est series grain temperature and level monitoring system...
Post on 29-Aug-2018
217 Views
Preview:
TRANSCRIPT
Aplus Finetek Sensor, Inc.
ISO-9001:2015 certified
EST Series Grain Temperature and Level Monitoring System
More than just another level measurement company ….
Monitoring and controlling grain temperature in a storage system is a key factor in optimizing grain quality. Grain in storage can suffer from the harmful effects of mold growth, disease and pest infestation, the result of which is degradation of grain quality and value. If these conditions occur, the temperature within the grain at storage at those points will increase. If precise temperature measurement within the grain storage bins is made on a continuous basis, then grain conditioning systems can be efficiently employed to eradicate the source of the problems. The EST grain temperature monitoring system can accomplish this grain temperature measurement and can also measure grain levels within the bins, thereby not only instantly tracking and recording grain conditions but also providing inventory measurement information for a complete grain storage monitoring system.
EST sensing cables utilize 1-wire digital temperature sensors which, combined with the Aplus Finetek HubLink data transmission hardware, simplifies and lowers the cost of installation by using RS485 MODBUS digital communication for transmitting information back to your control room or office where you can be viewing all information from the MMS-TLA materials management software. Grain temperature and level measurements from a virtually unlimited number of bins is thereby readily available to assist you in managing your grain quality and value.
Introduction
1
System Architecture
EST110 Multipoint Grain Storage
Temperature Sensing Cable
EST120 Multipoint Grain StorageTemperature & Level Sensing Cable
MMS-TLA Grain Monitoring
Materials Management Software
IPC Industrial Computer
HubLink Data Transmitters
Wireless System Architecture
Applications
EST Cable Guide
RCU2 Remote Control Unit
Order Information
Content
2
3
5
7
9
11
13
15
17
21
23
25
System Architecture
Monitor Changing Level and Temperature of Grain in Storage
JMW104-MHubLink 1-wire
wireless
JMW101-MHubLink RS485
wireless
JMW10-CX Coordinator
IPC with MMS-TLA
EST110Cables
EST110Cables
EST110Cables EST110
CablesEST120Cables
EST120Cables
Wireless
(refer to page 15 for more information on wireless components)
3
RS485 RS485
JMH104-MHubLink 1-wire
JMH101-MHubLink RS485
(MODBUS)
IPC with
MMS-TLA
EST110Cables
EST110Cables
EST110Cables EST110
CablesEST120Cables
EST120Cables
Hardwired
4
Monitor Changing Level and Temperature of Grain in Storage
5: 28.5BC
4: 28.0BC
3: 27.5BC
2: 35.4BC
1: 27.5BC
The EST110 is a multipoint temperature sensing cable that can measure the temperature of grain at different points along its cable in realtime, allowing you to monitor grain condition to ensure optimal grain quality and value. The EST110 uses 1-wire digital sensors. These sensors are accurate, fast and allow for a simpler and significantly lower installation cost than traditional thermocouple cables.
EST110 cables connect to a 1-wire HubLink data transmitter that typically is located near the bin or silo where the cables are installed. The connection between each EST110 and HubLink is accomplished using only a single cable with just one pair of wires, even though up to 30 temperature sensors may exist within each EST110 cable. The HubLink transmits the temperature measurement data to your monitoring system, the Aplus Finetek MMS-TLA software or the Aplus Finetek RCU2 wall mounted control and display unit using RS485 (MODBUS) serial communications.
Features
5
EST110 Multipoint Grain Storage Temperature Sensing Cable
Reinforced steel cable design effectively provides long life.Multiple point temperature measurement, up to thirty (30) 1-wire digital sensors per cable with custom spacing.Detect “hot spot” temperature rises that can indicate pest infestation, disease or mold growth allowing you to respond quickly to eliminate trouble.Provide realtime grain storage temperature monitoring for long-term grain storage facilities, grain processors and feed mills.
