ccna 1 v3.0 module 7 ethernet technologies. purpose of this powerpoint this powerpoint primarily...

CCNA 1 v3.0 Module 7Ethernet Technologies

Purpose of This PowerPoint

This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0.It was created to give instructors a PowerPoint to take and modify as their own.This PowerPoint is: NOT a study guide for the module final

assessment. NOT a study guide for the CCNA certification

exam.Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.

To Locate Instructional Resource Materials on Academy Connection:

Go to the Community FTP Center to locate materials created by the instructor communityGo to the Tools sectionGo to the Alpha Preview sectionGo to the Community link under ResourcesSee the resources available on the Class home page for classes you are offeringSearch http://www.cisco.com Contact your parent academy!

Objectives

10-Mbps and 100-Mbps EthernetGigabit and 10-Gigabit Ethernet

Types of Ethernet

Parameters for 10 Mbps Ethernet Operation

10BASE5 Architecture Example

10BASE2 Network Design Limits

10BASE-T Modular Jack Pinouts

10BASE-T Repeated Network Design Limits

Parameters for 100-Mbps Ethernet Operation

100BASE-TX Modular Jack Pinout

1000BASE-FX Pinout

Example of Architecture Configuration and Cable Distances

Parameters for Gigabit Ethernet Operation

Outbound (Tx) 1000Base-T Signal

1000BASE-SX and LX

Gigabit Ethernet Media Comparison

Gigabit Ethernet ArchitectureMaximum 1000BASE-SX Cable Distances

Maximum 1000BASE-LX Cable Distances

Parameters for 10-Gbps Ethernet Operation

10-Gigabit Ethernet Implementations

Future of EthernetThe Expanding Scope of Ethernet