conformity with section vii. technical specifications · 2021. 2. 2. · type: at least dynamic...
Post on 28-Feb-2021
2 Views
Preview:
TRANSCRIPT
1
REPUBLIC OF THE PHILIPPINES DEPARTMENT OF INFORMATION AND COMMUNICATIONS TECHNOLOGY NATIONAL TELECOMMUNICATIONS COMMISSION BIR Road, East Triangle, Diliman, Quezon City
Project ID : NTC-PB-RO-11-02
Project Name : Procurement for the Supply, Delivery, Installation, Testing and
Commissioning of IT Equipment for the Fixed and Mobile Broadband
Benchmarking Project of the National Telecommunications
Commission – Regional Office No. II Location of the Project : NTC – RO2, Tugegarao City, Cagayan
------------------------------------------------------------------------------------
CONFORMITY WITH SECTION VII. TECHNICAL SPECIFICATIONS
Item Specification Statement of Compliance
I. LAPTOP (12 sets)
I.1.1 Processor: Base Clock Speed: at least 1.6 GHz Max Turbo Frequency: 3.4 GHz Cache: 6mb Shared Cache No. of Cores: 4
I.1.2 Memory: 2x16 GB 2400mhz DDR4
I.1.3 Storage/Hard Disk: 512GB SSD
I.1.4 Front Camera: 720p HD webcam
I.1.5 Weight: 1.5kg (max.) including battery
I.1.6 Display Screen: 13.3” viewable size LED
I.1.7 Graphics/Video Processor: Integrated Graphics, Resolution: 1920x1080 pixel
I.1.8 Network Interface: Fast and Gigabit Ethernet 802.11ac Wifi wireless networking, IEEE 802.11, Bluetooth 4.1
I.1.9 Standard I/O Ports: 1 x USB type-C with Thunderbolt 2 x USB 3.1 Gen. 1 (1 Charging),1 x HDMI 1.4 1 x Micro-SD Card Reader
I.1.10 Pointing Device: Multi-Touch Trackpad
I.1.11 Battery: at least 6 hours of runtime
I.1.12 Security: Harddrive Wipe via BIOS
I.1.13 OS: Preloaded with Windows 10 Pro OS with built-in recovery for OS, drivers and utilities
I.1.14 Supplied with: Laptop Sleeve, Power Cord, Power Adaptor (Manufacturer’s Standard)
I.1.15 Accessories: VGA and HDMI adapter (branded), AC Wall Plug
I.1.16 Warranty: Three (3) Years on both parts and labor from authorized service centers with global repair coverage. One (1) years on Batteries. Supplier shall response within 24 hours for any technical assistance/support either telephone call, email or site visit (for NCR) upon verbal/writer notification by the end-user agency
I.1.17 Additional Features: The supplier shall supply ICT equipment which fulfills at least ENERGY STAR 6.1 for Computes and 7.0 for monitor criteria or equivalent. The supplier shall supply products with a visible On/Off button/switch. The supplier shall guarantee the availability of replacement of batteries and power supplies for at least 5years after end of production. Security features that can defend from Malicious Software and like upon beginning of the boot process.