Introduction
6
Measurement range
Resolution
Accuracy
Maximum cable length
Sensor separation distance
Cable materials
Tensile strength load
Sensor quantity per cable
IP Rating
Specifications
14⁰F~185⁰F (-10⁰C~85⁰C)
0.1 CB
±0.5⁰C
>30m (98.4ft)
30 sensors maximum
PE (polyethylene) jacketed cable, 19:7 steel reinforced POM (Polyoxymethylene) center
11,000lbf (5,000kgf )
Customized per cable
IP67
Dimensions
2.70 (68.5)
2.60 (66)
L
øø1.26
( 32)
ø0.55 (ø14)
Inch (mm)
Operating temperature range -40⁰F~185⁰F (-40⁰C~85⁰C)
7
EST120 Multipoint Grain Storage Temperature & Level Sensing Cable
5: 28.5BC
4: 28.0BC
3: 27.5BC
2: 35.4BC
1: 27.5BC
0%
50%
100%
Features
Unique simultaneous monitoring of grain level and temperature.Reinforced steel cable design effectively provides long life.Multiple point temperature measurement, up to thirty (30) 1-wire digital sensors per cable with custom spacing.Detect “hot spot” temperature rises that may indicate pest infestation or mold growth to allow for quick response to eliminate trouble.Provide realtime grain storage temperature for long-term grain storage facilities, grain processors and feed mills.Easy to setup and calibrate level measurement function using any two points.RS485 (MODBUS) digital communications easily integrates into your existing system while simplifying and reducing overall system installation costs.
Introduction
The EST120 combine the multipoint temperature sensing of the EST110 cable with continuous level measurement. A single entry point into the bin or silo can now provide both grain inventory (level) and temperature monitoring. The EST120 uses the same 1-wire digital sensors as the EST110 temperature monitoring cable, which are accurate, fast and allow for a vastly simpler and lower cost installation than traditional thermocouple cables. The EST120 cables also provide grain level measurement using reliable continuous capacitance technology. EST120 units feature a direct RS485 (MODBUS) serial digital communication link to transmit measured data directly to your control room. The EST120 temperature/level sensing cables simplify installation, saving time and reducing installation costs.
8
Specifications Dimensions
L
5.79 (147)
5.80 (147.3)
ø0.55 (ø14)
1/2"G
1-1/4"G (PF)
Power supply
Measurement range
Resolution
9~30VDC
14⁰F~185⁰F (-10⁰C~85⁰C)
0.1⁰C
±0.5⁰C
>98.4ft (30m)
Customized per cable
30 sensors maximum
± 1% F.S.
RS485 (MODBUS)9600~57600 bps baud rate
Accuracy
Maximum cable length
Sensor quantity per cable
Sensor separation distance
Non-linearity (level)
Output interface
Diecast Aluminum (powder coated)
PE (polyethylene) jacketed cable, inner ring copper wire
IP 67
1/2"G threaded
Enclosure
Cable materials
IP Rating
Conduit entrance
Tensile strength load 11,000lbf (5,000kgf )
Level: £ 1 secTemperature: £ 1 sec/node
Sampling speed
Inch (mm)
-40⁰F~185⁰F (-40⁰C~85⁰C)Operating temperature range
Introduction
The MMS-TLA is a grain monitoring materials management software package for PC’s that can replace your current manual record keeping of both grain temperatures and grain level within your storage bins and silos. The MMS-TLA software is designed to interface to the EST110 and EST120 grain monitoring cables through the use of RS485 (MODBUS) digital communications. The MMS can be applied in a wide range of industries such as rice milling, flour production, feed milling, food production and in a range of grain processing facilities. MMS-TLA software monitors grain temperature changes within each silo in realtime to detect abnormal temperatures and prevent grain degradation and spoilage. The software can also be used to improve the management of grain inventory to increase profitability.
