index
Post on 30-Oct-2014
270 Views
Preview:
DESCRIPTION
TRANSCRIPT
BRITISH STANDARDS
BS 4:-Structural steel sections
BS 4-1:2005
Specification for hot-rolled sectionssupersedes BS 4-1:1993ISBN 0 580 46453 9
£32.00 members£64.00 non-members
ISE/13
BS 4551:2005
Mortar. Methods of test for mortar. Chemical analysis and physical testingsupersedes BS 4551-1:1998 and BS 4551-2:1998ISBN 0 580 46454 7
£53.00 members£106.00 non-members
B/519/2
BS 5261:-
Copy preparation and proof correction
BS 5261-2:2005
Specification for typographic requirements, marks for copy preparation and proof correction, proofing proceduresupersedes BS 5261-2:1976ISBN 0 580 46570 5
£32.00 members£64.00 non-members
PAI/43
BS 5261C:2005
Marks for copy preparation and proof correctionsupersedes BS 5261C:1976
£5.00 members£5.00 non-members
PAI/43A fold-out card giving the marks specified in Table 1 of BS 5261-2, together with notes on their use. VAT is applicable to this item. Discounts are available for bulk orders (£42 for 10, £79 for 20, £189 for 50, £325 for 100).
BS 6001:-
Sampling procedures for inspection by attributes
BS 6001-4:2005
System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspectionpartially supersedes BS 6001-4:1994ISBN 0 580 46463 6
£64.00 members£128.00 non-members
SS/5
BS 8432:2005Spinal orthoses. Guide to design
supersedes BS 5473:1977ISBN 0 580 46050 9
£32.00 members£64.00 non-members
SS/5
BS 8440:-
Health informatics. Medical digital imaging. Profiles format
BS 8440-1:2005General principles
no current standard is supersededISBN 0 580 46549 7
£26.00 members£52.00 non-members
IST/35
BS 8440-2:2005
Particular requirements for metadata profilesno current standard is supersededISBN 0 580 46550 0
£26.00 members£52.00 non-members
IST/35
BS 8456:2005
Code of practice for design and installation of directional sounder evacuation systemsno current standard is supersededISBN 0 580 46416 4
£26.00 members£52.00 non-members
CPL/34/9
BS EN PUBLICATIONS
BS EN 54:-
Fire detection and fire alarm systems
BS EN 54-13:2005
Compatibility assessment of system componentsno current standard is supersededISBN 0 580 46213 7
£46.00 members£92.00 non-members
FSH/12,FSH/12/1
BS EN ISO 140:-
Acoustics. Measurement of sound insulation in buildings and of building elements
BS EN ISO 140-11:2005
Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floorsno current standard is supersededISBN 0 580 46445 8
£53.00 members£106.00 non-members
EH/1/6
BS EN 1052:-Methods of test for masonry
BS EN 1052-5:2005
Determination of bond strength by the bond wrench methodno current standard is supersededISBN 0 580 46380 X
£32.00 members£64.00 non-members
B/519
BS EN 1168:2005
Precast concrete products. Hollow core slabsno current standard is supersededISBN 0 580 46082 7
£64.00 members£128.00 non-members
B/524
BS EN ISO 2063:2005
Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloyssupersedes BS EN 22063:1994ISBN 0 580 46219 6
£46.00 members£92.00 non-members
STI/40
BS EN ISO 3815:-Zinc and zinc alloys
Page 1 of 69BS EN PUBLICATIONS
BS EN ISO 3815-1:2005
Analysis of solid samples by optical emission spectrometrysupersedes BS EN 12019:1998 which remains currentISBN 0 580 46225 0
£32.00 members£64.00 non-members
NFE/8
BS EN ISO 5983:-
Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content
BS EN ISO 5983-1:2005Kjeldahl method
supersedes BS 5766-4:1998ISBN 0 580 46421 0
£32.00 members£64.00 non-members
AW/10
BS EN ISO 5983-2:2005
Block digestion/steam distillation methodno current standard is supersededISBN 0 580 46420 2
£46.00 members£92.00 non-members
AW/10
BS EN 10305:-
Steel tubes for precision applications. Technical delivery conditions
BS EN 10305-6:2005
Welded cold drawn tubes for hydraulic and pneumatic power systemssupersedes BS 6323-6:1982ISBN 0 580 46097 5
£46.00 members£92.00 non-members
ISE/8
BS EN 10311:2005
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquidspartially supersedes BS 534:1990ISBN 0 580 46124 6
£46.00 members£92.00 non-members
ISE/8
BS EN ISO 10664:2005
Hexalobular internal driving feature for bolts and screwssupersedes BS EN ISO 10664:1999ISBN 0 580 46442 3
£32.00 members£64.00 non-members
FME/9/2
BS EN ISO 11064:-
Ergonomic design of control centres
BS EN ISO 11064-6:2005
Environmental requirements for control centresno current standard is supersededISBN 0 580 46422 9
£46.00 members£92.00 non-members
PH/9
BS EN ISO 12625:-Tissue paper and tissue products
BS EN ISO 12625-3:2005
Determination of thickness, bulking thickness and apparent bulk densitysupersedes BS EN 12625-3:1999ISBN 0 580 46435 0
£32.00 members£64.00 non-members
PAI/11
BS EN ISO 12625-4:2005
Determination of tensile strength, stretch at break and tensile energy absorptionsupersedes BS EN 12625-4:1999ISBN 0 580 46436 9
£32.00 members£64.00 non-members
PAI/11
BS EN ISO 12625-9:2005
Determination of ball burst strengthno current standard is supersededISBN 0 580 46437 7
£32.00 members£64.00 non-members
PAI/11
BS EN 12629:-
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
BS EN 12629-6:2004
Stationary and mobile equipment for the manufacture of precast reinforced productsno current standard is supersededISBN 0 580 46113 0
£53.00 members£106.00 non-members
MCE/3/7
BS EN 12697:-
Bituminous mixtures. Test methods for hot mix asphalt
BS EN 12697-43:2005Resistance to fuel
no current standard is supersededISBN 0 580 46257 9
£32.00 members£64.00 non-members
B/510/1
BS EN 12921:-
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours
BS EN 12921-4:2005
Safety of machines using halogenated solventsno current standard is supersededISBN 0 580 46359 1
£53.00 members£106.00 non-members
MCE/3/8
BS EN 13060:2004Small steam sterilizers
supersedes BS 3970-4:1990ISBN 0 580 46187 4
£64.00 members£128.00 non-members
LBI/35
BS EN 13367:2005
Ceramic machines. Safety. Transfer platforms and carsno current standard is supersededISBN 0 580 46428 8
£46.00 members£92.00 non-members
MCE/3/14
BS EN 13630:-
Explosives for civil uses. Detonating cords and safety fuses
Page 2 of 69BS EN PUBLICATIONS
BS EN 13630-10:2005
Determination of initiating capability of detonating cordsno current standard is supersededISBN 0 580 46246 3
£26.00 members£52.00 non-members
CII/61
BS EN 13796:-
Safety requirements for cableway installations designed to carry persons. Carriers
BS EN 13796-3:2005Fatigue tests
no current standard is supersededISBN 0 580 46155 6
£26.00 members£52.00 non-members
MCE/20
BS EN 13885:2005
Food processing machinery. Clipping machines. Safety and hygiene requirementsno current standard is supersededISBN 0 580 46254 4
£60.00 members£120.00 non-members
MCE/3/5
BS EN 14336:2004
Heating systems in buildings. Installation and commissioning of water based heating systemspartially supersedes BS 5449:1990ISBN 0 580 46251 X
£53.00 members£106.00 non-members
RHE/24
BS EN 14525:2004
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cementno current standard is supersededISBN 0 580 46203 X
£53.00 members£106.00 non-members
PSE/10
BS EN 14604:2005Smoke alarm devices
supersedes BS 5446-1:2000 which remains currentISBN 0 580 46651 5
£70.00 members£140.00 non-members
FSH/12/2
BS EN ISO 14630:2005
Non-active surgical implants. General requirementssupersedes BS EN ISO 14630:1998ISBN 0 580 46223 4
£46.00 members£92.00 non-members
CH/150
BS EN 14662:-
Ambient air quality. Standard method for measurement of benzene concentrations
BS EN 14662-5:2005
Diffusive sampling followed by solvent desorption and gas chromatographyno current standard is supersededISBN 0 580 46134 3
£53.00 members£106.00 non-members
EH/2/3
BS EN 14666:2005
Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic methodno current standard is supersededISBN 0 580 46360 5
£26.00 members£52.00 non-members
CII/34
BS EN 14712:2005
Surface active agents. Determination of physical stability in alkaline and acid solutionsno current standard is supersededISBN 0 580 46101 7
£26.00 members£52.00 non-members
CII/34
BS EN 14733:2005
Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production controlno current standard is supersededISBN 0 580 46159 9
£32.00 members£64.00 non-members
B/510/19
BS EN ISO 17707:2005
Footwear. Test methods for outsoles. Flex resistanceno current standard is supersededISBN 0 580 46424 5
£26.00 members£52.00 non-members
TCI/69
BS EN 50131:-Alarm systems. Intrusion systems
BS EN 50131-5-3:2005
Requirements for interconnections equipment using radio frequency techniquesno current standard is supersededISBN 0 580 46135 1
£46.00 members£92.00 non-members
GW/1
BS EN 50370:-
Electromagnetic compatibility (EMC). Product family standard for machine tools
BS EN 50370-1:2005Emission
no current standard is supersededISBN 0 580 46136 X
£32.00 members£64.00 non-members
GEL/210/11
BS EN 60401:-
Terms and nomenclature for cores made of magnetically soft ferrites
BS EN 60401-1:2005
Terms used for physical irregularitiesno current standard is supersededISBN 0 580 46092 4
£32.00 members£64.00 non-members
EPL/51
BS EN 60480:2004
Guidelines for the checking and treatment of sulphur hexafluoride (SF$d6) taken from electrical equipment and specification for its re-usepartially supersedes BS 5209:1975ISBN 0 580 45947 0
£53.00 members£106.00 non-members
GEL/10
Page 3 of 69BS EN PUBLICATIONS
BS EN 60939:-
Passive filter units for electromagnetic interference suppression
BS EN 60939-2:2005
Sectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirementssupersedes BS EN 133200:1999 which remains currentISBN 0 580 46032 0
£60.00 members£120.00 non-members
EPL/40
BS EN 61241:-
Electrical apparatus for use in the presence of combustible dust
BS EN 61241-17:2005
Inspection and maintenance of electrical installations in hazardous areas (other than mines)partially supersedes BS EN 50281-1-2:1999, BS 6467-1:1985 and BS 6467-2:1988ISBN 0 580 46048 7
£46.00 members£92.00 non-members
GEL/31/20
BS EN 61243:-Live working. Voltage detectors
BS EN 61243-1:2005
Capacitive type to be used for voltages exceeding 1 kV a.csupersedes BS EN 61243-1:1998ISBN 0 580 45943 8
£64.00 members£128.00 non-members
PEL/78
BS EN 61249:-
Materials for printed boards and other interconnecting structures
BS EN 61249-2:-
Reinforced base materials, clad and unclad
BS EN 61249-2-1:2005
Phenolic cellulose paper reinforced laminated sheets, economic grade, copper cladno current standard is supersededISBN 0 580 45936 5
£32.00 members£64.00 non-members
EPL/501
BS EN 61249-2-22:2005
Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-cladno current standard is supersededISBN 0 580 45928 4
£46.00 members£92.00 non-members
EPL/501
BS EN 61249-2-23:2005
Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-cladno current standard is supersededISBN 0 580 45927 6
£32.00 members£64.00 non-members
EPL/501
BS EN 61290:-Optical amplifiers. Test methods
BS EN 61290-11:-
Polarization mode dispersion parameter
BS EN 61290-11-2:2005
Poincare$1P sphere analysis methodno current standard is supersededISBN 0 580 46049 5
£32.00 members£64.00 non-members
GEL/86/3
BS EN 61300:-
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
BS EN 61300-2:-Tests
BS EN 61300-2-44:2005
Flexing of the strain relief of fibre optic devicesno current standard is supersededISBN 0 580 46047 9
£26.00 members£52.00 non-members
GEL/86/2
BS EN 61754:-Fibre optic connector interfaces
BS EN 61754-21:2005
Type SMI connector family for plastic optical fibreno current standard is supersededISBN 0 580 46043 6
£32.00 members£64.00 non-members
GEL/86/2
BS EN 62044:-
Cores made of soft magnetic materials. Measuring methods
BS EN 62044-2:2005
Magnetic properties at low excitation levelno current standard is supersededISBN 0 580 46042 8
£53.00 members£106.00 non-members
EPL/51
BS EN 62115:2005Electric toys. Safety
supersedes BS EN 50088:1996 which remains currentISBN 0 580 46091 6
£53.00 members£106.00 non-members
CPL/61/21
BS IMPLEMENTATIONS
BS ISO 248:2005
Rubber, raw. Determination of volatile-matter contentsupersedes BS 7164-6.1:1994ISBN 0 582 46505 5
£32.00 members£64.00 non-members
PRI/23
BS ISO 727:-
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure
BS ISO 727-2:2005Inch-based series
supersedes BS ISO 727-2:2002ISBN 0 580 46232 3
£26.00 members£52.00 non-members
PRI/88/2
Page 4 of 69BS IMPLEMENTATIONS
BS ISO 1830:2005
Paper, board and pulps. Determination of acid-soluble manganesesupersedes BS 4897-4:1983ISBN 0 580 46444 X
£26.00 members£52.00 non-members
PAI/11
BS ISO 2108:2005
Information and documentation. International standard book number (ISBN)no current standard is supersededISBN 0 580 46234 X
£46.00 members£92.00 non-members
IDT/2/18
BS ISO 3575:2005
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualitiesno current standard is supersededISBN 0 580 46469 5
£32.00 members£64.00 non-members
ISE/10
BS ISO 3865:2005
Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic materialsupersedes BS ISO 3865:1997ISBN 0 580 46389 3
£32.00 members£64.00 non-members
PRI/22
BS ISO 4087:2005
Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilmsupersedes BS ISO 4087:1991ISBN 0 580 46429 6
£32.00 members£64.00 non-members
IDT/1/2
BS ISO 4249:-
Motorcycle tyres and rims (code-designated series)
BS ISO 4249-3:2004Rims
no current standard is supersededISBN 0 580 46210 2
£32.00 members£64.00 non-members
AUE/4
BS ISO 5168:2005
Measurement of fluid flow. Procedures for the evaluation of uncertaintiessupersedes BS ISO TR 5168:1998ISBN 0 580 46279 X
£70.00 members£140.00 non-members
CPI/30/9
BS ISO 6588:-
Paper, board and pulps. Determination of pH of aqueous extracts
BS ISO 6588-1:2005Cold extraction
partially supersedes BS 2924-1:1983ISBN 0 580 46438 5
£32.00 members£64.00 non-members
PAI/11
BS ISO 7141:2005
Road vehicles. Light alloy wheels. Impact testno current standard is supersededISBN 0 580 46270 6
£26.00 members£52.00 non-members
AUE/4
BS ISO 7341:2005
Banking. Nostro accounts reconciliationsupersedes BS ISO 7341:2000ISBN 0 580 46209 9
£46.00 members£92.00 non-members
IST/12
BS ISO 7867:-
Tyres and rims (metric series) for agricultural tractors and machines
BS ISO 7867-1:2005
Tyre designation, dimensions and marking, and tyre/rim coordinationsupersedes BS AU 50-1.4.5a:1996ISBN 0 580 46472 5
£46.00 members£92.00 non-members
AUE/4
BS ISO 7981:-
Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)
BS ISO 7981-1:2005
Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extractionno current standard is supersededISBN 0 580 46410 5
£46.00 members£92.00 non-members
EH/3/2
BS ISO 7981-2:2005
Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extractionno current standard is supersededISBN 0 580 46411 3
£46.00 members£92.00 non-members
EH/3/2
BS ISO 8600:-
Optics and photonics. Medical endoscopes and endotherapy devices
BS ISO 8600-1:2005General requirements
supersedes BS ISO 8600-1:1997ISBN 0 580 46292 7
£32.00 members£64.00 non-members
CPW/172/5
BS ISO 8600-5:2005
Determination of optical resolution of rigid endoscopes with opticsno current standard is supersededISBN 0 580 46432 6
£26.00 members£52.00 non-members
CPW/172/5
BS ISO 8600-6:2005Vocabulary
no current standard is supersededISBN 0 580 46291 9
£26.00 members£52.00 non-members
CPW/172/5
BS ISO 13216:-
Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
Page 5 of 69BS IMPLEMENTATIONS
BS ISO 13216-2:2004
Top tether anchorages and attachmentsno current standard is supersededISBN 0 580 46208 0
£46.00 members£92.00 non-members
AUE/7
BS ISO 13899:-
Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method
BS ISO 13899-2:2005Determination of Nb Content
no current standard is supersededISBN 0 580 46377 X
£32.00 members£64.00 non-members
ISE/18
BS ISO 14420:2005
Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansionno current standard is supersededISBN 0 580 46452 0
£26.00 members£52.00 non-members
CII/24
BS ISO 14461:-
Milk and milk products. Quality control in microbiological laboratories
BS ISO 14461-2:2005
Determination of the reliability of colony counts of parallel plates and subsequent dilution stepsno current standard is supersededISBN 0 580 46093 2
£46.00 members£92.00 non-members
AW/9
BS ISO 14674:2005
Milk and milk powder. Determination of aflatoxin M$d1 content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatographyno current standard is supersededISBN 0 580 46228 5
£32.00 members£64.00 non-members
AW/5
BS ISO 15583:2005
Ships and marine technology. Maritime standards listno current standard is supersededISBN 0 580 46398 2
£74.00 members£148.00 non-members
SME/32/9
BS ISO 15634:2005
Iron ores. Determination of chromium content. Flame atomic absorption spectrometric methodpartially supersedes BS 7020-16:1993ISBN 0 580 46216 1
£32.00 members£64.00 non-members
ISE/58
BS ISO 16063:-
Methods for the calibration of vibration and shock transducers
BS ISO 16063-22:2005
Shock calibration by comparison to a reference transducersupersedes BS 6955-4:1994ISBN 0 580 46281 1
£46.00 members£92.00 non-members
GME/21/2
BS ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)no current standard is supersededISBN 0 580 46143 2
£32.00 members£64.00 non-members
PRI/88/4
BS ISO 16881:-
Cranes. Design calculation for rail wheels and associated trolley track supporting structure
BS ISO 16881-1:2005General
no current standard is supersededISBN 0 580 46470 9
£32.00 members£64.00 non-members
MHE/3/3
BS ISO 17247:2005Coal. Ultimate analysis
no current standard is supersededISBN 0 580 46089 4
£26.00 members£52.00 non-members
PTI/16
BS ISO 17356:-
Road vehicles. Open interface for embedded automotive applications
BS ISO 17356-2:2005
OSEK/VDX specifications for binding OS, COM and NMno current standard is supersededISBN 0 580 46477 6
£26.00 members£52.00 non-members
AUE/16
BS ISO/IEC 18033:-
Information technology. Security techniques. Encryption algorithms
BS ISO/IEC 18033-1:2005General
no current standard is supersededISBN 0 580 46144 0
£32.00 members£64.00 non-members
IST/33
BS ISO 18852:2005
Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)no current standard is supersededISBN 0 580 46233 1
£32.00 members£64.00 non-members
PRI/50
BS ISO 19109:2005
Geographic information. Rules for application schemano current standard is supersededISBN 0 580 46379 6
£70.00 members£140.00 non-members
IST/36
Page 6 of 69BS IMPLEMENTATIONS
BS ISO 24237:2005
Surface chemical analysis. X-ray photoelectron spectroscopy. Repeatability and constancy of intensity scaleno current standard is supersededISBN 0 580 46280 3
£32.00 members£64.00 non-members
CII/60
IT AND INFORMATION MANAGEMENT PUBLICATIONS AND PRODUCTSBIP 0018:2005
Simplifying the implementation of MPEG CD-ROMno current standard is supersededISBN 0 580 46110 6
£35.00 members£35.00 non-membersVAT is applicable to this item.
SPECIALIST BOOKS FROM BSIBIP 2073:2005Quality patient care in hospitals
no current standard is supersededISBN 0 580 45646 3
£30.00 members£30.00 non-members
ELECTRONIC PRODUCTS
BIP 0022:2005RA2 Art of risk CD-ROM
no current standard is superseded
£977.00 members£977.00 non-membersVAT is applicable to this item.
KITS, SETS, PACKS AND SERIESKIT 146Graphical symbols kit
no current standard is supersededISBN 0 580 33403 1
£149.00 members£298.00 non-membersSpecial offer. Includes BS 5499 Parts 1 to 6 and Part 11.