Annex G
2
Item Specification Statement of Compliance
II MOBILE INTERNET MEASURING DEVICES FOR TESTING AND FIELD DEPLOYMENT
A. High-end mobile phone – six (6) sets
Item Specification
A.3
A.3.1 Network/ Technology : GSM / CDMA / HSPA / LTE
A.3.2 Speed: At least HSPA 42.2/5.76 Mbps, LTE-A (7CA) Cat20 2048/150 Mbps or equivalent/higher
A.3.4 SIM : Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by) or equivalent/higher
A.3.5 Display: At least Contrast ratio: Infinite (nominal), 4.514 (sunlight) or equivalent/higher Type: At least Dynamic AMOLED capacitive touchscreen, 16M colors or equivalent/higher Size : At least 6.4 inches, 103.8cm of equivalent Resolution: At least 1440 x 3040 pixels, 19:9 ratio or equivalent/higher
A.3.6 OS : Android 9.0 (Pie) or higher
A.3.7 Chipset: Exynos 9820 (8 nm) and/or HiSilicon Kirin 980 (7 nm) or equivalent
A.3.8 CPU: At least Octa-core (2x2.73 GHz Mongoose M4 & 2x2.31 GHz Cortex-A75 & 4x1.95 GHz Cortex-A55 or equivalent
A.3.9 GPU: Mali-G76 MP12 or Adreno 640 or equivalent
A.3.10 Memory: Internal: RAM : At least 8GB ; Storage: 128 GB
A.3.11 At least 2 MP, f/1.5-2.4, 26mm (wide), 1/2.55", 1.4µm, Dual Pixel PDAF, OIS
At least 12 MP, f/2.4, 52mm (telephoto), 1/3.6", 1.0µm, AF, OIS, 2x optical
zoom
At least 16 MP, f/2.2, 12mm (ultrawide), 1.0µm, Super Steady video
A.3.12 Camera: Photo / Video
A.3.13 WLAN : Wi-Fi 802.11 a/b/g/n/ac/ax, dual-band, Wi-Fi Direct, hotspot
A.3.14 Bluetooth: Yes
A.3.15 GPS Yes
A.3.16 USB : Type C
A.3.17 NFC: Yes
A.3.18 Sensors: Fingerprint (under display, ultrasonic), accelerometer, gyro, proximity, compass,
barometer, heart rate, SpO2 or equivalent/higher
ANT+
A.3.19 Battery: At least Non-removable Li-Ion At least 4100 mAh battery equivalent/higher
A.3.20 IP68 dust/water resistant
3
Item Specification Statement of Compliance
B. Mid-Range mobile phone six (6) sets
B.2
B.2.1 Network/ Technology : GSM / HSPA / LTE
B.2.2 Speed: HSPA, LTE-A
B.2.4 SIM : Nano-SIM
B.2.5 Display: Type: Super AMOLED capacitive touchscreen, 16M colors Size : 6.7 inches Resolution: 1080 x 2400 pixels
B.2.6 OS : Android 9.0 (Pie) or higher
B.2.7 Chipset: Qualcomm SDM675 or Snapdragon 675 (11 nm)/ or equivalent/higher
B.2.8 CPU: Octa-core (2x2.0 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver) or equivalent/higher
B.2.9 GPU: Adreno 612 or equivalent/higher
B.2.10 Memory: Internal: RAM : At least 6 GB ; Storage: 128 GB equivalent/higher
B.2.11 Main Camera: at least 5 MP, f/2.2, 0.8µm, PDAF
B.2.12 Front camera/Selfie Camera: at least 16 MP equivalent/higher
B.2.13 WLAN : Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
B.2.14 Bluetooth: Yes
B.2.15 GPS: Yes
B.2.16 USB : Type C
B.2.17 NFC: Yes
B.2.18 Sensors: Fingerprint, accelerometer, proximity, compass
ANT+
B.2.19 Battery: At least Non-removable Li-Po 3765 mAh battery equivalent/higher
4
Item Specification Statement of Compliance
C. Low-End mobile phone six (6) sets
C.1
C.1.1 Network/ Technology : GSM / HSPA / LTE
C.1.2 Speed : HSPA, LTE-A
C.1.3 Dimension : 155.9 x 75.4 x 8.2 mm (6.14 x 2.97 x 0.32 in) or higher Weight : 183 g or lighter
C.1.4 SIM : Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
C.1.5 Display: Type : IPS LCD capacitive touchscreen, 16M colors Size : 6.2 inches or higher Resolution: 720 x 1520 pixels or higher
C.1.6 OS : Android 8.0 (Oreo) or higher
