construction standards used - hku librariesebook.lib.hku.hk/hkg/b35843020.pdf · construction...
Post on 06-Feb-2018
387 Views
Preview:
TRANSCRIPT
CONSTRUCTION STANDARDS USED
in
HONG KONG
(DECEMBER 1998)
^;f;:p,.J,BOOKS REGISTRATION ORDINANCE
Chapter 142
No.: HK tilCOMPILED BY
CONSTRUCTION STANDARDS COMMITTEE OFTHE CONSTRUCTION ADVISORY BOARD
WORKS BUREAU
j BIB. REG. HO.1 DATE REC'D1 CLASS HO. I-:| AUTHOR TO.
_-.l MAY 1899.- j
C '•'• j
Copyright© bythe Government of the Hong Kong Special Administrative Region
Third edition, December 1998
Compiled by:Construction Standards Committee of
the Construction Advisory Board
Works Bureau
CONTENTS
Page
Introduction iv
Notes to Readers v
Abbreviations vi - viii
Group and Subgroup Index ix - x
Construction Standards used in Hong Kong 1 -197
Appendix I : Terms of Reference of the Construction Standards Committee 198
Appendix II: Membership of the Construction Standards Committee 199
Appendix in : Readers' Suggestion Form 200
-in-
Introduction
The compilation of construction standards used in Hong Kong was first published inJune 1993 by the Construction Standards Committee. In August 1994, it became one of theworking committees under the Construction Advisory Board which is to keep under reviewand to advise the Government through the Secretary for Works on construction industry issues.The Terms of Reference and Membership of the Committee are at Appendix I and Appendix IIrespectively. The Committee published the second edition in July 1996.
This third edition (December 1998) expanded the collection by includingconstruction standards used in the major quasi-government organisations and public utilitycompanies such as the Airport Authority Hong Kong, Mass Transit Railway Corporation,Hong Kong and China Gas Company Limited, Hong Kong Electric Company Limited andHong Kong Telecommunications Limited. This edition also improved the classificationsystem of the standards contained in the collection so as to provide more information about thetype of standards.
This edition will be available on Internet through the Works Bureau Homepage athttp://www.wb.gov.hk.
-IV-
Notes to Readers
L The contents in this collection are for reference only and subject to changes from time to time. Readers should makereference to the latest catalogues published by the relevant standard organisations for accurate descriptions of the standards,their status, and any subsequent amendments or supplements. Readers should also approach the relevant governmentdepartments and organisations regarding which versions or parts of the standards are being used by them.
2. Readers are invited to make suggestions for future improvement in this collection to members of the Construction StandardsCommittee using the Form at Appendix III. This collection will be periodically reviewed by the Construction StandardsCommittee and new editions will be issued thereafter.
3. The construction standards are arranged under the relevant 'Group' and 'Subgroup' of works fields and are listed inalphabetical order. They are further arranged in ascending order in the 'Number' and 'Year' columns. The index for"Group" and "Subgroup" is shown on pages ix and x.
4. In the 'Year' column, an additional year with brackets means that in that year the standard has been reviewed and confirmedstill relevant. The year of a standard is not shown in the 'Year' column if such standard contains a number of parts whichhave been issued at difference years. Readers are requested to make reference to the catalogues published by the relevantstandard organisations.
5. In the "Type" column, standards are broadly classified into two major categories: Technical Regulations (TR) compliancewith which are mandatory; and Standards compliance with which are voluntary. Standards are further classified into fivesub-categories: Products Standards (PDS), Process Standards (PSS), Services Standards (SS), Testing Standards (TS) andOther Standards (OS).
-v-
Abbreviations
The following abbreviations are used for
a) USER ORGANISATIONS
A Architectural Services DepartmentAAHK Airport Authority Hong KongB Buildings DepartmentC Civil Engineering DepartmentD Drainage Services DepartmentEm Electrical and Mechanical Services DepartmentEp Environmental Protection DepartmentH Housing Department
HEC Hong Kong Electric Company LimitedHKCG Hong Kong and China Gas Company LimitedHKT Hong Kong Telecommunications LimitedHy Highways DepartmentMTRC Mass Transit Railway CorporationT Territory Development DepartmentW Water Supplies Department
b) Elsewhere -
AAMAAASHTOANSIAOACAPHAAPIAPLEASASCEASDASHRAEASMEASTMAWWA
American Architectural Manufacturers AssociationAmerican Association of State Highway and Transportation OfficialsAmerican National Standards InstituteAssociation of Official Analytical ChemistsAmerican Public Health AssociationAmerican Petroleum InstituteAssociation of Public Lighting EngineersAustralian StandardAmerican Society of Civil EngineersArchitectural Services Department, Government of HKSARAmerican Society of Heating, Refiigerating and Air-conditioning Engineers, Inc.American Society of Mechanical EngineersAmerican Society for Testing and MaterialsAmerican Water Works Association
-VI-
BABDBREBSBSENCAP XXXCEDCFRCIBSECIRIACISCACLPCPCS 1&2CS4(HSE)DINDOTDSDDWEMSDENEPDFAA-ACFOCFSDGEOGSCEWGUHKCG/SER/OPXHKIEHKQAAHKSARHOIHS(G)
Building Authority, HKSARBuildings Department, Government of HKSARBuilding Research Establishment, UKBritish StandardBritish Version of European StandardLaws of Hong Kong Chapter XXXCivil Engineering Department, Government of HKSARCode of Federal Regulation (Department of Transportation, USA)The Chartered Institution of Building Services EngineersConstruction Industry Research and Information AssociationCeilings and Interior Systems Construction AssociationChina Light & Power Co. Ltd.Code of PracticeConstruction Standard - Testing Concrete & Reinforcement, Government of HKSARChemical Safety 4 (Health & Safety Executive, UK)German Industry StandardBritish Departmental Standard, Department of TransportDrainage Services Department, Government of HKSARCoding standards for air ductwork by the Heating and Ventilating Contractors' AssociationElectrical and Mechanical Services Department, Government of HKSAREuropean StandardEnvironmental Protection Department, Government of HKSARFederal Aviation Administration - Advisory Circular (USA)Fire Officers' CommitteeFire Services Department, Government of HKSARGeotechnical Engineering Office, Government of HKSARGeneral Specification for Civil Engineering Works, Government of HKSARGas Utilisation Guidance Notes, EMSDHong Kong & China Gas Co. Ltd./Services/Operation Procedure XHong Kong Institution of EngineersHong Kong Quality Assurance AgencyHong Kong Special Administrative RegionHighways Office Instruction, Government of HKSARHealth & Safety Executive, UK (Guidelines)
-vn~
HyDHyDTCICAOIECIGEIPISOISRMLPCLPGAMS-2NFPAOSHAPDPNRD/GNRNSILTECHSISSMMBWSMMCEWSSPCTDDTPDMUICUKRRLULWBWBTCWHOWSD
Highways Department, Government of HKSARHighways Department Technical CircularInternational Civil Aviation OrganisationInternational Electrotechnical CommissionInstitution of Gas Engineers, UKInstitute of PetroleumInternational Organisation for StandardisationInternational Society for Rock MechanicsLoss Prevention Council, UKLiquefied Petroleum Gas Industry Technical AssociationManual Series No. 2 (Asphalt Institute, USA)National Fire Protection AssociationOccupational Safety and Health AdministrationBritish Standards Institution Published DocumentPractice NoteGuidance Note issued by Research and Development Division, Highways DepartmentHighways Department Road NoteThe Standing Inter-Departmental technical Group on Landscape Design, Implementation and MaintenanceSwedish StandardStandard Method of Measurement for Building Works, Government of HKSARStandard Method of Measurement for Civil Engineering Works, Government of HKSARSteel Structures Painting CouncilTerritory Development Department, Government of HKSARTransport Planning and Design Manual published by Transport Department, Government of HKSARInternational Union of RailwaysUnited Kingdom Road Research Laboratory (now TRL)Underwriter Laboratory, USAWorks Bureau, Government of HKSARWorks Bureau Technical CircularWorld Health OrganisationWater Supplies Department, Government of HKSAR
-vm~
Group and Subgroup Index
GROUP
AIRPORTS
BUILDINGSERVICES
BUILDINGS
SUBGROUP GROUP
Aircraft Bridges BUILDINGSAircraft Pavement (Cont'd)Airfield ConfigurationMiscellaneous DRAINAGE
SERVICESAir-conditioningEnergy EfficiencyFire Services ELECTRICAL &Heating & Ventilation MECHANICALLifting AppliancesLifts & EscalatorsLighting & PowerSecurity SystemSound SystemTelecommunication
Access for DisabledChimney & FireplacesCladding/TilesCurtain Walls/GlazingDoors & WindowsInsulating MaterialsMeans of EscapeMiscellaneousPartition, Ceiling, Wall &
WallPlumbingRoofs
SUBGROUP
Sound InsulationThermal Insulation
OutfallSewerageDrainage
ConveyorsEarthing InstallationsFixed Electrical
InstallationsFuel DispensingEquipmentGatesLaundry MachineryLuminairesMiscellaneousMotorised Drives &MachineryOil Burning EquipmentPressure VesselsSubstationSwitchgearTransformersUPS & Emergency
GeneratorsValves & PumpsWiring & Cables
GROUP SUBGROUP
ENVIRONMENT AirEffluentEnergyGeneralNoiseWaste
FOUNDATIONS GeneralPilingRetaining Walls
GAS SUPPLY GeneralFuel gas InstallationsFlueing & VentilationPipeline
GEOTECHNICAL & BlastingEARTHWORKS Cavern Works
Earth Retaining WallExcavation and Site
FormationGeotechnical WorksGround Investigation
-IX-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
AIRPORTS
Aircraft Bridge
Aircraft Bridge
Aircraft Bridge
Aircraft Bridge
Aircraft Bridge
Aircraft Bridge
Aircraft Bridge
Aircraft Pavement
Aircraft Pavement
Aircraft Pavement
Airfield Configuration
Airfield Configuration
Airfield Configuration
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS2618
BS 5400: Part 1
BS 5400: Part 3
BS 5400: Part 4
BS 5400: Part 5
BS 5400: Part 9
NFPA417
BS 7533: Part 3
FAA-AC150/5320-6C
ICAO
ICAO
ICAO
ICAO
BS 3224
BS4G173
BS4G 173: Parti
BS4G173:Part2
BS 7867
CAP 301
CAP 301
CAP 301
1975(1990)
1988
1982
1990
1979
1983
1990
1997
1978
1997
1997
1996
1997
1985
1985
1997
Specification for electric traction equipment
Steel, concrete and composite bridges - general statement
Code of practice for design of steel bridges
Code of practice for design of concrete bridges
Code of practice for design of composite bridges
Bridge bearings
Aircraft loading walkways
Pavement constructed with clay, natural stone or concrete pavers- Code of practice for laying precast concrete paving blocks andclay pavers for flexible pavements
Advisory circular - airport pavement design and evaluation
Aerodrome design manual - Part 3: pavement
Aerodrome design manual - Part 2: taxi ways, aprons and holdingbays
Aerodrome design manual - Part 1: runway
Aerodrome design manual - Annex 14: international standardsand recommended practice aerodromes
Lighting fittings for civil land aerodromes
Connectors for ground electrical supplies for aircraft
Specification for design, performance and test requirements
Specification for dimensions
Specification for portable fire extinguishers for use in aircraft
Hong Kong Airport (Control of Obstructions) Ordinance
Hong Kong Airport (Control of Obstructions) (Consolidation)Order
Hong Kong Airport (Control of Obstructions) (Lighting)(Consolidation) Order
AAHK
A,B,C,Em,Hy
A,B,C,Em,Hy
A,B,C,Em,Hy
A,B,C,Em,Hy
A,B,C,Em,Hy
AAHK
AAHK
PDS
OS
PSS
PSS
PSS
PDS
PDS
PSS
A,Em,Hy PSS
A,Em,Hy
A, Em
A,Em
A,Em
AAHK
AAHK
AAHK
AAHK
A
PSS
PSS
PSS
PSS
PDS
PDS
PSS
PDS
PDS
TR
TR
TR
- 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
Air-conditioning
ASD
BS 3790
BS 3928
BS 4434
BS4718
BS 4856:
BS 4857:
BS 4857:
BS 4954:
BS 4954:
BS 4979
BS 5422
BS5491
BS 6540
Part 5
Parti
Part 2
Parti
Part 2
1997
1995
1969
1995
1971
1979
1972(1983)
1978(1983)
1973(1987)
1978(1987)
1986
1990
1977(1986)
1985
General specification for air-conditioning, refrigeration,ventilation and central monitoring and control systeminstallation in Government Building H.K.
Specification for endless wedge belt drives and endless V-beltdrives
Method for sodium flame test for air filters (other than for airsupply to I.C. engines and compressors)
Specification for safety and environmental aspects in the design,construction and installation of refrigerating appliances andsystems
Methods of test for silencers for air distribution systems
Methods for testing and rating fan coil units, unit heaters and unitcoolers - acoustic performance; with ducting
Methods for testing and rating terminal reheat units for airdistribution systems - thermal and aerodynamic performance
Methods for testing and rating terminal reheat units for airdistribution systems - acoustic testing and rating
Methods for testing and rating induction units for air distributionsystems - thermal and aerodynamic performance
Methods for testing and rating induction units for air distributionsystems - acoustic testing and rating
Methods for aerodynamic testing of constant and variable dualduct or single duct boxes, single duct units and induction boxesfor air distribution systems
Method for specifying thermal insulating materials on pipes,ductwork and equipment (in the temperature range -40°C to+700°C)
Specification for rating and testing unit air conditioners of above7kW cooling capacity
Air filters used in air-conditioning and general ventilation
A,Em,Ep,H,HEC
A,AAHK,Em,H
A,Em,H
A,Em,H,MTRC
AAHK
A,Em,H
A,Em,H
A,Em,H
A,Em,H
A,EmJi
A,Em,RHEC
AJEm,H,HEC
AAHK
A,Ep,H,HEC,MTRC
PDS
PDS
TS
PSS
TS
TS
TS
TS
TS
TS
TS
PDS
TS
PDS
- 2 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Air-conditioning
BUILDING SERVICES Air-conditioning
BUILDING SERVICES Air-conditioning
BUILDING SERVICES Air-conditioning
BUILDING SERVICES Air-conditioning
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Energy Efficiency
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BS EN 779
CAP 123
CIBSE
EMSD
1993
1986
1998
UL900 1982
ASHRAE114 1986
ASHRAE90.1 1989
BS 8207
BS8211
BS 8211: Parti
CAP 123
CIBSE BuildingEnergy Code: Part1
CIBSE BuildingEnergy Code: Part2a
1985(1995)
1988(1995)
1977
1981
CIBSE Building 1979Energy Code: Part3
CIBSE Building 1982Energy Code: Part4
ANSI/UL 1247
ANSI/UL 555
ASD 1997
PDSPaniculate air filters used for general ventilation. Requirements, A,Em,Ep,Htesting, marking conditioning and general ventilation
Building (Ventilating Systems) Regulations
CIBSE guide volume A1-A10, B1-B18, C1-C7
Code of practice for energy efficiency of air conditioninstallations
Standard for test performance of air filter units
Energy management control systems instrumentation
Energy efficient design for new buildings except low-riseresidential buildings
Code of practice for energy efficiency in buildings
Energy efficiency in housing
Code of practice for energy efficient refurbishment of housing
Building (Energy Efficiency) Regulations
Guidance towards energy conserving design of buildings andservices
Calculation of energy demands and targets for the design of new A,Eni PSSbuildings
Guidance towards energy conserving operation of buildings and A,Em,Ep,H PSSservices
Measurement of energy consumption and comparison with A,Em,Ep TStargets for existing buildings
Diesel engines for driving centrifugal fire pumps HEC PDS
Fire dampers HEC PDS
General specification for fire service installation in government A,Em,H3HEC PDSbuilding, HK
HEC
Em,H
A,Em,H,MTRC
AAHK
A,Em
A,Em,Ep,HEC
A,Em
A,Em
A,Em,Eo.H
TR
OS
PSS
TS
OS
PSS
PSS
PSS
PSS
TR
PSS
-3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
ASTME814
BS336
BS 4422
BS 4422: Part 1
BS 4422: Part 3
BS 4422: Part 4
BS 4422: Part 5
BS 5041
BS 5041: Parti
BS 5041: Part 2
BS 5041: Part 3
BS 5041: Part 4
BS 5041: Part 5
BS 5274
BS 5306
BS 5306: Part 0
BS 5306: Part 1
BS 5306: Part 2
BS 5306: Part 3
BS 5306: Part 4
BS 5306: Part 5Section 5.1
1989
1987
1990
1994
1989
1987
1987
1975(1987)
1975(1987)
1974(1987)
1985
1986
1976(1988)
1990
1985
1986
1992
Test Method for Fire Tests of Through-Penetration Fire Stops
Specification for fire hose couplings and ancillary equipment
Glossary of terms associated with fire
General terms and phenomena of fire
Fire detection and alarm
Fire extinguishing equipment
Smoke control
Fire hydrant systems equipment
Specification for landing values for wet risers
Specification for landing values for dry risers
Specification for inlet breechings for dry riser inlets
Specification for boxes for landing values for dry risers
Specification for boxes for foam inlets and dry riser inlets
Specification for fire hose reels (water) for fixed installations
Fire extinguishing installations and equipment on premises
Guide for the selection of installed systems and other fireequipment
Hydrant systems, hose reels and foam inlets
Specification for sprinkler systems
Code of practice for selection, installation and maintenance ofportable fire extinguishers
Specification for carbon dioxide systems
Specification for halon 1301 total Hooding systems
MTRC
A,AAHK,Em,H
A,Em
A,Em
A,Em,HEC
A,Em,HEC
A,Em,HEC
A,Em,HEC,MTRC,W
A,Em,H,HEC,W
A,Em,H,HEC,W
A,Em,H,HEC,W
A,Em,H,HEC,W
A,Em,H,HEC,W
MTRC
A,AAHK,Em,H,HEQMTRC
A,Em,HEC
A,Em,H,HEC
A,AAHK,Em,H,HEC
A,Em,HEC
A,Em,H,HEC
A,Ein,HEC
TS
PDS
OS
OS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PSS
PDS
PDS
-4-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BS 5306: Part 5Section 5.2
BS 5306: Part 6Section 6.1
BS 5306: Part 6Section 6.2
BS 5306: Part 7
BS 5423
BS 5445
BS 5445: Part 1
BS 5445: Part 5
BS 5445: Part 7
BS 5445: Part 8
BS 5445: Part 9
BS 5446
BS 5499: Part 1
BS 5499: Part 2
BS 5499: Part 3
BS 5588: Parti
BS 5588: Part 2
BS 5588: Part 3
BS 5588: Part 4
BS 5588: Part 5
1984(1995)
1988
1989
1988
1987(1995)
1977
1977
1984
1984
1984
1990
1990(1995)
1986(1995)
1990
1990
1985
1983
1978
1991
1984( 1995) Halon 1211 total flooding systems
Specification for low expansion foam systems
Specification for medium and high expansion foam systems
Specification for powder systems
Specification for portable fire extinguishers
Components of automatic fire detection systems
Introduction
Heat sensitive detectors - point detectors containing a staticelement
Specification for point - type smoke detectors using scatteredlight, transmitted light or ionization
Specification for high temperature heat detectors
Methods of test of sensitivity to fire
Components of automatic fire alarm systems for residentialpremises
Specification for fire safety signs
Specification for self-luminous fire safety sign
Specification for internally - illuminated fire safety signs
Fire precautions in the design, construction and use of buildings -code of practice for residential buildings
Code of practice for shops
Code of practice for office buildings
Code of practice for smoke control in protected escape routesusing pressurisation
Code of practice for fire fighting stairs and lifts
A,Em,HEC
A,Em,HEC
A,Em,HEC
A,Em,HEC
H,HEC,MTRC
MTRC,W
A,Em,W
A,Em,H,W
A5AAHK,Em,H,W
A,Em,W
A,Em,W
AsEm
A,AAHK,D,H,HEQT
A,D,Em,H,HEC,T
A,D,H,HEC,T
A,D,HEC,T
A,D,HEC,T
AAHEQT
A,D,Em,HEC»MTRQT
A,D,HEC,T
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PSS
PSS
PSS
PSS
PSS
- 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BS 5588: Part 8
BS 5588: Part 9
BS 5839
BS 5839: Part 1
BS 5839: Part 2
BS 5839: Part 3
BS 5839: Part 4
BS 5839: Part 5
BS 5908
BS 6535
BS 6853
BS 7273: Part 1
BS 7273: Part 2
BS 7327: Part 1
BS750
1988
1989
1988
1983
1988
1988
1988
1990
1987
1990
1992
1990(1995)
1984
BS 7863 1996
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
BS EN 25923
BS EN 27201-1
BS EN 27201-2
BSEN3
BS EN 54-1
1994
1994
1994
1996
Code of practice for means of escape for disabled people
Code of practice for ventilation and air conditioning ductwork
Fire detection and alarm systems for buildings
Code of practice for system design, installation and servicing
Specification for manual call points
Specification for automatic release mechanisms for certain fireprotection equipment
Specification for control and indicating equipment
Specification for optical beam smoke detectors
Code of practice for fire precautions in the chemical and alliedindustries
Fire extinguishing media
Code of practice for fire precautions in the design andconstruction of railway passenger rolling stock
Electrical actuation of gaseous total flooding extinguishingsystems
Mechanical actuation of gaseous total flooding an localapplication extinguishing system
Specification for small fixed halon fire extinguishers
Specification for underground fire hydrants and surface boxframes and covers
Recommendations for colour coding to indicate theextinguishing media contained in portable fire extinguishers
Carbon dioxide
Specification for halon 1211 and halon 1301
Code of practice for safe handling and transfer procedures
Portable fire extinguishers
Fire detection and fire alarm systems - Introduction
A,D,HEC,T PSS
A,D,Ep,Em,HEC,T PSS
A,Em,HEC,MTRC,W
A,Em,HEC,W
A,Em,HEC,W
A,Em,HEC
A,Em,H,HEC
A,Ern,HEC
A,Em
A,Em
AAHK
A,Em
A,Em
PDS
PSS
PDS
PDS
PDS
PDS
PSS
PDS
PSS
PDS
PDS
A,Em PDS
A,AAHK,C,D,Em,H PDS,HEC,Hy,T,W
A, Em
A,Em
A,Em,MTRC
A, Em
A,Em
A, Em
OS
PDS
PDS
PSS
PDS
PDS
-6-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BUILDING SERVICES Fire Services
BSEN615 1995 Fire protection. Fire extinguishing media. Specifications for A,Em
powders (other than class D powders)
BS EN 671 -1 1995 Hose reels with semi-rigid hose
CAP 59 Factories and Industrial Undertakings (Fire Precautions in
Noticeable Workplaces) Regulations
CAP 95 Fire Service (Installation and Equipment) Regulators
CAP 95 Fire Service (Installation Contractors) Regulators
CAP 95 Fire Service Department (Reports and Certifications) Regulators
CAP 95 Fire Services Ordinance
FOC Rules for automatic sprinkler installations
FOC 1985 Rules for automatic fire alarm installations for the protection ofproperty
FSD 1994 Code of practice for minimum fire services installation andequipment
FSD 1996 Code of Practice for the Provision of Means of Escape in case ofFire
FSD 1994 Code of Practice for Minimum Fire Service Installations andEquipment and Inspection and Testing of Installation andEquipment
FSD List of portable fire fighting equipment
IP 1993 Model code of safe practice for the petroleum industry: Part 19 -Fire precautions at petroleum refineries and bulk storageinstallations
LPC Rules for automatic sprinkler installations, United Kingdom
NFPA National fire codes
NFPA 1991 National fire protection association (NFPA) Code 12A & 12B
requirement
NFPA 15 Water spray fixed systems for fire protection
NFPA 2001 Clean agent fire extinguishing systems
NFPA 30 Flammable and combustible liquids code
PDS
A,Em
A,Em
A,Em,H,HEC,MTRC
A,B,Em
HEC
AAHK,HEC
HEC
HEC
A,Em
A,Em,HEC5MTRC
HEQMTRC
HEC
HEC
HEC
PDS
TR
TR
TR
TR
TR
PSS
PSS
PSS
PSS
PSS
OS
PSS
PSS
OS
OS
PDS
PDS
OS
- 7 .
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Heating & Ventilation ASHRAE 33
BUILDING SERVICES Heating & Ventilation ASHRAE 37
BUILDING SERVICES Heating & Ventilation ASHRAE 52
BUILDING SERVICES Heating & Ventilation BS 2871: Part 3
BUILDING SERVICES Heating & Ventilation BS 3790
BUILDING SERVICES Heating & Ventilation BS 3928
BUILDING SERVICES Heating & Ventilation BS 4856: Part 4
BUILDING SERVICES Heating & Ventilation BS 4856: Part 5
BUILDING SERVICES Heating & Ventilation BS 4857: Part 1
BUILDING SERVICES Heating & Ventilation BS 4857: Part 2
BUILDING SERVICES Heating & Ventilation BS 4954: Part 1
BUILDING SERVICES Heating & Ventilation BS 4954: Part 2
BUILDING SERVICES Heating & Ventilation BS 4979
BUILDING SERVICES Heating & Ventilation BS 6540
BUILDING SERVICES
BUILDING SERVICES
Heating & Ventilation BS 848
Heating & Ventilation BS 848: Part 1
1978 Method of testing forced circulation air cooling and air heatingcoils
1988 Method of testing for rating unitary air-conditioning and heatpump equipment
1976 Method of testing air cleaning devices used in general ventilationfor removing particulate matter
1972 Specification for copper and copper alloys. Tubes : Tubes forheat exchangers
1995 Specification for endless wedge belt drives and endless V-beltdrives
1969 Method for sodium flame test for air filters (other than for airsupply to I.C. engines and compressors)
1997 Determination of sound power levels of fan coil reverberatingrooms
1979 Methods for testing and rating fan coil units, unit heaters and unitcoolers - acoustic performance; with ducting
1972( 1983) Methods for testing and rating terminal reheat units for airdistribution systems - thermal and aerodynamic performance
1978(1983) Methods for testing and rating terminal reheat units for airdistribution systems - acoustic testing and rating
1973(1987) Methods for testing and rating induction units for air distributionsystems - thermal and aerodynamic performance
1978( 1987) Methods for testing and rating induction units for air distributionsystems - acoustic testing and rating
1986 Methods for aerodynamic testing of constant and variable dualduct or single duct boxes, single duct units and induction boxesfor air distribution systems
1985 Air filters used in air-conditioning and general ventilation
Fans for general purposes
1997 Methods of testing performances
AAHK
AAHK
A,D,Em,H,HEC,MTRC
H,HEC,W
A,D,Em,H
A,D,Em,H,MTRC
A, Em
A,D,Em,H,MTRC
A,D,Ern,H
A,D,Em,H
A,D,Em,Ep,H
A,D,Em,Ep,H
A,D,Em,IiHEC
A,Ep,H,HEC\MTRC
AAHK
A,Em,H,HEC,MTRC
TS
TS
TS
PDS
PDS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
TS
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Heating & Ventilation BS 848: Part 2 1985
BUILDING SERVICES Heating & Ventilation BS 848: Part 5
BUILDING SERVICES Heating & Ventilation BS 848: Part 6
BUILDING SERVICES Heating & Ventilation BS 853: Part 1
BUILDING SERVICES Heating & Ventilation BS 853: Part 2
BUILDING SERVICES Heating & Ventilation BS EN 779
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Heating & Ventilation CAP 123
Heating & Ventilation CAP 132
Heating & Ventilation CAP 132
Heating & Ventilation CIBSE
Heating & Ventilation CW/151
Heating & Ventilation UL 900
Lifting Appliances BS 1757
Lifting Appliances BS 2573
Lifting Appliances BS 2573: Part 1
BUILDING SERVICES Lifting Appliances BS 3243
BUILDING SERVICES Lifting Appliances BS 4465
1986
1989
1996
1996
1993
1986
1984
1982
1986
1983
BUILDING SERVICES Lifting Appliances BS 2573: Part 2 1980
BUILDING SERVICES Lifting Appliances BS466
1990
1989
1984
Methods of noise testing
Guide for mechanical and electrical safety
Method of measurement of fan vibration
Calorifiers and storage vessels for central heating and hot watersupply
Tubular heat exchangers and storage vessels for building andindustrial services
Paniculate air filters used for general ventilation. Requirements,testing, marking conditioning and general ventilation
Building (ventilation systems) regulations
Ventilation of Scheduled Premises (Regional Council) By-laws
Ventilation of Scheduled Premises (Urban Council) By-laws
CIBSE guide volume A1-A10, B1-B18, C1-C7
Specification for plastic ductwork
Standard for test performance of air filter units
Specification for power-driven mobile cranes
Rules for the design of cranes
Rules for the design of cranes - Specification for classification,stress calculations and design criteria for structures
Rules for the design of cranes - Specification for classification,stress calculations and design of mechanisms
Specification for hand-operated chained blocks
Specification for design and construction of electric hoists forboth passengers and materials
Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use
A,D,Em,Ep,H,HEC,
MTRCA,D,Em,H,HEC5
MTRC
A,D,Em,HEC,MTRC
HEC
HEC
A,D,Em,H,MTRC
A,D,Em
HEC
A,D,Em,MTRC
Em
A,D,Em,HEC,W
A3,D,Em,T,HEC,W
A,D,Em,HEC,W
A,D,Em,HEC,W
A,D,Em,HEC
AAEm,HEC,W
TS
PSS
TS
PDS
PDS
PDS
TR
TR
TR
OS
PDS
TS
PDS
PSS
PSS
PSS
PDS
PSS
PDS
- 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
Lifting Appliances
BS 4942
BS 5639
BS 5639: Part 1
BS 5639: Part 3
BS 5639: Part 5
BS 6166: Part 3
BS 6440
BS7121
BS 7121: Parti
BS 7212
BS 7262
BS 7333
BS ISO 2328
BS ISO 2330
CAP 470
CAP 470
CAP 59
CAP 59
LabourDepartment
1981
1978
1978
1978
1988
1983
1989
1989
1990
1990
1993
1995
1988
A,D,Em
Short link chain for lifting purposes
Fork arms for fork lift trucks
Vocabulary for hook-on type fork arm
Recommendations for dimensions of fork arms
Guide for inspection and repair of fork arms in service
Guide to selection and safe use of lifting slings for multi-purposes
Code of practice for powered lifting platforms for use by disabledpersons
Code of practice for safe use of cranes
Code of practice for safe use of cranes - general
Code of practice for safe use of construction hoists
Specification for automatic safe load indicators
Specification for slewing jib cranes
Specification for mounting dimensions of hook-on type forkarms and fork arm carriages.
Fork-lift Trucks. Fork arms. Technical characteristics andtesting
Builders' Lifts and Tower Working Platforms (Safety) Ordinance
Builders' Lifts and Tower Working Platforms (Safety) (Fees)Regulation
Factories and Industrial Undertakings (Lifting Appliances andLifting gear) Regulations
Factories and Industrial Undertakings (Suspended WorkingPlatforms) Regulations
Code of practice for safe use of mobile cranes & tower cranes HEC
AAHK,HEC,Hy,MTRC
Em
Em
Em
Em
Em
PDS
PDS
OS
PDS
PSS
PSS
Em
PSS
A,D,Em
Em
A,D,Em
A,D,Em,W
Em
Em
PSS
PSS
PSS
PDS
PDS
PDS
TS
TR
TR
TR
TR
PSS
-10-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lifting Appliances
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDrNG SERVICES Lifts & Escalators
OSHA Instruction 1985STD 1-3.3
ANSIA17.1
ASD
BA
BA
BA
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
1993
1996
1993
1993
1993
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lifts 8c Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts 8c Escalators
BS
BS
BS
BS
BS
BS
BS
BS
BS
BS
302: Part 4
3027
5323
5655
5655: Part
5655: Part
5655: Part
5655: Part
5655: Part
5655: Part
1
2
3
5
6
7
1987
1968
1980
1986
1988
1989
1989
1990
1983
BS 5655: Part 8 1983
BS 5655: Part 9 1985
BS 5655: Part 10 1995
Building anchors used for intermittent stabilisation of asuspended powered platform in window washing operations andlight building maintenance
Safety code for elevators and escalators
General specification for lift and escalator installation inGovernment building
Code of practice on the design and construction of buildings and A,Embuilding works for the installation and safe use of lifts andescalators, Buildings Authority
Code of practice building works for lifts and escalators
Code of practice on the design and construction of buildings andbuilding works for the installation and safe use of lifts andescalators
Specification for ropes for lifts
Specification for Dimensions of Worm Gear Units
Code of practice for scissor lifts
Lifts and service lifts
Safety rules for the construction and installation of electric lifts
Safety rules for the construction and installation of hydraulic lifts
Specification for electric service lifts
Specification for dimensions of standard lift arrangements
Code of practice for selection and installation
Specification for manual control devices, indicators andadditional fittings
Specification for eyebolts for lift suspension
Specification for guide rails
Specification for the testing and inspection of electric andhydraulic lifts
A,D,HEC,T
A,Em,MTRC
A,Em
PDS
OS
PDS
PSS
A,B,Em,H,HEC,MTRC
MTRC
A,AAHK,Ern,HEC
HEC
A,AAHK5D,Em
A,AAHK,Em,H5
MTRC
A,Em,H
A,Em,HEC
A^H
A,D,Em,HsHEC,T
A,Em>H
A,Em,H,HEC
A,Em,H,HEC
A,Em,H,HEC
A,Em,H,HEC
PSS
PSS
PDS
PDS
PSS
PDS
PSS
PSS
PDS
PDS
PSS
PDS
PDS
PDS
TS
-11 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BUILDING SERVICES Lifts & Escalators
BS 5655: Part10.1.1
BS 5655: Part10.2.1
BS 5655: Part 11 1989
BS 5655: Part 12 1989
BS 5655:
BS 5655:
BS 5656
BS 5776
BS 5900
BS 6440
Part
Part
13
14
1995
1995
1983
1996
1980
1983
BS 6977
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
Lifts & Escalators
BS 7255
BSEN115
CAP 327
CAP 327
CAP 59
CIBSE
EMSD
1989
1995
1993
1996
BUILDING SERVICES Lifts & Escalators EMSD
1995 Electric Lifts Commissioning Test for New Lifts
1995 Hydraulic Lifts : Commissioning Test for New Lifts
Recommendations for the installation of new, and themodernisation of, electric lifts in existing buildings
Recommendations for the installation of new, and themodernisation of, hydraulic lifts in existing buildings
Recommendation for vandal resistant lifts
Specification for hand-powered service lifts and platform hoists
Safety rules for the construction and installation of escalators andpassenger conveyors
Specification for powered stairlifts
Specification for powered homelifts
Code of practice for powered lifting platforms for use by disabledpersons
1991 Specification for insulated flexible cables for lifts and otherflexible connections
Code of practice for safe working on lifts
Safety rules for the construction and installation of escalators andpassenger conveyors
Lifts and Escalators (Safety) Ordinance
Lifts and Escalators (Safety) (Fees) Regulations
Factories and Industrial Undertakings (Goods Lifts) Regulations
Transfertation systems in buildings
Code of practice on design and construction of builders' lifts
1996 Code of practice on the examination, testing and maintenance oflifts and escalators
HEC
HEC
A,Em,H,HEC
A,Em,H,HEC
A,EmsHEC
A,Em
A,Em,H,MTRC
A,Em
A,Em
A,Em
A,AAHKXm,H,HEC
A, Em
A,AAHK,Em,MTRC
II
A,D,Em,H,HEC,MTRC
A,Em,iiHEC,MTRC
TS
TS
PSS
PSS
PDS
PDS
PSS
PDS
PDS
PSS
PDS
PSS
PSS
TR
TR
TR
PDS
PSS
TS
- 1 2 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lifts & Escalators EN 81: Part 1
BUILDING SERVICES Lifts & Escalators EN 81: Part 2
BUILDING SERVICES Lifts & Escalators LabourDepartment
BUILDING SERVICES Lighting & Power ASD
1998
1998
1998
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power BS 1853
Lighting & Power BS 1853: Part 2 1995
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
BS 3677
BS 3939
BS 4533:
BS4533:
BS4533:102.1
BS4533:102.10
BS4533:102.17
BS4533:102.2
BS4533:102.4
BS4533:102.5
Part 101
Part 2
Section
Section
Section
Section
Section
Section
1989
1990
1979
1990
1990
1990
1990
1990
1990
Safety rules for the construction and installation of lifts andservice lifts (effective from 1 July 1999)
Safety rules for the construction and installation of hydraulic lifts(effective from 1 July 1999)
Code of practice for safety at work (Lift & Escalators)
General specification for electrical installation in Governmentbuilding of the HKSAR
Tubular fluorescent lamps for general lighting service
Tubular Fluorescent Lamps for General Lighting Service :Specification for Lamps Used in the United Kingdom NotIncluded in BS EN 60081, BS EN 60901, BS EN 61195 and BSEN 61199
Specification for High-Pressure Mercury Vapour Lamps
Graphical symbols for electrical power, telecommunications andelectronics diagrams
Luminaries - specification for general requirements and tests
Luminaries - detail requirements
Specification for fixed general purpose luminaries
Specification for portable child-appealing luminaries
Specification for luminaries for stage lighting, television, filmand photographic studios (outside and indoor)
Specification for recessed luminaries
Specification for portable general purpose luminaries
Specification for floodlights
A,Em,MTRC
A,Em,MTRC
A,H
A,Em,H,T
AAHK
HEC
PSS
PSS
PSS
PDS
PDS
PDS
HEC
AAHK
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
PDS
OS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 1 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
BS4533: Section102.6
BS 4533: Section102.7
BS 4533: Section102.8
BS4533: Section102.9
BS 4533: Section103.2
BS5518
BS559
BS 5649
BS 6972
BS 7001
BS7216
BS EN 60081
BS EN 60238
BS EN 60400
BS EN 60570-2-1
BS EN 60598
BS EN 60598-1
BS EN 60598-2-2
1990
1990
1990
1990
1986
1977
1991
1988
1988
1989(1994)
1994
1996
1996
1995
1993
1997
Specification for luminaries with built-in transformers forfilament lamps
Specification for portable luminaries for garden use
Specification for handlamps
Specification for photo and film luminaries (non-professional)
Specification for photometric characteristics of luminaries forhospitals and health care buildings
Specification for electronic variable control switches (dimmerswitches) for tungsten filament lighting
Specification for electric signs and high-voltage luminous-discharge-tube installation
Lighting columns
Specification for general requirements for luminaire supportingcouplers for domestic, light industrial and commercial use
Specification for interchangeability and safety of a standardisedluminaire supporting coupler
Classification and interpretation of new lighting products
Specification for Tubular Fluorescent Lamps for GeneralLighting Service
Specification for Edison screw lampholders
Specification for lampholders for tubular fluorescent lamps andstarterholders
Electrical Supply Track Systems for Luminaries: Mixed SupplySystems : Classes I and II
Luminaires
Specification for general requirements and tests
Specification for recessed luminaires
HEC
HEC
HEC
HEC
HEC
A,D,Em
A,AAHK,D,Em
A,HEC,Hy,T,W
A,D,Em,MTRC
A,AAHK,D,Em
AAHK
AAHK,HEC
AAHK,Em
AAHK
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
OS
PDS
PDS
PDS
HEC PDS
A,HEC,Hy,T
A,HEC,Hy,T,W
AJiHy
PDS
PDS
PDS
-14-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lighting & Power BS EN 60598-2-6 1995
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power BS EN 60662 1993
Lighting & Power BS EN 60920 1991
BUILDING SERVICES Lighting & Power BS EN 60921 1991
BUILDING SERVICES Lighting & Power BS EN 60922 1991
BUILDING SERVICES Lighting & Power BS EN 60923 1996
BUILDING SERVICES Lighting & Power BS EN 60927 1997
BUILDING SERVICES Lighting & Power BS EN 61048 1993
BUILDING SERVICES Lighting & Power BS EN 61049
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
BS EN 61184
BSG217
CAP 105
CAP 357
CAP 357
BUILDING SERVICES Lighting & Power CAP 357
1993
BUILDING SERVICES Lighting & Power BS EN 61050 1992
1995
1975
Specification for luminaires with built-in transformers forfilament lamps
Specification for High-Pressure Sodium Vapour Lamps
Specification for Ballasts for Tubular Fluorescent Lamps.General and Safety Requirements
Specification for Ballasts for Tubular Fluorescent Lamps.Performance Requirements
Specification for General and Safety Requirements for Ballastsfor Discharge Lamps (Excluding Tubular Fluorescent Lamps)
Auxiliaries for Lamps. Ballasts for Discharge Lamps (ExcludingTubular Fluorescent Lamps). Performance Requirements
Specification for auxiliaries for lamps. Starting devices (otherthan glow starters). Performance requirements.
Specification for Capacitors for Use in Tubular Fluorescent andOther Discharge Lamp Circuits. General and SafetyRequirements
Specification for Capacitors for Use in Tubular Fluorescent andOther Discharge Lamp Circuits. Performance Requirements
Specification for Transformers for Tubular Discharge LampsHaving A No-Load Output Voltage Exceeding lOOOv (GenerallyCalled Neon Transformer). General and Safety Requirements
Bayonet Lampholders
Specification for general requirements for cockpit lightingcontrollers
Public lighting Ordinance
Electricity Networks (Statutory Easements) Ordinance
Electricity Networks (Statutory Easements) (Rectification ofApproved Scheme) (Consolidation) Order
Electricity Networks (Statutory Easements) (Application ofOrdinance) (Consolidation) Order
A,H,Hy PDS
HEC
AAHK,HEC
AAHK,HEC
AAHK,HEC
AAHK,HEC
AAHK
AAHK,HEC
AAHKSHEC
HEC
Em,HEC
AAHK
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TR
TR
TR
TR
- 1 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lighting & Power CAP 357
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
CAP 406
CAP 406
CAP 406
CAP 406
CAP 406
CAP 406
CAP 59
CIBSE
CLP
CLP CP 101
EMSD
HEC
HEC
HEC
HEC
IEC 60364
IEC 60364-1
IEC 60364-2-21
IEC 60364-3
IEC 60364-4-41
1994
1998
1997
1998
1997
1997
1992
1993
1993
1992
BUILDING SERVICES Lighting & Power
BUILDING SERVICES Lighting & Power
IEC 60364-4-442 1993
IEC 60364-4-443 1995
Electricity Networks (Statutory Easements) (Rectification ofApproved Scheme) Order
TR
Electricity Supply Regulations Sections
Electricity Ordinance
Electricity Supply (Special Area) Regulations
Electricity Supply (Exemption) Regulations
Electricity (Registration) Regulations
Electricity (Wiring) Regulations
Factories and Industrial Undertakings (Electricity) Regulations
Code for interior lighting
Supply rules
Distribution substation design
Code of practice for energy efficiency of lighting installation
Supply Rules
Safety Rules (Electrical)
Guide to Connection of Supply
Inspection Guide Book
Electrical Installations of Building
Scope, Object and Fundamental Principles
Definitions : Guide to General Terms
Assessment of General Characteristics
Protection for Safety - Chapter 41: Protection Against ElectricShock
Protection of Low-Voltage Installations Against Faults BetweenHigh-Voltage Systems and Earth
Protection Against Overvoltaees of Atmospheric Origin Or Due
H
MTRC
A,Em,H,MTRC,W
H
HEC
HEC
HEC
HEC
HEC
HEC
HEC
TR
TR
TR
TR
TR
TR
TR
OS
OS
PSS
PSS
OS
OS
OS
OS
PSS
PSS
PSS
PSS
PSS
PSS
PSSto Switching
- 1 6 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES Lighting & Power IEC 60364-4-444 1996
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
BUILDING SERVICES Lighting & Power
BUILDING SERVICES Lighting & Power
BUILDING SERVICES Lighting & Power
BUILDING SERVICES Lighting & Power
IEC 60364-4-45 1984
IEC 60364-4-46 1981
IEC 60364-4-481 1993
IEC 60364-4-482 1982
IEC 60364-4-707 1984
IEC 60364-5-51 1997
IEC 60364-5-52 1993
IEC 60364-5-53 1994
IEC 60364-5-548 1996
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Lighting & Power
Security System
Security System
Security System
Security System
IEC 60364-5-551
IEC 60364-6-61
IEC 60364-7-701
IEC 60364-7-703
IEC 60364-7-704
IEC 60364-7-706
IEC 60364-7-714
BS3621
BS 4737
BS 4737: Part 1(IEC 60839-1-1)
BS 4737: Part 3(IEC 60839-1-1)
1994
1986
1984
1984
1989
1983
1996
1980
1986
Protection Against Electromagnetic Interferences (EMI) in HEC
Installations of Buildings
Protection Against Undervoltage
Isolation and Switching
Choice of Protective Measures As A Function of External
Protection Against Fire
Earthing Requirements for the Installation of Data ProcessingEquipment
Common Rules
Wiring Systems
Switchgear and Controlgear
Earthing Arrangements and Equipotential Bonding forInformation Technology Installations
Low-Voltage Generating Sets
Initial Verification
Electrical Installations in Bathrooms
Locations Containing Sauna Heaters
Construction and Demolition Site Installations
Restrictive Conductive Locations
External Lighting Installations
Specification for thief resistant locks
Intruder alarm system
Specification for installed systems with local audible and/orremote signalling
Specification for components A,Em
PSS
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
A,AAHK,D,H,HEC,T
A,Em,MTRC
A,Em
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PDS
PDS
PDS
PDS
-17-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BUILDING SERVICES Security System
BS 4737: Part 3 1988Section 3.0 (IEC60839-1-1)
BS 4737: Part 3 1977Section 3.1 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.10 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.11 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.12 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.13 (IEC60839-1-1)
BS 4737: Part 3 1977Section 3.2 (IEC60839-1-1)
BS 4737: Part 3 1977Section 3.3 (IEC60839-1-1)
BS 4737: Part 3 1986Section 3.30 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.4 (IEC60839-1-1)
BS 4737: Part 3 1978Section 3.5 (IEC60839-1-1)
General requirements A, Em
Continuous wiring A,Em
Vibration detectors A,Em
Rigid printed-circuit wiring A,Em
Beam interruption detectors A,Em
Capacitive proximity detectors A,Em
Foil on glass A,E*n
Protective switches A,Em
Specification for PVC insulated cables for interconnecting A,Emwiring
Radiowave Doppler detectors A,Em
Ultrasonic movement detectors A,Em
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-18-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
Security System
Security System
Security System
Security System
Security System
Security System
Security System
Sound System
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
BS 4737: Part 3Section 3.6 (IEC60839-1-1)
BS 4737: Part 3Section 3.7 (IEC60839-1-1)
BS 4737: Part 3Section 3.8 (IEC60839-1-1)
BS 4737: Part 3Section 3.9 (IEC60839-1-1)
BS 7042
BS 7230
BS 8220
BS 6259
ANSI
BS 3939
BS 3939: Part 1(IEC 60617-1)
BS 4505: Part 1
BS 6266
BS6701
BS EN 28601
BS EN 60617-10
1978
1978
1978
1978
1988
1989
1997
1986(1992)
1981
1992
1994
1992
1996
Acoustic detectors
Passive infra-red detectors
Volumetric capacitive detectors
Pressure mats
Specification for high security intruder alarm systems inbuildings
Code of practice for article theft detection systems
Guide for security of buildings against crime
Code of practice for planning and installation of sound systems
Commercial building telecommunication cabling standard
Graphical symbols for electrical power, telecommunications andelectronics diagrams
General information, general index
Digital data transmission - Specification for basic mode controlprocedures
Code of Practice for Fire Protection for Electronic DataProcessing Installations
Code of practice for installation of apparatus intended forconnection to certain telecommunication systems
Specification for representation of dates and times in informationinterchange
Graphical symbols for diagram - Telecommunications:
A, Em
A,Em
A,Em
A,Em
AAHK
A,Em
AAHK
A,Em,MTRC
AAHK
A,AAHK,D,Em,W
A,AAHK,D,Em,W
AAHK
HEC
AAHK,Em
AAHK
A,D,Em,W
PDS
PDS
PDS
PDS
PDS
PSS
PSS
PSS
PDS
OS
OS
PSS
PSS
PSS
OS
OStransmission
- 19-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDING SERVICES
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Telecommunication
Access for Disabled
Access for Disabled
Access for Disabled
Access for Disabled
Access for Disabled
Access for Disabled
Access for Disabled
Access for Disabled
Chimney & Fireplace
Chimnev & Fireolace
BS EN 60617-11
BS EN 60617-2
BS EN 60617-3
BS EN 60617-4
BS EN 60617-5
BS EN 60617-6
BS EN 60617-7
BS EN 60617-8
BS EN 60617-9
CAP 106
CAP 106
HKT
BA
BA
BS 5588: Part 8
BS5619
BS5810
BS 6440
CAP 123
PD 6523
ASCE
BD PN 45
1997
1996
1996
1996
1996
1996
1996
1996
1996
1983
1984
1997
1988
1978
1979
1983
1989
1994
Architectural and topographical installation plans and diagrams
Symbol elements, qualifying symbols and other symbols havinggeneral application
Conductors and connecting devices
Passive components
Semiconductors and electron tubes
Production and conversion of electrical energy
Switchgear, controlgear and protective devices
Measuring instruments, lamps and signalling devices
Telecommunications: switching and peripheral equipment
Telecommunication Ordinance
Telecommunication Regulations
Code of Practice - Protection of Communication Networks fromElectrical Power Distribution
Design manual: Access for the Disabled
Design manual: Barrier Free Access
Fire precautions in the design, construction and use of buildings -code of practice for means of escape for disabled people
Code of practice for design of housing for the convenience ofdisabled people
Code of practice for access for the disabled to buildings
Code of practice for powered lifting platforms for use by disabledpersons
Building (Planning) Regulations, Regulation 72
Information on access to and movement within and aroundbuilding for disabled people
Design and Construction of Steel Chimney Liners
Chimney and flues
A,D,Em,W
A,D,Ern,W
A,D,Em,W
A,D,Em,W
A, Em
A, Em
A, Em
A, Em
A, Em
HEC
A,B,HEC,T
A,B,H,T
A,D,HECT
OS
OS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
TR
TR
PSS
PSS
PSS
PSS
A,HEC,T PSS
A,HEC
A,HEC,T
A,HEC,T
HEC
A,B,HEC
PSS
PSS
TR
OS
PSS
PDS
-20-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney <fe Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Chimney & Fireplace
Cladding/Tiles
Cladding/Tiles
Cladding/Tiles
Cladding/Tiles
Cladding/Tiles
Curtail Walls/Glazing
Curtain Wall
BS1251
BS 3572
BS 3678
BS 4076
BS4211
BS 4543: Part 2
BS 4543: Part 3
BS 6461: Parti
BS 7566: Part 1
BS 7566: Part 3
CAP 123
BS 3987
BS 8000: Part 6
BS 8200
BS 8298
CAP 123
BS 8000: Part 7
CAP 123
1987
1986(1992)
1986(1992)
1989
1994
1990
1990
1984
1992
1992
1974(1991)
1990
1985
1990
Specification for open-fireplace components.
