general manual of strip curtain
Post on 13-Oct-2015
31 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
5/24/2018 General Manual of Strip Curtain
1/48
-
5/24/2018 General Manual of Strip Curtain
2/48
Thank you for buying Glux LED Display.
Please read this manual carefully before use LED Display and keep it
well for future reference.
The pictures in the manual is B3720DC except special note.
This manual is protected by copyright and its content owned by Glux.
Glux reserves the right to amend all the technical specification and
other information related. Any organization or individual cant use them
before ofcial permission. This product manual is subject to change
without notice. Anyone who copies, amends, transfers or publishs this
manual should be permitted by Glux.
3 C
CE
ROHS
WEEE
ISO2000
Introduction
Sign Note
Responsibility Declaration
-
5/24/2018 General Manual of Strip Curtain
3/48
Catalog
Chapter 1 Product summarization
1.1 Product introduction ................................................................ 1
1.2 Product parameter .................................................................. 3
1.3 Case ...................................................................................... 6
Chapter 2 Something must be known .......................................... 7
Chapter 3 Introduction of product and spare part ................... 8
Chapter 4 Hardware installation
4.1 Sketch map for strip curtain installation .......... ........... ........... .. 10
4.2 Steps to strip curtain installation ........ ........ ........ ........ ......... ... 11
4.3 Sketch map for strip curtain connection ........... ........... ........... . 12
4.4 Steps to strip curtain connection ........................................... 13
Chapter 5 Software installation
5.1 System request ..................................................................... 14
5.2 Driver installation .................................................................. 15
5.3 Graphic card setup .............................................................. 15
5.4 LED studio installation .......... ........... ........... ........... ........... ..... 18
5.5 LED studio setup .................................................................. 21
-
5/24/2018 General Manual of Strip Curtain
4/48
Chapter 6 Strip Curtain operation .............................................. 24
Chapter 7 Daily maintenance ....................................................... 30
Chapter 8 Addenda
8.1 Way to make Signal cable ..................................................... 31
8.2 Multiscreen setup ................................................................. 33
8.3 Display character on picture or video ........ ........ ........ ......... .... 36
8.4 Play flowing character on picture or video ........ ........ ........ ..... 39
-
5/24/2018 General Manual of Strip Curtain
5/48
Product summarizationPage 1
Glux LED Strip Curtain BAtn Series is the strongest applicability, the
most widely applications products among Glux LED color Curtain, which
have all-weather brightness adjustable range between 500-8000 nit, and
IP65 ingress protection can be tolerated any complex and execrable
environment, which has the ability to withstand strong winds with 60%
transparent rate. The unique structural design of the project makes install
and maintain the products very convenient. The series ranks as flagship
products with excellent picture quality.
Glux LED Strip Curtain BAtn Series will give you unprecedented and
excellent performance through television entertainment, sports stadiums,
outdoor advertising, and many other fields.
Chapter 1 Product summarization
1.1 Product introduction
1.1.1 Feature introduction
1.1.2 Product introduction
The world's first patented technology products
Light, thin, transparent
Appropr ia te to the arbi tra ry area assembl y and ul tra -
high brightness and wind-resistant, suitable for outdoor
LED large screen alternatives
RGB deep gray processing, video sync show
Support Glux multi-window flexible player software and
interactive software
-
5/24/2018 General Manual of Strip Curtain
6/48
Product summarization Page 2
1.1.3 Detail showing
Glux LED Strip Curtain, with unique LED embedded strip structure and the
specic control technology, breaking the concept of traditional design, super-
thin structure, with IP65 ingress protection and unique sun-corvered design
can be tolerated any complex and execrable environment, which has the
ability to withstand strong winds with 60% transparent rate.
Display control circuit and power supply integrated design compact form
makes it easy to assembled installation.
Glux LED Strip Curtain BAtn Series will give you unprecedented and excellent
performance through television entertainment, sports stadiums, outdoor
advertising, and many other elds.
