choke and electronic - in-motion limited | arri ballast brochure... · 2015. 10. 8. · arri was a...
Post on 25-Jan-2021
0 Views
Preview:
TRANSCRIPT
-
1
BALLASTSChoke and Electronic
-
2
ARRI Ballast Technologies
ARRI Ballasts
From the introduction of metal halide discharge lighting in the 1970’s, ballasts have been an integral part of the ARRI Lighting family. Since then, the range has developed into the reliable, robust and efficient components recognised world- wide as the industry standard for film, theatre and events.
ARRI was a pioneer in the introduction of electronic ballasts which have now become industry standard. ARRI offers a comprehensive range of choke and electronic ballasts for mains and battery operation, including 19” multi-function ballasts - plug in technology for the universal connection of different power lampheads. Latest developments include high-speed ballasts for digital video and new features including CCL cable loss compensation which maintaining full output even with long head cables.
Today, ARRI Ballasts feature state of the art electronics and offer easy maintenance, automatic fault detection and extensive status indicators along with impeccable reliability and safety. A wide range of cables and accessories completes the ARRI range.
Electronic Ballast Features
• Flicker-free operation without camera synchronisation
• ALF (Active Line Filter) for most Electronic Ballasts
• Automatic Voltage Selection on dual voltage models
• Low Noise operating mode for sync sound filming
• Over-Voltage mains protection
• Soft Starting to improve lamp life
• Protection against ignition spikes
• Dimming on all models
• Operate in temperatures up to 50°C
Ballast Options
• Choke ballasts with 1200 W to 4000 W capacity
• Electronic ballasts from 125 W to 18,000 W
• Electronic battery ballasts 125 W to 1200 W
• 19” rack mount electronic ballasts - plug-in technology for 200 W to 4000 W
• Rolling racks with integrated power distribution for 19” electronic ballasts
• Multicore cables and intelligent splitter boxes for Location and EVENT Systems
• Options for International Veam or Schaltbau connectors and for non-ARRI lampheads
• Optional DMX or analogue remote control on many models
• Rack-mounted or stand alone Boost Ballasts
• High Speed options 1000 Hz to 4 kW and 300 Hz 6 – 18 kW for high speed video photography
• Light-weight models up to 575 W for maximum portability
For further information: www.arri.com
-
ARRI | BALLASTS
3
ARRI EVENT Systems
ARRI EVENT Systems have set the standard for exhibitions, car shows and other events where daylight sources are required. The EVENT System saves set-up time and costs with improved cable management. Special EVENT Arrisun and ARRI X heads are supplied by a 19” 4U pack via a single multicore cable. For more details please refer to the EVENT Brochure.
Location Multifunction Ballasts
Location Multi-function Ballasts save space on set and make plugging up discharge heads almost as easy as tungsten. A rolling rack can power up to 18 lampheads via multi-core cables. Standard ARRI heads from 200 W to 4 kW can be used.
Intelligent splitter boxes are available in two types: the 2/6/12 can supply 6 x 200 or 575 W heads or up to 3 x 1.2 kW heads driven by pairs of channels while the 2.5/4 splitter operates up to three 2.5 or 4 kW heads.
The boxes identify the combination connected so the appropriate power is supplied without risk.
Boost Ballasts
High speed filming can demand very high light levels for a short time. HMI is ideal for this, producing 3-4 times as much visible light as tungsten but with less heat. Boost Ballasts over-drive standard 4 kW lampheads to 8 kW giving the high-est possible light output for high-speed photography with smaller and lower cost lampheads.
Both 19” rack mounted and stand-alone versions are available with a range of remote control options.
Choke Ballasts
Where flicker-free lighting is not required, ARRI choke ballasts offer a robust, low-cost solution. Choke ballasts are optionally available with DMX remote control, ideal for theatre and event applications.
High Speed Ballasts
The advent of a new generation of high-speed video cameras has created new lighting challenges. High speed video, previously the preserve of specialist industrial film-makers has now become mainstream. ARRI is pleased to introduce a new generation of 1000 Hz High Speed Ballasts that meet the challenge of modern digital high-speed photography with ease.
From experience gained making High Speed 300 Hz ballasts for the industrial market and developed in co-operation with Weisscam, this new technology offers worry-free shooting with standards of exposure and colour stability suitable for commercials and sport. 1000 Hz ballasts are available for lampheads up to 4 kW and 300 Hz ballasts up to 18 kW.