Specification for access fittings for chimneys and other highstructures in concrete or brick work
Specification for access hooks for chimneys and other highstructures in steel.
Specification for steel chimneys
Specification for ladders for permanent access to chimneys otherhigh structures, silos and bins
Specification for chimneys with stainless steel flue linings for usewith solid fuel fixed appliances
Specification for chimneys with stainless steel fluelining for usewith oil fired appliances
Code of practice for masonry chimneys and flue pipes
Installation of factory-made chimneys to BS 4543 for domesticappliances - method of specifying installation design information
Installation of factory-made chimneys to BS 4543 for domesticappliances - specification for site installation
Building (Construction) Regulations Part X
Specification for anodic oxide coatings on wrought aluminiumfor external architectural applications
Workmanship on building sites: code of practice for slating andtiling of roofs and claddings
Code of practice for design of non-loadbearing external verticalenclosures of buildings
Code of Practice for Design and Installation of Natural Stonecladding and Lining
Building (Construction) Regulations, Regulation 39
Workmanship on building sites: code of practice for glazing
Building (Construction)Regulations, Regulation 43
A,HEC
A,HEC
A,HEC
PDS
PDS
PDS
A,B,Ep,HEC
A,AAHK,HEC,Hy,MTRCJ
A,B,HEC
A,B,Ep,HEC
A,Ep,HEC
A,Ep,HEC
PDS
PDS
PDS
PDS
PSS
PSS
A,Ep,HEC PSS
A,C,D,H,HEC,T
A,D,HEC,T
A,AAHK,D,HEC,T
MTRC
AAHEQT
TR
PDS
PSS
PSS
PSS
TR
PSS
TR
-21 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDTNGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Curtain Wall/Glazing AAMA 501.1 1983
Curtain Wall/Glazing AAMA 501.2 1983
Curtain Wall/Glazing ANSI Z97.1 1984
Curtain Wall/Glazing ASTM C 1048 1990
Curtain Walls/Glazing ASTM C 1036
Curtain Walls/Glazing BD PN 106 1995
Curtain Walls/Glazing BD PN 106 1995
Curtain Walls/Glazing BS 5713 1979(1994)
Curtain Walls/Glazing BS 6206 1981(1994)
Curtain Walls/Glazing BS 6262 1982
Curtain Walls/Glazing BS 7352 1990
Curtain Walls/Glazing BS 952
Curtain Walls/Glazing
Curtain Walls/Glazing
Curtain Walls/Glazing
Doors & Windows
Doors & Windows
Doors & Windows
BS 952: Part 1
BS 952: Part 2
CAP 123
ASTM E 283
ASTM E 330
ASTM E 331
1978
1980
1984
1990
1986
Standard test method for metal curtain walls for waterpenetration using dynamic pressure
Field check of metal curtain walls for water leakage
Performance specifications and methods of test for safety glazingmaterial used in buildings
Specification for Heat Treated Flat Glass-kind HS, Kind FTCoated and Uncoated Glass
Flat Glass
Curtain wall systems
Curtain wall systems
Specification for Hermetically Sealed Flat Double Glazing Units
Specification for impact performance requirements for flat safetyglass and safety plastics for use in buildings
Code of practice for glazing for buildings
Specification for strength and durability performance of metalhinges for side hanging applications and dimensionalrequirements for template drilled hinges
Glass for glazing
Classification
Terminology for work on glass
Building (Construction) Regulations, Regulation 39
Standard test method for rate of air leakage through exteriorwindows, curtain walls and doors
Standard test method for structural performance of exteriorwindows, curtain walls, and doors by uniform static air pressuredifference
Standard test method for water penetration of exterior windows,curtain walls, and doors by uniform static air pressure difference
A,D,H,HEC,T
A,D,H,HEC,T
A,AAHK,D,T,
HEC
A,D,HEC,T
MTRC
A,B,D,H,T
HEC
A,D,HEC,T
AAHK,HEC,Hy,MTRC
AAAHK,B,DJi,HEC,Hy,MTRC,T
A,D,H,HEC,T
A,D,H,HEC,HyXW
A,D,H,HEC,Hy,MTRCT
A3,D,H,HEC/T
AJXHECT;
AAHECJ;
AAHECX
TS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
OS
OS
TR
TS
TS
TS
-22-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors <& Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Doors & Windows
Means of Escape
BS 1245
BS4315
BS459
BS 4873
BS4951
BS 5368
BS 5368: Part I
BS 5368: Part 2
BS 5368: Part 3
BS 5368: Part 4
BS 5872
BS 5977: Part 2
BS 6375
BS 6375: Part 1
BS 6375: Part 2
BS6510
BS 8213: Parti
BS 8213: Part 4
CP 153: Part 3
BA
1975 (1986) Specification for metal door frames (steel)
1983 Methods of test for resistance to air and water penetration
1988 (1995) Specification for matchboarded wooden door leaves for externaluse
1986 Specification for aluminium alloy windows
1973(1995) Specification for builders' hardware: lock and latch furniture(doors)
Methods of testing windows
1976( 1994) Air permeability test
1980( 1994) Water tightness test under static pressure
1978( 1994) Methods of testing windows - wind resistance tests
1978( 1994) Methods of testing windows - form of test report
1980(1995) Specification for locks and latches for doors in buildings
Specification for Prefabricated Lintels
Performance of windows
1989 Classification for weathertightness (including guidance onselection and specification)
1987(1995) Specification for operation and strength characteristics
1984 Specification for steel sills, windows, window boards and doors
1991 Code of practice for safety in use and during cleaning ofwindows and doors (including guidance on cleaning materialsand methods)
1990 Code of practice for the installation of replacement windows anddoorsteps in dwellings
1972 Windows and rooflights - sound insulation
1995 Code of practice for means of access for fire fighting and rescue
AAHK
HEC
AAHK
A,AAHK,D,HEC,Hy,T
A,AAHK,D,H5
HEQT
AAHK
AAHK,D,H,HEC,T
D,H,HEC,T
A,AAHK,B,D,H,HEC,T
A,D,HEC,T
A,AAHK,D,H,HEC,T
MTRC
AAHK
AAHK
A,D,HEC,T
A,AAHK,D,HEC,Hy,T
AAEp,HEC,T
PDS
TS
PDS
PDS
PDS
TS
TS
TS
TS
TS
PDS
PDS
PDS
OS
PDS
PDS
PSS
A,D,HEC PSS
A,D,Ep,HEC,T PSS
A,B,Em,H,HEC,T PSS
-23-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Means of Escape
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BA
BS 5266
BS 5266: Part 1
BS 5266: Part 3
BS 5395
BS 5725: Part 1
BS EN 1125
CAP 123
CAP 172
BS 5606
BS 6093
BS6180
BS 6954: Part 1
BS 6954: Part 2
BS 6954: Part 3
BS 7543
1996
1988
1981
1985
1981
1997
1990
1995
1988(1994)
1988(1994)
1988(1994)
1992
Code of practice for the provision of means of escape in case offire
Emergency lighting
Code of practice for the emergency lighting of premises otherthan cinemas certain other specified premises used forentertainment
Specification for small power relays (electromagnetic) foremergency lighting applications up to and including 32A
Stairs, Ladders and walkways
Emergency exit devices - specification for panic bolts and paniclatches mechanically operated by a horizontal push-bar
Building hardware. Panic exit devices operated by a horizontalbar. Requirements and test methods
Building (Planning) Regulations Part V
Places of Public Entertainment Ordinance
Guide to accuracy in building
Code of Practice for Design of Joints and Jointing in BuildingConstruction
Code of practice for barriers in and about buildings
Tolerances for building - recommendations for basic principlesfor evaluation and specification
Tolerances for building - recommendations for statistical basisfor predicting fit between components having a normaldistribution
Tolerances for building - recommendations for selecting targetsizes and predicting fit
Guide to durability of buildings and building elements, productsand components
A,B,H,HEC,T
A,AAHK,D,Ern,H,MTRC
A,AAHK,DsEm,H,MTRC
A,D,Em,H
HEQHy
A,AAHK,D,H,HEC,MTRC,T
A,Em
A,D,H,HEC,T
A,D,H,HEC,MTRC/F
AAHK,MTRC
A,D,HEC,T
A,D,HECT
A,D,HEC,T
AJXHBCT
PSS
PDS
PSS
PDS
PSS
PDS
PDS
TR
TR
OS
PSS
PSS
0 $
OS
0 $
PDS
-24-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
A,D,HEC,T
A,D,HEC,Hy,MTRC,T,W
TYPE
PSS
TR
PSS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Miscellaneous
Miscellaneous
Partition, Ceiling Wall& Floor
Partition, Ceiling Wall& Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wail & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
BS 8103: Parti 1986
CAP 123
BS 5385: Part 3
BS 5385: Part 5
ASTM C 636
ASTMD418
ASTME1155M
ASTM E 580
BS 1243
BS 1494: Part 1
BS 1711
BS 3260
BS 3261: Parti
BS 4592
BS 4592: Part 1
1989
1994
Structural design of low-rise buildings - code of practice forstability, site investigation, foundations and ground floor slab forhousing
Building (refuse storage chambers and chutes) regulations
Code of practice for design and installation of ceramic floor tilesand mosaics
Code of practice for the design and installation of terrazzo tileand slab, natural stone and composition block floorings
A,D,HEC,Hy,T,W PSS
Practice for Installation of Metal Ceiling Suspension Systems for MTRCAcoustical Tile and Lay-in Panels
1978
1964
Standard Methods for Testing Pile Yarn Floor CoveringConstruction
Determining FF (floor flatness)
Practice for Application of Ceiling Suspension Systems forAcoustical Tile and Lay-in Panels in Areas Requiring SeismicRestraint
Specification for metal ties for cavity wall construction
Specification for accessories for building purposes: fixing forsheet, roof and wall covering
MTRC
MTRC
MTRC
1975( 1996) Specification for solid rubber flooring
1969(1991) Specification for semi-flexible PVC (Vinyl) floor tiles
A,D,HEC,T
A,H
PSS
TS
TS
PSS
A,HEC,MTRC,T PDS
A,AAHK,H,HEC, PDSHy,T,W
PDS
PDS
1991(1973) Specification for unbacked flexible PVC flooring: homogeneous A,D,H,HEC,T PDSflooring
1987
Industrial type flooring, walkways and stair treads
Specification for open bar gratings
A,D,H,HEC,Hy,T,W PDS
A,D,H,HEC,Hy,T,W PDS
- 2 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
BS 4592: Part 2 1987(1994) Specification for expanded metal grating panels
BS 4592: Part 3 1987
BS 4790
BS 4902
1987
1976
BS 5085: Part 1 1991
BS 5085: Part 2 1991
BS 5325
BS 5385: Part 1 1995
BS 5385: Part 4 1992
BS 5442: Parti 1989
BS 5442: Part 2 1989
BS 5921
BS6431
Specification for cold formed planks
Method for determination of the effects of a small source ofignition on textile floor coverings (hot metal nut method)
Specification for sheet and tile flooring colours for buildingpurposes
Specification for backed flexible PVC flooring: needle-loom feltbacked flooring
Specification for backed flexible PVC flooring: cellular PVCbacking
Code of Practice for Installation of Textile Floor Coverings
Code of practice for the design and installation of internalceramic and natural stone wall tiling and mosaics in normalconditions
Code of practice for tiling and mosaics in specific conditions
Classification of adhesives for use with flooring materials
Classification of adhesives for use with interior wall and ceilingcoverings (excluding decorative flexible materials in roll form)
Method of Determination of Size, Squareness, and Straightncssof Textile Floor Covering Tiles.
Ceramic floor and wall tiles
A,D,H,HEC,Hy,T,W PDS
A,D,H,HEC,Hy,T,W PDS
H,HEC
A,D,HEC,T,W
D,HEC,T
A,D,H,HEC,T
MTRC
TS
PDS
PDS
PDS
PSS
BS 6431: Part 1 1983 (1996) Specification for classification and marking, includingdefinitions and characteristics
BS 6431: Part 10 1984 Method for determination of dimensions and surface quality
A,D,H,HEC,Hy,MTRCT
A,D,H,Hv,T,W,HEC
A,D,HEC,MTRQT
A,D,HEC,MTRC,T
MTRC
A,AAHK,D,H,HEC,Hy,T
A,AAHK,D,fiHEC,Hy,MTRC\T
A,DJ-m,£iHECHv\1\W
PSS
PSS
OS
OS
TS
PDS
OS
TS
- 2 6 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wail & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
BS 6431: Part 11 1983 Method for determination of water absorption
BS 6431: Part 12 1983(1996) Method for determination of modulus of rupture
BS 6431: Part 13 1986( 1996) Method for determination of scratch hardness of surfaceaccording to mohs
BS 6431: Part 14 1983(1996) Method for determination of resistance to deep abrasion.Unglazed tiles
BS 6431: Part 15 1983(1996) Method for determination of linear thermal expansion
BS 6431: Part 16 1983(1996) Method for determination of resistance to thermal shock
A,D,Em,H,HEC,Hy,T,W
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
BS 6431: Part 17 1983(1996) Method for determination of crazing resistance. Glazed tiles A,D,H,HEC,Hy,T
BS 6431: Part 18 1983
BS 6431: Part 19 1984
Methods of determination of chemical resistance. Unglazed tiles A,D,Em,H,HEC,Hy,T,W
Method for determination of chemical resistance. Glazed tiles A,D,Em,H,HEC,Hy,T,W
BS 6431: Part 2 1984(1996) Specification for extruded ceramic tiles with low waterabsorption (E < - 3%) Group Al
BS 6431: Part 20 1984(1996) Method for determination of resistance to surface abrasion.Glazed tiles
BS 6431: Part 22 1986(1996) Method for determination of frost resistance
BS 6431: Part 23 1986(1996) Specification for sampling and basis for acceptance
A,AAHK,D,H,HEC,Hy,MTRC,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
BS 6431: Part 3
BS 6431 :Part 3Section 3.1
BS 6431: Part 3Section 3.2
1986 Extruded ceramic tiles with a water absorption of 3% < E <= 6%. A,AAHK,D,H,Group Al ia HEC,Hy,T
1986( 1996) Specification for general products A,AAHK,D,H,HEC,Hy,T
1986(1996) Specification for products (terre cuite, cotto, baldosin Catalan) A,AAHK,D,H,HEC,Hy,T
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
TS
TS
TS
PDS
PDS
PDS
-27-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall 8c Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
BS 6431 :Part 4
BS 6431: Part 4Section 4.1
BS 6431: Part 4Section 4.2
BS 6431: Part 5
BS 6431: Part 6
BS 6431: Part 7
BS 6431: Part 8
BS 6431: Part 9
BS 8203
BS 8204: Part 1
BS 8204: Part 2
BS 8290: Part 1
BS 8290: Part 2
BS 8290: Part 3
BS EN 649
CISCA
1986
1986(1996)
1986(1996)
1986(1996)
1984(1996)
1986(1996)
1986(1996)
1984(1996)
1996
1987
1987
1991
1997
Extruded ceramic tiles with a water absorption of 6% < E <=10%. Group Al lb
1986(1996) Specification for general products
1986(1996) Specification for products (terre cuite, cotto, baldosin Catalan)
Specification for extruded ceramic tiles with a water absorptionofE>10%.GroupAll l
Specification for dust-pressed ceramic tiles with a low waterabsorption (E <= 3%). Group Bl
Specification for dust-pressed ceramic tiles with a waterabsorption of 3% < E <= 6%. Group B11 a
Specification for dust-pressed ceramic tiles with a waterabsorption of 6% < E <= 10%. Group Bl lb
Specification for dust-pressed ceramic tiles with a waterabsorption of E > 10%. Group B i l l
Code of practice for installation of sheet and tile flooring
Code of practice for concrete bases and screeds to receive in-situflooring
Code of practice for concrete wearing surfaces
Code of practice for design
Specification for Performance of Components and Assemblies ofSuspended Ceilings
Code of Practice for Installation and Maintenance of SuspendedCeilings
Resilient floor coverings. Homogeneous and heterogeneouspoly vinyl chloride floor coverings. Specification
Recommended Test Procedures for Access Floors
A,AAHK,DJiHEC,Hy,T
A,AAHK,D,H,HEQHy/T
A,AAHK,D,H,HEC,Hy,T
A,D,H,HEC,H>\T
A,D,H,HEC,Hy,MTRC/F
A,D,H,HF.C,Hv,T
AAH,HEC,Hy/r
A,D,H,HKC\Hv,T
Di lECT
D,H,HKC\MTRC\T
A,D,RMTRC.T
A,MTRC
MTRC
MIRC*
AAHK
MTRC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
FSS
PSS
FSS
PDS
PSS
PDS
TS
- 2 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Partition, Ceiling,Wall & Floor
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
CP202
CP 204: Part 2
CP290
CRI104
BS 8000: Section11.1
BS1125
BS1188
BS 1189
BS 1212
BS 1212: Parti
BS 1212: Part 2
BS 1212: Part 3
BS 1212: Part 4
BS 1244: Part 2
BS 1254
BS 1390
BS 1876
BS 1968
1972
1970
1973
1987
1974
1986
1990
1990
1990
1990
1991
1988
1981
1990
1990
1953
Code of practice for tile flooring and slab flooring
In-situ floor finishes: metric units
Code of practice for suspended ceilings and linings of dryconstruction using metal fixing systems
Standard for Installation of Commercial Textile Floorcovering MTRCMaterials
Code of Practice for Wall and Floor Tiling
Specification for WC flushing cisterns (incl. dual flush cisternsand flush pipes)
Specification for ceramic wash basins and pedestals
Specification for baths made from porcelain enamelled cast iron
Float operated valves
Specification for piston type float operated valves (copper alloybody) (excluding floats)
Specification for diaphragm type float operated valves (copperalloy body) (excluding floats)
Specification for diaphragm type float operated valves (plasticsbodied) for cold water services only (excluding floats)
Specification for compact type float operated valves for WCflushing cisterns (incl. floats)
Metal sinks for domestic purposes: specification for sit-on andinset sinks
Specification for WC seats (plastics)
Specification for baths made from vitreous enamelled sheet steel
Specification for automatic flushing cisterns for urinals
Specification for floats for ballvalves (copper)
A,H,HEC,T
A,D,H,HEC,T
A,H,HEC,T
MTRC
MTRC
A,D,H,HEC,T
A,D,H,HEC,T
A,H,D,T,HEC
AAHK,HEC, MTRC
A,AAHK,D,H,HEC,Hy,MTRC,T
A,AAHK,D,H,HEC,Hy,MTRC,T
A,AAHK,D,H,HEC,Hy,MTRC,T
A,AAHK,D,H,HEC,Hy,MTRC,T
A,D,H,HEC,T
A,D,H,HEC,T
A,D,HEC,T
A,D,H,HEC,T
A/D,H,HEC,MTRCJ
PSS
PSS
PSS
PSS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
. 2 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
BS 2456
BS 2879
BS3380
BS 3402
BS 3505
BS 3943
BS 417: Part 2
BS 4346: Part 1
BS 4346: Part 2
BS 4375
BS4514
BS 5255
BS 5412: Part 1
BS 5412: Part 2
BS 5412: Part 3
BS 5412: Part 4
1990
1980(1988)
1982
1969
1986
1979(1988)
1987
1969
1970
1968
1983
1989
1996
1996
1996
1996
Specification for floats (plastics) for float operated valves forcold water services
Specification for draining taps (screw-down pattern)
Specification for wastes (excluding skeleton sink wastes) andbath overflows
Specification for quality of vitreous China sanitary appliances,
UPVC pressure pipes for cold potable water
Specification for plastics waste traps
Specification for galvanised low carbon steel cisterns, cisternlids, tanks and cylinders - metric units
Injection moulded unplasticized PVC fittings for solventwelding for use with pressure pipes, including potable watersupply
Mechanical joints and fittings, principally of unplasticized PVC
Specification for unsintered PTFE tape for thread sealingapplications
Specification for unplasticized PVC soil and ventilating pipes,fittings and accessories
Specification for thermoplastics waste pipe and fittings
Specification for performance of draw-off taps with metal bodiesfor water services: dimension and design characteristics
Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: water tightness and pressure resistancecharacteristics
Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: hydraulic characteristics
Specification for performance of draw-off taps with metal bodies AJ),IiT'for water services: mechanical and endurance characteristics
A,AAHK,D,H,HEC,Hy,MTRC,T
AAHK
A,D,H,HECJ
A,D,H,HEC,T
A,B,C,D,H,HEC,Hy,T
A,D,H,HEC,T
A,AAHK,D,H,HEC,Hy,T
A,B,D,H,HEC,T
A,B,D,H,HEC,T
A,D,H,HEC,T
A,B,D,H,HEC,T
AMU iEC/rAJXRHECT
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-30-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
BS 5412: Part 5 1996
BS 5503: Parti 1977
BS 5503: Part 2 1977
BS 5503: Part 3 1990
BS 5504: Parti 1977
BS 5504: Part 2 1977
BS 5504: Part 3 1977
BS 5504: Part 4 1990
BS 5520
BS 5572
BS 5627
BS 6700
BS 6974
BS864
1977
1994
1984
BS 6340: Part 8 1985
1987
1991
Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: Physio-chemical characteristics : materialscoatings
Vitreous china washdown WC pans with horizontal outlet:connecting dimensions
Vitreous china washdown WC pans with horizontal outlet:materials, quality, performance and dimensions other thanconnecting dimensions
Vitreous china washdown WC pans with horizontal outlet:specification for WC pans with horizontal outlet for use with7.5L maximum flush capacity cisterns
Wall hung WC pan with close coupled cistern. Connectingdimensions
Wall hung WC pan with independent water supply. Connectingdimensions.
Wall hung WC pans. Materials and quality and functionaldimensions other than connecting dimensions
Specification for wall hung WC pans for use with 7.5L maximumflush capacity cisterns
Specification for vitreous china bowl urinals (rimless type)
Code of practice for sanitary pipework
Specification for plastics connectors for use with horizontaloutlet vitreous china WC pans
Specification for prefabricated shower trays made from glazedceramic
Specification for design, installation, testing and maintenance ofservices supplying water for domestic use within buildings andtheir curtilages
Specification for unsintered PTFE tape for thread sealingapplications (coarse threads)
Capillary and compression tube fittings of copper and copperalloy
PDS
A,D,H,HEC,T
A,D,H,HEC,T
A,D,H,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC5T
A,D,H,HEC,T
AAH,HEC,T
A,D,H,HECST
A,H,HEC,T
A,D,H,HEC,MTRC,T
A,D,HEC,T
MTRC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PSS
PDS
PDS
-31 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Plumbing
Plumbing
Plumbing
Plumbing
Plumbing
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
BS 864: Part 2
BS EN 1057
BS EN 248
CAP 123
CP342
BS 1091
BS1431
BS 1494: Part 1
BS 2997
BS 3083
BS 402: Part 1
BS4154
BS 4576
BS 4576: Part 1
BS460
BS 476: Part 3
1983
1996
1992
1963(1980)
1960(1980)
1964
1958(1980)
1988
1990
1985(1994)
1989
1989
1964(1981)
1975
BS 5427 1976
Specification for capillary and compression fittings for coppertubes
Copper and copper alloys. Seamless, round copper tubes forwater and gas in sanitary and heating applications
Sanitary taps: general technical specifications forelectrodeposited nickel chrome coatings
Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations
Code of practice for centralised hot water supply
Specification for pressed steel gutters, rainwater pipes, fittingsand accessories
Specification for wrought copper and wrought zinc guttersrainwater goods
Specification for accessories for building purposes: fixing forsheet, roof and wall covering
Specification for aluminium rainwater goods
Specification for hot-dip zinc coated and hot-dip aluminium/zinccoated corrugated steel sheets for general purposes
Specification for plain thick tiles & fittings
Corrugated plastics translucent sheets made from thermo-settingpolyester resin (glass fibre reinforced)
Unplasticized polyvinyl chloride (PVC-U) rainwater goods andaccessories
Unplasticized polyvinyl chloride (PVC-U) rainwater goods andaccessories - half-round gutters and pipes of circular crosssections
Specification for cast iron gutters, rainwater goods
External fire exposure roof test
Code of practice for performance and loading criteria for profiledsheeting in building
A,AAHK,D,H,HEC,T
AAHK
A,D,HEC,T
A,H,HECJ
A,D,HEC,T
A,D,HEC,T
A,AAHK,D,H,HEC,Hy,T,W
A,D,HEC,T
A,AAHK,D,H,HEQT
A,D,HEC,Hy,T,W
A,AAHK,D,H,HEQT
A3,D,H,HEC,T
A,D,H,HEC,Hy,MTRCJ
A,D,H,HEC,T
A,AAHK,B,RHEC,T
A,AAHK,D,I I,HECT
PDS
PDS
PDS
TR
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PSS
-32-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
Roofs
BS 5534: Part 1
BS 5534: Part 2
BS 6229
BS 6367
BS 6399: Part 3
BS 680: Part 1
BS 680: Part 2
BS6915
BS7021
BS747
BS 8000: Part 4
BS8217
BS EN 490
BSEN491
CAP 123
CP 143: Parti
CP 143: Part 10
CP 143: Part 12
CP 143: Part 15
CP 143: Part 5
1997
1986
1982
1983
1988
1944
1971
1988
1989
1994
1989
1994
1994
1994
1958
1973
1970(1988)
1973(1986)
1964
Code of practice for slating and tiling - design
Design charts for fixing of slating and tiling against wind uplift
Code of Practice for design of flat roofs with continuouslysupported coverings
Code of practice for drainage of roofs & paved areas
Loading for buildings - code of practice for imposed roof loads
Specification for roofing slates - imperial units
Specification for roofmg slates - metric units
Specification for design and construction of fully supported leadsheet roof and wall coverings
Code of practice for thermal insulation of roofs externally bymeans of sprayed rigid polyurethane (PUR) or polyisocyanurate(PIR) foam.
Specification for roofing felts
Workmanship on building sites: code of practice for waterproofing
Code of practice for built-up felt roofing
Concrete roofmg tiles & fittings. Product specifications
Concrete roofing tiles & fittings. Test methods
Building (Construction) Regulations Part XI and Part III
Code of practice for sheet, roof and wall covering: aluminiumcorrugated & troughed
Code of practice for sheet roof & wall coverings: galvanisedcorrugated steel. Metric units
Code of practice for sheet roof & wall coverings: copper. Metricunits
Code of practice for sheet roof & wall coverings: aluminium.Metric units
Code of practice for sheet roof & wall coverings: zinc
A,AAHK,D,HEC,Hy,T,W
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,AAHK,D5HEC,T
PSS
PSS
PSS
PSS
PSS
PDS
PDS
PSS
A,D,HEC,T PSS
A,D,H,HEC,Hy,T,W PDS
A,D,HEC,T PSS
AAHK
A,D,HEC,T
A,D,HEC,T
A,D,HEC9T
A5AAHK,D,H,HEC,T
A,AAHK,D,H,HEC,T
A,AAHK,D,H,HEQT
A.D.HECT
PSS
PDS
TS
TR
PSS
PSS
PSS
PSS
PSS
-33-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Roofs
Roofs
Roofs
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
Sound Insulation
CP144
CP 144: Part 3
CP 144: Part 4
ASTM E 1264
BS 2750
BS 2750: Part 2
BS 2750: Part 3
BS 2750: Part 4
BS 2750: Part 5
BS 2750: Part 6
BS 2750: Part 7
BS 2750: Part 9
BS5821
BS 5821: Part 3
BS 8233
BS EN 20354
BS EN ISO 140-3
BS EN ISO 3746
1970
1970
1980
1980
1980(1993)
1980(1993)
1980(1993)
1980(1993)
1984(1993)
1984(1993)
1987
1993
1995
1996
Roof coverings
Roof coverings - built-up bitumen flet. Metric units
Proof coverings - mastic asphalt. Metric units
Standard Classification for Acoustical Ceiling Products
Measurement of sound insulation in buildings and of buildingelements
Statement of precision requirements
Laboratory measurements of airborne sound insulation ofbuilding elements
Field measurements of airborne sound insulation between rooms
Field measurements of airborne sound insulation of facadeelements and facades
Laboratory measurements of impact sound insulation of floors
Field measurements of impact sound insulation of floors
Laboratory measurement of room-to-room airborne soundinsulation of a suspended ceiling with a plenum above it
Methods for rating the sound insulation in building and ofbuilding elements.
Methods for rating the airborne sound insulation of facadeelements and facades
Code of practice for sound insulation and noise reduction forbuildings
Acoustics. Measurement of sound absorption in a reverberationroom
Acoustics. Measurement of sound insulation in buildings and ofbuilding elements - Laboratory measurements of airborne soundinsulation of building elements
Acoustics. Determination of sound power levels of noise sources AAHKusing sound pressure. Survey method using an envelopingmeasurement surface over a reflecting plane
MTRC
A,D,H,HEC,Hy,T
A,AAHK,H,HEC,Hy,T
MTRC
A,Ep,D,HEC,T
A
A
A
A
A
A
A
A,D,Ep,HEC,T
A
A,Ep,D,HEC,T
AAHK
AAHK
PDS
PDS
PDS
OS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
PSS
TS
TS
TS
-34-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
Sound Insulation
Sound Insulation
Sound Insulation
Stairs
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
BS EN ISO 717-1
BS EN ISO 717-2
CP 153: Part 3
BS 5395: Part 1
ASTME 119
ASTME 136
ASTM E 84
BA
BA
BS 3019: Part 2
BS 3869
BS 3927
BS 3958: Part 1
BS 3958: Part 2
BS 3958: Part 3
BS 3958: Part 4
BS 3958: Part 5
BS 3958: Part 6
1997
1997
1972
1977(1984)
1995
1996
1960
1965
1986
1982
1982
1985
1982
1986
1972(1980'
Airborne sound insulation
Impact sound insulation
Windows and rooflights - sound insulation
Stairs, ladders and walkways - Code of practice for the design ofstraight stairs
Test Methods for Fire Tests of Building Construction andMaterials
Test Method for Behaviour of Materials in a Vertical TubeFurnace at 750°C.
Test Method for Surface Burning Characteristics of BuildingMaterials
Code of practice for overall thermal transfer value in buildings
Code of practice for fire resisting construction
Austenitic stainless and heat-resisting steels
Specification for rigid expanded polyvinyl chloride for thermalinsulation purposes and building applications
Specification for rigid phenolic foam (PF) for thermal insulation D,HEC,Tin the form of slabs and profiled sections
Thermal insulation materials - magnesia preformed insulation
Thermal insulation materials - calcium silicate preformedinsulation
Thermal insulation materials - metal mash faced man-mademineral fibre mattresses
Thermal insulation materials - bonded preformed man-mademineral fibre pipe sections
Thermal insulation materials - specification for bonded man-made mineral fibre slabs
Thermal insulation materials - finishing materials, hard settingcomposition, self-setting cement and gypsum plaster
A
A
A,D,Ep,HEC,T
AAHK,HEC,Hy,MTRC
MTRC
MTRC
MTRC
A,B,Ep,Em,H,HEC
A,BAEm,H,HEC?T
H
D,HEQT
PSS
PSS
PSS
PSS
TS
TS
TS
PSS
PSS
PDS
PDS
PDS
D,HEC,T
D,HEQT
D,HEC9T
D,HEC,T
D,HEC,T
D,HEC,T
PDS
PDS
PDS
PDS
PDS
PDS
-35-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
D,HEC
A,D,HEC,T
D,HEC,T
A,D,EmJUiEC,MTRC,T
A,D,HEC,T
MTRC
A,D,Em,H,HEC,MTRC
A,HEC
MTRC
MTRC
MTRC
A,CJXHm,ILHKl\HyXW
AXM^HmJiJUU1,Hy/IWV
AJ),IIy;i"AV
A J ' D . H m l l IiI-<"IK/I
Aj)jn:c.iis.r,\v
A,Bj:3J1,l!KCJIy;T,W
TYPE
TS
PDS
PDS
PSS
PDS
PDS
PSS
TS
TR
OS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
BUILDINGS
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Thermal Insulation
Drainage
Drainage
Drainage
Drainage
Drainage
Drainage
BS 4790
BS 5241: Parti
BS 5241: Part 2
BS 5422
BS 5803
BS 5803: Parti
BS 5970
BS874
CAP 123
UL
UL 1479
UL 2079
AASHTODesignation M252
BS1194
BS 1196
BS 2760
BS 435
BS437
1987
1994
1991
1990
1985(1994)
1992
1973(1980)
1981
1969
1989
1973
1975(1993)
1978
Method for determination of the effects of a small source ofignition on textile floor coverings (hot metal nut method)
Specification for sprayed foam thermal insulation appliedexternally
Specification for dispensed foam for thermal insulation orbuoyancy applications
Method for specifying thermal insulating materials on pipes,ductwork and equipment (in the temperature range -40°C to+700°C)
Thermal insulation for use in pitched roof spaces in dwellings
Man-made mineral wool thermal insulation mats
Code of Practice for thermal insulation of pipework andequipment (in the temperature range -100°C to +87°C)
Methods for determining thermal insulating properties withdefinitions of thermal insulating terms
Building (energy efficiency) regulations
Fire Resistance Directory (Latest edition)
Fire Tests of Through-Penetration Firestopping
Tests for Fire Resistance of Building Joint Systems
Standard specification for corrugated polyethylene drainagetubing
Concrete porous pipes for undcr-drainage
Specification for clayware field drain pipes and junctions
Specification for pitch-impregnated fibre pipes and fittings forbelow and above ground drainage
Specification for dressed natural stone kerbs, channels,quadrants and setts
Specification for cast iron spigot and socket drainpipes andfittings
- 3 6 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
Drainage
Drainage
Drainage
Drainage
Drainage
Drainage
Drainage
Outfall
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
BS 4660
BS 4962
BS497
BS 4660
BS 5255
BS534
BS 5480
1989
1989
1976
BS 497: Parti 1976
BS 6087 1990
BS 6367 1983
CAP 123
BS 8005: Part 4 1987
1989
1989
1990
1990
BS 5480: Parti 1977
BS 5480: Part 2 1982
Specification for unplasticized polyvinyl chloride (PVC-U)pipes and plastics fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage
Specification for plastics pipes and fittings for use as sub-soilfield drains
A,B,C,D,H,HEC, PDSHy,MTRC,T,W
A,D,H,HEC,Hy, PDSMTRC,T,W
Specification for manhole covers, road gully, gratings and frames A,D,HEC,Hy,T, W PDSfor drainage purposes
Specification for manhole covers, road gully gratings and frames A,D,H,HEC,Hy,T,W PDSfor drainage purposes - cast iron and cast steel
Specification for flexible joints for grey or ductile cast irondrainpipes and fitting (BS 437) and for discharge and ventilatingpipes and fittings (BS 416)
Code of practice for drainage of roofs and paved areas
Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations, Part IV, Drainage Works
Guide to design and construction of outfalls
A,D,H,HEC,Hy,T PDS
A,D,HEC,Hy,T,W PSS
D,Ep,H,HEC,T
Specification for unplasticized polyvinyl chloride (PVC-U) A,B,C,D,H,HEC,pipes and plastics fittings of nominal sizes 110 and 160 for below Hy,MTRC,T,Wground gravity drainage and sewerage
TR
PSS
PDS
Specification for thermoplastics waste pipe and fittings A,D,H,HEC,Hy,T PDS
Specification for steel pipes, joints and specials for water and A,C,D,Em,H,HEC, PDSsewage Hy,MTRC,T,W
Specification for glass reinforced plastics (GRP) pipes Joints and A,D,Ep,H,HEC,T, W PDSfittings for use for water supply or sewerage
Dimensions, materials and classification
Design and performance requirements
A,D,Ep,H,HEC5T PDS
A,D,Ep,H,HEC,T PSS
-37-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
DRAINAGESERVICES
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Sewerage
Conveyors
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
BS5481
BS 8005
BS 8005: Part 0
BS 8005: Part 1
BS 8005: Part 2
BS 8005: Part 3
BS 8005: Part 4
BS EN 598
DSD
JIS B8805
BS5311
BS 88: Part 1
BS 88: Part 3.1
BS 88: Section 2.1
BS EN 60269-1
1977
1987
1987
1987
1989
1987
1995
1987
1976
1996
1988
1995
1988
1994
1977(1989) Specification for unplasticized PVC pipe and fittings for gravity A,D,H,HEC,Hy,sewers " " ' MTRCJ,W
PDS
Sewerage
Introduction and guide to data sources and documentation
Guide to new sewerage construction
Guide to pumping stations and pumping mains
Guide to sewers in tunnel
Guide to design and construction of outfalls
Ductile iron pipes, fittings, accessories and their joints forsewerage applications. Requirements and test methods
General specification for sewage plant installations. Issue No. 2. A,Em
Method of calculation for rubber belt conveyor
High-Voltage Alternating-Current Circuit Breakers
A,D,Ep,H,HEC,Hy, OST,W
A,D,Ep,H,HEC,T,W OS
A,AAI IK,D,Ep,H,HEC,Hy,MTRC\T,W
A,D,Ep,H,HEC,T
AAEpJiHEC/F
A,D,Ep,HJIEC;i
A,CJ}JiHIvC\T
A, Em
IIEC
AABKJ1ECW
PSS
PSS
PSS
PSS
PDS
PDS
PSS
PDS
General Requirement IIEC
Supplementary Requirements for Fuses I -se by ! 'nskilled I UiVPersons (Fuses Mainly for Household and Similar Application)
Specification for Fuses for Use by Authorized Persons (MainK I l\i( *for Industrial Application)
PDS
PDS
PDS
General Requirements A,AAlIRj;)J.vin»If,H PDSEC
- 3 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL <feMECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fuel DispensingEquipment
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS EN 60269-2 1995
BS EN 60269-3 1995
IEC 60422
BS 2654
BS 89: Part 1
BS 89: Part 2
BS 89: Part 3
BS 89: Part 4
BS 89: Part 5
BS 89: Part 6
1989
1989
BS 5501: Parti 1977
BS 5501: Part 2 1977
BS 5501: Part 4 1977
BS 5501: Part 5 1977
BS 5501: Part 6 1977
1990
1990
1990
1990
1990
1990
Supplementary Requirements for Fuses for Use by Authorized A,AAHK,D,Em,H,H PDSPersons (Fuses Mainly for Industrial Application) EC,W
Supplementary Requirements for Fuses Used by Unskilled HECPersons (Fuses Mainly Use by Unskilled Persons (Fuses Mainlyfor Household and Similar Applications)
Supervision and Maintenance Guide for Insulating Mineral HECInsulating Oils in Electrical Equipment
Specification for Manufacture of Vertical Steel Welded Non- HECRefrigerated Storage Tanks with Butt Welded Shells for thePetroleum Industry
General Requirements
Oil Immersion 'o!
Power Filling 'q'
Flameproof Enclosure 'd'
Increased Safety 'e'
Specification for Definitions and General RequirementsCommon to All Parts
Specification for Special Requirements for Ammeters andVoltmeters
Specification for Special Requirements for Wattmeters andVarmeters
Specification for Special Requirements for Frequency Meters
Specification for Special Requirements for Phase Meters, Power HECFactor Meters and Synchroscopes
Specification for Special Requirements for Ohmmeters(Impedance Meters) and Conductance Meters
PDS
PSS
PDS
A,D,Em,HEC,Hy PDS
A,D,Em,HEC5Hy PDS
A,D,Em3HEC,Hy PDS
A,D,Em,HEC,Hy PDS
A,D,Em,HEC,Hy PDS
HEC
HEC
HEC
HEC
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
-39-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Motorised Drives &Machinery
Motorised Drives &Machinery
Substation
Substation
Substation
Substation
Substation
BS 89: Part 7
BS 89: Part 8
BS 89: Part 9
IEC 38
IEC 60156
IEC 60214
IEC 60289
IEC 60751
IEC 34-11
IEC 54-11
IEC 1024-1-1
IEC 230
IEC 270
IEC 60-1
IEC 60-2
1990
1990
1990
1975
1995
1989
1988
1983
1978
1993
1981
1973
1973
Specification for Special Requirements for Multi-Function HECInstruments
Specification for Special Requirements for Accessories HEC
Recommended Test Methods HEC
IEC standard voltages HEC
Insulating Liquids - Determination of the Breakdown Voltage At HECPower Frequency - Test Method
On-Load Tap-Changer
Reactors
Industrial Platinum Resistance Thermometer Sensors
HEC
HEC
HEC
Rotating Electrical Machines — Built-in Thermal Protection HEC
Rotating Electrical Machines Build-in Thermal Protection HEC
Protection of Structures Against Lightning - Part 1: General HECPrinciples - Section 1: Guide A: Selection of Protection Levelsfor Lightning Protection Systems
Impulse tests on cables and their accessories
Partial Discharge Measurements
HEC
HEC
High Voltage Test Techniques - General Definitions and Test HECRequirements
High Voltage Test "Techniques - Test Procedures HBC
PDS
PDS
TS
OS
TS
PDS
PDS
PDS
PDS
PDS
PSS
TS
TS
TS
TS
-40-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
Substation
IEC 60-3
IEC 60-4
IEC 60060-2
IEC 60071-1
IEC 60071-2
IEC 60085
IEC 60086-1
IEC 60086-2
IEC 60086-3
IEC 60086-4
IEC 60622
IEC 60623
IEC 60871-1
1976
1977
1994
1993
1996
1984
1996
1997
1995
1996
1988
1990
1997
High Voltage Test Techniques - Measuring Devices HEC
High Voltage Test Techniques - Application Guide for HECMeasuring Devices
High Voltage Test Techniques : Measuring Systems HEC
Insulation Co-ordination : Definitions, Principles and Rules HEC
Insulation Co-ordination - Part 2: Application Guide
Thermal Evaluation and Classification of Electrical Insulation HEC
Primary Batteries: General
Primary Batteries : Specification Sheets
Primary Batteries : Watch Batteries
Primary Batteries : Safety Standard for Lithium Batteries
Sealed Nickel-Cadmium Prismatic Rechargeable Single Cells HEC
Vented Nickel-Cadmium Prismatic Rechargeable Single Cells HEC
Shunt Capacitors for AC. Power Systems Having A RatedVoltage Above 1000 V : General Performance, Testing andRating - Safety Requirements - Guide for Installation andOperation
TS
TS
TS
PSS
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
PSS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
IEC 60871-2 1987 Shunt Capacitors for AC. Power Systems Having A RatedVoltage Above 660 V : Endurance Testing
HEC PDS
- 4 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Substation
Substation
Substation
Substation
Substation
Substation
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
IEC 60871-3
IEC 60871-4
IEC 60896-1
IEC 60896-2
IEC 61024-1
IEC 61024-1-2
BS 5227
BS5419
BS EN 60439-3
BS EN 60439-4
BS EN 60439-5
ESI 37-2
IEC 157-1
1996
1996
1987
1995
1990
1998
1975
1977
1991
1991
1996
1990
1973
Shunt Capacitors for AC. Power Systems Having A Rated HECVoltage Above 1000 V : Protection of Shunt Capacitors andShunt Capacitor Banks
Shunt Capacitors for Ac Power Systems Having A Rated Voltage HECAbove 1000 V : Internal Fuses
Stationary Lead-Acid Batteries - General Requirements andMethods of Test. : Vented Types
HEC
Stationary Lead-Acid Batteries - General Requirements and Test IffiCMethods : Valve Regulated Types
Protection of Structures Against Lightning : General Principles HEC
Protection of Structures Against Lightning : General Principles -Guide B - Design, Installation, Maintenance and Inspection ofLightning Protection Systems
A.C. metal-enclosed switchgear and controlgcar of rated voltageabove ikV and up to and including 72.5kV
Air-break switches, air break disconnectors, air-break switchdisconnectors and fuse-combination units for voltages up to andincluding 1000V ax. and 1200V d.c.
Particular requirements for Low-Voltage Switchgear andControlgear Assemblies Intended to be Installed in places WhereUnskilled Persons have Access to Their Use. DistributionBoards
Particular Requirements for Assemblies for Construction Sites(ACS)
Particular Requirements for Assemblies Intended to Be InstalledOutdoors in Public Places, Cable Distribution Cabinets (CDCs)for Power Distribution in Networks
Factory-built assemblies of switchgear and controlgear forvoltages up to and including 1000V a.c. and 1200V d.c.
