, nearly every arbitraryangular response can be achieved.
Dynamic Properties of Si Photodiodes
Si photodiodes are available in many different variations.The design of diodes can be tailored to meet special needs.Si photodiodes may be designed for maximum efficiency atgiven wavelengths, for very low leakage currents, or for highspeed. The design of a photodiode is nearly always acompromise between various aspects of a specification.Inside the absorbing material of the diode, photons can beabsorbed in different regions. For example at the top of ap+n--diode there is a highly doped layer of p+ - Si. Radiationof shorter wavelengths will be effectively absorbed, but forlarger wavelengths only a small amount is absorbed. In thevicinity of the pn junction, there is the space charge region,where most of the photons should generate carriers. Anelectric field accelerates the generated carrier in this part ofthe detector to a high drift velocity. Carriers which are notabsorbed in these regions penetrate into field-free regionwhere the motion of the generated carriers fluctuates by aslow diffusion process.The dynamic response of the detector is composed ofdifferent processes which transport carriers to contacts. Thedynamic response of photodiodes is influenced by threefundamental effects:
• Drift of carriers in an electric field
• Diffusion of carriers
• Capacitance x load resistance
Carrier drift in the space charge region occurs rapidly withvery small time constants. Typically, transit times in anelectric field of 0.6 V/µm are on the order of 16 ps/µm and50 ps/µm for electrons and holes, respectively. At(maximum) saturation velocity, the transit time is on the order
of 10 ps/µm for electrons in p-material. With a 10 µm driftregion, travelling times of 100 ps can be expected. Responsetime is a function of the distribution of the generated carriersand is therefore dependent on wavelength.The diffusion of the carriers is a very slow process. Timeconstants are on the order of some ms. The typical pulseresponse of the detectors is dominated by these twoprocesses. Obviously, carriers should be absorbed in largespace charge regions with high internal electrical fields. Thisrequires material with an adequate low doping level.Furthermore, a reverse bias of rather large voltage is useful.Radiation of shorter wavelength is absorbed in smallerpenetration depths. At wavelengths shorter than 600 nm,decreasing wavelength leads to an absorption in the diffusedtop layer. The movement of carriers in this region is alsodiffusion limited. Because of the small carrier lifetimes, thetime constants are not as large as in homogeneous substratematerial.Finally, capacitive loading of output in combination with loadresistance limits frequency response.
PROPERTIES OF SILICON PHOTOTRANSISTORSThe phototransistor is equivalent to a photodiode inconjunction with a bipolar transistor amplifier (figure 15).Typically, the current amplification, B, is between 100 and1000 depending on type and application. The active area ofphototransistor is usually about 0.5 x 0.5 mm2.The data of spectral responsivity are equivalent to those ofphotodiodes, but must be multiplied by the factor currentamplification, B.
Fig. 15 - Phototransistor, Cross Section and Equivalent Circuit
The switching times of phototransistors are dependent oncurrent amplification and load resistance and are between30 ms and 1 ms. The resulting cut-off frequencies are a fewhundred kHz.
0 0.2 0.4 0.6 0.8
0° 30°
60°
90°- 30°- 60°- 90°
0
0.2
0.4
0.6
0.8
1.0
Angle Relative Responsitivity
A/W
Acm2/W
94 8603
Emitter
n+
Base
Antireflection coating
Metallization Isolation
Collector
n
Backside contact
EA
pn
94 8605
www.vishay.com For technical questions concerning emitters, contact: emittertechsupport@vishay.com Document Number: 8008626 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.0, 26-Aug-08
Physics and TechnologyVishay Semiconductors Physics and Technology
The transit times, tr and tf, are given by
(10)
ft: Transit frequency
R: Load resistance, 1.6
CB: Base-collector capacitance, b= 4 to 5
V: Amplification
Phototransistors are most frequently applied in transmissiveand reflective optical sensors.
tr f, 1 2ft2⁄( )
2b RCBV( )2+=
Document Number: 80085 For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 27
Measurement Techniques
Measurement TechniquesVishay Semiconductors
INTRODUCTIONThe characteristics of optoelectronics devices given indatasheets are verified either by 100 % production testsfollowed by statistic evaluation or by sample tests on typicalspecimens. These tests can be divided into followingcategories:
• Dark measurements
• Light measurements
• Measurements of switching characteristics, cut-offfrequency and capacitance
• Angular distribution measurements
• Spectral distribution measurements
• Thermal measurements
Dark and light measurements limits are 100 %measurements. All other values are typical. The basiccircuits used for these measurements are shown in thefollowing sections. The circuits may be modified slightly toaccommodate special measurement requirements.Most of the test circuits may be simplified by use of a sourcemeasure unit (SMU), which allows either to source voltageand measure current or to source current and measurevoltage.