-
5/24/2018 General Manual of Strip Curtain
7/48
Product summarizationPage 3
1.2 Product parameter
1.2.1 B3720DC
-
5/24/2018 General Manual of Strip Curtain
8/48
Product summarization Page 4
1.2.2 B1830DC
-
5/24/2018 General Manual of Strip Curtain
9/48
Product summarizationPage 5
1.2.3 B1830DC
-
5/24/2018 General Manual of Strip Curtain
10/48
Product summarization Page 6
1.2.4 B1860DC
-
5/24/2018 General Manual of Strip Curtain
11/48
Product summarizationPage 7
1.3 Case
Glux LED Strip Curtain is widely used and very practical with light, thin
and t ransparen t fea tu re , b r igh tness ad jus tab le range be tween 500-
8000 nit, and IP65 ingress protection can be tolerated any complex and
execrable environment, which has the ability to withstand strong wind with
60% transparent rate. The unique structural design of the project makes
installation and maintenance very convenient, also it is with excellent picture
quality.
Glux LED Str ip Curtain BAtn Series wi l l g ive you unprecedented and
excellent performance through television entertainment, sports stadiums,
outdoor advertising, and many other fields.
CCTV Spring Festival Gala Evening CCTV Spring Festival Gala Evening
Guangzhou Gymnasium
-
5/24/2018 General Manual of Strip Curtain
12/48
Product summarization Page 8
Chapter 2 Something must be knownSwitch order: Turn on: computer first, then screen.
Turn off: screen first, then computer. (If turn off computer first but not screen, the
screen will be in the high bright spot, and the LED will be damaged, the result
could be serious).
The interval should be over five minutes when switch screen.
Turn on the screen only after the computer accessing control software.
Avoid turning on the screen when it is in uncontrolled state, because at th is time
the impact current of the system is the largest.
A: The computer accessing control software, and other procedures.
B: Computer without electricity.
C: The power supply of the control system is not turned on.
If the switch of the screen often closed itself, timely check the screen or change
the power switch.
Take good care of LED display products gently to avoid damage.
Consider whether the position linked can bear the weight of all products before
installation, avoiding danger.Take care of electricity when install the product. Connect all plugs first, make
sure no short-circuit testing by multimeter, and then connect with AC220V.
Do not disconnect the plugs when power on if some tiles of the screen doesnt
work. Disconnect the switch of the failure tiles first, then replace the failure
tiles with the good. Turn on after all power cables and signal cables connected.
Anyone who do not fo llow this step will take responsibi li ty for wrong operat ion.
The neutral wire and live wire of computer, control system, power cables could
not be reversed. If there are peripherals, test the cabinet to confirm charge after
connection.
Before connect electricity, check the cables, whether there is loose on the
control board when move computers and other control equipment.
If found shirt circuit, tripping, cable burning, smoke and other unusual happened,
do not be repeated testing, and find out the reasons. Lit up LED display after the
problem solved.
Before install strip curtain, the computer should be configured independent
Graphic card, and then set up the Graphic card model as "clone".
-
5/24/2018 General Manual of Strip Curtain
13/48
Product summarizationPage 9
Chapter 3 Introduction of product and spare part
3.1 LED Display: Display pictures, video and other information
3.2 Computer, Graphic card: Mainly control LED display and video
image processing, etc.
3.3 CM-08 controller: control LED display
DVI portComputer
B3720DC B1830DC B1860DC
CM-08 controller
CM-08 controller facade CM-08 controller back
Graphic card
-
5/24/2018 General Manual of Strip Curtain
14/48
Product summarization Page 10
3.5 LED display power cable and signal cable: for the display power
supply and signal transmission.
3.7 Hanging string, locking bolts, L-type socket wrench: rapidly
adjust the locking bolts position on the hanging string.
3.6 Signal converting cable, power converting cable: for connection
between the strip curtain.
3.4 Controller power cables, RS-232 cable, DVI cable: for computer,
controller power supply and data communications.
Power cable RS-232 cable DVI cable
signal cable
Signal convertingcable
power cable
Hanging string locking bolts L-type socket wrench
-
5/24/2018 General Manual of Strip Curtain
15/48
Product summarizationPage 11
Chapter 4 Hardware installation
4.1 Sketch map for strip curtain installation
Back view
Back view
Side view
Power input
Power input
Power input
Power input
Power input
Power supply
cascade
Signal input
Signal input
Signal cascade
-
5/24/2018 General Manual of Strip Curtain
16/48
Product summarization Page 12
4.2 Steps to screen installation
Steps 1: install the hanging string over the screen (refer the figure)
and it should bear all the weight of the screen.
