external – poodle clip · external – poodle clip the po-clip features wide “ears”...
Post on 19-Jul-2020
0 Views
Preview:
TRANSCRIPT
HUYETT.COM • 785-392-3017
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
150
Description
For detailed specifications and tolerances, visi t Huyett.com.
How to Identify
EXTERNAL – POODLE CLIP
The PO-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against the retained part. PO-clips are also available in thinner sizes as a standard series of rings known as POL.
PO-015 & POL-015 only
Additional attribute data on adjacent page.
Item#
ShaftDiameter
Groove Size Ring Size & Weight Item#
Clearance Thrust Load1
Square Corner AbutmentOutside
DiameterLarge
SectionAllowable Corner Radii & Chamfers
Max.Load
w/R Max.or Ch Max.
EdgeMargin
RPM LimitsStandard Material
Use with Applicator
Diameter Width Depth Free Diameter
Thickness2 Weight per1,000 Pieces
Installed in Groove
Ring SafetyFactor of
2-1/2
Groove Safety Factor of 2
Ds Dg Tol. F.I.M.** W Tol. d Ref.
Df Tol. T Tol. lbs. L2 Prlbs.
Pglbs.
G Ref.
S R Max.
Ch Max.
P'rlbs.
Y
PO-015 .156" (5/32) .120" ±.004" .002" .039" +.006" .018" .110" ±.003" .035" ±.002" .42 PO-015 .39" 457 110 .320" .042" .050" .040" 250 .036" 80,000 RRA-815
PO-018 .188" (3/16) .148" ±.005" .002" .039" +.006" .020" .140" ±.003" .035" ±.002" .63 PO-018 .42" 609 130 .400" .048" .050" .040" 270 .040" 80,000 RRA-818
PO-025 .250" (1/4) .210" ±.006" .003" .039" +.006" .020" .188" ±.003" .035" ±.002" .84 PO-025 .52" 914 200 .482" .058" .050" .040" 310 .040" 65,000 RRA-825
PO-031 .312" (5/16) .272" ±.006" .003" .046" +.006" .020" .250" ±.003" .042" ±.002" 1.46 PO-031 .63" 1,320 250 .588" .074" .065" .050" 400 .040" 65,000 RRA-831
PO-037 .375" (3/8) .331" ±.006" .003" .046" +.006" .022" .312" ±.004" .042" ±.002" 1.92 PO-037 .72" 1,573 300 .680" .081" .065" .050" 430 .044" 65,000 RRA-837
PO-043 .438" (7/16) .390" ±.008" .003" .056" +.006" .024" .375" ±.004" .050" ±.002" 2.66 PO-043 .79" 2,233 400 .752" .081" .080" .060" 600 .048" 60,000 RRA-843
PO-050 .500" (1/2) .440" ±.008" .004" .056" +.006" .030" .406" ±.004" .050" ±.002" 3.30 PO-050 .89" 2,538 600 .826" .097" .080" .060" 630 .060" 50,000 RRA-850
PO-062 .625" (5/8) .531" ±.008" .004" .056" +.006" .047" .500" ±.005" .050" ±.002" 4.65 PO-062 1.03" 3,045 1,100 .966" .086" .080" .060" 720 .094" 45,000 RRA-862
PO-075 .750" (3/4) .632" ±.010" .004" .068" +.008" .059" .594" ±.005" .062" ±.003" 6.35 PO-075 1.17" 4,669 1,600 1.095" .095" .085" .065" 1,000 .118" 38,000 RRA-875
PO-100 1.000" (1) .860" ±.010" .004" .086" +.008" .070" .812" ±.006" .078" ±.003" 12.65 PO-100 1.51" 7,613 2,600 1.415" .113" .090" .065" 1,800 .140" 25,000 RRA-810
PO-125 1.250" (1-1/4) 1.090" ±.010" .006" .103" +.008" .080" 1.032" ±.006" .093" ±.003" 25.20 PO-125 1.90" 11,165 3,500 1.800" .180" .090" .065" 2,750 .160" 11,000 –
PO-150 1.500" (1-1/2) 1.317" ±.015" .008" .120" +.010" .091" 1.250" ±.008" .109" ±.003" 36.3 PO-150 2.18" 15,530 4,800 2.050" .208" .100" .070" 3,800 .182" 9,000 –
PO-175 1.750" (1-3/4) 1.480" ±.015" .010" .139" +.010" .135" 1.406" ±.010" .125" ±.004" 53.0 PO-175 2.45" 20,808 8,200 2.300" .235" .120" .090" 5,100 .270" 7,000 –
PO-200 2.000" (2) 1.730" ±.015" .012" .139" +.010" .135" 1.625" ±.015" .125" ±.004" 69.2 PO-200 2.83" 23,853 9,450 2.650" .250" .130" .100" 5,100 .270" 5,000 –
W
DsDg
dT
S
DfG
PO
TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:
"NONE" • -BC • -SS • -ZD • -Z3
L2
Dg
.320
.185G2=.160
S
S
1. Verify poodle shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the clip outside diameter (G).4. Measure the clip thickness (T).5. Find the part in the chart.
