contemporary material technologies · modern machining, joining, and forming etc. are seeing rapid...

TEQIP-III Sponsored

One-week Online Short Term Course (e-STC)

On

Contemporary Material Technologies September 08-12, 2020

Organized by

Department of Industrial & Production Engineering Dr B R Ambedkar National Institute of Technology Jalandhar - 144011

Punjab, INDIA http://www.nitj.ac.in

Chief Patron Prof (Dr) Lalit Kumar Awasthi

Director, NIT Jalandhar

Patron Dr Rajeev Trehan Head, Deptt of IPE

Course Convener Dr Rakesh Kumar

Course Coordinator Dr Rajeev Verma

Course Coordinator Dr Varun Sharma

Course Organizer Dr SS Bhadauria

OUR DISTINGUISHED SPEAKERS

Dr Vivek Sharma

Soft Matter ODES-Lab,

Chemical Engineering,

University of Illinois Chicago, USA

Prof Apurbba Kumar Sharma

Department of Mechanical &

Industrial Engineering,

IIT Roorkee, UK

Dr Gaurav Manik

Department of Polymer &

Process Engineering,

IIT Roorkee, UK

Prof Vishal S Sharma

School of Mech Ind & Aero Engg,

University of the Witwatersrand,

Johannesburg, South Africa

Dr (Ms) Jyoti Menghani

Department of Mechanical

Engineering,

SVNIT Surat, Gujrat

Prof O P Panday

Senior Professor & Head, School

of Physics & Materials Science,

TIET, Patiala, Punjab

Dr Gaurav Verma

Department of Chemical

Engineering,

Panjab University, Chandigarh

Dr Amar Patnaik

Department of Mechanical

Engineering,

MNIT Jaipur, Rajasthan

Prof Harmesh Kumar Kansal

Department of Mechanical

Engineering, UIET,

Panjab University, Chandigarh

Contact: sharmark@nitj.ac.in; vermar@nitj.ac.in, sharmav@nitj.ac.in

Mobile: +91-8288012020; +91-9464740847; +91-8591113750

Department of Industrial & Production Engineering

Dr B R Ambedkar National Institute of Technology Jalandhar - 144011, Punjab, INDIA

http://www.nitj.ac.in

COURSE OUTLINE

Contact: sharmark@nitj.ac.in; vermar@nitj.ac.in, sharmav@nitj.ac.in

Mobile: +91-8288012020; +91-9464740847; +91-8591113750

Department of Industrial & Production Engineering

Dr B R Ambedkar National Institute of Technology Jalandhar - 144011, Punjab, INDIA

http://www.nitj.ac.in

For Registration: Click the link below or Scan the QR code

https://forms.gle/nMuJJv31a4XSTxP37

Last date to apply: September 2, 2020.

Prior registration is mandatory to attend the STC.

No registration fee however, limited seats are available. Registration

will be on first come - first serve basis.

Webinar meeting link and other instructions shall be shared to all

registered participants via e-mail / WhatsApp.

E-certificate shall be issued to the participants on successful

participation of the course.

REGISTRATION

The competitiveness of manufacturing sector depends upon the advancements in materials technologies. The

current trend of miniaturization, the emergence of advance materials and the growing demand of customized

manufacturing is proving catalytic in bringing a major transformation in the areas of manufacturing and

material processing. In fact, it has acquired a center-stage in the whole gamut of production engineering

research.

Various material processing technologies such as nanotechnology, biotechnology, surface engineering,

modern machining, joining, and forming etc. are seeing rapid changes to synchronize to the advent of newer

materials. Research communities all over the globe are venturing on newer experimentations leading to

further push to these areas. The proposed ‘Short Term Course’ intends to enhance the awareness level of the

young research community of this area through a three stage strategy:

In general, the course would facilitate scaling‐up of postgraduate education and demand‐driven Research

& Development.

Specifically, the course would motivate participants towards pursuing the research in the cognate areas of

nanotechnology, biotechnology, surface engineering, modern machining, joining, and forming etc.

Indirectly, the course also intends to reinforce the teaching of the focused areas of STC among the

participating faculty members.

ABOUT THE COURSE

Course intends to cover different aspects of material engineering such as:

Contemporary material trends

Material Fabrications

Material Processing

Material Testing and Characterization

Futuristic Materials and scope