KIT 147Graphical symbols kit
no current standard is supersededISBN 0 580 33404 X
£206.00 members£412.00 non-membersVAT is applicable to this item. Special offer. Includes BS 5499 Parts 1 to 6 and Part 11 and EP 250 (Safety signs and symbols CD-ROM).
KIT 148Surface texture standards kit
no current standard is supersededISBN 0 580 33405 8
£395.00 members£790.00 non-membersSpecial offer. Includes BS EN ISO 1302, BS EN ISO 3274, BS EN ISO 4287, BS EN ISO 4288, BS EN ISO 8785, BS ISO 10135, BS EN ISO 11562, BS EN ISO 12085, BS EN ISO 13565 Parts 1 to 3, BS EN ISO 14253-1, BS EN ISO 14660-1 and BS EN ISO 81714-1.
KIT 162Structural bearings kit
no current standard is supersededISBN 0 580 33419 8
£258.00 members£516.00 non-membersSpecial offer. Includes BS EN 1337 Parts 1 & 2, 4, 6 & 7, and 9 to 11.
KIT 163Concrete standards kit
no current standard is supersededISBN 0 580 33420 1
£190.00 members£380.00 non-membersSpecial offer. Includes BS 8500 Parts 1 & 2, BS EN 206-1 and BIP 2001.
KIT 164Testing concrete in structures kit
no current standard is supersededISBN 0 580 33421 X
£67.00 members£134.00 non-membersSpecial offer. Includes BS EN 12504 Parts 1, 2 & 4.
KIT 165
Concrete paving requirements & test methods kitno current standard is supersededISBN 0 580 33422 8
£303.00 members£606.00 non-membersSpecial offer. Includes BS 6717, BS 7263-1, BS EN 1340, BS EN 1338, BS EN 1339, BS EN 12629-2, and BS EN 13863 Parts 1 & 2.
KIT 166Concrete paving kit
no current standard is supersededISBN 0 580 33424 4
£212.00 members£424.00 non-membersSpecial offer. Includes BS 7533 Parts 1 to 4, 6 to 8, 10 and 11.
KIT 167
Hot rolled products of structural steels kitno current standard is supersededISBN 0 580 33418 X
£232.00 members£464.00 non-membersSpecial offer. Includes BS EN 10025 Parts 1 to 6.
KIT 168
CE marking for insulating glass units kitno current standard is supersededISBN 0 580 33424 4
£615.95 members£806.00 non-membersSpecial offer. Includes BS EN 1279 Parts 1 to 4 and Part 6, and a manufacturer's toolkit (BIP 3001) on CD-ROM.
KIT 169Insulating glass units kit
no current standard is supersededISBN 0 580 33425 2
£191.00 members£382.00 non-membersSpecial offer. Includes BS EN 1279 Parts 1 to 4 and Part 6.
AMENDMENTS TO BRITISH STANDARDSBS 750:1984
Specification for underground fire hydrants and surface box frames and coversCORRIGENDUM 1 AMD 15667Updated standard:Please order by the reference:BS 750:1984£46.00 members£92.00 non-members
FSH/17Also incorporates Amendment 1, 2 and 3.
BS 2000:-
Methods of test for petroleum and its products
Page 7 of 69AMENDMENTS TO BRITISH STANDARDS
BS 2000-239:-
Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)See BS EN ISO 20623.
BS 6312:-
Connectors for analogue telecommunication interfaces
BS 6312-2:-
Sockets for use with plugs specified in BS 6312:Part 1
BS 6312-2.2:1997
Particular requirements for fixed socket-outlets used in permanent wiring installationsAMENDMENT 1 AMD 15632Updated standard:Please order by the reference:BS 6312-2.2:1997£32.00 members£64.00 non-members
TCT/2
BS 7499:2002
Static site guarding and mobile patrol services. Code of practiceAMENDMENT 1 AMD 15926Updated standard:Please order by the reference:BS 7499:2002£46.00 members£92.00 non-members
GW/3, GW/3/-/3
BS 8418:2003
Installation and remote monitoring of detector activated CCTV systems. Code of practiceAMENDMENT 1 AMD 15833Updated standard:Please order by the reference:BS 8418:2003£32.00 members£64.00 non-members
GW/1, GW/1/10
BS EN ISO 20623:2003(BS 2000-239:2004)
Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)AMENDMENT 1 AMD 15634Updated standard:Please order by the reference:BS EN ISO 20623:2003£16.65 members£22.20 non-members
PTI/13Also incorporates Corrigendum 1.
BS EN 60335:-
Specification for safety of household and similar electrical appliances
BS EN 60335-2:-Particular requirements
BS EN 60335-2-29:2004Battery chargers
AMENDMENT 1 AMD 15769Updated standard:Please order by the reference:BS EN 60335-2-29:2004£32.00 members£64.00 non-members
CPL/61, CPL/61/01Also incorporates Corrigendum 1.
UPDATED BRITISH STANDARDSBS 6037:-
Code of practice for the planning, design, installation and use of permanently installed access equipment
BS 6037-1:2003Suspended access equipment
AMENDMENT 1Updated standard:Please order by the reference:BS 6037-1:2003£46.00 members£92.00 non-members
B/514, B/514/39
BS EN 26:1998
Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burnersAMENDMENT 2Updated standard:Please order by the reference:BS EN 26:1998£74.00 members£148.00 non-members
GSE/34Also incorporates Amendment 1.
SPECIAL ANNOUNCEMENTS
NEW BT/TFServices of real estate agents
The Technical Board (BT) of the European Standardisation Agency (CEN) has proposed the establishment of a Technical Board/Task Force (BT/TF) to react to an application from the Austrian National Standards Body (ON). This application sets out to develop aContact: Ray KerriganEmail: ray.kerrigan@bsi-global.com
NONE
BS EN 1949:2002/A1
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles
No Draft for Public Comment was issued for this standard, which was amended by CEN/TC 181. Further information may be obtained from the contact point (below).Contact: Committee Service CentreEmail: csc@bsi-global.com
GSE/24
BS EN 50144:-
Safety of hand-held electric motor operated tools
Page 8 of 69SPECIAL ANNOUNCEMENTS
BS EN 50144-1:1999General requirements
This standard, which was withdrawn on 1 July 2005 in line with the national foreword to the superseding publication BS EN 60745-1:2003, is now to be re-instated.
Subsequent to publication of BS EN 60745-1 in May 2003 it was realised that a number of sContact: Geraldine SaltEmail: geraldine.salt@bsi-global.com
CPL/61/6
prEN ISO 12625:-Tissue paper and tissue products
prEN ISO 12625-7Determination of optical properties
This document has been issued for enquiry and is being reviewed by committee PAI/11. Copies are available upon request from the committee secretary (below).Contact: Sue BardenEmail: sue.barden@bsi-global.com
PAI/11
EN 13136:2001/A1
Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Method for calculation
The European document has recently been published and will shortly be made available in the UK as an amendment to BS EN 13136:2001 .Contact: Nyomee KyawEmail: nyomee.kyaw@bsi-global.com
RHE/18
prCEN/TS 14383:-
Prevention of crime. Urban planning and design
prCEN/TS 14383-4Shops and offices
This final draft has recently been received for FV (Formal Vote) and circulated to committee B/209/10. Further information is available from the committee secretary (below).Contact: Ranjit BhambraEmail: ranjit.bhambra@bsi-global.com
B/209/10
prCEN/TR 15352
Bitumen and bituminous binders. Development of performance-related specifications
This final draft has recently been received for FV (Formal Vote) and circulated to committee B/510/19. Further information is available from the committee secretary (below).Contact: Ranjit BhambraEmail: ranjit.bhambra@bsi-global.com
B/510/19
ISO/FDIS 8262:-
Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method)
ISO/FDIS 8262-3Special cases
This standard has been circulated to ISO members as a Final Draft International Standard (FDIS) by ISO/TC 34/SC 5. It incorporates minor revisions to the earlier version of the International standard. It has not been circulated as a Draft for Publlic ComContact: Committee Service CentreEmail: csc@bsi-global.com
AW/5
BRITISH STANDARDS PROPOSED FOR CONFIRMATIONBS 499:-Welding terms and symbols
BS 499-2C:1999
European arc welding symbols in chart form
WEE/1
BS 500:2000Steel sleepers
RAE/2/-/1
BS 873:-
Road traffic signs and internally illuminated bollards
BS 873-1:1983Methods of test
B/509
BS 873-2:1984
Specification for miscellaneous signs
B/509
BS 873-3:1980
Specification for internally illuminated bollards
B/509
BS 873-4:1987Specification for road studs
B/509
BS 873-7:1984Specification for posts and fittings
B/509
BS 1191:-
Specification for gypsum building plasters
BS 1191-1:1973
Excluding premixed lightweight plasters
B/544
BS 1191-2:1973Premixed lightweight plasters
B/544
BS 1230:-Gypsum plasterboard
BS 1230-1:1985
Specification for plasterboard excluding materials submitted to secondary operations
B/544
BS 1306:1975
Specification for copper and copper alloy pressure piping systems
PVE/10
BS 1369:-
Steel lathing for internal plastering and external rendering
BS 1369-1:1987
Specification for expanded metal and ribbed lathing
B/544
BS 1467:1972Specification for folders and files
FW/0
BS 1560:-
Circular flanges for pipes, valves and fittings (class designated)
Page 9 of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS 1560-3:-
Steel, cast iron and copper alloy flanges
BS 1560-3.2:1989Specification for cast iron flanges
PSE/15
BS 2737:1956
Terminology of internal defects in castings as revealed by radiography
WEE/46
BS 3143:-Road danger lamps
BS 3143-2:1990
Specification for low-intensity battery-operated lamps
B/509
BS 3143-4:1985
Specification for high intensity battery operated beacons
B/509
BS 3262:-
Hot-applied thermoplastic road marking materials
BS 3262-3:1989
Specification for application of material to road surfaces
B/509
BS 3273:1960
Specification for distant indicating thermometers for ships' refrigerated cargo spaces
SME/32
BS 3293:1960
Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
PSE/15
BS 3934:-
Mechanical standardization of semiconductor devices
BS 3934-10:1992
Schedule of UK national drawings giving dimensions
EPL/47
BS 4022:1970
Specification for prefabricated gypsum wallboard panels
B/544
BS 4089:1999
Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
PSE/12
BS 4263:1967
Specification for the marking of hatchway beams
SME/32
BS 4507:1969
Specification for grease gun cartridges (composite type)
GME/24
BS 4515:-
Specification for welding of steel pipelines on land and offshore
BS 4515-2:1999Duplex stainless steel pipelines
WEE/21/7
BS 5077:1974
Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507
GME/24
BS 5262:1991
Code of practice for external renderings
B/544
BS 5492:1990
Code of practice for internal plastering
B/544
BS 5873:-Educational furniture
BS 5873-1:1980
Specification for functional dimensions, identification and finish of chairs and tables for educational institutions
FW/0
BS 5873-2:1991
Specification for strength and stability of chairs for educational institutions
FW/0
BS 5873-3:1985
Specification for strength and stability of tables for educational institutions
FW/0
BS 5873-4:1998
Specification for strength and stability of storage furniture for educational institutions
FW/0
BS 5873-5:1998
Specification for security of fixed secure storage furniture for educational institutions
FW/0
BS 6129:-
Code of practice for the selection and application of bellows expansion joints for use in pressure systems
BS 6129-1:1981Metallic bellows expansion joints
PSE/14
BS 6130:-
Hose and hose assemblies for asphalt and bitumen
BS 6130-1:1993
Specification for flexible metallic hose and hose assemblies
PSE/12
BS 6222:-Domestic kitchen equipment
BS 6222-3:1999
Performance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification
FW/0
BS 6325:1982
Glossary of terms relating to black tea
AW/8
BS 6452:-
Beads for internal plastering and dry lining
BS 6452-1:1984
Specification for galvanized steel beads
B/544
BS 6571:-Vehicle parking control equipment
BS 6571-1:1989
Specification for coin operated clockwork parking meters
B/509
Page 10 of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS 6571-2:1989
Specification for electrically powered parking meters
B/509
BS 6571-4:1989
Specification for barrier type parking control equipment
B/509
BS 6571-6:1996
Specification for pay-on-foot parking control equipment
B/509/20
BS 6571-7:1997Specification for parking discs
B/509/20
BS 6571-8:1997
Specification for pre-purchased parking vouchers
B/509/20
BS 6779:-
Highway parapets for bridges and other structures
BS 6779-1:1998
Specification for vehicle containment parapets of metal construction
B/509/1
BS 6779-2:1991
Specification for vehicle containment parapets of concrete construction
B/509
BS 7364:1990
Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
B/544
BS 7449:1991
Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors
FW/0
BS 7777:-
Flat-bottomed, vertical, cylindrical storage tanks for low temperature service
BS 7777-1:1993
Guide to the general provisions applying for design, construction, installation and operation
PVE/15
BS 7777-2:1993
Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165$0DC
PVE/15
BS 7777-3:1993
Recommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings
PVE/15
BS 7777-4:1993
Specification for the design and construction of single containment tanks for the storage of liquid oxygen, liquid nitrogen and liquid argon
PVE/15
BS 7945:1999
Non-domestic furniture. Seating. Determination of stability
FW/0
BS 7962:2000
Black materials for masking existing road markings. Specification
B/509/2
BS 8212:1995
Code of practice for dry lining and partitioning using gypsum plasterboard
B/544/3
BS 9300 C199-276:1971
Detail specification for silicon voltage-regulator diodes
EPL/47
BS 9300 C377-378:1971
Detail specifications for silicon coaxial mixer diodes
EPL/47
BS 9300 C379-388:1971
Detail specifications for silicon stud mounted, power rectifier diodes
EPL/47
BS 9300 C476:1973
Detail specification for silicon avalanche rectifier diode
EPL/47
BS 9300 C534:1971
Detail specification for silicon coaxial resistive switching diode
EPL/47
BS 9300 C582-584:1971
Detail specifications for reverse blocking triode thyristors
EPL/47
BS 9300 C599:1971
Detail specification for silicon microwave switching diode, rod mounted
EPL/47
BS 9300 C667-668:1971
Detail specification for silicon avalanche rectifier diodes
EPL/47
BS 9300 C678-721:1971
Detail specification for silicon voltage regulator diodes
EPL/47
BS 9300 C762:1971
Detail specification for mixer diodes for use at X-band frequencies
EPL/47
BS 9300 C771-772:1971
Detail specification for coaxial mixer diodes
EPL/47
BS 9300 C776-777:1971
Detail specification for germanium coaxial mixer diodes
EPL/47
BS 9300 C778:1971
Detail specification for a matched pair of germanium coaxial mixer diodes
EPL/47
BS 9300 C780-831:1971
Detail specification for silicon voltage regulator diodes
EPL/47
Page 11 of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS 9300 C841-849:1971
Detail specification for silicon voltage regulator diodes
EPL/47
BS 9301 N002:1971
Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q
EPL/47
BS 9305 N001:1972
Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
EPL/47
BS 9305 N041:1972
Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
EPL/47
BS 9305 N042:1972
Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
EPL/47
BS 9305 N044:1974
Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
EPL/47
BS 9364 N007 and N009:1978
Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9364 N008 and N010:1978
Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
EPL/47
BS 9364 N011:1978
Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9364 N012:1978
Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
EPL/47
BS 9364 N013:1979
Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9364 N016:1979
Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9364 N017:1979
Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
EPL/47
BS 9430:1978
Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level
EPL/47
BS 9490:1975
Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level
EPL/47
BS 9493:1981
Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions
EPL/47
BS ISO 4708:2000
Composition cork. Gasket material. Test methods
PRI/81
BS ISO 4709:2000
Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking
PRI/81
BS ISO 4710:2000
Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics
PRI/81
BS ISO 4714:2000
Composition cork. Specifications, sampling, packaging and marking
PRI/81
BS ISO 7322:2000Composition cork. Test methods
PRI/81
PD 6430/1:1970
Extract (appendices A and B) from PD 6430: 'The adoption of the metric system in the marine industry: report, basic programme and guide. Units of the SI, their application and use in the marine industry'
SME/32
PD 6460:1971
Collected amendments to the CV7000 specifications for semiconductors adopted as British Standards (9300C series)
EPL/47
PD 7777:2000
Alternative steel selection and its effect on design and testing of tanks to BS 7777
PVE/15
PD ES 59008:-
Data requirements for semiconductor die
Page 12 of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION
PD ES 59008-1:2000General requirements
EPL/47
PD ES 59008-2:1999Vocabulary
EPL/47
PD ES 59008-3:1999
Mechanical, material and connectivity requirements
EPL/47
PD ES 59008-4:-
Specific requirements and recommendations
PD ES 59008-4-3:2000Thermal
EPL/47
PD ES 59008-4-4:2000Electrical simulation
EPL/47
PD ES 59008-6:-
Exchange data formats and data dictionary
PD ES 59008-6-1:1999Data exchange. DDX file format
EPL/47
BS MA 6:1970
Specification for internal doors and frames
SME/32
BS MA 7:1983
Specification for manholes with bolted covers
SME/32
BS MA 9:1970
Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes
SME/32
BS MA 10:1971Specification for oval eyeplates
SME/32
BS MA 11:1971Specification for horncleats
SME/32
BS MA 12:-
Specification for welded steel bollards
BS MA 12-1:1983Vertical type
SME/32
BS MA 12-2:1983Cruciform type
SME/32
BS MA 13:1972
Recommendations for the co-ordination of dimensions in shipbuilding: glossary of terms
SME/32
BS MA 14:1972
Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for components and assemblies
SME/32
BS MA 17:1972
Specification for derrick boom clamp
SME/32
BS MA 18:1973
Specification for salt water piping systems in ships
SME/32
BS MA 19:1973
Specification for panama-type fairleads
SME/32
BS MA 20:1973
Specification for presentation of ships' cargo gear particulars
SME/32
BS MA 21:1973
Specification for deck-end roller fairleads
SME/32
BS MA 22:1973
Specification for cast roller fairleads
SME/32
BS MA 23:1973
Specification for multi-angle roller fairleads
SME/32
BS MA 25:1973Specification for ships' windows
SME/32
BS MA 26:1973Specification for suction strainers
SME/32
BS MA 27:1974
Specification for sight-flow indicators for tank overflow systems
SME/32
BS MA 30:1973
Glossary of terms and graphical symbols for ships' deck machinery
SME/32
BS MA 31:1973
Specification for ships' deck machinery. Cargo winches
SME/32
BS MA 33:1973
Specification for ships' deck machinery. Warping winches
SME/32
BS MA 34:1973
Specification for ships' deck machinery. Capstans
SME/32
BS MA 35:1975
Specification for ships' deck machinery. Windlasses
SME/32
BS MA 36:1974
Specification for ships' deck machinery. Topping winches
SME/32
BS MA 37:1973
Specification for external doors (wood) for ships
SME/32
BS MA 39:-Specification for ships' ladders
BS MA 39-1:1973Ladders, steel vertical
SME/32
BS MA 39-2:1973Ladders, steel sloping
SME/32