Step 2: when install the first tile, insert the locking bolt to the two ends
of the strip curtain, and lock it with the buckle. (refer the figure)
Step 3: When install the second tile, remove one locking bolt on the
end of the strip curtain first, then install the second tile to the same
locking bolt and lock it (and so on).
Step 4: connect the head and end of the row after all the tiles installed.
(Note: for B3720DC, one power cable for one row tiles with up to 10
Insert
Fasten
-
5/24/2018 General Manual of Strip Curtain
17/48
Product summarizationPage 13
tiles; for B1860 and the 1830 DC maximum of 6 tiles per power cable.
Signal cable should connect the end of the first row to head of the
second row, like Z)
Step 5: first, connect all the power cables of the screen, then connect
the general electrical source; third, connect the general signal cable
to the controller (Note: first turn on the computer until it runs normally,
then turn on the power of LED screen).
Step 6: Send connection file (*. con).
Step 7: After finishing video playing, turn off the screen first, then turn
off the computer until the screen completely off, avoiding LED damage.
4.3 Sketch map for strip curtain connection
U signal port is the one
near indicator light, and
another is D signal port,
reso lu t ion o f U s igna l
port of system defaul t :
1024600,Resolution of D
signal port: 1024168
RS-232 port
DVI portLuminosity
Display Panel
Note: UP and DOWN
a r e f o r l u m i n o s i t y
adjustment, UP is for
inc rease, DOWN is
for decrease. M and C
buttons are for future
upgrade.
DVIcable
DVI
cable
RS-232 cable
WaterproofLANcable
power cable
-
5/24/2018 General Manual of Strip Curtain
18/48
Product summarization Page 14
4.4 Steps to strip curtain connection
Insert DVI Graphic card to the AGP slot on the mainboard, and
install the card driver;
connect the power cables of computer and controller;
Connect Graphic card and controller with DVI cable;
Connect the serial port of controller and computer with RS-232
cable (optional);
Connect sending card and receiving card with LAN cable (the
number of cables in accordance with the packing list);
Make sure the connections well, then begin setup or debugging of
the screen.
-
5/24/2018 General Manual of Strip Curtain
19/48
Product summarizationPage 15
5.1 Operating Environment
LED Studio, programmed and produced for LED by the Program Team
of LED Studio, is a powerful, practical and easy to learn software for
making or playing programs, supporting a range of formats, such as txt
files, doc f iles, pictures (BMP, JPG, GIF, PCX) and cartoons (MPG,
MPEG, MPV, MPA, AVI, VCD, SWF, RM, RA, RMJ, ASF)
Operating system
Chinese/English Windows98/me/2000/NT/XP
Hardware Configuration
Pentium 300MHz or above
ROM: 64M
Graphic Card: Standard VGA 256 mode or above with DVI port
Note: Recommend to use above 128 M memory of individual graphic card.
Related Software
Microsoft Media player--compulsory
OFFICE2000in case of *.doc files
RealPlayerin case of RealPlayer files
Chapter 5 Software installation
-
5/24/2018 General Manual of Strip Curtain
20/48
Product summarization Page 16
5.2 Driver installation
Put the "LED Studio" installation CD into the CD-ROM, then it will
enter installation state automaticly, just follow the hint to operate.
First, install DirectX series program files, then install Graphic card
driver; (specific operation please refer "Graphic card setup" as
below).
Play software.
Install special software LED studio for big screen, or other controlsoftware.
Insert LED studio to CD-ROM, copy or install all the program files to
computer.
5.3 Graphic card setup
Take GeForce 8600 GT as an example for Graphic card setup.
Step 1: Right-click the blank of the desktop, there will pop up drop-down menu, and choose "PROPERTIES" to open the display properties
dialog box. (Figure 1)
Figure 1
-
5/24/2018 General Manual of Strip Curtain
21/48
Product summarizationPage 17
Step 2: Click "SETUP" item, you can adjust resolution, refresh rate and
color setup of the computer. (Figure 2)
Step 3: Click the "ADVANCED" option in the "setup", there will pop up
plug-and-play Monitor and graphic card setup (Figure 3)
Step 4: Click "The GeForce 8600 GT" to enter the graphic card setup
(Figure 4).
Right-click of the mouse
in the b lank o f the
desktop, there will pop
up a menu as the left.
Cl ick "Propert ies" Open
display property panel.