Battery Ballasts
For ultimate portability, lampheads up to 400 W can be battery powered from 24-36 V battery supplies via Electronic Battery Ballasts. Ballasts can be powered from standard battery technologies including Lead Acid, NiCd, NiMH and Lithium. Battery Ballasts have lightweight extruded aluminium housings for maximum portability allowing for applications such as belt-pack use.
Lightweight Ballasts
ARRI equipment is known for the high robustness demanded for film location work, but for run-and-gun applications lightweight ballasts up to 575 W are available with lightweight extruded aluminium housings, an ideal match for the ARRI Pocket PAR lampheads.
Accessories
To complement the range of ARRI ballasts, available accessories include head-to-ballast cable testers and a newly redesigned Flicker Meter to check the stability of any light source including HMI, fluorescent, LED and display monitors. The new model also includes frequency and light intensity measurement.
-
4
125/200 W Electronic Ballast
EB: L2.76013.BEB 1000 Hz: L2.76013KH115/230 V
Technical Data:Size (mm): 70H x 180W x 240L Weight (kg): 2.3
Accessories:7 m 125 W Head to Ballast Cable L2.73382.0
7 m 200 W Head to Ballast Cable L2.73372.0
Mounting Plate with Superclamp L2.76100.0
400/575 W Electronic Ballast
EB: L2.76260.0EB DMX: L2.76261.0EB 1000 Hz: L2.76260KH115/230 V
Technical Data:Size (mm):91H x 155W x 270LWeight (kg): 3
Accessories:7 m 575 W Head to Ballast Cable L2.75600.0L
15 m 575 W Head to Ballast Cable L2.75600.C
7 m 400 W Head to Ballast Cable L2.70857.0
Mounting Plate with Superclamp L2.76100.0
Lightweight Elect. Ballasts
575/1.2 kW Electronic Ballast
Standard DMXEB: L2.76125.0 L2.76126.0EB ALF: L2.76425.0 L2.76426.0EB 1000 Hz: L2.76425KH115/230 V
Technical Data:Size (mm):150H x 200W x 300LWeight (kg): 7.5
Accessories:7 m 575/1200 W Head to Ballast Cable L2.75600.0
15 m 575/1200 W Head to Ballast Cable L2.75600.C
1200/1800 W Electronic Ballast
EB: L2.76625.0EB DMX: L2.76626.0EB 1000 Hz: L2.76625KH115/230 V
Technical Data:Size (mm):156H x 200W x 335LWeight (kg): 8
Accessories:7 m 575/1200 W Head to Ballast Cable L2.75600.0
15 m 575/1200 W Head to Ballast Cable L2.75600.C
125/200 W Electronic Battery Ballast
EBB: L2.76040.B
Technical Data:Size (mm):67H x 130W x 158LWeight (kg): 1.2
Accessories:7 m 125 W Head to Ballast Cable L2.73383.0
7 m 200 W Head to Ballast Cable L2.73372.0
Mounting Plate with Superclamp L2.76100.0
Mounting Plate with Velcro Strap L2.76095.0
200/400 W Electronic Battery Ballast
EBB: L2.76270.B
Technical Data:Size (mm):91H x 155W x 265LWeight (kg): 2.6
Accessories:7 m 200 W Head to Ballast Cable L2.73372.0
7 m 400 W Head to Ballast Cable L2.79857.0
Mounting Plate with Superclamp L2.76100.0
575/1.2 kW AC/DC Electronic Ballast
EBB: L2.76230.0
Technical Data:Size (mm):200H x 230W x 358LWeight (kg): 11
Accessories:7 m Head to Ballast Cable L2.75600.0
15 m Head to Ballast Cable L2.75600.C
2.5 kW Electronic Ballast
EB: L2.76635.0EB DMX: L2.76636.0115/230 V
Technical Data:Size (mm):358H x 243W x 450LWeight (kg): 21
Accessories:7 m 2.5/4 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
2.5 kW ‘Baby’ Electronic Ballast
EB: L2.76695.0EB DMX: L2.76696.0230 V
Technical Data:Size (mm):156H x 200W x 335LWeight (kg): 8
Accessories:7 m 2.5/4 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
200 W Electronic Ballast
EB ALF: L4.76115.0115/230 V
Technical Data:Size (mm): 134H x 146W x 251LWeight (kg): 3.4Silent, no fan.
