frp cable tray 1
Post on 01-Jun-2018
225 Views
Preview:
TRANSCRIPT
-
8/9/2019 Frp Cable Tray 1
1/37
-
8/9/2019 Frp Cable Tray 1
2/37
FRP CABLE TRAY :
EPP FRP Cable Trays are made from FRP sections made of glassFibre and Isopthalic resins by highly sophisticated pultrusionplant and are widely used in various industries for theirnumerous advantages over traditional metallic cable trayssystems
-
8/9/2019 Frp Cable Tray 1
3/37
Pultrusion Process
pultrusion is the process of "pulling" raw compositesthrough a heated die creating a continuous compositeprofile.
-
8/9/2019 Frp Cable Tray 1
4/37
-
8/9/2019 Frp Cable Tray 1
5/37
Cable Tray Raw Material Resin
- Resin used mainly are Unsaturated Poly Ester Resin, IsopthalicResin
- It is available in low or medium viscosity which can be used forfabrication of a wide range of FRP structures by hand lay-up,filament winding and other conventional fabricating techniques.Laminates made by this gives corrosion resistance, excellent
mechanical strength, both static and dynamic, etc.
-
8/9/2019 Frp Cable Tray 1
6/37
Chopped Strand mat
Surface mat use to fabricate first layer of GRP material whichmade from very thin glass fiber strands.
Chopped Strand Mat used in liner are made of chopped glassfiber strands that are bonded together to form mats, either withemulsion or powder binder. They are designed to be compatiblewith resin, and are used to reinforce laminate for moldingapplication.
-
8/9/2019 Frp Cable Tray 1
7/37
Glass roving
It is a continuous type of reinforcement that is used for filamentwinding and other such process where high axial as well as hoopstrength is of prime requirement.
-
8/9/2019 Frp Cable Tray 1
8/37
Design Codes
Designing of various pultruded structure is done as per the actualmeasured strength of profiles.
EN 13706 applies solely to pultruded profiles .This standardspecifies the minimum requirement of quality, tolerances,strength, stiffness and surface of structural profiles. It categoriesin two part like E23 & E17
The EPP CTS are manufactured as per;
1. NEMA FG 1: 1993 Rev. 1 (1994)2. IS 6746: 19943. ONGC 4000 S4. EIL – 50 OEDS – 422 Rev. 4
We have inhouse 24 design engineers working on softwares likeNastran, Auto cad, Unigraphix etc
-
8/9/2019 Frp Cable Tray 1
9/37
-
8/9/2019 Frp Cable Tray 1
10/37
Tests PerformedStandardsApplicable Test Type IS 6746-1994 Specs for Unsaturated Polyester Resin System for Low Pressure Fiber Reinforced Plastics.
IS-6746-Appendix K/UL94 Flame Retardant
ASTM-D-2863 Oxygen Index
ASTM-E84 Flame Spread(Extent of Burning)
ASTM-D638 Tensile Strength at break
Tensile Modulus
ASTM-D695 Compressive Strength at break
Compressive Modulus
ASTM-D732 Shear Strength at break
ASTM-D790 Flexural Strength at break
Flexural Modulus
ASTM-D256 Izod Impact Strength
ASTM-D149 Dielectric Strength short term in Oil
ASTM-D570 Water absorption
ASTM -D 495 ARC Resistance
ASTM D -2883 Barcol Hardness
-
8/9/2019 Frp Cable Tray 1
11/37
-
8/9/2019 Frp Cable Tray 1
12/37
-
8/9/2019 Frp Cable Tray 1
13/37
Manufacturing Facilities
Fully Automatic Pultrusion Machines With Multi dieloading arrangements.
More Than 75 profile sections as per customerrequirements and specifications.
In house Tool Room to Develop new profile die within theshort period.
In House Raw Material and Final Product Testing Facilitiesas per Various Testing Standards.
-
8/9/2019 Frp Cable Tray 1
14/37
EPP Manufactures 2 types of Cable Trays,
a) Ladder Type Cable Tray
b) Perforated Type Cable Tray
with cover and without cover is available .
Perforated Type
Ladder Type
-
8/9/2019 Frp Cable Tray 1
15/37
Features
1. Full Ventilation
2. Long Support Spans
3.Corrosion Resistance
4. Transparent to Radio Frequencytransmission
5. Non Conductive and Non Magnetic
6. Light weight and Manageable
7. High Strength to Weight Ratio
8. Fire Retardants
-
8/9/2019 Frp Cable Tray 1
16/37
-
8/9/2019 Frp Cable Tray 1
17/37
Manufacturing
1. Cable trays are fabricated products frompultruded profile.
2. After manufacturing various pultruded section,fabrication and assembly done as per standarddrawings.
• SS -304 & SS – 316 fasteners are use tofabricate various cable trays.
1. As per the amount of cable load, selection ofprofile takes place like 100 C Channel – 4mm/150 C channel – 6mm etc.
2. Standard length available for cable tray is 3.0meter. And Maximum Support span distancedepends upon weight of Cable.
-
8/9/2019 Frp Cable Tray 1
18/37
-
8/9/2019 Frp Cable Tray 1
19/37
Ladder Type Cable Tray
1. These are manufactured by assembling various cross sections like side runners / ‘C’ channels and rungs.2.The rungs / unistruts are inverted channels of 40 mm width x 20 mm depth and 4 mm thickness.