DARK AND LIGHT MEASUREMENTSEMITTER DEVICESIR Diodes (GaAs)
Forward voltage, VF, is measured either on a curve tracer orstatically using the circuit shown in figure 1. A specifiedforward current (from a constant current source) is passedthrough the device and the voltage developed across it ismeasured on a high-impedance voltmeter.
Fig. 1
To measure reverse voltage, VR, a 10 µA or 100 µA reversecurrent from a constant current source is impressed throughthe diode (figure 2) and the voltage developed across ismeasured on a voltmeter of high input impedance (≥ 10 MΩ).
Fig. 2
For most devices, VR is specified at 10 µA reverse current. Inthis case either a high impedance voltmeter has to be used,or current consumption of DVM has to be calculated andadded to the specified current. A second measurement stepwill then give correct readings.In case of GaAs IR diodes, total radiant output power, Φe, isusually measured. This is done with a calibrated large-areaphotovoltaic cell fitted in a conical reflector with a bore whichaccepts the test item - see figure 3. An alternative test setuses a silicon photodiode attached to an integrating sphere.A constant DC or pulsating forward current of specifiedmagnitude is passed through the IR diode. The advantage ofpulse-current measurements at room temperature (25 °C) isthat results can be reproduced exactly.
Fig. 3
If, for reasons of measurement economy, only DCmeasurements (figure 4) are to be made, then the energizingtime should be kept short (below 1 s) and of uniform duration,to minimize any fall-off in light output due to internal heating.
VS = 5 V
Ri > 10 kΩ
V
VF
I = 50 mA100 mA
constant
948205
VS = 80 V( > VR max.)
Ri > 10 MΩ
V
VR
I = 10 µA100 µAconstant
94 8206
IF
Photo Voltaic Cell, Calibrated
Reflector
94 8155
www.vishay.com For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com Document Number: 8008528 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Measurement TechniquesVishay Semiconductors Measurement Techniques
Fig. 4
To ensure that the relationship between irradiance andphotocurrent is linear, the photodiode should operate nearthe short-circuit configuration. This can be achieved by usinga low resistance load (≤ 10 Ω) of such a value that thevoltage dropped across is very much lower than the opencircuit voltage produced under identical illuminationconditions (Rmeas << Ri). The voltage across the load shouldbe measured with a sensitive DVM.A knowledge of radiant intensity, Ie, produced by an IRemitter enables customers to assess the range of IR lightbarriers. The measurement procedure for this is more or lessthe same as the one used for measuring radiant power. Theonly difference is that in this case the photodiode is usedwithout a reflector and is mounted at a specified distancefrom, and on the optical axis of, the IR diode (figure 5). Thisway, only the radiant power of a narrow axial beam isconsidered.The radiant power within a solid angle of Ω = 0.01 steradian(sr) is measured at a distance of 100 mm. Radiant intensityis then obtained by using this measured value for calculatingthe radiant intensity for a solid angle of Ω = 1 sr.
Fig. 5
DETECTOR DEVICESPhotovoltaic cells, photodiodes
• Dark measurements
The reverse voltage characteristic, VR, is measured either ona curve tracer or statically using the circuit shown in figure 6.A high-impedance voltmeter, which draws only an insignificantfraction of device’s reverse current, must be used.
Fig. 6
Dark reverse current measurements, Iro, must be carried outin complete darkness - reverse currents of silicon photodiodesare in the range of nanoamperes only, and an illumination of afew lx is quite sufficient to falsify the test result. If a highlysensitive DVM is to be used, then a current sampling resistorof such a value that voltage dropped across it is small incomparison with supply voltage must be connected in serieswith the test item (figure 7). Under these conditions, anyreverse voltage variations of the test samples can be ignored.Shunt resistance (dark resistance) is determined by applyinga very slight voltage to the photodiode and then measuringdark current. In case of 10 mV or less, forward and reversepolarity will result in similar readings.