Accessories:7 m 200 W Head to Ballast Cable L2.73372.0
Location Electronic Ballasts
Electronic Battery Ballasts
Boost Option
High Speed Option
-
ARRI | BALLASTS
5
575/1.2/2.5/4 kW Electronic Ballast
EB 575-4 kW230V: L2.76671.0
Technical Data:Size (mm):358H x 243W x 450LWeight (kg): 20
Accessories:7 m 2.5/4 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
2.5/4 kW Electronic Ballast
Standard DMXEB 2.5/4 kW230V: L2.76640.0 L2.76641.0
EB 1000 Hz: L2.76640KH
CCL: L2.76650.0
EB 2.5/4 kW115/230 V: L2.76675.0 L2.76676.01000 Hz: L2.76675KH
Technical Data:Size (mm):358H x 243W x 450LWeight (kg): 20
Accessories:7 m 2.5/4 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
6/12 kW Electronic Ballast
EB: L2.76172.0EB DMX: L2.76182.0EB 300 Hz: L2.76172HS6kW 115/230 V12kW 230 V
Technical Data:Size (mm):498H x 263W x 506LWeight (kg): 40
Accessories:7 m 6 kW Head to Ballast Cable L2.77940.0
15 m 6 kW Head to Ballast Cable L2.77940.A
15 m 12/18 kW Head to Ballast Cable L2.82294.0
20 m 12/18 kW Head to Ballast Cable L2.82294.A
Trolley for Ballast L2.76178.0
12/18 kW Electronic Ballast
EB: L2.76290.0EB DMX: L2.76291.0EB 300 Hz: L2.76290HS 230V
Technical Data:Size (mm):584H x 283W x 560LWeight (kg): 49
Accessories:15 m 12/18 kW Head to Ballast Cable L2.82294.0
20 m 12/18 kW Head to Ballast Cable L2.82294.A
Boost Option
High Speed Option
6 kW and 2.5/4/6 kW Electronic Ballast
EB 6 kW: L2.76193.0EB 6 kW 300 Hz: L2.76193EHEB 2.5/4/6 kW: L2.76195.0 115/230 V
Technical Data:Size (mm):358H x 243W x 450LWeight (kg): 25
Accessories:7 m 6 kW Head to Ballast Cable L2.77940.0
15 m 6 kW Head to Ballast Cable L2.77940.A
7 m 2.5/4 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
Boost Ballasts4-8 kW Boost Ballast
EB: L2.76641.B230 V
Technical Data:Size (mm):358H x 243W x 450LWeight (kg): 21
Accessories:7 m 2.5 kW Head to Ballast Cable L2.75620.0
15 m 2.5/4 kW Head to Ballast Cable L2.75620.C
Hand Control for Boost Ballast L2.76810.0
4-8 kW 19” Boost Ballast
EB Interbus L2.76691.0EB Digital r/c L2.76692.0EB Analog r/c L2.76693.0
Technical Data:Size (mm):560L x 19”W x 4U HWeight (kg): 24
Accessories:Steel Rack for 8 x 19” EB L2.76344.0
Flight Case:for 1 x 19” EB L2.76352.0
for 3 x 19” EB L2.76788.0
for 4 x 19” EB L2.76789.0
Choke Ballasts1.2 kW Choke Ballast
CB: L2.75012.E
Technical Data:Size (mm):398H x 175W x 254LWeight (kg): 20
Accessories:7 m 1.2 kW Head to Ballast Cable L2.75600.0
15 m 1.2 kW Head to Ballast Cable L2.75600.C
2.5 kW Choke Ballast
CB DMX: L2.75024.E
Technical Data:Size (mm):398H x 175W x 293LWeight (kg): 28.5
Accessories:7 m 2.5 kW Head to Ballast Cable L2.75620.0
15 m 2.5 kW Head to Ballast Cable L2.75620.C
4 kW Choke Ballast
CB DMX: L2.75870.E
Technical Data:Size (mm):480H x 365W x 630LWeight (kg): 61