Set Display Mode to 1024768
Note: If set the refresh rate over the range of the
monitor, the monitor can not show, just press the
"ESC" key or wait 15 seconds (Remember, do not
press "Enter" key), the system will automatically
revert to the original setup.
Figure 2
Figure 3
Set Screen Refreshing rate to: 60 Hz
-
5/24/2018 General Manual of Strip Curtain
22/48
Product summarization Page 18
Step 5: Click the drop-down button near "nVIew" , select "CLONE"
mode in the drop-down menu, and click OK to complete graphic card
setup. (Figure 5)
If two or more display device
were connected, there will
appear [nView Display Mode]
option in the driver.
If one of them can not be
identified after two or more
display device were connected,
you can choose [De tec t
Displays] to nd the problem.
Select [Clone] in [nView] options,
there will be two menu in the [Main
Monitor] and [Subsidiary Monitor]
as below, you can choose one
of groups for the current display
result.
Note: The Main Monitor and
Subs id iary Moni tor can be
exchanged each other.
Figure 4
Figure 5
nView:Main Monitor
Subsidiary Monitor
-
5/24/2018 General Manual of Strip Curtain
23/48
Product summarizationPage 19
Step 1: Double-cl ick the icon of "LED Studio8" and it wil l pop-up
"Select Language" dialog.
Step 2: Choose Engl ish i tem, c l ick "OK" to enter LED software
installation guide.
5.4 LED studio installation
-
5/24/2018 General Manual of Strip Curtain
24/48
Product summarization Page 20
Step 3: Click Next to enter the following dialog box. Fill in the name,
company, and then enter the serial number "888888" Click Next will
enter registered users information window.
-
5/24/2018 General Manual of Strip Curtain
25/48
Product summarizationPage 21
Step 4: Click Next to enter software installation directory dialog box.
Click "BROWSE" to choose the path for reserve, click Next to enter
"installation option" after the completion of setup, click "NEXT" to
complete software installation.
-
5/24/2018 General Manual of Strip Curtain
26/48
Product summarization Page 22
Step 1: click "SOFTWARE SETUP" in the "OPTION" menu (Figure 1)
Step 2: Input "LINSN" password directly in the pop-up "SOFTWARE SETUP"
window. (password window has been hidden, direct input password, "password
input window" will pop up) will pop up window to input password, then input
"168 " to parameter window for hardware setup.
5.5 LED studio setup
Figure 1
Figure 2
-
5/24/2018 General Manual of Strip Curtain
27/48
Product summarizationPage 23
Step 3: Click "RECEIVER" to choose " LOADING FROM THE FILE", find
GLUX le in the pop-up dialog box (*.rcg le as the product type), click "SEND
TO RECEIVER", then click "
SAVE TO RECEIVER". (Note: none but send to
receiver rst, and save to receiver can be clicked, and then save to receiver)
(Figure 4)
Figure 4
Figure 3
Note:
The display mode of
sender and computer
should be consistent:
1024 768. If need to
restore former settings,click Default and save to
sender.
Note:
If could restore correctsettings when you set
parameters in receiver,
you can load GLUX file
from the document, send
it to the receiver, and
then save it to receiver
to restore the correct
settings.
-
5/24/2018 General Manual of Strip Curtain
28/48
Product summarization Page 24
Step 4: Click "DISPLAY CONNECTION" to set large LED screen connection.
According to the screen size, set QTY for level card and vert ical card.
According to the pixels of different screens set its width and height. The
connection method of the screen should be consistent with the general
signal cable of the spot installation.Once setup is complete, click "SEND TO
RECEIVER" to send the parameters to receiver. Finally, click "SAVE TO
RECEIVER" to complete software setup. (Note: The connection method should
be the same with the facade of the spot installation, or it wont be formed a big
screen.)
Figure 5
Set the parameters
according to the
characteristic of different
displays.
set the card number of level and vertical
according to the number of rows and
columns of the spot installation displays.
Set the width and height according to the
pixel of single-block display. The pixel of
B3720DC is: 16 16; the pixel of B1860DC
and B1830DC is: 32 32
Viewing from the facade of
the spot of the screen, the
connection method of the
screen should be consistent
with the general signal cable
of the spot installation, or it
wont be formed a big screen.
The main cable: the setup
of the 1st sending card U
cable and D cable should
be corresponding with the
LAN port setup of CM-08
System, the general default
of software system is the 1st
sending card U cable.