Alternate Design
Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions
W
DsDg
dT
S
DfG
PO-clip features large shoulder abutments for effective retention of the shaft.
Applications
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
SALES@HUYETT.COM
151For detailed specifications and tolerances, visi t Huyett.com.
Suffix Material/Finish
Larger sizes may be available upon request.
** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft.
1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety factor see pages 14 & 15.
2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of .0002" less than the listed groove width (W) minimum.
Item#
ShaftDiameter
Groove Size Ring Size & Weight Item#
Clearance Thrust Load1
Square Corner AbutmentOutside
DiameterLarge
SectionAllowable Corner Radii & Chamfers
Max.Load
w/R Max.or Ch Max.
EdgeMargin
RPM LimitsStandard Material
Use with Applicator
Diameter Width Depth Free Diameter
Thickness2 Weight per1,000 Pieces
Installed in Groove
Ring SafetyFactor of
2-1/2
Groove Safety Factor of 2
Ds Dg Tol. F.I.M.** W Tol. d Ref.
Df Tol. T Tol. lbs. L2 Prlbs.
Pglbs.
G Ref.
S R Max.
Ch Max.
P'rlbs.
Y
PO-015 .156" (5/32) .120" ±.004" .002" .039" +.006" .018" .110" ±.003" .035" ±.002" .42 PO-015 .39" 457 110 .320" .042" .050" .040" 250 .036" 80,000 RRA-815
PO-018 .188" (3/16) .148" ±.005" .002" .039" +.006" .020" .140" ±.003" .035" ±.002" .63 PO-018 .42" 609 130 .400" .048" .050" .040" 270 .040" 80,000 RRA-818
PO-025 .250" (1/4) .210" ±.006" .003" .039" +.006" .020" .188" ±.003" .035" ±.002" .84 PO-025 .52" 914 200 .482" .058" .050" .040" 310 .040" 65,000 RRA-825
PO-031 .312" (5/16) .272" ±.006" .003" .046" +.006" .020" .250" ±.003" .042" ±.002" 1.46 PO-031 .63" 1,320 250 .588" .074" .065" .050" 400 .040" 65,000 RRA-831
PO-037 .375" (3/8) .331" ±.006" .003" .046" +.006" .022" .312" ±.004" .042" ±.002" 1.92 PO-037 .72" 1,573 300 .680" .081" .065" .050" 430 .044" 65,000 RRA-837
PO-043 .438" (7/16) .390" ±.008" .003" .056" +.006" .024" .375" ±.004" .050" ±.002" 2.66 PO-043 .79" 2,233 400 .752" .081" .080" .060" 600 .048" 60,000 RRA-843
PO-050 .500" (1/2) .440" ±.008" .004" .056" +.006" .030" .406" ±.004" .050" ±.002" 3.30 PO-050 .89" 2,538 600 .826" .097" .080" .060" 630 .060" 50,000 RRA-850
PO-062 .625" (5/8) .531" ±.008" .004" .056" +.006" .047" .500" ±.005" .050" ±.002" 4.65 PO-062 1.03" 3,045 1,100 .966" .086" .080" .060" 720 .094" 45,000 RRA-862
PO-075 .750" (3/4) .632" ±.010" .004" .068" +.008" .059" .594" ±.005" .062" ±.003" 6.35 PO-075 1.17" 4,669 1,600 1.095" .095" .085" .065" 1,000 .118" 38,000 RRA-875
