bundle and save on direct-to-garment printing! $3,995 · $3,995. roland bt-12 + 2 hb-12 finisher...
Post on 17-Apr-2020
9 Views
Preview:
TRANSCRIPT
MARCH 2020
SOLUTIONS & $AVINGS FOR YOUR SUCCESS
Promotional pricing cannot be combined with any other offer. Valid dates: March 1 – 31, 2020.
CAP BACKING & FOAM10% OFF METT3020-4250
15% OFFAMN3Dxxxx, 3mm Foam
BUNDLE AND SAVE ON DIRECT-TO-GARMENT PRINTING!
$3,995ROLAND BT-12 + 2 HB-12 finisher units + 4 cassette trays
Call branch for more information!
ZSK SPRINT 7L$19,900
NEW! SISERTWINKLEBrand-new glimmering HTV by Siser®. Twinkle’s flakes have reflective properties that give off a unique shine when exposed to direct light. Flakes are embedded for a smooth finish . Available in six colors.SISTW**-20
Royal Blue Navy Red
Fuchsia Gold Silver
EPSON SURECOLOR F9470HDye-sublimation inkjet printer with fluorescent pink andyellow ink for exceptional color saturation and brightness.
Call the branch for pricing.
We are invested in you! We offer over 65 classes focused
on education and training.
Visit GSGU.training to register for a class near you!
Screen CoatingA lack of stencil thickness is the number one fail point for many printers. If you cannot feel the image area on the substrate side of the screen, ink will not lay down properly.
Emulsion Over Mesh (EOM) is the emulsion thickness on the substrate side of the mesh in relation to the mesh. If the EOM is too low, it will prevent the necessary seal for image details. If too high, ink will be difficult to transfer.
Use the round scoop edge to apply a proper coat of emulsion. Start with the substrate side, and finish on the print side. If using the sharp edge scoop, be careful as it can scrape off too much emulsion. Finally, dry the screens horizontally with the print side down.
Proper Mesh SelectionMesh selection has a significant effect on coverage and image detail.
Mesh size is the number of threads per square inch. The higher the number, the finer the threads and screen holes. 110 is most commonly used for underbases.
Select a lower mesh count if the project requires a heavy underbase. If the design has significant detail, a higher mesh may be needed.
Promotional pricing cannot be combined with any other offer. Valid dates: March 1 – 31, 2020.
Press Set Up• Pressure: Even pressure
between 25 and 40 psi• Squeegee Angle: 15 to 20
degrees• Speed: Most inks are
formulated for high production, so slower is no longer better.
• Squeegee Durometer: 60/90/60 durometer is standard for white underbases
Flash Temperatures and Time With the proper ink thickness, only a quick flash is needed. Most white inks will flash at 265 degrees in about 1.5 to 3 seconds, leading to faster production times.
Cure Time and TemperatureAlways reference the ink manufacturers recommendations for different material types. If an ink is low cure, it can cure at a much lower temperature than standard inks. Do your research and always test your curing temperatures for the best results.
NEW! LOW CURE COLORS Low cure, smooth surface matte finish ink designed for high production. Great quality at an outstanding price.
$69 Gallon, VORTEXLC**
Super GoldSGO
National RedNR
M&R GENESIS MANUAL PRESSUnleash your printing abilities with the proven quality and precision of M&R. With the Genesis you can produce high-quality prints at an unheard of low price.
$620 PressMRPGENESIS
$155 Stand MRPAOPT-GEN-STAND
WILFLEX EPIC BOLT LC WHITEPremium low-bleed, low cure white ink that delivers superior printability and a bright smooth finish. Fast flash making it ideal for high production shops.
10% OFF WILLCBOLT-01
Bears NavyBN
Light RoyalLR
Dallas Scarlet
DS
Navy BlueNB
Dolphin Orange
DO
Dark GrayDG
Lemon Yellow
LY
Dallas Green
DG
WhiteWH
BlackBK
10% OFF
BBC LITTLE BUDDY II DRYERCure 100+ shirts an hour with this compact, lightweight and portable conveyor dryer.
$2,155 BBCLB15-2000HC
SAVE ON 1, SAVE BIG ON 2 VORTEX INKJET FILMFast drying, 5-mil thick, waterproof inkjet film.
$49when you buy 2+ or $59 each17” x 100’, 2” core VORIJFILM-17100
$69when you buy 2+ or $79 each
24” x 100’, 2” core VORIJFILM-24100
OPTIMIZING WHITE INK
EASISOLV 701 SCREEN WASH & STAIN REMOVER$41.41 EAS701-01
ULANO TRIFECTAReady-to-use, extremely fast exposing, violet-colored SBQ-dual cure direct emulsion.
$58.34 ULA485-01
50 COLORS AVAILABLE!
Starting at only
NEW!