3.Cable Tray thickness depends height of Cable Tray4.Space between rungs is 300 mm5. The Cable Ladder tray length is the length of the side runner / ‘C’ channels. It is 3000 mm .6.Cable Trays are joined using coupler plates
Coupler Plate
Rungs
C Channel
H- Ht(mm)
T – Thk(mm)
W – Width(
mm)
100 4 30
100 6 30
150 4 40
150 6 40
-
8/9/2019 Frp Cable Tray 1
20/37
Load Capacity
For Ladder Type Cable Tray-
300 mm Rung spacing3000 mm support Span
Width(mm) LoadKg/MtrAllowableDeflection
100 - 150 30 ≤ 10mm
300 60 ≤ 10mm
450-500 75 ≤ 10mm
600 90 ≤ 10mm
750 120 ≤ 10mm
-
8/9/2019 Frp Cable Tray 1
21/37
Fittings
90 Hor Rad Bend 90 Hor Dir Bend Rt & Lt Hand Reducer 90 Inside Ver Rad Bend
Hor Rad Cross 90 Inside Ver Rad Bend Straight Reducer Horizontal Rad Tee
-
8/9/2019 Frp Cable Tray 1
22/37
Perforated Type Cable Tray
The perforated type are C Channel solid bottom, pre-drilled cable tray are designed for light loads namelyinstrumentation and control cables and for transition from cable trays to individuals control points.
Perforations are on standard 300 mm centres and provide both ventilation and sites for cable tie down.
-
8/9/2019 Frp Cable Tray 1
23/37
Fittings
Horizontal Cross
90 Inside Ver Rad Bend90 Hor Bend
90 Outside Ver BendHorizontal Tee
-
8/9/2019 Frp Cable Tray 1
24/37
Accessories
-
8/9/2019 Frp Cable Tray 1
25/37
-
8/9/2019 Frp Cable Tray 1
26/37
Case Study - 2
CLIENT Al Fatah Waterand Power
LOCATION Saudi Araia
PRODUCT FRP Ladder and
perforated TypeCable Tray
(600 , 400 mm)
QTY 21300 M
VALUE 6.28 Cr (3 Orders)
YEAR 2012-13
-
8/9/2019 Frp Cable Tray 1
27/37
Case Study - 3
CLIENT KonstelecEngineer Pvt. Ltd.
LOCATION Manglore Refinery
PRODUCT FRP Ladder andType Cable Tray(300 ,450 ,600 ,
750 mm)
QTY 8650 M
VALUE 83 L
YEAR 2012-13
-
8/9/2019 Frp Cable Tray 1
28/37
-
8/9/2019 Frp Cable Tray 1
29/37
Case Study - 5
CLIENT Adani
LOCATION Mundra - Gujarat
PRODUCT FRP Ladder Type
Cable Tray(600 mm)
QTY 400 M
VALUE 29.3 L
YEAR 2013-14
-
8/9/2019 Frp Cable Tray 1
30/37
-
8/9/2019 Frp Cable Tray 1
31/37
-
8/9/2019 Frp Cable Tray 1
32/37
Testing facilitiesRaw material testing facilities as perrelevant standards .
New standards and facilities are beingincorporated continuously
-
8/9/2019 Frp Cable Tray 1
33/37
Tests PerformedStandardsApplicable Test Type IS 6746-1994 Specs for Unsaturated Polyester Resin System for Low Pressure Fiber Reinforced Plastics.
IS-6746-Appendix K/UL94 Flame Retardant
ASTM-D-2863 Oxygen Index
ASTM-E84 Flame Spread(Extent of Burning)
ASTM-D638 Tensile Strength at break
Tensile Modulus
ASTM-D695 Compressive Strength at break
Compressive Modulus
ASTM-D732 Shear Strength at break
ASTM-D790 Flexural Strength at break
Flexural Modulus ASTM-D256 Izod Impact Strength
ASTM-D149 Dielectric Strength short term in Oil
ASTM-D570 Water absorption
ASTM -D 495 ARC Resistance
ASTM D -2883 Barcol Hardness
-
8/9/2019 Frp Cable Tray 1
34/37
-
8/9/2019 Frp Cable Tray 1
35/37
Geographical reach - Overseas
Saudi Arabia,Doha,Netherlands,Phillipines,Australia,Spain,Africa,USA
MANILA
ChinaUSA
-
8/9/2019 Frp Cable Tray 1
36/37
KIDS ACTIVITYSYSTEM
FUME
SCRUBBER
CUSTOMIZEDPRODUCT
Product Range
-
8/9/2019 Frp Cable Tray 1
37/37
Thank You
EPP Composites Pvt. Ltd.AN ISO 9001:2008 CERTIFIED COMPANY
Plot no 2646, Kranti gate main road, GIDC Lodhika industrial estateKalawad road, Metoda 360021, Dist – Rajkot, Gujarat, INDIA
Ph – +91 2827 287059, 60, 61. Fax – 2827 287063E-mail – info@atikagroup.com, Web – www.atikagroup.com
top related