PO-100 1.000" (1) .860" ±.010" .004" .086" +.008" .070" .812" ±.006" .078" ±.003" 12.65 PO-100 1.51" 7,613 2,600 1.415" .113" .090" .065" 1,800 .140" 25,000 RRA-810
PO-125 1.250" (1-1/4) 1.090" ±.010" .006" .103" +.008" .080" 1.032" ±.006" .093" ±.003" 25.20 PO-125 1.90" 11,165 3,500 1.800" .180" .090" .065" 2,750 .160" 11,000 –
PO-150 1.500" (1-1/2) 1.317" ±.015" .008" .120" +.010" .091" 1.250" ±.008" .109" ±.003" 36.3 PO-150 2.18" 15,530 4,800 2.050" .208" .100" .070" 3,800 .182" 9,000 –
PO-175 1.750" (1-3/4) 1.480" ±.015" .010" .139" +.010" .135" 1.406" ±.010" .125" ±.004" 53.0 PO-175 2.45" 20,808 8,200 2.300" .235" .120" .090" 5,100 .270" 7,000 –
PO-200 2.000" (2) 1.730" ±.015" .012" .139" +.010" .135" 1.625" ±.015" .125" ±.004" 69.2 PO-200 2.83" 23,853 9,450 2.650" .250" .130" .100" 5,100 .270" 5,000 –
EXTERNAL – POODLE CLIP
Hardness Ranges: PO-ClipsMaterial Size Range Scale Rockwell Hardness
(blank)Carbon Steel,(SAE 1060-1090)
All C 47 – 53
-SSStainless Steel,(PH 15-7 Mo)
All C 44 – 51
-BC Beryllium Copper15 – 2531+
30NC
54 – 6234 – 43
Edge Margin (Y)Maximum Bottom Radii (Br), .005 for ring sizes PO-015 – PO-050; .010 for ring sizes PO-062 – PO-100 .015 for ring sizes PO-125 – PO-150;.020 for ring sizes PO-175 – PO-200
Optional Center Prong Design
Optional Center Prong Design PO-125 – PO-200
Additional attribute data on adjacent page.
PO### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.
Note: This group contains alternate thickness values (column “T”). Other parameters such as width of groove (“W”) and thrust load “Pr” also differ from standard versions. Please take this into consideration when selecting a PO clip for your design.
.320
.185G2=.160
S
S
.320
.185G2=.160
S
S
(Manufacturer’s Option)
Alternate Designs
Maximum Corner Radius (R Max) & Chamfer (Ch Max)
for Retained Part
Br
Y
R Max
Ch Max
Br
Y
R Max
Ch Max
Br
Y
R Max
Ch Max
HUYETT.COM • 785-392-3017
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
152
Description
For detailed specifications and tolerances, visi t Huyett.com.
How to Identify
EXTERNAL – POODLE CLIP
Additional attribute data on adjacent page.
Item#
ShaftDiameter
Groove Size Ring Size & Weight Item#
Clearance Thrust Load1
Square Corner AbutmentOutside
DiameterLarge
SectionAllowable Corner Radii & Chamfers
Max.Load
w/R Max.or Ch Max.
EdgeMargin
RPM LimitsStandard Material
Use with Applicator
Diameter Width Depth Free Diameter
Thickness2 Weight per1,000 Pieces
Installed in Groove
Ring SafetyFactor of
2-1/2
Groove Safety Factor of 2
Ds Dg Tol. F.I.M.** W Tol. d Ref.
Df Tol. T Tol. lbs. L2 Prlbs.
Pglbs.
G Ref.
S R Max.
Ch Max.
P'rlbs.