BS MA 39-3:1973Ladders, steel dog-step
SME/32
BS MA 40:-
Specification for marine guardrails, stanchions, etc
Page 13 of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS MA 40-1:1975
Guardrails for merchant ships (excluding passenger ships)
SME/32
BS MA 40-2:1975
Gates and portable guardrail sections for merchant ships (excluding passenger ships)
SME/32
BS MA 40-3:1975Storm rails (exterior)
SME/32
BS MA 42:1975
Specification for ships' awnings and supports
SME/32
BS MA 44:1974
Recommendations for the co-ordination of dimensions in shipbuilding: principles of dimensional co-ordination
SME/32
BS MA 45:1974
Recommendations for the co-ordination of dimensions in shipbuilding: controlling dimensions
SME/32
BS MA 46:1973
Specification for cast iron mudboxes
SME/32
BS MA 49:1986
Summary and application of carbon steel tubes for marine pipework systems
SME/32
BS MA 52:1974
Specification for ships' deck machinery. Accommodation ladder winches
SME/32
BS MA 53:1975
Specification for ships' deck machinery. Towing winches for deep sea use
SME/32
BS MA 55:1975
Specification for ships' deck machinery. Lifeboat winches
SME/32
BS MA 56:1974
Specification for ships' deck machinery. Anchor cable stoppers
SME/32
BS MA 59:1974Specification for sea tubes
SME/32
BS MA 60:1986
Summary and application of copper and copper alloy tubes for ships' pipework systems
SME/32
BS MA 61:1974
Specification for bilge drain and suction hats
SME/32
BS MA 62:1974
Specification for weed grids for sea inlets
SME/32
BS MA 69:1976Specification. Ventilator heads
SME/32
BS MA 70:-
Specification for dimensions of anchor chain cables
BS MA 70-1:1975Stud-link anchor chain cables
SME/32
BS MA 71:1977
Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for internal subdivision
SME/32
BS MA 72:1976
Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for furniture
SME/32
BS MA 73:1976
Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for fixtures, fittings and equipment
SME/32
BS MA 74:-
Tapers and other outboard details of propeller shafts
BS MA 74-2:1981
Specification for shafts of diameter greater than 160 mm up to 1000 mm
SME/32
BS MA 75:-
Specification for bulkhead pieces and tank pads
BS MA 75-1:1985
Bulkhead pieces of fabricated steel or copper alloy and steel pad pieces
SME/32
BS MA 75-2:1978
Bulkhead pieces of ductile iron (spheroidal graphite iron)
SME/32
BS MA 77:1976
Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for services
SME/32
BS MA 78:1978
Specification for aluminium shore gangways
SME/32
BS MA 79:1978
Specification for jib cranes: ship mounted type
SME/32
BS MA 93:1981
Code of practice for structural safety of deck machinery installation
SME/32
BS MA 94:1981
Specification for thermal insulation for marine piping systems
SME/32
BRITISH STANDARDS REVIEWED AND CONFIRMEDBS 61:1969
Specification for threads for light gauge copper tubes and fittings
NFE/34
BS 90:1975
Specification for direct-acting electrical recording instruments and their accessories
PEL/85
Page 14 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 411:1969
Specification for circular saws for woodworking and their attachment
MTE/20
BS 448:-
Dimensions of electronic tubes and valves
BS 448-2:1981
Specification for dimensions of United Kingdom electronic tubes
EPL/39
BS 459:1988
Specification for matchboarded wooden door leaves for external use
B/538
BS 787:-
Specification for mining type flameproof gate-end boxes
BS 787-1:1969
Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)
MRE/3
BS 787-2:1968
Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)
MRE/3
BS 787-3:1971
Gate-end boxes with lighting transformers
MRE/3
BS 787-4:1972
Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)
MRE/3
BS 853:-
Specification for vessels for use in heating systems
BS 853-2:1996
Tubular heat exchangers and storage vessels for building and industrial services
RHE/12
BS 1545:1990Specification for liquid toilet soap
CII/34
BS 1552:1995
Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
GSE/22
BS 1728:-
Methods for the analysis of aluminium and aluminium alloys
BS 1728-1:1951Determination of copper
NFE/35
BS 1728-5:1953
Determination of copper (absorptiometric method)
NFE/35
BS 1728-6:1955
Determination of iron (volumetric: titanous chloride method)
NFE/35
BS 1728-8:1957
Determination of iron (absorptiometric 1:10-phenanthroline method)
NFE/35
BS 1728-9:1957
Determination of manganese (volumetric: arsenite/nitrite method)
NFE/35
BS 1728-10:1957
Determination of manganese (absorptiometric method)
NFE/35
BS 1728-11:1960
Determination of silicon (perchloric acid method)
NFE/35
BS 1728-12:1961
Determination of silicon (absorptiometric molybdenum blue method)
NFE/35
BS 1728-14:1965
Determination of nickel (gravimetric method)
NFE/35
BS 1728-15:1966
Determination of nickel (photometric method)
NFE/35
BS 1728-16:1968
Determination of chromium (photometric method)
NFE/35
BS 1728-17:1968
Determination of chromium (volumetric method)
NFE/35
BS 1728-18:1970
Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)
NFE/35
BS 1728-19:1971
Determination of magnesium (atomic absorption method)
NFE/35
BS 1728-20:1971
Determination of lead (atomic absorption method)
NFE/35
BS 1728-21:1973Zinc (atomic absorption method)
NFE/35
BS 1728-22:1972
Determination of magnesium (volumetric CDTA method)
NFE/35
BS 1728-23:1976
Copper (atomic absorption method)
NFE/35
BS 1728-24:1976Nickel (atomic absorption method)
NFE/35
BS 1911:1990Specification for hard soap
CII/34
BS 1912:1990Specification for soap flakes
CII/34
BS 1913:1990Specification for soft soap
CII/34
BS 1914:1990Specification for toilet soap
CII/34
BS 1919:-Hacksaw blades
Page 15 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 1919-1:1993
Specification for hand and machine hacksaw blades
MTE/20
BS 1919-2:1995
Specification for cutting performance
MTE/20
BS 2011:-Environmental testing
BS 2011-2.2:-Guidance
BS 2011-2.2Kd:1984
Test Kd. Guidance on test Kd: hydrogen sulphide test for contacts and connections
GEL/104
BS 2011-2.2Z/AFc and Z/BFc:1986
Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
GEL/50
BS 2049:1985
Specification for paraffin lighting appliances for domestic use
CW/31
BS 2857:1976
Specification for nickel-iron transformer and choke laminations
EPL/51
BS 3101:1986
Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines
MRE/3
BS 3138:1992
Glossary of terms used in management services
MS/1
BS 3300:1985
Specification for paraffin unflued space heating and cooking appliances for domestic use
CW/31
BS 3338:-
Methods for the sampling and analysis of tin and tin alloys
BS 3338-2:1961
Method for the determination of tin in ingot tin (aluminium reduction method)
NFE/27
BS 3338-3:1961
Method for the determination of antimony in ingot tin (photometric method)
NFE/27
BS 3338-4:1961
Method for the determination of copper in ingot tin and tin-lead solders (photometric method)
NFE/27
BS 3338-5:1961
Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)
NFE/27
BS 3338-6:1961
Method for the determination of copper in high purity ingot tin (photometric method)
NFE/27
BS 3338-7:1961
Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)
NFE/27
BS 3338-8:1961
Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-9:1965
Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-10:1961
Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-11:1961
Method for the determination of tin in solders (nickel coil reduction method)
NFE/27
BS 3338-13:1965
Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
NFE/27
BS 3338-14:1965
Method for the sampling of white metal bearing alloy ingots
NFE/27
BS 3338-15:1965
Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
NFE/27
BS 3338-16:1965
Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
NFE/27
BS 3338-17:1965
Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-18:1966
Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-19:1966
Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
NFE/27
BS 3338-20:1970
Method for the determination of nickel in capping metal (photometric method)
NFE/27
BS 3338-21:1983
Determination of high cadmium content of soft solders
NFE/27
BS 3673:-
Specification for spring retaining rings
Page 16 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 3673-2:1965Carbon steel E clips
FME/18
BS 3673-3:1968Carbon steel C clips
FME/18
BS 3673-4:1977Carbon steel circlips: metric series
FME/18
BS 3693:1992
Recommendations for design of scales and indexes on analogue indicating instruments
PEL/85
BS 3762:-Analysis of formulated detergents
BS 3762-3:-Quantitative test methods
BS 3762-3.12:1985
Method for determination of ammonia content
CII/34
BS 3762-3.14:1985
Method for determination of carbonate content
CII/34
BS 3762-3.15:1985
Method for estimation of carboxymethylcellulose content
CII/34
BS 3762-3.16:1985
Method for determination of chloride content
CII/34
BS 3877:1991
Specification for metal cutting bandsaw blades
MTE/20
BS 3905:1995
Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines
MRE/3
BS 3907:-
Methods for the analysis of magnesium and magnesium alloys
BS 3907-1:1965
Determination of aluminium in magnesium alloys (gravimetric method)
NFE/35
BS 3907-2:1966
Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method)
NFE/35
BS 3907-3:1966
Determination of copper in magnesium and magnesium alloys (photometric method)
NFE/35
BS 3907-4:1966
Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)
NFE/35
BS 3907-5:1966
Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)
NFE/35
BS 3907-6:1969
Determination of zirconium in magnesium and magnesium alloys (photometric method)
NFE/35
BS 3907-7:1969
Determination of nickel in magnesium alloys (photometric method)
NFE/35
BS 3907-8:1970
Determination of total rare earths in magnesium alloys (gravimetric method)
NFE/35
BS 3907-9:1969
Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)
NFE/35
BS 3907-10:1969
Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)
NFE/35
BS 3907-11:1970
Determination of silicon in magnesium and magnesium alloys (photometric method)
NFE/35
BS 3907-12:1971
Determination of aluminium in magnesium and magnesium alloys (photometric method)
NFE/35
BS 3907-13:1972
Determination of tin in magnesium and magnesium alloys (photometric method)
NFE/35
BS 3907-15:1976
Determination of lead in magnesium and magnesium alloys (atomic absorption method)
NFE/35
BS 4023:1975
Specification for flexible cellular PVC sheeting
PRI/71
BS 4078:-Powder actuated fixing systems
BS 4078-1:1987Code of practice for safe use
MTE/21
BS 4078-2:1989Specification for tools
MTE/21
BS 4105:1990
Specification for liquid carbon dioxide, industrial
CII/19
BS 4319:-
Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices)
BS 4319-1:1968
Essential conditions for measuring equivalent input and output admittances
EPL/39
BS 4393:1991
Specification for solderable tin or tin-lead coated wires for component terminations
NFE/27
Page 17 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 4405:1990Specification for liquid soap
CII/34
BS 4411:1969
Specification for woodcutting bandsaw blades
MTE/20
BS 4443:-
Methods of test for flexible cellular materials
BS 4443-4:1989
Method 10. Determination of solvent swelling
PRI/24
BS 4462:1969
Guide for the preparation of technical sales literature for measuring instruments and process control equipment
CPI/704
BS 4478:1969
Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers
EPL/39
BS 4553:-
Specification for 600/1000 V single-phase split concentric electric cables
BS 4553-1:1998Cables having PVC insulation
GEL/20/17
BS 4553-2:1998
Cables having thermosetting insulation
GEL/20/17
BS 4553-3:1998
Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
GEL/20/17
BS 4577:1970
Specification for materials for resistance welding electrodes and ancillary equipment
NFE/34
BS 4727:-
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics
BS 4727-1:-
Terms common to power, telecommunications and electronics
BS 4727-1:Group 01:1983Fundamental terminology
GEL/1
BS 4727-1:Group 07:1991
Magnetic materials and components
GEL/1
BS 4727-1:Group 08:1992
Piezoelectric devices for frequency control and selection
GEL/1
BS 4727-2:-
Terms particular to power engineering
BS 4727-2:Group 08:1994Electric cables
GEL/1
BS 4727-2:Group 13:1991
Electrical apparatus for explosive atmospheres
GEL/1
BS 4727-2:Group 14:1991Power capacitors
GEL/1
BS 4727-2:Group 15:1991Overhead lines
GEL/1
BS 4727-2:Group 16:1991Instrument transformers
GEL/1
BS 4727-3:-
Terms particular to telecommunications and electronics
BS 4727-3:Group 08:1995Acoustics and electroacoustics
GEL/1
BS 4789:1972
Specification for ceramic components for use in envelopes for electronic tubes
EPL/39
BS 5067:1985
Specification for flameproof transformers for use in mines
MRE/3
BS 5125:1990
Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines
MRE/3
BS 5126:-
Mining type flameproof supply and control units for use on systems up to 1100 V
BS 5126-1:1993
Specification for direct-on-line motor starters
MRE/3
BS 5126-2:1993
Specification for circuit breaker units
MRE/3
BS 5126-3:1993
Specification for air-cooled lighting transformer units
MRE/3
BS 5126-4:1993
Specification for air-cooled transformers to power drilling machines
MRE/3
BS 5164:1975
Specification for indirect-acting electrical indicating and recording instruments and their accessories
PEL/85
BS 5226:1991
Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations
AW/17
BS 5305:1984
Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry
AW/17
Page 18 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 5347:1976
Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment
EPL/51
BS 5754:1987
Specification for electrical analogue and state signals for use in coal mines
MRE/3
BS 5923:-
Methods for chemical analysis of rubber
BS 5923-2:1980
EDTA titrimetric method for determination of zinc content of rubber products
PRI/23
BS 6043:-
Methods of sampling and test for carbonaceous materials used in aluminium manufacture
BS 6043-1:-Electrode pitch
BS 6043-1.10:2000
Determination of volatile matter content
CII/24
BS 6043-1.11:2000
Determination of the atomic C/H ratio of the quinoline-insoluble material
CII/24
BS 6043-1.12:1994
Determination of mesophase content
CII/24
BS 6043-1.13:2000Determination of sulfur content
CII/24
BS 6043-2:-Electrode coke
BS 6043-2.4:2000
Analysis by X-ray fluorescence spectroscopy
CII/24
BS 6043-2.9:2000
Determination of particle size distribution
CII/24
BS 6043-2.10:1996
Determination of electrical resistivity of calcined coke granules
CII/24
BS 6043-2.11:1995
Determination of volatile matter content
CII/24
BS 6043-2.12:1994
Determination of particle size distribution of fine coke
CII/24
BS 6043-2.13:1996
Determination of tapped bulk density of green and calcined coke
CII/24
BS 6043-2-18:2001
Determination of the total sulfur by the Eschka method
CII/24
BS 6043-2.20:-Carboxy reactivity of calcined coke
BS 6043-2.20.1:2001
Determination of the reactivity by a loss in mass method
CII/24
BS 6043-2.21:-Air reactivity of calcined coke
BS 6043-2.21.1:2001
Determination of the reactivity by determination of ignition temperature
CII/24
BS 6043-3:-Electrodes
BS 6043-3.1:-Sampling
BS 6043-3.1.1:1999Sampling of cathodes
CII/24
BS 6043-3.1.2:1999Sampling of anodes
CII/24
BS 6043-3.3:2000
Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
CII/24
BS 6043-3.4:2000
Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method
CII/24
BS 6043-3.5:-Determination of flexural strength
BS 6043-3.5.1:2000Three point method
CII/24
BS 6043-3.6:2000
Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
CII/24
BS 6043-3.8:-
Carboxy reactivity of prebaked anodes
BS 6043-3.8.1:2001
Determination of the reactivity by a loss in mass method
CII/24
BS 6043-3.9:-
Chemical reactivity to air of prebaked anodes
BS 6043-3.9.1:2002
Determination of the reactivity by a loss in mass method
CII/24
BS 6043-4:-Cold ramming pastes
BS 6043-4.1:2000Methods of sampling
CII/24
BS 6047:-
Flame supervision devices for domestic, commercial and catering gas appliances
BS 6047-1:1981
Specification for heat sensitive type
GSE/22
Page 19 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 6068:-Water quality
BS 6068-4:-Microbiological methods
BS 6068-4.8:-
Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by enrichment in a liquid mediumSee BS EN 26461-1.
BS 6068-4.13:-
Detection and enumeration of bacteriophages. Enumeration of somatic coliphagesSee BS EN ISO 10705-2.
BS 6068-5:-Biological methods
BS 6068-5.28:2000
Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea)
EH/3/5
BS 6181:1981
Method of test for air permeability of joints in building
B/555
BS 6182:-
Intrinsically safe power supplies for use in coal mines
BS 6182-1:1994
Specification for d.c. power supplies
MRE/3
BS 6182-2:1982
Specification for a.c. power supplies
MRE/3
BS 6271:1982
Specification for miniature hacksaw blades
MTE/20
BS 6346:1997
Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
GEL/20/17
BS 6353:1983
Specification for underground loudspeaker communication systems in coal mines
MRE/3
BS 6360:1991
Specification for conductors in insulated cables and cords
GEL/20/17
BS 6387:1994
Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
GEL/20/18
BS 6469:-
Insulating and sheathing materials of electric cables
BS 6469-99:-
Test methods used in the United Kingdom but not specified in BS EN 60811 or other parts of BS 6469
BS 6469-99.2:1992Electrical tests
GEL/20/17
BS 6485:1999
PVC-covered conductors for overhead power lines
GEL/20/16
BS 6500:2000
Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
GEL/20/17
BS 6556:-
Low speed digital signals for use in coal mines
BS 6556-1:1985Specification for optical coupling
MRE/3
BS 6556-2:1985
Specification for transformer coupling
MRE/3
BS 6556-3:1985
Specification for message protocols
MRE/3
BS 6600:-
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment
BS 6600-1:1987
Specification for the outline dimensions of transformers and inductors using YEI-1 laminations
EPL/51
BS 6600-10:1985
Specification for the outline dimensions of transformers and inductors using the Q range of C-cores
EPL/51
BS 6704:1996
Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
MRE/3
BS 6705:1987
Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
MRE/3
BS 6708:1998
Flexible cables for use at mines and quarries
MRE/3
BS 6709:1986
Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
MRE/3
BS 6724:1997
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire
GEL/20/17
BS 6907:-
Electrical installations for open-cast mines and quarries
BS 6907-1:1988Glossary
MRE/3
BS 6907-2:1988
General recommendations for protection against direct contact and electric shock
MRE/3
Page 20 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 6907-3:1988
Recommendations for equipment and ancillaries
MRE/3
BS 6907-4:1988
Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems
MRE/3
BS 6907-5:1988Recommendations for operation
MRE/3
BS 6910:-
Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.