9
MMS-TLA Grain Monitoring Materials Management Software
Easy to setup, view data graphically and numericallyExport data reports for analysis and record keepingAlarm notification by emailSetup items include: Bin type, name and number, sensing cable model and number, HubLink general settings, alarm setup for high and low temperature, serial port setup, and alarm notification parametersDisplay items including: Bin identification, grain %, level, weight, min/max temperature measured, current temperature of each sensor in each cable, temperature changes for each cableAlarms: grain high/low level, high/low temperature, communication trouble, displayed and email notificationReports: Historical data can be exported to text and Excel formats
CPU: P4, 1GHz and above
Memory: 512MB+
Operating System: MS 2000 and above
Hard Drive Space: 1GB+
Serial Port: USB or RS232
System RequirementsPC Software (MMS-TLA)
Features
10
From the Home Page the operator can view the graphic depiction of up to four (4) silos and their Information including: Silo Number and Name, Sensing Cable Locations (indicated by a circle; maximum nineteen sensing cables per silo), Material % Full and Weight, High/Low Temperature, Access to Current Temperatures Graphs and Information, etc.
Home Page History Query
Device Parameter Setup Alarm Setup
Account Setup Silo Parameter Setup
Historical measurement information can be viewed, exported and printed for further review and analysis. The History Table can be established by entering the start and ending times for the historical query along with the silo number.
Setting up each sensing cable in a given silo is easy. Press the “Setting” menu button to access the Device Setting area. At this menu each sensing cable can be setup, including the setting of the Cable Type, Silo Number and Name, MODBUS ID, COM Port, High/Low Temperature and Level Alarms and Timeout period, etc. The table at the top of this page display, to the right of the silo graphic, will show the setup parameters for each sensing cable in the silo along with their location number.
Temperature and level measurement alarms can be set for each sensing cable and silo. This setup, refer to Device Parameter Setup, allows for visual Home Page display, as well as remote alarm notification. Remote alarm notification is sent by email. Entering the Alarm Setup section is done by pressing the Alarm menu button in the software. Setup of the remote alarm notification includes entering the email addresses to send alarm notification to, and setting the email server designation and the time interval for sending notifications of any alarms that exist.
Pressing the “Setting” menu button allows the operator to access the Silo Setting area. You can select the Silo Type, Silo Dimensions, Material Density, etc. for each silo.
Multiple users can be allowed to access the MMS-TLA software locally or remotely. Account Setup allows you to control the type of account each user has, which then sets the permissions for each user along with what they can do. There are two categories of users, Administrator and Operator. Administrators have full access and can setup permissions in Account Setup, while Operator accounts are limited in what they can do, being primarily limited to viewing information and historical data.
11
IPC Industrial Computer
Specifications
Model Name YAEC-6613
Chassis
Color Black + Silve
Dimensions (WxDxH)
7.61” x 7.87” x 2.24”(193.4mm x 200mm x 57mm)
System Fan None
Chassis Construction
Aluminum alloy
Motherboard
CPU Intel® D2550, 1.86GHz, Dual-Core Processor
Chipset Intel® NM10
System Memory On-board DDR3 4GB