-
5/24/2018 General Manual of Strip Curtain
29/48
Product summarizationPage 25
Chapter 6 Strip Curtain operation
Step 1: Double-click Ledstudio8 in the desktop. LED studio will be opened.
(Figure 1, 2)
Figure 1
Figure 2
-
5/24/2018 General Manual of Strip Curtain
30/48
Product summarization Page 26
Step 2: Click "SOFTWARE SETUP" in the "Option" menu, and the software
Setup dialog box will be opened. (Figure 3)
Step 3: Click "PLAY" items, select "ARBITRARY SETUP" to change the
Figure 3
Figure 4
-
5/24/2018 General Manual of Strip Curtain
31/48
Product summarizationPage 27
quantity, size and location of screen. You can change the quantity "1" from
2 to 99, click update screen" button, then there will be 2 to 99 LED large
screens on the desktop. When finish all parameter setup, click "SAVE
SETUP". (Note: If you choose "LOCK TO LARGE LED SCREEN", then you
can not change the location and size of large LED screen) (Figure 5)
Step 4: Click "ALLOW TO EDIT" and LED studio window can be opened.
(Figure 6)
You can change the number
of LED big screen in Screen
Quantity, the maximum is 99
screens.
You can change its size and
location in LED screen 1.
Figure 5
Figure 6
-
5/24/2018 General Manual of Strip Curtain
32/48
Product summarization Page 28
Step 5: Click "NEW PAGE OF PROGRAM" the "ADD UNIVERAL DISPLAY"
, "ADD STEP" will be opened, choose "ADD UNIVERAL DISPLAY", then
click "NEW PAGE OF PROGRAM" , choose "ADD STEP" .(Figure 7, 8)
Step 6: Click "NEW PAGE OF PROGRAM", then these windows will
be opened: "FILE WINDOW", "TEXT WINDOW", "SINGLE LINE TEXT
WINDOW", "STATIC TEXT WINDOW", "TABLE WINDOW", "TIME
WINDOW", "DATABASE WINDOW", "VCD/DVD WINDOW", "EXTERNAL
EXE WINDOW " , "VIDEO WINDOW " , "DATE/TIME WINDOW " ,
"TEMPERATURE/HUMIDITY WINDOW", "GEOMETRIC SHAPE WINDOW".
Choose "FILE WINDOW" to do setup in it. (Figure 9)
Figure 7
Figure 8
-
5/24/2018 General Manual of Strip Curtain
33/48
Product summarizationPage 29
Step 7: Click "increase le", choose the les, click "open" (Figure 10)
Step 8: Revising the playing location and size in "le program window", and
Figure 9
Figure 10
-
5/24/2018 General Manual of Strip Curtain
34/48
Product summarization Page 30
set frame as "no" (Figure 11)
Step 9: After the adjustment for all playing content, click "play from current
program page" to cycle play picture and video. (Figure 12)
Figure 11
You can adjust the size and
location of player window
and remove its frame.
Figure 12
-
5/24/2018 General Manual of Strip Curtain
35/48
Product summarizationPage 31
Chapter 7 Daily maintenanceReplace LED strip: remove the nut of the upper and lower beams with the
same specific nut wrench then replace the good strip and lock the nut.
(Note: Please take care of the pin which can not be bended when insert
the strip, avoiding short-circuit.)
Only half LED strip is bright: Because the power supply is bad. Remove
all the LED strip of the Strip Curtain and the the plugs at two ends of
beams, remove the signal hexagonal nut and power connector. Then
replace the power supply.The whole screen is dead: make sure the graphic card is "clone" mode.
Check the signal and power cables are working properly or not. If these
operations are normal, then re-load Glux RCG file to the scanning card
and the screen will be lit up.
One tile of the screen is dead, and the other which connect with it are
light: scanning card instable or failed. The swiftest way to solve the
problem of instable scanning card is to disconnect the power supply and
do reset, then the screen will be light. If need to maintain the instablecard, remove the the plugs at two ends of beam, remove the signal
hexagonal nut and power connector. Then replace the power supply.
If screen is light, but RGB color can not be superposable and doesnt
display pictures normally, re-load Glux RCG file to the scanning card.
Regular inspection the locking bolts, timely adjust the loosing, reinforce
the hanging pieces.
