certificate€¦ · certificate no. p11214503/a3 order no. 257031 page 2/25 date of issue...
Post on 17-Jul-2020
0 Views
Preview:
TRANSCRIPT
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 1/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Applicant Everlight Electronics Co., Ltd.No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City23860Taiwan
Manufacturer Everlight Electronics Co., Ltd.No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City23860Taiwan
Factory Everlight Electronic (China) Co., Ltd.No. 2135 Zhong Shan North Rd. Wujiang EconomyDevelopment Zone (Yun Xi Area), Songling Town,Wujiang City, Jiang SuChina
See next page(s)
Ratings 250Vrms
Trade mark EVERLIGHT
Model / Type Ref. ELW139.
Principal characteristics Single Channel Split Darlington. Minimum external creepage distance ismeasured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100 degreesC. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation may beA to Z, numbers or blank, denote different pin shape.
See next page(s)
A sample of the product was testedand found to be in conformity with
TRON EN 60065:2002;A1;A11;A2;A12IEC 60065(ed.7);am1;am2
OFF EN 60950-1:2006;A11;A1;A12;A2IEC 60950-1(ed.2);am1;am2
LITE EN 61347-1:2008;A1IEC 61347-1(ed.2);am1
HOUS EN 60335-1:2012IEC 60335-1(ed.5)
Replaces This certificate replaces previous certificate No. P11214503/A2, due to updating of standard.
Validity This certificate documents conformity with the standards shown, and also applies as license foruse of Nemkos name and certification mark. The certificate and license is valid as long as theapplicable conditions are complied with, and provided that any changes to the product are notifiedto Nemko for acceptance prior to implementation.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 2/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
New standards or amendments to the standards may imply that the product design must beupdated and/or that re-testing and re-certification is necessary.
Additional information See next page(s)
Additional model(s) See next page(s)
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 3/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 1Model / Type Ref. ELM611Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 2Model / Type Ref. ELT301X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Random Phase Phototriac. Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 4/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 3Model / Type Ref. ELT302X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Random Phase Phototriac. Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
Product Optocouplers
Pos. No 4Model / Type Ref. ELT305X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Random Phase Phototriac. Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 5/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 5Model / Type Ref. ELT303X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Zero-crossing Phototriac. Minimum external creepage distance is measured
to 7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
Product Optocouplers
Pos. No 6Model / Type Ref. ELT304X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Zero-crossing Phototriac. Minimum external creepage distance is measured
to 7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 6/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 7Model / Type Ref. ELT306X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Zero-crossing Phototriac. Minimum external creepage distance is measured
to 7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
Product Optocouplers
Pos. No 8Model / Type Ref. ELT308X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Zero-crossing Phototriac. Minimum external creepage distance is measured
to 7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 110ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degreeC, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humiditytest for 48h in 93% relative humidity. Electric strength test between inputand output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z ornumbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 7/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 9Model / Type Ref. ELW137.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate
Minimum external creepage distance is measured to 11.85mm, minimuminternal creepage distance is measured to 7.72mm and minimum distancethrough insulation is measured to 0.9mm. Tested for reinforced insulation.Maximum operating temperature: 100 degrees C. Thermal cycling test, 10cycles. Each cycle: 68h in 100 degree C, 1h in 25 degree C, 2h in 0 degreeC and 1h in 25 degree C. After the cycling test a humidity test for 48h in 93%relative humidity. Electric strength test between input and output 4800Vac/1minute. The symbol "." in type designation may be blank, A~Z or numbers,and denote different pin shape.
Product Optocouplers
Pos. No 10Model / Type Ref. ELW2601.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 11.85mm, minimum internal creepage distance ismeasured to 7.72mm and minimum distance through insulation is measuredto 0.9mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute. The symbol "."in type designation may be blank, A~Z or numbers, and denote different pinshape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 8/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 11Model / Type Ref. ELD3H5Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
Product Optocouplers
Pos. No 12Model / Type Ref. ELW2611.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 11.85mm, minimum internal creepage distance ismeasured to 7.72mm and minimum distance through insulation is measuredto 0.9mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity. Electric strength test between input and output4800Vac/1 minute. test for 48h in 93% relative humidity. The symbol "." intype designation may be blank, A~Z or numbers, and denote different pinshape.