Y
POL-015 .156" (5/32) .120" ±.004" .002" .029" +.006" .018" .110" ±.003" .025" ±.002" .30 POL-015 .39" 325 110 .320” .042" .050" .040" 130 .036" 80,000 RRA-915
POL-018 .188" (3/16) .148" ±.005" .002" .029" +.006" .020" .140" ±.003" .025" ±.002" .45 POL-018 .42" 436 130 .400" .048" .050" .040" 140 .040" 80,000 RRA-918
POL-025 .250" (1/4) .210" ±.006" .003" .029" +.006" .020" .188" ±.003" .025" ±.002" .60 POL-025 .52" 650 200 .482" .058" .050" .040" 150 .040" 65,000 RRA-925
POL-031 .312" (5/16) .272" ±.006" .003" .029" +.006" .020" .250" ±.003" .025" ±.002" .87 POL-031 .63" 792 250 .588" .074" .050" .040" 150 .040" 65,000 RRA-931
POL-037 .375" (3/8) .331" ±.006" .003" .039" +.006" .022" .312" ±.004" .035" ±.002" 1.60 POL-037 .72" 1,320 300 .680" .081" .065" .050" 200 .044" 65,000 RRA-937
POL-043 .438" (7/16) .390" ±.008" .003" .039" +.006" .024" .375" ±.004" .035" ±.002" 1.86 POL-043 .79" 1,878 400 .752" .081" .065" .050" 300 .048" 60,000 RRA-943
POL-050 .500" (1/2) .440" ±.008" .004" .046" +.006" .030" .406" ±.004" .042" ±.002" 2.77 POL-050 .89" 2,132 600 .826" .097" .080" .060" 450 .060" 50,000 RRA-950
POL-062 .625" (5/8) .531" ±.008" .004" .046" +.006" .047" .500" ±.005" .042" ±.002" 3.65 POL-062 1.03" 2,538 1,100 .966" .086" .080" .060" 500 .094" 45,000 RRA-962
POL-075 .750" (3/4) .632" ±.010" .004" .056" +.008" .059" .594" ±.005" .050" ±.002" 5.35 POL-075 1.17" 3,756 1,600 1.095" .095" .090" .070" 650 .118" 38,000 RRA-975
POL-100 1.000" (1) .860" ±.010" .004" .056" +.008" .070" .812" ±.006" .050" ±.002" 8.60 POL-100 1.51" 4,872 2,600 1.415" .113" .090" .070" 740 .140" 25,000 RRA-910
POL
TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:
"NONE" • -BC • -SS • -ZD • -Z3
1. Verify poodle shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the clip outside diameter (G).4. Measure the clip thickness (T).5. Find the part in the chart.
PO/POL clips can be assembled with a variety of tools. Anything from pliers to applicators. For more information on applicators, see page 254.
PO/POL clips can be installed easily with a pair of pliers...
and removed with a screwdriver, making PO/POL clips reusable after disassembly.
Installation Removal Tools
Applications
W
DsDg
dT
S
DfG
L2
Dg
Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions
W
DsDg
dT
S
DfG
The POL-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against the retained part. POL-clips are also available in thicker sizes known as the PO series of rings.
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
SALES@HUYETT.COM
153For detailed specifications and tolerances, visi t Huyett.com.
Suffix Material/Finish
Larger sizes may be available upon request.
** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft.
1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety factor see pages 14 & 15.
2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of .0002" less than the listed groove width (W) minimum.
Item#
ShaftDiameter
Groove Size Ring Size & Weight Item#
Clearance Thrust Load1
Square Corner AbutmentOutside
DiameterLarge
SectionAllowable Corner Radii & Chamfers
Max.Load
w/R Max.or Ch Max.
EdgeMargin
RPM LimitsStandard Material
Use with Applicator
Diameter Width Depth Free Diameter
Thickness2 Weight per1,000 Pieces
Installed in Groove
Ring SafetyFactor of
2-1/2
Groove Safety Factor of 2
Ds Dg Tol. F.I.M.** W Tol. d Ref.