Control system can be not found every time you start LED studio, check
the connection of RS232 data cable between COM port and sending
card or LED studio version is not compatible with the sending card in the
controller or COM port is bad. Connect the data cable, update LED studio
version or replace a good computer.
The whole screen shaking or double ghost: check the signal cable
between the screen and controller, check DVI port of graphic card and
controller is loosing or not, graphic card or sending card is bad. Replace
signal or DVI cable, reinforce DVI port of graphic card and controller,
replace graphic card or sending card.
-
5/24/2018 General Manual of Strip Curtain
36/48
Product summarization Page 32
Chapter 8 Addenda
8.1 Way to make Signal cable
Step 1: use twisted pair
first Peel twisted pair
skin about 3 centimeters
with tool, then it looks
like Figure 1.
Step 2: Making paircable. The standard
for pair cable is EIA/
TIAT568B (Figure 2).
Ensure that: 1-2 is a pair cable; 3-6 is a pair cable; 4-5 is a pair
cable; 7-8 is a pair cable. Both ends of the cable are T568B standard.
According to Figure 2, the order for the cables is like th is: (1-white
orange, 2-orange, 3-white green, 4-blue, 5-white blue, 6-green, 7-white
brown, 8-brown). It is important to note that green cable must gobeyond the blue cable. It is often made mistake by putting white green
cable and green cable together, this will cause crosstalk and reduce
the transmission efficiency.
Step 3: After making pair cable, tidy the
cables and cut the bare twisted pair with
special pliers, only about 15 mm left,
and tidy the ends of the cables, lay the
cables as Figure 3, put each of cable of
the twisted pairs into the pinhold of RJ45
connector, white orange cable is for the
first pinhold, and the rest is analogic.
Step 4: Make sure all the twisted pair
has been placed correctly, connect RJ45
connector with pliers, finished RJ45
connector is like Figure 4:
Figure 1 Figure 2
Figure 3
Figure 4
-
5/24/2018 General Manual of Strip Curtain
37/48
Product summarizationPage 33
Step 5: Way to connect plug in another end: first, twist off the plugs
(Figure 5, Figure 6), then weld the cables in accordance with thenumbers on the plug and the color of the cables. Put hot sol to finish
making signal cable. (1-white orange, 2-orange, 3-white green 4-blue,
5-white blue, 6-green, 7-white brown, 8-brown, 9-empty)
Step 6: Finish (Figure 7)
Figure 5 Figure 6
Figure 7
-
5/24/2018 General Manual of Strip Curtain
38/48
Product summarization Page 34
Step 1: Open LED studio, click "NEW PAGE OF PROGRAM" button,
"ADD STEP" and "WHOLE PROGRAMME PAGE" can be opened, choose
"ADD UNIVERAL DISPLAY", then click "NEW PAGE PROGRAMME" and
choose "NORMAL PROGRAMME PAGE".
Step 2: Click "NEW PAGE OF PROGRAM" button, "FILE WINDOW" and
"TEXT WINDOW" and other program names will be opened. Choose
"FILE WINDOW" to open the setup in it. Starting point X: set as " 0",
Starting point Y: set as "0". The width and height set by customer.
Then click "INCREASE FILE", finding the video to play.
8.2 Multiscreen setup
Picture1
-
5/24/2018 General Manual of Strip Curtain
39/48
Product summarizationPage 35
Step 3: Click "NEW PAGE OF PROGRAM" button, "FILE WINDOW" and
"TEXT WINDOW" and other program names will be opened. Choose
"FILE WINDOW" to open the setup in it. Starting point X: set as "0", Starting
point Y: set as "0". The width and height set by customer. Here, set X "100"
and Y "200", then click "INCREASE FILE", nding the video to play.
Step 4: Click "NEW PAGE OF PROGRAM" button, "FILE WINDOW" and
"TEXT WINDOW" and other program names will be opened. Choose "FILE
WINDOW" to open the setup in it. Starting point X: set as " 200",
Starting point Y: set as "0". The width and height set by customer.
Here, set X "100" and Y "200", then click "INCREASE FILE", finding the
video to play.
Picture2
Picture3
-
5/24/2018 General Manual of Strip Curtain
40/48
Product summarization Page 36
Step 5: After al l setup are f inished, cl ick " PLAY FROM CURRENT
PROGRAM PAGET" button to finish playing different picture or video.