Fig. 7
• Light measurements
The same circuit as used in dark measurement can be usedto carry out light reverse current, Ira, measurements onphotodiodes. The only difference is the diode is nowirradiated and a current sampling resistor of lower value mustbe used (figure 8), because of the higher currents involved.
VS = 5 V
Ri ≥ 10 kΩ
V
I = 100 mAconstant
RL = 1 Ω to 10 Ω
RL
Ik
94 8207
Position of the Emitting Area
a = 100 mm
= 0.01 sr
Photo Voltaic Cell with Filter (Calibrated), 1 cm 2
94 8156
Ω
Ri
V
VF
IR = 100 µAconstant
94 8209
≥ 10 MΩ
E = 0
VS > VR
VS = 20 V
Ri ≥ 1 MΩ
mV10 kΩ
Iro
94 8210
E = 0
Document Number: 80085 For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 29
Measurement TechniquesMeasurement Techniques Vishay Semiconductors
Fig. 8
The open circuit voltage, VO, and short circuit current, Ik, ofphotovoltaic cells and photodiodes are measured by meansof the test circuit shown in figure 9. The value of the loadresistor used for the Ik measurement should be chosen sothat the voltage dropped across it is low in comparison withthe open circuit voltage produced under conditions ofidentical irradiation.
Fig. 9
The light source used for the light measurements is acalibrated incandescent tungsten lamp with no filters. The filament current is adjusted for a color temperature of2856 K (standard illuminant A to DIN 5033 sheet 7). Aspecified illumination, Ev, (usually 100 lx or 1000 lx) isproduced by adjusting the distance, a, between the lamp anda detector on an optical bench. Ev can be measured on aV(λ)-corrected luxmeter, or, if luminous intensity, Iv, of thelamp is known, Ev can be calculated using the formula:Ev = Iv/a2.It should be noted that this inverse square law is only strictlyaccurate for point light sources, that is for sources where thedimensions of the source (the filament) are small (≤ 10 %) incomparison with the distance between the source anddetector.Since lux is a measure for visible light only, near-infraredradiation (800 nm to 1100 nm) where silicon detectors havetheir peak sensitivity is not taken into account. Unfortunately,the near-infrared emission of filament lamps of variousconstruction varies widely. As a result, light current
measurements carried out with different lamps (but the samelux and color temperature calibration) may result in readingsthat differ up to 20 %.The simplest way to overcome this problem is to calibrate(measure the light current) some items of a photodetectortype with a standard lamp (OSRAM WI 41/G) and then usethese devices for adjustment of the lamp used for fieldmeasurements.An IR diode is used as a radiation source (instead of aTungsten incandescent lamp), to measure detector devicesbeing used mainly in IR transmission systems together withIR emitters (e.g., IR remote control, IR headphone).Operation is possible both with DC or pulsed current.The adjustment of irradiance, Ee, is similar to the abovementioned adjustment of illuminance, Ev. To achieve a highstability similar to filament lamps, consideration should begiven to the following two points:
• The IR emitter should be connected to a good heat sink toprovide sufficient temperature stability.
• DC or pulse-current levels as well as pulse duration havegreat influence on self-heating of IR diodes and should bechosen carefully.
• The radiant intensity, Ie, of the device is permanentlycontrolled by a calibrated detector.
Phototransistors
The collector emitter voltage, VCEO, is measured either on atransistor curve tracer or statically using the circuit shown infigure 10. Normal bench illumination does not change themeasured result.
Fig. 10
In contrast, however, the collector dark current, ICEO or ICO,must be measured in complete darkness (figure 11). Evenordinary daylight illumination of the wire fed-through glassseals would falsify the measurement result.
VS = 20 V
Ri = 10 kΩ
mV
EA = 1 klx orEe = 1 mW/cm2
10 Ω
Ira
94 8211
Ri ≥ 10 MΩ
mV
EA = 1 klx orEe = 1 mW/cm2
1 Ω to 10 Ω
Ik VO
94 8212
Ri ≥ 1 MΩ
V
VCEO
IC = 1 mAconstant
VS = 80 V
94 8213
( < VCEO )
E < 100 lx
www.vishay.com For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com Document Number: 8008530 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Measurement TechniquesVishay Semiconductors Measurement Techniques
Fig. 11
The same circuit is used for collector light current, Ica,measurements (figure 12). The optical axis of the device isaligned to an incandescent tungsten lamp with no filters,producing a CIE illuminance A of 100 lx or 1000 lx with acolor temperature of Tf = 2856 K. Alternatively an IRirradiance by a GaAs diode can be used (refer to thephotovoltaic cells and photodiodes section). Note that alower sampling resistor is used, in keeping with the highercurrent involved.