Accessories:7 m 4 kW Head to Ballast Cable L2.75620.0
15 m 4 kW Head to Ballast Cable L2.75620.C
-
6
EVENT Ballasts
EB 575 W EVENT Single
Part no.: L2.76259EV
Technical Data:Size (mm): 100 H x 198 W x 285 LWeight (kg): 3.18
Accessories:Mounting Plate With Superclamp L2.76100.0
Head to Ballast Cables:2.5 m L2.76318.A
5 m L2.76318.B
10 m L2.76318.C
15 m L2.76318.D
30 m L2.76318.E
EB 200 W EVENT Six
Part no.: L2.76321.0
Technical Data:Size (mm): 560L x 19”W x 4U HWeight (kg): 22
Accessories:6-channel EVENT Splitbox L2.76341.0
Multicore Cables:5 m L2.76342.B
10 m L2.76342.C
20 m L2.76342.D
50 m L2.76342.E
EB 200/575/1200 W EVENT Multifunction
Part no.: L2.76777.0
Technical Data:Size (mm): 560L x 19” W x 4U HWeight (kg): 22
Accessories:6-channel EVENT Splitbox L2.76341.B
Multicore Cables:5 m L2.76342.B
10 m L2.76342.C
20 m L2.76342.D
50 m L2.76342.E
EB 1200 W EVENT Three
Part no.: L2.76331.0
Technical Data:Size (mm): 560L x 19”W x 4U HWeight (kg): 22
Accessories:3-channel EVENT Splitbox L2.76367.0
Multicore Cables:5 m L2.76342.B
10 m L2.76342.C
20 m L2.76342.D
50 m L2.76342.E
EB 1200 /1800 W EVENT Three
Part no.: L2.76610.0
Technical Data:Size (mm): 560L x 19”W x 4U HWeight (kg): 22
Accessories:3-channel EVENT Splitbox L2.37705.0
EB 575 W EVENT Six
Part no.: L2.76340.0
Technical Data:Size (mm): 560L x 19”W x 4U HWeight (kg): 22
Accessories:6-channel EVENT Splitbox L2.76341.0
Multicore Cables:5 m L2.76342.B
10 m L2.76342.C
20 m L2.76342.D
50 m L2.76342.E
Accessories
Accessories
EB 200/575/1200 Location Multifunction
Part no.: L2.76778.0Flight Case for 3 x 19” EB Modules.Picture shows 3 Ballast Packs in Flight Case with Multicore Cable and Splitbox.
Technical Data:Size (mm):560L x 19”W x 4U HWeight (kg): 22
Accessories:6-channel Location Splitbox L2.76779.B
Multicore Cables:20 m L2.76781.C
30 m L2.76781.D
50 m L2.76781.E
EB 2.5/4 Location Multifunction
Part no.: L2.76792.0Flight Case for 3 x 19” EB Modules.Picture shows 3 Ballast Packs in Flight Case with Multicore Cable and Splitbox.
Technical Data:Size (mm):560L x 19”W x 4U HWeight (kg): 24
Accessories:3-channel Location Splitbox L2.76793.B
Multicore Cables:20 m L2.76796.C
30 m L2.76796.D
50 m L2.76796.E
Multifunction Ballasts
Light, Frequency and Flicker Meter
Part no.: L2.76305.0Easy, accurate measurement of light level, flicker, light frequency and supply frequency for most light sources and monitors.
Technical Data:Size (mm): 162L x 82W x 40H Weight (kg): 0.3 Display: Graphic with backlight Battery: 3 x AA Flicker Factor: 0-100% Frequency: 9-1000 Hz Illumination: 50-150,000 lux 4.6-13,900 fc
Cable Checker 575-4 kW & 6-18 kW
Part nos.:575-4000 W: BS130000026-18 kW: BS13000004115/230 VIndication of short circuit and broken wires in head to ballast cables.
