corinthian cast stone · corinthian cast stone high-impact horseshoe shims allow fast, easy,...

Corinthian Cast Stone

Ordering Catalog

HIGH-IMPACT PLASTIC

HORSESHOE SHIMSCorinthian Cast Stone high-impact horseshoe shims allow fast, easy, low-cost leveling of

precast stones, limestones, masonry applications and storefronts. Eliminate the guesswork,

our shims are color-coded according to thickness. We offer 10 sizes and 3 thicknesses.

FEATURES:

• Maximum service life – high-impact polymer is inert

• Low cost, non-staining, color-coded, perfectly balanced

• Light weight, easy to use, easy to install

• Unaffected by liquids, natural chemical and alkalis

• Will not rust or leach when exposed to moisture

• ASTM rating of 5000 psi compressive strength

• Classified – slow burning, no toxic fumes

• Automatic insulation between dissimilar metals

• Available in 10 stock sizes and 3 thicknesses

• Custom sizes and rectangular stock available

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

2004-007-0012 2004-007-0009 2004-007-0006 2004-007-0003

2004-007-0011 2004-007-0008 2004-007-0005 2004-007-0002

2004-007-0010 2004-007-0007 2004-007-0004 2004-007-0001

BL

UE

R

ED

BL

AC

K

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

Our production facility is equipped to weld, shear, punch and bend any metal from brass, bronze, aluminum, carbon or stainless steel. Shims, fasteners, epoxy as well as sealers, cleaning supplies and custom colored mortar are available.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-01: “L” ANCHOR WITH WELDED PIN

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

DOWEL DIA

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

DOWEL DIA

HOLE DIA

STA-02: “L” ANCHOR WITH WELDED PIN

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please complete form and fax back to 631.920.2343

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-03: “L” ANCHOR WITH PIN

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

DOWEL DIADowel:

____ Loose

____ Welded

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-04: FLATSTOCK WITH WELDED PIN

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

DOWEL DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-05: FLATSTOCK WITH PIN

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

HOLE DIA DOWEL DIA

Dowel:

____ Loose

____ Welded

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-06: SPLIT TAIL

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

HOLE DIA

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-07: SPLIT TAIL

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

HOLE DIA

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-08: SPLIT TAIL

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-09: ANCHOR WITH WELDED TAB

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-10: “J” ANCHOR

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-11: “Z” ANCHOR

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

HOLE DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

STA-12: CLIP ANGLE

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

HOLE DIA

STA-13: FLATSTOCK WITH PIN

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-14: EYE BOLT-THREADED

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

DIAMETER:

__ 1/4” __ 1/2”

__ 5/16” __ 5/8”

__ 3/8” __ 3/4”

__ 1”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-15: DOWEL

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

DIAMETER:

__ 3/16” __ 1/2”__ 1/4” __ 5/8”__ 5/16” __ 3/4”__ 3/8” __ Other: ________ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

DOWEL DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

____ Threaded

____ Smooth

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-16: THREADED HALF MOON

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

DIAMETER:

__ 1/4” __ 1/2”

__ 5/16” __ 5/8”

__ 3/8” __ 3/4”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-17: “U” ANCHOR

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

THICKNESS: WIDTH:

__ 1/8” __ 1”

__ 3/16” __ 1 1/4”

__ 1/4” __ 1 1/2”

__ Other: ______ __ 2”

__ 2 1/2”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com

STA-18: “U” BOLT

DRAWING FOR ILLUSTRATIVE PURPOSES ONLY

DIAMETER:

__ 1/4” __ 1/2”

__ 5/16” __ 5/8”

__ 3/8” __ 3/4”

__ Other: ______

FINISH:

__ Stainless Steel Type 304

__ Stainless Steel Type 316

Customer: _________________________________

Contact: ___________________________________

Phone: _____________________________________

Job Name: __________________________________

Quantity:

Please copy, complete form and fax back to 631.920.2343

DIA

ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)

Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims

IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.

©2012 Corinthian Cast Stone, Inc. All rights reserved.

115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com