how to use the scanner
Post on 23-Feb-2016
33 Views
Preview:
DESCRIPTION
TRANSCRIPT
How to use the scanner• This process will
teach you how to use the scanner
• Press yellow button to turn power on
• In the top left corner tap “start”
Asset Advantage• In the drop down
menu tap “Asset Advantage”
• Then tap “Asset Inventory”
When asked for the date• Make sure you are in
the current month• If you are in the
current month tap “NEXT”
LOCATIONS• You will first need to
scan the door tag• The scanner will beep• It will replace any
numbers currently in this field
• Look at the room number to make sure it is correct
• Then tap “OK”
Inventory-Entry• First Check the “quick
scan box”• Then scan the first
asset
Scanning an Asset
• When you scan the first asset it will ask you “Unlisted item add to inventory”
• First check the box that says “do not show again”
• Then tap “yes”• Now scan all items in this
room
Changing locations• When you are finished
scanning a room you must change the location
• Go to the bottom and tap “mode”
• Then tap “Location”• It will go back to the
location screen• You must do this step
every time you enter a new room!
LOCATIONS• You will be back at
the location screen • Repeat the above
processes for every room and it’s items
top related