BS 6910-1:1988Specification for materials
GEL/20/11
BS 6931:1988
Glossary of terms for copper and copper alloys
NFE/34
BS 6940:-
Total access communication system (T.A.C.S)
BS 6940-1:1989
Specification for performance requirements for mobile stations
EPL/102
BS 6940-2:1989
Specification for performance and tests of the signalling system of mobile stations
EPL/102
BS 6954:-Tolerances for building
BS 6954-1:1988
Recommendations for basic principles for evaluation and specification
B/555
BS 6954-2:1988
Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes
B/555
BS 7019:1989
Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
MRE/3
BS 7164:-
Chemical tests for raw and vulcanized rubber
BS 7164-11:-Butadiene rubber
BS 7164-11.2:1993
Method for determination of unsaturation
PRI/23
BS 7194:1990
Specification for direct-current and low-frequency electronic measuring instruments with a digital display
PEL/85
BS 7202:1989
Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines
MRE/3
BS 7211:1998
Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
GEL/20/17
BS 7383:1990
Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines
MRE/3
BS 7461:1991
Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
GSE/22
BS 7527:-
Classification of environmental conditions
BS 7527-2:-
Environmental conditions appearing in nature
BS 7527-2.1:1991Temperature and humidity
GEL/104
BS 7527-2.2:1991Precipitation and wind
GEL/104
BS 7527-2.3:1991Air pressure
GEL/104
BS 7527-2.4:1991Solar radiation and temperature
GEL/104
BS 7527-2.5:1991Dust, sand, salt mist
GEL/104
BS 7527-2.6:1991Earthquake vibration and shock
GEL/104
BS 7527-2.7:1991Fauna and flora
GEL/104
BS 7562:-
Planning, design and installation of irrigation schemes
BS 7562-1:1992Glossary of terms
AGE/30
BS 7562-2:1992Guide for acquisition of site data
AGE/30
BS 7562-4:1992Guide to water resources
AGE/30
BS 7562-5:1993Guide for irrigation equipment
AGE/30
BS 7562-6:1992
Guide for feasibility and implementation procedures
AGE/30
Page 21 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 7592:1992
Methods for sampling for Legionella<I/> organisms in water and related materials
EH/3
BS 7629:-
Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire
BS 7629-1:1997Multicore cables
GEL/20/17
BS 7629-2:1997Multipair cables
GEL/20/17
BS 7655:-
Specification for insulating and sheathing materials for cables
BS 7655-1:-Elastomeric insulating compounds
BS 7655-1.1:2000Harmonized types
GEL/20/17
BS 7655-1.2:1997General 90$0DC application
GEL/20/17
BS 7655-1.3:2000XLPE
GEL/20/17
BS 7655-1.4:2000Oil resisting types
GEL/20/17
BS 7655-1.5:2000Flame retardant composites
GEL/20/17
BS 7655-1.6:2000Coil end lead types
GEL/20/17
BS 7655-2:-Elastomeric sheathing compounds
BS 7655-2.1:2000Harmonized types
GEL/20/17
BS 7655-2.3:2000General application
GEL/20/17
BS 7655-2.4:2000Welding cable covering
GEL/20/17
BS 7655-2.6:2000
Sheathing compounds for ships' wiring and offshore applications
GEL/20/17
BS 7655-3:-PVC insulating compounds
BS 7655-3.1:1997Harmonized types
GEL/20/17
BS 7655-3.2:2000Hard grade types
GEL/20/17
BS 7655-4:-PVC sheathing compounds
BS 7655-4.1:1997Harmonized types
GEL/20/17
BS 7655-4.2:2000General application
GEL/20/17
BS 7655-4.3:2000Special applications. RF cables
GEL/20/17
BS 7655-5:-
Cross-linked insulating compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire
BS 7655-5.1:1997Harmonized cross-linked types
GEL/20/17
BS 7655-6:-
Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire
BS 7655-6.1:1997
General application thermoplastic types
GEL/20/17
BS 7655-8:-
Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire
BS 7655-8.1:2000Harmonized types
GEL/20/17
BS 7655-10:-
Polyethylene sheathing compounds
BS 7655-10.1:2000
Thermoplastic medium density polyethylene (MDPE) sheathing compound
GEL/20/17
BS 7655-11:-
Miscellaneous insulating compounds
BS 7655-11.1:1997
Harmonized cross-linked PVC types
GEL/20/17
BS 7655-12:-
Miscellaneous sheathing compounds
BS 7655-12.1:2000
Harmonized thermoplastic polyurethane sheathing compound
GEL/20/17
BS 7769:-
Electric cables. Calculation of the current rating
BS 7769-1:-
Current rating equations (100% load factor) and calculation of losses
BS 7769-1.1:1997General
GEL/20/16
BS 7769-1.2:1994
Sheath eddy current loss factors for two circuits in flat formation
GEL/20/16
BS 7769-2:-Thermal resistance
Page 22 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 7769-2.2:1997
A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
GEL/20/16
BS 7769-3:-Sections on operating conditions
BS 7769-3.1:1997
Reference operating conditions and selection of cable type
GEL/20/16
BS 7771:1994
Code of practice for pasteurization of milk on farms and in small dairies
AW/17
BS 7846:2000
Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
GEL/20/17
BS 7852:1997
Code of practice for design of canoes and kayaks
GME/33
BS 7870:-
LV and MV polymeric insulated cables for use by distribution and generation utilities
BS 7870-1:1996General
GEL/20/16
BS 7870-2:1999Methods of test
GEL/20/16
BS 7870-4:-
Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV
BS 7870-4.10:1999Single-core 11 kV and 33 kV cables
GEL/20/16
BS 7870-4.11:1999
Single-core 33 kV lead sheathed cables
GEL/20/16
BS 7870-4.20:1999Three-core 11 kV cables
GEL/20/16
BS 7870-5:1999
Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
GEL/20/16
BS 7870-6:-
Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
BS 7870-6.1:1999
PVC insulated and PVC sheathed cables
GEL/20/16
BS 7870-6.2:1999
XLPE or HEPR insulated and PVC sheathed cables
GEL/20/16
BS 7870-6.3:1999
Cables with thermosetting insulation and non-halogenated sheath
GEL/20/16
BS 7874:1998
Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
PRI/70
BS 7889:1997
Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
GEL/20/17
BS 7924:1999
Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp
MRE/3
BS 9721:1985
Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
EPL/51
BS 9727:1985
Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval
EPL/51
BS 9733:1985
Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
EPL/51
BS 9741:1986
Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
EPL/51
BS 9751:1979
Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level
EPL/51
BS 9753:1986
Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval
EPL/51
BS EN ISO 683:-
Heat-treated steels, alloy steels and free-cutting steels
BS EN ISO 683-17:1999Ball and roller bearing steels
ISE/31
BS EN 1622:1998
Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN)
EPL/47
BS EN 1976:1998
Copper and copper alloys. Cast unwrought copper products
GEL/20/17
BS EN 1977:1998
Copper and copper alloys. Copper drawing stock (wire rod)
GEL/20/17
Page 23 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 1978:1998
Copper and copper alloys. Copper cathodes
GEL/20/17
BS EN ISO 4957:2000Tool steels
ISE/31
BS EN ISO 6509:1995
Corrosion of metals and alloys. Determination of dezincification resistance of brass
ISE/NFE/8
BS EN ISO 7384:1995
Corrosion tests in artificial atmospheres. General requirements
ISE/NFE/8
BS EN ISO 7441:1995
Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests
ISE/NFE/8
BS EN ISO 7539:-
Corrosion of metals and alloys. Stress corrosion testing
BS EN ISO 7539-1:1995
General guidance on testing procedures
ISE/NFE/8
BS EN ISO 7539-2:1995
Preparation and use of bent-beam specimens
ISE/NFE/8
BS EN ISO 7539-3:1995
Preparation and use of U-bend specimens
ISE/NFE/8
BS EN ISO 7539-4:1995
Preparation and use of uniaxially loaded tension specimens
ISE/NFE/8
BS EN ISO 7539-5:1995
Method for the preparation and use of C-ring specimens
ISE/NFE/8
BS EN ISO 7899:-
Water quality. Detection and enumeration of intestinal enterococci in surface and waste water
BS EN ISO 7899-1:1999
Miniaturized method (Most probable number) for surface and waste water
EH/3/4
BS EN ISO 7899-2:2000Membrane filtration method
EH/3/4
BS EN ISO 8044:2000
Corrosion of metals and alloys. Basic terms and definitions
ISE/NFE/8
BS EN ISO 8565:1995
Metals and alloys. Atmospheric corrosion testing. General requirements for field tests
ISE/NFE/8
BS EN ISO 9308:-
Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water
BS EN ISO 9308-1:2000Membrane filtration method
EH/3/4
BS EN ISO 9308-3:1999
Miniaturized method (most probable number) for the detection and enumeration of E. coli in surface and waste water
EH/3/4
BS EN ISO 9400:1996
Nickel-based alloys. Determination of resistance to intergranular corrosion
ISE/NFE/8
BS EN 10048:1997
Hot rolled narrow steel strip. Tolerances on dimensions and shape
ISE/10
BS EN ISO 10062:1995
Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)
ISE/NFE/8
BS EN 10083:-Quenched and tempered steels
BS EN 10083-1:1991
Technical delivery conditions for special steels
ISE/31
BS EN 10083-2:1991
Technical delivery conditions for unalloyed quality steels
ISE/31
BS EN 10083-3:1996
Technical delivery conditions for boron steels
ISE/31
BS EN 10084:1998
Case hardening steels. Technical delivery conditions
ISE/31
BS EN 10087:1999
Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
ISE/31
BS EN 10089:2002
Hot rolled steels for quenched and tempered springs. Technical delivery conditions
ISE/31
BS EN 10132:-
Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
BS EN 10132-1:2000General
ISE/31
BS EN 10132-2:2000Case hardening steels
ISE/31
BS EN 10132-3:2000
Steels for quenching and tempering
ISE/31
BS EN 10132-4:2000
Spring steels and other applications
ISE/31
BS EN 10139:1998
Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions
ISE/10
BS EN 10149:-
Specification for hot-rolled flat products made of high yield strength steels for cold forming
Page 24 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 10149-1:1996General delivery conditions
ISE/10
BS EN 10149-2:1996
Delivery conditions for thermomechanically rolled steels
ISE/10
BS EN 10149-3:1996
Delivery conditions for normalized or normalized rolled steels
ISE/10
BS EN 10209:1996
Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
ISE/10
BS EN 10221:1996
Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
ISE/31
BS EN 10243:-
Steel die forgings. Tolerances on dimensions
BS EN 10243-1:1999Drop and vertical press forgings
ISE/31
BS EN 10243-2:1999
Upset forgings made on horizontal forging machines
ISE/31
BS EN 10250:-
Open steel die forgings for general engineering purposes
BS EN 10250-1:1999General requirements
ISE/31
BS EN 10250-2:2000Non-alloy quality and special steels
ISE/31
BS EN 10250-3:2000Alloy special steels
ISE/31
BS EN 10250-4:2000Stainless steels
ISE/31
BS EN 10254:1999
Steel closed die forgings. General technical delivery conditions
ISE/31
BS EN 10267:1998
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
ISE/31
BS EN 10277:-
Bright steel products. Technical delivery conditions
BS EN 10277-1:1999General
ISE/31
BS EN 10277-2:1999
Steels for general engineering purposes
ISE/31
BS EN 10277-3:1999Free cutting steels
ISE/31
BS EN 10277-4:1999Case-hardening steels
ISE/31
BS EN 10277-5:1999
Steels for quenching and tempering
ISE/31
BS EN 10278:1999
Dimensions and tolerances of bright steel products
ISE/31
BS EN 10292:2000
Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions
ISE/10
BS EN ISO 10705:-
Water quality. Detection and enumeration of bacteriophages
BS EN ISO 10705-2:2001(BS 6068-4.13:2000)Enumeration of somatic coliphages
EH/3/4
BS EN ISO 11130:1999
Corrosion of metals and alloys. Alternate immersion test in salt solution
ISE/NFE/8
BS EN ISO 11306:1998
Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
ISE/NFE/8
BS EN 12094:-
Fixed firefighting systems. Components for gas extinguishing systems
BS EN 12094-8:1998
Requirements and test methods for flexible connectors for CO$d2 systems
GEL/104
BS EN 12500:2000
Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments
ISE/NFE/8
BS EN 24506:1993
Specification for hardmetals. Compression test
ISE/65
BS EN 26461:-
Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia)
BS EN 26461-1:1993(BS 6068-4.8:1993)
Method by enrichment in a liquid medium
EH/3
BS EN 50109:-
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications
BS EN 50109-1:1996General requirements and tests
EPL/46/2
BS EN 50109-2:-Particular requirements
Page 25 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 50109-2-1:1996
Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and W
EPL/46/2
BS EN 50109-2-2:1996
Radio frequency connectors and concentric contacts. Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W
EPL/46/2
BS EN 50109-2-3:1996Contacts of electrical connectors
EPL/46/2
BS EN 50109-2-4:1996
Centre contacts of RF connectors, series SMZ
EPL/46/2
BS EN 50109-2-5:1996
Termination of twin-ax cable for databus applications
EPL/46/2
BS EN 50117:-
Coaxial cables used in cabled distribution networks
BS EN 50117-3:1996
Sectional specification for outdoor drop cables
EPL/46/1
BS EN 50117-4:1996
Sectional specification for distribution and trunk cables
EPL/46/1
BS EN 50117-5:1997
Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EPL/46/1
BS EN 50117-6:1997
Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EPL/46/1
BS EN 50262:1999
Cable glands for electrical installations
GEL/20/11/1
BS EN 60068:-Environmental testing
BS EN 60068-1:1995General and guidance
GEL/104
BS EN 60068-2:-Test methods
BS EN 60068-2-1:1993Tests A. Cold
GEL/104
BS EN 60068-2-2:1993Tests B. Dry heat
GEL/104
BS EN 60068-2-6:1996Test Fc. Vibration (sinusoidal)
GEL/104
BS EN 60068-2-7:1993
Test Ga and guidance. Acceleration, steady state
GEL/104
BS EN 60068-2-11:1999Test KA. Salt mist
GEL/104
BS EN 60068-2-13:1999Test M. Low air pressure
GEL/104
BS EN 60068-2-14:2000Test N. Change of temperature
GEL/104
BS EN 60068-2-17:1995Test Q. Sealing
GEL/104
BS EN 60068-2-18:2001Tests R and guidance. Water
GEL/104
BS EN 60068-2-27:1993Test Ea and guidance. Shock
GEL/104
BS EN 60068-2-29:1993Test Eb and guidance. Bump
GEL/104
BS EN 60068-2-30:1999
Test Db and guidance. Damp heat, cyclic (12 + 12 hour cycle)
GEL/104
BS EN 60068-2-31:1993
Test Ec. Drop and topple, primarily for equipment-type specimens
GEL/104
BS EN 60068-2-32:1993Test Ed. Free fall
GEL/104
BS EN 60068-2-33:2000
Guidance on change of temperature tests
GEL/104
BS EN 60068-2-38:1999
Test Z/AD. Composite temperature/humidity cyclic test
GEL/104
BS EN 60068-2-39:1999
Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
GEL/104
BS EN 60068-2-40:2000
Test Z/AM. Combined cold/low air pressure tests
GEL/104
BS EN 60068-2-41:2000
Test Z/BM. Combined dry heat/low air pressure tests
GEL/104
BS EN 60068-2-44:1995Guidance on test T. Soldering
GEL/104
BS EN 60068-2-45:1993
Test XA and guidance. Immersion in cleaning solvents
GEL/104
BS EN 60068-2-47:2000
Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
GEL/104
BS EN 60068-2-48:2000
Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
GEL/104
BS EN 60068-2-52:1996
Test Kb. Salt mist cyclic (sodium chloride solution)
GEL/104
Page 26 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 60068-2-55:1993Test Ee and guidance. Bounce
GEL/104
BS EN 60068-2-60:1996
Test Ke. Flowing mixed gas corrosion test
GEL/104
BS EN 60068-2-61:1994Test Z/ABDM. Climatic sequence
GEL/104
BS EN 60068-2-65:1995
Test Fg. Vibration, acoustically induced
GEL/104
BS EN 60068-2-66:1995
Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
GEL/104
BS EN 60068-2-67:1996
Test Cy. Damp heat, steady state, accelerated test primarily intended for components
GEL/104
BS EN 60068-2-69:1996
Test Te. Solderability testing of electronic components for surface mount technology by the wetting balance method
GEL/104
BS EN 60068-2-70:1996
Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands
GEL/104
BS EN 60068-2-75:1997Test Eh. Hammer tests
GEL/104
BS EN 60068-3:-Guidance
BS EN 60068-3-3:1993
Environmental testing. Miscellaneous. Guide to seismic test methods for equipment
GEL/104
BS EN 60154:-Flanges for waveguides
BS EN 60154-1:1996General requirements
EPL/46/2
BS EN 60154-2:1997
Relevant specifications for flanges for ordinary rectangular waveguides
EPL/46/2
BS EN 60169:-Radio-frequency connectors
BS EN 60169-23:1994
Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0 ,1378 in)
EPL/46/2
BS EN 60169-24:1994
Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
EPL/46/2
BS EN 60169-25:1994
Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)
EPL/46/2
BS EN 60719:1993
Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
GEL/20/17
BS EN 60811:-
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds
BS EN 60811-3:-
Pressure test at high temperature. Tests for resistance to cracking
BS EN 60811-3-1:1995
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds
GEL/20/17
BS EN 60811-3-2:1995
Insulating and sheathing materials of electric cables. Common test methods
GEL/20/17
BS EN 60966:-
Radio frequency and coaxial cable assemblies
BS EN 60966-1:1999
Generic specification. General requirements and test methods
EPL/46/1
BS EN 61169:-Radio-frequency connectors
BS EN 61169-1:1996
Generic specification. General requirements and measuring methods
EPL/46/2
BS EN 61169-31:2000
RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0)
EPL/46/2
BS EN 61169-32:2000
RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85)
EPL/46/2
BS EN 61580:-
Methods of measurement for waveguides
BS EN 61580-1:1997
Decoupling and rotation of the plane of polarization
EPL/46/2
BS EN 61580-2:1997Level of intermodulation products
EPL/46/2
BS EN 61580-7:1997
Graphical method for the determination of waveguide performance
EPL/46/2
BS EN 61580-8:1997
Waveguide power holding capability
EPL/46/2
BS EN 61580-9:1997
Reflection coefficient at rectangular waveguide interfaces
EPL/46/2
Page 27 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 61726:2000
Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method
EPL/46
BS EN 62037:2000
RF connectors, connector cable assemblies and cables. Intermodulation level measurement
EPL/46
BS EN 122150:1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange
EPL/46
BS EN 122160:1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMA
EPL/46
BS EN 122180:1996
Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC
EPL/46/2
BS EN 122190:1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16
EPL/46
BS EN 122340:2002
Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX
EPL/46/2
DD ENV 302:-
Adhesives for load-bearing timber structures. Test methods
DD ENV 302-5:2002
Determination of the conventional assembly time
PRI/52
DD ENV 13999:-
Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
DD ENV 13999-2:2002
Determination of volatile organic compounds
PRI/52
DD ENV 13999-3:2002Determination of volatile aldehydes
PRI/52
DD ENV 13999-4:2002
Determination of volatile diisocyanates
PRI/52
BS ISO 3534:-Statistics. Vocabulary and symbols
BS ISO 3534-3:1999Design of experiments
SS/1
BS ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
ISE/65
BS ISO/IEC 6523:-
Information technology. Structure for the identification of organizations and organization parts
BS ISO/IEC 6523-1:1998
Identification of organization identification schemes
IST/40
BS ISO/IEC 6523-2:1998
Registration of organization identification schemes
IST/40
BS ISO 7539:-
Corrosion of metals and alloys. Stress corrosion testing
BS ISO 7539-8:2000
Preparation and use of specimens to evaluate weldments
ISE/NFE/8
BS ISO 9403:2000
Crude petroleum. Transfer accountability. Guidelines for cargo inspection
PTI/12
BS ISO 10270:1995
Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISE/NFE/8
BS ISO 10405:2000
Petroleum and natural gas industries. Care and use of casing and tubing
PSE/17
BS ISO 11463:1995
Corrosion of metals and alloys. Evaluation of pitting corrosion
ISE/NFE/8
BS ISO 11782:-
Corrosion of metal and alloys. Corrosion fatigue testing
BS ISO 11782-1:1998Cycles to failure testing
ISE/NFE/8
BS ISO 11782-2:1998
Crack propagation testing using precracked specimens
ISE/NFE/8
BS ISO 11846:1995
Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISE/NFE/8
BS ISO/IEC 13238:-
Information technology. Data management
BS ISO/IEC 13238-3:1998IRDS export/import facility
IST/40
BS ISO 14976:1998
Surface chemical analysis. Data transfer format
CII/60
Page 28 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS ISO 15324:2000
Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
ISE/NFE/8
BS IEC 60050:-
International electrotechnical vocabulary
BS IEC 60050-101:1998Mathematics
GEL/1
BS IEC 60050-121:1998Electromagnetism
GEL/1
BS IEC 60050-195:1998
Earthing and protection against electric shock
GEL/1
BS IEC 60050-351:1998Automatic control
GEL/1
BS IEC 60050-411:1996Rotating machines
GEL/1
BS IEC 60050-442:1998Electrical accessories
GEL/1
BS IEC 60050-551:1998Power electronics
GEL/1
BS IEC 60050-651:1999Live working
GEL/1
BS IEC 60050-705:1995Radio wave propagation
GEL/1
BS IEC 60050-715:1996
Telecommunication networks, teletraffic and operation
GEL/1
BS IEC 60050-821:1998
Signalling and security apparatus for railways
GEL/1
DD IEC/PAS 62338:2002
Screened balanced cables. Coupling attenuation measurement, triaxial method
EPL/46/1
PD 6484:1979
Commentary on corrosion at bimetallic contacts and its alleviation
ISE/NFE/8
PD 6634:-Vehicle restraint systems
PD 6634-1:1999Fundamentals. Database
B/509/1
PD 6634-2:1999
Fundamentals of highway restraint systems
B/509/1
PD 6634-3:1999
Development of vehicle highway barriers in the United Kingdom
B/509/1
PD 6634-4:1999
Development of bridge parapets in the United Kingdom
B/509/1
PD 6634-5:1999
Development of barrier transitions and terminals
B/509/1
PD 6634-6:1999
Crashworthy roadside features. Impact attenuators
B/509/1
BS G 257:-
Design of electromagnetic hazard protection of civil aircraft
BS G 257-1:1998Guide to theory and threats
ACE/66
BS G 257-2:1998Guide to protection
ACE/66
BS 2M 47:1990
Specification for retreading of cross ply tyres for aircraft
ACE/59
BS QC 221100:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (type SMA)
EPL/46/2
BS QC 221200:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
EPL/46/2
BS QC 221300:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (type SMB)
EPL/46/2
BS QC 221400:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (type SMC)
EPL/46/2
BS QC 222000:1996
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms (type TNC)
EPL/46/2
BS QC 222100:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)
EPL/46/2
Page 29 of 69BRITISH STANDARDS REVIEWED AND CONFIRMED
BS QC 222400:1997
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions
EPL/46/2
BS AU 2a:1970
Specification for dimensions of 3$9H - 4$9H in diameter fifth wheel king pin for use with extra heavy duty semi-trailers
AUE/13
BS AU 3:1970
Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers
AUE/13
BS AU 25:1964
Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle
AUE/13
BS AU 26:1964
Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle
AUE/13
BS AU 27:1964
Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle
AUE/13
BS AU 28:1964
Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle
AUE/13
BS AU 29:1964
Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle
AUE/13
BS AU 30b:1970
Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14$9L tons laden weight
AUE/13
BS AU 146b:1970
Specification for standard automatic roller-type coupling for semi-trailers not exceeding 7$9D tons laden weight
AUE/13
BS AU 181:1982
Specification for interface dimensions for demountable vehicle body systems
AUE/13
BS AU 200:-
Spray reducing devices for heavy goods vehicles
BS AU 200-1a:1984
Specification for design of containment devices
AUE/13
BS AU 200-2a:1984
Specification for performance of suppression material and devices, and air/water separating material and devices
AUE/13
BS AU 217:-
Maximum road speed limiters for motor vehicles
BS AU 217-1a:1987
Specification for installed requirements
AUE/13
BS AU 217-2:1989
Specification for system and component requirements
AUE/13
BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCEBS 2050:1978
Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material
PRI/22/-/5This standard has been proposed for obsolescence as it is not widely used.
BS 7669:-Vehicle restraint systems
BS 7669-3:1994
Guide to the installation, inspection and repair of safety fences
B/509This standard has been proposed for obsolescence as it is rarely used.
BS 7818:1995
Specification for pedestrian restraint systems in metal
B/509/1This standard has been proposed for obsolescence as it is rarely used.
BS 9450:1975
Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test
EPL/47This standard has been proposed for confirmation of obsolescence for a further period.
BRITISH STANDARDS DECLARED OBSOLESCENTBS 4370:-
Methods of test for rigid cellular materials
BS 4370-1:1988Methods 1 to 5
PRI/24This standard has been declared obsolescent as the methods it contains are no longer being used by UK industry.
BS 4570:1985
Specification for fusion welding of steel castings
WEE/-/1This standard has been declared obsolescent since although it is still used by some areas of UK industry, there is insufficient support for the preparation of an up-to-date revision.