Low Voltage Switchgear and Controlgear - Circuit Breakers
I IEC
HEC
HEC
HiiEC
PDS
PDS
TS
TS
PSS
PSS
PDS
PDS
PDS
HEC
.HEC
HEC
HEC
PDS
PDS
PDS
PDS
-42-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
IEC298 1990
IEC 439-1 1985
IEC 60099-1 1991
IEC 60255
IEC 60255-03 1989
IEC 60255-06 1988
IEC 60255-08 1990
IEC 60255-16 1982
IEC 60255-18 1982
IEC 60255-19 1983
IEC 60255-19-1 1983
IEC 60255-20 1984
IEC 60255-21-1 1988
IEC 60255-21-2 1988
IEC 60255-21-3 1993
IEC 60255-22-1 1988
A.C. metal-enclosed switchgear and controlgear for rated voltage HECabove lkV and up to and including 72.5kV
Low-voltage switchgear and control gear assemblies HEC
Surge Arresters : Non-Linear Resistor Type Gapped Arresters for HECAC. Systems
Electrical Relays HEC
Single Input Energizing Quantity Measuring Relays with HECDependent Or Independent Time
Measuring Relays and Protection Equipment HEC
Thermal Electrical Relays HEC
Impedance Measuring Relays HEC
Dimensions for General Purpose All-Or-Nothing Relays HEC
Sectional Specification: Electromechanical All-Or-Nothing HECRelays of Assessed Quality
Blank Detail Specification: Electromechanical All-Or-Nothing HECRelays of Assessed Quality - Test Schedules 1, 2 and 3
Protection (Protective) Systems HEC
Vibration, Shock, Bump and Seismic Tests on Measuring Relays HECand Protection Equipment: Vibration Tests (Sinusoidal)
Shock and Bump Tests HEC
Seismic Tests HEC
Electrical Disturbance Tests for Measuring Relays and HECProtection Equipment: 1 MHz Burst Disturbance Tests"
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
TS
TS
TS
TS
-43-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
IEC 60255-22-2
IEC 60255-22-3
IEC 60255-22-4
IEC 60255-23
IEC 60255-5
IEC 60265-1
IEC 60269-3-1
IEC 60269-4
IEC 60270
IEC 60273
IEC 60282-1
IEC 60282-2
IEC 60439
IEC 60439-1
IEC 60439-2
1996
1989
1992
1994
1977
1998
1994
1986
1981
1990
1998
1997
1992
1987
Electrostatic Discharge Tests
Radiated Electromagnetic Field Disturbance Tests
Fast Transient Disturbance Test
Contact Performance
Insulation Tests for Electrical Relays
HEC
HEC
HEC
HEC
HEC
High-Voltage Switches t : Switches for Rated Voltages Above 1 HECkV and Less Than 52 kV
Supplementary Requirements for Fuses for Use by Unskilled HECPersons (Fuses Mainly for Household and Similar Applications)
Supplementary Requirements for Fuses for Use by Unskilled HECPersons (Fuses Mainly for Household and Similar Applications)
Partial Discharge Measurements HEC
Characteristic of Indoor and Outdoor Post Insulators for Systems HECwith Nominal Voltages Greater Than 1000 v
High-Voltage Fuses - Part 1: Current-Limiting Fuses
High-Voltage Fuses - Part 2: Expulsion Fuses
Low-Voltage Switchgear and Controlgear Assemblies
Type-Tested and Partially Type-Tested Assemblies
Particular Requirements for Busbar Trunking Systems(Bus ways)
HEC
HEC
HEC
HEC
HEC
TS
TS
TS
PDS
TS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
-44-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
IEC 60439-3
IEC 60439-4
IEC 60439-5
IEC 60466
IEC 60694
IEC 60947
IEC 60947-1
IEC 60947-2
IEC 60947-3
1990
1990
1996
1987
1996
1996
1995
1998
IEC 60947-4-1 1990
IEC 60947-4-2 1995
IEC 60947-5-1 1997
IEC 60947-5-2 1997
IEC 60947-5-4 1996
Particular Requirements for Low-Voltage Switchgear and HECControlgear Assemblies Intended to Be Installed in Places WhereUnskilled Persons Have Access for Their Use - DistributionBoards
Particular Requirements for Assemblies for Construction Sites HEC(Acs)
Particular Requirements for Assemblies Intended to Be Installed HECOutdoors in Public Places - Cable Distribution Cabinets (CDCs)for Power Distribution in Networks
AC. Insulation-Enclosed Switchgear and Controlgear for Rated HECVoltages Above 1 kV and Up to and Including 38 kV
Common Specifications for High-Voltage Switchgear and HECControlgear Standards
Low-Voltage Switchgear and Controlgear HEC
General Rules HEC
Circuit-Breakers HEC
Switches, Disconnectors, Switch-Disconnectors and Fuse- HECCombination Units
Contactors and Motor-starters HEC
AC Semiconductor Motor Controllers and Starters HEC
Control Circuit Devices and Switching Elements : HECElectromechanical Control Circuit Devices
Proximity Switches HEC
Method of Assessing the Performance of Low Energy Contacts. HECSpecial Tests
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
-45-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
Transformer
BS EN 60742 1996
IEC 185
IEC 186
IEC 354
IEC 60044
IEC 60044-1
IEC 60044-2
IEC 60044-6
IEC 60076-1
IEC 60076-2
IEC 60076-3
IEC 60076-5
IEC 60076-8
IEC 60296
IEC 606
1969
1972
1996
1997
1992
1993
1993
1980
IEC 60076-3-1 1987
1976
1997
1982
1978
Isolating Transformers and Safety Isolating Transformers. HECRequirements
Current transformers
Voltage transformers
Loading Guide for Oil-Immersed Transformers
Instruments Transformers
Current Transformer
Inductive Voltage Transformer
Requirement for Protective Current Transformers for Transient HECPerformance
Power Transformers : General
Power Transformers : Temperature Rise
Power Transformers : Insulation Levels and Dielectric Tests HEC
Power Transformers. External Clearances in Air
Power Transformers. : Ability to Withstand Short-Circuit
Power Transformers : Application Guide
Specification for Unused Mineral Insulating Oils forTransformers and Switchgear
Application guide for Power Transformers
PDS
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
OS
PDS
PSS
PDS
PSS
-46-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
AAHK,HEC
HEC
TYPE
PDS
PDS
PDS
PSS
PDS
PDS
PDS
PSS
PDS
PSS
PDS
TS
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Transformer
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
Wiring & Cables
Wiring & Cables
IEC 60726
IEC 60146
IEC 60146-1-1
IEC 60146-1-2
IEC 60146-1-3
IEC 60146-2
IEC 60146-3
IEC 60146-4
IEC 60146-5
IEC 60146-6
BS 6360
1982
1991
1991
1991
1974
1977
1986
1988
1992
1991
BS 6469: Part 1.1 1992
Wiring & Cables BS 6469: Part 4.2 1992
Wiring & Cables BS 6469: Part 5.1 1992
Dry-Type Power Transformers
Semiconductor Convertors
General Requirements and Line Commutated Convertors:Specifications of Basic Requirements
Application Guide
Transformers and Reactors
Semiconductor Self-Commutated Convertors
Semiconductor Direct D.c. Convertors (DC. ChopperConvertors)
Method of Specifying the Performance and Test Requirements of HECUninterruptible Power Systems
Switches for Uninterruptible Power Systems (Ups Switches)
Application Guide for the Protection of SemiconductorConvertors Against Overcurrent by Fuses
Specification for Conductors in Insulated Cables and Cords
Insulation and Sheathing Materials of Electric Cables : Methods HECof Test for General Application : Measurement of Thickness andOverall Dimensions. Tests for Determining the MechanicalProperties
GeinginAir. Measurement of Mass Increase. Long-Term HECStability Test. Test Method for Copper-Catalysed OxidativeDegradation
Drop-point. Separation of oil. Lower temperature brittleness. HECTotal acid number. Absence of corrosive components.Permittivity at 23 C. D.C. resistivity at 23 C and 100 C
TS
TS
-47-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS 7655 1993
BS 7655: Part 1.1 1993
BS 7655: Part 1.2 1993
BS 7655: Part 1.3 1993
BS 7655: Part 1.4 1993
BS 7655: Part 1.5 1993
BS 7655: Part 1.6 1993
BS 7655: Part 10.1 1996
BS 7655: Part 2.1 1993
BS 7655: Part 2.2 1993
BS 7655: Part 2.3 1993
BS 7655: Part 2.4 1993
BS 7655: Part 2.5 1993
BS 7655: Part 2.6 1993
BS 7655: Part 3.1 1993
BS 7655: Part 3.2 1993
HEC
Specification for Insulating and Sheathing Materials for Cables HEC
Elastomeric Insulating Compounds Harmonized Types
General 90°C Application
XLPE
Oil Resisting Types
Flame Retardant Composites
Coil End Lead Types
Polyethylene Sheathing Compounds : Thermoplastic Medium HECDensity Polyethylene (MDPE) Sheathing Compound
Elastomeric Sheathing Compounds Harmonized Types
Heat Resisting Types
General Application
Welding Cable Covering
Sheathing Compounds Having Low Smoke and Acid GasEmission for General Applications
Sheathing Compounds for Ship Wiring and OffshoreApplications
PVC Insulating Compounds Harmonized Types
Hard Grade Types
HEC
HEC
HEC
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
HEC
HEC
HEC
HEC
HEC
HKC
HEC
HHC
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 4 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS 7655: Part 4.1
BS 7655: Part 4.2
BS 7655: Part 4.3
BS 7655: Part 5.1
BS 7655: Part 6.1
IEC 183
IEC 228
IEC 287
IEC 332-3
IEC 502
IEC 60055-1
IEC 60055-2
IEC 60141-1
IEC 60227
1993
1993
1993
1993
1993
1984
1982
1982
1994
1997
1981
1993
HECPVC Sheathing Compounds Harmonized Types
General Application
Special Applications RF Cables
Harmonized cross-linked types
General application Thermoplastic Types
Guide to the selection of high-voltage cables
Conductors of insulated cables
Calculation of the continuous current rating of cables (100% load HECfactor)
Tests on bunched wires or cables
Extruded solid dielectric insulated power cables for ratedvoltages from lkV up to 30kV
Paper-Insulated Metal-Sheathed Cables for Rated Voltages Up HECto 18/30 kV (With Copper Or Aluminium Conductors andExcluding Gas-Pressure and Oil-Filled Cables): Tests on Cablesand Their Accessories
General and Construction Requirements
Tests on Oil-Filled and Gas-Pressure Cables and TheirAccessories : Oil-Filled, Paper-Insulated, Metal-SheathedCables and Accessories for Alternating Voltages Up to andIncluding 400 kV
Polyvinyl Chloride Insulated Cables of Rated Voltages Up to andIncluding 450/750 V
HEC
HEC
PDS
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
PDS
PDS
PDS
PDS
PSS
PDS
OS
TS
PDS
TS
PSS
TS
- 4 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL 8cMECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
IEC 60227-1
IEC 60227-2
IEC 60227-3
IEC 60227-4
IEC 60227-5
IEC 60227-6
IEC 60227-7
IEC 60228
IEC 60245
IEC 60245-1
IEC 60245-2
IEC 60245-3
IEC 60245-4
IEC 60245-5
IEC 60245-6
IEC 60245-7
1998
1997
1997
1997
1998
1985
1995
1978
1994
1994
1994
1994
1994
1994
1994
General Requirements
Test Methods
HEC
HEC
Polyvinyl Chloride Insulated Cables of Rated Voltages Up to and HECIncluding 450/750 V : Non-Sheathed Cables for Fixed Wiring
Sheathed Cables for Fixed Wiring
Flexible Cables (Cords)
Lift Cables and Cables for Flexible Connections
HEC
HEC
HEC
Flexible Cables Screened and Unscreened with Two Or More HECConductors
Conductors of Insulated Cables HEC
Rubber Insulated Cables - Rated Voltages Up to and Including HEC450/750 V
General Requirements
Test Methods
Heat Resistant Silicone Insulated Cables
Cords and Flexible Cables
Lift Cables
Arc Welding Electrode Cables
HEC
HEC
HEC
HEC
HEC
I IEC
Heat Resistant Ethvlene-Vinvl Acetate Rubber Insulated Cables I IEC
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
-50-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
TYPE
PDS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
TS
TS
PDS
PDS
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
IEC 60245-8
IEC 60287
IEC 60287-1-1
IEC 60287-1-2
IEC 60287-2-1
IEC 60287-2-2
IEC 60287-3-1
IEC 60287-3-2
IEC 60332-1
IEC 60332-3
IEC 60420
IEC 60502-1
IEC 60502-2
IEC 60502-2
IEC 60502-4
1998
1994
1993
1994
1995
1995
1995
1993
1992
1990
1997
1997
1997
1997
Cords for Applications Requiring High Flexibility
Electric Cables - Calculation of the Current Rating
Current Rating Equations (100% Load Factor) and Calculation HECof Losses - Section 1: General
Sheath Eddy Current Loss Factors for Two Circuits in FlatFormation
Calculation of Thermal Resistance
A Method for Calculating Reduction Factors for Groups ofCables in Free Air, Protected From Solar Radiation
Sections on Operating Conditions : Reference OperatingConditions and Selection of Cable Type
Economic Optimization of Power Cable Size
Tests on Electric Cables Under Fire Conditions : Test on ASingle Vertical Insulated Wire Or Cable
Tests on Electric Cables Under Fire Conditions : Tests onBunched Wires Or Cables
High-Voltage Alternating Current Switch-Fuse Combinations HEC
Power Cables with Extruded Insulation and Their Accessoriesfor Rated Voltages From lkV (Urn = 1,2 kV) Up to 30 kV (Urn =36 kV): Cables for Rated Voltages of 1 kV (Urn = 1,2 kV) and 3kV (Urn = 3,6 kV)
Power Cable with extruded insulation and their accessories for HECrated voltages from lkV up to 30kV
Cables for Rated Voltages From 6 kV (Urn = 7,2 kV) Up to 30 HECkV (Urn = 36 kV)
Test Requirements on Accessories for Cables with Rated HECVoltages From 6 kV (Urn = 7,2 kV) Up to 30 kV (Urn F 36 kV)
PDS
PDS
TS
-51 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Switchgear
IEC 60754-1
IEC 60754-2
IEC 60794-1
IEC 60794-2
IEC 60794-3
IEC 60840
IEC 60853-1
IEC 60874-0
IEC 60874-1
IEC 60874-1-1
IEC 60885-3
IEC 61244-1
IEC 61244-2
IEC 60099-3
1994
1991
1996
1989
1998
1988
1985
1988
1993
1994
1988
1993
1996
1990
Test on Gases Evolved During Combustion of Materials From HECCables : Determination of the Amount of Halogen Acid Gas
Determination of Degree of Acidity of Gases Evolved During the HECCombustion of Materials Taken From Electric Cables byMeasuring pH and Conductivity
Optical Fibre Cables : Generic Specification HEC
Product Specifications HEC
Duct, Buried and Aerial Cables - Sectional Specification HEC
Tests for Power Cables with Extruded Ins for Rated Volt Above HEC30kV (Um=36kv) Up to 150kV (Um=170kV)
Calculation of the Cyclic and Emergency Current Rating of HECCables. : Cyclic Rating Factor for Cables Up to and Including18/30(36) kV
Connectors for Optical Fibres and Cables. : Guide for the HECConstruction of Sectional Specifications
Connectors for Optical Fibres and Cables : Generic Specification HEC
Connectors for Optical Fibres and Cables : Blank Detail 11 ECSpecification - Environmental Categories
Electrical Test Methods for Electric Cables, Part 3: Test Methods HECfor Partial Discharge Measurements on Lengths of ExtrudedPower Cables
Long-Term Radiation Ageing in Polymers - Procedures for in- H'KCService Monitoring of Low-Voltage Cable Material
Determination of Long Term. Radiation Ageing in Polymers * HECPart 2: Procedures for Predicting Ageing At Low Dose Rates
Surge Arresters. : Artificial Pollution Testing of Surge Arresters HEC
TS
TS
PDS
PDS
PDS
TS
PSS
PDS
PDS
PDS
TS
PSS
PSS
TS
- 52 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
IEC 60099-4
IEC 60120
IEC 60137
IEC 60158-2
IEC 60158-3
IEC 60168
IEC 60265-2
IEC 60269
IEC 60269-1
IEC 60269-2
1991
1984
1995
1982
1985
1994
1988
1986
1986
IEC 60269-2-1 1988
IEC 60269-3
IEC 60687
1987
1992
IEC 60947-5-5 1997
IEC 60947-6-1 1998
Surge Arresters : Metal Oxide Surge Arresters Without Gaps for HECAC. Systems
Dimensions of Ball and Socket Couplings of String Insulator HECUnits
Insulated Bushings for Alternating Voltages Above 1000 V HEC
Low-Voltage Controlgear.: Semiconductor Contactors (Solid HECState Contactors)
Low-Voltage Controlgear.: Additional Requirements for HECContactors Subject to Certification
Tests on Indoor & Outdoor Post Insulators of Ceramic Material HECOr Glass for Systems with Nominal Voltages Greater Than1,000V
High-Voltage Switches. : High-Voltage Switches for Rated HECVoltages of 52 kV and Above
Low-Voltage Fuses HEC
General Requirements HEC
Supplementary Requirements for Fuses for Use by Authorized HECPersons (Fuses Mainly for Industrial Application)
Supplementary Requirements for Fuses for Use by Authorized HECPersons (Fuses Mainly for Industrial Application)
Supplementary Requirements for Fuses for Use by Unskilled HECPersons (Fuses Mainly for Household and Similar Applications)
Alternating-Current Static Watt-Hour Meters for Active Energy HEC(Classes 0.2s and 0.5s)
Electrical Emergency Stop Device with Mechanical Latching HECFunction
Multiple Function Equipment: Automatic Transfer Switching HECEquipment
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-53-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Transformer
Transformer
Wiring & Cables
Wiring & Cables
Conveyors
Conveyors
Conveyors
Earthing Installations
Earthing Installations
Earthing Installations
Earthing Installations
Fixed ElectricalInstallation
IEC 60947-6-2
IEC 60947-7-1
IEC 60947-7-2
IEC 726
IEC 76
IEC 85
IEC 885
BS 2890
BS 4116: Part 1-4
ISO 340
(BS EN 20340:1993)
AS 1768
BS 4444
BS665I
BS 7430
BS 1363
1998
1989
1995
1982
1993
1984
1988
1989
1992
1988
1991
1989
1992
1991
1984
Control and Protective Switching Devices (Or Equipment) HEC(CPS)
Ancillary Equipment: Terminal Blocks for Copper Conductors HEC
Protective Conductor Terminal Blocks for Copper Conductors HEC
Dry Type Power Transformers
Power Transformers
HEC
HEC
Thermal evaluation and classification of electrical insulation HEC
Electrical Test Methods for Electric Cables HEC
Troughed belt conveyors HEC
Conveyor chains, their attachments and associated chain wheels A,Em
Conveyor belts. Flame retardation. Specifications and test AAIIKmethod
Lightning protection H
1989(1995) Guide to electrical earth monitoring and protective conductor Emproving
PDS
PDS
PDS
PDS
PDS
OS
TS
PDS
PDS
TS
PSS
PSS
Code of practice for protection of structures against lightning A, A Ai IK J >,Km,I i, PSSHI-X\Hy,MTRt\T,W
Code of practice for earthing A.AAHKJ),F,nUl PSSUv,MTR(,\r,W
Specification for 13A fused plugs and switched and unswitched AAHKJH-V, MTRCsocket-outlets
- 5 4 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallation
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
BS EN 60309-2
BS 1361
BS 1362
BS 1363: Parti
BS 1363: Part 2
BS 1363: Part 3
BS 1363: Part 4
BS 196
BS 2754 (IEC60536)
BS 3036
BS 3676
BS 4573
BS 546
BS646
1992
1971
1973
1995
1995
1995
1995
1961
1976
1958(1992)
Specification for industrial plugs, socket-outlets and couplers fora.c. and d.c. supplies
Specification for Cartridge Fuses for AC. Circuits in Domesticand Similar Premises
Specification for General Purpose Fuse Links for Domestic andSimilar Purposes (Primarily for Use in Plugs)
13A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for Rewirable and Non-Rewirable 13A FusedPlugs
Specification for 13A fused plugs and switched and unswitchedsocket-outlets
13A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for Adapters
13 A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for 13a Fused Connection Units Switched andUnswitched
Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthingcontacts for single phase a.c. circuits up to 250 volts
Memorandum. Construction of electrical equipment forprotection against electric shock
Specification. Semi-enclosed electric fuses (ratings up to 100amperes and 240 volts to earth)
A,AAHK,D,Em,H,HEC
A,D,Em,HEC,MTRC,T
A,AAHK,D,Em,H,HEC,MTRC
HEC
A,D,Em
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
A,D,Em
A,AAHK,D,Em,HEQMTRC
A,D,Em,HEC,MTRC
Switches for household and similar fixed electrical installations AAHK,Em
1970( 1979) Specification for 2-pin reversible plugs and shaver socket-outlets AAHK
1950(1988) Specification. Two-pole and earthing pin plugs, socket-outlets A,AAHK,D,Em,and socket-outlet adaptors HEC
1958( 1991) Specification. Cartridge fuse-links (rated up to 5 amperes) for A,D5Em,MTRCa.c. and d.c. service
PDS
PSS
PDS
PDS
PDS
PDS
PDS
-55-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
BS 7264 Shunt capacitors for a.c. power systems having a rated voltage AAHKabove 1000 V
BS 88 Cartridge fuses for voltages up to and including 1000 V ax. and A,AAHK,D,Em,H,1500V d.c. MTRQW
BS 88: Part 4 1988(1992) Specification of supplementary requirements for fuse-links for A,D,Em,HECthe protection of semiconductor devices
BS 88: Part 5 1988(1992) Specification of supplementary requirements for fuse-links for A,D,Ern,HECuse in a.c. electricity supply network
BS 88: Part 6 1988(1992) Specification of supplementary requirements for fuses of A,AAHK,D,Em,Hcompact dimensions for use in 240/415 V a.c. industrial andcommercial electrical installations
BS 88: Section 2.2 1992
BS EN 50086-2-2 1996
BS EN 50086-2-3 1996
BS EN 50086-2-4 1994
BS EN 60127-6 1994
BS EN 60137 1996
BS EN 60269
BS EN 60309-1 1992
BS EN 60831
BS EN 60831-1 1994
Additional requirements for fuses with fuse links for bolted A,D,Em,H,HEC,Wconnections
Pliable Conduit Systems HEC
Flexible Conduit Systems HEC
Conduit Systems Buried Underground HEC
Fuse-holders for miniature cartridge fuse-links Em
Insulated bushings for alternating voltages above 1 kV AAHK
Low-voltage fuses AAHK
Plugs, Socket-Outlets and Couplers for Industrial Purposes : HECGeneral Requirements
Shunt power capacitors of the self-healing type for a.c. systems AAHK,IIhaving a rated voltage up to and including 1000 V
General. Performance, testing and rating. Safety requirements. AAHK,11Guide for installation and operation.
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-56-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL 8cMECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
BS EN 60831-2 1996
IEC 60079
IEC 60079-0
IEC 60079-1
1998
1998
IEC 60079-10 1995
IEC 60079-11 1991
IEC 60079-12 1978
IEC 60079-13 1982
IEC 60079-14 1996
IEC 60079-15 1987
IEC 60079-16 1990
IEC 60079-17 1996
IEC 60079-18 1992
IEC 60079-19 1993
IEC 60079-1A 1975
Ageing test, self-heating test and destruction test
Electrical Apparatus for Explosive Gas Atmospheres
General Requirements
AAHK,H
HEC
HEC
Construction and Verification Test of Flameproof Enclosures of HECElectrical Apparatus
Classification of Hazardous Areas HEC
Intrinsic Safety T HEC
Classification of Mixtures of Gases of Vapours with Air HECAccording to Their Maximum Experimental Safe Gaps andMinimum Igniting Currents
Construction and Use of Rooms Or Buildings Protected by HECPressurisation
Electrical Installations in Hazardous Areas (Other Than Mines) HEC
Electrical Apparatus with Type of Protection 'n' HEC
Artificial Ventilation for the Protection of Analyser(s) Houses HEC
Inspection and Maintenance of Electrical Installations in HECHazardous Areas (Other Than Mines)
Encapsulation 'm' HEC
Repair and Overhaul for Apparatus Used in Explosive HECAtmospheres (Other Than Mines Or Explosives)
Construction and Verification Test of Flameproof Enclosures of HECElectrical Apparatus - First Supplement: Appendix D: Method ofTest for Ascertainment of Maximum Experimental Safe Gap
TS
PDS
PDS
TS
OS
PDS
OS
PSS
PDS
PDS
PSS
PSS
PDS
PSS
TS
-57-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
IEC 60079-2
IEC 60079-20
IEC 60079-4
IEC 60079-4A
IEC 60079-5
IEC 60079-6
IEC 60079-7
IEC 60614-1
IEC 60614-2-1
IEC 60614-2-2
IEC 60614-2-3
IEC 60614-2-4
IEC 60614-2-5
IEC 60614-2-6
IEC 60614-2-7
IEC 60884
1983
1996
1975
1970
1997
1995
1990
1994
1982
1980
1990
1985
1992
1992
1995
Electrical Apparatus, Type of Protection 'p' HEC
Data for Flammable Gases and Vapours, Relating to the Use of HECElectrical Apparatus
Method of Test for Ignition Temperature HEC
Method of Test for Ignition Temperature HEC
Powder Filling "q" HEC
Oil-Immersion 'o' HEC
Increased Safety 'E\ Consolidated Edition HEC
General Requirements HEC
Particular Specifications for Conduits. Section One: Metal HECConduits
Particular Specification for Rigid Plain Conduits of Insulating If ECMaterials
Pliable Conduits of Insulating Material HEC
Pliable Self-Recovering Conduits of Insulating Materials HEC
Flexible Conduits I IEC
Pliable Conduits of Metal Or Composite Materials HEC
Rigid Non-Thrcadablo Conduits of Aluminium Alloy HEC
Plugs and Socket-Outlets for Household and Similar Purposes. HBC
PDS
OS
TS
TS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-58-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fixed ElectricalInstallations
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
IEC 60884-1 1994 General Requirements HEC
IEC 60884-2-1 1987
IEC 60884-2-2 1989
IEC 60884-2-4 1993
IEC 60884-2-5 1995
IEC 60884-2-6 1997
IEC 60079-3 1990
IEC 60884-2-3 1989
BS 649 1958
BS 7117: Part 1-3 1991
BS EN 1960 1997
IP
IP
IP
IP
Particular Requirements for Fused Plugs HEC
Particular Requirements for Socket-Outlets for Appliances HEC
Particular Requirements for Plugs and Socket-Outlets for Selv HEC
Particular Requirements for Adapters
Particular Requirements for Switched Socket-Outlets withInterlock for Fixed Electrical Installations
Spark-Test Apparatus for Intrinsically-Safe Circuits
Particular Requirements for Switched Socket-Outlets WithoutInterlock for Fixed Installations
The performance of reciprocating compression-ignition (diesel)engines, utilizing liquid fuel only, for general purposes
Metering pumps and dispensers to be installed at filling stationsand used to dispense liquid fuel
Specification for electrically bonded rubber hoses and hoseassemblies for dispensing petroleum based fuels
Latest Model code of safe practice for the petroleum industry : Part 6 -Pipeline safety code - Supplement
2nd Edition Model code of safe practice for the petroleum industry : Part 15 -Area classification code for petroleum installations
Latest Model code of safe practice for the petroleum industry : Part 2 -Marketing safety code : Chapter 3 - Design, construction andoperation of distribution installations
1998 Model code of safe practice for the petroleum industry : Part 21 -Guidelines for the control of hazards arising from staticelectricity
HEC
HEC
HEC
HEC
A
Em
A,Em
HEC
HEC
HEC
HEC
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PSS
PSS
PSS
PSS
-59-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Fuel DispensingEquipment
Gates
Gates
Gates
Gates
IP
IP
IP
IP
IP
IP
IP
IP
IP
IP
IP
BS 3470
BS 4092
BS 4092: Part 1
BS 4092: Part 2
1993
3rd Edition
2nd Edition
2nd Edition
1987
1993
4th Edition
3rd Edition
7th Edition
2nd Edition
4th Edition
1975
1966
1966
Model code of safe practice for the petroleum industry : Part 18 - HECOccupational health
Model code of safe practice for the petroleum industry : Part 8 - HECDrilling and production safety code for offshore operations
Model code of safe practice for the petroleum industry : Part 13 - HECPressure piping systems examination
Model code of safe practice for the petroleum industry : Part 12 - HECPressure vessel systems examination
Model code of safe practice for the petroleum industry : Part 9 - HECLiquefied petroleum gas. Volume 1. Large bulk pressure storage& refrigerated LPG
Model code of safe practice for the petroleum industry : Part 19 - HECFire precautions at petroleum refineries and bulk storageinstallations
Model code of safe practice for the petroleum industry : Part 4 - HECDrilling & production safety code for onshore operation
Model code of safe practice for the petroleum industry : Part 3 - HECRefining safety code
Model code of safe practice for the petroleum industry : Part 1 - HECElectrical safety code
Model code of safe practice for the petroleum industry : Part 16 - HECTank cleaning safety code
Model code of safe practice for the petroleum industry : Part 6 -Pipeline safety code
Specification for field gates and posts
Specification for domestic front entrance gates
Metal gates
Wooden gates
HEC
A,D,HEC,Hy,T,W
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PDS
AJXHEC,Hv/!\W PDS
AjXHECilvXW PDS
AJXffBC,Hv/i;W PDS
- 60 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Gates
Gates
Gates
BS4951
BS 5709
EMSD
1973(1995) Specification for builders' hardware: lock and latch furniture(doors)
A,D,H,HEC,T PDS
1979
1995
Specification for stiles, bridle gates and kissing gates A,D,HEC,Hy,T,W PDS
Code of practice for installation of electrically operated sliding A,Em,Hgates, sliding glass doors and rolling shutters
Laundry Machinery BS 6246: Part 1 1987(1993) Methods for the assessment of the effect of rotary washingmachines on textiles
Em
Laundry Machinery BS 6246: Part 2 1983 Methods for the assessment of the effect of extracting machines Emon textiles
Laundry Machinery BS 6246: Part 5 1991 (1996) Methods for the assessment of the effect of shaped garmentfinishing machinery on textiles
Laundry Machinery BS ISO 7772-3 1996
Laundry Machinery BS ISO 7772-4 1996
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
BS 4533
BS 4533: Part 2 1979
BS 4533: Section 1990102.1
BS 4533: Section 1990102.10
BS 4533: Section 1990102.17
BS 4533: Section 1990102.2
BS 4533: Section 1990102.4
BS 4533: Section 1990102.5
Assessment of industrial laundry machinery by its effect ontextiles. Flatwork ironing machines
Batch drying tumblers on testiles
Luminaires
Detail requirements
Specification for fixed general purpose luminaires
Specification for portable child-appealing luminaires
Specification for recessed luminaires
Specification for portable general purpose luminaires
Specification for floodlights
A, Em
Em
A,Em
PSS
TS
TS
TS
TS
TS
A,AAHK,HEC,Hy,T PDS,W
A,HEC,HyJ
A,HEC,Hy,T
Hy
Specification for luminaires for stage lighting, television, film Hyand photographic studios (outside and indoor)
A,HEC,Hy
Hy
A,HEC,Hy,T
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-61-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
Luminaires
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS4533: Section102.6
BS 4533: Section102.7
BS4533: Section102.8
BS4533: Section102.9
BS 4533: Section103.2
1990 Specification for luminaires with built-in transformers for A,HEC,Hyfilament lamps
1990 Specification for portable luminaires for garden use Hy
1990 Specification for handlamps Hy
1990 Specification for photo and film luminaires (non-professional) Hy
1986 Specification for photometric characteristics of luminaires for Hyhospitals and health care buildings
BS 5225: Part 1 1975(1985) Photometric data for luminaires - Photometric measurements AAHK
89/336/EEC
BS 1042
BS142
BS 1432
BS 1433
BS 1434
1989 EEC Electromagnetic compatibility (EMC) directive
Measurement of fluid flow in closed conduits
Electrical protection relays
AAHK
AAHK
AAHK
1987
1970
Specification for copper for electrical purposes: high AAHKconductivity copper rectangular conductors with drawn or rollededges
Specification for copper for electrical purposes. Rod and bar AAHK
1985 (1991) Specification for copper for electrical purposes: copper sections AAHKin bars, blanks and segments for commutators
BS 1486: Part 1 & 1959(1982) Lubricating nipples and adaptors for use on machinery and AJXEm2 vehicles
BS 1650
BS 1780
1971 Specification for capacitors for connection to power-frequency AAHK,! Isystems
1985(1992) Specification for bourdon tube pressure and vacuum gauges AAHK
PDS
PDS
PDS
PDS
PDS
TS
OS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-62-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS 1977
BS 2757
BS 2898
BS 2954
BS3816
BS 4575: Parti
BS 4575: Part 2
BS 4575: Part 3
BS 4608
BS 4662
BS 4683
BS 4683: Parti
BS 4683: Part 2
BS 4828
BS 4944
1976(1991)
1986(1994)
1970(1985)
1989(1995)
1979
1987
1988
1970
1970(1989)
1971
1971
1985(1991)
1994
Specification for high conductivity copper tubes for electricalpurposes
Method for determining the thermal classification of electricalinsulation
Specification for wrought aluminium and aluminium alloys forelectrical purposes. Bars, extruded round tube and sections
Cinematography. Production and presentation. Screens andscreen luminance. Recommendations for screen luminance forthe projection of 16mm film
Specification for epoxy resin casting systems used for electricalinsulating applications at power .frequencies
Fluid power transmission and control systems - guide forhydraulic equipment and systems
Fluid power transmission and control systems - code of practicefor pneumatic equipment and systems
Fluid power transmission and control systems - specification for2-pin reversible plugs and shaver socket-outlets
Specification for copper electrical purposes. Rolled sheet, stripand foil
Specification for boxes for the enclosure of electrical accessories
Specification for electrical apparatus for explosive atmospheres
Classification of Maximum Surface Temperature HEC
The construction and testing of flameproof enclosures ofelectrical apparatus
1985(1991) Guide for partial discharge measurements
Tractors, machinery for agriculture and forestry, powered lawn Band garden equipment. Symbols for operator controls and otherdisplays
A,AAHK,Em,HKT
AAHK,Em
AAHK
AAHK
AAHK
A,AAHK,Em
A,Em
A,Em
HKT
A,AAHK,Em,HEC,Hy,MTRC,T
AAHK
PDS
TS
PDS
PSS
PDS
PSS
PSS
PDS
PDS
PDS
PDS
OS
AAHK,HEC
AAHK
B
PSS
TS
PDS
- 6 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS 5207
BS 5304
BS 5345
1975(1980) Specification for sulphur hexafluoride for electrical equipment AAHK,HEC
1988
1989
Code of Practice for safety of machinery A,AAHK,D,Em,MTRC
Code of practice for selection, installation and maintenance of A,AAHK,D,Em,electrical apparatus for use in potentially explosive atmospheres MTRC(other than mining applications or explosive processing &manufacture)
General recommendation
1976( 1991) Method of test for enclosure pressurization systems onagricultural tractors and seli-propelled machines
Electrical apparatus for potentially explosive atmospheres
Electrical apparatus for potentially explosive atmospheres
Electrical apparatus for potentially explosive atmospheres.Encapsulation 'm'
Specification for intrinsically safe electrical system T
Insulating varnishes containing solvent
Electricity meters
BS 5685: Part 1 1979(1992) Specification for Class 0.5, 1 and 2 single-phase and polyphase, AAHKsingle rate and multi-rate watt-hour meters
BS 5345: Part 1
BS 5389
BS5501
BS 5501: Part 7
BS 5501: Part8(EN 50028)
BS 5501: Part9(IEC 60079-11EN 50037)
BS 5629
BS 5685
1989
1976
1977
1988
1982
BS 5685: Part 2 1986
BS 5685: Parts 2-5& 8
Specification for single-phase coin-operated prepayment flat rate AAHKand two-part tariff watt-hour meters of Class 2 and fixed chargecollectors of Class 2
PDS
PSS
PSS
A,AAHK,D,Em,MTRC
AAHK
AAHK,HEC
A,D,Em,HEC,Hy
A,D,Em,HEC,Hy
A,D,Em,HEC,Hy
W
AAHK
AAHK
AAHK
PSS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
Electricity meters A,Em PDS
- 6 4 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS5691
BS 5733
BS 5954
BS 5954: Part 3
BS 5992
BS 5992: Part 1
BS6018
BS 6037
BS6111
BS6129
BS 6290: Part 4
BS 6501: Parti
BS89
BS923
Guide for the determination of thermal endurance properties of AAHKelectrical insulating materials
1995 Specification for general requirements for electrical accessories AAHK
Dimensions of mechanical structures of the 482.6 mm (19 in) AAHKseries
1985 Specification for subracks and associated plug-in units AAHK
Electrical relays AAHK
1980 Specification for contact performance of electrical relays AAHK
1991 Method of test for accuracy and precision of mechanical AAHK
handpipettes of capacity 0.05 ml and above1990 Code of practice for permanently installed suspended access Hy
equipment
1981 (1988) Specification for reference coupler for the measurement of AAHKhearing aids using earphones coupled to the ear by means of earinserts
Code of practice for the selection and application of bellowsexpansion joints for use in pressure systems
AAHK
1987 (1993) Lead-acid stationary cells and batteries - Specification for lead- AAHKacid valve regulated sealed type
1991 Flexible metallic hose assemblies - Specification for corrugated AAHKhose assemblies
Direct acting indicating analogue electrical measuringinstruments and their accessories
Guide on high-voltage testing techniques
AAHK,HEC
AAHK
TS
PDS
PDS
PDS
PDS
PDS
TS
PSS
PDS
PSS
PDS
PDS
PDS
TS
-65-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BSEN 153 1996
BSEN 50014 1993
BSEN 50016 1996
BSEN 50017 1994
BSEN 50018 1995
BSEN 50019 1994
BSEN 50020 1995
BSEN 50081
BSEN 50081-2 1994
BS EN 50082
BSEN 50082-2 1995
BSEN 55011 1991
BSEN 55014
BSEN 55015 1993
Methods of measuring the energy consumption of electric mains AAHKoperated household refrigerators, frozen food storage cabinets,food freezers and their combinations, together with associatedcharacteristics
Electrical Apparatus for Potentially Explosive Atmospheres.General Requirements
Electrical Apparatus for Potentially Explosive Atmospheres.Pressurized Apparatus 'p'
Electrical Apparatus for Potentially Explosive Atmospheres.Flameproof Enclosure 'd'
Electrical Apparatus for Potentially Explosive Atmospheres.Flameproof Enclosure 'd'
Electrical Apparatus for Potentially Explosive Atmospheres.Increased Safety 'e'
Electrical Apparatus for Potentially Explosive Atmospheres.Intrinsic Safety V
Electromagnetic compatibility. Generic emission standard
Industrial environment AAHK
Electromagnetic compatibility. Generic immunity standard AAHK
Industrial environment AAHK
Specification for limits and methods of measurement of radio AAHKdisturbance characteristics of industrial, scientific and medical(ISM) radio-frequency equipment
Specification for limits and methods of measurement of radio A,A,AHK,Eminterference characteristics of household electrical appliances,portable tools and similar electrical apparatus
Limits and methods of measurement of radio interference AAHKcharacteristics of electrical lighting and similar equipment
TS
HEC
HEC
HEC
HEC
HEC
HEC
AAHK
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
TS
TS
-66-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS EN 55022 1995
BS EN 60061-2 1997
BS EN 60065 1998
BS EN 60073 1993
BS EN 60079-10 1996
BS EN 60079-14 1997
BS EN 60099-1 1994
BS EN 60155 1995
BS EN 60285
BS EN 60289
BS EN 60529
1995
1995
1992
BS EN 60529(IEC 1992529)
BS EN 60623
BS EN 60751
BS EN 60936
1996
1996
1993
Limits and methods of measurement of radio disturbance AAHK TScharacteristics of information technology equipment
Lampholders Em PDS
Safety requirements for mains operated electronic and relatedapparatus for household and similar general use
Basic and safety principles for man-machine interface, marking A,AAHK,Em,Hyand identification. Coding principles for indication devices andactuators
Electrical apparatus for explosive gas atmospheres -Classification of hazardous areas
Electrical installations in hazardous areas (other than mines)
Surge arrestors - Non-linear resistor type gap surge arrestors for AAHKa.c. systems
Glow-starters for fluorescent lamps
Alkaline secondary cells and batteries. Sealed nickel-cadmium AAHK PDScylindrical rechargeable single cells
Reactors AAHK PDS
Specification for classification of degrees of protection provided AAHK,Hy,MTRC OSby enclosures (IP code)
Specification for degree of protection by enclosures (IP Code) A,AAHK,D,Em,H, PSSHy,MTRC,T,W
A,AAHK,Em
A,AAHK,Em,Hy
A,Em
AAHK
AAHK
AAHK
PDS
PDS
OS
PDS
PDS
PDS
Vented nickel-cadmium prismatic rechargeable cells AAHK
Industrial platinum resistance thermometer sensors AAHK
Shipborne radar - Operational and performance requirements. AAHKMethods of test and required test results
PDS
PDS
TS
- 6 7 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS EN 60950 1992
BS EN 61010-1 1993
BS EN 61011
CAP 303
CAP 303
EMSD
HS(G)81
IEC 60027
IEC 60027-1
IEC 60027-3
IEC 60027-4
1993
1989
1992
1992
IEC60027-2B 1980
1989
1985
IEC 60050-121 1978
IEC 60050-131 1978
IEC 60050-131A 1982
Specification for safety of information technology equipment, AAHK,Emincluding electrical business equipment
Safety requirements for electrical equipment for measurement, A,Emcontrol and laboratory use
Electric fence energizers safety requirements for mains-operated Emelectric fence energizers
Radiation (Control of Radioactive Substances) Regulations
Radiation (Control of Irradiating Apparatus) Regulations
Code of Practice (Design, Manufacture and Installation of Aerial A,EmRopeway)
A code of safe practice - fairgrounds and amusement parks Em
Letter Symbols to Be Used in Electrical Technology HEC
General HEC
Second Supplement to Publication 60027-2 (1972) HEX
Logarithmic Quantities and Units HEC
Symbol for Quantities to Be Used for Rotating Electrical HECMachines
International Eiectrotechnical Vocabulary. Electromagnetisra HEC
International Eiectrotechnical Vocabulary. Electric and HECMagnetic Circuits
International Eiectrotechnical Vocabulary. First Supplement: HECElectric and Magnetic Circuits. : Polyphase Circuits andComponents
PDS
PDS
PDS
TR
TR
PSS
PSS
OS
OS
OS
OS
OS
OS
OS
OS
-68-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
IEC 60050-151 1978
IEC 60050-161 1990
IEC 60050-191 1990
IEC 60050-212 1990
IEC 60050-221 1990
IEC 60050-301 1983
IEC 60050-321 1986
IEC 60050-351 1975
IEC 60050-371 1984
IEC 60050-411 1996
IEC 60050-421 1990
IEC 60050-426 1990
IEC 60050-431 1980
IEC 60050-436 1990
IEC 60050-446 1983
International Electrotechnical Vocabulary. Electrical andMagnetic Devices
International Electrotechnical Vocabulary. : ElectromagneticCompatibility
International Electrotechnical Vocabulary. : Dependability andQuality of Service
International Electrotechnical Vocabulary.: Insulating Solids,Liquids and Gases
International Electrotechnical Vocabulary. : Magnetic Materialsand Components
International Electrotechnical Vocabulary. : General Terms onMeasurements in Electricity : Electrical Measuring Instruments :Electronic Measuring Instruments
International Electrotechnical Vocabulary.: InstrumentTransformers
International Electrotechnical Vocabulary. Automatic Control
International Electrotechnical Vocabulary.: Telecontrol
Rotating Machinery
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
OS
OS
OS
OS
OS
OS
OS
OS
HEC
HEC
International Electrotechnical Vocabulary.: Power Transformers HECand Reactors
International Electrotechnical Vocabulary.: Electrical Apparatus HECfor Explosive Atmospheres
International Electrotechnical Vocabulary. Transductors HEC
International Electrotechnical Vocabulary.: Power Capacitors HEC
International Electrotechnical Vocabulary. Electrical Relays HEC
OS
OS
OS
OS
OS
OS
OS
- 6 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
IEC 60050-448 1995
IEC 60050-471 1984
IEC 60050-481 1996
IEC 60050-486 1991
IEC 60050-551 1982
IEC 60050-601 1985
IEC 60050-602 1983
IEC 60050-603 1986
IEC 60050-604 1987
IEC 60050-605 1983
IEC 60050-691 1973
IEC 60050-731 1991
IEC 60050-826 1982
IEC 60050-845 1987
IEC 60216
International Electrotechnical Vocabulary : Power System HECProtection
International Electrotechnical Vocabulary.: Insulators HEC
Primary Cells and Batteries HEC
International Electrotechnical Vocabulary : Secondary Cells and HECBatteries
International Electrotechnical Vocabulary. Power Electronics HEC
International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - General
International Electrotechnical Vocabulary. Generation, HECTransmission and Distribution of Electricity - Generation
International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - Power SystemsPlanning and Management
International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - Operation
International Electrotechnical Vocabulary. Generation, HECTransmission and Distribution of Electricity - Substations
International Electrotechnical Vocabulary. Tariffs for Electricity HEC
International Electrotechnical Vocabulary -: Optical Fibre HECCommunication
International Electrotechnical Vocabulary. Electrical HECInstallations of Buildings
International Electrotechnical Vocabulary'. Lighting HEC
Guide for the Determination of Thermal Endurance Properties of HECElectrical Insulating Materials.