Fig. 12
To measure collector emitter saturation voltage, VCEsat, thedevice is illuminated and a constant collector current ispassed through. The magnitude of this current is adjustedbelow the level of the minimum light current, Ica min, for thesame illuminance (figure 13). The saturation voltage of thephototransistor (approximately 100 mV) is then measured ona high impedance voltmeter.
Fig. 13
SWITCHING CHARACTERISTICSDefinition
Each electronic device generates a certain delay betweeninput and output signals as well as a certain amount ofamplitude distortion. A simplified circuit (figure 14) showshow input and output signals of optoelectronic devices canbe displayed on a dual-trace oscilloscope.
Fig. 14
The switching characteristics can be determined bycomparing the timing of output current waveform with theinput current waveform (figure 15).
Ri = 1 MΩ
ICO
VS = 20 V
10 kΩ mV
94 8214
E = 0
Ri ≥ 10 kΩ
Ica
VS = 5 V
Ee = 1 mW/cm2 orEA = 1 klx
1 Ω to 10 Ω mV
94 8215
Ri ≥ 1 MΩ
V
VCEsat
IC = constant
VS = 5 V
Ee = 1 mW/cm2 orEA = 1 klx
94 8216
VS
Channel I Channel II
GaAs-Diode
IF
Channel II
VSChannel II
94 8219
Document Number: 80085 For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 31
Measurement TechniquesMeasurement Techniques Vishay Semiconductors
Fig. 15
These time parameters also include the delay existing in aluminescence diode between forward current (IF) and radiantpower Φe).
Notes Concerning the Test Set-up
Circuits used for testing IR emitting, emitting sensitive andoptically coupled isolator devices are basically the same(figure 14). The only difference is the way in which testdevice is connected to the circuit.It is assumed that rise and fall times associated with thesignal source (pulse generator) and dual trace oscilloscopeare insignificant, and that the switching characteristics of anyradiant sensitive device used in set-up are considerablyshorter than those of the test item. The switchingcharacteristics of IR emitters, for example(tr ≈ 10 ns to 1000 ns), are measured with aid of a PINPhotodiode detector (tr ≈ 1 ns).Photo- and darlington transistors and photo- and solar cells(tr ≈ 0.5 µs to 50 µs) are, as a rule, measured by use of fastIR diodes (tr < 30 ns) as emitters.Red light-emitting diodes are used as light sources only fordevices which cannot be measured with IR diodes becauseof their spectral sensitivity (e.g. BPW21R). These diodesemit only 1/10 of radiant power of IR diodes andconsequently generate only very low signal levels.
Switching Characteristic Improvements onPhototransistors and Darlington Phototransistors
As in any ordinary transistor, switching times are reduced ifdrive signal level, and hence collector current, is increased.Another time reduction (especially in fall time tf) can beachieved by use of a suitable base resistor, assuming thereis an external base connection, although this can only bedone at the expense of sensitivity.
TECHNICAL DESCRIPTION - ASSEMBLYEmitter
Emitters are manufactured using the most modern liquidphase epitaxy (LPE) process. By using this technology, thenumber of undesirable flaws in the crystal is reduced. Thisresults in a higher quantum efficiency and thus higherradiation power. Distortions in the crystal are prevented byusing mesa technology which leads to lower degradation. Afurther advantage of the mesa technology is that eachindividual chip can be tested optically and electrically, evenon the wafer.
DETECTORVishay Semiconductor detectors have been developed tomatch perfectly to emitters. They have low capacitance, highphotosensitivity, and extremely low saturation voltage.Silicon nitride passivation protects surface against possibleimpurities.
Assembly
Components are fitted onto lead frames by fully automaticequipment using conductive epoxy adhesive. Contacts areestablished automatically with digital pattern recognitionusing well-proven thermosonic techniques. All componentare measured according to the parameter limits given in thedatasheet.
Applications
Silicon photodetectors are used in manifold applications,such as sensors for radiation from near UV over visible tonear infrared. There are numerous applications inmeasurement of light, such as dosimetry in UV, photometry,and radiometry. A well known application is shutter control incameras.Another large application area for detector diodes, andespecially phototransistors, is position sensing.Examples are differential diodes, optical sensors, and reflexsensors.