C.1.7 Chipset : Qualcomm SDM450 Snapdragon 450 (14 nm) or Mediatek MT6765 Helio P35 or equivalent
C.1.8 CPU : Octa-core 1.8 GHz Cortex-A53 or equivalent
C.1.9 GPU : Adreno 506 or PowerVR GE8320 or higher
C.1.10 Memory: Internal: RAM : 2 GB ; Storage: 32 GB
C.1.11 Main Camera:
At least 13 MP f/1.8 or f/2.2
C.1.12 Front camera/Selfie Camera: 8 MP, f/2.0
C.1.13 WLAN : Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
C.1.14 Bluetooth : Yes
C.1.15 GPS : Yes
C.1.16 USB : Type C or microUSB 2.0
C.1.17 NFC : No
C.1.18 Sensors: Fingerprint (rear-mounted), accelerometer, proximity, compass
C.1.19 Battery: Non-removable Li-Po or Li-ion with at least 4000 mAh equivalent/higher
5
Item Specification Statement of Compliance
D. Mobile phone (iOS handsets) – six (6) sets
D.1
D.1.1 Network/ Technology : GSM / HSPA / LTE
D.1.2 Speed: HSPA 42.2/5.76 Mbps, LTE-A, EV-DO Rev.A 3.1 Mbps
D.1.3 Dimensions : 150.9 x 75.7 x 8.3 mm (5.94 x 2.98 x 0.33 in) Weight : 202 g or lighter
D.1.4 SIM : Nano-SIM
D.1.5 Display: Type: Retina IPS LCD capacitive touchscreen, 16M colors Size : 5.5 inches Resolution: 828 x 1792 pixels
D.1.6 OS : iOS 11, upgradable to iOS 13.2 or higher
D.1.7 Chipset : Apple A11 Bionic (10 nm) or higher
D.1.8 CPU: Hexa-core (2x Monsoon + 4x Mistral) or higher
D.1.9 GPU: Apple GPU (three-core graphics) or higher
D.1.10 Memory: Internal: RAM :3 GB ; Storage: 64 GB
D.1.11 Main Camera: 12 MP, f/1.8, 28mm (wide), PDAF, OIS
D.1.12 Front camera/Selfie Camera: 7 MP, f/2.2, 32mm (standard)
D.1.13 WLAN : Wi-Fi 802.11 a/b/g/n/ac, dual-band, hotspot
D.1.14 Bluetooth: 5.0, A2DP, LE
D.1.15 GPS Yes
D.1.16 USB : 2.0, proprietary reversible connector
D.1.17 NFC: Yes
D.1.18 Sensors: Accelerometer, gyro, proximity, compass, barometer
D.1.19 Battery: Non-removable Li-Ion 2691 mAh or equivalent/higher
D.1.20 IP67 dust/water resistant
Notes:
Bidder should be an accredited reseller/distributor for mobile phones.
Bidders should at least be a certified and/or have partnership with an
accredited Apple distributor
6
Item Specification Statement of Compliance
E Polymer Hard Case – three (3) sets
E.1 Features
E.1.1 Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
E.1.2 O-ring seal
E.1.3 Watertight, crushproof, and dustproof
E.1.4 Open cell core with solid wall design - strong, light weight
E.1.5 Easy open Double Throw latches
E.1.6 Easy open Double Throw latches
E.1.7 Strong polyurethane wheels with stainless steel bearings
E.1.8 Stainless steel hardware and padlock protectors
E.1.9 Retractable extension handle
E.1.10 Comfortable rubber over-molded top and side handles
E.2 Specifications
E.2.1 Interior (L X W X D); 19.75" X 11.00" X 7.60" (50.2 X 27.9 X 19.3 Cm)
E.2.2 Exterior (L X W X D): 22.00" X 13.81" X 9.00" (55.9 X 35.1 X 22.9 Cm)
E.2.3 Weight o Weight With Foam: 13.60 Lbs (6.2 Kg)
o Weight Empty: 11.99 Lbs (5.4 Kg)
E.2.4 Buoyancy: 64.15 Lbs (29.1 Kg)
E.2.5 Body: Polypropylene
E.2.6 Latch: Abs
E.2.7 O-ring: Polymer
E.2.8 Pins: Stainless Steel
E.2.9 Foam: 1.3 Lb Polyurethane
E.2.10 Purge Body: Abs
E.2.11 Purge Vent: 3 Micron Hydrophobic Non-woven
E.2.12 Wheels: 2
E.2.13 Extendable Handle: Yes
7
Item Specifications Statement of
Compliance
III Hardware Verifier (Network/Protocol Analyzers)
Two (2) sets
1. Each set is composed of one (1) pair of main unit, modules, and
accessories.
