iglidur® bearings for automotive industry

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

Chassis Brake caliper Transmission Transmission kinematics Steering systems EGR valve

ABS pump Throttle valve Belt tensioner Variable air intake Variable air intake II Turbocharger

Pedal systems Convertible hinges Hinges Seat systems Hookshot - roll Convertible systems

Sun roof Mirror systems Wiper Wiper kinematics Driver’s cab damper Center arm rest

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

Benefits of iglidur® J for this application:• Low clearance version with pretensioned bearings• Glides even on PA-GF shafts• Resistant to edge loads• High static loads• Quiet operation• Maintenance free

iglidur® J in pedal boxes

Application:

iglidur® J in pedal boxes

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

Benefits• Quiet operation• High static load• Compensation of tolerances by recalibration during e-coating• Low precision shaft possible

Applications in seating systems

iglidur® GLW / G / RN56 bearings

Used for lift links, headrest, screw drive

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

Benefits:• No contact corrosion• High compressive strength• Compensation of tolerances• Dirt resistant• Economically priced• E-coating compatible• Conductive materials available (iglidur® RN89)

Hinges

iglidur® bearings in door hinges, rear door hinges, etc.

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

Benefits of iglidur® for this application:• Corrosion free• High flexural fatigue strength• High static loads• Dirt resistant• Cost efficient• High precision (0.03 mm with plug gage)

iglidur® H2 in wipers

Application:

iglidur® bearing in wiper kinematics

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414

• For more automotive applications and details please visit

• www.igus.in/automotive

For further details please contact – santhosh@igus.in/Sandesh@igus.in 09341075414