Other types of silicon detectors are built-in as parts ofoptocouplers.One of the largest application areas is remote control of TVsets and other home entertainment appliances.Different applications require specialized detectors and alsospecial circuits to enable optimized functioning.
t p t
t
0
010 %
90 %
100 %
t r
t d
t on
t st f
t off
I F
IC
tp Pulse durationtd Delay timetr Rise timeton (= td + tr) Turn-on time
ts Storage timet f Fall timetoff (= ts + tf) Turn-off time
96 11698
www.vishay.com For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com Document Number: 8008532 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Measurement TechniquesVishay Semiconductors Measurement Techniques
Equivalent circuit
Photodetector diodes can be described by the electricalequivalent circuit shown in figure 16.
Fig. 16
(1)
(2)
As described in the chapter “I-V Characteristics ofilluminated pn junction”, the incident radiation generates aphotocurrent loaded by a diode characteristic and loadresistor, RL. Other parts of the equivalent circuit (parallelcapacitance, C, combined from junction, Cj, and straycapacitances, serial resistance, RS, and shunt resistance,Rsh, representing an additional leakage) can be neglected inmost standard applications, and are not expressed inequations 5 and 7 (see “Physics and Technology”).However, in applications with high frequencies or extremeirradiation levels, these parts must be regarded as limitingelements.
Searching for the right detector diode typeThe BPW 20 RF photodiode is based on rather highly dopedn-silicon, while BPW34 is a PIN photodiode based on verylightly doped n-silicon. Both diodes have the same activearea and spectral response as a function of wavelength isvery similar. These diodes differ in their junction capacitanceand shunt resistance. Both can influence the performance ofan application.Detecting very small signals is the domain of photodiodeswith their very small dark currents and dark/shuntresistances.With a specialized detector technology, these parametersare very well controlled in all Vishay photodetectors.The very small leakage currents of photodiodes are offset byhigher capacitances and smaller bandwidths in comparisonto PIN photodiodes.Photodiodes are often operated in photovoltaic mode,especially in light meters. This is depicted in figure 17, where
a strong logarithmic dependence of the open circuit voltageon the input signal is used.
Fig. 17 - Photodiode in the Photovoltaic Mode Operating with a Voltage Amplifier
with (3)
(2)
It should be noted that extremely high shunt/dark resistance(more than 15 GΩ) combined with a high-impedanceoperational amplifier input and a junction capacitance ofabout 1 nF can result in slow switch-off time constants ofsome seconds. Some instruments therefore have a resetbutton for shortening the diode before starting ameasurement.The photovoltaic mode of operation for precisemeasurements should be limited to the range of low ambienttemperatures, or a temperature control of the diode(e.g., using a Peltier cooler) should be applied. At hightemperatures, dark current is increased (see figure 18)leading to a non-logarithmic and temperature dependentoutput characteristic (see figure 19). The curves shown infigure 18 represent typical behavior of these diodes.Guaranteed leakage (dark reverse current) is specified withIro = 30 nA for standard types. This value is far from that onewhich is typically measured. Tighter customer specificationsare available on request. The curve shown in figure 19 showthe open circuit voltage as a function of irradiance with darkreverse current, IS, as a parameter (in a first approximationincreasing IS and Ish have the same effect). The parametershown covers the possible spread of dark current. Incombination with figure 18 one can project the extremedependence of the open circuit voltage at high temperatures(figure 20).
Rsh
Rs
RL
Ish
Iph
Id
VD V0
I0
94 8606
IO Iph ID– Ish–=
IO Iph IsqVD
kT-----------exp 1–⎝ ⎠
⎛ ⎞– Ish–=
VOC VT
s λ( ) φe Ish–×Is
------------------------------------- 1+⎝ ⎠⎛ ⎞ln×=
R2
R1
V0
94 8607
VO VOC 1 R1 R2⁄+[ ]×≈
VOC VT s λ( ) φe Is⁄ 1+×( )ln×=
Document Number: 80085 For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 33
Measurement TechniquesMeasurement Techniques Vishay Semiconductors
Fig. 18 - Reverse Dark Current vs. Temperature
Fig. 19 - Open Circuit Voltage vs. Irradiance, Parameter: Dark Reverse Current, BPW20RF
Fig. 20 - Open Circuit Voltage vs. Temperature, BPW46
Operating modes and circuits
The advantages and disadvantages of operating aphotodiode in open circuit mode have been discussed.For operation in short circuit mode (see figure 21) orphotoconductive mode (see figure 22), current-to-voltageconverters are typically used. In comparison withphotovoltaic mode, the temperature dependence of theoutput signal is much lower. Generally, the temperaturecoefficient of the light reverse current is positive forirradiation with wavelengths > 900 nm, rising with increasingwavelength. For wavelengths < 600 nm, a negativetemperature coefficient is found, likewise with increasingabsolute value to shorter wavelengths.Between these wavelength boundaries the output is almostindependent of temperature. By using this mode ofoperation, the reverse biased or unbiased (short circuitconditions), output voltage, VO, will be directly proportional toincident radiation, φe (see equation in figure 21).