1.1. User Interface
1.1.1. Active TFT display
1.1.2. Touchscreen functionality
1.1.3. Supported Language: English
1.2. Data/Service Interface
1.2.1. 2 x USB data interface – for data extraction (compatible
for mouse device)
1.2.2. Ethernet
10M/100M/1000M, RJ45 connector
100/1G/10G, SFP/SFP+ optical interface
1.3. Accessories
1.3.1. Battery
1.3.1.1. Rechargeable and can be easily replaced
1.3.1.2. Operating Time: 2 - 5 hours
1.3.1.3. Remaining capacity indicator
1.3.2. Charger/Mains Adapter
1.3.2.1. Input: 100 - 240 Vac, 50 Hz/60 Hz
1.3.2.2. Output: DC voltage and current must be compatible
with device requirements
1.3.3. Other accessories – clock cable/stylus/6 foot RJ-45 cable /
soft carry case / power supply
1.4. Environmental Operating Conditions
1.4.1. Temperature
1.4.1.1. Operating: 0° to +50°C (noncondensing)
1.4.1.2. Charging: 0° to +50°C (noncondensing)
1.4.1.3. Storage: –20° to +60°C
1.4.2. Humidity
1.4.2.1. Operating: 10 - 90% RH (without condensing)
1.4.2.2. Storage and Transportation: 10 - 95% RH (without
condensing)
1.5. Compliance/Certification
1.5.1. CE Class A Compliant
1.5.2. EMI/ESD: CE compliant, FCC part 15
8
subpart A Class A
1.5.3. FCC Part 15 Compliant
1.5.4. Laser Safety: IEC 60825-1: 2007 CLASS 1,
21CFR1040.10
1.6. 10G Multirate transport interface
1.6.1. Supports the following: OTN (OTU1, OTU2), ethernet (10 Mbps, 100 Mbps, 1 Gbps), ethernet 1G/10G Optical single channel
1.6.2. Available Interface: RJ45, SFP/SFP+
1.6.3. The system should be able to perform and support the
following tests, measurements, and functionalities:
1.6.3.1. Ethernet Tests
1.6.3.1.1. Ethernet tests up to 10Gbps
1.6.3.1.2. IPv4 and IPv6
1.6.3.1.3. TCP throughput (RFC6349), Y.1564, IEEE
1588 v2, RFC 2544, ping, traceroute, BER,
multistream, OAM, SyncE, MPLS, MPLS-TP,
VLAN, VLAN Stacking (Q-in-Q), VPLS,
MAC in MAC /PBT /PBB, Delay, Loopback,
Network discovery, Monitor mode
1.6.3.1.4. Available filters – to extract relevant parts of
traffic
1.6.3.1.5. Thresholds – to highlight abnormalities
2. Other Items
2.1.1. Optical Transceiver
2.1.1.1. Quantity: Two (2) pieces per set, four (4) pieces of
total number of items to be delivered
2.1.1.2. SFP+
2.1.1.3. Data rate up to 10 Gbps
2.1.1.4. 1310nm center wavelength
2.1.1.5. DFB laser transmitter, PIN photo detector receiver
2.1.1.6. -8 to -0.5 dBm TX output power
2.1.1.7. -12 dBm RX sensitivity
2.1.1.8. 3.3V supply voltage
2.1.1.9. LC/UPC connector duplex
2.1.1.10. Compliant to IEEE 802.3ae standard (optical
interface)
2.1.1.11. Compliant to SFF-8431 (electrical interface)
2.1.1.12. RoHS6 compliant (lead free)
9
2.1.2. Video inspection probe for optical connectors
2.1.2.1. Quantity: One (1) unit per set, two (2) units of total
number of items to be delivered
2.1.2.2. Switchable 200x/400x digital probe magnification
2.1.2.3. Auto pass/fail analysis based on IEC 61300-3-35
standard
2.1.2.4. USB interface
2.1.2.5. Report generation capability
2.1.2.6. Includes pre-installed drivers and software
2.1.2.7. Includes connector tips - universal (1.25mm PC male 2.5mm PC male 2.5mm APC male), bulk head (1.25mm PC female (LC) 2.5mm PC female (FC) 2.5mm PC female (SC) 2.5mm APC Female (SC))
2.1.3. Items 2.1.1 and 2.1.2 must be compatible with Item 1
(main hardware unit)
3. Post Qualification
3.1. Trial testing within five (5) working days.
4. Warranty
4.1. At least three (3) years
5. Delivery
5.1. Sixty (60) calendar days upon receipt of Notice to Proceed
(NTP)
5. Others
5.1. It should be noted that the above listed specifications are
minimum specifications, bidders are encouraged to provide
better specifications in their bids so long as it does not deviate
too much from the intent of the original specifications.
5.2. The winning bidder should conduct a training/workshop about
the operation and usage of the equipment to be procured. The
training should be conducted within the prescribed delivery
period, that is, sixty (60) calendar days upon receipt of NTP.