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
TS
- 70 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
IEC 60216-1
IEC 60216-2
IEC 60216-3-1
IEC 60216-3-2
IEC 60216-4-1
IEC 60216-5
IEC 60243-1
IEC 60243-2
IEC 60243-3
IEC 60305
IEC 60372
IEC 60381-1
IEC 60381-2
IEC 60383-1
1990
1990
1990
1993
1990
1990
1998
1990
1993
1995
1984
1982
1978
1993
General Guidelines for Ageing Procedures and Evaluation of HECTest Results
Choice of Test Criteria HEC
Instructions for Calculating Thermal Endurance Characteristics - HECSection 1: Calculations Using Mean Values of NormallyDistributed Complete Data
E Median Time to End-Point (Equal Test Groups)
Ageing Ovens : Single-Chamber Ovens
Guidelines for the Application of Thermal EnduranceCharacteristics
HEC
HEC
HEC
Electrical Strength of Insulating Materials - Test Methods : Tests HECAt Power Frequencies
Additional Requirements for Tests Using Direct Voltage HEC
Additional Requirements for Impulse Tests HEC
Insulators for Overhead Lines with A Nominal Voltage Above HEC1000 V - Ceramic Or Glass Insulator Units for AC. Systems -Characteristics of Insulator Units of the Cap and Pin Type
Locking Devices for Ball and Socket Couplings of StringInsulator Units - Dimensions and Tests
HEC
Analogue Signals for Process Control Systems.: Direct Current HECSignals
Direct Voltage Signals HEC
Insulators for Overhead Lines with A Nominal Voltage Above HEC1000 V : Ceramic Or Glass Insulator Units for AC. Systems -Definitions, Test Methods and Acceptance Criteria
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
OS
OS
TS
-71 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
IEC 60383-2
IEC 60413
IEC 60479-1
IEC 60479-2
IEC 60495
IEC 60628
IEC 60865-1
IEC 60865-2
IEC 60909-1
IEC 60909-2
IEC 60909-3
1993
1972
1994
1987
1993
1985
1993
1994
1991
1992
1995
IEC 68-2
ISO 1701
ISO 1701-0
1974
1984
Insulator Strings and Insulator Sets for AC. Systems - HECDefinitions, Test Methods and Acceptance Criteria
Expression of the Performance of Electrical and Electronic HECMeasuring Equipment
Effects of Current on Human Beings and Livestock : General HECAspects
Currents of Short Duration HEC
Single Sideband Power-Line Carrier Terminals HEC
Gassing of Insulating Liquids Under Electrical Stress and HECIonization
Short-Circuit Currents - Calculation of Effects : Definitions and HECCalculation Methods
Short-Circuit Currents - Calculation of Effects : Examples ofCalculation
HEC
Short-Circuit Current Calculation in Three-Phase AC. Systems : HECFactors for the Calculation of Short-Circuit Currents in Three-Phase AC. Systems According to IEC 909
Electrical Equipment - Data for Short-Circuit CurrentCalculations in Accordance with IEC 909 (1988)
HEC
Short-Circuit Current Calculation in Three-Phase AC. Systems : HECCurrents During Two Separate Simultaneous Single PhaseLine-To-Earth Short Circuits and Partial Short-Circuit CurrentsFlowing Through Earth
HV tester
A swivelling table - Ed. 3
HEC
HEC
Test conditions for milling machines with table of variable HECheight, with horizontal of vertical spindle ; General introduction
TS
PDS
OS
OS
PDS
PSS
OS
O
OS
OS
OS
PDS
OS
TS
-72-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
ISO 1708
ISO 1984
ISO 1984-0
ISO 1985
ISO 1986
ISO 229
ISO 230-1
ISO 230-2
ISO 2407
ISO 2433
ISO 2772-1
ISO 2772-2
ISO 2773-1
ISO 2773-2
1989
1982
1984
1985
1985
1973
1986
1988
1984
1984
1973
1974
1973
1973
Acceptance conditions for general purpose parallel lathes -Testing of the accuracy
HEC
Acceptance conditions for milling machines with table of fixed HECheight with horizontal or vertical spindle - Testing of accuracy
Test conditions for milling machines with table of fixed height HECwith horizontal or vertical spindle - Part 0 : General introduction
Acceptance conditions for surface grinding machines with HECvertical grinding wheel spindle and reciprocating table - Testingof accuracy
Acceptance conditions for surface grinding machines with HEChorizontal grinding wheel spindle and reciprocating table -Testing of accuracy
Machine tools - Speeds and feeds HEC
Acceptance code for machine tools - Part 1 : Geometric accuracy HECof machines operating under no-load or finishing conditions
Acceptance code for machine tools - Part 2 : Determination of HECaccuracy and repeatability of positioning of numericallycontrolled machine tools
Acceptance conditions for internal cylindrical grinding machines HECwith horizontal spindle - Testing of accuracy
Acceptance conditions for external cylindrical grinding HECmachines with a movable table - Testing of accuracy
Test conditions for box type vertical drilling machines - Testing HECof the accuracy : Geometrical tests
Test conditions for box type vertical drilling machines - Testing HECof the accuracy : Practical tests
Test conditions for pillar type vertical drilling machines - Testing HECof the accuracy : Geometrical tests
Test conditions for pillar type vertical drilling machines - Testing HECof the accuracy : Practical test
TS
TS
TS
TS
TS
PDS
TS
TS
TS
TS
TS
TS
TS
TS
-73-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
ISO 3070-1
ISO 3070-2
ISO 3070-3
ISO 3190
ISO 3655
ISO 3686
ISO 3875
ISO 4703
ISO 5734
ISO 6155-1
ISO 6155-2
ISO 666
ISO 8636-1
1987
1978
1982
1975
1986
1976
1990
1984
1986
1981
1986
1975
1987
Acceptance conditions for boring and milling machines with HEChorizontal spindle - Testing of the accuracy : Table-typemachines
Test conditions for boring and milling machines with horizontalspindle - Testing of the accuracy : Floor type machines
Acceptance conditions for boring and milling machines withhorizontal spindle - Testing of the accuracy : Planer typemachines with movable column
Test conditions for turret and single spindle co-ordinate drillingmachines with vertical spindle - Testing of accuracy
Acceptance conditions for vertical turning and boring lathes withone or two columns and a single fixed or movable table - Generalintroduction and testing of the accuracy
Test conditions for turret and single spindle co-ordinate drilling HECand boring machines with table of fixed height with verticalspindle - High accuracy machines - Testing of the accuracy
Acceptance conditions for external cylindrical centrelessgrinding machines - Testing of the accuracy
Acceptance conditions for surface grinding machines with twocolumns - Machines for grinding slideways - Testing of accuracy
Acceptance conditions of mechanical dividing heads for machinetools - Testing of accuracy
Acceptance conditions for horizontal spindle capstan, turret andsingle spindle automatic lathes - Testing of the accuracy - Part I :Machinable bar diameters greater than 25mm
Acceptance conditions for horizontal spindle capstan, turret and HECsingle spindle automatic lathes - Testing of the accuracy - Part 2 :Machinable bar diameters 25mm or less and chuck diameter upto 160mm
Machine tools - Mounting of plain grinding wheels by means of HEChub flanges
Acceptance conditions for piano-milling machines - Testing of HEC*the accuracy - Part 1 : Portal-type machines
TS
HEC
HEC
HEC
HEC
TS
TS
TS
TS
TS
HEC
HEC
HEC
HEC
TS
TS
TS
TS
TS
PDS
TS
-74-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
ISO 8636-2
ISO 8956
PD 6484
UKBRE
UKHSE
UKHSE1333
UKHSE COP 16
ANSI/IEEE 95
BS 173: Part 1
BS 2048
BS 2769
BS 2769: Part 2 :Section2.il
BS 4999
BS 4999: Part 0
BS 4999: Part 102
BS 4999: Part 103
1988
1986
1979
1977
1992
1984
1987
1987
1987
Acceptance conditions for piano-milling machines - Testing of HECthe accuracy - Part 2 : Gantry-type machines
Acceptance conditions for copying attachments, integral or HECotherwise, for lathes - Testing of the accuracy
1979 (1990) Commentary on corrosion at bimetallic contacts and its AAHK,MTRCalleviation
Reducing the risk of pest infestation: design recommendations AAHKand literature review
Guidance note on threshold limit values
Standards for ionising radiation
AAHK
AAHK
The protection of persons against ionising radiation arising from AAHKany work activity
Insulation test of large AC rotating machine HEC
Electric traction (rail and road vehicles) - Specification for AAHKrotating electrical machines
Specification for dimensions of fractional horse-power motors AAHK
Hand-held electric motor-operated tools
Specification for concrete vibrators
General requirements for rotating electrical machines
H
H
TS
TS
OS
PSS
OS
PDS
PSS
TS
PDS
PDS
PDS
PDS
A,AAHK,D,Em,H, PDSHEC,MTRC,W
General requirements for rotating electrical machines - general A,D.,Eni,H,HEC,Wintroduction and information on other Parts
Methods for determining losses and efficiency from tests(excluding machines for traction vehicles)
Specification for symbols
A,D,Em,H,HEC,W TS
A,D,Em,H,HEC OS
- 7 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
BS 4999: Part 105 1988
BS 4999: Part 108 1987
BS4999: Part 111 1987
BS 4999: Part 115 1992
BS 4999: Part 140 1987
BS 4999: Part 141 1987
BS 4999: Part 142 1987
BS 4999: Part 143 1987
BS 4999: Part 144 1987
BS 4999: Part 145 1987
BS 4999: Part 147 1988
BS 5000
BS 5000 : Part 16 1985
BS 5000: Part 17 1986
BS 5000 : Part 25 1986
BS 5000 : Part 40 1989
Classification for degrees of protection provided by enclosuresfor rotating machinery
Specification for terminal markings and direction of rotation
Specification for built-in thermal protection for electric motorsrated at 660 volts a.c. and below
Impulse voltage withstand levels of rotating ax. machines withform-wound stator coils
Specification for voltage regulation and parallel operation of a,c.synchronous generators
Specification for standard dimensions
Specification for mechanical performance: vibration
Specification for tests
Specification for the insulation of bars and coils of high voltagemachines, including test methods
Specification for winding terminations
Specification for dimensions of brushes and brush-holders forelectrical machinery
Rotating electrical machines of particular type or for particularapplications
Rotating electrical machines with type of protection *Nf
Machines with flameproof enclosures
D.C. mill auxiliary motors
Motors for driving power station auxiliaries
A,D,Em,H,HEC
A,D,Em,H,HEC,W
A,AAHK,D,Em,H,HEC,W
HEC
HEC
A,AAHK,D,Em,H,HEC
A,AAHK,D,Em,H,HEC,W
A,D,Em,H,HEC,W
A,D,Em,H,HEC,W
A,D,Em,H,HEC
HEC
A,AAHK,D,Em,H,HEC,W
HEC
HEC
HEC
HEC
OS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 7 6 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
BS 5000 : Part 50 1988
BS 5000 : Part 60 1988
BS 5000: Index 1981
Dimensions for oil burner motors
Stepping motors
General introduction and index
HEC
HEC
HEC
PDS
PDS
OS
BS 5000: Part 10 1978(1989) General purpose induction motors
BS 5000: Part 11 1973(1989) Small-power electric motors and generators
A,AAHKD,Em, PDSHEC,W
A,AAHK,D,Em PDS
BS 5000: Part 15 1985 Machines with type of protection 'e' (increased safety) HEC PDS
BS 5000: Part 3 1980(1985) Generators to be driven by reciprocating internal combustionengines
BS 5000: Part 99 1973(1986) Machines for miscellaneous application
A,D,Em,H,HEC PDS
A,AAHK9D,Em,H, PDSHEC
BS587
BS EN 60034
1957( 1984) Specification. Motor starters and controllers
BS EN 60034-1 1995
BS EN 60034-12 1996
BS EN 60034-6 1994
BS EN 60034-7 1993
BS EN 60034-9 1994
Rotating electrical machines
Rating and performance
A,D5Em,MTRC
AAHK
PDS
PDS
A,AAHK,D,Em,H, PDSW
Starting performance of single-speed three-phase cage induction A,D,Em9Hmotors for voltages up to and including 600V, 50Hz
PDS
IEC 0034-01 1996
Methods of cooling (IC Code)
Classification of types of constructions and mountingarrangements (IM Code)
noise limits
Rating and Performance
A,AAHK,D,Em,H, PSSW
A,D,Em,H,MTRC OS
A,AAHK,D5Em,Ep, PDSH,MTRC
HEC PDS
- 77-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
IEC 0034-07 1992
IEC 60034
IEC 60034-03 1988
IEC 60034-04 1985
IEC 60034-05 1991
IEC 60034-06 1991
IEC 60034-09 1997
IEC 60034-10 1975
IEC 60034-11 1978
IEC 60034-11-2 1984
IEC 60034-11-3 1984
IEC 60034-13 1980
IEC 60034-14 1996
Motorised Drives & IEC 60034-15Machinery
1995
Motorised Drives & IEC 60034-16-1 1991Machinery
Classification of Types of Construction and MountingArrangements (IM Code)
Rotating Electrical Machines
Specific Requirements for Turbine-Type Synchronous Machines
Methods for Determining Synchronous Machine QuantitiesFrom Tests
Classification of Degrees of Protection Provided by Enclosuresfor Rotation Electrical Machinery (IP Code)
Methods of Cooling (IC Code)
Noise Limits
Conventions for Description of Synchronous Machines
Build-in Thermal Protection.: Rules for Protection of RotatingElectrical Machines
Thermal Detectors and Control Used in Thermal ProtectionSystems
General Rules for Thermal Protectors Used in ThermalProtection Systems
Specification for Mill Auxiliary Motors
Mechanical Vibration of Certain Machines with Shaft Heights56mm and Higher - Measurement, Evaluation and Limits ofVibration
Impulse Voltage Withstand Levels of Rotating AC. Machineswith Form-Wound Stator Coils
Excitation Systems for Synchronous Machines : Definitions
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
OS
PDS
PDS
TS
PDS
PSS
PDS
OS
PSS
PDS
PDS
PDS
TS
PDS
PDS
- 7 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
HEC
HEC
HEC
HEC
HEC
HEC
HEC
TYP
PDS
PDS
PSS
PSS
TS
TS
TS
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &,MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives 8cMachinery
IEC 60034-16-2
IEC 60034-16-3
IEC 60034-17
IEC 60034-18-1
IEC 60034-18-21
IEC 60034-18-22
IEC 60034-18-31
IEC 60034-18-32
IEC 60034-18-33
IEC 60034-19
IEC 60034-22
IEC 60072-1
IEC 60072-2
IEC 60072-3
1991
1996
1996
1992
1992
1996
1992
1995
1995
1995
1996
1991
1990
1994
Excitation Systems for Synchronous Machines : Models forPower System Studies
Excitation Systems for Synchronous Machines : DynamicPerformance
Cage Induction Motors When Fed From Converters -Application Guide
Functional Evaluation of Insulation Systems : GeneralGuidelines
Test Procedures for Wire-Wound Windings - ThermalEvaluation and Classification
Test Procedures for Wire-Wound Windings - Classification ofChanges and Insulation Component Substitutions
Test Procedures for Form-Wound Windings - ThermalEvaluation and Classification of Insulation Systems Used inMachines Up to and Including 50mva and 15kV
Test Procedures for Form-Wound Windings - ElectricalEvaluation of Insulation System Used in Machines Up to andIncluding 50mva and 15kV
Test Procedures for Form-Wound Windings - ElectricalEvaluation of Insulation System Used in Machines Up to andIncluding 50mva and 15kV
Specific Test Methods for DC. Machines on Conventional and HECRectifier-Fed Supplies
AC Generators for Reciprocating Internal Combustion (RIC) HECEngine Driven Generating Sets
Dimensions and Output Series for Rotating Electrical Machines: HECFrame Numbers 56 to 400 and Flange Numbers 55 to 1080
Frame Numbers 355 to 1000 and Flange Numbers 1180 to 2360 HEC
HEC
HEC
Small Built-in Motors - Flange Numbers BflO to Bf50 HEC
TS
TS
TS
PDS
PDS
PDS
PDS
-79-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Motorised Drives &Machinery
Motorised Drives &Machinery
Motorised Drives &Machinery
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Oil BurningEquipment
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
IEC 60136
ISO 1940-1
ISO 6545
BS 2869: Part 2
BS 799: Part 2
BS 799: Part 3
BS 799: Part 4
BS 799: Part 5
BS 799: Part 7
BS 799: Part 8
CAP 123
AS 1210
ASME
ASME
ASME
1986
1986
1992
1988
1991
1981
1991
1987
1988
1988
1977
Dimensions of Brushes and Brush-Holders for Electrical HECMachinery
Mechanical vibration - Balance quality requirements of rigid HECrotors : Determination of permissible residual unbalance
Acceptance conditions for gear hobbling machines - Testing of HECthe accuracy
Specification for fuel oil for agricultural and industrial engines HECand burners (classes A2, Cl, C2, D, E, F, G and H)
Specification for vaporising burners Em
Automatic and semi-automatic atomising burners up to 36 litres Emper hour
Specification for atomising burners (other than rnonobloc type) Emtogether with associated equipment for single burner and multiburner installations
Specification for oil storage tanks Em
Specification for dimensions of atomising oil burner pumps with Emrotating shaft and external drive
Specification for connecting dimensions between atomising oil Emburners and heat generators
Building (Oil storage Installations) Regulation
SAA unfired pressure vessels code A,Em,W
ASME Boiler and pressure vessel code : Section IV : Heating HECboilers
ASME Boiler and pressure vessel code : Section II Part A : HECFerrous material specifications
ASME Boiler and pressure vessel code : Section VII: HECRecommended guidelines for the care of power boilers
PDS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TR
PDS
PDS
PDS
PSS
-80-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
A,Em,W
A,Em,W
HEC
A,AAHK,Em,W
A,AAHK,Em,H,HEC,W
HEC
TYPI
PDS
PDS
PDS
PDS
PDS
TS
PDS
PSS
PSS
PDS
PDS
PSS
PDS
PDS
PSS
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME Section-VIII-DIV.l
ASME Section-VIII-DIV.2
BS 1113
BS5169
BS 5500
BS806
1980
1989
1992
1992
1997
1993
ASME Boiler and pressure vessel code : Section II Part B :Non-ferrous material specifications
ASME Boiler and pressure vessel code : Section II Part D :Materials - Property
ASME Boiler and pressure vessel code : Section II Part C :Specifications for welding rods, electrodes and filler metals
ASME Boiler and pressure vessel code : Section I - Powerboilers
ASME Boiler and pressure vessel code : Section VIII Division I:Pressure vessels
ASME Boiler and pressure vessel code : Section V : Non-destructive examination
ASME Boiler and pressure vessel code : Section VIII Division2 : Pressure vessels - Alternative rules
ASME Boiler and pressure vessel code : Section IX : Weldingand brazing qualifications
ASME Boiler and pressure vessel code : Section VI:Recommended rules for the care and operation of heating boilers
Boiler and pressure vessel code
Boiler and pressure vessel code
Specification for design and manufacture of water-tube steamgenerating plant (including superheaters, reheaters and steel tubeeconomizers)
Specification for fusion welded steel air receivers
Specification for unfired fusion welded pressure vessels
Specification for design and construction of ferrous pipinginstallations for and in connection with land boilers
-81 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Pressure Vessels
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
CAP 56
CAP 56
CAP 56
CAP 56
CFR49
IP
JIS Handbook
JIS Handbook
JIS Handbook
JIS Handbook
JIS Handbook
BS159
BS 4293
BS 5424
BS 5424: Part 2
BS 5486
1984
Boilers and Pressure Vessels Ordinance
Boilers and Pressure Vessels Regulations
Boilers and Pressure Vessels (forms) Order
Boilers and Pressure Vessels (Exemption) (Consolidation) Order
Code of federal regulations 49 Parts 178 to 199 transportation A,Em
2nd Edition Model code of safe practice for the petroleum industry : Pressure HECvessel systems examination
Ferrous materials & metallurgy II
Ferrous materials 8c metallurgy I
Piping
Welding
Non-ferrous materials & metallurgy
HEC
HEC
HEC
HEC
HEC
TR
TR
TR
TR
PSS
TS
OS
OS
OS
OS
OS
1992 Specification for high-voltage busbars and busbar connections A,AAHK,D,Em,W PDS
1983(1993) Specification for residual current-operated circuit-breakers
Specification for controlgear for voltages up to and including1000 V ax. and 1200 V dx.
1987( 1993) Specification for semiconductor contactors (solid statecontactors)
Low-voltage switchgear and controlgear assemblies
A,AAHK,D,Em,H, PDSHEC
AAHK
A,D,Em,W
AAHK, HEC
PDS
PDS
PDS
-82-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
BS 5486: Part 1 1990
BS 5486: Part 11 1989
BS 5486: Part 12 1989
BS 5486: Part 13 1991
BS 5486: Part 2 1988
BS EN 60129 1994
BS EN 60298 1996
BS EN 60439
BS EN 60439-1 1994
BS EN 60439-2 1993
BS EN 60898 1991
BS EN 60947
BS EN 60947-1 1992
BS EN 60947-2 1996
BS EN 60947-3 1992
BS EN 60947-4
Requirements for type-tested and partially type-tested assemblies HEQHy
Specification for particular requirements of fiiseboards A,D,Em,HEC,MTRQW
PDS
PDS
Specification for particular requirements of type-tested miniature A,AAHK,D,Em,H, PDScircuit-breaker boards MTRC,W
Specification for particular requirements of consumer units A,D,Em,H,MTRC PDS
Particular requirements for busbar trunking systems (busways) HEC,Hy
Specification for alternating current disconnectors and earthingswitches
A.C. metal-enclosed switchgear and controlgear for ratedvoltages above 1 kV and to and including 52 kV
Specification for low-voltage switchgear and controlgearassemblies
Specification for type-tested and partially type-tested assemblies
AAHK
AAHK
PDS
PDS
PDS
A,D,Em,H,MTRC, PDSW
A,AAHK,D,Em,H, PDSHEC
Particular requirements for busbar trunking systems (busways) A,D,Em,H,HEC PDS
Specification for circuit-breakers for overcurrent protection forhousehold and similar installations
Specification for low-voltage switchgear and controlgear
General rules
Circuit breakers
Switches, disconnectors, switch-disconnectors and fuse-combination units
Contactors and motor-starters
A,AAHK,D,Em,H,T PDS
A,AAHK,D,Em,MTRC
A,AAHK,D,Em,H
AAHK,H
AAHK,H
AAHK,H
PDS
PDS
PDS
PDS
PDS
-83-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Switchgear
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
BS EN 60947-4-1 1992
BS EN 60947-5-1 1992
BS EN 61008
BS EN 61008-1 1995
BS EN 61008-2-1 1995
BS EN 61009
CAP 406
IEC 60050-441 1984
BS171 1970
BS 171: Par t i 1978
BS 171: Part 2 1978
Electromechanical contactors and motor-starters
Control circuit devices and switching elements -Electromechanical control circuit devices
AAHK,H
AAHK
Residual current operated circuit-breakers without integral Emovercurrent protection for household and similar uses (RCCBs)
General rules 11 EC
Specification for Residual Current Operated Circuit-Breakers IIECWithout Integral Over current Protection for Household andSimilar Uses (RCCBs) Section 2-1: Applicability of the GeneralRules to RCCBs Functionally Independent of Line Voltage
Specification for residual current operated circuit breakers with Emintegral overcurrent protection for household and similar uses(RCCBs)
Electricity Supply Regulations Sections 8 and 27. ElectricitySupply (Special Areas) Regulations Section 9
International Electrotechnical Vocabulary. Switchgear,Controlgear and Fuses
Power transformers
General
Specification for temperature rise requirements
BS 171: Part 3 1987(1993) Specification for insulation levels and dielectric tests
BS 171: Part 4 1978(1993) Specification for tappings and connections
BS 171: Part 5 1978(1993) Specification for ability to withstand short circuit
PDS
PDS
PDS
PDS
PDS
PDS
I1EC
A,AAHKD.Ern»MTRCW
!XEm
D,Em
AJXfmW
AJXBtn
A.DJmW
TR
OS
PDS
PDS
PDS
TS
PDS
PDS
-K4-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &,MECHANICAL
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
Transformers
BS3535
BS3941
BS 5953
BS6184
BS 6436
BS 7626(IEC60185)
BS 7806
BS EN 60551
1990BS 3535: Part1(IEC 60742)
BS 3535: Part 2 1990
Isolating transformers and safety isolating transformers
General requirements
Specification for transformers for reduced system voltage
1975(1992) Specification for voltage transformers
1980 (1993) Guide on power transformers
1981(1992) Method for measuring partial discharges in instrumenttransformers
1984( 1993) Specification for ground mounted distribution transformers for A,D,Em,MTRCcable box or unit substation connection
1993
1995
BS EN 60076-1 1997
BS EN 60076-2 1997
1993
BS IEC 60076-8 1997
CAP 406
UPS & Emergency BS 5514Generators
Specification for current transformers
Dry-type power transformers
Power transformers - general
Power transformers - specification for temperature riserequirements
Determination of transformer and reactor sound levels
Power transformers - application guide
Electricity supply regulation Sections 9, 10 & 29
Reciprocating internal combustion engines: performance
A,D,Em,MTRC
A,D,Em
A,D,Em,HEC
A,AAHK,D,Em,MTRQW
MTRC
AAHK
A,D,Em,MTRC
A,AAHK5D,Em,MTRC,W
AAHK
A,D,Em,W
A,D,Em,W
AAHK
A,D,Em
PDS
PDS
PDS
PDS
PSS
TS
PDS
PDS
PDS
PDS
PDS
TS
OS
TR
A,AAHK,Em,H,W PDS
-85-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
UPS & EmergencyGenerators
UPS & EmergencyGenerators
UPS & EmergencyGenerators
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
IP
ISO 2953
ISO 7475
BS 1414
BS 1415
BS 4062:
BS 4062:
BS 4082
BS5I50
BS5151
BS5152
BS5153
BS5154
BS5155
1998 Model code of safe practice for the petroleum industry :Guidelines for the control of hazards arising from staticelectricity
1985 Balancing machines - Description and evaluation
1984 Balancing machines - Enclosures and other safety measures
1975 (1991) Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and alliedindustries
Mixing valves
1982 Valves for hydraulic fluid power systems - methods fordetermining pressure differential/flow characteristics
1990 Valves for hydraulic fluid power systems - methods fordetermining performance
Specification for external dimensions for vertical in-linecentrifugal pumps
HEC PSS
1990 Specification for cast iron gate valves
1974( 1991) Specification for cast iron gate (parallel slide) valves for generalpurposes
1974( 1991) Specification for cast iron globe and globe stop and check valvesfor general purposes
1974(1991) Specification for cast iron check valves for general purposes
1991 Specification for copper alloy globe, globe stop and check, checkand gate valves
1984(1991) Specification for buttery valves
HEC
HEC
AAHK
AAHK,HEC,W
A,D,Em,MTRC
A,D,Em,MTRC
AJD,Em
A,AAHK,D,Em,H,HEC,Hy,MTRC,T,W
A,D,Em,H,T
A,AAHK,D,Em,H,MTRCJ,W
A,AAHK,D,Em,H,HECHy,MTRCXW
A,D,Em,H,I IRC,Hy,MTRC,T,W
A,AAHK,D,Em,MTRCXW
OS
PSS
PDS
PDS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 86 -
Construction Standards Used in Hong Kong (December 1998)
GROUP
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
SUBGROUP
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
NUMBER
BS5156
BS5157
BS5158
BS5159
BS5160
BS5163
BS 5257
BS5316
BS5351
BS 5352
BS599
BS6316
BS 6755
BS 6755: Part 1
BS 6755: Part 2
YEAR
1985(1990)
1989
1989
1974(1991)
1989
1986(1991)
1975
1986(1991)
1981(1991)
1966
1992
1986(1991)
1987
TITLE
Specification for diaphragm valves
Specification for steel gate (parallel side) valves
Specification for cast iron plug valves
Specification for cast iron and carbon steel ball valves for generalpurposes
Specification for steel globe valves, globe stop and check valveand lift type check valves
Specification for predominantly key-operated cast iron gatevalves for waterworks purposes
Specification for horizontal end-suction centrifugal pumps (16bar)
Specification for acceptance tests for centrifugal, mixed flow andaxial pumps
Specification for steel ball valves for the petroleum,petrochemical and allied industries
Specification for steel wedge gate, globe and check valves 50mmand smaller for the petroleum, petrochemical and alliedindustries
Methods of testing pumps
Code of practice for test pumping of water wells
Testing of valves
Specification for production pressure testing requirements
Specification for fire type-testing requirements
USERORGANISATION
A,D,Em,H,MTRC,T
,wA,D,Em
A,D,Em,W
A,D,Em,H,MTRC,T
,wA,D9Em,W
A,AAHK,D,H,HEC,Hy,MTRC,T,W
A,D,Em,MTRC,T
A,AAHK,D,Em,MTRC,T,W
AAHK
AAHK
A,D,Em,MTRC
H
AAHK
AAHK
AAHK
TYPE
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
TS
TS
TS
TS
TS
-87-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Valves & Pumps
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS 7350
BS EN 558
BS EN 558-1
BS EN 558-2
BS 1442
BS 2848(IEC60684-3-300)
BS31
BS3858
BS 4066: Part 1
BS4109
BS 4393
BS 4568
BS 4568: Part 1
BS 4568: Part 2
BS 4579
1990
1996
1996
Specification for double regulating globe valves and flow AAHKmeasurement devices for heating and chilled water systems
Industrial valves. Face-to-face and centre-to-face dimensions of AAHKmetal valves for use in flanged pipe systems
PN-designated valves AAHK
Class-designated valves AAHK
BS EN 60335-2- 199151
Stationary circulation pumps for heating and service installations A,D,Em
1969(1986) Specification for galvanized mild steel wire for armouring cables AAHK
PDS
PDS
PDS
PDS
PDS
PDS
1973 Specification for flexible insulating sleeving for electrical A,D,Em PDSpurposes
1940( 1988) Specification. Steel conduit and fittings for electrical wiring A,D,Em,MTRC, W PDS
1992 Specification for binding and identification sleeves for use on A,AAHK,D,Em,W PSSelectric cables and wires
1980 (1995) Tests on electric cables under fire conditions - Method of test on AAHKa single vertical insulated wire or cable
1970 (1991) Specification for copper for electrical purposes. Wire for general H.KTelectrical purposes and for insulated cables and flexible cords
TS
PDS
PDS1991 Specification for solderable tin or tin-lead coated wires for AAHKcomponent terminations
Specification for steel conduit and fittings with metric threads of AAHK,Em,MTRC PDSISO form for electrical installations
1970 (1993) Steel conduits, bends and couplers
1970 (1988) Fittings and components
AAHK,HEC,Hy, PDSMTRC
AAMKJiECHy, PDSMTRC
Specification for performance of mechanical and compression AAHKjoints in electric cable and wire connectors
PDS
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS 4607
BS 4678
BS 4678: Part 1
BS 4678: Part 2
BS 4678: Part 4
BS 5308
BS 5467
BS 6004(IEC60227)
BS 6007
BS 6099
BS 6099: Part 1
BS 6099: Part 2:Section 2.2
BS6121
BS 6121: Part 1-2
BS 6121: Part 3
19711
1973 i
1982
1995
1993
1981
1982i
1973
1989
1990
Non-metallic conduits and fittings for electrical installations AAHK,Em
Cable trunking
PDS
Cable Trunking Made of Insulating Material
Instrumentation cables
Specification for cables with thermosetting insulation forelectricity supply for rated voltages of up to and including600/1000 V and up to and including 1900/3300 V
AAHK,Em
AAHK,HEC
AAHK,HEC
HEC
AAHK
PDS
PDS
PDS
PDS
PDS
A,AAHK,D,Em,H PDS
A,AAHK,D,Em,H, PDSHEC,MTRC,T
Specification for PVC-insulated cables (non-armoured) forelectric power and lighting
Specification for rubber-insulated cables for electric power and A,AAHKD,Em,T,W PDSlighting
Conduits for electrical installations A,D,Em,H,MTRC PDS
Specification of general requirements
Mechanical cable glands
A,D,Em,H
D,Em,H
AAHK,HEC,Hy
Mechanical cable glands - specifications for metallic glands and A,D,Em,Hpolymer glands
Mechanical cable glands - specification for special corrosion A,D,Em,Hresistant glands
PDS
PDS
PDS
PDS
PDS
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS6141
BS 6207
BS6231
BS 6346
BS 6387
BS 6425
BS 6425: Part 1
BS 6425: Part 2
BS 6469
BS 6480(IEC60055-1-2)
BS 6500(IEC60227,60245)
BS 6558
BS 6622(IEC60502)
BS 6724
1991
1990
1997
1994
1990
1993
1988
1994
1985
1991
1997
Specification for insulated cables and flexible cords for use inhigh temperature zones
Mineral insulated cables with a rated voltage not exceeding 750V
Specification for PVC-insulated cable for switchgear andcontrolgear wiring
Specification for PVC-insulated cables for electricity supply
Specification for performance requirements for cables requiredto maintain circuit integrity under fire conditions
Test on gases evolved during the combustion of materials fromcables
A,D,Em
A,AAHK,D,Em,MTRC,W
A,AAHK,D,Em,H,HEC,MTRC,W
A,AAHK,D,Em,H,HECMTRCXW
A,AAHK,D,Em,HEC,MTRC,W
AAHK
Method for determination of amount of halogen acid gas evolved AAHKduring combustion of polymeric materials taken from cables
Determination of degree of acidity (corrosi vity) of gases by AAHKmeasuring pH and conductivity
Insulating and sheathing materials of electric cables AAHK
Specification for impregnated paper - insulated lead or lead alloy A,D,Em,Wsheathed electric cables of rated voltages up to and including33000 V
PDS
PDS
PDS
PDS
PDS
TS
TS
TS
PDS
PDS
Specification for insulated flexible cords and cables
Optical fibres and cables
A,AAHK,D,Em,MTRC
PDS
A,Em,RHEC,Hy,T PDS
1991(1996) Specification for cables with extruded cross-linked polyethylene A.AAHK,D,Em PDSor ethylene propylene rubber insulation for rated voltages from3800/6600 V up to 19000/33000 V
Specification for armoured cables for electricity supply having A,AAHK,D,Em, PDStherrnosetting insulation with low emission of smoke and HECcorrosive gases when affected by fire
- 9 0 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
BS 6746 1990
BS6899 1991
BS6910
BS 6910: Parti 1988
BS 6910: Part 2
BS7211
BS 731: Parti
BS 7622
BS 7622: Part 1
BS 7622: Part 2
BS 7629
BS 7629: Part 1
BS 7629: Part 2
BS7671
1989
1994
Specification for PVC insulation and sheath of electric cables AAHK
Specification for rubber insulation and sheath of electric cables AAHK
Cold pour resin compound and heat-shrink cable joints in thevoltage range up to 1000 V a.c. and 1500 V d.c.
Specification for materials
Code of practice for on-site installation
Specification for thermosetting insulated cables (non-armoured)for electric power and lighting with low emission of smoke andcorrosive gases when affected by fire
1952(1993) Flexible steel conduct for cable protection and flexible steeltubing to enclose flexible drives : Flexible steel conduct &adaptors for the protection of electric cable
Measurement of smoke density of electric cables burning underdefined conditions
1993 Test apparatus
1993 Test procedure and requirements
Specification for 300/500 V fire resistant electric cables havinglow emission of smoke and corrosive gases when affected by fire
1997 Multicore cables
1997 Multipair cables
1992 Requirements for electrical installations. IEE Wiring
Regulations. Sixteenth edition
PDS
PDS
AAHK
AAHK
AAHK
A,AAHK,D9Em
A,AAHK,D,Em,HEQMTRC
AAHK
AAHK
AAHK
AAHK,Em,H
Em,H
Em,H
AAHK,Em
PDS
PDS
PSS
PDS
PDS
TS
TS
TS
PDS
PDS
PDS
PSS
- 9 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
Wiring & Cables BS 7846
Wiring & Cables BS 7889
Wiring & Cables BS91
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
Wiring & Cables
1996
1997
Specification for 600/1000 V armoured fire-resistant electric Hcables having low emission of smoke and corrosive gases whenaffected by fire
Specification for 600/1000 V single-core unarmoured electriccables having thermosetting insulation
1973 (1988) Specification for electric cable soldering sockets
BS EN 187000 1994
BS EN 50086 1994
BS EN 50086-1 1994
BS EN 50086-2 1996
BS EN 50086-2-1 1996
BS EN 60305 1996
BS EN 60383-2 1995
BS EN 60423
CAP 406
CAP 406
CAP 406
1995
General specification for optical fibre cables
H
AAHK
AAHK
Specification for conduit systems for electrical installations A,Em,HEC
General requirements
Particular requirements
Rigid conduit system
A,Em,H,HEC
H,HEC
Insulators for overhead lines with a nominal voltage above 1 kV. AAHKCeramic or glass insulator units for a.c. systems. Characteristicsof insulator units of the cap and pin type
Insulators for overhead lines with a nominal voltage above 1000 AAHKV - Insulator strings and insulator sets for ax. systems.Definitions, test methods and acceptance criteria
Conduits for electrical purpose. Outside diameters of conduits A,D,Em,Hfor electrical installations and threads for conduits and fittings
Code of practice for the Electricity (Wiring) Regulations 1997Edition
Electricity (Wiring) Regulations
Electricity Supply Regulations Sections 4, 5, 6, 13, 14, 15, 16,18, 19, 20, 21 & 28. Electricity Supply (Special Areas)Regulations Section 8
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PSS
TR
TR
-92-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ELECTRICAL &MECHANICAL
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
Wiring & Cables
Wiring & Cables
Wiring & Cables
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
EMSD
IEC 60051
IEC 6005i
CAP 133
CAP311
CAP311
CAP311
CAP311
CAP 311
CAP 311
CAP 311
CAP 311
CAP 311
CAP311
CAP 311
CAP 311
CAP311
CAP 311
CAP 403
CAP 403
1997 Code of practice for the Electric (wiring) regulation
1984 International Electrotechnical Vocabulary.: Electric Cables
1990 International Electrotechnical Vocabulary.: Overhead Lines
Pesticides Ordinance
Air Pollution Control (Asbestos) (Administration) Regulation
Air Pollution Control (Air Control Zones) (Declaration)(Consolidation) Order
Air Pollution Control (Smoke) Regulations
Air Pollution Control (Specified Processes) (Removal ofExemption) Order
Air Pollution Control (Furnaces, Ovens and Chimneys)(Installation and Alteration) Regulations
Air Pollution Control (Open Burning) Regulation
Air Pollution Control (Dust & Grit Emission) Regulations
Air Pollution Control (Motor Vehicle Fuel) Regulation
Air Pollution Control (Vehicle Design Standards) (Emission)Regulations
Air Pollution Control (Specified Processes) (Specification ofRequired Particulars and Information) Order
Air Pollution Control (Fuel Restriction) Regulations
Air Pollution Control (Specified Processes) Regulations
Air Pollution Control Ordinance
Air Pollution Control (Construction Dust) Regulations
Ozone Layer Protection (Products Containing ScheduledSubstances) (Import Banning) Regulation
Ozone Layer Protection (Controlled Refrigerants) Regulation
HEC
HEC
HEC
PSS
OS
OS
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
-93-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
Air
Air
Air
Air
Air
Air
Air
Air
Effluent
Effluent
Effluent
Effluent
Effluent
Effluent
Effluent
Effluent
Effluent
Effluent
Energy
Energy
General
General
CAP 403
CAP 403
EPD
EPD
EPD
EPD
EPD/TR 8/97
WBTC 6/90
CAP 123
CAP 358
CAP 358
EPD
EPD
EPD
EPD
EPD
ISO 5667-10
ISO 5667-12
BS 6472
BS 6841
BS2011
CAP 131
1995
1995
1995
1995
1997
1990
1990
1991
1992
1993
1994
1992
1995
1992
1987
Ozone Layer Protection (Fees) Regulations
Ozone Layer Protection Ordinance
Practice note on control of air pollution in car parks
Practice note on control of air pollution in vehicle tunnel
Air quality guidelines for bus terminus
Air quality guidelines for car parks
Landfill Gas Hazard Assessment - Guidance Note
Greenhouse effect - allowance in design
Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations
Water Pollution Control Ordinance
Water Pollution Control (General) Regulations
Guidelines for the design of small sewage treatment plants
Technical memorandum on standards for effluents dischargedinto drainage and sewerage systems, inland and coastal waters
Guidance notes on discharges from village houses
Grease traps for restaurants and food processors
Connections to Sewers under the Water Pollution ControlOrdinance
Water quality - Sampling: Guidance on sampling of waste waters
Water quality - Sampling : Guidance on sampling of bottomsediments
Guide to evaluation of human exposure to vibration in buildings(1 Hz to 80 Hz)
Guide to measurement and evaluation of human exposure towhole-body mechanical vibration and repeated shock
Environmental testing
Town Planning Ordinance
Ep
Ep
Ep
Ep
Ep
HEC,Hy
A,Ep
A,Ep
A,D,Ep
Ep
HEC
HEC
HEC
A,D,HEC,T
AAHK
HEC
TR
TR
PSS
PSS
SS
SS
PSS
PSS
TR
TR
TR
PSS
SS
PSS
PDS
PSS
TS
TS
OS
OS
TS
TR
- 9 4 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
General
General
General
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
CAP 131
EPD
ISO 14000
ANSI/SAE AIR1845
BS 4196: Parti
BS 4196: Part 2
BS 5228: Part 1
BS 5228: Part 2
BS 5228: Part 3
BS 5228: Part 4
BS EN 60651
CAP 400
CAP 400
CAP 400
CAP 400
CAP 400
CAP 400
CAP 400
CAP 400
CAP 400
1997
1996
1991
1991
1984
1984
1984
1992
1994
Town Planning Regulations
Technical Memorandum on EIA Process - A Guide to the EIAOrdinance
Standards for environmental management
Procedure for the calculation of aeroplane noise in the vicinity ofairports
Sound Power Levels of Noise Sources : Precision Methods forDetermination Sound Power Levels for Broad-Band Sources inReverberation Rooms
Sound Power Levels of Noise Sources : Precision Methods forDeter Sound Power Levels for Discrete-Frequency & Narrow-Band Sources in Reverberation Rooms
Code of practice for basic information and procedures for noisecontrol
Guide to noise control legislation for construction anddemolition, including road construction and maintenance
Code of practice for noise control applicable to surface coalextraction by opencast methods
Code of practice for noise control applicable to piling operations
Specification for sound level meters
Noise Control Ordinance (Exemption from Section 6(1) and6(2)) (Chek Lap Kok) Order
Noise Control (Motor Vehicles) Regulation
Noise Control (Air Compressor) Regulations
Noise Control (General) Regulations
Noise Control Ordinance
Noise Control (Construction Work Designated areas) Notice
Noise Control (Construction Work) Regulation
Noise Control (Appeal Board) Regulations
Noise Control (Hand Held Percussive Breakers) Regulations
HEC
HEC
HEC
HEC
HEC
TR
PSS
SS
PSS
TS
TS
A,D,Ep,HEC,Hy,T,W
A,Ep,HEC,Hy,T,W
A,Ep,HEC,Hy
A5D,Ep,HEC,Hy,T
AAHK
PSS
PSS
PSS
PSS
PDS
TR
TR
TR
TR
TR
TR
TR
TR
TR
- 9 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
Noise
CAP 599
EPD
EPD
EPD
EPD
EPD
IEC651
IEC 804
IEC 942
ISO 3740
ISO 3741
ISO 3742
ISO 3743
ISO 3744
ISO 3745
1989
1989
1989
1996
1996
1979
1985
1988
1980
1988
1988
1988
1981
1977
Factories and Industrial Undertakings (Noise at Work)Regulations
Technical memorandum on noise from construction work otherthan percussive piling
Technical memorandum on noise from percussive piling
Technical memorandum on the assessment of noise from placesother than domestic premises, public places or construction sites
Technical Memorandum on Noise from Construction Work inDesignated Area
Technical Memorandum on Noise from Construction WorkOther than Percussive Piling
Sound level meters
Integrating-averaging sound level meters
Sound calibrators
Acoustics - determination of sound power levels of noise sources- guidelines for the use of basic standards and for the preparationof noise test codes
Acoustics - determination of sound power levels of noise sources- precision methods for broad-band sources in reverberationrooms
A,Ep,Hy
A,Ep,Hy
A,Ep,Hy
HEC
HEC
A,Ep,HEC,Hy
A,Ep,HEC,Hy
HEC
A,Ep,Hy
TR
PSS
PSS
PSS
PSS
PSS
PDS
PDS
PDS
TS
A,Ep,Hy
Acoustics - determination of sound power levels of noise sources A,Ep,Hy- precision methods for discrete-frequency and narrow-bandsources in reverberation rooms
Acoustics - determination of sound power levels of noise sources AJEpJIy- engineering methods for special reverberation test rooms
Acoustics - determination of sound power levels of noise sources AJEpJ ly- engineering methods for free-field conditions over a reflectingplane
Acoustics - determination of sound power levels of noise sources A,Ep,Hy- precision methods for ancchoic and semi-anechoic rooms
TS
TS
TS
TS
TS
- 9 6 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
Noise
Noise
Noise
Noise
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
Waste
ISO 3746
ISO 4871
ISO 4872
ISO 6393
ASTMD1973
CAP 354
CAP 354
CAP 354
CAP 354
EPD
EPD
EPD
EPD
EPD
EPD
PN 3/96
WBTC 14/94
1995
1984
1978
1985
1991
1992
1992
1992
1993
1992
1992
1996
1995
Acoustics - Determination of sound power levels of noisesources using sound pressure - Survey method using anenveloping measurement surface over a reflecting plane
Acoustics - noise labelling of machinery and equipment
Acoustics - measurement of airborne noise emitted byconstruction equipment intended for outdoor use - method fordetermining compliance with noise limits
Acoustics - measurement of airborne noise emitted by earth-moving machinery - method for determining compliance withlimits for exterior noise - Stationary test condition
Standard Guide for Design of a Liner System for Containment ofWastes
Waste Disposal (Charges for Disposal of Chemical Waste)Regulation
Waste Disposal Ordinance
Waste Disposal (Chemical Waste) (General) Regulation
Waste Disposal (Permits and Licences) (Forms and Fees)Regulation
Code of practice on the handling, transport and disposal ofpolychlorinated biphenyl (PCB) wastes
Code of practice on the packaging, labelling and storage ofchemical wastes
EPD technical circular No. 1-1-92 - classification of dredgedsediments for marine disposal
Code of practice on the handling, transport and disposal ofasbestos wastes
A Guide to the Registration of Chemical Waste Producers
A Guide to the Chemical Waste Control Scheme
Pro PECC Practice Notes for Landfill Gas Hazard Assessmentfor Developments adjacent to Landfills
Use of PFA as general fill in reclamation
A,Ep,HEC,Hy
A,Ep,Hy
A,Ep,Hy
A3Ep,Hy
A;C,Ep
A,C,Ep
A,C,Ep,HEC
A,C,Ep
A,C,Ep
HEC
HEC
Ep
TS
OS
TS
TS
PSS
TR
TR
TR
TR
PSS
PSS
OS
PSS
OS
PSS
PDS
C,Ep PSS
- 9 7 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
FOUNDATIONS
GAS SUPPLY
Waste
Waste
Waste
Waste
Waste
General
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Piling
Flueing S
WBTC 16/96
WBTC 2/93
WBTC 22/92
WBTC 4/98
WBTC 5/98
BS 8004
ASD
ASTMD1143
ASTM D 3689
ASTM D 3966
ASTM D 4945
BS 5573
BS 8008
CIRIA
GEO PublicationNo. 2/90
GEO Report No.29
GEO Report No.32
HKIE
^Ventilation BS 1181
1996
1995
1992
1998
1998
1986
1991
1981
1983
1981
1989
1978
1996
1977
1990
1994
1994
1981
1989
Wet Soil in Public Dumps
Public dump
Marine disposal of dredged mud
Use of Public Fill in Reclamation and Earth Filling Projects
On site sorting of Construction Waste on Demolition Sites
Code of practice for foundations
Particular specification for non-destructive integrity testing forpiling
Standard Method of Testing Piles under Static AxialCompressive Load
Standard method of testing individual piles under static axialtensile load
Standard method of testing piles under lateral load
Standard test method for high-strain dynamic testing of piles
Code of practice for safety precautions In the construction oflarge diameter boreholes for piling and other purposes
Safety precautions and procedures for the construction anddescent of machine-bored shafts for piling and other purposes
Integrity testing of piles: a review
Foundation properties of marble and other rocks in the YuenLong - Tuen Mun area
Classification and zoning of marble sites
Karst morphology for foundation design
Guidance Note on Hand-dug Caissons
Specification for clay flue linings and flue terminals
C,Ep
C,Ep
A,C,Ep
C
C
A,AAHK,C,D,H,HEC,Hy,MTRC,T,W
PDS
OS
PSS
PSS
PSS
PSS
A,HEC TS
A,C,DtHEC,Hy,T,W TS
A,C,D,HEC,Hy,T,W TS
A,C,D,HEC,Hy,T,W TS
A,C,D,HEC,Hy,T,W TS
A,C,D,H,HEC,Hy, PSSMTRC,T,W
AAHK PSS
AJ1EC TS
A,C,D,HEC,Hy,T,W OS
CHEC
CHEC
OS
PSS
A,C,D,H,Hy,T,W PSS
A,AAHK,Ep,HKC, PDSHv
- 9 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY Flueing & Ventilation BS 1289: Part 2 1989
GAS SUPPLY Flueing & Ventilation BS 5440
GAS SUPPLY Flueing & Ventilation BS 5440 : Part 1 1990(1995)
GAS SUPPLY Flueing & Ventilation BS 5440: Part 2 1989(1994)
GAS SUPPLY Fiueing & ventilation BS 5720 1979
GAS SUPPLY Fiueing & ventilation BS 5925 1991 (1995)
GAS SUPPLY Fuel Gas Installations BS 5045 : Part 2 1989
GAS SUPPLY Fuel Gas Installations BS 5258
GAS SUPPLY Fuel Gas Installations BS 5258: Part 1 1986
GAS SUPPLY Fuel Gas Installations BS 5258: Part 12 1990
GAS SUPPLY Fuel Gas Installations BS 5258: Part 2 1975
GAS SUPPLY Fuel Gas Installations BS 5258: Part 5 1989
GAS SUPPLY Fuel Gas Installations BS 5355 1976
GAS SUPPLY Fuel Gas Installations BS 5386
GAS SUPPLY Fuel Gas Installations BS 5386: Part 1 1976
GAS SUPPLY Fuel Gas Installations BS 5386: Part 3 1980
GAS SUPPLY Fuel Gas Installations BS 5386: Part 4 1991
GAS SUPPLY Fuel Gas Installations BS 5386: Part 5 1988
GAS SUPPLY Fuel Gas Installations BS 5386: Part 6 1991
Flue blocks and masonry terminals for gas appliances -specification for clay flue blocks and terminals
Installation of flues and ventilation for gas appliances of ratedinput not exceeding 60 kW(lst, 2nd and 3rd family gases)
Specification for installation of flues
Specification for installation of ventilation for gas appliances
Codes of practice for mechanical ventilation and air conditioningin building
Codes of practice for ventilation principles and designing fornatural ventilation
Transportable gas containers : Specification for steel containersof 0.5 L up to 450 L water capacity with welded seams
Safety of domestic gas appliances
Specification for central heating boilers and circulators
Specification for decorative fuel effect gas appliances (2nd and3rd family gases)
Cooking appliances
Specification for gas fires
Specification for filling ratios and developed pressures forliquefiable and permanent gases
Specification for gas burning appliances
Gas burning appliances for instantaneous production of hot waterfor domestic use
Domestic cooking appliances burning gas
Built-in domestic cooking appliances
Specification for gas burning instantaneous water heaters withautomatic output variation (2nd and 3rd family gases)
Specification for Domestic Gas Cooking Appliances withForced-convection Ovens
A,HEC
A,Em,HKCG
A,Em,HKCG
A,Em,HKCG
HKCG
HKCG
HEC
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
A,Em
Em
PDS
PSS
PSS
PSS
PSS
PSS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 9 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Fuel Gas Installations BS EN 26 1989
Fuel Gas Installations BS EN 969 1996
Fuel Gas Installations CAP 51
Fuel Gas Installations CAP 51
Fuel Gas Installations CAP 51
Fuel Gas Installations CAP 51
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations IGE/SR/4 1986
CAP 51
CAP 51
CAP 51
CAP 51
CS4(HSE)
EMSD
GU 03: Parti
GU05
GU06
GU09
HKCG/SER OP 4
HKCG/SER OP 5
HKCG/SER OP 7
HKCG/SER OP 8
HKCG/SER/OP 6
IGE/SR/3
1997
1991
1998
1997
1998
1991
1989
1989
1992
1992
1987
Gas fired Instantaneous Water Heaters for the production ofdomestic water fitted with atmospheric burners
Specification for ductile iron pipes, fittings, accessories and theirjoints for gas pipelines. Requirements and test methods
Gas Safety Ordinance
Gas safety (gas supply) regulations
Gas safety (gas quality) regulations
Gas safety (registration of gas installers and gas contractors)regulations
Gas safety (registration of gas supply companies) regulations
Gas safety (miscellaneous) regulations
Gas safety (gasholders examination) regulation
Gas safety (installation and use) regulations
The keeping of LPG in cylinders and similar containers
Code of Practice - Avoiding Danger from Gas Pipes
Domestic instantaneous gas water heaters
Approval of Domestic Gas Appliances
LPG installation for catering in commercial premises
Low Pressure Regulators for Supplying Gas From LPGCylinders Having Less Than 40 Litres Water Capacity
Towngas service risers
Towngas meters
Towngas domestic appliances
Towngas non-domestic appliances
Towngas installation pipes
Electrical equipment in gas production transmission storage anddistribution
Low pressure gasholders storing lighter than air gases
A, Em
HEC
A,Em
A,HEC
A,Em
Em
A,Em
Em
A, Em
A,Em
A,Em
A,Em
A.Em
A,Em
PDS
TS
TR
TR
TR
TR
TR
TR
TR
TR
PSS
PSS
PDS
PDS
FSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
A, Em PDS
-100-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Fuel Gas Installations IGE/SR/5 1987
Fuel Gas Installations IGE/TD/1 1984
Fuel Gas Installations IGE/TD/10 1986
Fuel Gas Installations IGE/TD/11 1987
Fuel Gas Installations IGE/TD/12 1985
Fuel Gas Installations IGE/TD/3 1983
Fuel Gas Installations IGE/TD/4 1981
Fuel Gas Installations IGE/TD/5 1987
Fuel Gas Installations IGE/TD/6 1989
Fuel Gas Installations IGE/TD/7 1967
Fuel Gas Installations IGE/TD/9 1986
Fuel Gas Installations ISO 10400 1993
Fuel Gas Installations ISO 10409 1993
Fuel Gas Installations ISO 10431 1993
Fuel Gas Installations ISO 3183 1980
Fuel Gas Installations ISO 6976 1995
Fuel Gas Installations LPGACP 2 1994
Fuel Gas Installations LPGACP 9 1986
Fuel Gas Installations LPGA CP 1 1993
Entry into and work associated with confined spaces
Steel pipelines for high pressure gas transmission
Pressure regulating installations for inlet pressures between 75bar and 7 bar
Operation and maintenance of gas pressure raising plant foroutlet pressure not exceeding 7 bar
Pipework stress analysis for gas industry plant
Distribution mains
Gas services
Transport handling and storage of plastic pipe part 1polyethylene pipe
Handling transport and storage of steel pipe bends tees valvesand fittings Parts 1, 2 and 3
Transport and handling of cast iron pipes
Offtakes and pressure regulating installations for inlet pressuresbetween 7 and 100 bar
Petroleum and natural gas industries - Formulae and calculationfor casing, tubing, drill pipe and line pipe properties
Petroleum and natural gas industries - Application of cementlining to steel tubular goods, handling, installation and joining
Petroleum and natural gas industries - Pumping units -Specification
Oil and natural gas industries - Steel line pipe
Natural gas - Calculation of calorific values, density, relativedensity and wobble index from composition
Safe handling and transport of LPG in bulk in road tankers andtank containers
Recommendations for LPG-air plants
Installation and Maintenance of Bulbe LPG storage atConsumer's Premises
A,Em,Hy
A,Em5Hy
A,Em
PSS
PDS
PDS
A,Em PSS
A,Em
A,Em,Hy
A,Em
A,Em
TS
PDS
SS
PSS
A,Em PSS
A,Em
A,Em
HEC
HEC
HEC
HEC
HEC
PSS
PDS
OS
PSS
PDS
PDS
OS
A,Em
A,Em
Em
PSS
PDS
PSS
- 1 0 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Fuel Gas Installations LPGA CP 10 1986
Fuel Gas Installations LPGA CP 11 1986
Fuel Gas Installations LPGA CP 12 1986
Fuel Gas Installations LPGA CP 14 1986
Fuel Gas Installations LPGA CP 15 Parts 19861,2
Fuel Gas Installations LPGA CP 17 1986
Fuel Gas Installations LPGA CP 18 1986
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations
Fuel Gas Installations NFPA 59A
General CAP 51
General CAP 51
General CAP 51
General CAP 51
LPGA CP 19
LPGA CP 20
LPGA CP 21
LPGA CP 22
LPGA CP 24
LPGA CP 7
NFPA 58
NFPA 59
1986
1986
1986
1990
1992
1986
1979
1979
Recommendations for the safe handling of LPG in small trailer A,Emmounted vessels skid tanks and small bulk storage vesselspermanently attached to mobile gas fired equipment
Recommendations for the safe handling of LPG used as an A,Eminternal combustion engine fuel for motor vehicles
Recommendations for the safe filling of LPG cylinders at depots A,Em
Recommendations for the use operation inspection testing and A,Emmaintenance of LPG hose assemblies and associated equipment
Valves for LPG cylinders A,Em
Pipeline API5L
Purging LPG vessels and systems
Recommendations for the safe use of LPG as a propulsion fuelfor boats yachts and other craft
Liquid measuring systems for LPG
Automotive LPG refuelling facilities
Guidelines for caravan ventilation and flueing checks
LPG piping system design and installation
LPG cylinders in residential Premises
Storage of Full and Empty LPG Cylinders and Cartridges
Storage and handling - liquefied petroleum gases
Standard of the storage and handling of liquefied petroleumgases at utility gas plants
Production, storage and handling of liquefied natural gas (LNG)
Gas Safety Ordinance
Gas Safety (Gas Supply) Regulations
Gas Safety (Installation and Use) Regulations
Gas Safety (Registration of Gas Installers and Gas Contractors)Regulations
1995(1997) Specification for Line Piping HKCG
PSS
PSS
PSS
PSS
PDS
A,Em
A,Em
A, Em
A,Em
A,Em
A, Em
A,Em
Em
A,Em,HEC
A,Em,HEC
HEC
PDS
PSS
PDS
PDS
TS
PSS
PDS
PSS
PSS
PSS
PSS
TR
TR
TR
TR
PDS
- 102-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
AS/NZS4130
ASMEB16.5
ASMEB16.9
BGC/PS/P1
BGC/PS/P13
BGC/PS/PL2: Part1
BGC/PS/V7: Part1
BGC/PS/V7: Part2
BGES/P2
BS 1387
BS 143 & 1256
BS 1360: Section3.1
BS 1640: Part 1
BS 1640: Part 2
BS 1640: Part 3
BS 1640: Part 4
BS21
1997
1996
1993
1976
1984(1987)
1986
1988
1986
1994
1985
1986(1995)
1989(1995)
1962
1962
1968
1968
1985 (1990)
Polyethylene (PE) pipes for pressure applications
Pipe Flanges and Flanged Fittings
Factory-made wrought steel butt welding fittings
Specification for the welding of steel pipe for distributionsystems and installations (operating at pressures below 7 bar)
Specification for the partial penetration butt welding, sockets and HKCGfillet welding of steel pipe and fittings for operating pressures upto 7 bar.