Fig. 21 - Transimpedance Amplifier, Current to Voltage Converter, Short Circuit Mode
(4)
(5)
Fig. 22 - Transimpedance Amplifier, Current to Voltage Converter, Reverse Biased Photodiode
The circuit in figure 21 minimizes the effect of reverse darkcurrent while the circuit in figure 22 improves the speed of thedetector diode due to a wider space charge region withdecreased junction capacitance and field increased velocityof the charge carrier transport.
- 20 20 60 100 140
Cur
rent
(nA
)
Temperature (°C)94 8608
0
107
101
103
105
Reverse Bias Voltage Vr = 20 V BPW24R
BPW20RF
10-1
0.01 0.1 1000
100
200
300
400
Ope
n C
ircui
t Vol
tage
(m
V)
Irradiance (µW)
1000
94 8609
10 pA
100 pA
5 nA
1 nA
30 nA
1 10
0
100
200
300
400
Ope
n C
ircui
t Vol
tage
(m
V)
Temperature (°C)
100
94 8610
0 20 40 60 80
R
V0
94 8611
VO R Φe× s λ( )×–=
VO Isc R×–=
R
V0
Vb
94 8612
www.vishay.com For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com Document Number: 8008534 For technical questions concerning detectors, contact: detectortechsupport@vishay.com Rev. 1.3, 27-Aug-08
Measurement TechniquesVishay Semiconductors Measurement Techniques
Fig. 23 - RC-Loaded Photodiode with Voltage Amplifier
Figure 23 shows photocurrent flowing into an RC load, whereC represents junction and stray capacity while R3 can be areal or complex load, such as a resonant circuit for theoperating frequency.
Fig. 24 - AC-Coupled Amplifier Circuit
(6)
The circuit in figure 24 is equivalent to figure 23 with achange to AC coupling. In this case, the influence ofbackground illumination can be separated from a modulatedsignal. The relation between input signal (irradiation, φe) andoutput voltage is given by the equation in figure 24.
Frequency response
The limitations of switching times in photodiodes aredetermined by carrier lifetime. Due to the absorptionproperties of silicon, especially in photodiodes, most ofincident radiation at longer wavelengths is absorbed outsidethe space charge region. Therefore, a strong wavelengthdependence of the switching times can be observed(figure 25).
Fig. 25 - Switching Times vs. Wavelength for Photodiode BPW20RF
A drastic increase in rise and fall times is observed atwavelengths > 850 nm. Differences between unbiased andbiased operation result from the widening of the spacecharge region.However, for PIN photodiodes (BPW34/TEMD5000 family)similar results with shifted time scales are found. An exampleof such behavior, in this case in the frequency domain, ispresented in figure 26 for a wavelength of 820 nm andfigure 27 for 950 nm.
Fig. 26 - BPW34, TEMD5010X01, Bandwidth vs.Reverse Bias Voltage, Parameter: Load Resistance, λ = 820 nm
V0
R2
R1R3
Vb
C
94 8613
V0
R2
R1R3
Vb
C1
C2
94 8614
VO φe s λ( ) R× 3 1 R1 R2⁄+[ ]××≈
0
5
10
15
20
25
30
Wavelength (nm)550 600 650 700 750 800 850 900 950
Ris
e T
ime
t r, F
all T
ime
t f (µ
s)
948615
tr = 0 V tf = 0 V
tf = - 10 Vtr = - 0 V
0
2
4
6
8
12
Rev
erse
Bia
s (V
)
94 8616
10
104 106105 108107
RL =
50 Ω
100 kΩ
10 kΩ
1 kΩ
- 3 dB - Bandwidth (Hz)
Document Number: 80085 For technical questions concerning IR emitters, contact: emittertechsupport@vishay.com www.vishay.comRev. 1.3, 27-Aug-08 For technical questions concerning detectors, contact: detectortechsupport@vishay.com 35
Measurement TechniquesMeasurement Techniques Vishay Semiconductors
Fig. 27 - BPW41, TEMD5110X01, Bandwidth vs.Reverse Bias Voltage, Parameter: Load Resistance λ = 950 nm
Below about 870 nm, only slight wavelength dependencecan be recognized, while a steep change of cut-off frequencytakes place from 870 nm to 950 nm (different time scales infigure 26 and figure 27). Additionally, the influence of loadresistances and reverse bias voltages can be taken fromthese diagrams.