5.2.1. Estimated No. of Participants: Four (4) persons / per region
5.2.2. Duration: Two (2) days
5.2.3. Tentative Venue: NTC Central Office
5.2.4. The schedule of training/workshop shall be agreed upon
with the End-user.
10
Item Specification Statement of Compliance
IV SPECTRUM ANALYZER AND ENGINEERING PHONE
A. Spectrum Analyzer – One (1) Set
A.1
1. Frequency range must be from 30KHz to 26.5GHz
2. Spectrum Analyzer can be controlled freely via software in laptop/tablet
or mobile view
3. A soft carrying case must be included for the Spectrum Analyzer
4. Spectrum Analyzer operational time when fully charged must be at least
3.5 hours
5. Spectrum Analyzer full charging time must be at least 8 hours
6. SSB Phase Noise must be -113dBc/Hz typ at f=500MHz, which is a good
phase noise that enables the analyzer to resolve signals of high and low
amplitude
7. Spectrum Analyzer weight must not exceed 3.2kg
8. Spectrum Analyzer must include a directional antenna (antenna handle
and antenna module)
9. Spectrum Analyzer must have Interference Analysis that can be used for
interference hunting
10. Spectrum Analyzer must have a capability to be charged using a car
adapter accessory
11 Spectrum Analyzer must have AM/FM modulation analysis
12. Spectrum Analyzer DANL (Displayed Average Noise Level) should have -
148 dBm for better sensitivity
13. Warranty : at least three (3) Years
A.2 Directional Antenna
1. Handheld directional antenna
B. Engineering Phone – Two (2) sets
1. Engineering phone must be in Android and has either a Qualcomm or
Exynos chipset
2. Must support 2G, 3G, 4G measurements Support up to LTE-A 7CC
3. Supports Ping Testing
4. Supports Ookla Testing (with logfile)
5. Must support complex measurement scripts with intuitive user interface
6. Supports voice testing with PESQ and POLQA
7. Supports YouTube video streaming testing
8. Supports HTTP browsing test
9. Support SFTP/FTP DL and UL test
10. MOS standard for voice and video must be an ITU-T standard to ensure
quality and accepted standard for testing voice and video streaming
11
11. Support SMS and Email send/receive feature (with logfile)
12. Support PEVQ-S for Video Streaming Quality test
13. Support for Facebook, LinkedIn, Twitter, Line, Netflix, Instagram, BiP,
Dropbox, WhatsApp, Viber testing
14. As an option, support centralized remote control via cloud-based
platform
15. As an option, manage routes for drive testing remotely with turn-by-turn
navigation
16. As an option, create fast and efficient report in the field instantly
17. Must support measurement playback software on PC
18. Must support measurement playback feature on phone
19. Support IP packet capture to measure application level data. Data is
collected in a separate log file in .pcap format
20. Support for preconfigured test cases including voice call, downlink and
uplink data transfer and coverage
21. Support log file splitting either by size limit or length limit
22. Must support forcing feature such as system lock (RAT), band lock,
channel (ARFCN) lock in GSM, carrier (UARFCN) and scrambling code lock
in UMTS, and carrier (EARFCN) and PCI lock in LTE
23. As an option, supports advanced indoor analysis for in-depth
troubleshooting
Warranty: at least 1 year
C. Others
1. Training:
The winning bidder should conduct a training/workshop about the
operation and usage of the equipment
The schedule of training/workshop shall be agreed upon with the
End-user
Duration: two (2) days
2. Delivery: Sixty (60) calendar days upon receipt of Notice to Proceed
Notes:
Bidder should be an accredited supplier / reseller / distributor
or at least a certified and/or have partnership with an
accredited supplier /distributor of analyzer and engineering
phone.
