conference program€¦ · sinumerik-technology-application-tips-tricks - new functions for the sw...
Post on 14-Jul-2020
0 Views
Preview:
TRANSCRIPT
5th – 6
th February 2019
CONFERENCE PROGRAM
CONFERENCE PROGRAM: First day: February 5th
2019
8:00-8:55 REGISTRATION
9:00-9:30
Vladimír Duchek (Vice-Rector of UWB in Pilsen)
Milan Edl (Dean of Faculty of Mechanical Engineering)
Jan Řehoř (Head of Department of Machining Technology)
Jiří Česánek (Department of Machining Technology)
Vlastimil Volák (Director of Techmania Science Center)
Opening Ceremony
9:30-9:45
Stanislav Fiala, Jiří Plíšek, Karel Kouřil, Jan Řehoř, Jaroslava
Fulemová, Michal Povolný (FINAL TOOLS s.r.o.)
Development of new tool system for productive machining of very precise
holes
9:45-10:00
Miroslav Neslušan, Anna Mičietová, Juraj Uríček, Mária Čilliková
Influence thermoplastic deformation initiated turning operation on the
consecutive plasma nitridation and Barkhausen noise
10:00-10:15 Robert Kouba (GÜHRING s.r.o.)
Gühring Sulkov – project department
10:15-10:30 Nicolae Ungureanu, Miorita Ungureanu
“Seiso” – The cleaning of industrial equipments
10:30-10:45 Ivan Cimr (SOLIDVISION s. r. o.)
Presentation about the SolidVision company
10:45-11:15 COFFEE BREAK
11:15-11:45
H. Wolfgang Reichart (SIEMENS s.r.o.)
SINUMERIK-Technology-Application-Tips-tricks - New functions for the
SW 4.8 including Tips and Tricks for the commissioning engineer,
applications engineer and operator
11:45-12:00 Karol Vasilko
Titanium and technological problems of its machining
12:00-12:15 Andrej Palovčík (SANDVIK CZ s.r.o.)
Digital Machining
12:15-12:30
Antonín Kříž
Relationship between processing of aluminium alloys and the
appearance of their anodized surfaces
12:30-12:45 Tomáš Skopeček (GTW BEARINGS s.r.o.)
Presentation about the GTW BEARINGS company
12:45-14:00 LUNCH
14:00-14:15 Ivan Cimr, Věra Fišerová (SOLIDVISION s. r. o.)
Traditional milling strategies versus iMachining technology
14:15-14:30
Boris Pätoprstý, Peter Pokorný, Tomáš Vopát, Marek Vozár,
Vladimír Šimna
Influence of cutting edge preparation conditions on the cutting edge
radius and surface roughness
14:30-14:45 Slobodan Ilič (EOS GmbH)
Challenges and key topics for AM qualification in general
14:45-15:00
Peter Monka, Katarina Monkova, Jozef Jurko, Jozef Tkac, Lukas
Blasko, Ondrej Petruska
Investigation of modal characteristics of taps in relation to their tool
wear
15:00-15:15 František Plánička (GÜHRING s.r.o.)
Precise tools for automotive industry
15:15-15:30 Gabriel Nicodim Ciușca, Vasile Ceclan
Selective Laser Sintering Research of some Refractory Powders
15:30-15:45 Stanislav Fiala, Jiří Plíšek, Karel Kouřil (FINAL TOOLS s.r.o.)
Presentation about the FINAL TOOLS s.r.o. company
15:45-16:15 COFFEE BREAK
16:15-16:30
Marek Urban, Katarína Monková, Jan Řehoř
(GTW BEARINGS s.r.o.)
Asymmetrically loaded bearings in power industry
16:30-16:45
Karel Šramhauser, Nataša Náprstková, Pavel Kraus
Analysis of selected interchangeable cutting inserts made of cemented
carbide
16:45-17:00 Valdemar Neišl (OLYMPUS CZECH GROUP s.r.o.)
Analysis of a material with use of confocal laser microscopy
17:00-17:15
Marek Vozár, Jozef Peterka, Tomáš Vopát, Boris Pätoprstý
Multi-criteria analysis of drag finishing the cutting edges of solid carbide
mills
17:15-17:30
Vojtěch Rulc, Jiří Križan, Hynek Purš
(ADVANCED INGINEERING s. r. o.)
CAE for optimization of manufacturing tools
17:30-17:45
Šárka Houdková, Jiří Halml, Jan Schubert, Tomáš Skopeček, Petra
Frková, Ondřej Šubrt
The development of alternative technologies for hydrodynamic industrial
bearings lining application by thermal spraying and laser cladding
17:45-18:00 Jan Filipenský, Ondřej Vyklický (PLASMAMETAL spol. s r. o)
Application of thermal spray technology in the rail technology
18:00-18:05 CLOSING OF THE TECHNICAL SESSION
18:05-19:45 3D cinema in the Planetarium, guided tour through Techmania Science
centre expostion and further interesting informations
19:45-??? Social evening including dinner (buffet), special show with surprise and
raffle,accompaniment by LOVCI RYTMŮ band
PARALLEL PROGRAM - February 5th 2019
10:00-12:00
Seminar of additive manufacturing technology
Organiser: IHK-Regensburg, Bezirk Oberpfalz and RTI - UWB in Pilsen
CONFERENCE PROGRAM: Second day: February 6th
2019
8:55-9:00 OPENING THE SECOND DAY OF THE CONFERENCE
9:00-9:15
Jan Rybář, Vítězslav Suchý, Peter Pavlásek, Stanislav Ďuriš,
Miroslav Chytil
Approaches to checking non-contact eye tonometers
9:15-9:30
Jiří Martan, Martin Kučera, Aleš Franc
Fast temperature measurement in laser technologies by infrared
detectors
9:30-9:45 Miroslava Ťavodová, Daniela Kalincová, Richard Hnilica
Evaluation of abrasive wear of selected hard weld deposit materials
9:45-10:00
Tomáš Zatloukal, Miroslav Gombár, Jan Řehoř, Jaroslava
Fulemová, Michal Povolný
Analysis of the process of shaping hard coatings in terms of
technological parameters
10:00-10:15 František Holešovský
New advances in abrasive finishing technologies
10:15-10:45 COFFEE BREAK
10:45-11:45 ACTION "FORMULA UWB OR RELEASE THE KRAKEN" Showroom Techmania Science Center
11:45-12:00
CLOSING OF THE 8th YEAR OF THE INTERNATIONAL
CONFERENCE MANUFACTURING TECHNOLOGY - PILSEN
2019
12:00-13:00 LUNCH
13:00-15:00 Visiting of FME with possibility to see laboratories of DMT
Participants who want to visit FME must be registered during the first day.
We look forward to seeing you in February 2021
top related