Df Tol. T Tol. lbs. L2 Prlbs.
Pglbs.
G Ref.
S R Max.
Ch Max.
P'rlbs.
Y
POL-015 .156" (5/32) .120" ±.004" .002" .029" +.006" .018" .110" ±.003" .025" ±.002" .30 POL-015 .39" 325 110 .320” .042" .050" .040" 130 .036" 80,000 RRA-915
POL-018 .188" (3/16) .148" ±.005" .002" .029" +.006" .020" .140" ±.003" .025" ±.002" .45 POL-018 .42" 436 130 .400" .048" .050" .040" 140 .040" 80,000 RRA-918
POL-025 .250" (1/4) .210" ±.006" .003" .029" +.006" .020" .188" ±.003" .025" ±.002" .60 POL-025 .52" 650 200 .482" .058" .050" .040" 150 .040" 65,000 RRA-925
POL-031 .312" (5/16) .272" ±.006" .003" .029" +.006" .020" .250" ±.003" .025" ±.002" .87 POL-031 .63" 792 250 .588" .074" .050" .040" 150 .040" 65,000 RRA-931
POL-037 .375" (3/8) .331" ±.006" .003" .039" +.006" .022" .312" ±.004" .035" ±.002" 1.60 POL-037 .72" 1,320 300 .680" .081" .065" .050" 200 .044" 65,000 RRA-937
POL-043 .438" (7/16) .390" ±.008" .003" .039" +.006" .024" .375" ±.004" .035" ±.002" 1.86 POL-043 .79" 1,878 400 .752" .081" .065" .050" 300 .048" 60,000 RRA-943
POL-050 .500" (1/2) .440" ±.008" .004" .046" +.006" .030" .406" ±.004" .042" ±.002" 2.77 POL-050 .89" 2,132 600 .826" .097" .080" .060" 450 .060" 50,000 RRA-950
POL-062 .625" (5/8) .531" ±.008" .004" .046" +.006" .047" .500" ±.005" .042" ±.002" 3.65 POL-062 1.03" 2,538 1,100 .966" .086" .080" .060" 500 .094" 45,000 RRA-962
POL-075 .750" (3/4) .632" ±.010" .004" .056" +.008" .059" .594" ±.005" .050" ±.002" 5.35 POL-075 1.17" 3,756 1,600 1.095" .095" .090" .070" 650 .118" 38,000 RRA-975
POL-100 1.000" (1) .860" ±.010" .004" .056" +.008" .070" .812" ±.006" .050" ±.002" 8.60 POL-100 1.51" 4,872 2,600 1.415" .113" .090" .070" 740 .140" 25,000 RRA-910
EXTERNAL – POODLE CLIP
Hardness Ranges: POL-clipsMaterial Size Range Scale Rockwell Hardness
(blank)Carbon Steel,(SAE 1060-1090)
15 – 3137+
30NC
65.5 – 7147 – 53
-SSStainless Steel,(PH 15-7 Mo)
15 – 3137+
30NC
63 – 69.544 – 51
-BC Beryllium Copper15 – 4350+
30NC
54 – 6234 – 43
Additional attribute data on adjacent page.
POL
### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.
Edge Margin (Y)Maximum Bottom Radii (Br), .005 for ring sizes POL-015 – POL-050; .010 for ring sizes POL-062 – POL-100 .015 for ring sizes POL-125 – POL-150;.020 for ring sizes POL-175 – POL-200
Optional Center Prong Design
Optional Center Prong Design POL-125 – POL-200
.320
.185G2=.160
S
S
.320
.185G2=.160
S
S
(Manufacturer’s Option)
Alternate Designs
Maximum Corner Radius (R Max) & Chamfer (Ch Max)
for Retained Part
Br
Y
R Max
Ch Max
Br
Y
R Max
Ch Max
Br
Y
R Max
Ch Max
STACKED OPTIONS AVAILABLE, SEE HUYETT.COM FOR MORE DETAILS
Visit huyett.com to download Material, Compliance, and RoHS/REACH Certifications* in your Account Order History.* Some exclusions apply
top related