Picture1 Picture2 Picture3
-
5/24/2018 General Manual of Strip Curtain
41/48
Product summarizationPage 37
8.3 Display character on picture or video
Step 1: double-click and open "LED studio". Click "NEW PAGE OF
PROGRAM" button, "ADD UNIVERAL DISPLAY" and "ADD STEP" will be
opened, choose "ADD UNIVERAL DISPLAY", then click "NEW PAGE OF
PROGRAM" and choose "ADD STEP".
Step 2: Cl ick "NEW PAGE OF PROGRAM" button, these windows
wil l be opened: "FILE WINDOW", "TEXT WINDOW", "SINGLE LINE
TEXT WINDOW" , "STATIC TEXT WINDOW" , "TABLE WINDOW" ,
"TIME WINDOW" , "DATABASE WINDOW" , "VCD/DVD WINDOW" ,
"EXTERNAL EXE WINDOW", "VIDEO WINDOW", "DATE/TIME WINDOW",
"TEMPERATURE/HUMIDITY WINDOW" and "GEOMETRIC SHAPE
WINDOW". Choose "STATIC TEXT" to open the setup in it.
-
5/24/2018 General Manual of Strip Curtain
42/48
Product summarization Page 38
Step 3: input words to play in the "text", click the check box near
"TRANSPARENT". At the beginning point X and Y, change the width and
height of the static text play window. Set frame as "NO". Other effects
setup set by customer.
Step 4: Cl ick "NEW PAGE OF PROGRAM" but ton, choose "FILE
WINDOW" to do setup in "file" window at right. Adjust the size and
window frame, then click "INCREASE FILE" button, there will pop up the
path window for playing file, choose the picture or video to play, click
"OPEN".
-
5/24/2018 General Manual of Strip Curtain
43/48
Product summarizationPage 39
Step 5: After finishing the setup in "file" window at right, click "PLAY
FROM CURRENT PROGRAM PAGE" button to cycle play pictures or
words on the video.
-
5/24/2018 General Manual of Strip Curtain
44/48
Product summarization Page 40
8.4 Play flowing subtitle on picture or video
Step 1: Double-click and open "LED studio". Click " NEW PAGE OF
PROGRAM" button, "ADD UNIVERAL DISPLAY" and "ADD STEP" will be
opened, choose "ADD UNIVERAL DISPLAY", then click "NEW PAGE OF
PROGRAM" and choose "ADD STEP".
Step 2: Cl ick "NEW PAGE OF PROGRAM" button, these windows
wil l be opened: "FILE WINDOW", "TEXT WINDOW", "SINGLE LINE
TEXT WINDOW" , "STATIC TEXT WINDOW" , "TABLE WINDOW" ,
"TIME WINDOW" , "DATABASE WINDOW" , "VCD/DVD WINDOW" ,
"EXTERNAL EXE WINDOW", "VIDEO WINDOW", "DATE/TIME WINDOW",
"TEMPERATURE/HUMIDITY WINDOW" and "GEOMETRIC SHAPE
WINDOW". Choose "SINGLE LINE TEXT" to do setup in "SINGLE LINE
TEXT WINDOW".
-
5/24/2018 General Manual of Strip Curtain
45/48
Product summarizationPage 41
Step 3: Input the file or words to be loaded to "EXTERNAL FILE" or
"TEXT", click the check box near "TRANSPARENT". At the beginning
point X and Y, change the width and height of the "SINGLE LINE TEXT
WINDOW". Choose special effect for subtile in "STUNTS",and choose
effect in the "EFFECT".
Step 4: Finishing all setup in single line text, click "NEW PAGE OF
PROGRAM" button, choose "FILE WINDOW" to do setup on the right
window. Adjust the size and position of the play window, then click
"INCREASE FILE" button, there will pop up the path window for playing
file, choose the picture or video to play, click "OPEN".
-
5/24/2018 General Manual of Strip Curtain
46/48
Product summarization Page 42
Step 5: After the adjustment of Setup at the right of " FILE" window,
click "PLAY FROM THE CURRENT PROGRAM PAGE" button to cycle
play pictures or video flowing subtitle.
-
5/24/2018 General Manual of Strip Curtain
47/48
Product summarizationPage 43
-
5/24/2018 General Manual of Strip Curtain
48/48
top related