designations en
Post on 03-Jun-2018
219 Views
Preview:
TRANSCRIPT
-
8/13/2019 Designations En
1/4
Generator Designations & Definition of Ratings
Generator Model Designations - Midi, John Deere, Deutz and Volvo
All generator model designations begin with the prefix BC. The following letter(s)are used to indicate the manufacturer of the engine on which the generator is based.
For example: Lister-Petter BCLJohn Deere BCJD
Volvo BCV
The next part of the designation is a number which represents the rating of thegenerator followed by a frequency & phase indicator thus;
50Hz 3-Phase BCXX [max standby rating in kVA]-50
50Hz Single Phase BCXX [maximum rating in kWe]-50SP
60Hz 3-Phase BCXX [max standby rating in kWe]-60
60Hz Single Phase BCXX [maximum rating in kWe]-60SP
The final part of the designation indicates the appropriate level of emissionscertification, if applicable.
For example: 50Hz, compliant with Euro Stage 2 - E2
60Hz, compliant with EPA Tier 3 - T3
-
8/13/2019 Designations En
2/4
Summary
BCJD 70-60SP T3
Standard Prefix Emissions LevelE2, T3 etc, or omitted
Engine Manufacturer Frequency Phase
JD John Deere 50 Hz SP Single Phase
L Lister Petter 60 Hz omitted for 3-PhaseM MitsubishiY YanmarD DeutzV Volvo
For 50Hz 3-Phase Max Standby kVA (0.8pf)
For 50Hz Single Phase Maximum kWe (1.0pf)
For 60Hz 3-Phase Max Standby kWe (0.8pf)
For 60Hz Single Phase Maximum kWe (1.0pf)
For Certain Territories Only
The above designations may be further prefixed with the letters AC to indicate thatthe machine is installed in an Acoustic Canopy
For example: ACBCJD 200-60 T3
-
8/13/2019 Designations En
3/4
Generator Model Designations - All other equipment 650kVA
All generator model designations begin with the prefix BC. The following letter(s)are used to indicate the manufacturer of the engine on which the generator is based.
For example: Cummins BCCMitsubishi BCM
Unlike the lower rated sets covered above, the specification of these sets may varybetween Prime and Maximum Standby duty. Hence, the designation incorporates anindicator P or S accordingly. (Also note there are no single phase models in thispart of the range).
The next part of the designation is therefore a number which represents the rating of
the generator followed by the P or S indicator, followed by a frequency indicatorthus;
50Hz 3-Phase Prime BCXX [prime rating in kVA]P-50
50Hz 3-Phase Standby BCXX [max standby rating in kVA]S-50
60Hz 3-Phase Prime BCXX [prime rating in kWe]P-60
60Hz 3-Phase Standby BCXX [max standby rating in kWe]S-60
The final part of the designation indicates the appropriate level of emissionscertification, if applicable.
For example: 50Hz, compliant with T.A. Luft (2g or 4g) - L
50Hz, compliant with Euro Stage 2 - E2
60Hz, compliant with EPA Tier 2 - T2
-
8/13/2019 Designations En
4/4
Summary
BCC 2000P-60 T2
Standard Prefix Emissions LevelE2, T3 etc, or omitted
Engine Manufacturer P Prime FrequencyS Standby
C Cummins 50 HzP Perkins 60 HzM MitsubishiMT MTU
For 50Hz 3-Phase Prime Prime kVA (0.8pf)
For 50Hz 3-Phase Standby Max Standby kVA (0.8pf)
For 60Hz 3-Phase Prime Prime kWe (0.8pf)
For 60Hz 3-Phase Standby Max Standby kWe (0.8pf)
top related