BS 4579:-
Specification for performance of mechanical and compression joints in electric cable and wire connectors
Page 30 of 69BRITISH STANDARDS DECLARED OBSOLESCENT
BS 4579-2:1973
Compression joints in nickel, iron and plated copper conductors
GEL/20/11This standard has been declared obsolescent as the committee believe it is no longer widely used for new designs. It should therefore be retained only for existing equipment, and will no longer require maintenance.
BS ISO/IEC 9579:2000
Information technology. Remote database access for SQL with security enhancement
IST/40This standard has been declared obsolescent since the international version is not being maintained by ISO/IEC and there is no evidence of its continued use in the UK.
BS ISO/IEC ISP 12073:2000
Information technology. International standardized profile FD16 directory data definitions. EDI use of the directory
IST/40This standard has been declared obsolescent since the international version is not being maintained by ISO/IEC and there is no evidence of its continued use in the UK.
BRITISH STANDARDS PROPOSED FOR WITHDRAWALBS 2011:-Environmental testing
BS 2011-5:-Guide to drafting of test methods
BS 2011-5.1:1991General principles
GEL/104This standard has been proposed for withdrawal because it is no longer in general use
BS 3648:1963Specification for cycle rear lamps
GME/25This standard, which was superseded by BS 6102-3:1986 but has remained current owing to its citation in legislation, has been proposed for full withdrawal as it is no longer used by UK industry
BS 6579:-
Safety fences and barriers for highways
BS 6579-1:1988
Specification for components for tensioned corrugated beam safety fence on Z posts
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-3:1988
Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-4:1990
Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-5:1986
Specification for open box beam safety fence (single height)
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-6:1988
Specification for components for open box beam safety fence (double height)
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-7:1989
Specification for components for untensioned corrugated beam safety fence
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 6579-8:1987
Specification for concrete safety barriers
B/509This standard has been proposed for withdrawal as it is no longer used in the UK
BS 7368:1990
Specification for babies' elastomeric feeding bottle teats
CW/42This standard has been proposed for withdrawal in line with the publication of superseding documents BS EN 14350:2004 Parts 1 & 2
BS 7480:1992Specification for security seals
GW/2This standard has been proposed for withdrawal as it is no longer relevant. It will be superseded by an ISO standard, which is currently available as a Draft for Development, DD ISO/PAS 17712:2003
BS 7606:1992
Specification for social alarm system apparatus for connection to public switched telephone networks
GW/1This standard has been proposed for withdrawal as it is no longer used in the UK
DD IEC PAS 62255:-
Multi-pair cables used in high bit rate digital access telecommunication networks
DD IEC PAS 62255-1:2001Outdoor cables
EPL/46/1This standard has been proposed for withdrawal as it has been superseded by IEC 62255-1:2003, which has not been adopted by BSI as it conflicts with current European standards
PD 6522:1988
Terms relevant to the feather industry for fillings for bedding, upholstery and other domestic articles
TCI/66This standard has been proposed for full withdrawal owing to its complete supersession by BS EN 1885:1998
Page 31 of 69BRITISH STANDARDS PROPOSED FOR WITHDRAWAL
BRITISH STANDARDS WITHDRAWNBS 1608:1990
Specification for electrically driven refrigerant condensing units
RHE/4This standard has been withdrawn as it is no longer current with respect to modern methods and consequently condensing unit manufacturers no longer refer to it
BS 3970:-
Sterilizing and disinfecting equipment for medical products
BS 3970-4:1990
Specification for transportable steam sterilizers for unwrapped instruments and utensils
LBI/35Superseded by BS EN 13060:2004
BS 4533:-Luminaires
BS 4533-102:-Particular requirements
BS 4533-102.22:1990
Specification for luminaires for emergency lighting
CPL/34Superseded by BS EN 60598-2-22:1999
BS 4897:-Trace metal contents of pulps
BS 4897-4:1983
Method for determination of manganese content by sodium periodate photometric and flame atomic absorption spectrometric methods
PAI/11Superseded by BS ISO 1830:2005
BS 5224:1995Specification for masonry cement
B/516/10Superseded by BS EN 413-1:2004
BS 5473:1977
Specification for spinal and abdominal fabric supports
CH/168Superseded by BS 8432:2005
BS 5766:-
Methods for analysis of animal feeding stuffs
BS 5766-4:1998
Determination of nitrogen content and calculation of crude protein content
AW/10Superseded by BS EN ISO 5983-1:2005
BS 6323:-
Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes
BS 6323-6:1982
Specific requirements for cold finished electric resistance welded (including induction welded) steel tubes
ISE/8Superseded by BS EN 10305 Parts 2, 3 & 6
BS 6955:-
Calibration of vibration and shock pick-ups
BS 6955-4:1994
Method for secondary shock calibration
GME/21Superseded by BS ISO 16063-22:2005
BS 7164:-
Chemical tests for raw and vulcanized rubber
BS 7164-6:-
Methods for determination of volatile matter
BS 7164-6.1:1994Raw rubber
PRI/23Superseded by BS ISO 248:2005
BS 7426:-
Specification for high-voltage alternating current switch-fuse combinationsSee BS EN 60420
BS 7866:1996
Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
PEL/36Superseded by BS EN 50386:2002
BS 7877:1999
Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers
PEL/36/1Superseded by BS EN 50387:2002
BS EN 12625:-Tissue paper and tissue products
BS EN 12625-3:1999
Determination of thickness, bulking thickness and apparent bulk density
PAI/10Superseded by BS EN ISO 12625-3:2005
BS EN 12625-4:1999
Determination of tensile strength, stretch at break and tensile energy absorption
PAI/10Superseded by BS EN ISO 12625-4:2005
BS EN 22063:1994
Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
STI/40Superseded by BS EN ISO 2063:2005
BS EN 50091:-
Specification for uninterruptible power systems (UPS)
BS EN 50091-1-1:1997
General and safety requirements for UPS used in operator access areas
PEL/22Superseded by BS EN 62040-1-1:2003
BS EN 50091-1-2:1999
General and safety requirements for UPS used in restricted access locations
PEL/22Superseded by BS EN 62040-1-2:2003
BS EN 60335:-
Specification for safety of household and similar electrical appliances
BS EN 60335-2:-Particular requirements
Page 32 of 69BRITISH STANDARDS WITHDRAWN
BS EN 60335-2-3:1995Electric irons
CPL/61/30Superseded by BS EN 60335-2-3:2002
BS EN 60335-2-4:1995Spin extractors
CPL/61Superseded by BS EN 60335-2-4:2002
BS EN 60335-2-25:1997Microwave ovens
CPL/61/2Superseded by BS EN 60335-2-25:2002
BS EN 60335-2-70:1996Milking machines
CPL/61Superseded by BS EN 60335-2-70:2002
BS EN 60335-2-87:1999
Electric animal-stunning equipment
CPL/61, CPL/61/8Superseded by BS EN 60335-2-87:2002
BS EN 60335-2-90:1998Commercial microwave ovens
CPL/61, CPL/61/2Superseded by BS EN 60335-2-90:2002
BS EN 60420:1993(BS 7426:1991)
Specification for high-voltage alternating current switch-fuse combinations
PEL/17/1Superseded by BS EN 62271-105:2003
BS EN 61000:-
Electromagnetic compatibility (EMC)
BS EN 61000-4-7:1993
General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
GEL/210/8Superseded by BS EN 61000-4-7:2002
BS ISO/IEC 10728:1993
Information technology. Information resource dictionary system (IRDS) services interface
IST/40This standard has been withdrawn since it has been superseded by ISO/IEC 10728:1993 which is approved with any amendments for use in the UK
BS ISO/IEC 11179:-
Information technology. Specification and standardization of data elements
BS ISO/IEC 11179-3:1994Basic attributes of data elements
IST/40This standard has been withdrawn in line with the withdrawal of the international standard on which it was based
BS IEC 50:-
International electrotechnical vocabulary
BS IEC 50(481):1996Primary cells and batteries
GEL/1This standard has been withdrawn as it has been superseded by IEC 60050-482, which has not been adopted by BSI as it is more readily available via the IEC on-line database
BS AU 50:-Tyres and wheels
BS AU 50-1:-Tyres
BS AU 50-1.4:-
Agricultural tractor and machine tyres
BS AU 50-1.4.5a:1996
Specification for designations, dimensions, marking and tyre/rim coordination for metric series tyres
AUE/4Superseded by BS ISO 7867-1:2005
NEW WORK STARTED
BS 4163 (Revision)
Health and safety for design and technology in schools and similar establishments code of practicewill supersede BS 4163:2000
GME/27
BS 5839:-
Fire detection and alarm systems for buildings
BS 5839-8 (Revision)
Code of practice for the design, installation, commissioning and servicing of voice alarm systemswill supersede BS 5839-8:1998
FSH/12/1
BS 5892:-Railway rolling stock materials
BS 5892-1 (Revision)
Specification for axles for traction and trailing stockwill supersede BS 5892-1:1992
RAE/3/-/1
BS 5892-5:1997/Amendment 1
Specification for steel bars for retaining rings for tired wheels
RAE/3/-/1
BS 5950:-
Structural use of steelwork in building
BS 5950-1:2000/Amendment 1
Code of practice for design. Rolled and welded sections
B/525/31
BS 6297 (Revision)
Design and installation of small sewage treatment works and cesspools code of practicewill supersede BS 6297:1983
B/505/40
BS 6739 (Revision)
Code of practice for instrumentation in process control systems. Installation design and practicewill supersede BS 6739:1986
GEL/65
BS 6782:-Binders for paints
BS 6782-10:1998/Amendment 1
Determination of monomeric and varnishes diisocyanates in polyisocyanate resins
STI/3
BS 7273:-
Code of practice for the operation of fire protection measures
Page 33 of 69NEW WORK STARTED
BS 7273-1 (Revision)
Electrical actuation of gaseous total flooding extinguishing systemswill supersede BS 7273-1:2000
FSH/12/4
BS 7533:-
Pavements constructed with clay, natural stone, or concrete pavers
BS 7533-7:2002/Amendment 1
Code of practice for the construction of pavements of natural stone setts and cobbles, and rigid construction with concrete block paving
B/507
BS 7533-10:2004/Amendment 1
Guide for the structural design of trafficked pavements constructed of natural stone setts
B/507
BS 7941:-
Methods for measuring the skid resistance of pavement surfaces
BS 7941-1 (Revision)
Side-way force coefficient routine investigation machinewill supersede BS 7941-1:1999
B/510/5
BS 8476
Code of practice for the safe use of concrete pumps
B/513/8
BS 8477
Customer satisfaction customer service guidelines
SVS/8
BS 11000:-Relationship management
BS 11000-1General
SVS/8
BS XXXXSpecification for diving gases
PH/4/7BS XXXX
Code of practice for airtight ceilings and the control of air movements in roofs with airtight ceilings
B/542/1
BS XXXX
A code of practice for the design of limited access stairs
B/208
BS EN 33 (Revision)
Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensionswill supersede BS EN 33:2003
B/503
BS EN 40:-Lighting columns
BS EN 40-1:1992/Amendment 1Definitions and terms
B/509/50
BS EN 287:-
Qualification test of welders. Fusion welding
BS EN 287-1:2004/Amendment 2Steels
WEE/36
BS EN 343:2003/Amendment 1
Protective clothing. Garments for protection against rain
PH/3
BS EN 415:-Safety of packaging machines
BS EN 415-9
Noise measurement methods for packaging machines, packaging lines and auxiliary equipment. Grade 2 and 3 accuracy
MCE/3/3
BS EN 754:-
Aluminium and aluminium alloys. Cold drawn rod/bar and tube
BS EN 754-1 (Revision)
Technical conditions for inspection and deliverywill supersede BS EN 754-1:1997
NFE/35
BS EN 754-2 (Revision)Mechanical properties
will supersede BS EN 754-2:1997NFE/35
BS EN 754-3 (Revision)
Round bars, tolerances on dimensions and formwill supersede BS EN 754-3:1996
NFE/35
BS EN 754-4 (Revision)
Square bars, tolerances on dimensions and formwill supersede BS EN 754-4:1996
NFE/35
BS EN 754-5 (Revision)
Rectangular bars, tolerances on dimensions and formwill supersede BS EN 754-5:1996
NFE/35
BS EN 754-6 (Revision)
Hexagonal bars, tolerances on dimensions and formwill supersede BS EN 754-6:1996
NFE/35
BS EN 754-7 (Revision)
Seamless tubes, tolerances on dimensions and formwill supersede BS EN 754-7:1998
NFE/35
BS EN 754-8 (Revision)
Porthole tubes, tolerances on dimensions and formwill supersede BS EN 754-8:1998
NFE/35
BS EN 755:-
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN 755-1 (Revision)
Technical conditions for inspection and deliverywill supersede BS EN 755-1:1997
NFE/35
BS EN 755-2 (Revision)Mechanical properties
will supersede BS EN 755-2:1997NFE/35
BS EN 755-3 (Revision)
Round bars, tolerances on dimensions and formswill supersede BS EN 755-3:1996
NFE/35
BS EN 755-4 (Revision)
Square bars, tolerances on dimensions and formwill supersede BS EN 755-4:1996
NFE/35
BS EN 755-5 (Revision)
Rectangular bars, tolerances on dimensions and formwill supersede BS EN 755-5:1996
NFE/35
Page 34 of 69NEW WORK STARTED
BS EN 755-6 (Revision)
Hexagonal bars, tolerances on dimensions and formwill supersede BS EN 755-6:1996
NFE/35
BS EN 755-7 (Revision)
Seamless tubes, tolerances on dimensions and formwill supersede BS EN 755-7:1998
NFE/35
BS EN 755-8 (Revision)
Porthole tubes, tolerances on dimensions and formwill supersede BS EN 755-8:1998
NFE/35
BS EN 755-9 (Revision)
Tolerances on dimensions and formwill supersede BS EN 755-9:2001
NFE/35
BS EN 846:-
Methods of test for ancillary components for masonry
BS EN 846-8 (Revision)
Determination of load capacity and load-deflection characteristics of joist hangerswill supersede BS EN 846-8:2000
B/519
BS EN 943:-
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles
BS EN 943-1:2002/Amendment C
Performance requirements for ventilated and non-ventilated 'gas-tight' (type 1) and 'non-gas-tight' (type 2) chemical protective suits
PH/3/8
BS EN ISO/CD 945:-
Designation of microstructure of cast irons
BS EN ISO/CD 945-1
Graphite classification by visual analysis
ISE/35
BS EN 970 (Revision)
Non-destructive examination of fusion welds. Visual examinationwill supersede BS EN 970:1997
WEE/46
BS EN 1071:-
Advanced technical ceramics. Methods of test for ceramic coatings
BS EN 1071-6 (Revision)
Determination of the abrasion resistance of coatings by a micro-abrasion wear testwill supersede DD ENV 1071-6:2002
RPI/13
BS EN 1459:1999/Amendment 1
Safety of industrial trucks. Self-propelled variable reach trucks
MHE/7
BS EN 1634:-
Fire resistance tests for door and shutter assemblies
BS EN 1634-1:2000/Amendment 1Fire doors and shutters
FSH/22
BS EN 1712 (Revision)
Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levelswill supersede BS EN 1712:1997
WEE/46
BS EN 1714 (Revision)
Non-destructive examination of welds. Ultrasonic examination of welded jointswill supersede BS EN 1714:1998
WEE/46
BS EN 1745 (Revision)
Masonry and masonry products. methods for determining design thermal valueswill supersede BS EN 1745:2002
B/519
BS EN ISO 3673:-Plastics. Epoxy resins
BS EN ISO 3673-2 (Revision)
Preparation of test specimens and determination of propertieswill supersede BS EN ISO 3673-2:2000
PRI/42
BS EN ISO 5850:-Pulp. Estimation of dirt and shives
BS EN ISO 5850-1
Inspection of laboratory sheets by transmitted light
PAI/11
BS EN ISO 6141
Gas analysis. Requirements for certificates for calibration gases and gas mixtureswill supersede BS 4559-4:2000
PTI/15
BS EN ISO 6143
Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtureswill supersede BS ISO 6143:2001
PTI/15
BS EN ISO 6144
Gas analysis. Preparation of calibration gas mixtures. Static volumetric methodwill supersede BS ISO 6144:2003
PTI/15
BS EN ISO 8662:-
Hand-held portable power tools. Measurement of vibrations at the handle
BS EN ISO 8662-4 (Revision)Angle and vertical grinders
will supersede BS EN ISO 8662-4:1995
MCE/8
BS EN ISO 11040:-Prefilled syringes
BS EN ISO 11040-4Glass barrels for injectables
CH/212
BS EN ISO 11058 (Revision)
Geotextiles and geotextile related products. Determination of water permeability characteristics normal to the plane, without loadwill supersede BS EN ISO 11058:1999
B/553
BS EN 12020:-
Aluminium and aluminium alloys. Extruded precision profiles in EN-AW-6060 and EN-AW-6063
BS EN 12020-1 (Revision)
Technical conditions for inspection and deliverywill supersede BS EN 12020-1:2001
NFE/35
Page 35 of 69NEW WORK STARTED
BS EN 12020-2 (Revision)
Tolerances on dimensions and formwill supersede BS EN 12020-2:2001
NFE/35
BS EN 12691 (Revision)
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impactwill supersede BS EN 12691:2001
B/546
BS EN ISO 12956 (Revision)
Geotextiles and geotextile related products. Determination of the characteristic opening sizewill supersede BS EN ISO 12956:1999
B/553
BS EN ISO 12958 (Revision)
Geotextiles and geotextile related products. Determination of water flow capacity in their planewill supersede BS EN ISO 12958:1999
B/553
BS EN 13126:-
Building hardware. Hardware for windows and balcony doors. Requirements and test methods
BS EN 13126-15Rollers
B/538/4
BS EN 13126-16Fittings for lift and slide systems
B/538/4
BS EN 13126-17Fittings for tilt and slide systems
B/538/4
BS EN 13234 (Revision)
Advanced technical ceramics. Ceramic composites mechanical properties at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testingwill supersede DD ENV 13234:2000
RPI/13
BS EN 13235 (Revision)
Advanced technical ceramics. Ceramic composites mechanical properties at high temperature under inert atmosphere. Determination of creep behaviourwill supersede DD ENV 13235:2000
RPI/13
BS EN 13381:-
Test methods for determining the contribution to the fire resistance of structural members
BS EN 13381-1Horizontal protective membranes
FSH/22
BS EN 13501:-
Fire classification of construction products and building elements
BS EN 13501-1 (Revision)
Classification using test data from reaction to fire testswill supersede BS EN 13501-1:2002
FSH/21
BS EN 13501-2 (Revision)
Classification using data from fire resistance tests, excluding ventilation serviceswill supersede BS EN 13501-2:2003
FSH/22
BS EN 13611 (Revision)
Safety and control devices for gas burners and gas burning appliances. General requirementswill supersede BS EN 13611:2000
GSE/22
BS EN 13618:-Water supply. Hose assemblies
BS EN 13618-1
Flexible hose assemblies with or without braiding
B/503
BS EN 13618-2
