corinthian cast stone · corinthian cast stone high-impact horseshoe shims allow fast, easy,...
TRANSCRIPT
Corinthian Cast Stone
Ordering Catalog
HIGH-IMPACT PLASTIC
HORSESHOE SHIMSCorinthian Cast Stone high-impact horseshoe shims allow fast, easy, low-cost leveling of
precast stones, limestones, masonry applications and storefronts. Eliminate the guesswork,
our shims are color-coded according to thickness. We offer 10 sizes and 3 thicknesses.
FEATURES:
• Maximum service life – high-impact polymer is inert
• Low cost, non-staining, color-coded, perfectly balanced
• Light weight, easy to use, easy to install
• Unaffected by liquids, natural chemical and alkalis
• Will not rust or leach when exposed to moisture
• ASTM rating of 5000 psi compressive strength
• Classified – slow burning, no toxic fumes
• Automatic insulation between dissimilar metals
• Available in 10 stock sizes and 3 thicknesses
• Custom sizes and rectangular stock available
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
2004-007-0012 2004-007-0009 2004-007-0006 2004-007-0003
2004-007-0011 2004-007-0008 2004-007-0005 2004-007-0002
2004-007-0010 2004-007-0007 2004-007-0004 2004-007-0001
BL
UE
R
ED
BL
AC
K
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
Our production facility is equipped to weld, shear, punch and bend any metal from brass, bronze, aluminum, carbon or stainless steel. Shims, fasteners, epoxy as well as sealers, cleaning supplies and custom colored mortar are available.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-01: “L” ANCHOR WITH WELDED PIN
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
DOWEL DIA
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
DOWEL DIA
HOLE DIA
STA-02: “L” ANCHOR WITH WELDED PIN
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please complete form and fax back to 631.920.2343
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-03: “L” ANCHOR WITH PIN
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
DOWEL DIADowel:
____ Loose
____ Welded
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-04: FLATSTOCK WITH WELDED PIN
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
DOWEL DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-05: FLATSTOCK WITH PIN
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
HOLE DIA DOWEL DIA
Dowel:
____ Loose
____ Welded
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-06: SPLIT TAIL
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
HOLE DIA
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-07: SPLIT TAIL
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
HOLE DIA
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-08: SPLIT TAIL
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-09: ANCHOR WITH WELDED TAB
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-10: “J” ANCHOR
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-11: “Z” ANCHOR
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
HOLE DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
STA-12: CLIP ANGLE
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
HOLE DIA
STA-13: FLATSTOCK WITH PIN
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-14: EYE BOLT-THREADED
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
DIAMETER:
__ 1/4” __ 1/2”
__ 5/16” __ 5/8”
__ 3/8” __ 3/4”
__ 1”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-15: DOWEL
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
DIAMETER:
__ 3/16” __ 1/2”__ 1/4” __ 5/8”__ 5/16” __ 3/4”__ 3/8” __ Other: ________ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
DOWEL DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
____ Threaded
____ Smooth
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-16: THREADED HALF MOON
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
DIAMETER:
__ 1/4” __ 1/2”
__ 5/16” __ 5/8”
__ 3/8” __ 3/4”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-17: “U” ANCHOR
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
THICKNESS: WIDTH:
__ 1/8” __ 1”
__ 3/16” __ 1 1/4”
__ 1/4” __ 1 1/2”
__ Other: ______ __ 2”
__ 2 1/2”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com
STA-18: “U” BOLT
DRAWING FOR ILLUSTRATIVE PURPOSES ONLY
DIAMETER:
__ 1/4” __ 1/2”
__ 5/16” __ 5/8”
__ 3/8” __ 3/4”
__ Other: ______
FINISH:
__ Stainless Steel Type 304
__ Stainless Steel Type 316
Customer: _________________________________
Contact: ___________________________________
Phone: _____________________________________
Job Name: __________________________________
Quantity:
Please copy, complete form and fax back to 631.920.2343
DIA
ST/ST Plate Min. Fy. = 45,000 p.s.i. (ASTM A666)ST/ST Rounds Min. Fy. = 75,000 p.s.i. (ASTM A580)
Suggested items to go withthis anchor:• Concrete screws• Self tapping metal screws• Expansion bolts• Epoxy adhesive• Plastic shims
IMPORTANT: Since every project is unique, the selection and use of an anchor system or any part there of must be determined by competent architects, engineers and/or other appropriate professionals who are familiar with the specific requirementsof the project where these specific items are being used.
©2012 Corinthian Cast Stone, Inc. All rights reserved.
115 Wyandanch Avenue, Wyandanch, New York 11798Phone: 631.920.2340 • Fax: 631.920.2343www.corinthian-usa.com • www.corinthiancaststone.com