Technical specification for polyethylene pipes and fittings for HKCGnatural gas and suitable manufactured gas - Pipes
Metal bodied valves (80mm to 300mm nominal size) suitable for HKCGuse in the pressure ranges up to 2 bar and up to 7 bar
Plastics bodied valves of sizes up to 63mm suitable for operation HKCGat pressures not exceeding 4 bar
Technical specification for welding of land pipelines and HKCGinstallations designed to operate at pressures greater than 7 bar(Incorporating BS 4515)
Specification for screwed and socketed steel tubes and tubulars HKCGand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads
Specification for malleable cast iron and cast copper alloythreaded pipe fittings
Specification for steel flanges
Wrought carbon and ferritic alloy steel fittings
Wrought and cast austenitic chromium nickel steel fittings
Wrought carbon and ferritic alloy steel fittings. Metric Units
Wrought and cast austenitic chromium-nickel steel fittings.Metric units
Specification for pipe threads for tubes and fittings wherepressure-tight joints are made on the threads (metric dimensions)
HKCG
HKCG
HKCG
HKCG
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
PDS
PDS
PDS
PDS
PDS
PDS
HKCG PDS
-103-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
BS2971
BS 3293
BS3601
BS 3974: Parti 1974(1981)
BS 3974: Part 2 1978
BS 4504: Section 1989(1993)3.1
BS4515 1996
BS5150 1990
BS7281 1990
BS7336 1990
BS 7361: Parti 1991
BS8313 1997
BS 864: Part 2 1983(1992)
BS EN 1057
BS EN 1092: Part 19972
1991 Specification for class II arc welding of carbon steel pipework for HKCGcarrying fluids
1960 Specification for carbon steel pipe flanges (over 24 inchesnominal size) for the petroleum industry
1987 Specification for carbon steel pipes and tubes with specified
room temperature properties for pressure purposes
Pipe hangers, slider and roller type supports
Pipe clamps, cages, cantilevers and attachments to beams
Specification for steel flanges
Welding of steel pipelines on land and offshore
Specification for cast iron gate valves
Polyethylene pipes for the supply of gaseous fuels
Polyethylene fusion fittings with integral heating element(s) foruse with polyethylene pipes for the conveyance of gaseous fuels
Cathodic protection : Code of practice for land and marineapplications
Code of practice for accommodation of building services in duct
Specification for capillary and compression fittings for coppertubes
1996 (1997) Copper and copper alloys seamless round copper tubes for waterand gas in sanitary and heating applications
Cast Iron flanges
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
PSS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
HKCG
BS EN 969 1996 Ductile iron pipes, fittings, accessories and their joints for gaspipelines - Requirements and test methods
GB 15558 1 1995 Buried polyethylene (PE) pipes for the supply of gaseous fuels
GBE/B4 1993 Technical specification for carbon and carbon manganese steelbends 50mm to 400mm inclusive nominal size produced fromseamless pipe for operating pressures greater than 7 bar
PSS
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 104-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
GBE/B7
GBE/ECP1
GBE/F1
GBE/F3
GBE/F8
GBE/LX1
GBE/LX4
GBE/PL2:Part4
GBE/PL2: Part 6
GBE/PL3
GBE/T1
GBE/T2
GBE/V6: Part 1
1993
1992
1993
1993 (1995)
1993
1993 (1994)
1993
1993 (1994)
1993 (1994)
1993
1993 (1994)
1993 (1995)
1994
Technical specification for carbon and carbon manganese steel HKCGbends equal to or greater than 450mm nominal size for operatingpressures greater than 7 bar
HKCG
HKCG
HKCG
HKCG
HKCG
HKCG
Code of practice for corrosion control of buried steel and ductileiron pipework
Technical specification for carbon and carbon manganese steelforging and forged components for operating pressures greaterthan 7 bar
Technical specification for carbon and carbon manganese steelreducers 50mm to 1050mm inclusive nominal size for operatingpressures greater than 7 bar
Technical specification for carbon and carbon manganese steelbutt welding end caps
Technical specification for submerged-arc welded pipe 400mmto 1400mm inclusive nominal size for operating pressures greaterthan 7 bar
Technical specification for seamless pipe 150mm to 450mminclusive nominal size for operating pressures greater than 7 bar
Fusion fittings with integral heating element(s)
Spigot end fittings for electrofusion and/or butt fusion purposes
Technical specification for self anchoring mechanical fittings forpolyethylene pipe for natural gas and suitable manufactured gas
Technical specification for carbon and carbon manganese steel HKCGtees equal to or greater than 450mm nominal size produced fromplate for operating pressures greater than 7 bar
Technical specification for carbon and carbon manganese steel HKCGtees 50mm to 450mm inclusive nominal size produced fromseamless pipe for operating pressures greater than 7 bar
Technical specification for steel valves for use with natural gas at HKCGnormal operating pressures above 7 bar - 100mm nominal sizeand above
PDS
PSS
PDS
PDS
PDS
PDS
PDS
HKCG
HKCG
HKCG
PDS
PDS
PDS
PDS
PDS
PDS
-105-
Construction Standards Used in Hong Kong (December 1998)
SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
Pipeline GBE/V6: Part 2 1993 (1994) Technical specification for steel valves for use with natural gas at HKCG PDSnormal operating pressures above 7 bar - 80mm nominal size andbelow
Pipeline IGE/TD/1 1993 Steel Pipelines for High Pressure Gas Transmission (Edition 3) HKCG PDS(reprint with amendments : 1995)
Pipeline IGE/TD/9 1986 (1990) Offtakes and Pressure-regulating Installations for the Inlet HKCG PDSPressures between 7 and 100 Bar.
Pipeline ISO 4437 1997 Buried polyethylene (PE) pipes for the supply of gaseous fuels - HKCG PDSMetric series - Specifications
Pipeline prEN 1555 1997 Plastics piping systems for the supply of gaseous fuels - HKCG PDSPolyethylene (PE)
Blasting BS3618: Section 1972(1987) Glossary of mining terms-drilling and blasting A,C,H,HEC,Hy,T,W OS6
Blasting BS 5607 1988 Code of practice for safe use of explosives in the construction A,C,H,HEC,Hy,T,W PSSindustry
Blasting BS 6657 1986 Guide to prevention of inadvertent initiation of electro- A,AAHK,C,H, PSSexplosives devices by radio-frequency radiation HEC,Hy,MTRC,T,
W
Cavern Works BA and FSD 1994 Guide to fire safety design for caverns A,B,C,D,H,HEC, PSSHy,T,W
Cavern Works GEO 1992 Geoguide 4 - Guide to cavern engineering A3,C,H,HEC,Hy,T, PSSW
Earth Retaining Wall BS 8002 1994 Code of practice for earth retaining structures A,B,C,D,H,HEC, PSSHy,T,W
Earth Retaining Wall GEO Geotechnical manual for slopes A,B,C,D,H,T,W OS
Earth Retaining Wall GEO 1993 Geoguide 1 - Guide to retaining wall design A,B,C,D,H,HEC, PSSHyXW
Earth Retaining Wall GEO 1989 Geospcc 2 - Model specification for reinforced fill structures A,B,C,D,HyXW PDS
Excavation & Site BS 6031 1981 Code of practice for earthworks A,AAHKX\HEC, PSSFormation MTRC
- 106-
GROUP
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GAS SUPPLY
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKS
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
GEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKS
GEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSHIGHWAYS
Excavation & SiteFormation
BS 6164 1990
Excavation & Site GEO Report No. 1996Formation 36
Geotechnical Works ASTM C 1242
Geotechnical works BS 1924 1990
Geotechnical works BS 1924: Part 1 1990
Geotechnical Works BS 8081 1989
Geotechnical Works BS EN ISO 10319 1996
Geotechnical Works GEO
Geotechnical Works GEO
Geotechnical Works GEO
Geotechnical Works GEO
1995
1989
1989
Ground Investigation BS 4019: Part 1 1974
Ground Investigation BS 5930
Ground Investigation GEO
Ground Investigation GEO
Bridges AASHTO
1981
1987
1988
1983
Code of practice for safety in tunnelling in the constructionindustry
Methods of test for soils in Hong Kong for Civil Engineeringpurposes (phase I tests)
Guide for Design, Selection and Installation of Stone Anchors,and Anchoring Systems
Stabilised materials for civil engineering purposes
General requirements, sampling, sample preparation and tests onmaterials before stabilisation
Code of practice for ground anchorages
Geotextiles. Tensile test for joints/seams by wide-width method AAHK
MTRC
A,AAHKC,D,H,HEC,Hy,T,W
MTRC
A,C,Em,H,HEC,Hy,MTRC,T,W
A,HEC,Hy,T5W
AAHK,MTRC
PSS
TS
PSS
PDS
TS
PSS
TS
Geotechnical manual for slopes
Geoguide 5 - Guide to slope maintenance
Geospec 1 - Model specification for prestressed ground anchors
Geospec 2 - Model specification for reinforced fill structures
Basic equipment
Code of practice for site investigations
Geoguide 2 - Guide to site investigation
Geoguide 3 - Guide to rock and soil descriptions
Guide specification for seismic design of highway bridges
A,AAHK,B,C,D, OSEp,H,HEC,HysT,W
A,C,D,E,Ep,H, PSSHEC,Hy,T,W
A,AAHK,B,C,D,H, PDSHEC,Hy,T,W
A,AAHK,B,C,D,H, PDSHEC,Hy,T,W
H TS
A,AAHK,C,D,H, PSSHEC,Hy,MTRC,T,W
A,B,C,D5H,Hy,T,W PSS
A,AAHK,B,C,D,H, OSHEC,Hy,T,W
Hy PSS
- 1 0 7 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
AASHTO 1991
BS 5400
BS 5400: Parti 1988
BS 5400: Part 10 1980
BS 5400: Part 2 1978
BS 5400: Part 3 1982
BS 5400: Part 4 1990
BS 5400: Part 5 1979
BS 5400: Part 6 1980
BS 5400: Part 7 1978
BS 5400: Part 8 1978
BS 5400: Part 9 1983
BS 5400: Section 19839.1
BS 5400: Section 19839.2
BS 6779: Parti 1998
BS 6779: Part 2 1991
Guide specification and commentory for vessel collision design Hy PSSof highways bridges
Steel, concrete and composite bridges
Steel, concrete and composite bridges - general statement
Steel, concrete and composite bridges - code of practice forfatigue
Steel, concrete and composite bridges - specification for loads
Code of practice for design of steel bridges
Code of practice for design of concrete bridges
Code of practice for design of composite bridges
Specification for materials and workmanship, steel
A,AAHK,B,C,H, PSSHEC,Hy,MTRC,T
A,B,C,HEC,Hy,T,W OS
A,B,HEC,Hy,T,W PSS
A,AAHK,C,HEC, PSSHy,MTRC,T,W
A,B,C,H,HEC,Hy,T, PSSW
A,AAHK,C,HEC, PSSHy,MTRC,T,W
A,B,C,HEC,Hy,T,W PSS
A,AAHK,B,H, PSSHEC,Hy,MTRC,T,W
A,HEC,Hy,T,W PSSSpecification for materials and workmanship, concrete,reinforcement and prestressing tendons
Recommendations for materials and workmanship, concrete, A,lfECJly,T,W PSSreinforcement and prestressing tendons
Bridge bearings
Code of practice for design of bridges bearings
Specification for materials, manufacture and installation ofbridge bearings
Specification for vehicle containment parapets of metal llECJIy PDSconstruction
Specification for vehicle containment parapets of concrete Hy PDSconstruction
A,AAHK,B,C,HEC\ PDSHy,T,W
A3JIBC,Hy/!YW PSS
A,AAHKjyiEC PSSHy,MTRC/I\W
- 108-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
Bridges
BS 6779: Part 3
BS 8004
DIN 1072
DIN 1075
DIN 18809
DOT 37/88
DOT 58/94
DOT BE 5
DOT BE 6
HyD
Concrete Carriageway BS 1134
Concrete Carriageway BS 1134: Part 1
Concrete Carriageway BS 1134: Part 2
Concrete Carriageway BS 5212
1994
1986
1985
1981
1987
DIN 4227: Part 3 1983
1989
1994
1982
1967
1997
1988
1990
1990
Concrete Carriageway BS 5212: Part 1 1990
Concrete Carriageway BS 5212: Part 2 1990
Concrete Carriageway BS 5212: Part 3 1990
Concrete Carriageway GSCEW 1992
Concrete Carriageway GSCEW 1992
Concrete Carriageway RD/GN/013 1990
Specification for vehicle containment parapets of combinedmetal and concrete construction
Code of practice for foundations
Road bridges, design loads
Concrete bridges, design and construction
Steel road & footway bridges; dimensioning, design construction
Prestressed concrete, structural members in segmentalconstruction; design & execution of joints
Loads for Highway Bridges
The design of concrete highway bridges and structures withexternal and unbonded prestressing
The design of highway bridge parapets
Expansion joints for use in highway bridge decks
Structures design manual for highways and railways (2ndedition)
Assessment of surface texture
Methods and instrumentation
Guidance and general information
Cold applied joint sealant systems for concrete pavements
Specification for Joint Sealants
Code of practice for the application and use of joint sealants
Methods of Test
Surface regularity of concrete carriageway
Testure depth of concrete carriageway
Unreinforced concrete slabs for rigid pavement
Hy PDS
A,C,HsHEC,Hy,T,W PSS
A,HEC5Hy,T PSS
A,HEC,Hy,T PSS
A,HEC,Hy,T PSS
A,HEC,Hy5T PSS
A,B,C,HEC,Hy,T,W OS
HEC,Hy PSS
HEC,Hy PSS
HEQHy PDS
A,B,C,HEC,HyJ,W PSS
B
AAHK,B,HEC
AAHK,B,HEC
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
C,HEC
C,HEC
A,HEC,Hy,T,W
TS
TS
TS
PDS
PDS
PSS
TS
TS
TS
PDS
-109-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Concrete Carriageway RD/GN/020
Concrete Carriageway UKRRL RoadNote 27
Flexible Surfacing
Flexible Surfacing
Flexible Surfacing
Flexible Surfacing
Flexible Surfacing
Flexible Surfacing
Flexible Surfacing
Footway
Footway
Footway
Footway
Footway
Footway
Footway
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
BS 6677
GSCEW
GSCEW
GSCEW
RD/GN/010A
RD/GN/011A
UKRRL Road
Note 27
BS 3049
BS5931
BS 7263
BS 7263: Parti
BS7818
RN9
RN9A
BSEN124
CAP 368
CAP 370
CAP 374
1995 Panelling design & joint construction of concrete slabs
1969 Instructions for using the portable skid-resistance tester
1986( 1997) Clay and calcium silicate pavers for flexible pavement
1992 Surface regularity of final layer of pavement
1992 Permeability of fiction course material
1992 Texture depth of bituminous road surfacing
1995 Glossary of terms commonly used in flexible pavement
construction
1994 Noise reducing highway surfacing
1969 Skid resistance of compacted bituminous paving materials
1976 Specification for pedestrian guard rails (metal)
1980 Code of practice for machine laid in situ edge details for pavedareas
Precast concrete flags, kerbs, channels, edgings and quadrants
1990 Specification
1995 Specification for pedestrian restraint systems in metal
1986( 1990) Precast concrete paving blocks - code of practice for laying
1997 Precast concrete unit paving system
1994 Gully tops and manhole tops for vehicular and pedestrian areas,
Design requirements, type testing, marking, quality control
Road Tunnels (Government) Ordinance
Roads (works. Use and Compensation) Ordinance
Road Traffic Ordinance
A9HEC,HKT,Hy,T,W
A,HEC,Hy,T
A,D,HEC,Hy,T
C.HEC
C,HEC
C,HEC
A,Hy,T,W
A,Hy,T,W
A,CfD,Em,H,HEC,Hy,T,W
Hy
A,AAHK,H,HEC,Hy,MTRC\T,W
AIXHEQHy,MTRC,T,W
A,AAHK,D,H,HEC,Hy,MTRC,T,W
Hy,MTRC
A,DJiECJ]yXW
A,D,HEC,HKT,Hv,T,W
A,AAilK,HK*r
PSS
TS
PDS
TS
TS
TS
OS
PDS
TS
PDS
PSS
PDS
PDS
PDS
PSS
PDS
PSS
TR
TR
TR
- 110-
Construction Standards Used in Hong Kong (December 1998)
GROUP
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
SUBGROUP
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Pavement Design
Pavement Design
Pavement Design
Pavement Design
Pavement Design
Pavement Design
Pavement Design
Pavement Drainage
Pavement Drainage
Pavement Drainage
Pavement Testing
Pavement Testing
Paving Design
Paving Testing
Road Lighting
Road Lighting
NUMBER
CAP 374
HyDTC4/91
HyDTC 4/96
RD/GN/014A
TPDM Vol. 9
BS 7533
CAP 123
HyD
RD/GN/012
RD/GN/017
RN5
TPDM Vol 2
HOI 9/85
RN6
RN8
RD/GN/009
RD/GN/012
RD/GN/008
RD/GN/001
APLE
BS4533
YEAR
1991
1996
1996
1992
1996
1990
1993
1983
1985
1994
1986
1989
1990
1989
TITLE
Road Traffic (Traffic Control) Regulations
Appendix to the code of practice for the lighting signing andguarding of road works describing the requirements for works onexpressways
Code of practice for the lighting, signing and guarding of roadworks
Permanent trench reinstatement
Public transport
Guide for structural design of pavements constructed with clay orconcrete block pavers
Building (Private Streets and Access Roads) Regulations
Pavement design manual
Soil test for pavement design
Guidance notes on pavement design
Road surface requirements for high speed roads
Highway design characteristics
Road gully pots
Road pavement drainage
Sub-soil drainage
Road testing
Soil test for pavement design
Asphaltic overlay design
Pavement deflection by Benkelman Beam
Technical reports: No. 7 Section 2: Specification for masts andfoundations
Luminaries
USERORGANISATION
HEC,Hy,T,W
Hy,T,W
A,HEC,HKT,Hy,T,W
HEC
A,D,HEC,Hy,T,W
A,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T5W
A,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
A,Em,Hy
Hy
TYPE
TR
OS
PSS
PSS
OS
PSS
TR
PSS
TS
PSS
PDS
PDS
PDS
PDS
PDS
TS
TS
PSS
TS
PDS
PDS
- 1 1 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
BS 4533: Part 101
BS 4533: Part 2
BS4533: Section102.1
BS4533: Section102.2
BS4533: Section102.3
BS4533: Section102.5
BS 4533: Section102.6
BS 4533: Section103.1
BS 5489: Part 1
BS 5489: Part 10
BS 5489: Part 2
BS 5489: Part 3
BS 5489: Part 4
BS 5489: Part 5
BS 5489: Part 6
BS 5489: Part 7
BS 5489: Part 8
BS 5489: Part 9
1990
1979
1990
1990
1990
1990
1990
1981
1992
1992
1992
1992
1992
1992
1992
1992
1992
1992
Specification for general requirements and tests
Detail requirements
Specification for fixed general purpose luminaires
Specification for recessed luminaires
Specification for luminaires for road and street lighting
Specification for floodlights
Specification for luminaires with built-in transformers forfilament lamps
Specification for light distribution from road-lighting lanterns
Road lighting - guide to the general principles
Road lighting - code of practice for lighting of motorways
Road lighting - code of practice for lighting for traffic routes
Road lighting - code of practice for lighting for subsidiary roadsand associated pedestrian areas
Road lighting - code of practice for lighting for single-level roadjunctions including roundabouts
Road lighting - code of practice for lighting for grade-separatedjunctions
Road lighting - code of practice for lighting for bridges andelevated roads
Road lighting - code of practice for lighting for tunnels andunderpasses
Road lighting - code of practice for lighting for roads nearaerodromes, railways, docks and navigable water-ways
Road lighting - code of practice for lighting for urban centres andpublic amenity areas
Hy
Hy
Hy
Hy
A,HEC,Hy,T,W
Hy
Hy
A,HEC,Hy,T
A,HEC,Hy,T
A,HEC,Hy,T
A,HEC,Hy,T
A,HEC,Hy/r
A,HEC,Hy,T
A,HECHy,T
AJ-IECHy/r
AJIECJIy/r
A,HEC,Hy,T
AJIECilv.T
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
- 112-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Lighting
Road Making
Road Marking
Road Marking
BS 5649
BS 5649: Part 1
BS 5649: Part 2
BS 5649: Part 3
BS 5649: Part 4
BS 5649: Part 5
BS 5649: Part 6
BS 5649: Part 7
BS 5649: Part 8
BS 5649: Part 9
BS 5972
BS EN 40-1
BS EN 60598-2-2
BS EN 60598-2-3
HyD
HyDTC 2/92
HyDTC 4/92
TPDM Vol. 3
BS 3262
BS 3262: Part 1
1978
1978
1982
1982
1982
1982
1985
1982
1982
1980
1992
1997
1994
1996
1992
1992
1989(1985)
Lighting columns
Definitions and terms
Dimensions and tolerances
Specification for materials & welding requirements
Recommendations for surface protection of metal lightingcolumns
Specification for base compartments and cableways
Specification for design loads
Method for verification of structural design by calculation
Method for verification of structural design by testing
Specification of special requirements for reinforced &prestressed concrete lighting columns
Specification for photoelectric control unit for road lighting
Lighting columns - Definitions and terms
Specification for recessed luminaires
Specification for luminaires for road and street lighting
Public lighting design manual
Design guidance note and model electrical specification forlighting installations serving highways structures such asfootbridges, subways, covered walkways
Guidelines on the adoption of road lighting design based on BS5489 Part 2 (1987)
Traffic signs and road markings
Hot-applied thermoplastic road marking materials
Specification for constituent materials and admixtures
A,AAHK,HEC,Hy,T
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T,W
A,HEC,Hy,T
A,Hy,T,W
A,H,Hy
A,H,Hy,W,T
A,Hy,T
A,HEC,Hy,T
A,HEC,Hy,T
A,HEC,Hy
A,C,D,Em,H,HEC,Hy,T,W
A,AAHK,C,D,EmsH,HEC,Hy,MTRC,T,W
PDS
OS
OS
PDS
PDS
PDS
PSS
PSS
TS
PDS
PDS
OS
PDS
PDS
PSS
PSS
PSS
PDS
PDS
PDS
- 1 1 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
Road Marking
Road Marking
Road Marking
Road Marking
BS 3262: Part 3
BS 6044
BS 6088
BS EN 1423
1989 Specification for application of material to road surfaces
Road Marking HOI 8/85
Road Marking HyDTC 29/97
Road Marking RN 7
Road Paving Materials ASTM D 546
Road Paving Materials ASTM D 946
Road Paving Materials ASTM D 979
Road Paving Materials BS 1447
Road Paving Materials BS 434
Road Paving Materials BS 434: Part 1
Road Paving Materials BS 434: Part 2
Road Paving Materials BS 4987: Part 1Part 2
Road Paving Materials BS 63
Road Paving Materials BS 63: Part 2
Road Paving Materials BS 76
1987(1995) Specification for pavement marking paints
1981(1985) Specification for solid glass beads for use with road markingcompounds and for other industrial uses.
1998 Road marking materials. Drop on materials. Glass beads,
antiskid aggregates and mixtures of the two
1985 Road studs for trunk road
1997 Road studs for trunk road
1988 Thermoplastic road marking materials
1988 Method for sieve analysis of mineral filler for road and pavingmaterials
1982 Specification for penetration-graded asphalt cement for use inpavement construction
1987 Methods of sampling bituminous paving mixtures
Road Paving Materials ASTM Vol. 04.04 1988 Road and paving materials; travelled surface characteristics
1988 Specification for mastic asphalt (limestone fine aggregate) forroads, footways and pavings in building
1984 Bitumen road emulsions (anionic and cationic)
1984 Specification for bitumen road emulsions
1984 Code of practice for use of bitumen road emulsions
1993 Coated macadam for roads and other paved areas
1987 Road aggregates
1987(1994) Specification for singlcd-sized aggregate for surface dressing
1974(1994) Specification for tars for road purposes
AAHK,HEC,Hy,MTRC,T,W
AAHK,C,HEC,Hy,MTRC,T,W
A,AAHK,C,D,Em,H,HEC,Hy,MTRC,T,W
A
A,HEC,Hy,T,W
A,Hy,T,W
HEC,Hy,T,W
AAHKJIEGHy
A,AAHK,C,D,Em,H,HEC,Hy,T,W
A,AAHK,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
HECJ ly
A,H,HEC,Hy,T,W
AJiHECJ iyXW
A J i H E C H y X W
A,D,H,HEC,Hy,T,W
A,HEC,H>\MTRC
H
AJIECJlv
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
TS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
- 114-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
HIGHWAYS
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
Road Paving Materials HyDTC 5/89
Road Paving Materials RD/GN/002B
Road Paving Materials RD/GN/006B
Road Paving Materials RD/GN/007
Road Paving Materials RD/GN/022
Traffic Signs BS 505
Traffic Signs BS 873
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Traffic Signs
Instrument
Instrument
1989 Use of lean concrete roadbase for flexible pavements
1994 Bulk sampling of bituminous material
1997 Approval of private laboratories to perform design testing of
bituminous mix
1989 Centralised sampling and testing of bitumen
1996 Mix design of bituminous materials
1971 Specification for road traffic signals
Road traffic signs and internally illuminated bollards
1983 Methods of test
1984( 1996) Specification for miscellaneous signs
1980( 1996) Specification for internally illuminated bollards
1987( 1996) Specification for road studs
1983 Specification for internally illuminated signs and externallighting luminaries
BS 873: Part 6 1983(1996) Specification for retroreflective and non-retroreflective signs
BS 873: Part 7 1984( 1996) Specification for posts and fittings
BS 873: Part 8 1985(1996) Specification for traffic cones and cylinders
RD/GN/019 1995 Guidance Notes on Publicity board for motorists
TPDM Vol. 3 Traffic signs and road markings
TPDM Vol. 4 Road traffic signals
TPDM Vol. 6 Traffic and environmental management
ISA-S50.1 1982 Compatibility of analogue signals for electronic industrialprocess instruments
ISA-S82.03 1988 Safety standard for electrical and electronic test, measuring,controlling, and related equipment
BS 873: Parti
BS 873: Part 2
BS 873: Part 3
BS 873: Part 4
BS 873: Part 5
Hy
HEC,Hy
Hy
HEQHy
Hy
HEC,Hy,T,W
AAHK,HEC,Hy,MTRC,T,W
AAHK,HEC,Hy,MTRC,T,W
HKT
HKT
HKT
AAHK,HEC,Hy,MTRC,T,W
AAHK,H,HEC,Hy,MTRC,T,W
AAHK,HEC,Hy,MTRC,T,W
HKT
HKT
A,HEC,Hy
A,HEC,Hy,T,W
A,HEC,Hy,T,W
HEC
PSS
TS
TS
TS
PSS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
OS
TS
HEC TS
- 115-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
INSTRUMENT &CONTROL
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
Plant Simulator
ProgrammableControllers
ProgrammableControllers
ProgrammableControllers
ProgrammableControllers
Software Design
Software Design
Software Design
ISA-S77.20
IEC 1131-1
IEC 1131-2
IEC 1131-3
IEC 1131-4
IEE
IEEE 1298
IEEE 730.1
System Assessment IEC 1069-1
System Assessment IEC 1069-2
System Assessment IEC 1069-3
Colour/Chromatic Use BS 4800
Colour/Chromatic Use BS 4902
Colour/Chromatic Use BS 5252
Colour/Chromatic Use BS 5252F
1993
1992
1992
1993
1995
1990
1992
1995
1991
1993
1996
1989(1994)
1976
1976(1996)
1976(1996)
Fossil-fuel power plant simulators - functional requirements HEC
Programmable controllers - general information HEC
Programmable controllers - equipment requirements & tests HEC
Programmable controllers - programming languages
Programmable controllers - user guidelines
HEC
HEC
Guidelines for the documentation of computer software for real HECtime and interactive systems
Software quality management system - part 1: requirements HEC
IEEE guide for software quality assurance planning HEC
Industrial-process measurement and control - evaluation of HECsystem properties for the purpose of system assessment - generalconsiderations and methodology
Industrial-process measurement and control - evaluation ofsystem properties for the purpose of system assessment -assessment methodology
Industrial-process measurement and control - evaluation ofsystem properties for the purpose of system assessment -assessment of system functionality
Schedule of paint colours for building purposes
Specification for sheet and tile flooring colours for buildingpurposes
Framework for colour co-ordination for building purposes
Colour matching fan
HEC
HEC
A,AAHK,D,H,HECHKXHyXW
A.IXHECXW
AJXHECHy,T,W
A,AAHKI,)JiHECJiKXHyXW
PDS
PDS
PDS
PDS
PDS
PSS
SS
SS
PSS
PSS
PSS
OS
OS
OS
OS
- 116-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
Colour/Chromatic Use
Colour/Chromatic Use
External Works
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
Fencing/Railing
BS6150
SIS 01 91 02
BS 5262
BS 1387
BS 1485
BS 1722
BS 1722: Part 1
BS 1722: Part 10
BS 1722: Part 11
BS 1722: Part 12
BS 1722: Part 13
BS 1722: Part 14
BS 1722: Part 2
BS 1722: Part 3
BS 1722: Part 4
BS 1722: Part 5
BS 1722: Part 6
BS 1722: Part 8
BS 1722: Part 9
BS 3049
1991
1978
1991
1985(1990)
1983(1989)
1986
1990
1986
1990
1978
1992
1989
1986
1986
1986
1986
1997
1992
1976
Code of practice for painting of buildings
Natural colour system for chromatic use
Code of practice for external renderings
Specification for screwed and socketed steel tubes and tubularsand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe thread
Specification for zinc coated hexagonal steel wire netting
Specification for chain link fences
Fences - Specification for chain link fences
Specification for anti-intruder fences in chain link and weldedmesh
Specification for woven wood and lap boarded panel fences
Specification for steel palisade fences
Chainlink fences for tennis court surrounds
Specifications for open mesh steel panel fences
Specification for rectangular wire mesh and hexagonal wirenetting fences
Specification for strained wire fences
Specification for cleft chestnut pale fences
Specification for close boarded fences
Specification for wooden palisade fences
Specification for mid steel (low carbon steel) continuous barfences and hurdles
Specification for mild steel (low carbon steel) fences with roundor square verticals and flat horizontals
Specification, pedestrian guard rails (metal)
A,AAHK,D,H,HEC,Hy,MTRC,T,W
A,D,HEC,Hy,T
A,H,HEC,T
A,C,D,HEC,Hy,T,W
A,D,H,HEC,Hy,T,W
A,D,HEC,Hy,MTRC,T,W
A,AAHK,D,HEC,Hy,T,W
A,D,Hy,T,W
A,D3HEC,HyJ,W
A,D,HEC,Hy,T,W
A,D,HEC,T,W
A,D,HEC,Hy,T,W
A,D,HEC,Hy,T,W
A,D,HEC,Hy,T,W
A,D,HEC,Hy,T,W
A,D,HECsHy,T,W
A,D,HEC,Hy,T,W
A,D,HEC5Hy,T,W
A,D,HEC,Hy,T,W
A,D,HEC,Hy,T,W
PSS
OS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-117-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
Fencing/Railing
Fencing/Railing
Fencing/Railing
GroundModelling/Soiling/Cultivation
GroundModelling/Soiling/Cultivation
GroundModelling/Soiling/Cultivation
GroundModelling/Soiling/Cultivation
GroundModelling/Soiling/Cultivation
Landscape Drawings
Miscellaneous
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
BS 3987
BS4102
BS7818
BS 3882
BS 4428
BS 7370
BS 7370: Part 1
BS 7370: Part 3
BS 1192: Part 4
BS 1521
BS 7533: Part 3
ANSIA108
ASTMC1028
ASTM C 346
ASTM C 936
BS 1197: Part 2
1991 Specification for anodic oxide coatings on wrought aluminiumfor external architectural applications
1990 Specification for steel wire and wire products for fences
1995 Specification for pedestrian restraint systems in metal
1994 Specification for top soil
1989 Code of practice for general landscape operations (excludinghard surfaces)
Grounds maintenance
1991 Recommendations for establishing and managing groundsmaintenance organisations and for design considerations relatedto maintenance
1991 Recommendations for maintenance of amenity and functionalturf (other than sports turf)
1984 Construction drawing practice - recommendations for landscape
drawings
1972(1994) Specification for waterproof building papers
1997 Code of practice for laying precast concrete paving blocks andclay pavers for flexible pavementsSpecifications for Installation of Ceramic Tile
Determining Static Coefficient of Friction of Ceramic Tile andOther Like Surfaces by the Horizontal Dynamometer Pull-MeterMethod
45-deg Specular Gloss of Ceramic Materials
Specification of Solid Concrete Interlocking Paving Units
1973(1980) Specification for concrete flooring tiles and fittings - metric units
A,D,HEC,T,W
A,D,H,HEC,Hv,MTRC,T,W
A
A,HEC,Hy,T,W
A,HEC,Hy,T,W
PDS
PDS
PDS
PDS
PSS
HEC
HEC
HEC
PSS
PSS
A,HECHy/r
A,H,HEC,T
A
MTRC
MTRC
MTRC
MTRC
AJXHECJIyXW
OS
PDS
PSS
PSS
TS
PDS
PDS
PDS
- 1 1 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Biocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Paving Blocks/Tiles
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
BS 3260
BS4131
BS5931
BS 5980
BS 6717; Parti
BS 6717: Part 2
BS 6717: Part 3
BS 6826
BS 7263: Part 2
RN9
RN9A
TCA
BS 3936
BS 3936: Part 1
BS 3936: Part 10
BS 3936: Part 11
BS 3936: Part 2
BS 3936: Part 3
BS 3936: Part 4
BS 3936: Part 5
BS 3936: Part 7
BS 3936: Part 9
BS 3969
1969(1991)
1973
1980
1980(1991)
1986(1997)
1989
1987
1990
1986(1990)
1997
1992
1989(1995)
1984(1989)
1990(1995)
1990(1995)
1984(1989)
1985(1992)
1989
1987
1990
1969(1991) Specification for semi-flexible PVC (Vinyl) floor tiles
Specification for terrazzo tiles
Code of practice for machine laid in situ edge details for pavedareas
1980( 1991) Specification for adhesives for use with ceramic tiles andmosaics
1986( 1997) Precast concrete paving blocks - specification for paving blocks
Installation of Precast Concrete Paving Blocks
Precast concrete paving blocks - code of practice for laying
Specification for linoleum and cork carpet sheet and tiles
Code of practice for laying
Precast concrete paving blocks - code of practice for laying
Precast concrete unit paving system
Handbook for Ceramic Tile Installation Guidelines
Nursery stock
Specification for trees and shrubs
Specification for ground cover plans
Specification for container-grown culinary herbs
Specification for roses
Specification for fruit plans
Specification for forest trees
Specification for poplars and willows
Specification for bedding plants
Specification for bulbs, conns and tubers
Recommendation for turf for general purposes
A,H,HEC
A,D,HEC,Hy,T,W
H,HEC
A,D,HEC,Hy,T,W
A,D,HEC,Hy,MTRC,T,W
MTRC
A,D,HEC,Hy,T,W
A,D,H,HEC,T
A,D,HEC,Hy,T,W
A,D,HEC,Hy,T,W
A,D,Hy,T,W
MTRC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
PDS
PDS
PSS
PDS
PDS
PSS
PSS
PDS
PSS
PSS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 1 1 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
LANDSCAPING
MARINE WORKS
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Plants & Planting
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Play Equipment
Water Features
Water Features
Miscellaneous
BS 3998
BS 4043
BS4156
BS 5837
SILTECH
BS 1892
BS 1892: Part 1
BS 1892: Section2.10
BS 1892: Section2.7
BS 5696
BS 5696: Part 1
BS 5696: Part 2
BS 5696: Part 3
BS 7044
BS7188
BS EN 1177
BSEN913
TDD
TDD E&MGuidance Note1/92
BS 1088
1989
1989
1990
1991
1991
1986(1991)
1990
1986(1991)
1997
1986
1979
1989
1998
1996
1991
1992
1966(1988^
Recommendations for tree work
Recommendation for transplanting root-balled trees
Recommendations for peat for horticultural and landscape use
Guide for trees in relation to construction
Tree planting and maintenance in Hong Kong
Gymnasium equipment
Specification of general requirements
Specification for safety requirements for mats, mattresses andlanding areas
Specification for basketball and mini-basketball equipment
Play equipment intended for permanent installation outdoors
General safety requirements and test methods
Specification for construction and performance
Code of practice for installation and maintenance
Artificial sports surfaces
Methods of test for impact absorbing playground surfaces
Impact absorbing playground surfacing. Safety requirementsand test methods
Gymnastic equipment. General safety requirements and testmethods
Water features for open space projects in the regional councilarea
Submission of E&M design by consultants in connection withwater features and irrigation system for open space projects
1966( 1988) Specification for plywood for marine craft
A,AAHKH,HEC,T,W
HEC
HEC
HEC
HEC
A,HEC,T
AJ1ECT
A,HEC/T
A.HECT
AJ1ECT
AJIECT
AJIEC/T
A,HEC,T
A,HECT
AiiHECT
A
PSS
PSS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
TS
TS
A
AJ1ECT
A,HECT
A,AAHK,D,H,HECT
TS
[*DS
OS
PDS
- 120-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
MARINE WORKS
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Piers & Jetties
Piers & Jetties
Piers & Jetties
Piers & Jetties
Piers & Jetties
Piers & Jetties
BS 6349: Part 1
BS 6349: Part 3
BS 6349: Part 5
BS 6349: Part 6
BS 6349: Part 7
CAP 127
CAP 281
CAP 313
CAP 313
CAP 313
CAP 353
CAP 476
CAP 476
CAP 476
CED
CED
BS 4072
BS 5589
BS 6349: Part 2
BS 6349: Part 4
BS 7295
BS 7295: Part 2
1984
1988
1991
1989
1991
1984
1992
1987
1989
1988
1985,1994
1990
Maritime structures - General criteria
Maritime structures - design of dry dock, lock, slipway &shipbuilding berth, shiplift & dock & lock gate
Maritime structures - code of practice for dredging & landingreclamation
Maritime structures - design of inshore moorings & floatingstructures
Guide to the design and construction of breakwaters
Foreshore and Seabed (Reclamations) ordinance
Merchant Shipping Ordinance
Shipping and Port Control (Cargo Handling) Regulations
Shipping and Port Control Ordinance
Shipping and Port Control Regulations
Fish Culture Zone (Designation) Order
Marine Park Ordinance
Marine Reserve (Designation) Order
Marine Parks and Marine Reserves Regulation
Shore protection manual volume I & II (4th edition)
Port works manual
Wood preservation by means of copper/chromium/arseniccompositions
Code of practice for preservation of timber
Design of quay walls, jetties and dolphins
Code of practice for design of fendering and mooring system
Fusion boarded epoxy coated carbon steel bars for thereinforcement of concrete
Specification for coating with AMD 6956
AAHK,C,Hy,MTRC,T
HEC
HEC
HEC
OS
PSS
PSS
PSS
C,HEC
C,HEC
A,C,Ep,HEC,T,W
C,HEC
C,HEC
C,HEC,Hy,T
C,HEC,Hy,T
C
PSS
TR
TR
TR
TR
TR
TR
TR
TR
TR
OS
OS
PSS
PSS
PSS
PSS
PDS
PDS
- 1 2 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork ISO 2768-1
MATERIALS & TESTS Adhesives & Sealants ASTM C 1193
MATERIALS & TESTS Adhesives & Sealants ASTM C 1193
MATERIALS & TESTS Adhesives & Sealants ASTM C 509
MATERIALS & TESTS Adhesives & Sealants ASTM C 719
MATERIALS & TESTS Adhesives & Sealants ASTM C 794
MATERIALS & TESTS Adhesives & Sealants ASTM C 920
MATERIALS & TESTS Adhesives & Sealants ASTM D 4800
MATERIALS & TESTS Adhesives & Sealants ASTM D 545
MATERIALS & TESTS Adhesives & Sealants BS EN 301
MATERIALS & TESTS Adhesives & Sealants BS 1203
MATERIALS & TESTS Adhesives & Sealants BS 1204
MATERIALS & TESTS Adhesives & Sealants BS 1204: Part 1
MATERIALS & TESTS Adhesives & Sealants BS 1204: Part 2
MATERIALS & TESTS Adhesives & Sealants BS 2499
MATERIALS & TESTS Adhesives & Sealants BS 2499: Part 1
MATERIALS & TESTS Adhesives & Sealants BS 2499: Part 2
MATERIALS & TESTS Adhesives & Sealants BS 2499: Part 3
MATERIALS & TESTS Adhesives & Sealants BS 3532
1989 General tolerances - Tolerances for linear and angulardimensions without individual tolerance indications
Guide for Use of Joint Sealants
Use of Joint Sealants
1990 Specification for Cellular Elastomeric Preformed Gasket andSealing Material
Test Method for Adhesion and Cohesion of Elastomeric JointSealants under Cyclic Movement
1986 Standard Test Method for Adhesion-in-peel of Elastomeric Joint
Sealants
Specification for Elastomeric Joint Sealants
Guide for Classifying and Specifyng AdhesivesPre-formed Expansion Joint Fillers for Concrete Construction(Non-Extruding and Resilient Types
1992 Adhesives, phenolic and aminopiastic, for load-bearing timberstructures: Classification & performance requirements
1979( 1991) Specification for synthetic resin adhesives (Phenolic andaminopiastic) for plywood
1993 Specification for type MR phenolic and aminopiastic syntheticresin adhesives for wood
1979( 1991) Gap-filling adhesives
1993 Close-contact adhesives
1973 Hot-applied joint sealants for systems for concrete pavements
1993 Specification for joint sealants
1992 Code of practice for the application and use of joint sealants
1993 Methods of test
1990( 1995) Method of specifying unsaturated polyester resin system
HEC OS
MTRC PSS
MTRC PSS
A,D,HEC,MTRC,T PDS
MTRC TS
A,D,HEC,T
MTRC
MTRC
MTRC
TS
PDS
OS
PDS
A PDS
A,AAHKJ]ECilv/r PDS
AAHK,HEC,Hy PDS
A,D,H,HEC,Hy,T
A I U U i E Q T
A,AAHK,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,HEC,HyXW
liHEC
KHEC
PDS
FDS
PDS
PDS
PDS
TS
A,AAHKtD,H, HEC PSS
- 122-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
Adhesives & Sealants BS 3712
Adhesives & Sealants BS 4254
MATERIALS & TESTS Adhesives & Sealants BS 5212
MATERIALS & TESTS Adhesives & Sealants BS 5212: Part 1
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Adhesives & Sealants BS 5215
Adhesives & Sealants BS 5350
Adhesives & Sealants BS 5442
Adhesives & Sealants BS 5442: Part 1
Adhesives & Sealants BS 5442: Part 2
Adhesives & Sealants BS 5442: Part 3
Adhesives & Sealants BS 5889
Adhesives & Sealants BS 5980
MATERIALS & TESTS Adhesives & Sealants BS 6213
MATERIALS & TESTS Adhesives & Sealants BS EN 301
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Adhesives & Sealants BS EN 302
Adhesives & Sealants BS EN 302-1
Adhesives & Sealants BS EN 302-2
1994 Specification for one-part gun grade silicone-based sealants
1983(1991) Specification for two-part polysulphide-based sealants
1990 Cold poured joint sealants for concrete pavements
1990 Specification for Joint Sealants
MATERIALS & TESTS Adhesives & Sealants BS 5212: Part 2 1990
MATERIALS & TESTS Adhesives & Sealants BS 5212: Part 3 1990
Code of practice for the application and use of joint sealants
Methods of tests
1986 Specification for one-part gun grade polysulphide-based sealants
1987 Methods of test for adhesives
Classification of adhesives for construction
1989 Classification of adhesives for use with flooring materials
1989 Classification of adhesives for use with interior wall and ceiling
coverings (excluding decorative flexible materials in roll form)
1979( 1990) Adhesives for use with wood
1989 Specification for one-part gun grade silicone-based sealants1980(1991) Specification for adhesives for use with ceramic tiles and
mosaics
1982( 1992) Guide to the selection of constructional sealants
1992 Adhesives, phenolic and aminoplastic, for load-bearing timber
structure: classification and performance requirements
1992 Adhesives for load-bearing timber structures: teat methods
1992 Determination of bond strength in longitudinal tensile shear
1992 Determination of resistance to delamination (laboratory method)
H
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
A,AAHK,H,HEC,Hy,MTRC
A,H5HEC,Hy
A,HEC
H
A,D,HEC,MTRC,T
A,D,HEC,MTRC,T
A,D,HEC,Hy,T,W
H,HEC
A,H,HEC
A,D,H,HEC,MTRQT
A
A
A
A
PDS
PDS
PDS
PDS
PSS
TS
PDS
TS
OS
OS
OS
PDS
PDS
PDS
OS
PDS
TS
TS
TS
- 1 2 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Adhesives & Sealants BS EN 302-3
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS 8c TESTS
MATERIALS & TESTS
MATERIALS 8c TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS 8c TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Adhesives & Sealants
Adhesives & Sealants
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
Aggregates
BS EN 302-4
BS ISO 11600
ASTMC117
ASTMC 127
ASTM C 128
ASTMC 131
ASTM C 289
ASTM C 33
ASTM C 535
ASTM C 88
ASTM D 2922
BS 119
BS 1199&BS1200
BS 3681: Part 2
BS 3797
1992
1993
1987
1981
1981
1976
1978
1976
1976
1973
1990
1992 Determination of the effect of acid damage to wood fibres bytemperature and humidity cycling on the transverse tensilestrength
Determination of the effects of wood shrinkage on the shearstrength
Building construction - Sealants - Classification andrequirements
Test method for material finer than 75mm (no. 200) sieve inmineral aggregates by washing
Test method for specific gravity and absorption of coarseaggregate
Test method for specific gravity and absorption of fine aggregate
1981(1987) Test method for resistance to degradation of small-size coarseaggregate by abrasion and impact in the Los Angeles machine
Test method for potential reactivity of aggregates (chemicalmethod)
Concrete Aggregates
Test method for resistance to degradation of large-size coarseaggregate by abrasion and impact in the Los Angeles Machine
Test method for soundness of aggregates by use of sodiumsulphate or magnesium sulphate
Test methods for density of soil and soil-aggregate in place bynuclear method (shallow depth)
Specifications for building sands from natural sources
Specifications for building sands from natural sourcevS
concrete
Specification for lightweight aggregates for masonry units andstructural concrete
TS
A
HEC
A,C,D,Em,H,HEC,Hy,T,W
A,AAHK,C,Em,H,HEC,Hy,T,W
A9AAHK,C,Em,H,HEC,Hy,T,W
A,C,D,Em,H,Hy,T,W
A,Em,H,HEC,Hy,T,W
MTRC
A,D,Em,H,HEC,HysT,W
A,D,Em,H,HEC,Hy,MTRC,T,W
A,D,Em,H,HEC,Hy/F,W
HEC
A,AAI IK,B,D,Em,H,HEC,Hy,MTRC,T,W
A,Em,H,HEC,Hy,T
A,D,Em,H,HEC,Hy,T,W
TS
OS
TS
TS
TS
TS
TS
PDS
TS
TS
TS
PDS
PDS
TS
PDS
-124-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
BS 410 1986(1995) Specification for test sieves
BS 53: Part 2 1987(1994) Specification for singled-sized aggregate for surface dressing
BS 6100: Section 1984 (1995) Aggregates6.3
BS812
BS 812: Part 1 1975
BS 812: Part 101 1984
BS 812: Part 102 1989
BS 812: Part 103
BS 812: Part 105
BS 812: Part 106 1985
BS 812: Part 110 1990
BS 812: Part 111 1990
BS 812: Part 112 1990
Testing aggregates
Methods for determination of particle size and shape
Guide to sampling and testing aggregates
Methods for sampling
Methods for determination of particle size distribution
Methods for determination of particle shape
Method for determination of shell content in coarse aggregate
Methods for determination of aggregate crushing value (ACV)
Methods for determination often per cent fines value (TFV)
Method for determination of aggregate impact value (AIV)
A,B,C,H,HEC,W TS
HEC PDS
MTRC OS
A,AAHK,B,C,D, TS
Em,H,HEC,Hy,MTRC,T,W
A,C,H,MTRC TS
A,AAHK,C,D5Em,H TS,HEC,Hy,MTRC,T,W
A,AAHK,C,D,Em,H TS,HEC,Hy,MTRC,T,W
A,AAHK,C,D,Em,H TS,HEC,Hy,MTRC,T,W
A,AAHK,C,D,Em,H TS,HEC9Hy,MTRC,T,W
A,C,D,Em5H}HEC, TSHy,T,W
A,AAHK3C,Em,H, TSHEC,Hy,MTRC,T,W
A,AAHK,C,Ern,H, TSHEC,Hy,MTRC,T,W
A,AAHK,C,Em,H, TSHEC,Hy,MTRC,T,W
-125-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
MATERIALS & TESTS Aggregates
BS 812: Part 113 1990
BS 812: Part 117 1988
BS 812: Part 118 1988
BS 812: Part 119 1985
BS 812: Part 120 1989
BS 812: Part 121
BS 812: Part 2
BS 812: Part 4
BS812: Section103.1
BS812: Section103.2
BS 812: Section105.1
BS 812: Section105.2
BS882
BS882
1989
1975
1976
1985
1989
1989
1990
1992
Method for determination of aggregate abrasion value (AAV)
Method of determination of water-soluble chloride salts
Methods for determination of sulphate content
Determination of acid-soluble material content of fine aggregate
Methods for testing and classifying drying shrinkage ofaggregates in concrete
Methods for determination of soundness
Methods for determination of physical properties
Chemical proportions
Sieve tests
Sedimentation test
Flakiness index
Elongation index of coarse aggregate
Specification for aggregates from natural sources for concrete
Specification for aggregates from natural sources for concrete
A,AAHK,C,Em,H,HEC,Hy,MTRC,T,W
A,AAHK,C,Em,H,HEC,Hy,T,W
TS
TS
TS
A,AAHK,C,D,Em,H TS,HEC,Hy,MTRC,T,W
A,MTRC
A
TS
TS
A,AAHK,B,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,AAI IKX\D,Em,H,HEC,Hy,MTRC,T,W
A,AAI !K,C,DXm,H,HEC,Hy,MTRC,T,W
A,AAHK,C,Em,H,HEC,Hy,MTRC,T,W
A,AAHKX\EniJiHEC,Hv,MTRC,T,W
AJUUXILT
A,AAHKJU\D,Km,H,HI-X\HKT.HwMTRCXW
TS
TS
TS
TS
TS
TS
PDS
PDS
-126-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
ASTM C 136
ASTMC4125
ASTM D 113
ASTM D 1188
ASTMD 140
ASTM D 1559
ASTMD 1664
ASTMD 1754
ASTM D 2027
ASTMD 2041
ASTM D 2042
ASTMD 2171
ASTMD 2172
ASTM D 242
ASTM D 2726
ASTM D 3202
1983
1985(1986)
1989
1988(1993)
1982
1980
1987
1976(1986)
1978
1981(1985)
1985(1988)
1988
1985
1988
1983
Method for sieve analysis of fine and coarse aggregates
Test method for asphalt content of bituminous mixtures by thenuclear method
Test method for ductility of bituminous materials
Standard test method for bulk specific gravity and density ofcompacted bituminous mixtures using paraffin-coated specimens
Method for sampling bituminous materials
Test method for resistance to plastic flow of bituminous mixturesusing Marshall apparatus
Test method for coating and stripping of bitumen-aggregatemixtures
Test method for effect of heat and air on asphaltic materials(thin-film oven test)
Specification for cutback asphalt (medium - curing type)
Test method for theoretical maximum specific gravity ofbituminous paving mixtures
Test method for solubility of asphalt materials intrichloroethylene
Test method for viscosity of asphalts by vacuum capillaryviscometer
Test method for quantitative extraction of bitumen frombituminous paving mixtures
Specification for mineral filler for bituminous paving mixtures
Test method for bulk specific gravity of compacted bituminousmixtures using saturated surface-dry specimens
Testing method for percentage air voids in compacted dense andopen bituminous paving mixtures
A,AAHK,C,D,Em,H TS,HEC,Hy,T,W
A,D,Em,H,HEC, TSHy,T,W
A,AAHK,C,D,Em,H TS,HEC,Hy,T,W
HEC,Hy TS
A,AAHK,C,D,Em,H TS,HEC,Hy,T5W
A,AAHK,C,D,Em5H TS,HEC,Hy,T,W
A,D,Em,HsHEC,Hy,T,W
AAHK,HEC,Hy TS
AAHK,C,HEC PDS
A,AAHK,C,D,Em,H TS,HEC,Hy,T,W
HEQHy TS
A,AAHK,C,D,Em,H TS,HEQHy,T,W
A,AAHK,CAEm5H TS,HEC,Hy,T,W
A,AAHK,C,D5Em,H PDS,HEC,Hy,T,W
AAHK,C,HEC TS
A,AAHK,D,Em,H, TSHEC,Hy,T,W
- 127-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
MATERIALS & TESTS Asphalt/Bitumen
ASTMD3203 1988
ASTMD3289 1985
ASTMD5 1986
BS 2000
BS 2000: Part 45 1993
BS 2000: Part 47 1993
BS 2000: Part 49 1993
BS 2000: Part 58 1993
BS 3690
BS 3690: Parti 1989
BS 3690: Part 2 1989
BS3690:Part3 1990
BS434
BS 434: Part 1
1984
1984
BS 434: Part 2 1984
Test method for percent air voids in compacted dense and openbituminous paving mixtures
Test method for specific gravity or density of semi-solid andsolid bituminous material by nickel crucible
Test method for penetration of bituminous materials
Method of test for petroleum and its products
Determination of loss on heating of bitumen and flux oil
Solubility of bituminous binders
Penetration of bituminous materials
Determination of softening point of bitumen. Ring and ballmethod
Bitumens for building and civil engineering
Specification for bitumens for roads and other paved areas
Specification for bitumens for industrial purposes
Specification for mixture of bitumen with pitch, tar and Trinidadlake asphalt
Bitumen road emulsions (anionic and cationic)
Specification for bitumen road emulsions
Code of practice for use of bitumen road emulsions
HECHy
A,AAHK,C,D,Em,H,HEC,Hy,T,W
A,AAHK,C,D,Em,H,HEC,Hy,T,W
AAHK,H,HEC,Hy,MTRC
A,D,Em,I U-IEC,Hy,T,W
A,D,Em,H,HEC\Hy,T,W
AJXEmJiHECHy,T,W
AAEinJ I,HEC,Hy,T,W
HEC,W
AAHK.,H,HEC,Hy,MTRC,W
AAHKJUIKCJIy,MTRC.WV
A,n,IUH-;t\T
A,AAHK,D,Em,H,HEC,H>;MTRC.T,W
AAAHKJXBnUiHEC,Hv,MTRC\T,W
A,AAHKJIHE£;H\\MTRC
TS
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
PDS
PDS
PDS
PSS
- 128-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
Asphalt/Bitumen
BS 5284
BS594
BS 594: Part 2
BS 598: Part 100
BS 598: Part 2
BS 6577
BS 6925
HyDTC 22/97
MS-2
1976i
1992
1985
1987i
1974
1985
1988
1997
1984
Brickwork/ Blockwork ASTM C 55
Brickwork/ Blockwork BS 3056
Brickwork/ Blockwork BS 3921
Brickwork/ Blockwork BS 3921
Brickwork/ Blockwork BS 4729
Brickwork/ Blockwork BS 6649
Brickwork/ Blockwork BS 7457
Cement
Cement
ANSI A 118.4
ANSI A 118.6
1976( 1993) Methods of sampling and testing mastic asphalt used in buildingand civil engineering
Hot rolled asphalt for roads and other paved areas
Specification for the transport, laying and compaction of rolledasphalt
other paved areas - Methods for sampling for analysis
Testing
Specification for mastic asphalt for building (natural rock asphaltaggregates)
Specification for mastic asphalt for building and civilengineering (limestone aggregate)
Procedures for the approval of mix design for bituminousmaterials
The Asphalt Institute Handbook - Mix design method forasphaltic concrete and other hot-mix types
Concrete Brick
Sizes of Refractory Bricks
1985(1995) Specification for clay bricks
1985(1995) Specification for clay bricks
1990 Specification for dimensions of bricks of special shapes and sizes
1985 Specification for clay and calcium cilicate modular bricks
1994 Specification for polyurethane (PUR) foam systems suitable forstabilisation and thermal insulation of cavity walls with masonryor concrete inner and outer leaves
Latex-Portland Cement Mortar
Grout Material Specification
A,AAHK,C,D5Em,H,HEC,Hy,MTRC,T,W
HEQHy
H,HEC,Hy
AAHK
A,C,D,Em,H,Hy,T,W
A,B,D,H,HEC,Hy,T
A,AAHK,B,D,H,HEC,Hy,MTRC,T,W
Hy
A,AAHK,C,D,Em,H,HEC5Hy,T
MTRC
HEC
A,AAHK,HEC,T
A,B,C,D,Em,H,HEC,Hy,T,W
A
A
H,HEC
MTRC
MTRC
TS
PDS
PSS
TS
TS
PDS
PDS
OS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 129-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
ASTMC1019
ASTMC1090
ASTMC 150
ASTMC188
ASTM C 206
ASTM C 827
BS 1014
BS 1105
BS 12
BS 146
BS 4027
Sampling and Testing Grout
1993 Test method for measuring changes in height of cylindrical
specimens from hydraulic-cement grout
Specification for Portland Cement
1984 Test method for density of hydraulic cement
Specification for Finishing Hydrated Lime
1987 Test method for change in height at early ages of cylindricalspecimens from cementitious mixtures
1975(1992) Specification for pigments for Portland cement and Portlandcement products
1981(1994) Specification for wood wool cement slabs up to 125mm thick
1989 Specification for Portland cements
1996
1980
BS 4550: Part 0,3, 19784 , 5 & 6
BS 4550: Parti 1978
BS 4550: Part 2 1970
BS 4550: Part 3 " 1978
BS 4550: Section 19783.2
Specification for Portland blastfurnace cements
Specification for sulphate-resisting Portland cement
Methods of testing cement
Method of testing cement - sampling
Method of testing cement - chemical tests
Methods of testing cement - physical tests
Density test
MTRC
H,HEC
MTRC
AAHK,HEC,Hy
MTRC
H,HEC
A,AAHK,B,C\D,Em,H,HEC,Hy,MTRC,T
A,B,D,HEC,T
A,AAHK,B,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W
AAFIK.