Semi rigid assemblies with or without braiding
B/503
BS EN ISO 13736 (Revision)
Petroleum products and other liquids. Determination of flash point. Abel closed cup methodwill supersede BS EN ISO 13736:1998
PTI/13
BS EN 14459
Methods of risk analysis for the use of electronics in systems and control functions for gas burners and gas burning appliances
GSE/22
BS EN ISO 14896:2001/Corrigendum 1Plastics. Polyurethane raw materials. Determination of isocyanate content
PRI/42
BS EN ISO 15011:-
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
BS EN ISO 15011-3 (Revision)
Determination of ozone emission ratewill supersede BS EN ISO 15011-3:2002
WEE/40
BS EN 15287:-
Chimneys. Design, installation and commissioning of chimneys
BS EN 15287-1
Chimneys for non-roomsealed heating appliances
B/506
BS EN 15318
Design and application of gypsum blocks
B/544/1
BS EN 15320
Identification card systems. Surface transport applications. Interoperable public transport application (IOPTA)
IST/17
BS EN ISO 17249:2004/Amendment 1Safety footwear with resistance to chain saw cutting
PH/1
BS EN ISO 20344:2004/Amendment 1Personal protective equipment. Test methods for footwear
PH/1
Page 36 of 69NEW WORK STARTED
BS EN ISO 20345:2004/Amendment 1Personal protective equipment. Safety footwear
PH/1
BS EN ISO 20346:2004/Amendment 1Personal protective equipment. Protective footwear
PH/1
BS EN ISO 20347:2004/Amendment 1Personal protective equipment. Occupational footwear
PH/1
BS EN ISO 23747
Lung ventilators and related equipment. Peak expiratory flow meterswill supersede BS EN 13826:2003
CH/121/3
BS EN 60050:-
International electrotechnical vocabulary
BS EN 60050-411 (Edition 3)Rotating machinery
will supersede BS IEC 60050(411):1996
PEL/2
BS EN 60598:-Luminaires
BS EN 60598-2-20:1998/Corrigendum 4Particular requirements for lighting chains
CPL/34/4
BS EN 61338:-
Waveguide type dielectric resonators
BS EN 61338-1-4 (Edition 1)
General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimeter-wave frequency
EPL/49
BS EN 61788:-Superconductivity
BS EN 61788-7 (Revision)
Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencieswill supersede BS EN 61788-7:2002
L/-/90
BS EN 62271:-
High-voltage switchgear and controlgear
BS EN 62271-104
Alternating current switches for rated voltages of 52kv and above
PEL/17/1
BS EN 62368
Audio/video, information and communication technology equipment. Safety requirements
EPL/108
BS EN 62442:-
Energy efficiency of electrical lighting equipment. Ballasts forfluorescent lamps
BS EN 62442-1
Method of measurement to determine energy consumption of ballast-lamp circuits
CPL/34/3
BS EN 00256124:-Measurement of axle loads
BS EN 00256124-1
Interoperable 'in-service' rail vehicles
RAE/1
BS EN 261339
Packaging. Flexible aluminium tubes test method to determine the porosity of the internal coating
PKW/0
BS EN 261340
Packaging. Flexible laminate tubes test methods to determine the strength of the head welding
PKW/0
BS EN 261341
Packaging. Flexible laminate and plastic tubes test method to determine the print adhesion
PKW/0
BS EN 261342
Packaging. Flexible laminate tubes test methods to determine the strength of the side seam
PKW/0
BS EN 261343
Packaging. Flexible aluminium tubes determination of the adhesion of the internal and external protective lacquering
PKW/0
BS ISO 3937:-Cutters arbors with tenon drive
BS ISO 3937-27/24 taper. Dimensions
MTE/5
BS ISO 3937-3
Hollow taper interface with flange contact surface. Dimensions
MTE/5
BS ISO 4252
Agricultural tractors. Operator's workplace, access and exit. Dimensions
AGE/6
BS ISO 4411
Hydraulic fluid power. Valves. Determination of pressure differential / flow characteristics
MCE/18
BS ISO 4625:-
Binders for paints and varnishes. Determination of softening point
BS ISO 4625-1:2004/Amendment 1Ring-and-ball method
STI/3
BS ISO 4625-2:2004/Amendment 1Cup-and-ball method
STI/3
BS ISO 5667:-Water quality. Sampling
BS ISO 5667-15
Guidance on the preservation and handling of sludge and sediment sampleswill supersede BS 6068-6.15:1999
EH/3/6
Page 37 of 69NEW WORK STARTED
BS ISO 5667-17 (Revision)
Guidance on sampling of suspended sedimentswill supersede BS ISO 5667-17:2000
EH/3/6
BS ISO 6538:-
Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids
BS ISO 6538-1
General rules for components with fixed orifice
MCE/18
BS ISO 6538-2
General rules for components with variable or fixed orifices
MCE/18
BS ISO 6538-3
Discharge methods for components with variable or fixed orifices
MCE/18
BS ISO 6538-4
Charge method for components with variable or fixed orifices
MCE/18
BS ISO 6538-5
Alternative test methods. Simple discharge test
MCE/18
BS ISO 7302
Cereals and cereal products. Determination of total fat content
AW/4
BS ISO 8178:-
Reciprocating internal combustion engines. Exhaust emission measurement
BS ISO 8178-3 (Revision)
Definitions and methods of measurement of exhaust gas smoke under steady state conditionswill supersede BS ISO 8178-3:1994
MCE/14/-/5
BS ISO 8178-5Test fuels
MCE/14/-/5
BS ISO 8468
Ships and marine technology ships bridge layout and associated equipment. Requirements and guidelineswill supersede BS EN ISO 8468:1995
SME/32/5
BS ISO 9241:-
Ergonomics of human-system interaction
BS ISO 9241-20
Guidance for the accessibility of information communication equipment and services
PH/9
BS ISO 9413
Tyre valves. Dimensions and designationwill supersede BS AU 50-3.1E:2004
AUE/4
BS ISO 9612
Acoustics. Measurement and calculation of occupational noise engineering method
EH/1/3
BS ISO 9635:-
Agricultural irrigation equipment. Irrigation valves
BS ISO 9635-3Check valves
AGE/30
BS ISO 10110:-
Optics and photonics. Preparation of drawings for optical elements and systems
BS ISO 10110-7 (Revision)Surface imperfection tolerances
will supersede BS ISO 10110-7:1996CPW/172/1
BS ISO 11178:-
Tractors and machinery for agriculture and forestry. Serial control and communications data network
BS ISO 11783-3 (Revision)Data link layer
will supersede BS ISO 11783-3:1998AGE/6
BS ISO 12003:-
Agriculture and forestry tractors. Narrow-track wheeled tractors
BS ISO 12003-2 (Revision)
Rear-mounted roll-over protective structureswill supersede BS ISO 12003-2:2002
AGE/6
BS ISO 12635 (Revision)
Durability of wood and wood-based products. Qualitative determination of quaternary ammonium compounds in woodwill supersede BS ISO 12635:1996
PAI/43
BS ISO 14132:-
Optics and photonics. Vocabulary for telescopic systems
BS ISO 14132-5Terms for night vision systems
CPW/172
BS ISO/IEC 14496:-
Information technology. Coding of audio-visual objects
BS ISO/IEC 14496-9Reference hardware description
IST/37
BS ISO 15715:2003/Amendment 1
Binders for paints and varnishes. Determination of turbidity
STI/3
BS ISO 15819
Cosmetics. Nitrosamines. Detection and determination of n-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS
CW/217
BS ISO 16212
Cosmetics. Microbiology. Enumeration of yeast and mould
CW/217
BS ISO 17382
Oil of magnolia flower, China (Michelia alba DC)
AW/54
BS ISO/IEC 18047:-
Information technology. Automatic identification and data capture techniques
BS ISO/IEC 18047-2
RFID device conformance test methods
IST/34
Page 38 of 69NEW WORK STARTED
BS ISO/IEC 18047-6
International symbology specification. Data matrix
IST/34
BS ISO 18072:-
Ships and marine technology ship structures
BS ISO 18072-2
Requirements for their ultimate limit state assessment
SME/32/8
BS ISO 19072:-
Road vehicles. Connection interface for pyrotechnic devices, two way and three way connections
BS ISO 19072-2
Test methods and general performances requirements
AUE/16
BS ISO 19712:-
Plastics. Classification and performance of decorative solid surfacing material
BS ISO 19712-1Classification and specifications
PRI/76
BS ISO 19712-2Sheet goods
PRI/76
BS ISO 21094
Optics and photonics. Telescopic systems. Specifications for night vision devices
CPW/172
BS ISO 21100
Air cargo unit load devices. Performance requirements and test parameters
ACE/57
BS ISO 21138:-
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)
BS ISO 21138-1
Material and performance specifications for pipes, fittings and the systems
PRI/88/1
BS ISO 21138-2
Pipes with smooth external surface (all materials), type a
PRI/88/1
BS ISO 21138-3
Pipes with a non-smooth external surface (all materials), type b
PRI/88/1
BS ISO 21212
Intelligent transport systems. Communications, air-interface, long and medium range (CALM). 2G cellular systems
EPL/278
BS ISO 21213
Intelligent transport systems. Communications, air-interface, long and medium range (CALM). 3G cellular systems
EPL/278
BS ISO 21299
Agriculture and forestry machinery equipment. Powered ride-on equipment for turf maintenance applications. Roll-over protective structures (ROPS). Test procedures and acceptance criteria
AGE/20
BS ISO 22036
Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES)
EH/4
BS ISO 22574
Road vehicles. Brake linings. Friction materials. Visual inspection
AUE/11
BS ISO 22856
Equipment for crop protection. Laboratory drift methods measurements. Wind tunnels
AGE/15
BS ISO 23392
Fresh and quick-frozen maize and peas. Determination of alcohol-insoluble solids content
AW/100
BS ISO 23996
Resilient floor coverings. Determination of density
PRI/60
BS ISO 23997
Resilient floor coverings. Determination of mass per unit area
PRI/60
BS ISO 23999
Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
PRI/60
BS ISO 24153:-Random sampling procedures
BS ISO 24153-1
Quality control and designed experiment applications
SS/5
BS ISO 24353
Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation
B/540/8
BS ISO 24597
Microbeam analysis. Scanning electron microscopy. Measurement methods for image resolution
CII/9
BS ISO/IEC 24745
Information technology. Security techniques. Biometric template protection
IST/33
BS ISO/IEC TR 24800:-JPSearch
BS ISO/IEC TR 24800-1
System framework and components
IST/37
BS ISO 25780
Plastics piping systems for pressure and non-pressure water supply, irrigation or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Components intended to be installed using trenchless
PRI/88/2
Page 39 of 69NEW WORK STARTED
BS ISO/IEC 81060:-Non-invasive sphygmomanometers
BS ISO/IEC 81060-1
Requirements and test methods for mechanical type
CH/62/4
BS ISO XXXXXX
Water quality. Determination of individual isomers of nonylphenol. Method by solid phase extraction
EH/3/2BS ISO XXXXXX
Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) in un-filtrated water samples. Method by solid phase extraction and liquid chromatograph-mass spectrometry
EH/3/2
BS IEC 60412
Scintillation detectors nomenclature/type numbering standard dimensions of scintillatorswill supersede BS 5210:1975
NCE/2
BS IEC 60601:-Medical electrical equipment
BS IEC 60601-2-44 (Edition 3)
Particular requirements for the safety of X-ray equipment for computed tomographywill supersede BS EN 60601-2-44:2001
CH/62/2
BS IEC 60976
Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
CH/62/3
BS IEC 60988
Acoustic monitoring systems for loose parts detection. Characteristics, design criteria and operational procedures
NCE/8
BS IEC 61227
Nuclear power plants. Control rooms. Operator controls
NCE/8
BS IEC 61453
Nuclear instrumentation. Scintillation detector systems of gamma-ray energies for assay of radionuclides. Calibration and usage
NCE/2
BS IEC 61772
Nuclear power plants. Main control room. Application of visual display units (VDU)
NCE/8
BS IEC 61948:-
Nuclear medicine instrumentation. Routine tests
BS IEC 61948-4Radionuclide calibrators
CH/62/3
BS IEC 62232
Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure
GEL/106
DD CLC/TS 16587
Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems
GEL/9/2
PD 5500 (Revision)
Specification for fusion welded pressure vesselswill supersede PD 5500:2003
PVE/1
PD 8010:-Code of practice for pipelines
PD 8010-3
Codified approach for the on-shore application of pipeline risk assessment for lUP advice to local planning authorities
PSE/17/2
PD CEN ISO/TR 3834:-
Quality requirements for welding. Fusion welding of metallic materials
PD CEN ISO/TR 3834-6
Guidance on implementing ISO 3834
WEE/-/1
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT05/00422006 DC
prEN 1548 Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing.Method for exposure to bitumen
B/546/2Comments for the above document are required by 15 November, 2005
05/19976767 DC
BS ISO 11783-10 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 10. Task controller and management information system data interchange
AGE/6
05/19978685 DC
BS EN 74-3 Couplers, spigot pins and base plates for use in falsework and scaffolds. Part 3. Plain base plates and spigot pins. Requirements and test methods
B/514/21
05/19982631 DC
BS ISO 9150 Protective clothing. Determination of behaviour of materials on impact of small splashes of molten metal
PH/3/2
05/19990229 DC
BS ISO 9928-2 Cranes. Crane driving manual. Part 2. Mobile cranes
MHE/3/5Comments for the above document are required by 24 October, 2005
05/30057604 DC
BS 8504-1 Beach safety flags. Part 1. Colour, shape and meaning
PH/8/2/1
05/30057907 DC
BS 6465-1 Sanitary installations. Part 1. Code of practice for design of sanitary facilities and scale of provision of sanitary appliances
B/503
05/30059424 DC
ISO 19134 Geographic information. Location based services. Multimodal routing and navigation
IST/36
Page 40 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30067086 DC
EN 203-2-7 Gas heated catering equipment. Part 2-7. Specific requirements. Salamanders and rotisseries
GSE/19
05/30075032 DC
ISO 23181 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
MCE/18/-/6
05/30082472 DC
BS 7121-1 Code of practice for safe use of cranes. Part 1. General
MHE/3/11Comments for the above document are required by 31 October, 2005
05/30086722 DC
EN 15329 Railway applications. Braking. Brake block holder and brake shoe key for railway vehicles
RAE/4
05/30086725 DC
EN 15328 Railway applications. Braking. Brake pads
RAE/4
05/30090874 DC
EN 15327-1 Railway applications. Passenger alarm subsystem. Part 1. General requirements and passenger interface for the passenger emergency brake system
RAE/4
05/30091636 DC
ISO 14577-4 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 4. Test method for metallic and non-metallic coatings
ISE/NFE/4/5
05/30093062 DC
prEN 15269-2 Extended application of test results for doorsets and shutter assemblies. For doors and shutters. Part 2. Steel hinged and pivoted doorsets£18.00 members£36.00 non-members
FSH/22
05/30095753 DC
ISO 7500-2 Metallic materials. Verification of static uniaxial testing machines. Part 2. Tension creep testing machines. Verification of the force applied
ISE/NFE/4/1
05/30097610 DC
BS ISO 23714 Pulps. Determination of water retention value (WRV)
PAI/11Comments for the above document are required by 14 November, 2005
05/30098235 DC
ISO 21081-1 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Part 1. General principles
MCE/18/-/6
05/30098238 DC
ISO 21081-2 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Part 2. Filter blockage technique
MCE/18/-/6
05/30099720 DC
EN 12368 Traffic control equipment. Signal heads
EPL/526
05/30099723 DC
EN 12352 Traffic control equipment. Warning and safety light devices
EPL/526
05/30102528 DC
IEC 62385 Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels
NCE/2
05/30102865 DC
EN ISO 19493 Water quality. Guidance on marine biological surveys of littoral and sublittoral hard bottoms
EH/3/5
05/30103531 DC
BS IEC 62275 Cable management. Cable ties for cable installations
PEL/213Comments for the above document are required by 28 October, 2005
05/30106456 DC
IEC 62282-6 Fuel cell technologies. Part 6-1. Micro fuel cell power systems. Safety£18.00 members£36.00 non-members
GEL/105
05/30107743 DC
ISO/IEC 19794-7 Biometric data interchange. Part 7. Signature/sign data
IST/44Comments for the above document are required by 31 October, 2005
05/30107760 DC
ISO/IEC 24713-1 Biometric profiles for interoperability and data interchange. Part 1. Biometric reference architecture
IST/44Comments for the above document are required by 31 October, 2005
05/30111064 DC
BS 7291-1 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 1. General requirements
PRI/88/2Comments for the above document are required by 31 December, 2005
05/30111066 DC
BS 7291-2 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 2. Specification for polybutylene (PB) pipes and associated fittings
PRI/88/2Comments for the above document are required by 31 December, 2005
05/30111068 DC
BS 7291-3 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 3: Specification for cross-linked polyethylene (PE-X) pipes and associated fittings
PRI/88/2Comments for the above document are required by 31 December, 2005
Page 41 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30111479 DC
ISO/IEC 19794-8 Biometrics. Biometric data interchange formats. Part 8. Finger pattern skeletal data
IST/44
05/30113382 DC
BS ISO 21630 Pumps. Testing. Submersible mixers for wastewater and similar applications
MCE/6Comments for the above document are required by 31 October, 2005
05/30115485 DC
EN 1739 Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
B/523Comments for the above document are required by 15 November, 2005
05/30115489 DC
EN 15304 Determination of the freeze-thaw resistance of autoclaved aerated concrete
B/523Comments for the above document are required by 15 November, 2005
05/30117679 DC
IEC 60515 ED 2 Nuclear power plants. Instrumentation important to safety. Radiation detectors. Characteristics and test methods
NCE/8
05/30118212 DC
BS 8469 Personal protective equipment for fire-fighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
PH/14Comments for the above document are required by 31 October, 2005
05/30122495 DC
IEC 62153-4-1 Metallic communication cable test methods. Part 4-1. Electro magnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements
EPL/46
05/30122498 DC
IEC 62153-4-0 Metallic communication cable test methods. Part 4-0. Electro magnetic compatibility (EMC). Relationship between surface transfer impedance and screening attenuation, recommended limits
EPL/46
05/30123357 DC
BS 8504-2 Beach safety flags. Part 2. Materials
PH/8/2/1
05/30124529 DC
ISO 20552 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
EH/2/2
05/30126248 DC
BS EN 71-5 Safety of toys. Part 5. Chemical toys (sets) other than experimental sets
CW/15Comments for the above document are required by 15 October, 2005
05/30127022 DC
ISO 4928 Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120$0DC max.)