Storage Hard Drive 1 x 2.5” SATA HDD Bay
I/O interfaces
USB 2.0 6
Ethernet 2 x RJ-45 Realtek 8111E GbE LAN
RS-232 6 COM: 6 x DB-9
RS-422/485 2 x RS422/485 x DB-9
Display 1 x VGA
Resolution VGA: Up to 2048 x 1536 @ 75Hz
Audio 1 x Line-out, 1 x Mic-in
Expansions PCIe Mini 1 x Full Size (supports mSATA)1 x Half Size
Power
Input 9~36VDC
Consumption12V@2.2A
(Intel® ATOM™ D2550 with 4GB DDR3 memory)
Reliability
Mounting VESA 100, DIN-Rail
Operating Temperature
-4⁰F~158⁰F (-20⁰C~70⁰C) with air flow (SSD)5%~95% non-condensing
Operating Shock Half-sine wave shock 5G, 11ms, 3 shocks per axis
Operating Vibration
MIL-STD-810F 514.5C-2 (with SSD)
Weight (Net/Gross)
4.84lb (2.2kg) / 6lb (3kg)
Safety / EMC CE/FCC
OS Supported OSMicrosoft® Windows 10 and 7,
Microsoft® Windows® XP Embedded
Features
CPU: Intel Dual Core D2550, 1.86GHz
COM Ports: 6 x RS232, 2 x RS232/422/485, 6 x USB 2.0
Network Interface: 2 x high-speed LAN
IPC (Industrial PC)
Fanless -20°C~70°C
RS-232PCIe Mini Expansion
12
Front View Rear View
Dimension
VGA 4 x USB 2.0
Power 2 x LAN 2 x RS-232/422/485
2 x RS-232 Audio
4 x RS-232 8 x RS-232 2 x USB 2.0
9-36V DC-in
CMOS CLRReset
AT/ATX mode
7.61 (193.4) 2.24 (57)
7.87
(20
0)
4-M4
4-M3
5.99 (152.2)
3.94 (100)
3.94
(10
0)
2.95
(75
)
Inch (mm)
The HubLink 1-Wire is a data transmitter for use with EST110 grain temperature monitoring cables, which use 1-wire digital
temperature sensors. Up to four (4) EST110 cables can be connected to a single HubLink 1-Wire data transmitter. Each cable
connects to the HubLink using only a single pair of wires, vastly simplifying and reducing the cost of overall installation. This is a
key feature of the EST grain temperature monitoring system. The HubLink 1-Wire data transmitter converts all 1-wire
temperature sensing data to an RS485 MODBUS serial link for all EST cables connected to the HubLink, further reducing
overall installation cost, improving overall system reliability and simplifying connection to the remotely located graphical
interface software, the MMS-TLA.
13
HubLink Data Transmitters
Introduction
HubLink 1-Wire Unit = Inch (mm)
Hardwired JMH104-M
Wireless JMW104-M
5.6 (142)
2.17 (55) 7.95 (202)
Specifications
10~30VDC
Four (4) max.; EST110 1-wire grain temperature sensing cable
-40⁰F~176⁰F (-40⁰C~80⁰C)
9600~115200
Ambient temperature
Sensor input
Enclosure
Digital communication link
RS485 baud rate
Power supply
Diecast aluminum (powder coated); IP67 rating
RS485 (MODBUS)
14
Introduction
HubLink RS485 MODBUS Unit = Inch (mm)
Hardwired JMH101-M
Wireless JMW101-M
Power supply
Ambient temperature
Sensor input
Power supply output
Output
RS485 baud rate
Specifications
10~30Vdc
-40⁰F~176⁰F (-40⁰C~80⁰C)
Four (4) max. sets of RS485 MODBUS devices (EST120 1-wire grain temperature/level sensor cable & HubLink 1-Wire data transmitters)
RS485 MODBUS
10~30VDC; 400mA per channel w/ 2A input supply
9600~115200
Electrostatic protection
Enclosure Diecast aluminum (powder coated); IP67 rating
IEC61000-4-2 ESD 8kV air / 4kV contact
The HubLink RS485 MODBUS is a data transmitter for use with EST120 grain temperature/level monitoring
cables and HubLink 1-Wire transmitters. Up to four (4) EST120 cables and HubLink 1-Wire data transmitters
can be connected to a single HubLink RS485 MODBUS data transmitter. This assists with simplifying and
reducing the cost of overall system installation. The HubLink RS485 MODBUS data transmitter also provides
the required 24VDC power supply for the EST120 level/temperature cables.
5.6 (142)
2.17 (55) 7.95 (202)
HubLink wireless data transmitters help reduce cost of cable and overcome obstacles to hardwiring.