A,AAHK,B,C,D,Em,H,HEC,Hy,MTRCT
H,HEC
A,C,D,Em,H,HEC,Hy,T,W
A,CD,Em,H,HECHy,W
A,AAHK,C,D,Em,H,HEC,Hy,MTRC,'I\W
TS
TS
PDS
TS
PDS
TS
PDS
PDS
PDS
PDS
PDS
TS
TS
TS
TS
TSHv,T,W
- 1 3 0 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
BS 4550: Section3.3
BS 4550: Section3.4
BS 4550: Section3.5
BS 4550: Section3.6
BS 4550: Section3.7
BS 4624
BS6319
BS 6319: Parti
BS 6319: Part 2
BS 6319: Part 3
BS 6319: Part 6
BS 6319: Part 7
BS 6432
BS 6463
BS 6463: Parti
BS 6463: Part 2
BS 6463: Part 4
BS 6699
1978 Fineness test
1978 Strength test
1978 Determination of standard consistence
1978 Test for setting times
1978 Soundness test
1970 Methods of test for asbestos-cement building products
Testing of resin and polymer/cement compositions for use inconstruction
1990 Method for preparation of test specimens
1983 Testing of resin and polymer/cement compositions for use inconstruction - method for measurement of compressive strength
1990 Methods for measurement of modulus of elasticity in flexure andflexural strength
1984 Method for determination of modulus of elasticity incompression
1985 Method for measurement of tensile strength
1984( 1990) Methods for determining properties of glass fibre reinforcedcement material
Quicklime, hydrated lime and natural calcium carbonate
1984 Methods of sampling
1984 Methods of chemical analysis
1987 Methods of test for physical properties of hydrated lime and limeputty
1992 Specification for ground granulated blastfurnace slag for usewith Portland Cement
A,C5D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
D,Em,H,Hy,T,W
H,MTRC
H,HEC
H,HEC
H,HEC
H,HEC
H,HEC
MTRC
MTRC
MTRC
MTRC
MTRC
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
TS
TS
TS
TS
Hy,MTRC PDS
- 1 3 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Cement
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
BS890 1972
BS 915: Part 2
BS EN 196-2
BS EN 196-21
BS EN 196-5
BSEN 196-7
AASHTODesignation 227-83
ACI 304
ACI 305
ACI 306
ACI 318
ASTMC 171
ASTM C 494
ASTM C 805
ASTMC 881
ASTM C 939
ASTM C 953
BA
BS 1305
1972(1983)
1995
1992
2995
1992
1979
1987
1987
1974
Specification for building limes
Specification for high alumina cement
Methods of testing cement - Chemical analysis of cement
Methods of testing cement - Determination of the chloride,carbon dioxide and alkali content of cement
Methods of testing cement - Pozzolanicity test for pozzolaniccements
Methods of testing cement - Methods of taking and preparingsamples of cement
Standard method of test for rapid determination of the chloridepermeability of concrete
Guide for Measuring, Mixing, Transporting, and PlacingConcrete
Guide for Placing Concrete in Hot Weather
Guide for Placing Concrete in Cold Weather
Building Code Requirements for Reinforced Concrete
Sheet Materials for Coring Concrete
Chemical Admixtures for Concrete
Test method for rebound number of hardened concrete
Epoxy-Resin-Base Bonding Systems for Concrete
Standard test method for flow of grout for preplaced-aggregateconcrete (Flow Cone Method)
Test method for time of setting of grouts for preplaccd-aggrcgateconcrete in laboratory
Code of practice for the Structural Use of Concrete
Specification of batch type concrete mixers
A,C,Em,H,HEC,Hy,MTRC,T,W
A,HEC
AAHK
AAHK
AAHK
AAHK
Hv
PDS
PDS
TS
TS
TS
TS
TS
MTRC PSS
MTRC
MTRC
MTRC
MTRC
MTRC
A,D,Em,H,HEC,HyXW
MTRC
A,AAHK,C,D,Em,H,HEC,Hy,T,W
H,HEC
A,B,D,HEC\T
AJLHECHv
PSS
PSS
PDS
PDS
PDS
TS
PDS
TS
TS
PSS
PDS
-132-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
BS 1881
BS 1881:
BS1881:
BS1881:
BS1881:
BS1881:
BS1881:
BS 1881:
BS1881:
BS 1881:
BS 1881:
BS 1881:
BS 1881
BS 1881
BS 1881
Part 101
Part 102
Part 103
Part 104
Part 105
: Part 106
: Part 107
: Part 108
: Part 109
: Part 110
: P a r t l l l
: Part 112
: Part 113
: Part 114
1983
1983
1993
1983
1984
1983
1983
1983
1983
1983
1983
1983
1983
1983
BS 1881: Part 115 1986
BS 1881: Part 116 1983
BS 1881: Part 117 1983
BS 1881: Part 118 1983
BS 1881: Part 119 1983
BS 1881: Part 120 1983
BS 1881: Part 121 1983
Testing concrete
Methods of sampling fresh concrete on site
Method for determination of slump
Method for determination of compacting factor
Method for determination of Vebe time
Method for determination of flow
Methods for determination of air content of fresh concrete
Method for determination of density of compacted fresh concrete
Methods of making test cubes from fresh concrete
Method for making test beams from fresh concrete
Method for making test cylinders from fresh concrete
Methods for normal curing of test specimens (20°C method)
Methods of accelerated curing of test cubes
Method for making and curing no-fines test cubes
Methods for determination of density of hardened concrete
Specification for compression testing machines for concrete
Methods for determination of compressive strength of concretecubes
Method for determination of tensile splitting strength
Method for determination of flexural strength
Method for determination of compressive strength using portionsof beam broken in flexure (equivalent cube method)
Method for determination of the compressive strength ofconcrete cores
Method for determination of static modules of elasticity incompression
A,AAHK,C,D,H,HEC,Hy,MTRC,T
H,HEC,HKT
HKT
HKT
HKT
HKT
HKT
HKT
H,HEC,HKT
HKT
HKT
H,HEC,HKT
HEC,HKT
AAHK,HKT
A,AAHK,D,H,HEC,HKT,Hy,T
AAHK,HKT
H,HKT,MTRC
HKT
HKT
A,D,H,HEC,HKT,Hy,T
HKT
HKT
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
- 1 3 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
BS 1881: Part 122 1983
BS 1881: Part 124 1988
BS 1881: Part 2 1970
BS 1881: Part 201 1986
BS 1881: Part 202 1986
BS 1881: Part 4
BS 1881: Part 5
BS 1881: Part 6
BS3148
BS4019
BS4251
BS 5075
BS 5075: Part 1
BS 5075: Part 2
BS 5075: Part 3
1970
1970
1971
1980
1974
1982
1982
1985
BS 5328
BS 5328: Part 1
BS 5328: Part 2
1991
1991
Method for determination of water absorption
Methods for analysis of hardened concrete
Methods of testing fresh concrete
Guide to the use of non-destructive methods of test for hardenedconcrete
Recommendations for surface hardness testing by reboundhammer
Methods of testing concrete for strength
Methods of testing hardened concrete for other than strength
Analysis of hardened concrete
Method of test for water for making concrete (including notes onthe suitability of the water)
Rotary core drilling equipment
Specification for truck type concrete mixers
Concrete admixtures
Specification for accelerating admixtures, retarding admixturesand water-reducing admixtures
Specification for air-entraining admixtures
Specification for superplasticizing admixtures
Concrete
Guide to specifying concrete
Method for specifying concrete mixes
A,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W
AAHK,HKT
A,D,H,HEC,Hy,T
AAHK,HKT
AAHKJ1KT
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,D,H,HEC,Hy,T
A,B,C,D,Em,H,HEC,HKT,Hy,MTRCXW
A,H,HEC,Hy,W,T
HJIEC
A,AAHK,B,C,D.Em,H,HEC,HvXW
A,AAHK3XVD,Em,H,HEC,Hy,MTRCXW
AJiHEC
A,AAHK,B,C,D,Em,H,HEC,Hv ,MTRCXW
A,AAHR,fiHEC,Hy,W
AJiHEC
A,l LHEC
TS
TS
TS
TS
TS
TS
TS
PSS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PSS
- 134-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
MATERIALS & TESTS Concrete
BS 5328: Part 3 1990
BS 5328: Part 4 1990
BS 6089 1981
BS 7542 1992
BS 8000: Part 2 1990
Specification for the procedures to be used in producing andtransporting concrete
Specification for the procedures to be used in sampling, testingand assessing compliance of concrete
Guide to assessment of concrete strength in existing structures
Method of test for curing compounds for concrete
Workmanship on building sites - Code of practice for concretework
BS8110
BS 8110: Parti
1985(1997) Structural use of concrete
BS 8110: Part 2 1985
BS 8110: Part 3 1985
CED 1994
CIRIA Report No.91
CS 1 1990
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATF.RTAT.S & TRSTS
Concrete
Finishes/Paints/Coating
Finishes/Paints/Coating
Finishes/Paints/
HKQAA
BS3761
BS381C
BS 4232
1995
1988
1967
Code of practice for design & construction
Code of practice for special circumstances
Design charts for singly reinforced beams, doubly reinforcedbeams and rectangular columns
Model specification for protective coatings for concrete
Early age thermal crack control in concrete
Construction standard - testing concrete
Quality Scheme for the Production and Supply of Concrete
Specification for solvent-based paint remover
Specification for colours for identification, coding and special H,Hypurposes
Specification for surface finish of blast-cleaned steel for painting H,HEC,Hy
A,H,HEC
A,H,HEC
A,AAHK,B,C,D,
Em,H,HEC,Hy,MTRC,T,W
H,HEC
H
A,B,C,D,Em,H,
HEC,Hy,T,W
A,B,C,D,H,HEC,HKT,MTRC,T,W
A,B,C,D,H,T,W,HEC,MTRC
A,C,D,H,HEC,MTRC,T,W
C
AAHK
A,AAHK,B,C,D,Em,H,HEC,HKT,Hy,T,W
AAHK
HEC,Hy
H,Hy
RHEC.Hv
PSS
PSS
TS
TS
PSS
PSS
PSS
PSS
PSS
PDS
PSS
TS
PDS
PDS
OS
PDS
Coating
-135 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
AAMA 603.8
AAMA 605.2
ASTM A 780
ASTM B 69
ASTM D 1730
ASTM D 2200
BS 1070
BS 1224
BS1615
BS 1706
BS 1872
BS2015
BS217
BS245
BS 2523
BS 2569
1973(1979)
1970(1996)
1987(1994)
1990(1996)
1984(1995)
1965(1985)
1961(1990)
1992
1966(1983)
1988
Voluntary Performance Requirements and Test Procedures for MTRCPigmented Organic Coatings on Extruded Aluminium
Voluntary Specification for High Performance Organic Coatings MTRCon Architectural Aluminium Extrusions and Panels.
Repair of Damaged and Untreated Areas of Hot-Dip Galvanised MTRCCoatings
Specification for Rolled Zinc MTRC
Preparation of Aluminium and Aluminium Alloy Surfaces for MTRCPainting
Pictorial Surface Preparation Standards for Painting SteelSurfaces
Specification for black paint (Tar-based)
MTRC
TS
PDS
PSS
PDS
PSS
PSS
A,AAHK,H,HEC, PDSHy,MTRC
Specification for electroplated coatings of nickel and chromium A,AAHK,D,H, PDSHEC,T
Method for specifying anodic oxidation coatings on aluminium A,AAHK,C,D,Em,H PSSand its alloys ,HEC,Hy,MTRC,T
Method for specifying electroplated coatings of zinc andcadmium on iron and steel
Specification for electroplated coatings of tin
Glossary of paint and related terms
A,AAHK,D,H, PSSHEC,HKT,MTRC,T
AAHK PDS
AAHK,H,HEC,Hy, OSMTRC
Specification for red lead for paints and jointing compounds Hy
Specification for mineral solvents (white spirit and relatedhydrocarbon solvents) for paints and other purposes
Specification for lead-based priming paints
Specification for sprayed metal coatings
HEC
A,C,D,Em,H,HEC,Hy,T
A,AAHK,D,HEC,Hy,MTRC,T,W
PDS
PDS
PDS
PDS
-136-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
BS 2569: Part 1
BS3189
BS3416
BS 3698
BS 3900
1964(1988) Protection of iron and steel by aluminium and zinc againstatmospheric corrosion
1991 (1996) Method for specifying phosphate conversion coating for metals
1991 Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water
1964( 1979) Specification for calcium plumbate priming paints
BS 3900: Part Al 1992
BS 3900: Part C2 1994
BS 3900: Part C3 1990
BS 3900: Part C5 1992
BS 3900: Part D5 1995
Methods of test for paints
Sampling
Surface-drying test (ballotini method)
Hard-drying time
Determination of film thickness
Methods of test for paints - Optical tests on paint films -Measurement of specular gloss of non-metallic paint film at 20°,60° and 85°
BS 3900: Part El 1970 Bend test (cylindrical mandrel)
BS 3900: Part E10 1979(1989) Methods of tests for paints - pull-off test for adhesion
BS 3900: Part E2 1992 Scratch test
BS 3900: Part E7 1974(1992) Resistance to impact (falling ball test)
BS 3900: Part F3 1971(1986) Resistance to artificial weathering (enclosed carbon arc)
A,H,HEC,Hy
A,AAHK,D,H,HEC,T
A,AAHK,H,HEC,HKT,Hy
AAHK,H,HEC,Hy,MTRC
C,H,MTRC
H
H
H
H
AAHK
H
C,D,Em,H,HEC,Hy,T,W
H
H
H
PDS
PDS
PDS
PDS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
-137-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
MATERIALS & TESTS Finishes/Paints/Coatings
MATERIALS & TESTS Finishes/Paints/Coatings
BS 3900: Part F4 1968(1991) Resistance to continuous salt spray
BS 3900: Part F8
BS 3900: Part H3
BS398I
BS 3987
BS4147
BS4164
BS443
BS 4479
BS 4479: Part 1
BS4641
BS 4652
BS 4756
BS 4800
1993
1983(1989)
1976(1985)
1980(1987)
1987
1982(1990)
1990
1990
Determination of resistance to humid atmospheres containingsulphur dioxide
Methods of test for paints - Evaluation of paint and varnisheffects -Designation of degree of rusting
Specification. Iron oxide pigments for paints
Specification for anodic oxidation coatings on wroughtaluminium for external architectural applications
Specification for bitumen-based hot-applied coating materialsfor protecting iron and steel, including suitable primers whererequired
H
AAHK
AAHK,H,HEC,MTRC
TS
TS
TS
PDS
A,AAHK,C,D,EmsH PDS,HEC,Hy,MTRC,T
AAHK,H,HEC,Hy, PDSMTRC\W
Specification for coal-tar-based hot-applied coating materials for AAHKJIECWprotecting iron and steel, including a suitable primer
PDS
Specification for testing zinc coatings on steel wire and forquality requirements
Design of articles that are to be coated
A,D,H,HEC,Hy, PDSMTRQT
A A R H E C H y X W PSS
Design of articles that are to be coated - generalrecommendations
1986(1996) Method of specifying electroplated coating of chromium forengineering purposes
1971(1995) Specification for metallic zinc-rich priming paint (organicmedia)
1971(1983) Specification for ready mixed aluminium priming paints for
woodwork (general principles)
1989( 1994) Schedule of paint colours for building purposes
HECHy
fiHEC
PSS
PSS
A,AAHK,C»D,Em,H PDS,HEC,Hy,MTRC,T,W
AAHKiiHy PDS
A,AAHK,Em,H, OSHECJ-IKT,MTRC\W
- 138-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Finishes/Paints/Coatings
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
BS 4842
BS 4921
BS 5082
BS 5358
BS5411
BS 5466
BS 5493
BS 6044
BS6150
1984( 1991) Specification for liquid organic coatings for application to A,AAHK,D,H,aluminium alloy extrusions, sheet and preformed sections for HEC,Texternal architectural purposes, and for the finish on aluminiumalloy extrusions, sheet and preformed sections coated with liquidorganic coatings
PDS
1988
1993
1993
Specification for sherardized coatings on iron or steel
Specification for water-borne priming paints for woodwork
A,C,D,Em,H,HEC,Hy,MTRC,T
AAHK
Specification for solvent-borne priming paints for woodwork AAHK
Methods of test for metallic and related coatings
Methods of corrosion testing of metallic coatings
1977 Code of practice for protective coating of iron and steelstructures against corrosion
1987( 1995) Specifications for pavement marking paints
BS6100: 1991Subsection 1.3.7
1991
Finishes
Code of practice for painting of buildings
AAHK
AAHK,W
A,C,D9Em,H,HEC,Hy,MTRC,T,W
C,D,Em,H,Hy,T,W
A,D,HEC,T
A,AAHK,D,H,HEC,Hy,MTRC,T
BS 6161: Part 1 1984(1995) Determination of mass per unit area (surface density) of anodic A,AAHK,D,Em,H,oxidation coatings (gravimetric method) HEC,Hy3T,W
BS 6161: Part 10 1987( 1994) Measurement of mean specific abrasion resistance with an AAHKabrasive jet test apparatus
BS 6161: Part 18 1991(1997) Determination of surface abrasion resistance AAHK
BS 6161: Part 2 1981(1994) Determination of thickness of anodic oxide coatings: non- AAHKdestructive measurement by split-beam microscope
PDS
PDS
PDS
TS
TS
PSS
PDS
OS
PSS
TS
TS
TS
TS
-139-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS.
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
MATERIALS & TESTS Finishes/Paints/Coatings
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
BS 6161: Part 3
BS 6161: Part 4
BS 6161: Part 7
BS 6161: Part 8
BS 6161: Part 9
BS 6496
BS 6497
1984(1995)
1981(1984)
1984(1995)
1981(1994)
1987(1994)
1984(1991)
1984(1991)
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
BS 6742
BS 6900
BS 6949
BS729
BS 7664
BS7719
BS 7773
1987(1992)
1991
1971(1994)
Assessment of sealing quality by measurement of the loss of massafter immersion in phosphoric-chromic acid solution
Assessment of sealing quality by measurement of the loss of massafter immersion in acid solution
Accelerated determination of light fastness of coloured anodicoxidation coatings using artificial light
Determination of the fastness to ultraviolet light of colouredanodic oxide coatings
Measurement of wear properties with an abrasive wheel wear testapparatus
Specification for powder organic coatings for application andstoving to aluminium alloy extrusions, sheet and preformedsections for external architectural purposes, and for the finish onaluminium alloy extrusions, sheet and preformed sections coatedwith powder organic coatings
Specification for powder organic coatings for application andstoving to hot-dip galvanised hot-rolled steel sections andpreformed steel sheet for windows and associated externalarchitectural
Electrostatic painting and finishing equipment using flammablematerials
Specification for raw, refined and boiled linseed oils for paintsand varnishes
Specification for bitumen-based coatings for cold application,excluding use in contact with potable water
Specification for hot dip galvanised coatings on iron and steelarticles
Specification for Undercoat and Finishing Paints
Specification for Water-borne Emulsion Paints for Interior Use
Code of Practice for Cleaning and Preparation of Metal Surfaces
A,D,Eni,H,HEC,Hy,T,W
A,D3Em,H,HEC,Hy,T,W
AAHK
AAHK
AAI IK
A,AAHK,D,HEC,MTRCT
TS
TS
TS
PDS
AAHK,H,HEC\MTRC
AAHK
A,H,HEC,Hy
A,AAHK,HEC,Hv,MTRCT
A,C,D,Em,H,HKC,Hy,MTRC,T,W
MTRC
MTRC
AAHK,MTRC
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
- 140-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS Insulating Materials BS 4840: Part 2 1994
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Finishes/Paints/Coatings
Insulating Materials
Insulating Materials
BS 8000: Part 12
BS EN 24624
BS EN ISO 1463
BS EN ISO 2064
BS EN ISO 2360
Institute ofVitreousEnamellers
PDCA
ASTMC612
BS 4840: Part 1
1993
1995
1995
1995
1982
1985
Masonry
Masonry
Masonry
Masonry
Masonry
Masonry
Masonry
Masonry
ASTMC 140
ASTMC144
ASTM C 207
ASTM C 270
ASTM C 404
ASTM C 476
ASTM C 503
ASTMC 615
Code of Practice On... Painting
Paints and varnishes. Pull-off test
Metallic and oxide coatings. Measurement of coating thickness.Microsopical method.
Metallic and other non-organic coatings. Definitions andconventions concerning the measurement of thickness
Non-conductive coatings on non-magnetic basis metals.Measurement of coating thickness. Eddy current method.
Appendix to "Atlas to Enamel Defects" Bond strength obtainedby the coat system
Painting and Decorating Contractors of America; Paint Methods MTRC
MTRC
AAHK
AAHK
AAHK
AAHK
MTRC
PSS
TS
TS
TS
TS
OS
Specification for Slag-Wool Fiber Safmg Insulation
Rigid polyurethane (PUR) foam in slab form - specification forPUR foam for use in transport containers and insulated vehiclebodies
Rigid polyurethane (PUR) foam in slab form - specification forPUR foam for use in transport containers and insulated vehiclebodies
Sampling and Testing Masonry Units
Aggregate for Masonry Mortar
Hydrated Lime for Masonry Purposes
Mortar for Unit Masonry
Aggregates for Masonry Grout
Grout for Masonry
Specification for Marble Dimension Stone
Specification for Granite Dimension Stone
MTRC
D,HEC,T
D,HEC,T
PSS
PDS
PDS
PDS
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 1 4 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Masonry
MATERIALS & TESTS Mean of Escape
MATERIALS & TESTS Metalwork
ASTM C 780
ASTM C 880
ASTM C 90
ASTM C 97
ASTM E 447,Method B
BS 5390
BS 5628: Part 1
BS 5628: Part 2
BS 5628: Part 3
BS 6073: Part I
BS 6073: Part 2
BS 6100: Part 5
BS 6270: Part 2
BS 6477
BS6515
BS8215
ACI301
ASTM A 153,Class B-2
1989
1990
1976
1981
1981
1992
1984
1991
Preconstruction and Construction Evaluation of Mortars forPlain and Reinforced Unit Masonry
Standard Test Method for Flexural Strength of Natural BuildingStone
Loadbearing Concrete Masonry Units
Test Methods for Absorption and Bulk Specific Gravity ofDimension Stone
Cornpressive Strength of Laboratory constructed MasonryPrisms
Code of practice for stone masonry
Code of Practice for Unreinforced Masonry
Code of Practice for Reinforced and Pre-stressed Masonry
Masonry Materials, Design, and Workmanship
Specification for precast concrete masonry units
Method for specifying precast concrete masonry units
Masonry
Cleaning and Surface Repair of Buildings - Concrete and precastconcrete masonry
Specification for water repellents for masonry surfaces
Specification for polyethylene damp-proof courses for masonry
Code of practice for design and installation of damp-proofcourses in masonry construction
Specifications for Structural Concrete for Buildings
Zinc Coating (Hot Dip) on Iron and Steel Hardware
MTRC
A,D,HEC,T
MTRC
A,D,HEC,T
PSS
TS
PDS
TS
MTRC TS
A,D,HEC,Hy,T,W
A,D,H,HEC,MTRCJ
AAHJIEC,MTRCJ
A,D,H,HEC,MTRCJ
A,H,HEC,MTRC
AJ1ECMTRC
A,D,HEC,Hy,T,W
MTRC
A,HEC,T,W
A
A
MTRC
MTRC
PSS
PSS
PSS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PSS
PDS
PDS
- 1 4 2 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
ASTMA653,G60(ASTM A 653M,Z180)
ASTM C 496
ASTM D 3974
BS 1004
BS 1161
BS1178
BS 1247
Specification for Steel Sheet, Zinc-Coated (Galvanized) orZinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Standard Test Method for Splitting Tensile Strength
Testing of Materials for Metal Analysis
1972(1985) Specification for zinc alloys for die casting and zinc alloy diecastings
1977(1984) Specification for aluminium alloy sections for structuralpurposes
1982 Specification for milled lead sheet for building purposes
MTRC PDS
BS 1247: Part 1 1990
BS 1247: Part 2 1990
BS
BS
BS
1295
1400
14491.15
Section
1987
1985
1991
BS 1452
BS 1470
BS 1471
1990
1987
1972
Manhole steps
Specification for galvanised ferrous or stainless steel manholesteps
Specification for plastics encapsulated manhole steps
Code of practice for training in arc welding
Specification for copper alloy ingots and copper and copper alloy
castings
Specification for cold rolled narrow strip supplied in arrange of
conditions for heat treatment and general engineering purposes
Specification for flake graphite cast iron
Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes : plate, sheet and strip
Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes - drawn tubes
MTRC
MTRC
A,AAHK,D,H,HEC,Hy,MTRC,T
A,AAHK,D,H,HEC9Hy,MTRC,T
A,AAHK,D,T5H,HEC
A,B,C,D,H,Hy,
MTRC,T,W
A,C5D,Em,H,HEC,Hy,T
A,C,D,Em,H,HEC,Hy,T5W
A,D,H,HEC,T
A,AAHK,D,H,HEC,Hy,MTRC,T,W
H
A,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W
A,C,D,Em,H5HEC,Hy,T,W
A,AAHK,C,D,Em,H,HEC,Hy5MTRC,T,W
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
- 143-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metaiwork
BS 1473
BS 1474
BS 1566
BS 1639
BS1719
BS 1724
BS 1769
BS18
BS240
BS2451
BS 2493
BS 2633
BS 2640
BS 2789
BS 2870
BS2871
BS 2871: Part 1
1995
1951
1987
1986
1963
1985
1987
1982
1985
1980
1971
1972 Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes - rivet, bolt and screw stock
1987 Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes: bars, extruded round tubes andsections
1984( 1990) Copper indirect cylinders for domestic purposes
1964( 1997) Methods for bend testing of metals
Classification, coding and marking of covered electrodes formetal-arc welding
Specification for bronze welding by gas
Specification. Unified black hexagon bolts, screws, nuts (UNC &UNF threads). Heavy series
Method for tensile testing of metals (including aerospacematerials)
Method for Brinell hardness test and for verification of Brinellhardness testing machines
1963(1988) Specification for chilled iron shot and grit
Specification for low alloy steel electrodes for manual metal-arcwelding
Specification for class 1 arc welding of ferritic steel pipework forcarrying fluids
Specification for class II oxy-acetylenc welding of carbon steelpipework for carrying fluids
Specification for spheroidal graphite or nodular graphite castiron
Specification for rolled copper and copper alloys: sheet strip andfoil
Specification for copper and copper alloys tubes
Copper tubes for water gas and sanitation
A,AAHK,C,DXn%H,HEC,Hy,MTRC,T,W
A,AAHK,CJXEm,H,HEC,Hy,MTRC,T,W
HEC,W
A,C,D,Em,H,HEC,Hy,T,W
HEC
HEC
A,Em,HEC,Hy
A,D,Em,H,HEiCI Iy,T
C,D,Em,HEC :,HvTW
HECJIy
HEC
A B C D F m HHECJIy,M!'RC,W
HEC
DJLHf-XMIv,MIRC,T,W
A,AAHK.D,H,
HKcvrMl'RC
AJXI1HECT
PDS
PDS
PDS
TS
OS
PDS
PDS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 144-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
BS 2871: Part 2 1972
BS 2872
BS 2874
BS2901
BS 2901: Parti
BS 2926
BS 3019: Parti
BS 3083
BS3410
BS 3436
BS3451
BS 3468
BS 3643
BS 3692
BS 3745
1989
1986
1983
1984
1984
1988
1961
Specification for copper and copper alloys. Tubes : Tubes forgeneral purpose
Specification for copper and copper alloys forging stock andforgings
Specification for copper and copper alloy rods and sections(other than forging stock)
Filler rods and wires for gas-shielded arc welding
Ferritic steels
Specification for chromium and chromium-nickel steelelectrodes for manual metal-arc welding
Specification for TIG welding of aluminium, magnesium andtheir alloys
Specification for hot-dip zinc coated and hot-dip aluminium/zinccoated corrugated steel sheets for general purposes
Specification for metal washers for general engineering purposes
Specification for Ingot Zinc
1973(1981) Methods of testing fusion welds in aluminium and aluminiumalloys
1986 Specification for austenitic cast iron
BS 3571: Parti 1985 Specification for MIG welding of aluminium and aluminiumalloys
ISO metric screw threads
1967 Specification for ISO metric precision hexagon bolts, screws andnuts. Metric units
1970(1988) Method for the evaluation of results of accelerated corrosion testson metal
AAHK,HEC
AAHK,W
A,AAHK,D,H,HEC,MTRC,T,W
AAHK,H
H
AAHK
A,AAHK,D,H,HEC,Hy,MTRC,T,W
A,D,H,HEC,T
AAHK,HECsHy
Hy,MTRC
A,D,H,HEC,T
A,AAHK,D,H>HEC,Hy,MTRC,T,W
A,AAHK,C,D,H,HEC,Hy,MTRC,T,W
MTRC
A,AAHK,B,C,D,Em,H,HEC,Hy,MTRC,T,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
AAHK TS
-145-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
BS 3923
BS 3923: Part 1
BS 3923: Part 2
BS 4074
BS4165
BS 4168: Parti
BS4174
BS4183
1986
1972
1982(1991)
1984
1981
1972
1967
BS4190 1967
BS427
BS 4320
BS 4345
BS 4395
BS 4395: Part 1
BS 4395: Part 2
BS 4439
BS 4464
BS 4570
1990
1968
1968(1986)
1969
1969
1969
1969(1990)
1985
Methods for ultrasonic examination of welds
Methods of manual examination of fusion welds in ferritic steels
Automatic examination of fusion welded butt joints in ferriticsteels
Specification for metal props and struts
Specification for electrode wires and fluxes for the submergedarc welding of carbon steel and medium-tensile steel
Specification for hexagon socket head cap screws
Specification for self-tapping screws and metallic drive screws
Specification for machine screws and machine screw nuts.Metric series
Specification for ISO metric black hexagon bolts, screws andnuts
Method for Vickers hardness test and for verification of Vickershardness testing machines
Specification for metal washers for general engineeringpurposes. Metric series
Specification for slotted angles
Specification for high strength friction grip bolts and associatednuts and washers for structural engineering
General grade
Higher grade bolts and nuts and general grade washers
Specification for screwed studs for general purposes. Metricseries
Specification for spring washers for general engineeringpurposes. Metric series
Specification for fusion welding of steel castings
A,B,H,HEC,Hy
A,B,H,HEC,Hy
A,B,H,HEC,Hy
A
H
AAHK,HEC,Hy,MTRC
A,D,H,I IEC,T
HKT
A,AAHK,B,H,HEC,HKT,Hy,MTRC
A3,C,D,Em,H,HEC,Hy,MTRC,T
A,AAHK,B,C,D,EmJiHECJlKT,Hy,MTRC,T,W
A,AAHK,D,H,HEC,Hy,MTRC\T
A,B,Em,H,HEC,Hy,MTRC
BJLHBQMTRC
B,HEC\MTRC
AAHK
A,AAHKJUI,HECMTRCT
HEC\H\\MTRC
IS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
POS
PDS
PDS
-146-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metaiwork
MATERIALS & TESTS Metalwork
BS 4620
BS463
BS464
BS 4677
BS 4868
BS 4870:
BS 4870:
BS 4870:
BS 4870:
BS 4870:
BS4871
BS4871:
BS4871:
BS 4872:
BS 4872:
BS 4933
Parti
Part 2
Part 3
Part 4
Part 4
Parti
Part 2
Parti
Part 2
1970(1988)
1958
1984
1972
1981
1982
1985
1988
1988
1985
1982
1982
1982
1976(1995)
1973
Specification for rivets for general engineering purposes
Specification for sockets for wire ropes
Specification for thimbles for wire ropes
Specification for arc welding of austenitic stainless steelpipework for carrying fluids
Specification for profiled aluminium sheet for building
Specification for approval testing of welding procedures - fusionwelding of steel
Specification for approval testing of welding procedures - TIG orMIG welding of aluminium and its alloys
Specification for approval testing of welding procedures : Arcwelding of tube to tube-plate joints in metallic materials
Specification for approval testing of welding procedures :Specification for automatic fusion welding of metallic materials,including welding operator approval
Specification for automatic fusion welding of metallic materials,including welding operator approval
Specification for approval testing of welders working toapproved welding procedures
Specification for approval testing of welders when weldingprocedure approval is not required - Fusion welding of steel
TIG or MIG welding of aluminium and its alloys
Specification for approval testing of welders when weldingprocedure approval is not required - fusion welding of steel
TIG or MIG welding of aluminium and its alloys
Specification for ISO metric black cup and countersunk headbolts and screws with hexagon nuts
A,AAHK,C,D,Em,H5HEC,Hy,MTRC,T,W
Hy
HKT,Hy
HEC,Hy,MTRC
A,AAHK,D,H,HEC,T
H,HEC,Hy
H,HEC
HEC
HEC
HEQHy
HEC
H,Hy
H,HEC
A,AAHK,D,H,HEC,Hy,MTRC,T
A,D,H,HEC,T
AAHK,H,HEC,Hy,MTRC
PDS
PDS
PDS
PDS
PDS
TS
TS
TS
TS
PDS
TS
TS
TS
TS
TS
PDS
-147 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
BS 497: Part 1
BS499
BS 499: Part 1
BS 499: Part 2
BS 499: Part 2C
BS5135
BS 5289
BS 6072
BS638
BS639
BS6561
BS6615
BS6681
BS 6722
BS 7084
BS709
BS729
1976
1991
1980
1980
1984
1976(1983)
1981(1986)
1986
1985(1991)
1996
1986
1992
1989
1983
1971(1994)
BS 7352 1990
Specification for manhole covers, road gully gratings and framesfor drainage purposes - cast iron and cast steel
Welding terms and symbols
Glossary for welding, brazing and thermal cutting
Specification for symbols for welding
Welding symbols
Specification for arc welding of carbon and carbon manganesesteels
Code of practice. Visual inspection of fusion welded joints
Method for magnetic particle flaw detection
Arc welding power sources, equipment and accessories
Specification for covered carbon manganese steel electrodes formanual metal arc welding
Specification for zinc alloy sheet & strip for building
Dimensional tolerances for metal and metal alloy castings
Specification for malleable cast iron
Recommendations for dimensions of metallic materials
Specification for carbon and carbon-manganese steel tubularcored welding electrode
Method for destructive testing fusion welded joints and weldmetal in steel
Specification for hot dip galvanised coatings for iron and steelarticles
Specification for strength and durability performance of metalhinges for side hanging applications and dimensionalrequirements for template drilled hinges
A,C,D,MTRC
AAHK,H,HEC,Hy
A,D,HEC,HKT,Hy,T
A,D,H,HEC,Hy,T
A,D,HEC,Hy,T
A,C,D,Em,H,I IEC,Hy,MTRC,T,W
B,H,I IEC,Hy,MTRC
B,H,HEC,Hy,MTRC
II
A,H,HEC
A A H E C T
MTRC
H,HEC,HKT,Hy,MTRC
HEC
H
HECHy
A,(.\D,Km,H,HK(\HKXHy,MTRC\T,W
A,AAHK,DJiHECT
PDS
OS
PSS
OS
OS
PSS
TS
TS
OS
PDS
PDS
PDS
PDS
PSS
PDS
TS
PDS
PBS
- 1 4 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS 8c TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
BS 7479
BS 7644
BS 7644: Part 1
BS 7644: Part 2
BS7818
BS8118
BS 8118: Parti
BS8118:Part2
BS 891: Parti
1991
1993
1993
1995
1991
1991
1991
1962
BS EN 10002-1 1990
BSEN3
BSEN
BSEN
BSEN
BSEN
BSEN
BSEN
BSEN
BSEN
BSEN
10003-1 to
1714
22553
287
287-1
287-2
288
288-1
288-2
288-3
1995
1998
1995
1992
1992
1992
1992
1992
Method for salt spray corrosion tests in artificial atmospheres
Direct tension indicators
Specification for compressible washers
Specification for nut face and bolt face washers
Specification for pedestrian restraint systems in metal
The structural use of aluminium
Code of practice for design
Specification for materials, workmanship and protection
Testing of metals
Tensile testing of metallic materials - method of test at ambienttemperature
Method for Brinell hardness test and for verification of Brinellhardness testing machines
Methods for manual examination of fusion welds in ferritic steels
Welded, brazed and soldered joints. Symbolic representation ondrawings.