PRI/69
05/30127561 DC
BS 8470 Code of practice for the secure destruction of confidential material
GW/2
05/30127645 DC
ISO 15364 Ships and marine technology. Pressure/vacuum valves for cargo tanks
SME/32/3
05/30128342 DC
ISO 15223-1 Medical devices. Symbols to be used with medical device labels, labelling, and information to be supplied. Part 1. General requirements
CH/210/3
05/30128661 DC
EN 13779 Ventilation for non residential buildings. Performance requirements for ventilation and room-conditioning systems
RHE/2
05/30129194 DC
EN 15317 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
WEE/46
05/30129363 DC
ISO 9170-1 Terminal units for medical gas pipeline systems. Part 1. Terminal units for use with compressed medical gases and vacuum
CH/121/6
05/30129368 DC
ISO 9170-2 Terminal units for medical gas pipeline systems. Part 2. Terminal units for anaesthetic gas scavenging systems
CH/121/6
05/30129374 DC
ISO 15002 Flow-metering devices for connection to terminal units of medical gas pipeline systems
CH/121/6
05/30129688 DC
IEC 61156-5-1 ED 2 Multicore and symmetrical pair/quad cables for digital communications. Part 5-1. Symmetrical pair/quad cables with transmission characteristics up to 600 MHz. Horizontal floor wiring. Blank detail specification
EPL/46
05/30133088 DC
BS ISO 18332 Metallic and other inorganic coatings. Definitions and conventions concerning porosity
STI/33Comments for the above document are required by 28 October, 2005
05/30133509 DC
BS 7593 Code of practice for treatment of water in domestic hot water central heating systems
CII/62Comments for the above document are required by 31 December, 2005
Page 42 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30133687 DC
BS EN 1269 A1 Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test
PRI/3
05/30135018 DC
ISO/IEC 24711 Method for determination of ink cartridge yield for color inkjet printers and multifunction devices that may contain printer components
IST/3
05/30135332 DC
BS 6102-3 A4 Cycles. Part 3. Specification for photometric and physical requirements of lighting equipment
GME/25
05/30135987 DC
EN 161 Automatic shut-off valves for gas burners and gas appliances
GSE/22
05/30136075 DC
ISO 1841 Cosmetics. Microbiology. Detection of Candida albicans
CW/217Comments for the above document are required by 31 October, 2005
05/30137202 DC
ISO/IEC 18000-6 A1 Information technology. Radio frequency identification for item management. Part 6. Parameters for air interface communications at 860 MHz to 960 MHz£18.00 members£36.00 non-members
IST/34Comments for the above document are required by 31 October, 2005
05/30137420 DC
IEC 60086-1 Primary batteries. Part 1. General
CPL/35
05/30137514 DC
IEC 60747-14-4 Discrete semiconductor devices. Part 14-4. Semiconductor accelerometers£18.00 members£36.00 non-members
EPL/47
05/30137551 DC
ISO 21415-2 Wheat and wheat flour. Gluten content. Part 2. Determination of wet gluten by mechanical means
AW/4
05/30137579 DC
EN 13834 Cookware. Ovenware for use in traditional domestic ovens
CW/9
05/30137582 DC
ISO 24497-1 Non-destructive testing. Metal magnetic memory. Part 1. General requirements
WEE/46
05/30137585 DC
ISO 24497-2 Non-destructive testing. Metal magnetic memory. Part 2. Terms and definitions
WEE/46
05/30137588 DC
ISO 24497-3 Non-destructive testing. Metal magnetic memory. Part 3. Inspection of welds
WEE/46
05/30137603 DC
ISO 24014-1 Public transport. Interoperable fare management system. Part 1. Architecture
EPL/278
05/30137614 DC
ISO 18672-1 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 1. Pipes and fittings with flexible joints
PRI/88/2
05/30137621 DC
EN 1564/prA1 Founding. Austempered ductile cast irons
ISE/35Comments for the above document are required by 28 October, 2005
05/30137627 DC
EN ISO 16000-7 Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations
EH/2/3
05/30137694 DC
ISO 21501-2 Determination of particle size distribution. Single particle light-interaction methods. Part 2. Light-scattering liquid-borne particle counter
LBI/37
05/30137697 DC
ISO 21501-3 Determination of particle size distribution. Single particle light-interaction methods. Part 3. Light-extinction liquid-borne particle counter
LBI/37
05/30137700 DC
ISO 21501-4 Determination of particle size distribution. Single particle light-interaction methods. Part 4. Light-scattering airborne particle counter for clean spaces
LBI/37
05/30137717 DC
EN 15312 Free access multi-sports equipment. Requirements, including safety and test methods
SW/65
05/30137729 DC
ISO 8061 AMD 3 Alpine ski-bindings. Selection of release torque values
SW/136
05/30137732 DC
ISO 11088 AMD 1 Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
SW/136
05/30137735 DC
ISO 22264 Telemark ski-boots for adults. Interface with Telemark ski-bindings. Requirements and test methods
SW/136
05/30137738 DC
ISO 9523 Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
SW/136
Page 43 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30137754 DC
ISO/IEC 18004 Information technology. Automatic identification and data capture techniques. Bar code symbology specification. QR code£18.00 members£36.00 non-members
IST/34
05/30137789 DC
BS ISO 12465 Plywood. Specifications
B/541
05/30137797 DC
IEC 61400-25-1 ED 1 Wind turbines. Part 25-1. Communications for monitoring and control of wind power plants. Overall description of principles and models
PEL/88
05/30137801 DC
IEC 61400-25-2 ED 1 Wind turbines. Part 25-2. Communications for monitoring and control of wind power plants. Information models
PEL/88
05/30137805 DC
IEC 61400-25-3 ED 1 Wind turbines. Part 25-3. Communications for monitoring and control of wind power plants. Information exchange models
PEL/88
05/30137809 DC
IEC 61400-25-4 ED 1 Wind turbines. Part 25-4. Communications for monitoring and control of wind power plants. Mapping to XML based communication profile£18.00 members£36.00 non-members
PEL/88
05/30137813 DC
IEC 61400-25-5 ED 1 Wind turbines. Part 25-5. Communications for monitoring and control of wind power plants. Conformance testing
PEL/88
05/30137839 DC
ISO 3776-1 Tractors and machinery for agriculture. Seat belts. Part 1. Anchorage location requirements
AGE/6
05/30137842 DC
ISO 9679 Aerospace. Clamps for fluid systems. Test methods
ACE/69
05/30137845 DC
ISO 12319 Aerospace. Clamps 'P' (loop style). Procurement specification
ACE/69
05/30137850 DC
IEC 62215-2 Integrated circuits. Measurement of impulse immunity. Part 2. Impulse injection method
EPL/47
05/30137873 DC
EN 15315 Heating systems in buildings. Energy performance of buildings. Overall energy use, primary energy and CO$d2 emissions
RHE/24
05/30137882 DC
EN 15316-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 1. General
RHE/24
05/30137885 DC
EN 15316-3-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3.1. Domestic hot water systems, characterisation of needs (tapping requirements)
RHE/24
05/30137890 DC
EN 15316-3-2 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3.2. Domestic hot water systems, distribution
RHE/24
05/30137893 DC
EN 15316-3-3 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3-3. Domestic hot water systems, generation
RHE/24
05/30137922 DC
ISO 13865-3 Safety of machinery. Pressure-sensitive protective devices. Part 3. General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
MCE/3
05/30137930 DC
ISO 16100-4 Industrial automation systems and integration. Manufacturing software capability profiling for interoperability. Part 4. Conformance test methods, criteria and reports
AMT/5
05/30137946 DC
EN 15269-1 Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and windows. Part 1. General requirements for fire resistance
FSH/22
05/30137949 DC
EN 15269-3 Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and shutters. Part 3. Timber hinged and pivoted doorsets
FSH/22
05/30137978 DC
EN 15273-1 Railway applications. Gauges. Part 1. Generalities. Common rules for infrastructure and rolling stock
RAE/1/-/12
05/30137981 DC
EN 15273-2 Railway applications. Gauges. Part 2. Rolling stock gauges£18.00 members£36.00 non-members
RAE/1/-/12
05/30138000 DC
IEC 60155 AMD 2 Glow-starters for fluorescent lamps
CPL/34/1
05/30138005 DC
IEC 60079-14 ED 4 Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)
GEL/31/11
Page 44 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30138009 DC
EN 15319 General principles of design of fibrous (gypsum) plaster works
B/544/1
05/30138017 DC
ISO/IEC 14471 Information technology. Software engineering. Guidelines for the adoption of CASE tools
IST/15Comments for the above document are required by 31 October, 2005
05/30138025 DC
ISO/IEC 14102 Information technology. Guideline for the evaluation and selection of CASE tools
IST/15Comments for the above document are required by 31 October, 2005
05/30138030 DCISO 2074 Plywood. Vocabulary
B/541
05/30138051 DC
EN 60335-2-79/prA1 Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high pressure cleaners and steam cleaners
CPL/61/10
05/30138064 DC
IEC CISPR16-1-1 AMD 2 ED 1 Specification for radio disturbance and immunity measuring apparatus methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Selectivity of measuring receiver in the frequency range 1GHz to 18GHz
GEL/210/12
05/30138070 DC
IEC 60598-2-27 ED 1 Luminaires. Part 2-27. Luminaires for neon lamp and similar equipment
CPL/34/4
05/30138085 DC
IEC CISPR 16-2-1 AMD 2 ED 1 Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of disturbance and immunity. Conducted disturbance measurements
GEL/210/12
05/30138123 DC
BS ISO 8836 Suction catheters for use in the respiratory tract
CH/121/2
05/30138125 DC
ISO 9911 Agricultural irrigation equipment. Manually operated small plastics valves
AGE/30
05/30138145 DC
BS 6172 AMD 1 Specification of installation of gas cooking appliances (1st, 2nd and 3rd family gases)
GSE/30/-/10
05/30138148 DC
EN 215:2004/prA1 Thermostatic radiator valves. Requirements and test methods
RHE/16Comments for the above document are required by 14 November, 2005
05/30138201 DC
ISO 12696 Cathodic protection of steel in concrete
ISE/NFE/8
05/30138208 DC
ISO 9635-1 Agricultural irrigation equipment. Irrigation valves. Part 1. General requirements
AGE/30
05/30138211 DC
ISO 9635-2 Agricultural irrigation equipment. Irrigation valves. Part 2. Isolating valves
AGE/30
05/30138214 DC
ISO 9635-3 Agricultural irrigation equipment. Irrigation valves. Part 3. Check valves
AGE/30
05/30138217 DC
ISO 9635-4 Agricultural irrigation equipment. Irrigation valves. Part 4. Air valves
AGE/30
05/30138220 DC
ISO 9635-5 Agricultural irrigation equipment. Irrigation valves. Part 5. Control valves
AGE/30
05/30138231 DC
ISO 8407 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
ISE/NFE/8
05/30138250 DC
IEC CISPR 16-4-1 AMD 2 Specification for radio disturbance and immunity measuring apparatus and methods. Part 4-1. Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests
GEL/210/12
05/30138264 DC
EN 12592 Bitumen and bituminous binders. Determination of solubility
PTI/13
05/30138267 DC
EN 1426 Bitumen and bituminous binders. Determination of needle penetration
PTI/13
05/30138270 DC
EN 12593 Bitumen and bituminous binders. Determination of the Fraass breaking point
PTI/13
05/30138273 DC
EN 1427 Bitumen and bituminous binders. Determination of the softening point. Ring and ball method
PTI/13
05/30138276 DC
EN 12595 Bitumen and bituminous binders. Determination of kinematic viscosity
PTI/13
05/30138279 DC
EN 12594 Bitumen and bituminous binders. Preparation of test samples
PTI/13
05/30138282 DC
EN 12596 Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
PTI/13
Page 45 of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
05/30138285 DC
EN 12606-1 Bitumen and bituminous binders. Determination of the paraffin wax content. Part 1. Method by distillation
PTI/13
05/30138288 DC
EN 12607-1 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 1. RTFOT method
PTI/13
05/30138291 DC
EN 12607-2 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 2. TFOT method
PTI/13
05/30138294 DC
EN 12607-3 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 3. RFT method
PTI/13
05/30138310 DC
ISO 15882 ED 2 Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results
LBI/35Comments for the above document are required by 18 October, 2005
05/30138350 DC
EN 15322 Bitumen and bituminous binders. Framework for specifying cutback and fluxed bituminous binders
PTI/13
05/30138353 DC
EN 15323 Bitumen and bituminous binders. Accelerated long-term ageing conditioning by the rotating cylinder method (RCAT)
PTI/13
05/30138357 DC
EN 15324 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
PTI/13
05/30138360 DC
EN 15325 Bitumen and bituminous binders. Determination of zero shear viscosity (ZSV) using a shear stress rheometer in creep mode
PTI/13
05/30138363 DC
EN 15326 Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary-stoppered pyknometer method
PTI/13
05/30138371 DC
IEC 60068-2-27 ED 4 Basic environmental testing procedures. Part 2-27. Tests. Test Ea and guidance. Shock and bump
GEL/104
05/30138375 DC
IEC 60068-2-31 ED 2 Basic environmental testing procedures. Part 2-31. Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
GEL/104
05/30138385 DC
EN 50440 Efficiency of domestic electrical storage water-heaters
CPL/59
05/30138424 DC
BS 8450 Code of practice for installation of electrical and electronic equipment in ships
JPEL/18
05/30138425 DC
ISO 4254-5 Agricultural machinery. Safety. Part 5. Power-driven soil-working equipment
AGE/6
05/30138432 DC
BS EN 1501-1 Refuse collection vehicles. General requirements and safety requirements. Part 1. Rear loaded refuse collection vehicles
B/508/1
05/30138471 DC
EN ISO 16276-2 Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film. Part 2. Cross-cut testing and X-cut testing
STI/27
05/30138485 DC
EN 50469 Lightning protection systems. Symbols
GEL/81
05/30138590 DC
BS 6007 Electric cables. Single core unsheathed heat-resisting cables for voltages up to and including 450/750 V, for internal wiring
GEL/20/17
05/30138592 DC
BS 6231 Electric cables. 600/1000 V, PVC insulated cables for switchgear and controlgear wiring
GEL/20/17
05/30138596 DC
BS 6195 Electric cables. Insulated flexible cables and cords for coil leads
GEL/20/17
DOCUMENTS NOT ISSUED AS DPCsBS EN 1994:-
Eurocode 4. Design of composite steel and concrete structures
BS EN 1994-1:-General rules
BS EN 1994-1-2Structural fire design
This standard will shortly be prepared for publication. Please submit any comments to the committee secretary (below).Contact: Frank ThomasEmail: frank.thomas@bsi-global.com
B/525/4
BS ISO 13357:-
Petroleum products. Determination of the filterability of lubricating oils
Page 46 of 69DOCUMENTS NOT ISSUED AS DPCs
BS ISO 13357-2Procedure for dry oils
Copies of this document are available upon request from the committee secretary (below).Contact: Simon MerrimanEmail: simon.merriman@bsi-global.com
MCE/18/-/16
BS ISO 21148
Cosmetics. Microbiology. General instructions for microbiological examination
Please direct any comments or queries regarding this forthcoming standard to the committee secretary (below).Contact: William BuckinghamEmail: william.buckingham@bsi-global.com
CW/217
prEN 2602
Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2603
Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2604
Aerospace series. 8$0DC 30' interface for adaptors, threaded, with lockring. Geometric configuration
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2605
Aerospace series. 24$0DC interface for adaptors, threaded, with lockring. Geometric configuration
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2608
Aerospace series. Installation and removal requirements for 8$0DC 30' adaptors, threaded, with lockring
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2645
Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
prEN 2713:-
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 200$0DC
prEN 2713-003
Screened (spiral) and jacketed, ink jet printable. Product standard
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/6/-/2
prEN 2713-007
Screened (spiral) and jacketed, UV laser printable. Product standard
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/6/-/2
prEN 2714:-
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC
prEN 2714-007
Screened (spiral) and jacketed, UV laser printable. Product standard
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/6/-/2
prEN 2714-013
DR family, screened (spiral) and jacketed, UV laser printable. Product standard
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/6/-/2
prEN 4610
Aerospace series. Pipe coupling 8$0DC 30' in titanium alloy. Elbows 45$0DC, with thrust wire nut
To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: tracey.wilkins@bsi-global.com
ACE/69
Page 47 of 69DOCUMENTS NOT ISSUED AS DPCs
prEN 15285
Agglomerated stone. Modular tiles for flooring (internal and external)
This Draft European Standard has been issued by CEN for Enquiry with a closing date of 30 November, 2005. It will not be issued for public comment in the UK because it covers agglomerated stone as a generic product in which the UK has little or no interesContact: David FisherEmail: david.fisher@bsi-global.com
B/545
prEN 15286
Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
This Draft European Standard has been issued by CEN for Enquiry with a closing date of 30 November, 2005. It will not be issued for public comment in the UK because it covers agglomerated stone as a generic product in which the UK has little or no interesContact: David FisherEmail: david.fisher@bsi-global.com
B/545
prEN 45510:-
Guide for procurement of power station equipment
prEN 45510-2:-Electrical equipment
prEN 45510-2-9Cabling systems
This Draft European Standard has been circulated by CEN/CENELEC at Enquiry stage. However, the UK committee responsible for input is dormant and it has therefore not been circulated for public comment. The text of the Enquiry Draft is nonetheless availablContact: Committee Service CentreEmail: csc@bsi-global.com
E/-/20
ISO 6580:2005
General-purpose industrial fans. Circular flanges. Dimensions
This International Standard has recently been published by ISO, and will shortly be implemented in the UK as a revision of dual-numbered standard BS 6339:1983 (ISO 6580:1981).Contact: Committee Service CentreEmail: csc@bsi-global.com
MCE/17
ISO/IEC 15938:-
Information technology. Multimedia content description interface
ISO/IEC 15938-4:2002/FPDAM 2Audio
This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the committee secretary (below), to whom comments should be submitted by 30 October, 2005.Contact: Jean StrideEmail: jean.stride@bsi-global.com
IST/37
CEN/CENELEC UNIQUE ACCEPTANCE PROCEDUREBS EN 12961:2005
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
The text of this Draft European Standard has been circulated for approval to publish by October 2005. Copies are available on request using document reference B/546.0036/05 from the committee secretary (below), to whom comments should be submitted by 30Contact: Ray KerriganEmail: ray.kerrigan@bsi-global.com
B/546
prEN 1854
Pressure sensing devices for gas burners and gas burning appliances
Please direct any comments regarding this Draft European Standard to the committee secretary (below).Contact: Bernard WilliamsEmail: bernard.williams@bsi-global.com
GSE/22/12
prEN ISO 4925:-
Binders for paints and varnishes. Determination of softening point
prEN ISO 4925-1:2005Ring-and-ball method
This Draft European Standard has already been implemented in the UK as BS ISO 4925-1:2004. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: csc@bsi-global.com
STI/3
prEN ISO 4925-2:2005Cup-and-ball method
This Draft European Standard has already been implemented in the UK as BS ISO 4925-2:2004. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: csc@bsi-global.com
STI/3
EN ISO 6141
Gas analysis. Requirements for certificates for calibration gases and gas mixtures
This standard, which has not been issued as a Draft for Public Comment and is identical to ISO 6141:2000, has been circulated to CEN members for voting. Please submit any comments to the committee secretary (below) by 19 December, 2005.Contact: Sheila O'ReillyEmail: sheila.o'reilly@bsi-global.com
PTI/15
EN ISO 6143
Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
This standard, which has not been issued as a Draft for Public Comment and is identical to ISO 6143:2001, has been circulated to CEN members for voting. Please submit any comments to the committee secretary (below) by 19 December, 2005.Contact: Sheila O'ReillyEmail: sheila.o'reilly@bsi-global.com
PTI/15
Page 48 of 69CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE
EN ISO 6144
Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
This standard, which has not been issued as a Draft for Public Comment and is identical to ISO 6144:2003, has been circulated to CEN members for voting. Please submit any comments to the committee secretary (below) by 19 December, 2005.Contact: Sheila O'ReillyEmail: sheila.o'reilly@bsi-global.com
PTI/15
prEN ISO 10283:2005
Binders for paints and varnishes. Determination of monomeric diisocyanates in polyisocyanate resins
This Draft European Standard has already been implemented in the UK as BS 6782-10:1998. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: csc@bsi-global.com
STI/3
EN 12259:-
Fixed firefighting systems. Components for sprinkler and water spray systems
EN 12259-1:1999/prA1:2001Sprinklers
This is a proposed amendment to normative annex B Test to determine operating temperatures of fusible link sprinklers and glass bulb sprinklers, specifically to the text of B.1 Apparatus & B.2 Procedure and to figure B.1, to address errors that have beenContact: Mike HodsonEmail: mike.hodson@bsi-global.com
FSH/18/2
EN 12817:2002/prA1
LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$d3 overground
This draft amendment has been circulated by CEN/286 under a shortened UAP procedure. A copy of the text may be obtained on request from the committee secretary (below).Contact: Tim NewinsEmail: tim.newins@bsi-global.com
PVE/19
EN 12818:2002/prA1
LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$d3 underground
This draft amendment has been circulated by CEN/286 under a shortened UAP procedure. A copy of the text may be obtained on request from the committee secretary (below).Contact: Tim NewinsEmail: tim.newins@bsi-global.com
PVE/19
EN 13952:2003
LPG equipment and accessories. Filling procedures for LPG cylinders
This draft amendment has been circulated by CEN/286 under a shortened UAP procedure. A copy of the text may be obtained on request from the committee secretary (below).Contact: Tim NewinsEmail: tim.newins@bsi-global.com
PVE/19
prEN 14870:-
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems
prEN 14870-3Flanges
The text of this ISO TC 67 SC 2 document has been issued by CEN TC 12. The UK participated actively in the preparation of the equivalent ISO publication, so it is accordingly proposed that a vote of acceptance be submitted in the CEN TC 12 ballot. PleaseContact: Keith SeydeEmail: keith.seyde@bsi-global.com