JMW104-MHubLink 1-wire
wireless
JMW101-MHubLink RS485
wireless
IPC with MMS-TLA
Specifications
Number of channels
Channel spacing
Date transmission rate
Transmission range
Sensitivity
16
5 MHz
250 kbps
-100dBm (PER 1%)* £
1.24 miles (2km) line-of-sight
Operating frequencyRange 2405 MHz ~ 2480 MHz
Wireless Communication
Input communication HubLink RS485: RS485
HubLink 1-wire: 1-wire signal
Outputcommunication
RS485 MODBUS
RS-485 baud rate
Operating temp.
Static electricityprotection
Power Input
Enclosure
9600/19200/38400
57600/115200
-40F~176BF(-40BC~80BC)
IEC61000-4-2 ESD 8kV Air
4kV contact
Diecast aluminum (powder coated); IP67 rating
10~30VDC
(Router)
(Coordinator)
Wireless Components
15
Example Architecture – HubLink 1-Wire & HubLink RS485 Wireless
Antennae 2.4GHz 7dBi Omni Antenna
*Package Error Rate
Router The Router increases the wireless transmission distance of a HubLink 1-
Wire or HubLink RS485 Data Transmitter when the wireless signal strength is
not adequate to reliably reach the Coordinator. The Router receives data
from the HubLink wireless transmitters, enhances and forwards the wireless
signal to the Coordinator.
RS-485 baud rate
Operating temp.
Static electricity protection
Power Input
Dimension
Specifications
9600/19200/38400
57600/115200
-40F~176BF(-40BC~80BC)
IEC61000-4-2 ESD 8kV Air
4kV contact
146 X 66 X 30 mm
10~30VDC
Coordinator Router /
16
5 MHz
250 kbps
-100dBm (PER 1%)* £
3.5mm SMA Female
1.24 miles (2km) line-of-sight
Operating frequencyRange 2405 MHz ~ 2480 MHz
CoordinatorThe Coordinator manages all communications between multiple HubLink 1-
Wire and HubLink RS485 Data Transmitters, Routers and the MMS-TLA
software via an RS485 communication interface from the Coordinator to the
IPC.
Wireless Communication
16
Number of channels
Channel spacing
Date transmission rate
Transmission range
Sensitivity
Antenna specification
Enclosure Diecast aluminum (powder coated); IP67 rating
Outputcommunication
RS485 MODBUS
*Package Error Rate
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22
23 24 25 26 27 28
Applications
1
2
3
4
5
6
7
RS485
RS485
RS485
RS485
RS485
RS485
1-wire*4 1-wire*4 1-wire*4
1-wire*4 1-wire*4 1-wire*4 1-wire*4
RS485
17
Example 1: EST110 Application (shown hardwired)
28 grain silos, each with one one (1) EST110 temperature monitoring cable
Seven (7) HubLink 1-WireData Transmitters IPC with MMS-TLA
1 2 3 4 5 6 7 8
1 2
RS485
RS485 RS485
RS485
18
Example 2: EST120 Application (shown hardwired)
8 grain silos, each with one (1) EST120 temperature/level monitoring cable
Two (2) HubLink RS485 MODBUSData Transmitters IPC with MMS-TLA
RS485
1 2
1 HubLink 1-Wire
HubLink RS485 MODBUSData Transmitters
HubLink 1-WireData Transmitters
RS485
RS485 RS485
RS485
19
Two (2) grain silos, each with three (3) EST110 temperature monitoring cables and one (1) EST120 temperature/level cable
Example 3: EST110 and EST120 Application (shown hardwired)
EST110
EST110
EST110
EST120 EST120
EST110
EST110
EST110
EST110 and EST120 Application
IPC with MMS-TLA
21
Sensing Cable Quantity / Positioning
Silo center
First ring
Second ring Third ring
If the silo diameter is ³ 26ft (8m), please ensure you follow the recommendations for sensing cable
quantity and positioning as shown in the table on page 22 in order to ensure that the complete sensing
cable system will be able to adequately monitor changing grain temperatures within the silo.