Approval testing of welders working to approved weldingprocedures
Specification for approval testing of welders working toapproved welding procedures - fusion welding of steel
Approval testing of welders for fusion welding - aluminium andaluminium alloys
Approval of welding procedures for metallic materials
General rules for fusion welding
Welding procedures specification for arc welding
Welding procedure tests for the arc welding of steels
AAHK
MTRC
MTRC
MTRC
A,AAHK,Hy,MTRC
A,D,H,HEC,T
A
A,H
A3,D,Em,H,Hy,T,HEC
A,D,Em,H,HEC,Hy,T
A,D5Em,H,HyJ,W
A,B3C,D,Em5H5Hy,T,W
HKT
A
A,AAHK,D,Em,H,HEC,Hy,T,W
A,D,H,HEC,T
A
A
A
A,AAHK,D,Em,H,HEC,HyJ,W
TS
PDS
PDS
PDS
PSS
PSS
PSS
PSS
TS
TS
TS
TS
OS
TS
TS
TS
PSS
PSS
PSS
TS
- 149-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
MATERIALS & TESTS Metalwork
BS EN 288-4 1992
BS EN 485 Part 2 1995
BS EN 485 Part 3 1994
BS EN 485: Part 1 1994
BS EN 485: Part 4 1994
BS EN 499
BSEN515
1995
1993
BS EN 573: Parti 1995
BS EN 573: Part 2 1995
BS EN 573: Part 3 1995
BS EN 573: Part 4 1995
BS EN 970 1997
BS EN ISO 1479 1994
BS EN ISO 4762 1998
BS EN ISO 7049 1995
CP118 1969
ML/SFA 920
Welding procedure tests for the arc welding of aluminium and itsalloys
Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Mechanical Properties
Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Tolerances on Shape and Dimensions for Hot-Rolled Products
Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Technical Conditions for Inspection and Delivery
Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Tolerances on Shape and Dimensions for Cold-Rolled Products
Welding consumables. Covered electrodes for the manual metalarc welding of non alloy and fine grain steels. Classification
Aluminium and Aluminium Alloys, Wrought Products, TemperDesignations
Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products: Numerical Designation System
Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Chemical Symbol BasedDesignation System
Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Chemical Composition
Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Forms of Products
Non-destructive examination of fusion welds. Visualexamination
Specification for hexagon-head taping screws
Specification for hexagon socket head cap screws
Cross recessed pan head taping screws
The structural use of aluminium
Guide Specifications for Metal Lathing and Furring
A,D,H,HEC\T
HEC
HEC
HEC
HEC
A,H,HEC9Hy,T,W
HEC
HEC
HEC
HEC
HEC
A
AAHK
A
AAHK
AARHECT
MTRC
TS
PDS
PDS
PDS
PDS
OS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PSS
PDS
-150-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS 8c TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS 8c TESTS Miscellaneous
MATERIALS & TESTS
MATERIALS 8c TESTS
MATERIALS 8c TESTS
MATERIALS 8c TESTS
MATERIALS & TESTS
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
MATERIALS 8c TESTS Miscellaneous
ASTMD974 1987
BS 1336 1971(1988) Specification for knotting
Test method for neutralisation number by colour-indicatorfiltration
BS 1610 Materials testing machines and force verification equipment
BS 1610: Part 1 1992 Specification for the grading of the forces applied by materialstesting machines when used in the compression mode
BS 1610: Part 2 1985 Specification for the grading of equipment used for theverifications of the forces applied by materials testing machines
BS 1610: Part 3 1990 Specification for the grading of the forces applied by deadweight
and lever creep testing machines
BS 1726 Coil Springs
BS 1902 Methods of testing refractory materials
BS245 1976(1992) White Spirit
BS 2572 1990(1996) Specification for phenolic laminated sheet and epoxy cottonfabric laminated sheet
BS 2648 1955(1993) Performance requirements for electrically - heated laboratorydrying ovens
BS 2G 219 1983 Specification for general requirements for ground support
electrical supplies for aircraft
BS 3837 1996 Expanded polystyrene boards
BS 3964 Specification for Flexible Vulcanised Fibre Sheets
BS 476 Fire tests on building materials and structures
BS 476: Part 11 1982(1988) Method for assessing the heat emission from building materialsBS 476: Part 20 1987 Fire tests on building material and structures - Method of
determination of the fire resistance of element of construction(general principles)
BS 476: Part 21 1987 Fire tests on building material and structures - Method ofdetermination of the fire resistance of load-bearing of element ofconstruction
A,Em,H,HEC,Hy,T,W
A,AAHK,D,H,HEC,Hy,T
H5HEC,Hy,MTRC
B5H,HEC,Hy
H,HEC,Hy
H,HEC,Hy
MTRC
H
A,D,HEC,T
AAHK
B,H5HEC,MTRC
AAHK
EEC
MTRC
AAHK
MTRC
A,AAHK,BAH,HEC,MTRC,T
A,B,D,H,HEC,T
TS
PDS
TS
TS
TS
TS
PDS
TS
PDS
PDS
PDS
TR
PDS
PDS
TS
TS
TS
TS
- 151 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS Miscellaneous
MATERIALS & TESTS PFA
MATERIALS & TESTS PFA
MATERIALS & TESTS PFA
BS 476: Part 22 1987
BS 476: Part 23 1987
BS 476: Part 3 1975
Fire tests on building material and structures - Method ofdetermination of the fire resistance of non-load-bearing ofelement of construction
Method of determination of the contribution of components tothe fire resistance of a structure
External fire exposure roof test
BS 476: Part 4 1970(1984) Non-combustibility test for materials
BS 476: Part 6
BS 476: Part 7
BS 476: Part 8
BS 5080
BS 5080: Part 1
BS 5080: Part 2
BS 6443
BS7361
1989 Method of test for fire propagation for products
1987(1997) Method of test to determine the classification of the surface
1972
1993
1986
1984
1991
BS EN 438: Part 1 1991
BS EN 438: Part 2 1991
BS 3892
BS 3892: Parti 1997
BS 3892: Part 2 1984
spread of flame of products
Test methods and criteria for the fire resistance of elements ofbuilding construction
Structural fixings in concrete and masonry
Method of test for tensile loading
Method of determination of resistance to loading in shear
Method for penetrant flaw detection
Cathodic protection
Decorative high-pressure laminates (HPL) sheets based onthermosetting resins
Decorative high-pressure laminates (HPL) sheets based onthermosetting resins - determination of properties
Pulverised-fuel ash
Specification for pulverised-fuel ash for use with Portlandcement
Specification for pulverised-fuel ash for use in grouts and formiscellaneous uses in concrete
A,B,E),H,HEC,T
A,B,D,H,T
A,AAHK3JIHECJ
A,B,DJiHEC,MTRC/F
AAHK,MTRC
A,AAHKJ3JiHEC,MTRC,T
A,D,H,HEC,T
H
H
H
H,My,MTRC
A,Em,Ep,H,HECMy,T,W
A,D,H,HECVT
A.D.H.HECT
A,BX:,D,Em,liHv,T,W
HECJ-iy.MTRC.T.w
TS
TS
TS
TS
TS
TS
TS
PDS
TS
TS
TS
PSS
PDS
TS
PDS
PDS
PDSIVW
- 152-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
BS6588 1996
BS 892: Part 2 1996
WBTC 14/94 1995
MATERIALS & TESTS PFA BS 3892: Part 3 1997
MATERIALS & TESTS PFA
MATERIALS & TESTS PFA
MATERIALS & TESTS PFA
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
AASHTODesignation M252
ANSI/API 1104
ANSI/API 1107
ASTM D 3350
ASTMF714
BS1196
BS 1387
1981
1993
1997
1989
1985(1990)
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
Hy
BS 143 & 1256 1986
MATERIALS & TESTS Pipes & Fittings BS 1710 1984(1991)
BS 1740: Parti 1971(1990)
MATERIALS & TESTS Pipes & Fittings BS21 1985
MATERIALS & TESTS Pipes & Fittings BS 2494 1990
MATERIALS & TESTS Pipes & Fittings BS 2760 1973
Specification for pulverised-fuel ash for use in cementitious Agrouts
Specification for Portland pulverised fuel ash cement
Specification for pulverized-fiiel ash to be used as type 1 addition
Use of PFA as general fill in reclamation
Standard specification for corrugated polyethylene drainagetubing
Welding of pipelines and related facilities
Pipeline maintenance welding practices
Standard specification for polyethylene plastics pipe and fittingsmaterials
Standard specification for polyethylene (PE) plastic pipe (SDR-PR) based on outside diameter
Specification for clayware field drain pipes and junctions
Specification for screwed and socketed steel tubes and tubularsand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads
Specification for malleable cast iron and cast copper alloythreaded pipe fittings
Specification for identification of pipelines and services
Specification for wrought steel pipe fittings (screwed BS 21 R-series thread): metric units
Specification for pipe threads for tubes and fittings wherepressure - tight joints are made on the threads (metricdimensions)
Specification for elastomeric seals for joints in pipework andpipelines
Specification for pitch-impregnated fibre pipes and fittings forbelow and above ground drainage
PDS
A,B,H,HEC,MTRC
HEC
C5Ep
A,C,D,Em,H,HEC,Hy,T,W
HEC
HEC
Hy
PDS
PDS
PSS
PDS
PSS
PSS
PDS
PDS
A5D,HEC,Hy,T,W
A,C,D?Em,HsHEC,HKT,Hy,MTRC,T,W
A,D,H,HEC,MTRC,T
A,AAHK,Em,H,MTRC
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H3HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC5
Hy,T
PDS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
- 1 5 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
BS 2779
BS 2782: Part 10
BS3416
BS 3505
BS 3506
BS 3600
BS3601
BS 3974
BS4147
1986
1991
1986
1986
1987(1993)
1980(1987)
BS416
BS 416: Parti
BS 4346
BS 4346: Part 1
BS 4346: Part 2
BS 4346: Part 3
BS437
1990
1990
1969
1970
1982
1978
Specification for pipe threads for tubes and fittings wherepressure-tight joints are not made on the threads (metricdimensions)
Glass reinforced plastics
Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water
Specification for unplasticized polyvinyl chloride (PVC-U)pressure pipes for cold potable water
Specification for unplasticised PVC pipe for industrial uses
Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes
Specification for carbon steel pipes and tubes with specifiedroom temperature properties for pressure purposes
Specification for pipe supports
Specification for bitumen-based hot applied coating materials forprotecting iron and steel, including suitable primers whererequired
Discharge and ventilating pipes and fittings, sand-cast or spun incast iron
Specification for spigot and socket systems
Joints and fittings for use with unplasticized PVC pressure pipes
Injection moulded unplasticized PVC fittings for solventwelding for use with pressure pipes, including potable watersupply
Mechanical joints and fittings, principally of unplasticized PVC
Specification for solvent cement
Specification for cast iron spigot and socket drain pipes andfittings
HKT PDS
HEC,Hy
A,C,D,Em,Hiiv,T
A,C,D,Em,H,Hy,T,W
A,C,D,H,HKT,HEC,Hy,MTRC,T
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,T,W
AAHK
A,B,D,H,HEC,T,W
HECHy,MTRC\W
A,D,H,HEC,T
A,C,D,ErruIiHEC,Hy,MTRC,T,W
A,C,D,Em,H,HECHy,MTRC;i;W
A,C,D,Em,H,HEC\Hy,MTRGT,W
A,C\D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,IIEC\Hv,MTRC,T,W
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-154-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Pipes & Fittings BS 4504
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings BS 4660
MATERIALS & TESTS Pipes & Fittings BS 4772
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings BS 4962
BS 4504: Part 1
BS 4504: Part 2
BS 4504: Part 3
BS 4504: Section3.1
BS 4504: Section3.2
BS 4504: Section3.3
BS4514
BS4515
BS 4622
1969
1974
1989
1989
1989
1983
1984
1970(1983)
BS 4865 1989
BS 4865: Parti 1989
BS 4865: Part 2 1989
BS 4865: Part 3 1989
BS 4865: Part 4 1989
1989 Circular flanges for pipes, valves and fittings (PN designated)
Ferrous
Copper alloy and composite flanges
Steel, cast iron and copper alloy flanges.
Circular flanges for pipes, valves and fittings (PN designated) -Specification for steel flanges
Specification for cast iron flanges
Specification for copper alloy and composite flanges
Specification for unplasticized PVC soil and ventilating pipes,fittings and accessories
Specification for welding of steel pipelines on land and offshore
Specification for grey iron pipes and fittings
1989 Specification for unplasticized polyvinyl chloride (PVC-U)pipes and plastics fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage
1988 Specification for ductile iron pipes and fittings
Dimensions of gaskets for flanges to BS 4504
Specification for non-metallic flat gaskets (including gaskets forflanges to BS 4772)
Specification for spiral wound gaskets for use with steel flanges
Specification for non-metallic envelope gaskets
Specification for corrugated, flat or grooved metallic and filledmetallic gaskets for use with steel flanges
1989 Specification for plastics pipes and fittings for use as subsoilfield drains
A,C,D,H,HEC,MTRC,T5W
A,D,H,HEC,T
A,D,H,HEC,T
MTRC
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
HEC,MTRC,W
HEC,W
A,D,H,HEC,Hy,MTRC,T,W
HEC,Hy,MTRC
A,B,C,D,Em,H,HEC,Hy,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,D,H,HEC,T5W
A,D,H,HEC,Hy,MTRC,T,W
A,D,H,HEC,T,W
A5DSH,HEC,T,W
A,D,H,HEC,T,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
A,H PDS
- 155-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS <& TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
MATERIALS & TESTS Pipes & Fittings
BS 5255 1989
BS 534 1990
BS5911
BS 5911: Parti 1981
BS 5911: Part 100 1988
BS 5911: Part 101 1988
BS 5911: Part 110 1992
BS 5911: Part 114 1992
BS 5911: Part 120 1989
BS 5911: Part 2 1982
BS 5911: Part 200 1994
BS 5911: Part 3 1982
BS 6087
BS 6437
BS65
1990
1984
1988
Specification for thermoplastics waste pipe and fittings
Specification for steel pipes, joints and specials for water andsewage
Precast concrete pipes, fittings and ancillary products
Specification for pipes and fittings with flexible joints andmanholes
Specification for unreinforced and reinforced pipes and fittingswith flexible joints
Specification for glass composite concrete (GCC) pipes andfittings with flexible joints
Specification for ogee pipes and fittings (including perforated)
Specification for concrete porous pipes
Specification for reinforced jacking pipes with flexible joints
Specification for inspection chambers
Specification for unreinforced and reinforced manholes andsoakaways of circular cross section
Specification for pipes and fittings with ogee joints
Specification for flexible joints for grey or ductile cast irondrainpipes and fitting (BS 437) and for discharge and ventilatingpipes and fittings (BS 416)
Specification for polyethylene pipes in metric diameters forgeneral purposes
Specification for vitrified clay pipes, fittings and ducts, alsoflexible mechanical joints for use solely with surface water pipesand fittings
A,C,D,Em,H,Hy,T
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,T
A,C,D,Em,H,HEC,Hy,MTRCJ,W
A,D,H,HEC,Hy,T
A,C,D,Em,H,HEC,Hy,T,W
A,D,H,HEC,Hy,MTRC,T,W
A,C,D,I I,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,MTRC\T,W
A»C,D,Em,H,HEC,Hy,MTRCJ,W
A3,C,D,Em,H,HECHyXW
A,H,HEC,T
A,D,H,HEC,T
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
- 156-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Pipes & Fittings
Plaster/Plasterwork
BS8010
BS879
BS EN 1092-2
BS EN 1514
BS EN 1514-1
BSEN 1514-2
BS EN 1514-3
BSEN 1514-4
BSEN 1561
BS EN 545
DIN 8074
DIN 8075
DW/142
DW/144
DW/151
DW/191
ISO 161
BS4551
1997
1997
1997
1997
1997
1997
1997
1995
1987
1987
1982
1982
1984
1982
1980
Plaster/Plasterwork ANSI A 118.3
Plaster/Plasterwork ASTM C 1063
MATERIALS & TESTS Plaster/Plasterwork ASTM C 28
Code of practice for pipelines
Water well casing
Specification for cast iron flanges
Flanges and their joints. Dimensions of gaskets for PN-designated flanges
Non-metallic flat gaskets with or without inserts
Spiral wound gaskets for use with steel flanges
Non-metallic PTFE envelope gaskets
Specification for non-metallic flat gaskets (including gaskets forflanges to BS 4772)
Specification for flake graphite cast iron
Ductile iron pipes, fittings, accessories and their joints for waterpipelines. Requirements and test methods
High-density polyethylene (PE-HD) pipes; dimensions
High-density polyethylene (PE-HD) pipes; general qualityrequirements-testing
Specification for sheet metal ductwork
Specification for sheet metal ductwork
Specification for plastic ductwork
Code of practice for resin-bonded glass fibre ductwork
Thermoplastics pipes for the transport of fluids - nominal outsidediameters and nominal pressures
Methods of testing mortars, screeds and plasters
Epoxy Resin Mortar Setting Material
Specification for Installation of Lathing and Furring to ReceiveInterior and Exterior Portland Cement-Based Plaster
Specification for Gypsum Plasters
MTRC
A,HEC
W
A,D,H,T,W
A,D,H,T,W
A,D,H5T,W
A,D,H,T,W
A,D,H,T,W
A,C,D,H,T,W
A,C,D,EmsH,Hy,T,W
D,H,HEC,MTRC,T
D,H,HEC,T
AAHK,HEC, MTRC
A,D,Em,H
A,D,Em
A,D,Em,H
D,H,HEC,T
A,AAHK,C5D,Em,H,HEC,Hy,MTRC,T,W
MTRC
MTRC
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
TS
PDS
PSS
MTRC PDS
-157-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
Specification for Inorganic Aggregates for Use in Gypsum MTRCPlaster
Test Methods for Physical Testing of Gypsum, Gypsum Plasters MTRCand Gypsum Concrete
Specification for Installation of Interior Lathing and Furring MTRC
Specification for Application of Interior Gypsum Plaster MTRC
Specification for Metal Lath MTRC
Specification Aggregate for Job-Mixed Portland Cernent-Based MTRCPlaster
Specification for Application of Portland Cement-Based Plaster MTRC
1973(1994) Specification for gypsum building plasters A,B,C,D,Em,H,HECfHy,T,W
MATERIALS & TESTS Plaster/Plasterwork BS 1191: Parti 1973(1994) Excluding premixed lightweight plasters A,AAHK,B,C,D,Em,H,HECHy,MTRCXW
MATERIALS & TESTS Plaster/Plasterwork BS 1191: Part 2 1973(1994) Premixed light weight plasters A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
1985( 1994) Gypsum plasterboard - Specification for plasterboard excluding A,B,D,H,HEC,Tmaterials submitted to secondary operations
1987(1994) Steel lathing for internal plastering and external rendering HECJiy
1994 Specification for expanded metal and ribbed lathing A,AAHK,D,H,HEC,Hy,MTRC,T
1975 Specification for thick PVC sheeting (calendered, flexible, DJ1ECT
unsupported)
1978(1990) Specification for rigid PVC sheet DJIECT
1998 Methods of testing mortars, screeds and plasters - determination A,H,HECof flow
1991 Code of practice for external renderings A,D,H,HEC,T
1989( 1997) Specification for poly vinyl acetate (P VAC) emulsion bonding A,D,HEC,Tagents for indoor use with gypsum building plasters
TYPE
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
ASTM C 35
ASTM C 472
ASTM C 841
ASTM C 842
ASTM C 847
ASTM C 897
ASTM C 926
BS 1191
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
BS 1230: Part 1
BS 1369
BS 1369: Part 1
BS 2739
BS 3757
BS 4551: Section12
BS 5262
BS 5270: Part 1
PDS
TS
PDS
PSS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PSS
PDS
- 1 5 8 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Plaster/Plasterwork BS 5492 1990 Code of practice for internal plastering
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Plaster/Plasterwork
Plaster/Plasterwork
Plaster/Plasterwork
Plaster/Plasterwork
Plaster/Plasterwork
Plaster/Plasterwork
Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS Plaster/Plasterwork
MATERIALS & TESTS
MATERIALS & TESTS
Plaster/Plasterwork
Plaster/Plasterwork
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
BS 6100: Part 6
BS 6100: Section6.1
BS6100:Subsection 6.6.2
BS6100:Subsection 6.6.2
BS 6452: Part 1
BS 8000: Part 10
BS 8000: Part 8
BS 8000: Part 9
BS 8204: Part 1
BS 8204: Part 2
BS8212
ASTM D 638
BS 1763
Plastics
Plastics
Plastics
BS 2782
BS 2782: Part 1
BS 2782: Part 3
Concrete & plaster
1984(1995) Binders
1990 Glossary of building and civil engineering terms: Plaster
1990 Plaster
1984(1994) Beads for internal plastering and dry lining: specification forgalvanised steel beads
1995 Workmanship on building sites: code of practice for plasteringand rendering
1994 Workmanship on building sites: code of practice for plasterboardpartitions and dry linings
1989 Workmanship on building sites: code of practice for cement/sandfloor screeds and concrete floor toppings
1987 Code of practice for concrete bases and screeds to receive in-situflooring
1987 Code of practice for concrete wearing surfaces
1995 Code of practice for dry lining and partitioning using gypsumplasterboard
1987 Test method for tensile properties of plastics
1975 Specification for thin PVC sheeting (calendered, flexible,
unsupported)
Methods of testing plastics
Methods of testing plastics : thermal properties
Methods of testing plastics : Mechanical properties
A,D,H,HEC,MTRC,T
A3D,HEC,Hy,T,W
D,HEC,T
D,T
D,HEC,T
AAHEQMTRQT
D,HEC,MTRC,T
A,D,HEC,T
D,HEC,MTRC,T
D,H,HEC,MTRCJ
A,D,H,MTRC,T
A,HEC,T
A,D,Em,Ep,H,HEC,
Hy,W
D,HEC,T
HEC,Hy,MTRC
Em
A,C,D9Em,H,HEC,Hy,MTRC,T,W
PSS
PDS
OS
OS
OS
PDS
PSS
PSS
PSS
PSS
PSS
PSS
TS
PDS
TS
TS
TS
- 1 5 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Plastics
MATERIALS & TESTS Prestressing
MATERIALS & TESTS Prestressing
MATERIALS & TESTS Prestressing
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Reinforcement
BS 2782: Part 4 1983
BS 2782: Part 6 1980
Methods of testing plastics : Chemical properties
Methods of testing plastics : Dimensional properties
BS 4154: Part 1 1985(1994) Specification for material and performance requirements
BS 4154: Part 2 1985(1994) Specification for profiles and dimensions
BS 4203 1980( 1994) Extruded rigid PVC corrugated sheeting
Specification for performance requirements
Specification for profiles and dimensions
Guide to the preparation of a scheme to control the quality ofglass reinforced polyester mouldings
Specification for high density polythene sheet for generalpurposes
Laboratory methods of test for determination of smokegeneration characteristics of cellular plastics and cellular rubbermaterials
Specification for the performance of prestressing anchorage forpost-tensioned construction
Specification for hot rolled and hot rolled and processed hightensile alloy steel bars for the prestressing of concrete
Specification for high tensile steel wire and strand for theprestressing of concrete
Specification for Steel Welded Wire Fabric, Plain, for ConcreteReinforcement
Deformed and Plain Billet-Steel Bars for ConcreteReinforcement
Specification for epoxy-coated reinforcing steel bars
Specification for Steel Wire, Plain, for Concrete Reinforcement
BS 4203: Part 1
BS 4203: Part 2
BS 4549: Part 1
BS 4646
BS 5111
BS 4447
BS 4486
BS 5896
ASTMA185
ASTMA615&ASTMA615M
ASTM A 775M
ASTM A 82
1980(1994)
1980(1994)
1970
1970(1982)
1974(1983)
1973(1990)
1980
1980
1991
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
AAHK
AAHK
A,AAHK,D,H,HEC.T
AAHK
AAHK
HEC,Hy
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
D,Em,H,HEC,Hy,W PDS
A,D,Em,H
A,C,HEC\H>\MTRC
A,B,C,HEC,Hy,MTRC
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
MTRC
MTRC
CHECHy/T
MTRC
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-160-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Reinforcement BS 4449
MATERIALS & TESTS Reinforcement BS 4466
MATERIALS & TESTS Reinforcement BS 4482
MATERIALS & TESTS Reinforcement BS 6744
MATERIALS & TESTS Reinforcement BS 7123
MATERIALS & TESTS Reinforcement BS 7295
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Reinforcement
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock ISRM
MATERIALS & TESTS Rock ISRM
MATERIALS & TESTS Rock ISRM
MATERIALS & TESTS Rock ISRM
BS 7295: Part 1 1990
BS 7295: Part 2 1990
CS 2 1995
ASTMD2845 1990
ASTMD2938 1986
ASTMD3148 1986
1988 Specification for carbon steel bars for the reinforcement ofconcrete
1989 Specification for scheduling, dimensioning, bending and cuttingof steel reinforcement for concrete
1985 Specification for cold reduced steel wire for the reinforcement ofconcrete
1986 Specification for austenitic stainless steel bars for thereinforcement of concrete
1989 Specification for metal arc welding of steel for concretereinforcement
Fusion bonded epoxy coated carbon steel bars for thereinforcement of concrete
Specification for coated bars
Specification for coatings
Construction standard - carbon steel bars for the reinforcement ofconcrete
Determination of Young's modulus and Poisson's ratio bymeasuring the pulse velocities (Method (1))
Test method for unconfined compressive strength of intact rockcore specimens
Standard test method for elastic moduli of intact rock corespecimens in uniaxial compression
1981 Determination of dry density and porosity (using saturation andbuoyancy techniques)
1981 Determination of indirect tensile strength by the Brazil test(method (1))
1981 Determination of schmidt rebound hardness (by schmidt impacthammer)
1981 Determination of slake-durability index
C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
H
H5Hy
H9MTRC
C5H,MTRC
H,MTRC
A,B,C,D,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A5C,Em,H,HEC,Hy,T,W
A3C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
TS
TS
TS
TS
TS
TS
- 1 6 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rock
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
ISRM
ISRM
ISRM
ISRM
1981
1981
1981
1981
ISRM
ISRM
ISRM
BS 3650
1981
1981
1985
ASTMC 1115
ASTMC1166
ASTM C 542
ASTM C 864
ASTM D 2000
BS1154
BS 1155
BS 2752
BS 3472
1990
1986
1986
1986
1990
1974
1970
Determination of uniaxial compressive strength of core
Determination of water content
Determination of young's modulus in uniaxial compression ofcore
Robertson shear box test
Rock characterisation testing & monitoring
Velocity of sound in rock
Determination of point load strength index by (a) diametral test,(b) axial test, (c) block and irregular
Dense Elastomeric Silicone Rubber Gaskets and Accessories
Flame Propagation of Dense and Cellular Elastomeric Gasketsand Accessories
Lock-Strip Gaskets
Specification for Dense Elastomeric Compression Seal Gaskets,Setting Blocks and Spacers
Classification system for rubber products in automobileapplication
Specification for natural rubber compounds
Specification for natural rubber compounds for extrusion
Specification for chloroprene rubber compounds
Specification for styrene-butadiene rubber (SBR) - non-pigmented, emulsion polymerized, general purpose types (1500series)
Specification for oil-extended styrene-butadiene rubbers (SBR)Non-pigmented, emulsion polymerized general purpose types(1700 series)
A,C9Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em9H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
A,C,Em,H,HEC,Hy,T,W
MTRC
MTRC
MTRC
A,D,HEC,MTRC,T
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
PDS
PDS
QHEC OS
HEC,Hy
HEC,Hy,MTRC
HEQHy
HEQHy
PDS
PDS
PDS
PDS
HEQHy PDS
-162-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
BS 4255: Part 1
BS 4396
BS67I6
BS903
BS 903: Part Al
BS 903: Part A16
BS 903: Part A18
BS 903: Part A19
BS 903: Part A2
BS 903: Part A26
BS 903: Part A3
BS 903: Part A4
BS 903: Part A43
BS 903: Part A5
BS 903: Part A6
BS 903: Part A9
BS 903: Part C2
BS921
BS ISO 5659
1986(1992)
1976
1980(1988)
1987(1995)
1973(1985)
1986(1995)
1989
1969
1982
1990(1995)
1990(1995)
1974
1969
1988(1995)
1982(1995)
1976(1994)
1994
Specification for non-cellular gaskets
Raw material rubber
Guide to Properties and Types of Rubber
Physical testing of rubber
Determination of density
Determination of the effect of liquids
Determination of equilibrium water vapour absorption
Heat resistance and accelerated ageing tests
Determination of tensile stress-strain properties
Determination of hardness
Determination of tear strength (trouser, angle and crescent testpieces)
Determination of compression stress-strain properties
Method for determination of resistance to ozone cracking (staticstrain test)
Determination of tension set
Determination of compression set after constant strain
Determination of abrasion resistance
Determination of volume resistivity
Specification. Rubber mats for electrical purposes
Plastics. Smoke generation
H.MTRC
HECHy
MTRC
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,RHEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
C,HEC,Hy,MTRC
A,C,D,Em,H,HEC,Hy,MTRC,T,W
C,HEC,Hy,MTRC
A,C,D,Em,H,HEQHy,MTRC,T?W
A,C,D,Em,H,HEC,Hy,MTRC,T,W
C,HEC,Hy,MTRC
A,AAHK,D,Em
A,Em
PDS
PDS
PDS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
-163-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Rubber
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
BS ISO 5659-2 1994 Determination of specific optical density
ISO 188 Rubber - Vulcanized - Accelerated ageing or Heat resistance Test
ISO 2230 Vulcanized Rubber - Guide to Storage
ISO 247 Elongation test for rubber
ISO 37 Rubber - Vulcanized - Determination of tensile stress- strainproperties
ISO 7619 Rubber - Determination of indentation hardness by means ofpocket hardness meters
APHA 427 1985 Determination of total sulphide content
Test method for direct shear test of soils under consolidateddrained conditions
ASTM D 854 1983 Test method for specific gravity of soils
BS 1377 Methods of Test for Soils for Civil Engineering Purposes
ASTM D 3080 1972
BS 1377: Parti 1990
BS 1377: Part 2 1990
BS 1377: Part 4 1990
BS 1377: Part 5 1990
BS 1377: Part 6 1990
BS 1377: Part 7 1990
BS 1377: Part 9 1990
CED 1982
GEO
GEO
General requirements and sample preparation
Classification tests
Compaction-related tests
Compressibility, permeability and durability tests
Consolidation and permeability tests in hydraulic cells and withpore pressure measurement
Shear strength tests (total stress)
In-situ tests
CED manual, soil lab. Vol. 2 - Vane shear test
1988 Geoguide 3 - Guide to rock and soil descriptions
1989 Geospec 2 - Large shear box of 300 mm square
A,Em
MTRC
MTRC
MTRC
MTRC
MTRC
A,C,Em,H,HEC,Hy,T,W
A,C,D,Em,H,HEC,Hy,T,W
QHEC
A,AAHK,C,D,H,HEC,HKT,Hy,MTRC,T,W
H5HEC,HKT
HKT
H,HKT
H,HKT
HKT
H
AAHK,HKT
A,C,D,Em,H,Hy,T,W
A,AAHK,B9C5D5H,HEC,Hy,T,W
C,D,Em,H,HEC,Hy,T
TS
TS
PSS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
OS
OS
-164-
Construction Standards Used in Hong Kong (DeceMber 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
GEO Report No.36 Test 2.3.2A
GEO Report No.36Test2.3.2B
GEO Report No.36 Test 2.3.2C
GEO Report No.36 Test 2.4.3
GEO Report No.36 Test 2.5.3
GEO Report No.36Test2.9.2A
GEO Report No.36Test2.9.2B
GEO Report No.36Test2.9.4A
GEO Report No.36 Test 2.9.4B
GEO Report No.36Test2.9.5A
GEO Report No.36Test2.9.5B
GEO Report No.36 Test 2.9.6
GEO Report No.36 Test 3.5.5
GEO Report No.36Test4.3.3A
1996
1996
1996
1996
1996
1996
1996
1996
1996
1996
1996
1996
1996
1996
Determination of moisture content by over-drying at 105 degreeC+/- 5 degree C
Determination of moisture content by over-drying at 45 degree C+/- 5 degree C
Comparative test for the determination of moisture content byoven-drying
Determination of liquid limit by the cone penetrometer method
Determination of plastic limit, plasticity index and liquidityindex
Determination of particle size distribution by west sieving (withdispersant)
Determination of particle size distribution by west sieving(without dispersant)
Determination of particle size distribution by the pipette method(with dispersant)
Determination of particle size distribution by the pipette method(without dispersant)
Determination of particle size distribution by the hydrometermethod (with dispersant)
Determination of particle size distribution by the hydrometermethod (without dispersant)
Construction of a continuous particle size distribution curvefrom the results of wet-sieving and sedimentation tests
Determination of the total sulphate content of soil and thesulphate content of ground water and of aqueous soil extracts bythe gravimetric method
Determination of the dry density/moisture content relationship ofsoils containing particles which are not susceptible to crushing(using a lOOOcc mould and 2.5kg rammer)
C,D,Em,H,HEC,Hy,T
C,D,Em,H,HEC,Hy,T
C,D,Em,H,HEC,Hy,T
CD,Em,H,HECHy,T
C,D,Em,H,HEC,Hy,T
C,D,Em,H,HEC,Hy,T
C,D,Em,H,HEC,Hy,T
C,D,Ern,H,HEC,Hy,T
C,D,Em,H,HEC,Hy,T
C,DJEm,H,HECs
Hy,T
C,D,Em,H,HEC,Hy,T
C,D,Em,H,HEC,Hy.T
C,D,Em,H,HEC,Hy,T
CJD,Em9H,HEC,HyJ
TS
TS
TS
TS*
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
-165-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Soils
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
GEO Report No. 199636Test4.3.3B
GEO Report No. 199636 Test 4.3.4A
GEO Report No. 199636 Test 4.3.4B
GEO Report No. 199636 Test 9.2.1
GEO Report No. 199636 Test 9.2.2
GSCEW 1992
GSCEW 1992
GSCEW 1992
GSCEW 1992
ASTM A 307,Grade A & ASTMF 568, PropertyClass 4.6
ASTM A 366 &ASTM A 366M
ASTM A 53 1997
ASTM A 563 &ASTM A 563M
Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, TSsoils containing particles which are susceptible to crushing Hy,T(using a lOOOcc mould and 2.5kg rammer)
Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, j gsoils containing particles which are not susceptible to crushing Hy,T(using a CBR mould and 2.5kg rammer)
Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, TSsoils containing particles which are susceptible to crushing Hy,T(using a CBR mould and 2.5kg rammer)
Determination of the insitu bulk density and insitu dry density of C,D,Ern,H,HEC, j §soil by the sand replacement method suitable for fine- and Hy,Tmedium-grained soils (with small pouring cylinder)
Determination of the insitu bulk density and insitu dry density of C,D,Em,H,HEC, TSsoil by the sand replacement method suitable for fine-, medium Hy,Tand coarse soils (with large pouring cylinder)
Hilf method of optimum moisture content and maximum dry CSHEC TS
density
Microwave oven drying method C,HEC TS
GEO probe test
Test method for the determination of the in-situ bulk density andthe in-situ dry density of fine grained and medium grained soilsby the nuclear densometer methods
Carbon Steel Bolts and Stud, 60000 psi Strength. Standard MTRCspecification for carbon and alloy steel externally threaded metricfasteners
A,C,D,Em,H,HEC, TSHy,T,W
A,C,D,Em,H,HEC, TSHy,T,W
Steel, Sheet, Cold-Rolled, Commercial Quality MTRC
Standard specification for pipe, steel, black and hot-dipped, Hyzinc-coated, welded and seamless
Carbon and Alloy Steel Nuts MTRC
PDS
PDS
PDS
PDS
- 166-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
MTRC
Hy
MTRC
MTRC
MTRC
MTRC
B
HKT,Hy,MTRC
A,D,H,HEC,T
A,C,D,Em,H,HEC,Hy,T
Hy
MTRC
H,HEC,HKT,Hy,MTRC
A,QD,Em,H,HEC,HKT,Hy,MTRC,T,W
HEC
HEC,HKT
HEQHKT
HEC,HKT
TYPE
PDS
TS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
ASTM A 666
ASTM A 673
ASTM F 593
ASTM F 594
ASTM F 738M
ASTM F 836M
BA
BS 1052
1995
1987
1980(1986)
BS 1202: Part 1 1974
BS 1247: Part 3 1991
BS131
BS 1429
BS 1449: Part 1 1991
BS 1449: Part 2 1983
BS 1449: Part 4 1983
BS 1449: Section 19911.1
BS 1449: Section 19911.11
BS 1449: Section 19911.12
Annealed or Cold-worked Austenitic Stainless Steel Sheet Strip,Plate, and Flat Bar
Standard specification for sampling procedure for impact testingof structural steel
Stainless Steel Bolts, Hex Cap Screws, and Studs
Stainless Steel Nuts
Stainless Steel Metric Bolts, Screws, and Studs
Stainless Steel Metric Nuts
Code practice for the structural use of steel
Specification for mild steel wire for general engineeringpurposes
Specification for nails - steel nails
Specification for aluminium manhole steps
Notched bar tests
Specification for annealed round steel wire for general engineeringsprings
Specification for carbon and carbon-manganese plate, sheet andstrip
Specification for stainless and heat-resisting steel plate, sheet andstrip
Specification for stainless and heat-resisting steel plate, sheet andstrip
Steel plates, sheet and strip : Carbon and carbon-manganeseplate, sheet and strip : General specification
Specification for cold rolled narrow strip based on specifiedminimum strength
Specification for tolerances on dimensions and shape for hotrolled narrow strip
-167-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS 1449: Section1.13
BS 1449: Section1.14
BS 1449: Section1.15
BS1.2
BS1.5
BS1.8
BS1.9
BS2
BS
BS
BS
BS
BS
1449: Section
1449: Section
1449: Section
1449: Section
1501: Part 1&
1564
1723: Parti
1723: Part 2
1723: Part 3
1723: Part 4
BS 2056
BS 2600
1991
1991
1991
1991
1991
1991
1991
1980(1988)
1975(1983)
1986
1986
1988
1988
1991
BS 2600: Parti 1983
BS 2600: Part 2 1973
BS 2633 1987
Specification for tolerances on dimensions and shape for coldrolled narrow strip
Specification for hot rolled narrow strip supplied in a range ofconditions for heat treatment and general engineering purposes
Specification for cold rolled narrow strip supplied in a range ofconditions for heat treatment and general engineering purposes
Specification for hot rolled steel plate, sheet and wide strip basedon formability
Specification for cold rolled wide material based on specifiedminimum strength
Specification for hot rolled narrow strip based on formability
Specification for cold rolled narrow strip based on formability
Steels for pressure purposes: plates
Specification for pressed steel sectional rectangular tanks
Specification for brazing
Guide to brazing
Brazing: methods for non-destructive and destructive testing
Methods for specifying brazing procedures and operatorapproval testing
Specification for stainless steel wire for mechanical springs
Radiographic examination of fusion welded butt joints in steel
Radiographic examination of fusion welded butt joints in steel -Methods for steel 2 mm up to and including 50 mm thick
Methods for steel over 50 mm up to and including 200 mm thick
Specification for class I arc welding of ferritic steel pipework forcarrying fluids
HEC,HKT
HEC,HKT
H,HEC,HKT
HEQHKT
HECHKT
HEQHKT
HEC,HKT
HEQW
AAHK
A,D5H,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
HKT
A,B,H,HEC,Hy,MTRC
A,B,H,HEC,Hy,MTRQT
A,B,H,HEC,Hy5
MTRC
A,H,HEC,Hy,T
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
TS
PSS
PDS
TS
TS
TS
PDS
-168-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS 2763
BS 2803
BS29
BS2910
1982(1988)
1976(1987)
1986
BS 2989
BS 2994
1982
BS 3019: Part 2
BS302
BS 302: Part 1
BS 302: Part 2
BS 302: Part 3
BS 302: Part 5
BS 302: Part 6
BS 302: Part 7
BS 302: Part 8
BS3100
BS 3111: Part 2
BS 3382
BS 3382: Parts 1and 2
1960
1987
1987
1987
1987
1987
1989
1989
1979
1961
1961
Specification for round carbon steel wire for wire ropes
Specification for pre-hardened and tempered carbon and low alloyround steel wire for springs for general engineering purposes
Specification for carbon steel forgings above 150mm railingsection
Methods for radiographic examination of fusion weldedcircumferential butt joints in steel pipes
Specification for continuously hot-dip zinc coated and iron-zincalloy coated steel: wide strip, sheet/plate and slit wide strip
1976(1987) Specification for cold rolled steel sections
Austentic stainless steel and heat-resisting steel
Stranded steel wire ropes
Stranded Steel Wire Ropes : Specification for GeneralRequirements
Specification for Ropes for General Purpose
Specification for Zinc Coated Ropes for Ships
Specification for Ropes for Hauling Purpose
Specification for Purpose for Mine Hoisting
Specification for Large Diameter Ropes for General Purpose
Specification for Higher Breaking Load Ropes
Specification for steel castings for general engineering purposes
Steel for cold forged fasteners and similar components - StainlessSteel
Specification for electroplated coatings on threaded components
Cadmium on steel components. Zinc on steel components
Hy
MTRC
AAHFCRHEC,MTRC
HEC,Hy,MTRC
A,D,HEC,Hy,T,W
A,D,H,HEC,MTRC,T
H
A,C9Ern,H,HEC,Hy,MTRC,T,W
HEC
HEC
HEC
HEC
HEC
HEC
HEC
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
A,D,HEC,MTRC/r
HEC
H,HEC,HKT,Hy,MTRC
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
-169-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS 3600
BS3601
BS3830&BS1344
BS4
BS 4: Part 1
BS405
BS4102
BS4135
BS 4360
BS 4395
1976(1988) Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes
1987(1993) Steel pipes and tubes for pressure purposes: carbon steel withspecified room temperature properties
Vitreous Enamelled Steel Building Components
BS 3923: Parti 1986
BS 3923: Part 2 1972
Methods for manual examination of fusion welds in ferritic steels
Automatic examination of fusion welded butt joints in ferriticsteels
Structural steel sections
1980(1993) Specification for hot-rolled sections
1987
1990
1984
1986
BS 4395: Part 1 1969
BS 4395: Part 2 1969
BS 449 1969
Specification for uncoated expanded metal carbon steel sheetsfor general purposes
Specification for steel wire and wire products for fences
Specification for arc welding of carbon and carbon manganesesteels
Specification for weldable structural steel
Specification for high strength friction grip bolts and associatednuts and washers for structural engineering
Specification for high strength friction grip bolts and associatednuts and washers for structural engineering - general grade
Higher grade bolts and nuts and general grade washers
Specification for the use of structural steel in building
MTRC
A,H,HEC,MTRC
MTRC
A,B,C,D,Em,H,HEC,Hy,MTRC,T,W
A,B,C,D,Em,H ,HEC,Hy,MTRC,T,W
H,MTRC
A,C,D,H,HEC,HKT,Hy3MTRC9T,W
A,D,HEC,T
A,H,HEC,Hy,MTRC
HEC
A,B,C,D,Em,H,HEC,HKT,Hy,T
AAHK,MTRC
A,B,C,D3Em,H,HEC,Hy,MTRC,T,W
AAHK,B,HEC
HEC
PDS
PDS
PDS
TS
TS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
-170-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS 449: Part 2 1969
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Steel
Steel
Steel
BS 4545
BS 4570
BS 4604
1970
1985
BS 4604: Parti 1970
BS 4604: Part 2 1970
BS 4604: Part 3 1973
BS 4848
BS 4848: Part 2 1991
BS5135
Specification for the use of structural steel in building - metricunits
Method of mechanical testing of steel wire
Specification for fusion welding of steel castings
Specification for the use of high strength friction grip bolts instructural steelwork. Metric series
Specification for the use of high strength friction grip bolts instructural steelwork. General grades
Higher grade (parallel shank)
Higher grade (waisted shank)
Hot-rolled structural steel sections
Specification for hot-finished hollow sections
BS 4848: Part 4 1972(1986) Equal and Unequal angles
BS 4848: Part 5 1980
BS 4870: Parti 1981
BS 4871: Parti 1982
BS 4872: Parti 1982
1984
Bulb flats
Specification for approval testing of welding procedures - Fusionwelding of steel
Specification for approval testing of welders when weldingprocedure approval is not required - Fusion welding of steel
Specification for approval testing of welders when weldingprocedure approval is not required - fusion welding of steel
Specification for arc welding of carbon and carbon manganesesteels
A,AAHK,C,D,Em,H,HEC,Hy,MTRC,T,W
Hy
HEC,Hy,MTRC
A,AAHK,B,HEC,MTRC
A,AAHK,B>QD,Em,H,HEC,Hy,MTRC,T,W
A,AAHK,B,HEC,MTRC
A
C,H,HEC,Hy,MTRC
A,C,D,Ern,H,HEC,
HKT,Hy,MTRC,T,W
A,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W
C,HEC,Hy,MTRC
H,HEC,Hy
PSS
TS
PDS
PSS
PSS
PSS
PSS
PDS
PDS
PDS
PDS
TS
H,HEC,Hy TS
A,AAHK,C,D,Em,H TS,HEC,Hy,MTRC,T,W
A,C,D,Ern,H,HEC, P S S
Hy,MTRC,T,W
- 171 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel BS5216
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
BS 5493
BS5531
BS 5950
BS 5950: Part 1
BS 5950: Part 2
BS 5950: Part 3
BS 5950: Part 3Section 3.1
BS 5950: Part 4
BS 5950: Part 5
BS 5950: Part 7
BS 5950: Part 8
BS 5950: Part 9
BS 5996
BS6105
BS 6323
BS 6323: Parti
BS 6323: Part 2
BS 6323: Part 3
1977
1988
1990
1990
1990
1982(1994)
1987
1992
1990
1993
1981
1982(1990)
1982(1990)
1982(1990)
1982(1990)
Specification for patented cold drawn steel wire for mechanicalsprings
Protective coating of iron and steel structure against corrosion
Code of practice for safety in erecting structural frames
Structural use of steelwork in building
Code of practice for design in simple and continuousconstruction : hot rolled sections
Specification for materials, fabrication and erection: hot rolledsections
Design in composite construction
Code of practice for design of simple and continuous compositebeams
Code of practice for design of composite slabs with profiled steelsheeting
Code of practice for design of cold formed section
Specification for materials and workmanship: cold formedsections
Code of practice for fire resistant design (for composite slabswith profiled steel sheeting only)
Code of practice for stressed skin design
Specification for acceptance levels for internal imperfections insteel plate, strip and wide flats, based on ultrasonic testing
Specification for corrosion-resistant stainless steel fasteners
Specification for seamless and welded steel tubes for automobile,mechanical and general engineering purposes
General requirements
Specific requirements for hotfmished welded steel tubes
Specific requirements for hot finished seamless steel tubes
MTRC PDS
A,C,D,H,Hy,T
A,D,H,HEC,T
A,B,D,H,HEC3Hy,T
A,BAH,HEC,Hy,T
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,D,H,HEC,Hy,T
A5D,H,HEC,Hy,T
A,B,D,H,HEC,T
A,D,H,HEC,T
A,H,HEC
A,B,D,H,HECST
H,HEC
H,HEC,Hy,MTRC
A,C,D,Em,H,HEC,Hy,MTRC,T,W
A,B,C,D,Em,H,HEC,Hy,T,W
A,H,Hy
H
H,HEC,Hy,MTRC
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
TS
PDS
PDS
PSS
PDS
PDS
-172-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS 6323: Part 8 1982(1990)
BS 6362
BS 6363
BS 6405
BS 7079
1990(1995)
1983
1984
BS 7079: Part 0 1990
BS 7079: Part Al 1989(1994)
BS 7079: Part Al 1996Supplement
BS 7079: Part Cl 1989
BS 7079: Part C2 1989
BS 7079: Part C3 1989
BS 7079: Part C4 1989
BS 7079: Part E3 1994(BS EN ISO11124-3: 1997)
BS 7079: Part E4 1994(BS EN ISO11124-4:1997)
Specific requirements for longitudinally welded stainless steeltubes
Specification for stainless steel tubes suitable for screwing inaccordance with BS 21 'Pipe threads for tubes and fittings wherepressure-tight joints are made on the threads'
Specification for welded cold formed steel structural hollowsections
Specification for non-calibrated short link steel chain (grade 30)for general engineering purposes: class 1 and 2
Preparation of steel substrates before application of paints &related products
Preparation of steel substrates before application of paints andrelated products - Introduction
Specification for rust grades and preparation grades of uncoatedsteel substrates and of steel substrates after overall removal ofprevious coatings
Representative photographic examples of the change ofappearance imparted to steel when blast-cleaned with differentabrasives
Specification and definitions for ISO surface profile comparatorsfor the assessment of abrasive blast-cleaned surfaces
Method for the grading of surface profile of abrasive blast-cleaned steel using a comparator
Method for the calibration of surface profile comparators and forthe determination of surface profile using a focusing microscope
Method for the calibration of surface profile comparators and forthe determination of surface profile using a stylus instrument
Metallic blast-cleaning abrasives - High-carbon cast-steel shotand grit
Metallic blast-cleaning abrasives - Low-carbon cast-steel shot AAHK
A,H,HEC,Hy,MTRC
H,HEC,Hy,MTRC
A,H
A,C,D,Em}H,HEC,Hy,T,W
AAHK,H,HEC,Hy
A,AAHK,D,H,HEC,Hy,T
A,AAHK,D,H,HEC,T
A,AAHK,D,H,HEQT
A,D,H,HEC,Hy,T
A,D,H3HEC,Hy
A,DJH,HEC,HyJT
A,D,H,HEC,Hy,T
AAHK
PDS
PDS
PDS
PDS
PSS
PSS
PDS
OS
PDS
TS
TS
TS
PDS
PDS
-173-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS7613
BS 7668
1994
1994
BS970
BS 970: Part 1
BS 970: Part 4
BS 970: Part 5
BS 970: Part 6
BS EN 10025
1987
1972
1973
1993
BS EN 10028
BS EN 10028-4 1995
BS EN 10029 1991
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Steel
Steel
Steel
Steel
Steel
Steel
BS EN 10048
BS EN 10051
BS EN 10109
BS EN 10113
BS EN 10140
BS EN 10143
1997
1992
1996
1993
1997
1993
Specification for hot rolled quenched and tempered weldablestructural steel plates
Specification for weldable structural steels. Hot finishedstructural hollow sections in weather resistant
Specification for wrought steels for mechanical and alliedengineering purposes
General inspection and testing procedures and specificrequirements for carbon, carbon manganese, alloy and stainlesssteels.
