ccna discovery- designing and supporting computer networks - version 4.0 dcompntwk chapter 2 93%
Post on 10-Apr-2018
214 Views
Preview:
TRANSCRIPT
-
8/8/2019 CCNA Discovery- Designing and Supporting Computer Networks - Version 4.0 DCompNtwk Chapter 2 93%
1/5
1What is the purpose of SNMP?
to facilitate the exchange of information between devices and the NMSto monitor and control IP address allocation in a network
to report user login to a monitoring station
to verify traffic throughout the network and keep a log of all activity
2
What is the purpose of system-level acceptance testing?to develop an installation plan for the newly designed network
to train end users and support personnel on the newly installed network
to check that the newly installed network meets the business goals anddesign requirements
to justify the financial investment required to implement the technology change
3When should a network baseline be performed within the stages of the Cisco
Lifecycle Services?Prepare Phase
Plan Phase
Design Phase
Implement Phase
Operate Phase
4
What is a business constraint that may impact the WAN design of a company?company policy regarding specific operating systems on LAN devices
current monitoring protocols implemented on end-user devices
non-availability of end users during implementation
company policy requiring the use of specific vendor networking equipmentdue to partnerships
5
A corporation (client) wants a network upgrade and is putting out a requestfor services to various network consulting companies (contractors). Whichstatement is true concerning the required RFQ?
sent from the contractors to the client in response to a RFP
sent from the client to the contractors along with the RFP to provide more specific technical
details
sent from the client to the contractors in place of a RFP when the technicalspecifications of a project are known
sent from the contractors to the client outlining reasons for financial investments for the
network upgrade
6Which two statements best describe the responsibilities of an accountmanager? (Choose two.)
acts as the primary point of contact between the company and the clientdirects the sales teams and support personnel
provides technical support to critical clients
selects the equipment and technologies to be used for the client solutionacts as the network design lead
-
8/8/2019 CCNA Discovery- Designing and Supporting Computer Networks - Version 4.0 DCompNtwk Chapter 2 93%
2/5
7.Why is it important to prioritize business goals when developing networkdesign?
to ensure that the least expensive technologies are implemented first
to simplify the configuration, administration, and monitoring of the newly installed network
to anticipate the effects of changes and growth of the business
to adhere to the best opportunities to contribute to the success of thebusiness
8Which two statements are true regarding the response to an RFQ? (Choosetwo.)
The response should be brief.
It should strictly conform to the formatting requirements specified by theRFQ.
Only the items that the contracting company will be addressing should be answered.
The response helps the customer compare pricing with other potential
contractors.The response is more complicated than a response to an RFP.
9A network engineer working for a contracting company is informed of a pre-bid meeting with a potential client. What purpose does the network engineerhave for attending the pre-bid meeting?
to submit request for proposal responses
to discuss proposed installation and monitoring plans
to perform system-level acceptance tests on the current network
to clarify project scope and timelines not included in the original request for
proposalto create a business case outlining reasons for financial investment in a network upgrade
10What is a purpose of establishing a network baseline?
It provides a statistical average for network performance.
It manages the performance of network devices.
It creates a point of reference for future network evaluations.It checks the security configuration of network devices.
11
Which two items help identify business goals and priorities before a newnetwork project starts? (Choose two.)
installation
motivation
profitabilitytrustworthiness
customer satisfaction
12
A network engineer is analyzing the network of a potential client company toidentify problems and determine whether a network upgrade or addition is
needed. Which role in the sales team is this engineer assuming?post-sales field engineerpre-sales engineer
-
8/8/2019 CCNA Discovery- Designing and Supporting Computer Networks - Version 4.0 DCompNtwk Chapter 2 93%
3/5
account manager
network designer
13What are two benefits of using a top-down approach instead of a bottom-upapproach to network design? (Choose two.)
incorporates organizational requirementsallows for a quick response to a design request
requires less time up front to create a network design
clarifies design goals from the perspective of applications and networksolutions
facilitates a design by using devices and technologies that are based on previous experience
14
In a network management architecture, which statement best describes amanagement agent?
standardized database storing network performance parameters
communication protocol used between a management station and managed devicehost with the management application loaded that is used by the administrator to monitor
and configure network devices
software running on a managed device to collect network information andallow that device to be managed by a management station
15
Which stage of the Cisco Lifecycle Services strategy is usually completedbefore an organization issues a Request For Proposal (RFP) or Request ForQuotation (RFQ)?
Prepare PhasePlan PhaseDesign Phase
Implement Phase
Operate Phase
Optimize Phase
16A major corporation has decided to hire someone to upgrade their networkinfrastructure. A network consulting company wants the job. What documentmust the network consulting company obtain to learn about the businessgoals, the project scope, the requirements for the new network and theexpected deliverables?
Business Case
Project Plan
Request for ProposalRequest for Comments
17During an evaluation of the currently installed network, the IT staff performsa gap analysis to determine whether the existing network infrastructure cansupport the desired new features. At which stage of the Cisco LifecycleServices approach does this activity occur?
Prepare PhasePlan PhaseDesign Phase
-
8/8/2019 CCNA Discovery- Designing and Supporting Computer Networks - Version 4.0 DCompNtwk Chapter 2 93%
4/5
Implement Phase
Operate Phase
Optimize Phase
18
What is the purpose of creating a prioritized list of technical requirements?
defines the project scopedetermines the business profitability
creates a feasibility report for analysis
identifies existing and new user groups
19What is the purpose of preparing a business case?
to justify the financial investment in implementing the technology changeto provide an example of a previous job done in the RFP
to define the technical requirements of the network
to define timelines and critical milestones
20
Which stage of the Cisco Lifecycle Services involves proactive management toidentify and resolve issues before the organization is affected?
Prepare Phase
Plan Phase
Design Phase
Implement Phase
Operate Phase
Optimize Phase21
Which software component is installed on network devices that are managedthrough SNMP?
management agentsmanagement stations
network management protocol
Management Information Base (MIB)
22A network engineer working for ABC company is writing a response to an RFPfor a network upgrade and must create an executive summary. Whichstatement describes the basic components of an executive summary?
quick overview of the problem, the recommended solution, and the justification for ABC company doing the job
detailed description of the solution, including but not limited to, timelines, turn-over
schedule, warranty information, and emergency recovery information
detailed description of costs including, the cost of software and hardware components,
licensing requirements, labor cost, and other applicable fees
multiple page document containing additional information such as detailed lists of
equipment required, diagrams, company background information, and insurance coverage
23
(1) Not At All Enthusiastic (2) Slightly Enthusiastic (3) Enthusiastic (4) Very
-
8/8/2019 CCNA Discovery- Designing and Supporting Computer Networks - Version 4.0 DCompNtwk Chapter 2 93%
5/5
Enthusiastic (5) Completely Enthusiastic
In your opinion (this has no bearing on your grade), please indicate how enthusiastic you are about
the content of this course and the things youre learning (or have learned):
24
(1) Not At All Interested (2) Slightly Interested(3) Interested (4) Very Interested (5)Completely Interested
In your opinion (this has no bearing on your grade), please indicate your interest in this course:
25
(1) Not At All Motivated (2) Slightly Motivated (3) Motivated (4) Very Motivated
(5) Completely Motivated
In your opinion (this has no bearing on your grade), please rate your motivation to do well in this
course:
top related