22
13 (4) 1 1
20 (6)
26 (8)
33 (10)
39 (12)
46 (14)
53 (16)
59 (18)
66 (20)
72 (22)
79 (24)
85 (26)
92 (28)
1
3
3
4
6
7
8
11
12
13
17
19
1
0
0
1
1
1
1
0
0
0
1
1
7.5 (2.3)
8.2(2.5)
10.8 (3.3)
15.4 (4.7)
18.4 (5.6)
19.7(6.0)
8.2 (2.5)
9.2(2.8)
9.8(3.0)
17.4(5.3)
21.7(6.6)
3
3
3
5
6
7
3
3
3
6
6
120
120
120
72
60
51
120
120
120
60
60
24.6 (7.5)
26.9 (8.2)
29.5 (9)
34.8 (10.6)
34.8 (10.6)
8
9
10
10
12
45
40
36
36
30
98 (30)
118 (36)
22
29
0
0
8.5(2.6)
8.2(2.5)
3
3
120
120
24.6 (7.5)
27.9 (8.5)
7
10
51
36
42.0 (12.8)
47.6 (14.5)
12
16
30
22.5
131 (40) 34 118.4(5.6) 5 72
37.1 (11.3) 10 36
55.8 (17.0) 18 20
Silo
Diameter
Ft (m)
Quantity
Sensing
Cables
Silo
Center Distance from Center
Ft (m)
Interval Angle (⁰)
First Ring Second Ring Third Ring
QuantityDistance
from CenterFt (m)
Interval Angle (⁰)
QuantityDistance
from CenterFt (m)
Interval Angle (⁰)
Quantity
RCU2 Remote Control Unit
The RCU2 is a remote control unit designed for the small and medium EST grain
temperature and level monitoring system where a central PC system is not available or
wanted. The total number of sensing cables that can interface with the RCU2 is four (4), of
the same type either EST110 or EST120, via the RS485 interface within the RCU2. The unit
is easy and convenient to use with its touch screen graphic display.
Features
Easy-to-use, intuitive, touch screen operation
Graphic display shows representation of up to four (4) silos
RS485 MODBUS interface to sensing cables
Connect with either EST110 temperature or EST120 temperature/level
monitoring sensing cables
Can provide power supply (24VDC) to HubLink data transmitter
Introduction
23
Specifications
Power supply
Display
Touch panel
Voltage output
Memory
100~200VAC, 50/60Hz
7 inch (800 x 480) TFT LCD
Resistive Touch
24VDC (1A maximum)
64MB RAM (90 day storage); 128MB memory storage
24
Enclosure
Enclosure rating
Plastic; 11.7” x 11” x 6.2” (296mm x 281mm x 158mm)
IP65
Operating temperature
Standard: 32⁰F~122⁰F (0⁰C~50⁰C); Low Temperature: -40⁰F~122⁰F (-40⁰C~50⁰C)
Maximum sensing cable input Four (4) EST110 or Four (4) EST120 Sensing Cables
I/O interface COM1 – RS232; COM2 – RS485 MODBUS
Order Information
25
:E 1-1/2":F 2":G 2-1/2":H 3"
:I 4":J 5":K 6"
2M: 5kg/cm
2N : 10kg/cm O : 150Lbs P : 300Lbs
00: None88: Hanging Hook (ETB-0030 hanging hook included)99: Adjustable Angle Mount (ETB-0040 adjustable angle mount included)SS: Special
Process Connection
Length (Unit: m)*
Sensor Interval*
Sensor Quantity
05: One sensor every 0.5m
10: One sensor every 1m (std.)
15: One sensor every 1.5m
20: One sensor every 2.0m
95: One sensor every 9.5m (max.)
Size Specification
Flange
01: 1PCS02: 2PCS
30: 30PCS(max.)
-EST110 - 0 3 00 01 3 0 -
01: 1m (minimum)02: 2m03: 3m
35: 35m (maximum)
* Round up to whole number for part number,
example: if actual length required is 25.3m,
use 26 in part numbering for length.
* Example: separation interval of 1.82m should
use code 18 and specify the exact distance in
the description.