Technical Data:Size (mm): 298H x 225W x 90LWeight (kg): 3.5Test current: 1 ATest voltage: 300 V
-
ARRI | BALLASTS
7
SpecificationBa
llast
Typ
e
ID N
umbe
r
Inpu
t Vol
tage
Inpu
t Cur
rent
(A) n
omin
al
Inpu
t Pow
er a
ppar
ent
(VA)
Pow
er F
acto
r (co
s Φ)
Effic
ienc
y %
Max
. Am
bien
t Tem
p. °
C
IP R
atin
g
On/o
ff
Earth
Lam
p lit
Over
Tem
pera
ture
Auto
mat
ic L
amp
Reco
gniti
on
Activ
e Li
ne F
ilter
Com
pens
atio
n fo
r Cab
le L
osse
s
Dim
min
g
Flic
ker F
ree
50 H
z Cry
stal
Low
Noi
se
60 H
z Cry
stal
Low
Noi
se
DMX
Rem
ote
Cont
rol
Scha
ltbau
Out
put
300
Hz O
utpu
t
1000
Hz O
utpu
t
Choke Ballasts Indicators Features Output Type Options
1.2 kW L2.75012.E 220-240 VAC 50/60 Hz 6 1373 0.95 89 40 32 • • *
2.5 kW L2.75024.E 220-240 VAC 50/60 Hz 13 2956 0.9 94 40 32 • • Std *
4 kW L2.75870.E 220-240 VAC 50/60 Hz 21 4779 0.9 93 40 32 • • Std *
Electronic Battery Ballast
125/200 W DC L2.76040.B 20-34 VDC 5.8/9.3 A @ 24 V 225 - 88 45 22 • • •
200/400 W DC L2.76270.B 20-36 VDC 10/20 A @ 24 V 490 - 82 50 22 • • •
575/1200 W AC/DC L2.76230.0 90-250 VDC 3.2/6.6 A @ 230 V 1530 0.98 80 50 • • • • • • • *
24-60 VDC (575 W) 15 A @ 48 V 720 -
48-60 VDC (1200 W) 31 A @ 48 V 1530 -
Electronic Mains Ballast
125/200 W L2.76013.B 90-130 / 180-250 VAC 0.6/1 A @ 230 V 240 0.98 88 50 22 • • • • • • • *
200 W L4.76115.0 90-130 / 180-250 VAC 1 A @ 230 V 240 0.98 88 50 22 • • • • • • • • •
400/575 W L2.76260.0 90-130 / 180-250 VAC 2.0/2.9 A @ 230 V 667 0.98 85 50 22 • • • • • • • * *
575/1200 W without ALF L2.76125.0 90-125 / 180-250 VAC 4.8/9.9 A @ 230 V 2290 0.6 91 50 22 • • • • • • • • * *
575/1200 W L2.76425.0 90-125 / 180-250 VAC 3/6 A @ 230 V 1390 0.98 88 50 22 • • • • • • • • • * * *
1200/1800 W L2.76625.0 90-125 / 180-250 VAC 9.8 A @ 230 V 2250 0.98 88 50 21 • • • • • • • • • • • * * *
2.5 kW ‘Baby’ L2.76695.0 180-250 VAC 12.2 A @ 230 V 2800 0.98 91 50 21 • • • • • • • • • * *
2.5 kW L2.76635.0 90-125 / 180-250 VAC 12.6 A @ 230 V 2900 0.98 88 50 22 • • • • • • • • • * *
2.5/4 kW L2.76640.0 190-250 VAC 12.6/20 A @ 230 V 4650 0.98 88 50 22 • • • • • • • • • • * * *
2.5/4 kW CCL L2.76650.0 190-250 VAC 12.6/20 A @ 230 V 4650 0.98 88 50 22 • • • • • • • • • • • * * *
2.5/4 kW Dual Voltage L2.76675.0 90-125 / 180-250 VAC 12.6/20 A @ 230 V 4650 0.98 88 50 22 • • • • • • • • • • * *
575/1.2/2.5/4 kW L2.76671.0 190-250 VAC 3-20 A @ 230 V 4650 0.98 88 50 22 • • • • • • • • • • * *
2.5/4/6 kW L2.76195.0 180-250 VAC 29.5 A @ 230 V 6800 0.98 90 50 22 • • • • • • • • •
4-8 kW Boost L2.76641.B 190-250 VAC 20/40 A @ 230 V 4650/9300 0.98 88 50 22 • • • • • • • • • * * *
6 kW L2.76193.0 180-250 VAC 29.5 A @ 230 V 6800 0.98 90 50 22 • • • • • • • • •
6/12 kW L2.76172.0 90-125 VAC (6 kW) 60 A @ 115 V 6900 0.98 89 50 22 • • • • • • • • • * *
180-250 VAC (6/12 kW) 29/57 A @ 230 V 13200 0.98 91
12/18 kW L2.76290.0 190-250 VAC 56/84 A @ 230 V 19400 0.98 95 50 22 • • • • • • • • • • * *
