cfa - · pdf filerhopoint instruments limited rhopoint house enviro 21park queensway avenue...
Post on 07-Feb-2018
215 Views
Preview:
TRANSCRIPT
CFA Carton Force Analyser Measure all the forces required to erect cartons
Increase the running speed of carton packaging
Eliminate rejections and reduce waste
INCREASE THE RUNNING SPEED OF CARTON PACKAGING
Carton Force AnalyserCFAThe Hanatek CFA measures the forces that limit therunning speed of folding box board packaging.
By measuring the stiffness of the substrate andcrease bending resistance the user can optimisecartons for faster running and packaging speeds.
The instrument allows individual creases to beanalysed identifying problem areas in packagingdesign or manufacture.
Industry research indicates that the packagingspeeds of pre-glued skillets is governed by theenergy required to open creases. The Hanatek CFAis the first instrument to isolate and accuratelymeasure this key parameter.
INCREASE THE RUNNING SPEED OF CARTON PACKAGING
Board Stiffness
Measures the stiffness of the card sample to ISO 2493. Thestiffness of the sample is measured twice, once with theprinted side of the carton facing forward and the second timewith the printed side facing to the rear. The resultant force isdisplayed in grams per cm (g/cm), Gurley units, milliNewtonmeters (mN m) or Newton meters (N m). The average of thetwo measurements is calculated as well as the Min, Max andstandard deviation on a multiple sample test.
F E AT U R E S
F L E X I B L E T E S T I N G
T E S T T Y P E S
This flexible instrument can be configured for quality orresearch use –
Research Tool
Create and save bespoke test methods
Variable sample length, rotation speed and crease angle
Statistical and graphical analysis of results
Q.A.
Pre-loaded ISO/BS/TAPPI test methods
Date/operator stamped results
Pre-set pass/fail criteria
Optional password protection
All operations and test methods have comprehensivegraphical on-screen help.
Intuitive and easy to use
Easy training for new users
Consistent results for all operators
No need to consult complicated manuals The instrument has pre-loaded test instructions that ensure samplesare tested to international standards.
Real time graphs detail the process of folding, showingincreased crease resistance until board fibres break and thecrease relaxes. The CFA allows these fingerprints to be savedand overlaid, a powerful tool that allows detailed comparisonof different crease formats, substrates and manufacturedbatches.
Rotation Speed
Automatic, user selectable speed of rotation. This removeserrors associated with manual rotation.
Choice of sample sizes
The CFA enables the smallest of creases to be analysed.
The smallest crease that can be tested on the Hanatek CFA
Sample size for traditional crease testing apparatus
Test results can be saved and compared.
Crease resistance, crease opening and substrate stiffness.Round-corner crease resistance jaw is also available.
Crease Resistance
Choice of 2 tests.
The first measures the crease recovery to BS 6965. During thetest, the crease is folded through the pre-selected crease angle;the resultant force is measured after 15 seconds. The secondmeasures the force exerted on the crease as the instrumentrotates the sample throughout the desired test angle. The peakforce is displayed as well as the angle at which this force wasreached. The resultant force is displayed in Newtons (N), gramsforce (gf) or milliNewton meters (mN m). The averagemeasurement is calculated as well as the Min, Max andstandard deviation on a multiple sample test.
Carton Opening Force
This test will record the forces involved in erecting a skillet intoan open carton, simulating the process during machineopening. The resultant force is displayed in real time on thescreen, in graphical format as the sample is rotated through thepre-selected test angle (usually 90º), and reported in Newtons(N) as well as the Energy (mj) required to open the sample.
Ratio Test
One of the key parameters to assesswhether a carton will run on a machine isthe crease to board stiffness ratio. Asdescribed in BS 6965, the ratio of thecrease to board stiffness should be <2.The ratio test jaw allows both the creaseand stiffness tests to be conducted onone jaw and the resulting ratio is calculated and displayed.
Crease Opening Force
The force required to erect pre-glued skillets can determine thepackaging speeds of automatic filling lines. Slow runningskillets are often rejected, leading to increased waste.
The Hanatek CFA measures the force and energy required toerect each individual folded crease. This information can beused to optimise carton design and predict the running speedof samples before committing machine time.