Product Optocouplers
Pos. No 13Model / Type Ref. ELW136.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 11.85mm, minimum internal creepage distance is measuredto 7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 9/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 14Model / Type Ref. ELW135.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 11.85mm, minimum internal creepage distance is measuredto 7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 15Model / Type Ref. ELW4502.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 11.85mm, minimum internal creepage distance is measuredto 7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 16Model / Type Ref. ELW4503.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 11.85mm, minimum internal creepage distance is measuredto 7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 10/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 17Model / Type Ref. ELW138.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel Split Darlington Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 18Model / Type Ref. EL3120.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation maybe blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 19Model / Type Ref. EL3140.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation maybe blank, A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 11/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 20Model / Type Ref. EL3150.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation maybe blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 21Model / Type Ref. EL3180.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation maybe blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 22Model / Type Ref. ELD3H6Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 12/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 23Model / Type Ref. EL3184.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol "." in type designation maybe blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 24Model / Type Ref. ELW3120.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 110degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 25Model / Type Ref. ELW3140.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 110degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 13/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 26Model / Type Ref. ELW3150.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 110degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 27Model / Type Ref. ELW3180.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 110degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 28Model / Type Ref. ELW3184.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT Gate Drive Optocoupler Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 110degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 14/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 29Model / Type Ref. EL406A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 30Model / Type Ref. EL410A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 31Model / Type Ref. EL420A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 15/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 32Model / Type Ref. EL425A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 33Model / Type Ref. ELD3H7Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
Product Optocouplers
Pos. No 34Model / Type Ref. EL435A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 16/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 35Model / Type Ref. EL440A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 36Model / Type Ref. EL460A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 37Model / Type Ref. EL606A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 17/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 38Model / Type Ref. EL610A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 39Model / Type Ref. EL620A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 40Model / Type Ref. EL625A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 18/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 41Model / Type Ref. EL635A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 42Model / Type Ref. EL640A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 43Model / Type Ref. EL660A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Solid State Relay Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm andminimum distance through insulation is measured to 0.5mm. Tested forreinforced insulation. Maximum operating temperature: 85ºC. Thermalcycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity testfor 48h in 93% relative humidity. Electric strength test between input andoutput 4800Vac/1 minute. The symbol "." in type designation may be blank,A~Z or numbers, and denote different pin shape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 19/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 44Model / Type Ref. ELD3H4Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler(AC Type). Minimum external creepage distance is measured
to 5.0mm, minimum internal creepage distance is measured to 4.0mm andminimum distance through insulation is measured to 0.4mm. Tested forreinforced insulation. Maximum operating temperature: 110 degrees C.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 45Model / Type Ref. ELM452LTrade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 5.0mm, minimum internal creepage distance is measuredto 4.0mm and minimum distance through insulation is measured to 0.4mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 46Model / Type Ref. ELM453LTrade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 5.0mm, minimum internal creepage distance is measuredto 4.0mm and minimum distance through insulation is measured to 0.4mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 20/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 47Model / Type Ref. ELM600LTrade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 48Model / Type Ref. ELM601LTrade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 49Model / Type Ref. ELW260L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 11.85mm, minimum internal creepage distance ismeasured to 7.72mm and minimum distance through insulation is measuredto 0.9mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute. The symbol "."in type designation may be blank, A~Z or numbers, and denote different pinshape.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 21/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 50Model / Type Ref. ELW250L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 11.85mm, minimum internal creepage distance is measuredto 7.72mm and minimum distance through insulation is measured to 0.9mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute. The symbol "." in typedesignation may be blank, A~Z or numbers, and denote different pin shape.
