gd&t selft evaluation test - level 4
Post on 10-Mar-2015
1.343 Views
Preview:
DESCRIPTION
TRANSCRIPT
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 1
D
C
A
B
Which of the following is an Orientation control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 2
D
C
A
B
Which Geometric control below is used only for individual features (non related)?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 3
D
C
A
B
Which of the following is a control for Location?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 4
D
C
A
B
Which of the following is not a Form control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 5
D
C
A
B
Which of the following is a Form Control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 6
D
C
A
B
Which of the following is not a Form, Location or Orientation Control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 7
D
C
A
B
Which of the following is a 2 dimensional tolerance?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 8
D
C
A
B
Which of the following never uses a Datum?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 9
D
C
A
B
Which of the following always uses a Datum?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 10
D
C
A
B
Which of the following may be used as a location control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 11
D
C
A
B
Which of the following has the option of using a Datum or not?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 12
D
C
A
B
Which of the following never uses a Datum?
both A and D
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 13
D
C
A
B
Which of the following is a control for Location?
both B and C
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 14
D
C
A
B
Which of the following always requires a Datum?
both B and C
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 15
D
C
A
B
Perpendicularity comes for free with which geometric control ?
both B and C
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 16
D
C
A
B
Which of the following is not a Form control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 17
D
C
A
B
Which of the following is not an Orientation control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 18
D
C
A
B
Which of the following is not a Location control?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 19
D
C
A
B
Which of the following can control taper on a cylindrical part?
both B and C
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 20
D
C
A
B
Concentricity may be specified at ?
All of the above
LMC
MMC
RFS
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 21
D
C
A
B
Flatness may be specified at ?
none of the above
LMC
MMC
RFQ
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 22
D
C
A
B
Which of the following is not a 2 dimensional tolerance?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 23
D
C
A
B
Which of the following is true?
There are no spherical tolerance zones in the standard
True position may have rectangular and cylindrical tolerance zones
Geometric tolerance zones are always circular or cylindrical
Geometric tolerance zones are sometimes triangular in shape (datum targets)
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 24
D
C
A
B
Which of the following can not be specified with a feature of size?
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 4 (of 10)Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL4-T01A-RevA
A
B
If errors are found, or if you have any questions, please send an email to dhebert1000@yahoo.com
D
C
WIP - for
review only
04/10/2023 25
D
C
A
B
Which of the following may have a larger “actual mating size” than “limits of size” allows?
top related