26
Size Specification
Flange
Screw
:E 1-1/2":F 2":G 2-1/2":H 3"
:I 4":J 5":K 6"
2M: 5kg/cm
2N : 10kg/cm O : 150Lbs P : 300Lbs
3: 1-1/4"
R : PF(G)U : NPT
Sensor Interval*
05: One sensor every 0.5m
10: One sensor every 1m (std.)
15: One sensor every 1.5m
20: One sensor every 2.0m
95: One sensor every 9.5m (max.)
Process Connection
Length (Unit: m)*
-EST120 -
01: 1m (minimum)02: 2m03: 3m
30: 30m(max.)
M 3 0F 01
Sensor Quantity
3 0 -
01: 1PCS02: 2PCS
30: 30PCS(max.)
88: Hanging Hook (ETB-0031 hanging hook included)99: Adjustable Angle Mount (ETB-0041 adjustable angle mount included)SS: Special
* Round up to whole number for part number,
example: if actual length required is 25.3m,
use 26 in part numbering for length.
* Example: separation interval of 1.82m should
use code 18 and specify the exact distance in
the description.
27
Monitoring System
- Includes MMS-TLA PC software for materials management
- Includes RS485/USB convertor (YTXPUSB485-T)
ETB-0003 IPC (Industrial PC) w/ Windows XP (English);
HubLink
JMH104-M HubLink 1-Wire Data Transmitter (for hardwired system)
JMW104-M HubLink 1-Wire Wireless Data Transmitter
JMH101-M HubLink RS485 MODBUS Data Transmitter (for hardwired system)
JMW101-M HubLink RS485 MODBUS Wireless Data Transmitter
JMW10-CX Wireless Coordinator
JMW10-RX Wireless Router
Communication system0: RS485 MODBUS Hardwired
1: Wireless
RCU-2 0-
RCU2 Remote Control Unit
Operating temperature0: Standard 32⁰F~122⁰F (0⁰C~50⁰C)
1: Low Temperature -40⁰F~122⁰F (-40⁰C~50⁰C)
Sensing cable type0: EST110 Multipoint Grain Storage Temperature
1: EST120 Multipoint Grain Storage Temperature & Level
Order Information
Accessories
28
ETB-0031
ETB-0030
ETB-0041
ETB-0040
Electrical InsulatorEBA-1403
EST120 Hanging hook
EST110 Hanging hook
EST120 Adjustable Angle Mount
EST110 Adjustable Angle Mount
WeightETB-0050Material: Trivalent chromiumWeight: 5kg
Aplus Finetek Sensor, Inc.
Represented by:
08-EST-B0-AP, 07/25/2016
Global Network
Taiwan
China
U.S.
Germany
U.S.
Singapore
Indonesia
Taiwan
TEL: 886-2-2269-6789FAX: 886-2-2268-6682EMAIL: info@fine-tek.com
FineTek Co., Ltd.
China
TEL: 86-21-6490-7260FAX: 86-21-6490-7276EMAIL: info.sh@fine-tek.com
Fine automation Co., Ltd.
Singapore
TEL: 65-6452-6340FAX: 65-6734-1878EMAIL: info.sg@fine-tek.com
IndonesiaFineTek Co., Ltd TEL: 62-(021)-2923-1688FAX: 62-(021)-2923-1988EMAIL: info.id@fine-tek.com
FineTek Pte Ltd.
California, U.S.
TEL: 1-909-598-2488 FAX: 1-909 598-3188EMAIL: info@aplusfine.com
Aplus Finetek Sensor Inc.GermanyFineTek GmbHFrankfurter Str. 62, OG D-65428 Ruesselsheim, GermanyTEL: 49-(0)6142-17608-0FAX: 49-(0)6142-17608-20EMAIL: info@fine-tek.de
Asia North Amerca Europe
Illinois, U.S.
TEL: 1-815-632-3132 FAX: 1-815-716-8464EMAIL: info@aplusfine.com
Aplus Finetek Sensor Inc.
top related