Screen CoatingA lack of stencil thickness is the number one fail point for many printers. If you cannot feel the image area on the substrate side of the screen, ink will not lay down properly.
Emulsion Over Mesh (EOM) is the emulsion thickness on the substrate side of the mesh in relation to the mesh. If the EOM is too low, it will prevent the necessary seal for image details. If too high, ink will be difficult to transfer.
Use the round scoop edge to apply a proper coat of emulsion. Start with the substrate side, and finish on the print side. If using the sharp edge scoop, be careful as it can scrape off too much emulsion. Finally, dry the screens horizontally with the print side down.
Proper Mesh SelectionMesh selection has a significant effect on coverage and image detail.
Mesh size is the number of threads per square inch. The higher the number, the finer the threads and screen holes. 110 is most commonly used for underbases.
Select a lower mesh count if the project requires a heavy underbase. If the design has significant detail, a higher mesh may be needed.
Promotional pricing cannot be combined with any other offer. Valid dates: March 1 – 31, 2020.
Press Set Up• Pressure: Even pressure
between 25 and 40 psi• Squeegee Angle: 15 to 20
degrees• Speed: Most inks are
formulated for high production, so slower is no longer better.
• Squeegee Durometer: 60/90/60 durometer is standard for white underbases
Flash Temperatures and Time With the proper ink thickness, only a quick flash is needed. Most white inks will flash at 265 degrees in about 1.5 to 3 seconds, leading to faster production times.
Cure Time and TemperatureAlways reference the ink manufacturers recommendations for different material types. If an ink is low cure, it can cure at a much lower temperature than standard inks. Do your research and always test your curing temperatures for the best results.
NEW! LOW CURE COLORS Low cure, smooth surface matte finish ink designed for high production. Great quality at an outstanding price.
$69 Gallon, VORTEXLC**
Super GoldSGO
National RedNR
M&R GENESIS MANUAL PRESSUnleash your printing abilities with the proven quality and precision of M&R. With the Genesis you can produce high-quality prints at an unheard of low price.
$620 PressMRPGENESIS
$155 Stand MRPAOPT-GEN-STAND
WILFLEX EPIC BOLT LC WHITEPremium low-bleed, low cure white ink that delivers superior printability and a bright smooth finish. Fast flash making it ideal for high production shops.
10% OFF WILLCBOLT-01
Bears NavyBN
Light RoyalLR
Dallas Scarlet
DS
Navy BlueNB
Dolphin Orange
DO
Dark GrayDG
Lemon Yellow
LY
Dallas Green
DG
WhiteWH
BlackBK
10% OFF
BBC LITTLE BUDDY II DRYERCure 100+ shirts an hour with this compact, lightweight and portable conveyor dryer.
$2,155 BBCLB15-2000HC
SAVE ON 1, SAVE BIG ON 2 VORTEX INKJET FILMFast drying, 5-mil thick, waterproof inkjet film.
$49when you buy 2+ or $59 each17” x 100’, 2” core VORIJFILM-17100
$69when you buy 2+ or $79 each
24” x 100’, 2” core VORIJFILM-24100
OPTIMIZING WHITE INK
EASISOLV 701 SCREEN WASH & STAIN REMOVER$41.41 EAS701-01
ULANO TRIFECTAReady-to-use, extremely fast exposing, violet-colored SBQ-dual cure direct emulsion.
$58.34 ULA485-01
50 COLORS AVAILABLE!
Starting at only
NEW!
MARCH 2020
SOLUTIONS & $AVINGS FOR YOUR SUCCESS
Promotional pricing cannot be combined with any other offer. Valid dates: March 1 – 31, 2020.
CAP BACKING & FOAM10% OFF METT3020-4250
15% OFFAMN3Dxxxx, 3mm Foam
BUNDLE AND SAVE ON DIRECT-TO-GARMENT PRINTING!
$3,995ROLAND BT-12 + 2 HB-12 finisher units + 4 cassette trays
Call branch for more information!
ZSK SPRINT 7L$19,900
Royal Blue Navy Red
Fuchsia Gold Silver
EPSON SURECOLOR F9470HDye-sublimation inkjet printer with fluorescent pink and yellow ink for exceptional color saturation and brightness.
Call the branch for pricing.
We are invested in you! We offer over 65 classes focused
on education and training.
Visit GSGU.training to register for a class near you!
Hendendes ad ea nimus, am doles cusae nam, tem et ea que cumqui aut imus aut ant officto dolum con nonecatur simusdae doluptas sequae iur a sit ditiore ptatemp oritisc iusam, uta aut et rati delecab orpore, sit, conserae nestiam utemquam quo excepre, quistExeroresed quide cor am, omnimustrum doloriae sitio. Eriasimin nihilla dolores tiatios et andi adis esequis quatem a
NEW PRODUCT
COMING MARCH 10TH!Check your email and social media for new product details!
top related