For cut-off frequencies greater than 10 MHz to 20 MHz,depending on the supply voltage available for biasing thedetector diode, PIN photodiodes are also used. However, forthis frequency range, and especially when operating with lowbias voltages, thin epitaxially grown intrinsic (i) layers areincorporated into PIN photodiodes.As a result, these diodes (e.g., Vishay’s TESP5700) canoperate with low bias voltages (3 V to 4 V) with cut-offfrequencies of 300 MHz at a wavelength of 790 nm. Withapplication-specific optimized designs, PIN photodiodes withcut-off frequencies up to 1 GHz at only a 3 V bias voltage withonly an insignificant loss of responsivity can be generated.The main applications for these photodiodes are found inoptical local area networks operating in the first opticalwindow at wavelengths of 770 nm to 880 nm.
WHICH TYPE FOR WHICH APPLICATION?In table 1, selected diode types are assigned to differentapplications. For more precise selection according to chipsizes and packages, refer to the tables in introductory pagesof this data book.
PHOTOTRANSISTOR CIRCUITSA phototransistor typically operates in a circuit shown infigure 28. Resistor RB can be omitted in most applications. Insome phototransistors, the base terminal is not connected.RB can be used to suppress background radiation by settinga threshold level (see equation 7 and 8)
VO = VS - B × φe × s(λ) × RL (7)
VO ≈ VS - (B × φe × s(λ) - 0.6/RB) × RL (8)
For the dependence of rise and fall times on load resistanceand collector-base capacitance, see the chapter “Propertiesof Silicon Phototransistors”.
Fig. 28 - Phototransistor with Load Resistor andOptional Base Resistor
0
2
4
6
8
12
Rev
erse
Bia
s (V
)
94 8617
10
10 105104 107106
10 kΩ
50 Ω
1 kΩ
100 kΩ
RL = 1 MΩ
3
- 3 dB - Bandwidth (Hz)
TABLE 1 - PHOTODIODE REFERENCE TABLE
DETECTOR APPLICATION PIN PHOTODIODE PHOTODIODEEPI PIN
PHOTODIODE
Photometry, light meter BPW21R
Radiometry TEMD5010X01, BPW34, BPW24R, ... BPW20RF
Light barriers BPV10NF, BPW24R
Remote control, IR filter included, λ > 900 nm BPV20F, BPV23F, BPW41N, S186P, TEMD5100X01
IR Data Transmission fc < 10 MHz IR filter included, λ > 820 nm
BPV23NF, BPW82, BPW83, BPV10NF, TEMD1020, TEMD5110X01
IR Data Transmission, fc > 10 MHz, no IR filter BPW34, BPW46, BPV10, TEMD5010X01 TESP5700
Densitometry BPW34, BPV10, TEMD5010X01 BPW20RF, BPW21R
Smoke detector BPV22NF, BPW34, TEMD5010X01
RL
Vs
RB
V0
94 8618
Legal Disclaimer Noticewww.vishay.com Vishay
Revision: 12-Mar-12 1 Document Number: 91000
DisclaimerALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose orthe continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and allliability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particularpurpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typicalrequirements that are often placed on Vishay products in generic applications. Such statements are not binding statementsabout the suitability of products for a particular application. It is the customer’s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use in a particular application. Parametersprovided in datasheets and/or specifications may vary in different applications and performance may vary over time. Alloperating parameters, including typical parameters, must be validated for each customer application by the customer’stechnical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainingapplications or for any other application in which the failure of the Vishay product could result in personal injury or death.Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agreeto fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses anddamages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishayor its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel toobtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or byany conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category PolicyVishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill thedefinitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Councilof June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm thatall the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
top related