Valve steels
Carbon and alloy spring steels for the manufacture of hot formedsprings
SI metric values (for use with BS 970 : Part 4 & 5)
Hot rolled products of non-alloy structural steel. Technicaldelivery conditions
Specification for flat products made of steels for pressurepurposes
Nickel alloy steels with specified low temperature properties
Specification for tolerances on dimensions, shape and mass forhot rolled steel plates 3mm thick and above
Hot rolled narrow steel strip - tolerances on dimensions andshape
Specification for continuously hot-rolled uncoated plate, sheetand strip of non-alloy and alloy steels. Tolerances on dimensionsand shape
Metallic materials. Hardness test
Hot-rolled products in weldable fine grain structural steels
Cold rolled narrow strip - tolerances on dimensions and shape
Continuously hot-dip metal coated steel sheet and strip.Tolerances on dimensions and shape
A3,D,Em,H,HEC,Hy,MTRC,T,W
A,B,D,Em,H,HEC,Hy,MTRC,T,W
A,B,C,D,H,HEC,T,W
A,B,C,D,Em,H,
HEC,HKT,Hy,MTRC,T,W
A,D,H,HEC,T,W
D,H,HEC5T
D,H,HEC,T
H
PDS
PDS
PDS
TS
PDS
PDS
PDS
PDS
A,W PDS
A
A,D,H,HEC,T,W
HEC
HEC
A
A,BAEm,H,HEC,Hy,T
HEC
AAHJHOECT
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
-174-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS SteelMATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS EN 10147 1992
BS EN 10149-2 1996
BS EN 10149-3 1996
BS EN 10155
BS EN 10163
BS EN 10163:Part 2
BS EN 10163:Part 3
BS EN 10209
1993
1991
1991
1996
BS EN 10210-1 1994
BS EN 10210-2
BS EN 10218-1
BS EN 1561
BS EN 1563
BS EN 1564
BS EN 287-1
BS EN 288-3
1997
1994
1997
1997
1997
1992
1982
Specification for continuously hot-dip zinc coated structural AAHK,Hsteel sheet and strip. Technical delivery conditions
Hot-rolled flat products made of high yield strength steels for HECcold forming - Delivery conditions for thermomechanicallyrolled steels
Hot-rolled flat products made of high yield strength steels for HECcold forming - Delivery conditions for normalized or normalizedrolled steels
Structural steels with improved atmospheric corrosionresistance. Technical delivery conditions
Specification for delivery requirements for surface conditions ofhot rolled steel plates, wide flats and sections
Plates and wide flats
Sections
Cold-rolled low carbon steel flat products for vitreousenamelling - Technical delivery conditions
Hot finished structural hollow sections of non-alloy and finegrain structure steels - technical delivery requirements
Tolerances, dimensions and sectional properties
Steel wine and wine products. General. Test methods
Founding. Grey castirons
Founding. Spheroidal graphite cast iron
Founding. Austempered ductile cast irons
Approval testing of welders for fusion welding - steels
Welding procedure tests for the arc welding of steels A,D,H,T
PDS
PDS
PDS
A,D,H,HEC,T,W
H
H
H
HEC
A,B,D,Em,H,HEC,Hy,T,W
A,HEC
A,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,H,Hy,T,W
D,H,T,W
W
A,AAHK,D,Em,H,HEC,Hy,T,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PDS
PDS
PDS
TS
TS
- 1 7 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
MATERIALS & TESTS Steel
BS EN 499
BS EN ISO 8503
BS EN ISO 8503-1
BS EN ISO 8503-2
BS EN ISO 8503-3
BS EN ISO 8503-4
EN 10143
ISO 8501-1
ISO 8503-1
ISO 8504-1
1995
1995
1995
1995
1995
1993
1988
1988
1992
ISO 8504-2 1992
ISO 8504-3 1992
SIS 05 59 00
Welding consumables. Covered electrodes for the manual metalarc welding of non alloy and fine grain steels. Classification
Preparation of steel substrates before application of paints andrelated products. Surface roughness characteristics of blast-cleaned steel substrates
Specification and definitions for ISO surface profile comparatorsfor the assessment of abrasive blast-cleaned surfaces
Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
Method for the calibration of ISO surface profile comparatorsand for the determination of surface profile. Focusingmicroscope procedure
Method for the calibration of ISO surface profile comparatorsand for the determination of surface profile. Stylus instrumentprocedure
Specification for continuously hot-dip metal coated steel sheetand strip
Representative photographic examples of the change ofappearance imparted to steel when blast-cleaned with differentabrasives - Ed. 1
Abrasive blast- cleaned surfaces
Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Generalprinciples
Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Abrasive blast-cleaning
Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Hand- andpower-tool cleaning
Surface preparation standard for painting steel surfaces
A,D,H,HEC,Hy,T
AAHK
AAHK
AAHK
AAHK
OS
PSS
PDS
TS
TS
AAHK TS
H,Hy
HEC
HEC
HEC
HEQMTRC
PDS
SS
PSS
PSS
PSS
HEC PSS
AAHK,C,HEC,Hy, PDSW
-176-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Steel
Tiles
Tiles
Tiles
SSPC
BS 1281
BS4131
BS 5385: Part 2
1974
1973
1991
MATERIALS & TESTS Tiles
MATERIALS & TESTS Tiles
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS Timber/Woodworks BS 144: Part 1
MATERIALS & TESTS Timber/Woodworks BS 373
BS 6431: Part 21 1984(1996)
BS 8000: Part 11.1 1989(1995)
Tiles
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
BS 8000:
BS 1142
BS 1142:
BS1186
BS1186:
BS1186:
BS1186:
BS1210
BS 1282
BS144
Part 11.2
Part 2
Parti
Part 2
Part 3
1990
1989
1971(1989)
1991
1988
1990
1963
1975
1990
1990
Surface preparation standards recommended by paintmanufacturer
Specification for glazed ceramic tiles and the fittings for internalwalls
Specification for terrazzo tiles
Code of practice for external ceramic wall tiling and mosaics(including terra cotta and faience tiles)
Method for determination of moisture expansion using boilingwater. Unglazed tiles
Workmanship on building sites: ceramic tiles, terrazzo tiles andmosaics
Workmanship on building sites: natural stone tiles
Specification for fibre building boards
Medium board and hardboard
Timber for and workmanship in joinery:
Specification for Timber
Specifications for workmanship
Specifications for wood trim and its fixing
Specification for wood screws
Guide to the choice, use and application of wood preservatives
Wood preservation using coal tar creosotes - specification forpreservative
Wood preservation using coal tar creosotes - specification forpreservative
1957(1986) Methods of testing small clear specimens of timber
MATERIALS & TESTS
MATERIALS & TESTS
Timber/Woodworks BS 3962 Methods of tests for finishes for wooden furniture:
Timber/Woodworks BS 3962: Part 1 1980(1992) Assessment of low angle glare
MTRC
C,D,Em,H,HEC,Hy,T
A,D,H,HEC,T
D,H,HEC,T
A,D,H,HEC,Hy,T
A,D,HEC,T
D,HEC,T
A,D,H,HEC,Hy,T
A,D,H,HEC5T
A,D,Hy,T,W
A,D,H,HEC,Hy,T,W
A,D,H,HEC,Hy,T,W
A,D,HEC,Hy,T,W
A,AAHK,D,H,HEC,Hy,T,W
A,D,HEC,Hy,T,W
C,Hy,T
C,HEC,Hy,T
A,C,D,Em,H,HEC,Hy,T,W
A,D,HEC,T,W
A,D5HEC,T,W
PSS
PDS
PDS
PSS
TS
PSS
PSS
PDS
PDS
PDS
PDS
PSS
PDS
PDS
PSS
PDS
PDS
TS
TS
TS
-177-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
BS 3962: Part 2
BS 3962: Part 3
BS 3962: Part 4
BS 3962: Part 5
BS 3962: Part 6
BS 4072
BS4261
BS 4685
1983(1990)
1983(1990)
1980(1992)
1980(1992)
1980(1989)
1987
1971(1983}
MATERIALS & TESTS Timber/Woodworks BS 5268
MATERIALS & TESTS Timber/Woodworks BS 5268: Part 2
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
BS 5268: Part 3 1985
BS 5268: Part 5 1989
BS 5268: Section 19784.1
BS 5268: Section 19894.2
BS 5268: Section 19886.1
BS 5268: Section 19897.1
BS 5268: Section 19897.2
BS 5268: Section 19897.3
Assessment of surface resistance to wet heat
Assessment of surface resistance to dry heat
Assessment of surface resistance to cold liquids
Assessment of surface resistance to cold oils and fats
Assessment of resistance to mechanical damage
Wood preservation by means of copper/chromium/arseniccompositions
Glossary of terms applicable to timber
Method for the determination of the wax content of waxed paperand board
Structural use of timber
Structural use of timber - code of practice for permissible stressdesign, materials and workmanship
Code of practice for trussed rafter roofs
Code of practice for the preservative treatment of structuraltimber
Recommendation for calculating fire resistance of timbermembers
Recommendation for calculating fire resistance of timber studwalls and joisted floor constructions
Code of practice for timber frame walls - dwelling not exceedingthree storeys
Recommendations for the calculation basis for span tables -domestic floor joists
Joists for flat roofs
Ceiling joists
A,D,HEC,T,W
A,D,HEC,T,W
A,D,HEC,T,W
A,D,HEC,T,W
A,D,HEC,T,W
A,C,D,Em,H,HEC,Hy,T,W
MTRC
HEC,Hy,W
A,B,C,D,Em,H,HEQHy.T
A,B,C,DJEm,HJ
HEC,Hy,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC5T
A,D,HEC,T
A,D,HEC,T
A,D,HEC5T
A,D,HEC,T
TS
TS
TS
TS
TS
PSS
OS
TS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PDS
PDS
-178-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS Timber/Woodworks
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
MATERIALS & TESTS
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
Timber/Woodworks
BS 5268: Section7.4
BS 5268: Section7.5
BS 5268: Section7.6
BS 5268: Section7.7
BS544
BS 5442: Part 3
BS 5450
BS 5589
BS 5666
BS 5666: Part 2
BS 5669
BS 5669: Part 1
BS 5669: Part 2
BS 5707
BS 5707: Part 1
MATERIALS & TESTS. Timber/Woodworks BS 5707: Part 2
MATERIALS & TESTS Timber/Woodworks BS 5707: Part 3
MATERIALS & TESTS Timber/Woodworks BS 5756
MATERIALS & TESTS Timber/Woodworks BS 6559
MATERIALS & TESTS Timber/Woodworks BS 6566
1989 Ceiling binders
1990 Domestic rafters
1990 Purlins supporting rafters
1990 Purlins supporting sheeting or decking
1969(1994) Specification for linseed oil putty for use in wooden frames
1979(1990) Adhesives for use with wood
1977(1984) Specification for sizes of hardwoods and method of measurement
1989( 1997) Code of practice for preservation of timber
Methods of analysis of wood preservatives and treated timber
1980 Qualitative analysis
Particle board
1989 Methods of sampling, conditioning and test
1989 Specification for wood chipboard
Solutions of wood preservatives in organic solvent
1979 Specifications for solutions for general purpose applications,including timber that is to be painted
1979( 1993) Specification for pentachlorophenol wood preservative solutionfor use on timber that is not to be painted
1980(1990) Methods of treatment
Specification for tropical hardwoods graded for structural use
1985(1992) Guide. General introductory document on European (or CEN)methods of tests for wood preservatives
1985(1991) Plywood
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,D,HEC,T
A,AAHK,D,HEC,T
A,D,HEC,Hy,T,W
A,D5HEC,Hy,T,W
A,C,D,Em,HEC,Hy,T,W
A,D,HEC,HysT,W
A,D,HEC,Hy,T,W
A,D,H,HEC,T
A,HEC
A,HEC
A,D,HEC,T,W
A,D,HEC,T,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PSS
OS
OS
PDS
TS
PDS
PDS
PDS
A,HEC,T PDS
A9D,HEC,T,W
C,A,D,Em9H,HEC,Hy,T,W
A,D,HEC,T,W
A,D,Em,H,HEC,Hy,MTRC,T
PSS
PDS
TS
PDS
- 1 7 9 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Timber/Woodworks BS EN 942
MATERIALS & TESTS Timber/Woodworks WBTC 32/92
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Water
MATERIALS & TESTS Waterproofing
MATERIALS & TESTS Waterproofing
MATERIALS & TESTS Waterproofing
AOAC Test920.194
APHA 2540C
APHA 2540D
ASTMD1125 1982
ASTMD1293 1978
ASTMD3561 1977
ASTMD4327 1984
ASTMD511
ASTMD512
ASTMD516
BS3148
BS 1521
BS3012
1984
1988
1980
1980
1972
1970
1996 Timber in joinery. General classification of timber quality
1992 The use of tropical hardwood in construction sites
1990 Determination of carbonates and bicarbonate contents
1985 Determination of inorganic impurities
1992 Total suspended solids
Test methods for electrical conductivity and resistivity of water
Test methods for pH of water
Test method for lithium, potassium and sodium ions in brackishwater, sea water and brines by atomic absorptionspectrophotometry
Test method for anions in water by ions chromatography
Test methods for calcium and magnesium in water
Test methods for chloride ion in water
Test methods for sulphate ion in water
Methods of test for water for making concrete (including noteson the suitability of the water)
1972( 1994) Specification for waterproof building papers
1970(1982) Specification for low and intermediate density polythene sheetfor general purposes
BS743 1970 Specification for materials for damp-proof courses
A
A,C,D,H,HEC,Hy,T,W
A,D,Em,H,HEC,Hy,T
A,Em5Ep,H,HEC,Hy,T
A9Em,Ep,H,HEC9
Hy,T
A,Em,Ep9H,HEC,Hy,T,W
A,Em,Ep,H,HEC,Hy,T,W
A,Em,Ep9H9HEC,Hy,T,W
A,Em9Ep,H,HEC9
Hy,T,W
A,Em,Ep,H,HEC,Hy,T,W
A,Em,Ep,H,HEC,Hy,T9W
A,Em,Ep,H,HEC,Hy,T3W
A,B,C,Em,H9HEC,Hy,T,W
A,H,HEC,Hy,T
D9Em,Ep,H,HEC,Hy,W
A,C,D,Em,H9HEC,Hy,MTRC,T9W
PDS
PSS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
PDS
PDS
-180-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MATERIALS & TESTS Waterproofing
MATERIALS & TESTS Waterproofing
MATERIALS & TESTS Waterproofing
MATERIALS & TESTS Woodwork &Metalwork
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS General
MISCELLANEOUS Measurement
MISCELLANEOUS Measurement
BS 8000: Part 4
BS8102
CP102
BS 1494: Part 2
BS 2846
BS 2846: Part 3
BS 2846: Part 4
BS381C
BS 4778: Part 3
BS 6100: Part 1
BS 6739
GSCEW
WB
BS718
BS 7307: Part 1
1989 Workmanship on building sites: code of practice for waterproofing
1990 Code of practice for protection of structures against water fromthe ground
1973 Code of Practice for Protection of Buildings against Water fromthe Ground
1967 Specification for accessories for building purposes: sundryfixings
Guide to statistical interpretation of data
1975( 1985) Guide to statistical interpretation of data - determination of astatistical tolerance interval
1976( 1985) Techniques of estimation and tests relating to means andvariances
1996 Specification for colours for identification, coding and specialpurposes
Quality vocabulary - Availability, reliability and maintainabilityterms
Glossary of building and civil engineering terms: general andmiscellaneous
1986 Code of practice for instrumentation in process control systems:installation, design and practice
1992 General specification for civil engineering works
1997 An English-Chinese glossary of terms commonly used in theHong Kong construction industry
1979(1985) Specification for density hydrometers
1990
MISCELLANEOUS Measurement BS 7307: Part 2 1990
Building tolerances. Measurement of buildings and buildingproducts - methods and instruments
Building tolerances. Measurement of buildings and buildingproducts - position of measurement points
A,B,D,HEC,T
A,B,D,H,HEC,MTRQT
A,Ep,H,HEC
H,HEC,Hy
Hy
HEC,Hy,MTRC
HEC,Hy,MTRC
A,AAHK,Em,EpsH,HKT,HEC,Hy,MTRC
A,Em
D,H,HEC,T
AAHK
C,D,HEC,Hy,T,W
H,HEC,Hy
A,D,HEC,T
A,D,HEC,T
PSS
PSS
PSS
PDS
OS
OS
OS
OS
OS
OS
PSS
OS
OS
PDS
OS
OS
- 1 8 1 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
Measurement
Measurement
Measurement
Measurement
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
DIN 7168
SMMBW
SMMCEW
WB
BS 5750
BS 5750: Part 0
BS 5750: Part 1
BS 5750: Part 2
BS 5750: Part 3
BS 5750: Part 4
BS 5750: Part 8
BS 5760
BS6001
BS 9000: Part 2
BS CECC 00800
BS EN ISO 9000-1
BS EN ISO 9000-2
1979
1992
1993
1987
1987
1987
1987
1987
1987
1996
1988
1997
1997
General tolerances for linear and angular dimensions and HECgeometrical tolerances
The Hong Kong standard method of measurement of buildingworks. Third edition
Standard method of measurement for civil engineering works
Standard phraseology of (bills of quantity) item descriptions
Quality systems
Principal concepts and applications
Specification for design/development, production, installationand servicing
Specification for production and installation
Specification for final inspection and test
Guide to use of BS 5750: Parts 1, 2 & 3
Guide to quality management and quality systems elements forservices
Reliability of systems, equipment and components
Sampling procedures for inspection by attributes
General requirements for a system for electronic components ofassessed quality - Specification for national implementation ofthe CECC system
Harmonised system of quality assessment for electronic AAHKcomponents. Code of practice on the use of the PPM approach inassociation with the CECC system
Quality management and quality assurance standards - H,HECGuidelines for selection and use
Generic guidelines for the application of ISO 9001, ISO 9002 Hand ISO 9003
OS
A,Ep,HEC,T,
A,C,D,Ep,HEC,Hy,T,W
C,D,HEC,Hy,T,W
H
H
H
H
H
H
H
A,Eni
AAHK
AAHK
OS
OS
OS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
-182-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Quality
Standard Drawings
Standard Drawings
Standard Drawings
Standard Drawings
BS EN ISO 9000-3
BS EN ISO 9001
BS EN ISO 9002
BS EN ISO 9003
BS EN ISO 9004-1
BS ISO 9000-2
HKQAA
ISO 10011-1
ISO 10011-2
ISO 10011-3
ISO 10012-1
ISO 10013
ISO 8402
ASD
ASD
ASD
CED
1997
1994
1994
1994
1994
1997
1990
1991
1991
1992
1995
1994
Quality Management and Quality Assurance Standards Part 3:Guidelines for the Application of ISO 9001: 1994 to theDevelopment, Supply, Installation and Maintenance ofComputer Software
Quality systems. Model for quality assurance in design,development, production, installation and servicing
Quality systems. Model for quality assurance in production,installation and servicing
Quality system. Model for quality assurance in final inspectionand test
Quality Management and Quality System Elements Part 1:Guidelines
Quality Management and Quality Assurance Standards Part 2:Generic Guidelines for the Application of ISO 9001, ISO 9002and ISO 9003 (BS ISO)
Quality Scheme for the Production and Supply of Concrete
Guidelines for auditing quality system : Auditing
Guidelines for auditing quality system : Qualification criteria forquality systems auditors
Guidelines for auditing quality system : Management of auditprogrammes
Quality assurance requirements for measuring equipment:Metrological confirmation system for measuring equipment
Guidelines for developing quality manuals
Quality management and quality assurance - vocabulary
Project signboard and hoarding details
Architectural office standard drawings
Standard detail drawings (Architectural and structural)
CED standard drawings
HEC
HEC
HEC
ss
H,HEC
H,HEC
H,HEC
HEC
HEC
AAHK
HEC
HEC
SS
SS
SS
SS
SS
PDS
SS
SS
SS
SS
HEC
HEC
A,Ep,HEC
A,Em,Ep,HEC
A,Em,Ep
A,C,Ep,HEC,Hy,T,W
SS
SS
OS
OS
OS
OS
- 183-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
Standard Drawings
Standard Drawings
Standard Drawings
Standard Drawings
Standards Drawings
Standards Drawings
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
DSD
HD
HyD
WSD
BS4210
CED 1994
UIC Code 860
AS 010 & AS Oil
BR552
BR Civil Eng HandBook 11
BR Civil Eng HandBook 32
BS11 1985
BS47 1991
BS 6100 Section2.4.2
BS64 1992
DIN 17223
Pandrol Spec A-AIssue 01
Pandrol Spec B-HIssue 04
Pandrol Spec C-BIssue 02
Pandrol Spec E-CIssue 02
DSD standard drawings
HD standard drawings
HyD standard drawings
WSD standard drawings vol. I to III
Specification for 35mm microcopying of technical drawings
Hong Kong Government Engineering survey offices 1:200 and1:500 survey and drafting specifications
Technical Specification for the Supply of Rails
Australian Standard Grading rules for Jarrah, Karri and Wandoo
Manufacture and Testing of Alumino Thermic Welds
Continuous Welded Rail Installation
Procedures/ Recommendation for Alumino Thermic Welds
Specification for Railway Rails
Steel fishplates for bullhead and flat bottom Railway Rail
British Standard Glossary of Building and Civil EngineeringTerms - Railway Engineering
Steel fish bolts and nuts for Railway Rails
Technical Requirements for Helical Springs
Pandrol Brand 'e1 Series Rail Clip Specification and Tests
Pandrol Brand High Viscosity Nylon 66 Insulators
Pandrol Brand Cast Shoulders
Pandrol Brand Cast Support Baseplate
A,C,D,Ep,HEC,Hy>T
H
A,C,D,Em,Ep,Hy,T,W
A,Ep,HEC,HysW
Hy
C,D,H,Hy,W
MTRC
MTRC
MTRC
MTRC
OS
OS
OS
OS
OS
OS
PDS
PDS
TS
PSS
MTRC PSS
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
MTRC
PDS
PDS
OS
PDS
PDS
TS
PDS
PDS
PDS
-184-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
RAILWAYS
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
Rails
General
General
General
General
General
General
General
Pandrol Spec G-CIssue 01
Pandrol Spec D-DIssue 02
Pandrol Spec DC-A Issue 03
UIC Code 861-2
UIC Code 861-3
UIC Code 864-1
UIC Code 864-2
UIC Code 864-3
UIC Code 864-4
UIC Code 864-5
UIC Code 864-8
UIC Code 866
UK DOT
UK DOT
ANSI 16.1
ANSIZ87.1
ANSI/ISEA 109
BS 1542
BS 2092
BS 3456
BS 3864
1993
1967
1986
1990
1982
1982
1989
Pandrol Brand Maranyl A151 Bushes Specification and Tests MTRC
Pandrol Brand High Temperature EVA MTRC
Pandrol Brand Special Performance Resilient Rubber Rail Pad MTRC
Standard Profiles for Point Rails adapted to the UIC 54 kg/m and MTRC60 kg/m Rail Profile
Standard 60 kg/m Rail Profiles. Types : UIC 60 and 60E
Technical Specification for the Supply of Sleeper Screws
Technical Specification for the Supply of Steel Track Bolts
Technical Specification for the supply of spring steel washers foruse in Permanent Way
Technical Specification for the Supply of Fishplates or Sections for MTRCFishplates made of Rolled Steel
Technical Specification for the Supply of Rail Seat Pads
Rolled Profiles for Fishplates for 54 kg/m and 60 kg/m Rails
Technical specification for the supply of cast manganese steelcrossings for switch and crossing work
Railway construction and operation requirements
User requirements for X-ray screening equipment
Recording and measuring of work injury experiences
Eye and face protection
Gas detector tubes
Eye & face protection for welding
Eye-protectors for industrial and non-industrial users
Specification for safety of household and similar electricalequipment
Fire fighter helmets HEC
TS
PDS
PDS
PDS
MTRC
MTRC
MTRC
MTRC
PDS
PDS
PDS
PDS
PDS
MTRC
MTRC
MTRC
AAHK
AAHK
HEC
HEC
HEC
HEC
HEC
A,D,Em,H
PDS
PDS
PDS
PSS
PSS
OS
OS
PDS
PSS
PDS
PDS
PDS
- 1 8 5 -
Construction Standards Used in Hong Kong (December 1998)
GROUP
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SUBGROUP
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
General
NUMBER
BS 5304
BS 5378
BS5531
BS 6249
BS EN 292
BS EN 354
BS EN 397
EMSD
EMSD
EN 1496
EN 341
EN 345
EN 355
EN 358
EN 361
HEC
HEC
IEC 1243
IEEE 510
JISK0804
JIST8165
LabourDepartment
LabourDepartment
YEAR
1988
1988
1993
1995
1997
1997
1983
1985
1979
TITLE
Code of practice for safety of machinery
Safety signs and colours
Code of practice for safety in erecting structural frames
Fire fighter protective jacket
Safety of machinery. Basic concepts, general principles fordesign.
Rubber boots
Industrial Safety Helmets
Code of practice for the electricity (wiring) regulations
Guidance notes for the electrical products (safety) regulation
Rescue system
Rescue system
Safety Shoes
Sock absorber for fall protection
Rescue harness
Safety harness
HEC Safety Rules
HEC Corporate H&S Manual
HV tester
Safety in HV & High power testing
Detector tubes
Safety belts for line-men
Code of practice for site safety supervision on building worksand street works
List of hearing protectors
USERORGANISATION
A,AAHK,Em,Ep,MTRC
AAHK
A,D,H,HEC,T
HEC
AAHK
HEC
HEC
A
A
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
HEC
A
HEC
TYPE
PSS
OS
PSS
PDS
OS
PDS
PDS
PSS
PSS
PDS
PDS
PDS
PDS
PDS
PDS
OS
OS
PDS
PSS
PDS
PDS
PSS
OS
-186-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY .
General
General
General
General
General
General
General
General
General
General
General
General
General
General
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
OSHA 1910.134
WB
WB
WSD
CAP 22
CAP 295
CAP 295
CAP 295
1994
1994
1998
1990
1990
1995
1998
1998
1993
1995
1990
List of breathing apparatus
Code of practice for fossil-fuel boilers
Guide to safety regulations on lifting appliances and lifting gear,1994
Code of practice for safe use of mobile cranes and tower cranes
A guide to the Construction Sites (Safety) Regulations
A guide to the Factories and Industrial Undertakings (ConfinedSpaces) Regulations
Guide to the Factories and Industrial Undertakings (SafetyOfficers and Safety Supervisors) Regulations
Code of practice for scaffolding safety
Code of practice - Safety and health at work for industrial diving
Code of practice - Safety and health at work with asbestos
Dust/Mist Respirator
Construction site security
Construction site safety manual
WSD safety manual
Fatal Accidents Ordinance
Dangerous Goods (General) Regulations
Dangerous Goods (Government Explosive Depots) Regulations
Dangerous Goods Ordinance
HEC
HEC
A
A
A,B,C,D,Em,H,HEC,Hy,T,W
A,B,C,DsEm,H,HEC,HyJ,W
A,B,C,D9Em,H,HEC,Hy,T,W
A
A
A
HEC
A,B,C,D,Em,H,HEC,Hy,T,W
A,C,D,Em,HEC,Hy,T,W
A,HEC,W
OS
PSS
OS
PSS
OS
OS
OS
PSS
PSS
PSS
PDS
PSS
PSS
PSS
TR
TR
TR
TR
-187-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
Ordinance/ Regulation
CAP 398
CAP 406
CAP 456
CAP 470
CAP 509
CAP 56
CAP 56
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
CAP 59
Occupational Safety and Heath Council Ordinance
Electrical Products (Safety) Regulation
Consumer Goods Safety Ordinance
Builders' Lifts and Tower Working Platforms (Safety)Ordinance
Occupational Safety and Health Ordinance & its SubsidiaryLegislation
Boilers and Pressure Vessels Ordinance & its SubsidiaryLegislation
Boiler and Pressure Receivers Ordinance
Construction Sites (Safety) Regulations
Factories and Industrial Undertakings (Abrasive Wheels)Regulations
Factories and Industrial Undertakings (Asbestos) SpecialRegulations
Factories and Industrial Undertakings (Cartridge-OperatedFixing Tools) Regulations
Factories and Industrial Undertakings (Confined Spaces)Regulations
Factories and Industrial Undertakings (Dangerous Substances)Regulations
Factories and Industrial Undertakings (Electricity) Regulations
Factories and Industrial Undertakings (Fire Precautions inNoticeable Workplaces) Regulations
Factories and Industrial Undertakings (Lifting appliances andLifting Gear) Regulations
Factories and Industrial Undertakings (Noise at Works)Regulations
Factories and Industrial Undertakings (Protection of Eyes)Regulations
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
-188-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
Ordinance/ Regulation CAP 59
SAFETY
SAFETY
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
Ordinance/ Regulation
Ordinance/Regulations
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
CAP 95
CAP 59
CAP 311
CAP 311
CAP 354 Section35
CAP 59
EPD
EPD
EPD
EPD
1997
1997
1997
1997
Factories and Industrial Undertakings (Spraying of FlammableLiquids) Regulations
Factories and Industrial Undertakings (WoodworkingMachinery) Regulations
Factories and Industrial Undertakings Ordinance
Quarries (Safety) Regulations
Factories and Industrial Undertakings (Safety Officers andSafety Supervisors) Regulations
Factories and Industrial Undertakings (Guarding and Operationof Machinery) Regulations
Factories and Industrial Undertakings (First Aid in NoticeableWorkplaces) Regulations
Fire Services Ordinance
Factories and Industrial Undertakings Regulations
Air pollution Control (Asbestos) (Administration) Regulation
Exempted Classes of Asbestos Work Under Sections 69(3) and75(5) of the Air Pollution Control Ordinance
Code of Practice On Handling, Transport and Disposal ofAsbestos Wastes
Factories and Industrial Undertakings (Asbestos) Regulation
Code of practice on asbestos control - Preparation of asbestos Ainvestigation report, asbestos management plan and asbestosabatement plan
Code of practice on asbestos control - Asbestos work using full Acontainment or mini containment method
Code of practice on asbestos control - Safe Handling of Low risk Aasbestos - containing material
Code of practice on asbestos control - Asbestos work using glove Abag method
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
PSS
TR
PSS
PSS
PSS
PSS
-189-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
SITE CLEARANCE
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Asbestos Removal
Demolition
Demolition
Demolition
Demolition
Demolition
Demolition
Demolition
Demolition
Demolition
Demolition
EPD
EPD
EPD
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
BS6187
CAP 123
LabourDepartment
LabourDepartment
LabourDepartment
LabourDepartment
PN175
PN4
PN6
PN71
1997
1993
1988
1992
1982
1989
1989
Practice note on handling of asbestos containing materials inbuilding
Code of practice on the handling, transportation and disposal ofasbestos wastes
Code of practice on the packaging, labelling and storage ofchemical waste
Code of practice of safety and health at work asbestos
Guide to occupational disease prescribed for compensationpurposes
The protection of workers' health series: asbestos.
1992( 1993) A reference note on the control of asbestos at work
Code of practice for demolition
Building (Demolition Works) Regulations
Code of practice for scaffolding safety
Safety guidelines for demolition of building structures
The protection of workers1 health series: health hazards indemolition work
The protection of workers' health series: health hazards indemolition work
Antiquities and monuments - antiquities and monuments
Hoarding, walkways and contractors sheds - Building (Planning)Regulations Part IX
Demolition works
Demolition works - measures for public safety
A
A,Ep,T,W
A
A
A
A,Ep,T,W
A,Ep,HEC,T,W
A,C,D,H,HEC,Hy,T,W
A,HEC
A
A,Ep,Hy,T,W
HEC
A
A
A
A
PSS
PSS
PSS
PSS
PSS
PSS
PSS
PSS
TR
PSS
PSS
PSS
PSS
OS
PSS
PSS
PSS
-190-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
SITE CLEARANCE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
Demolition
Falsework
General
General
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Retaining Structures
Retaining Walls &Other RetainingStructures
Falsework
General
Loading
Loading
Loading
PN75
EMSD
DIN 8570 : Part 1
DIN 8570 : Part 3
AS 1523
BA
BS3134
BS5512
CAP 123
CP3
CP 3: Chapter V
CP 3: Chapter V:Part 2
BS 1564
BA
BS 5975
BS5531
BS 5400: Part 2
BS 5649: Part 6
BS 6399: Part 1
1997
1981
1983
1991
1972
1975(1983)
1992
1982
1988
1978
1982
1984
Hoarding, covered walkways and gantries (including temporaryaccess for construction traffic) - Building (Planning) RegulationsPart IX
Code of practice on design and construction of tower workingplatforms
General tolerances for welded structures - Linear and angulardimensions
General tolerances for welded structures - Geometrical tolerances
Elastomeric bearings for use in structures
Code of practice on wind effects, Hong Kong
Metric tapered roller bearings
Method of calculating dynamic load ratings and rating life ofrolling bearings
Building (Construction) Regulations, Part III, Loads
Code of basic data for the design of buildings
Loading
Wind loads
Specification for pressed steel sectional rectangular tanks
Code of Practice for Oil Storage Installation
Code of practice for falsework
Code of practice for safety in erecting structural frames
Steel, concrete and composite bridges - specification for loads
Lighting columns - specification for design loads
Loading for buildings - code of practice for dead & imposedloads
PDS
A,D,Em
HEC
HEC
A,HEC,Hy,T
A,B,D,H,HEC,Hy,MTRC,T,W
AAHK
AAHK
AAHK
H
H
AAHK
A,B,Ep,HEC
A,H,HEC,Hy,MTRC,T,W
A,D,H,HEC,T
A,B,Hy,T,W
A,Em,H,HEC,Hy,T
A,D,H5HEC,T
PSS
OS
OS
PDS
PSS
PDS
PSS
TR
PSS
PSS
OS
PDS
PSS
PSS
PSS
OS
PSS
PSS
-191 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
STRUCTURES
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Loading
Loading
Loading
Loading
Tanks
Tanks
Tanks
Water RetainingStructures
Water RetainingStructures
General
General
General
General
General
General
Pipeline
Pipeline
Pipeline
BS 6399: Part 3
BS648
BS 8100: Part 1
CAP 123
API 650: 7thEdition
BS 2594
BS 2654
BS 8007
BS8102
BS3416
BS 3947
BS 5834: Part 2
CAP 102
UK WaterResearch Council
WSD
AWWA C 203
BS 1010
BS 1010: Part 2
1988
1964
1986
1975
1989
1987
1990
1991
1976(1997)
1983
1991
1986
1973
Loading for buildings - code of practice for imposed roof loads A,D,HEC,T PSS
Schedule of weights of building materials A,B,D,H,HEC,T, W OS
Lattice tower & masts- code of practice for loading A,D,H,HEC,T PSS
Building (Construction) Regulations, Part III, Loads TR
Welded steel tanks B,HEC PDS
Specification for carbon steel welded horizontal cylindricalstorage tanks
Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt welded shells for thepetroleum industry
Code of practice for design of concrete structures for retainingaqueous liquids
Code of practice for protection of structures against water fromthe ground
Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water
Specification for liquid chlorine
Surface boxes, guards and underground chambers for gas andwaterworks purposes. Specification for small surface boxes
Waterworks Ordinance
"Water Fittings and Materials Directory"
Water Supplies Department civil engineering design manual Vol HEC,WI & II
B,HEC
B,HEC
A,B,C,D,Em,H,HEC,HysT,W
A,B,D,H,HEC3
MTRC,T
HEC,MTRC
HEC,W
W
AAHK
PDS
PDS
PSS
PSS
PDS
PDS
PDS
TR
OS
Coal tar enamel protective coatings for steel waterpipes C,HEC
Specification for draw-off taps and stop valves for water services AAHK,HEC(screw-down pattern)
Draw-off taps and stopvalves for water services (screw-down A,AAHK,D,H,pattern) HEC,MTRC,T,W
PSS
PDS
PDS
PDS
-192-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
BS
BS
BS
BS
BS
BS
BS
BS
BS
1212: Parti
1212: Part 2
1212: Part 3
1212: Part 4
1387
1415
1415: Parti
1415: Part 2
143 & 1256
1990
1990
1990
1991
1985(1990)
1976
1986
1986
BS 1740
BS 1968
BS21
BS 2456
1971(1990)
1953
1985
1990
BS 2871
BS 2871: Parti
BS 2871: Part 2
BS2971
1971
1972
1991
BS3505 1986
Specification for piston type float operated valves (copper alloy H,Wbody) (excluding floats)
Specification for diaphragm type float operated valves (copper H,Walloy body) (excluding floats)
Specification for diaphragm type float operated valves (plastics H,Wbodied) for cold water services only (excluding floats)
Specification for compact type float operated valves for WC H,Wflushing cisterns (including floats)
Specification for screwed and socketed steel tubes and tubulars HEQWand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads
Mixing Valves W
Non-thermostatic, non-compensating mixing valves W
Specification for thermostatic mixing valves W
Specification for malleable cast iron and cast copper alloy HEC,Wthreaded pipe fittings
Specification for wrought steel pipe fittings (screw BS 21 R- HEQWseries thread)
Specification for floats for ballvalves (copper) HEQW
Specification for pipe threads for tubes and fittings where HEQWpressure-tight joints are made on the threads (metric dimensions) -
Specification for floats (plastics) for ball valves for hot and cold HEQWwater
Specification for copper and copper alloys tubes HEQW
Copper tubes for water, gas and sanitation H,HEC,W
Tubes for general purposes H,HEC,W
Specification for class II arc welding of carbon steel pipework for HECcarrying fluids
Specification for unplasticized polyvinyl chloride (UPVC) HEQMTRQWpressure pipes for cold potable water
- 1 9 3 -
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
BS 3600
BS3601
BS4127
BS 4346
BS 4346: Part 1
BS 4346: Part 2
BS 4346: Part 3
BS 4622
BS 4772
BS 5041: Parti
BS 5041: Part 2
BS 5041: Part 3
BS 5041: Part 4
BS 5041: Part 5
BS5150
BS5153
BS5154
BS5155
BS5163
1997
1987(1993)
1994
1969
1970
1982
1970(1983)
1988
1987
1987
1975(1987)
1975(1987)
1974(1987)
1990
1974(1991)
1991
1984(1991)
1986(1991)
BS534 1990
Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes
Specification for Carbon steel pipes and tubes with specifiedroom temperature properties for pressure purposes
Specification for light gauge stainless steel tubes, primarily forwater applications
Specification for joints and fittings for use with unplasticizedPVC pressure pipes
Injection moulded unplasticized PVC fittings for solventwelding for use with pressure pipes, including potable watersupply
Mechanical joints and fittings, principally of unplasticized PVC
Specification for solvent cement
Specification for grey iron pipes and fittings
Specification for ductile iron pipes and fittings
Specification for landing valves for wet risers
Specification for landing valves for dry risers
Specification for inlet breechings for dry riser inlets
Specification for boxes for landing valves for dry risers
Specification for boxes for foam inlets and dry riser inlets
Specification for cast iron gate valves
Specification for cast iron check valves for general purposes
Specification for copper alloy globe, globe stop and check, checkand gate valves
Specification for butterfly valves
Specification for predominantly key-operated cast iron gatevalves for waterworks purposes
Specification for steel pipes and specials for water and sewage HEC,W
HEC,W
H,HEC,W
W
HEC,W
H,HEC,W
H,HEC,W
H,HEC,W
H,HEC5W
H,HEC,W
H,W
H,W
H,W
H,W
H,W
HEC,W
HEC,W
W
W
HEC,W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
-194-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
BS 5391: Parti
BS5412
BS5413
BS 5556
BS61
BS 6572
BS 6700
BS 6730
BS 7291
BS 7291: Parti
BS 7291: Part 2
BS 7291: Part 3
BS 7291: Part 4
BS8010
BS 8010: Part 1
BS 8010: Part 2
1996
1996
1976
1978(1986)
1969(1991)
1985
1997
1986
1990(1995)
1990
1990(1995)
1990(1995)
1989
w
HEC,W
HEC
W
Specification for Acrylonitrile - butadiene - styrene (ABS)pressure pipe - Pipe for industrial uses
Specification for low-resistance single taps and combination tapassemblies (nominal size 1/2 and 3/4) suitable for operation atPN 10 max. and a minimum flow pressure of 0.01 Mpa (0.1 bar)
Specification for the performance of draw-off taps with metalbodies for water services
Specification for general requirements for dimensions andpressure ratings for pipe of thermoplastic materials (metricseries)
Specification for threads for light gauge copper tubes and fittings HEC,W
Specification for Blue polyethylene pipes up to nominal sizes W63mm for below ground use for potable water
Specification for design, installation, testing and maintenance of HEC,Wservices supplying water for domestic use within buildings andtheir curtilages
Specification for Black polyethylene pipes up to nominal sizes63mm for above ground use for cold potable water
Thermoplastic pipes and associated fittings for hot and coldwater for domestic purposes and heating installations inbuildings
General requirements
Specification for polybutylene (PB) pipes and associated fittings
Specification for crosslinked polyethylene (PE-X) pipes andassociated fittings
Specification for chlorinated polyvinyl chloride (PVC-C) pipesand associated fittings
Code of practice for pipelines
Pipelines on land: general
Design, construction and installation
W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
w
w
www
PDS
PDS
PDS
PDS
PDS
PDS
HEC,W
HEQW
HEC5W
PSS
PSS
PSS
-195-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Pipeline
Water Treatment
Water Treatment
Water Treatment
Water Treatment
BS8010: Section2.1
BS8010: Section2.4
BS 8010: Section2.5
BS 8010: Section2.5
BS 8010: Section2.7
BS864
BS 864: Part 2
BS 864: Part 5
BS EN 1057
BS EN 545
WSD
WSD
WSD
BS 6920
BS 6920: Part 1
BS 6920: Part 2
BS 6920: Part 3
1987 Ductile iron
1988 Prestressed concreted pressure pipelines
1989 Glass reinforced thermosetting plastics
1989 Glass reinforced thermosetting plastics
1989 Precast concrete
Capillary and compression tube fittings of copper and copperalloy
1983 Specification for capillary and compression fittings for coppertubes
1990 Specification for compression fittings for polyethylene pipeswith outside diameters to BS 5556
1996 Copper and copper alloys seamless round copper tubes for waterand gas in sanitary and heating applications
1995 Ductile iron pipes, fittings, accessories and their joints for water
pipelines. Requirements and test methods
1997 Manual of Mainlaying Practice
1997 Asbestos work Manual for Maintenance of Asbestos CementWatermains
1995 Guidelines for Excavation Near Water Mains
Suitability of non-metallic products for use in contact with waterintended for human consumption with regard to their effect onthe quality of the water
1996 Specification
1996 Methods of test
1990( 1996) High temperature tests
HEC,W
HEC,W
W
HEC
HEC,W
HEC,W
H,HEC,W
H,HEC,W
H,HEC,W
H,HEC,W
W
W
HEC
M T R Q W
HEC,W
HEC,W
H E Q W
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
PDS
TS
PSS
PSS
PSS
PDS
PDS
TS
TS
- 196-
Construction Standards Used in Hong Kong (December 1998)
GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
Water Treatment
BS 6920: Section2
BS 6920: Section2.1
BS 6920: Section2.3
BS 6920: Section2.4
BS 6920: Section2.5
BS 6920: Section2.6
BS 6920:Subsection 2.2.1
BS 6920:Subsection 2.2.2
BS 6920:Subsection 2.2.3
W H O
1996
1996
1996
1996
1996
1996
1996
1996
1993
Taste of water
Samples for testing
Appearance of water
Growth of aquatic micro-organisms
The extraction of metals
General method of test
Method of testing tastes imparted to water by hoses
Method of testing tastes imparted to water by hoses forconveying water for food and drink preparation
HEC,W
HEC,W
HEC,W
HEC,W
The extraction of substances that may be of concern to public HEC, Whealth
HEC,W
HEC,W
HEC,W
HEC,W
World health organisation's guidelines for drinking water quality HEQW
TS
TS
TS
TS
TS
TS
TS
TS
TS
PDS
-197-
Appendix I
Construction Standard Committee
Terms of Reference
• Advise the Construction Advisory Board on matters relating to construction standards.
• Classify, list, maintain and publish construction standards used in Hong Kong.
• Compile, maintain and publish a glossary of terms commonly used in the local construction industry.
• Identify different construction standards used for the same activities and advise on the mostappropriate means to promote uniformity and consistency.
• Recommend establishment of working groups to review construction standards used in specificsubject areas.
• Monitor and advise on alignment of particular construction standards used in Hong Kong with theircorresponding international standards.
• Advise on the setting up of a central construction standardisation body in Hong Kong.
-198-
Appendix II
Chairman
Members
Construction Standards Committee
Dr Nicky N K Chan
Mr Tony Toy
Mr D Mclearie
Mr K M Cheung
Mr Y S Chow
Mr F Chan
MrWCKeung
Mr Joseph Shek
Mr Otto Poon
Mr Thomas Ling
Mr Augustine Chow
MrHIKwong
Membership
Hong Kong Institution of Engineers
Architectural Services Department
Association of Consulting Engineers of Hong Kong
Buildings Department
Civil Engineering Department
Electrical and Mechanical Services Department
Housing Department
Hong Kong Construction Association Ltd.
Hong Kong Electrical and Mechanical Contractors' Association
Hong Kong Institute of Architects
Hong Kong Institute of Surveyors
Works Bureau
Secretary Mr Wilson W S Pang Works Bureau
-199-
To: The SecretaryConstruction Standards CommitteeWorks Bureau, 11/F Murray Building,Garden Road, Hong Kong(Attn: Mr Wilson W S PANG)(Fax No. -.2523 5327)
Construction Standards Used in Hong Kong(December 1998)
* I suggest to add the following standards in the list:
* I suggest to amend the details of the standards as marked up on the attached pages.
* delete as appropriate.
Appendix III
GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION
TYPE
Signature :
Name
Tide :
Organisation
Telephone No. :
Fax No. :
Date :
-200-
top related