gas pumping aggregate 6.3 mw highly efficient low emission n О x and co
Post on 30-Dec-2015
26 Views
Preview:
DESCRIPTION
TRANSCRIPT
GAS PUMPING AGGREGATE 6.3 MW
HIGHLY EFFICIENTLOW EMISSION NОx and CO
CНЕMTRADE ESTONIA OÜ
SavingsReliability
GAS PUMPING AGGREGATE 6,3 MWMULTI-FUEL GAS TURBINE ENGINE D – 336
MODERNIZATION OF GAS COMBUSTION UNIT OF ANY VOLUME FOR TURBINES, BOILERS AND INDUSTRIAL FURNACES
HIGHLY EFFICIENTLOW EMISSION NОx and CO
SUPPLY OF EQUIPMENT
DESIGN AND CONSTRUCTION
RECONSTRUCTION AND MODERNIZATION
WARRANTY AND SERVICE
3
4
Gas-pumping aggregate is intended for transportation of natural gas through cross-country gas pipelines and for use in booster pipeline compressor stations. The gas-pumping aggregate is furnished with all necessary equipment ensuring its autonomous operation at all modes as part of compressor station. Main advantages: high economy; reliability and infallibility; high ecological standards; low cost of maintenance Basic specifications: Engine - D-336 with electrically-assisted starting Power turbine shaft power, kW: rated - 6,300 maximum - 7,560 Fuel - natural gas Drive net efficiency, % - 31 Booster unit - 6.3 GTs2-206/38-56S (with dry gas seals) Unit outlet ultimate pressure, MPa - 5.5 Amount of pumped gas, mln. cu. m/day - 12.08 Overall dimensions, m: length - 18.05 width -5.95 height -12.00 Mass, t, max - 70.0
5
6
.Supplied kit includes: gas turbine engine D-336; set of mounting parts; set of spare parts; operational documentation; set of instruments; container for storage and transportation of gas turbine actuator; automatic control system; diagnostics system; installation of flushing gas-air line; service and training of personnel during warranty period; set of endoscopes.
7
GAS TURBINE ENGINE D-336
Quantity of GTE type D-336 in usage - 154 piecesThe total operating time of GTE D-336 - more than 2 500 000 hours
Gas Turbine Engines D-336 are used as a gas compressor drive, gas lifting and crude oil pumping aggregates of capacity 6,3 МW, and also as a power plants generator drives. Engines successfully operate in different climatic zones at an ambient temperature from -60 ° C to +50 ° C at altitudes above sea level up to 2000 m.
8
• Engine Modification: D-336-1, D-336-2, D-336-2Т* • Nominal Power(MCA, H=0), kW 6300 • Frequency of rotor rotation of power turbine, min-1 8200** • Fuel - gaseous *** (natural or oil gas)• Effective Efficiency, % not less then 31• Overall dimensions, mm 3932,5x1068,0x1227,4• Weight, kg 1470
* Maintaining the power up to t = +25 °С.** If necessary, modifications may be made for GTE with rotational frequencies 5000 or 3000 rev/min, and besides D-336-1 –left rotation, D-336-2, D-336-2Т – right rotation.*** Upon customer request, engines can be converted to run on liquid fuel – kerosene of RT, TS-1 or similar fuels of foreign production.
9
GAS TURBINE ENGINE D-336
MAIN FEATURES
High fuel efficiency at constant price increases for natural gas Solution of problems of reducing CO and NOx in combustion
products Minimal investment in new construction, reconstruction and
modernization High reliability and dependability
(total operating time - 2 500 000 hours) Low cost of maintenance
High level of maintainability without dismantling with possibility of a modular repair
High degree of automation Warranty and maintenance service for the entire period of
operation
EFFECTIVENESS OF A NEW GENERATION OF GAS BURNER
Low emission: NOx - no more than 25 ppm СО - no more than 8 ppm
13
Indicator Designation
Unit of measur
e
Tube Burner System
Established Combustion
Chamber
Meaning of
Technical conditions
Presented power at nominal temperature
before turbine
Nе presented
kW 8908 8908 10000
Presented consumption of fuel gas
Vf presented
m3/hour
2943 3313 3600
Specific consumption of fuel gas at relatively
constant power Nе presented = const
q fg m3/kW*h
0,33 0,372 0,360
Efficency of turbine where Ne presented =
const
% 31,56 28,03 29,0
Increase of efficiency % 3.53
Fuel gas savings q fg % 11
14
AK REGENERATOR CC HPT LPT
Diagram of the temperature distribution1- specifications data(passport); 2 – Real data of measurement AK- axial-compressor compressor,CC – chamber of combustion,HPT – high pressure turbine,LPT – Low pressure turbine
15
RESULTS OF MODERNIZATION
Natural gas savings 10-15%
Reduction of pollution: NОx not more than 10÷50 мg/м3 (25
ppm); CO not more than 5÷10 мg/м3 (8
ppm) Increasing project value of turbine
up to 30% Wide range of turbine power regulation with high gas savings
and low NOx and CO from 10 to 120%
Fast recoupment of investment 10-24 months
High level of uniformity of temperature field in gas combustion zone and vibration decrease prolong service life of turbine (primarily a catalyst).
Opportunity to fulfill short term tasks (from 1 to 30 days) reduces losses from downtime.
No necessity in purchasing new turbines and accessory equipment.
Process of gas combustion in turbine
Before modernization New Generation Burner
Thank you for Your attention!CНЕMTRADE ESTONIA OÜ
Madara 31-21, Tallinn, 10613, Estonia Tel: +372 660-10-50, fax: +372 660-10-50
E-mail: nikulin74@gmail.com www.chemtrade.ee
CONSORTIUM FOR CONSTRUCTION AND RECONSTRUCTION OF HYDROELECTRIC POWER STATIONS
105 Swetland Lane 2-nd floor, West Wyoming, PA 18644, USA Tel:+1 570 301-90-67, fax:+1 570 300-18-41
e -mail:: consnikre @ gmail.com
top related