19” and EVENT Ballasts
200 W EVENT Six L2.76321.0 90-130 / 180-250 VAC 3x 2.2 A @ 230 V 1500 0.98 88 60 20 • • • • • • • Std
575 W EVENT Single L2.76259EV 90-130 / 180-250 VAC 2.0/2.9A @ 230 V 667 0.98 85 50 22 • • • • • • • Std
575 W Six L2.76340.0 90-130 / 180-250 VAC 6x 3 A @ 230 V 4200 0.98 88 60 20 • • • • • • • Std
1200 W Three L2.76631.0 90-130 / 180-250 VAC 3x 6 A @ 230 V 4200 0.98 88 60 20 • • • • • • • Std
1200/1800 EVENT Three L2.76610.0 90-130 / 180-250 VAC 3x 9.8 A @ 230 V 6750 0.98 88 60 20 • • • • • • • Std
2500/4000 W Multifunction L2.76791.0 90-130 / 180-250 VAC 20 A @ 230 V 4650 0.98 88 60 20 • • • • • • • Std
200/575/1200 W Multifunction L2.76777.0 90-130 / 180-250 VAC 3x 6 A @ 230 V 4200 0.98 88 60 20 • • • • • • • Std
4-8 kW Boost L2.76691.0 90-130 / 180-250 VAC 40 A @ 230 V 4650/9300 0.98 88 60 20 • • • • • • •
*Contact your supplier for details and part numbers. Other options are also available including output connections for non-ARRI lampheads.
-
ARRI Ballast Technologies
Germany
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.Pulvermuhle, D-83071 Stephanskirchen Tel: +49(0)8036-3009-0, Fax: +49(0)8036-2471
ARRI Lighting Solutions GmbHErnst-Augustin Str. 12, D-12489 BerlinTel: + 49(0)30-678233-0, Fax: +49(0)30-678233-99
Great Britain
ARRI CT Limited 2 Highbridge, Oxford Road, Uxbridge, Middlesex, UB8 1LX, Great BritainTel: +44 (0)1895 457 000, Fax: +44 (0)1895 457 001
Italy
ARRI Italia S.r.l. (Sales & Service, Milan)Viale Edison 318, 20099 Sesto San Giovanni (Milano), Italy Tel: +39 (02)262 271 75, Fax: +39 (02)242 1692
ARRI Italia S.r.l (Sales & Service, Rome)Via Placanica 97, 00040 Morena (Roma), ItalyTel: +39 (06)79 89 021, Fax: +39 (06)79 89 02 206
USA
ARRI Inc. (Sales & Service, East Coast)617 Route 303, Blauvelt, NY 10913-1109, USATel: +1 (845)353 1400, Fax: +1 (845)425 1250
ARRI Inc. (Sales & Service, West Coast)600 North Victory Blvd., Burbank, CA 91502-1639, USATel: +1 (818)841 7070, Fax: +1 (818)848 4028
Canada
ARRI Canada Limited (Sales & Service)415 Horner Ave, Unit 11 & 12, Toronto, Ontario M8W 4WS, CanadaTel: +1 (416)255 3335, Fax: +1 (416)255 3399
Australia
ARRI Australia PTY LimitedUnit 6C, 5 Talavera Road, Macquarie Park NSW 2113, Sydney, AustraliaTel: +61 (2)9855 4308, Fax: +61 (2)9855 4301
Hong Kong
ARRI ASIA LimitedOffice 3B on 29/F, The Centrium, 60 Wyndham Street, Central, Hong KongTel: + 852 2571 6288 Fax: + 852 2875 9181
This ARRI ballast brochure (ID-No. L5.90196.E) is published by Arnold & Richter Cine Technik, September 2nd, 2011 © ARRI/2011Technical data and offerings are subject to change without notice. All rights reserved. Without any warranty. Not binding 02/09/11. ARRI is a registered trademark of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG • Türkenstrasse 89 • D-80799 Munich • phone +49(0)89 3809 0 • fax +49 (0)89 3809 1245 • www.arri.com
top related