Product Optocouplers
Pos. No 51Model / Type Ref. ELT307X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Random Phase Phototriac. Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to6.0mm and minimum distance through insulation is measured to 0.5mm.Tested for reinforced insulation. Maximum operating temperature: 110ºC.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. The symbol “X” in type denotes X = Partno.(0,1,2,3,4). The symbol "." in type designation may be A to Z, numbers orblank, denote different pin shape.
Product Optocouplers
Pos. No 52Model / Type Ref. ELM611LTrade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 22/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 53Model / Type Ref. ELQ3H4Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler(AC Type). Minimum external creepage distance is measured
to 5.0mm, minimum internal creepage distance is measured to 4.0mm andminimum distance through insulation is measured to 0.4mm. Tested forreinforced insulation. Maximum operating temperature: 110 degrees C.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 54Model / Type Ref. ELQ3H5Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
Product Optocouplers
Pos. No 55Model / Type Ref. ELM452Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 5.0mm, minimum internal creepage distance is measuredto 4.0mm and minimum distance through insulation is measured to 0.4mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 23/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 56Model / Type Ref. ELQ3H7Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
Product Optocouplers
Pos. No 57Model / Type Ref. ELM314Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics IGBT. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimumdistance through insulation is measured to 0.4mm. Tested for reinforcedinsulation. Maximum operating temperature: 110 degrees C. Thermal cyclingtest, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.
Product Optocouplers
Pos. No 58Model / Type Ref. ELD851.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTOTRANSISTOR. Minimum external creepage
distance is measured to 7.7mm, minimum internal creepage distance ismeasured to 5.5mm and minimum distance through insulation is measuredto 0.5mm.Tested for reinforced insulation. Thermal cycling test, 10 cycles.Each cycle: 68h in 100 degree C, 1h in 25degree C, 2h in 0 degree C and1h in 25 degree C. After the cycling test a humidity test for 48h in 93%relative humidity. The symbol “.” in type designation may be blank, A~Z ornumbers, and denote different pin shape. Maximum operating temperature:100 degrees C. Electric strength test between input and output 4800Vac/1minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 24/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 59Model / Type Ref. ELD852.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTODARLINGTON Minimum external creepage
distance is measured to 7.7mm, minimum internal creepage distance ismeasured to 5.5mm and minimum distance through insulation is measuredto 0.5mm.Tested for reinforced insulation. Thermal cycling test, 10 cycles.Each cycle: 68h in 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1hin 25 degree C. After the cycling test a humidity test for 48h in 93% relativehumidity. Electric strength test between input and output 4800Vac/1 minute.The symbol “.” in type designation may be blank, A~Z or numbers, anddenote different pin shape. Maximum operating temperature: 100 degrees C.
Product Optocouplers
Pos. No 60Model / Type Ref. ELM453Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Transistor Minimum external creepage distance
is measured to 5.0mm, minimum internal creepage distance is measuredto 4.0mm and minimum distance through insulation is measured to 0.4mm.Tested for reinforced insulation. Maximum operating temperature: 100degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degreeC, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After thecycling test a humidity test for 48h in 93% relative humidity. Electric strengthtest between input and output 4800Vac/1 minute.
Product Optocouplers
Pos. No 61Model / Type Ref. ELM600Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
CERTIFICATENo. P11214503/A3
Order No. 257031 Page 25/25
Date of issue 04-04-2014
Skule MoeCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com
Product Optocouplers
Pos. No 62Model / Type Ref. ELM601Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Single Channel High Speed Logic Gate Minimum external creepage
distance is measured to 5.0mm, minimum internal creepage distance ismeasured to 4.0mm and minimum distance through insulation is measuredto 0.4mm. Tested for reinforced insulation. Maximum operating temperature:100 degrees C. Thermal cycling test, 10 cycles. Each cycle: 68h in 100degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. Afterthe cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 4800Vac/1 minute.
top related