VERSATILE INSTRUMENT – REPEATABLE MEASUREMENTS – EASY TO USE
S P E C I F I C AT I O N S
D ATA T R A N S F E R
Tests performed on the Carton Force Analyser can be easilyoutput to PDF for simple reporting and data storage. PDF filesshow the full graphic information, test statistics as well asindividual test results.
In addition, full details of the forces detected by the load cellcan be output to a .csv file.
The instrument can be added to a company network tofacilitate simple data sharing and regular data back-up(requires operating system upgrade).
Relative Crease Strength
Measures the bending force of a creased structure and anuncreased structure and calculates the relative crease strengthratio. Results are in %. The average is calculated as well as theMin, Max and standard deviation on a multiple sample test.
RCS (%) * 100
Geometrical Stiffness
Measures the bending stiffness of the structure in bothMachine Direction (MD) and Cross Direction (CD) andcalculates the geometrical stiffness. Results are in mN. Theaverage is calculated as well as the Min, Max and standarddeviation on a multiple sample test.
Geometrical stiffness (mN)
Crease/Board Analysis
Displays the curve of the force vs the angle needed to bend asample to a certain angle, at a certain speed, with a certainrelaxation time. Also calculates the maximal force (Fmax) inmN, the maximal angle (ɸmax) in degrees, the moment atrelaxation (M relax) in mNm, the total work at stop (W stop) inmJ, the angle after relaxation (ɸ0) in degrees, and the stiffnessin mN. The average is calculated as well as the Min, Max andstandard deviation on a multiple sample test.
Printed carton board
Unprinted carton board
A P P L I C AT I O N S
INSTRUMENT SPECIFICATIONS
Resolution Repeatability
Rotation angle (º) 0.01 <0.1
Rotation speed (º/s) 0.001 <0.01
Sample length (mm) 0.01 <0.05
Load cell (mN) 1 <10
Power 120V/230V; 50Hz/60Hz
Load cell capacity 20N
INSTRUMENT DIMENSIONS
Size 220mm x 225mm x 300mm
Net weight 5.5kg (instrument), 5.35kg (PC)
Packed weight 19kg (including screen, sample
cutter and jaws)
Packed dimensions 480mm x 540mm x 450mm
Commodity code 9024 8091
TOUCH SCREEN PC SPECIFICATIONS
Connectivity Wireless 802.11n, Wireless 802.11b,
Wireless 802.11g/ LAN Network
Operating System Windows 7 Home Premium
Easily integrated into laboratory network for results/backup
and printing
Results can also be exported to USB data key.
Rhopoint Instruments Limited Rhopoint House Enviro 21ParkQueensway Avenue South St Leonards-on-SeaEast Sussex TN38 9AG UK Tel: +44 (0) 1424 739623sales@hanatekinstruments.com www.hanatekinstruments.com
Carton Force Analyser
A P P L I C AT I O N S & S TA N D A R D S
E X T R A S
RI00302/12/13
ISO 2493: Paper and board – Determination of resistance tobending (Lorentzen & Wettre/Taber)
ISO 5628: Paper and board – Determination of bendingstiffness by static methods
Tappi T 556: Bending resistance of paper and paperboard(Lorentzen & Wettre/Taber Tester)
T 543: Bending resistance of paper (Gurley-type tester) –Calculated results equivalent to this method.
T 489: Bending resistance (stiffness) of paper andpaperboard (Taber-type stiffness tester in basicconfiguration)
SCAN-P-29-95: Bending resistance
DIN 53121: Testing of paper and board – Determination ofthe bending stiffness by the beam method
BS 6965-1: Creasing properties of carton board. Method for determination of crease recovery (spring back)of 90° fold.
FREE EXTENDED WARRANTYRegister for a two year comprehensive guarantee
CALIBRATION AND SERVICEFast and economic service via our global network ofaccredited calibration and service centres
I N C L U D E D A C C E S S O R I E S
O P T I O N A L A C C E S S O R I E S
y 16” touch screen PC
y Carton Force Analyser software and connection cables
y A choice of 3 testing jaws (see below)
y UKAS traceable calibration certificate
y Calibration check standard
Test jaw options:
y Carton crease
y Rounded corner creases
y Carton stiffness
y Whole carton opening force
y Whole crease opening force
y Ratio test
y Dedicated crease & board sample cutter
y Hanatek universal sample cutter
Certificate no: FM 29741ISO 9001:2008
CFA
top related