12
Item Specification Statement of Compliance
V FIXED AND MOBILE MEASUREMENT FACILITY AND SERVER
A. SERVER - Two (2) sets
A.1 Specifications
A.1.1 Processor: 2 x Ten-Core Intel Xeon Gold 5215 2.5G, 10C/20T, 10.4GT/s, 13.75M Cache, Turbo, HT (85W)
A.1.2 Memory: 2x 32GB RDIMM, 2666MT/s, Dual Rank
A.1.3 Dual-Port 1GbE On-Board LOM
A.1.4 Intel Ethernet I350 Dual Port 1Gb Server Adapter
A.1.5 Raid Controller:
H740P RAID Controller, 8GB NV Cache or equivalent
supports 12Gb/s SAS ,6Gb/s SATA
A.1.6 Hard drives:
2x 300GB 15K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard
Drive, 3.5in HYB CARR
4x 8TB 7.2K RPM NLSAS 12Gbps 512e 3.5in Hot-plug Hard
Drive
A.1.7 Chassis:
with up to 8, 3.5" Hot-Plug Hard Drives support
Rack Configuration
A.1.8 Dual, Hot-plug, Redundant Power Supply (1+1), 1100W
A.2 Others
A.2.1 No Trusted Platform Module
A.2.2 No Operating System
A.2.3 With Remote Access Controller or Manager
A.2.4 With Server/system manager
A.2.5 Jumper Cord & accessories
A.2.6 No Bezel
A.2.7 No Internal Optical Drive
A.3 Warranty & Support
A.3.1 At least three (3) years services/labor Support with Next Business Day Onsite Service
A.3.2 At least three (3) years equipment warranty
A.4 Installation
A.4.1 To be installed at NTC Regional office(s)
13
Item Specification Statement of Compliance
VI POWER INVERTER & SOLAR PANEL
F.1 Inverter – Three (3) units
F.1.1 Continuous Power : 2000W
F.1.2 DC Voltage: 12 V
F.1.3 AC Voltage: 220VAC
F.1.4 Frequency 60Hz
F.1.5 Wave form : Pure Sine wave
F.1.6 Output Efficiency : Highest 94%
F.1.7 Protection
Low/Overvoltage
Overload
Over Temperature
Short Circuit
Input Oppose
F.2 Solar Panel – Three (3) units
F.2.1 Current Maximum Power: 5.55A
F.2.2 Voltage Maximum Power: 18V
F.2.3 Short Circuit Current: 5.88A
F.2.4 Open Circuit Voltage: 21.6V
F.2.5 Maximum System Voltage: 1000VDC
F.2.6 Cell Technology: Monocrystalline
F.3 VRLA Type Battery – Three (3) units
F.3.1 Voltage: 12V
F.3.2 Capacity: 100Ah
F.3.3 Type/Category: VRLA
F.4 Charge Controller Three (3) units
F.4.1 Nominal System Voltage: 12V
F.4.2 Rated Charge/battery Current: 30A
F.4.3 Rated Discharge/Load Current: 30A
F.4.4 Battery input Voltage: 8-32V
F.4.5 Equalize charging voltage: Sealed : 14.6V , Flooded 14.8V
F.4.6 Boost Charging Voltage: Gel: 14.2V , Sealed: 14.6, Flooded: 14.8V
F.4.7 Float charging voltage: 13.8V
F.4.8 Low voltage reconnect voltage: 12.6V
F.4.9 Low voltage disconnect voltage: 11.1V
F.4.10 Other Features
F.4.11 • Advance MPPT Technology
F.4.12 • High tracking efficiency no less than 99.5%
F.4.13 • Peak conversion efficiency of 98%
F.4.14 • Multi-function LCD displays system information intuitively
14
F.4.15 • RS485 port with industrial standard MODBUS open architecture
F.4.16 • Common positive grounding design
F.5 Cables & connectors – Three (3) sets
F.5.1 DC Cables 6mm 20m
F.5.2 MC4 Connectors, Battery Terminals
F.6 Warranty
F.6.1 At least one (1) year Warranty
F.7 Installation
F.7.1 Location (to be installed at regional office(s) three (3) service
vehicles )
Shall include installation of complete with accessories, brackets,
other materials to complete the installation.
Note: It should be noted that the above listed specifications are minimum specifications, bidders are encouraged to provide better specifications in their bids so long as it does not deviate too much from the intent of the original specifications. Bidders shall provide at least three (3) different models of mobile phones for items II (A-D)
I hereby certify that the Statement of Compliance to the foregoing Technical Specifications are true
and correct, otherwise, if found false either during the bid evaluation or post-qualification, the same
shall give rise to automatic disqualification of our bid.
______________ _______________________________ ___________
Name of Company/ Signature Over Printed Name Date
Bidder of Authorized Representative
* Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of
each Specification stating the corresponding performance parameter of the equipment offered. Statements of
“Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that
evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional
statements of specification and compliance issued by the manufacturer, samples, independent test data etc.,
as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by
the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the
Bidders statement of compliance or the supporting evidence that is found to be false either during Bid
evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the
Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC
Clause 2.1(a)(ii)
top related