PSE/17
prEN ISO 15715:2005
Binders for paints and varnishes. Determination of turbidity
This Draft European Standard has already been implemented in the UK as BS ISO 15715:2003. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: csc@bsi-global.com
STI/3
CEN EUROPEAN STANDARDS
EN 492:-
Fibre-cement slates and fittings. Product specification and test methodsAMENDMENT 1:August 2005to EN 492:2004
£19.00 members£20.00 non-members
B/542/4
EN 494:-
Fibre-cement profiled sheets and fittings. Product specification and test methodsAMENDMENT 1:August 2005to EN 494:2004
£19.00 members£20.00 non-members
B/542/4
EN 681:-
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications
EN 681-1:-Vulcanized rubber
AMENDMENT 3:August 2005to EN 681-1:1996
£19.00 members£20.00 non-members
PRI/70
EN 681-2:-Thermoplastic elastomers
AMENDMENT 2:August 2005to EN 681-2:2000
£19.00 members£20.00 non-members
PRI/70
EN 681-3:-
Cellular materials of vulcanized rubberAMENDMENT 3:August 2005to EN 681-3:2000
£19.00 members£20.00 non-members
PRI/70
EN 681-4:-
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Part 4. Cast polyurethane sealing elementsAMENDMENT 2:August 2005to EN 681-4:2000
£19.00 members£20.00 non-members
PRI/70
Page 49 of 69CEN EUROPEAN STANDARDS
EN 682:-
Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsAMENDMENT 1:August 2005to EN 682:2005
£19.00 members£20.00 non-members
PRI/70
EN 695:2005
Kitchen sinks. Connecting dimensions£49.40 members£52.00 non-members
B/503
EN 957:-Stationary training equipment
EN 957-1:2005
General safety requirements and test methods£60.80 members£64.00 non-members
SW/136/4
EN 957-10:2005
Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods£49.40 members£52.00 non-members
SW/136/4
EN 1001:-
Durability of wood and wood-based products. Terminology
EN 1001-2:2005Vocabulary
£133.00 members£140.00 non-members
B/515
EN 1071:-
Advanced technical ceramics. Methods of test for ceramic coatings
EN 1071-3:2005
Determination of adhesion and other mechanical failure modes by a scratch test£114.00 members£120.00 non-members
RPI/13
EN 1097:-
Tests for mechanical and physical properties of aggregates
EN 1097-9:-
Determination of the resistance to wear by abrasion from studded tyres. Nordic testAMENDMENT 1:August 2005to EN 1097-9:1998
£19.00 members£20.00 non-members
B/502/6
EN 1104:2005
Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents£49.40 members£52.00 non-members
CW/47/3
EN 1266:-
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gasesAMENDMENT 1:August 2005to EN 1266:2002
£19.00 members£20.00 non-members
GSE/36
EN 1504:-
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
EN 1504-1:2005Definitions
£49.40 members£52.00 non-members
B/517/8
EN 1744:-
Tests for chemical properties of aggregates
EN 1744-4:2005
Determination of water susceptibility of fillers for bituminous mixtures£60.80 members£64.00 non-members
B/502
EN 1888:-
Child care articles. Wheeled child conveyances. Safety requirements and test methodsAMENDMENT 1:August 2005to EN 1888:2003
£19.00 members£20.00 non-members
CW/39
EN 1888:-
Child care articles. Wheeled child conveyances. Safety requirements and test methodsAMENDMENT 2:August 2005to EN 1888:2003
£19.00 members£20.00 non-members
CW/39
EN 1888:-
Child care articles. Wheeled child conveyances. Safety requirements and test methods.AMENDMENT 3:August 2005to EN 1888:2003
£19.00 members£20.00 non-members
CW/39
EN 2088:2005
Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Clad sheet and strip. 0,4 mm < or = a < or = 6 mm£49.40 members£52.00 non-members
ACE/61/-/24
EN 2731:2005
Aerospace series. Magnesium alloy MG-C46001-T6. Sand casting£49.40 members£52.00 non-members
ACE/61/-/24
EN 4204:2005
Aerospace series. Aluminium alloy AL-P8090-T841. Sheet. 0,6 mm <= a <= 6 mm£49.40 members£52.00 non-members
ACE/61/-/24
EN 4449:2005
Aerospace series. Aluminium alloy AL-P7050-T76. Sheet. 0,8 mm <= a <= 6 mm£49.40 members£52.00 non-members
ACE/61/-/24
Page 50 of 69CEN EUROPEAN STANDARDS
EN 10027:-Designation system for steels
EN 10027-1:2005Steel names
£87.40 members£92.00 non-members
ISE/5
EN 10224:-
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditionsAMENDMENT 1:June 2005to EN 10224:2002
£19.00 members£20.00 non-members
ISE/8
EN 10226:-
Pipe threads where pressure-tight joints are made on the threads
EN 10226-2:2005
Taper external threads and taper internal threads. Dimensions, tolerances and designation.£49.40 members£52.00 non-members
ISE/19
EN 12044:2005
Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements£121.60 members£128.00 non-members
MCE/3/12
EN 12186:-
Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirementsAMENDMENT 1:August 2005to EN 12186:2000
£19.00 members£20.00 non-members
GSE/33
EN 12279:-
Gas supply systems. Gas pressure regulating installations on service lines. Functional requirementsAMENDMENT 1:August 2005to EN 12279:2000
£19.00 members£20.00 non-members
GSE/33
EN 12331:-
Food processing machinery. Mincing machines. Safety and hygiene requirementsAMENDMENT 1:July 2005to EN 12331:2003
£19.00 members£20.00 non-members
MCE/3/5
EN 12467:-
Fibre-cement flat sheets. Product specification and test methodsAMENDMENT 1:August 2005to EN 12467:2004
£19.00 members£20.00 non-members
B/542/4
EN 12497:2005
Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract£49.40 members£52.00 non-members
CW/47
EN 12498:2005
Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of cadmium and lead in an aqueous extract£49.40 members£52.00 non-members
CW/47
EN 12546:-
Materials and articles in contact with foodstuffs. Insulated containers for domestic use
EN 12546-1:-
Specification for vacuum ware, insulated flasks and jugsAMENDMENT 1:March 2005to EN 12546-1:2005
£19.00 members£20.00 non-members
CW/9
EN 12641:-
Swap bodies and commercial vehicles. Tarpaulins
EN 12641-1:2005Minimum requirements
£49.40 members£52.00 non-members
TW/1
EN 13084:-Free-standing chimneys
EN 13084-4:2005Brick liners. Design and execution
£100.70 members£106.00 non-members
B/525/13
EN 13136:-
Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Method for calculationAMENDMENT 1:June 2005to EN 13136:2001
£19.00 members£20.00 non-members
RHE/18
EN 13155:-
Cranes. Non-fixed load lifting attachmentsAMENDMENT 1:August 2005to EN 13155:2003
£19.00 members£20.00 non-members
MHE/3/5
EN 13209:-
Child use and care articles. Baby carriers. Safety requirements and test methods
EN 13209-2:2005Soft carriers
£60.80 members£64.00 non-members
CW/41
EN 13480:-Metallic industrial piping
EN 13480-3:-
Design and calculation. Calculation method for large openingsAMENDMENT 1:August 2005to EN 13480-3:2002
£19.00 members£20.00 non-members
PVE/10
EN 13518:-
Footwear. Test methods for uppers. Water resistanceAMENDMENT 1:July 2005to EN 13518:2001
£19.00 members£20.00 non-members
TCI/69
Page 51 of 69CEN EUROPEAN STANDARDS
EN 13732:-
Food processing machinery. Bulk milk coolers on farms. Requirements for construction, performance, suitability for use, safety and hygiene.AMENDMENT 1:August 2005to EN 13732:2002
£19.00 members£20.00 non-members
MCE/3/5
EN 13845:2005
Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification£60.80 members£64.00 non-members
PRI/60
EN 14241:-
Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods
EN 14241-1:2005Seals in flue liners
£60.80 members£64.00 non-members
B/506/2
EN 14321:-
Glass in building. Thermally toughened alkaline earth silicate safety glass
EN 14321-2:2005
Evaluation of conformity. Product standard£100.70 members£106.00 non-members
B/520/1
EN 14471:2005
Chimneys. System chimneys with plastic flue liners. Requirements and test methods£121.60 members£128.00 non-members
B/506/2
EN 14501:2005
Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification£87.40 members£92.00 non-members
B/538/3
EN 14600:2005
Doorsets and openable windows with fire resisting and/or smoke control characteristics. Requirements and classification£87.40 members£92.00 non-members
B/538/2
EN 14639:2005
Crude tar and crude benzole. Characteristics and test methods£49.40 members£52.00 non-members
CII/56
EN 14672:2005
Characterization of sludges. Determination of total phosphorous£49.40 members£52.00 non-members
EH/5
EN 14719:2005
Pulp, paper and board. Determination of the diisopropylnaphtalene (DIPN) content by solvent extraction£49.40 members£52.00 non-members
PAI/11
EN 14721:2005
Precast concrete products. Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete£49.40 members£52.00 non-members
B/524
EN 14735:2005
Characterisation of waste. Preparation of waste sample for ecotoxicity test.£100.70 members£106.00 non-members
B/508/3
EN 14744:2005
Inland navigation vessels and sea-going vessels. Navigation light£100.70 members£106.00 non-members
SME/32/7
EN 14757:2005
Water quality. Sampling of fish with multi-mesh gillnets£87.40 members£92.00 non-members
EH/3/5
EN 14784:-
Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates
EN 14784-1:2005Classification of systems
£87.40 members£92.00 non-members
WEE/46
EN 14784-2:2005
General principles for testing of metallic materials using X-rays and gamma rays£60.80 members£64.00 non-members
WEE/46
EN 14864:2005
Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification£49.40 members£52.00 non-members
STI/36
EN 14868:2005
Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems£60.80 members£64.00 non-members
ISE/NFE/8
EN 14873:-
Furniture removal activities. Storage of furniture and personal effects for private individuals
EN 14873-2:2005Provision of the service
£49.40 members£52.00 non-members
TW/2
EN 14880:2005
Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method£49.40 members£52.00 non-members
CII/34
Page 52 of 69CEN EUROPEAN STANDARDS
EN 14881:2005
Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas-chromatographic method£49.40 members£52.00 non-members
CII/34
EN 14882:2005
Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction£49.40 members£52.00 non-members
TCI/69
EN 14888:2005
Fertilizers and liming materials. Determination of cadmium content£60.80 members£64.00 non-members
CII/37
EN 14902:2005
Ambient air quality. Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter£121.60 members£128.00 non-members
EH/2/3
CEN WORKSHOP AGREEMENTSCWA 14729:-The Intrastat system
CWA 14729-1:2005The implementation model
supersedes CWA 14729-1:2003
£53.00 members£106.00 non-members
CWA 14729-2:2005
Message implementation guideline of INSTAT/XMLsupersedes CWA 14729-2:2003
£70.00 members£140.00 non-members
CWA 14729-3:2005
Message implementation guideline of INSRES/XMLsupersedes CWA 14729-3:2003
£53.00 members£106.00 non-members
CWA 15295:2005
Description of references and data models for classificationno current standard is superseded
£80.00 members£160.00 non-members
CWA 15374
Security management system for suppliers to the secure printing industryno current standard is superseded
£32.00 members£64.00 non-members
CWA 15375:2005
Separators for marine residual fuel. Performance testing using specific test oil.no current standard is superseded
£26.00 members£52.00 non-members
CEN REPORTS
CEN/TR 15120:2005
Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading£100.70 members£106.00 non-members
AUE/18
CEN/TR 15126:2005
Characterization of sludges. Good practice to landfill of sludges and sludges treatment residues£87.40 members£92.00 non-members
EH/5
CEN/TR 15138:2005
Petroleum products and other liquids. Guide to flash point testing£49.40 members£52.00 non-members
PTI/13
CEN/TR 15139:2005
Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel£49.40 members£52.00 non-members
PTI/13
CEN/TR 15160:2005
Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests£100.70 members£106.00 non-members
PTI/13
CEN/TR 15225:2005
Guidance on factory production control for the CE marking (attestation of conformity 2+) of designed masonry mortars£49.40 members£52.00 non-members
B/519
CEN/TR 15230:2005
Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions£87.40 members£92.00 non-members
EH/2/2
CEN TECHNICAL SPECIFICATIONSCEN/TS 13149:-
Public transport. Road vehicle scheduling and control systems
CEN/TS 13149-6:2005CAN message content
£152.00 members£160.00 non-members
EPL/278
CEN/TS 15053:2005
Non-destructive testing. Recommendations for discontinuities-types in test specimens for examination£60.80 members£64.00 non-members
WEE/46
CEN/TS 15103:2005
Solid biofuels. Methods for the determination of bulk density£49.40 members£52.00 non-members
PTI/17
Page 53 of 69CEN TECHNICAL SPECIFICATIONS
CEN/TS 15104:2005
Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods£49.40 members£52.00 non-members
PTI/17
CEN/TS 15105:2005
Solid biofuels. Methods for determination of the water soluble content of chloride, sodium and potassium£49.40 members£52.00 non-members
PTI/17
CEN/TS 15111:2005
Foodstuffs. Determination of trace elements. Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)£49.40 members£52.00 non-members
AW/-/3
CEN/TS 15150:2005
Solid biofuels. Methods for the determination of particle density£49.40 members£52.00 non-members
PTI/17
CEN ISO/TS 21432:2005(ISO/TS 21432:2005)
Non-destructive testing. Standards test method for determining residual stresses by neutron diffraction
WEE/46
CENELEC PUBLICATIONS
EN 50065:-
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz
EN 50065-4-7:2005
Portable low voltage decoupling filters. Safety requirements.£114.00 members£120.00 non-members
PEL/205
EN 50085:-
Cable trunking systems and cable ducting systems for electrical installations
EN 50085-1:2005General requirements
£100.70 members£106.00 non-members
PEL/213
EN 50369:2005
Liquid tight sheathing systems for cable management£87.40 members£92.00 non-members
PEL/213
EN 50388:2005
Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability£100.70 members£106.00 non-members
GEL/9/3
EN 50395:2005
Electrical test methods for low voltage energy cables£49.40 members£52.00 non-members
GEL/20/17
EN 50396:2005
Non electrical test methods for low voltage energy cables£100.70 members£106.00 non-members
GEL/20/17
EN 50402:2005
Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems£121.60 members£128.00 non-members
GEL/31/19
EN 55016:-
Specification for radio disturbance and immunity measuring apparatus and methods
EN 55016-1:-
Radio disturbance and immunity measuring apparatus.
EN 55016-1-1:-(CISPR 16-1-1:2003/A1:2005)Measuring apparatus
AMENDMENT 1:August 2005to EN 55016-1-1:2004
GEL/210/12
EN 55016-2:-
Methods of measurement of disturbance and immunity
EN 55016-2-1:-(CISPR 16-2-1:2003/A1:2005)
Conducted disturbance measurements.AMENDMENT 1:August 2005to EN 55016-2-1:2004
GEL/210/12
EN 55016-2-2:-(CISPR 16-2-2:2003/A2:2005)Measurement of disturbance power
AMENDMENT 2:August 2005to EN 55016-2-2:2004
GEL/210/12
EN 55016-2-3:-(CISPR16-2-3:2003/A1:2005)
Radiated disturbance measurementsAMENDMENT 1:August 2005to EN 55016-2-3:2004
GEL/210/12
EN 55016-2-3:-(CISPR 16-2-3:2003/A2:2005)
Radiated disturbance measurements.AMENDMENT 2:August 2005to EN 55016-2-3:2004
GEL/210/12
EN 60335:-
Household and similar electrical appliances. Safety
EN 60335-2:-Particular requirements
EN 60335-2-15:2002(IEC 60335-2-15:2002)Appliances for heating liquids
CPL/61/07
EN 60335-2-92:2005(IEC 60745-2-92:2005 MODIFIED)
Pedestrian-controlled mains-operated lawn scarifies and aerators.
CPL/61/23
Page 54 of 69CENELEC PUBLICATIONS
EN 60745:-
Hand-held motor-operated electric tools. Safety
EN 60745-2-19:2005(IEC 60745-2-19:2005 MODIFIED)Particular requirements for jointers
CPL/61/6
EN 60947:-
Low-voltage switchgear and control gear
EN 60947-3:-(IEC 60947-3:1999/A2:2005)
Switches, disconnections, swich-disconnectors and fuse-combination units.AMENDMENT 2:August 2005to EN 60947-3:1999
PEL/17/2
EN 61034:-
Measurement of smoke density of cables burning under defined conditions
EN 61034-1:2005(IEC 61034-1:2005)Test apparatus
GEL/20/18
EN 61034-2:2005(IEC 61034-2:2005)Test procedure and requirements
GEL/20/18
EN 61058:-Switches for appliances
EN 61058-2-4:2005(IEC 61058-2-4:1995+A1:2003)
Particular requirements for independently mounted switches
EPL/23
EN 61788:-Superconductivity
EN 61788-9:2005(IEC 61788-9:2005)
Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors
L/-/90
CENELEC REPORTS
CLC/TR 50448:2005
Guide to levels of competence required in laser safety£49.40 members£52.00 non-members
EPL/76
CLC/TR 50460:2005
Cable networks for television signals, sound signals and interactive services. System guidelines for analogue optical transmission systems£100.70 members£106.00 non-members
EPL/100
CENELEC TECHNICAL SPECIFICATIONSCLC/TS 50217:2005
Guide for in-situ measurements. In-situ measurements of disturbance emission£100.70 members£106.00 non-members
GEL/210/12
HARMONIZATION DOCUMENTSHD 622 S1:-
Power cables having rated voltage from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stationsAMENDMENT 2:August 2005to HD 622 S1:1996
GEL/20/16
HD 60364:-Electrical installations of buildings
HD 60364-7:-
Requirements for special installations or locations
HD 60364-7-712:2005(IEC 60364-7-712:2005)
Solar photovoltaic (PV) power supply systems
JPEL/64
HD 60364-7-715:2005(IEC 60364-7-715 MODIFIED)
Extra-low voltage lighting installations
JPEL/64
ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONSEN 301 893: August 2005(Version 1.3.1)
Broadband radio access networks (BRAN). 5 GHz high performance RLAN. Harmonized EN covering essential requirements of article 3.2 of the R&TTE directivePrice on application
TCT/101
EN 302 842:-
Electromagnetic compatibility and radio spectrum matters (ERM). VHF air-ground and air-air digital link (VDL) mode 4 radio equipment. Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment
EN 302 842-1: August 2005(Version 1.1.1)Physical layer
Price on applicationTCT/101
EN 302 842-2: August 2005(Version 1.1.1)
General description and data link layerPrice on application
TCT/101
EN 302 842-3: August 2005(Version 1.1.1)Additional broadcast aspects
Price on applicationTCT/101
EN 302 842-4: August 2005(Version 1.1.1)Point-to-point functions
Price on applicationTCT/101
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 55 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
EG 201 730:-
Access and terminals (AT). Access to the public telecommunications networks. Publication of interface specification under directive 1999/5/EC (R&TTE). Guidelines for the publication of interface specifications
EG 201 730-1: August 2005(Version 2.1.1)General and common aspects
Price on applicationTCT/101
EG 202 373: August 2005(Version 1.1.1)
Electromagnetic compatibility and radio spectrum matters (ERM). Guide to the methods of measurement of radio frequency (RF) fieldsPrice on application
TCT/101
ES 201 468: August 2005(Version 1.3.1)
Electromagnetic compatibility and radio spectrum matters (ERM). Additional electromagnetic compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applicationsPrice on application
TCT/101
ES 203 021:-
Access and terminals (AT). Harmonized basic attachment requirements for terminals for connection to analogue interfaces of the telephone networks. Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017
ES 203 021-1: August 2005(Version 2.1.1)General aspects
Price on applicationTCT/101
ES 203 021-2: August 2005(Version 2.1.1)
Basic transmission and protection of the network from harmPrice on application
TCT/101
ES 203 021-3: August 2005(Version 2.1.1)
Basic interworking with the public telephone networksPrice on application
TCT/101
ES 282 001: August 2005(Version 1.1.1)
Telecommunications and internet converged services and protocols for advanced networking (TISPAN). NGN functional architecture release 1Price on application
TCT/101
TR 101 362: June 2005(Version 8.4.0)
Digital cellular telecommunications system (phase 2+). Radio network planning aspects (3GPP TR 03.30 version 8.4.0 release 1999)Price on application
TCT/101
TR 102 397:-
Open service access (OSA). Mapping of Parlay X web services to Parlay/OSA APIs
TR 102 397-1: August 2005(Version 1.1.1)Common mapping
Price on applicationTCT/101
TR 102 397-2:-Third party call mapping
TR 102 397-2-1: August 2005(Version 1.1.1)Mapping to generic control
Price on applicationTCT/101
TR 102 397-2-2: August 2005(Version 1.1.1)Mapping to multi-party call control
Price on applicationTCT/101
TR 102 397-3:-Call notification mapping
TR 102 397-3-1: August 2005(Version 1.1.1)Mapping to generic call control
Price on applicationTCT/101
TR 102 397-3-2: August 2005(Version 1.1.1)Mapping to multi-party call control
Price on applicationTCT/101
TR 102 397-6: August 2005(Version 1.1.1)Payment mapping
Price on applicationTCT/101
TR 102 397-7: August 2005(Version 1.1.1)Account management mapping
Price on applicationTCT/101
TR 102 397-8: August 2005(Version 1.1.1)Terminal status mapping
Price on applicationTCT/101
TR 102 397-9:-Terminal location mapping
TR 102 397-9-1: August 2005(Version 1.1.1)Mapping to mobility user location
Price on applicationTCT/101
TR 102 397-9-2: August 2005(Version 1.1.1)
Mapping to mobility user location CAMELPrice on application
TCT/101
TR 102 397-10:-Call handling mapping
TR 102 397-10-1: August 2005(Version 1.1.1)
Mapping to generic call control and user interactionPrice on application
TCT/101
TR 102 397-10-2: August 2005(Version 1.1.1)
Mapping to multi-party call control and user interactionPrice on application
TCT/101
TR 102 397-11:-Audio call mapping
Page 56 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TR 102 397-11-1: August 2005(Version 1.1.1)
Mapping to generic call control and user interactionPrice on application
TCT/101
TR 102 397-11-2: August 2005(Version 1.1.1)
Mapping to multi-party call control and user interactionPrice on application
TCT/101
TR 102 397-12: August 2005(Version 1.1.1)Multimedia conference mapping
Price on applicationTCT/101
TR 102 397-14:-Presence mapping
TR 102 397-14-1: August 2005(Version 1.1.1)
Mapping to presence and availability managementPrice on application
TCT/101
TR 102 397-14-2: August 2005(Version 1.1.1)Mapping to SIP/IMS networks
Price on applicationTCT/101
TR 102 415: August 2005(Version 1.1.1)
Human factors (HF). Telecare services. Issues and recommendations for user aspectsPrice on application
TCT/101
TR 102 493: August 2005(Version 1.1.1)
Speech processing, transmission and quality aspects (STQ). Guidelines for the use of video quality algorithms for mobile applicationsPrice on application
TCT/101
TR 123 979: June 2005(Version 6.2.0)
Universal mobile telecommunications system (UMTS). 3GPP enablers for open mobile alliance (OMA) push-to-talk over cellular (PoC) services. Stage 2 (3GPP TR 23.979 version 6.2.0 release 6)Price on application
TCT/101
TR 125 922: May 2005(Version 6.1.0)
Universal mobile telecommunications system (UMTS). Radio resource management strategies (3GPP TR 25.922 version 6.1.0 release 6)Price on application
TCT/101
TR 125 993: June 2005(Version 6.10.0)
Universal mobile telecommunications system (UMTS). Typical examples of radio access bearers (RABs) and radio bearers (RBs) supported by universal terrestrial radio access (UTRA) (3GPP TR 25.993 version 6.10.0 release 6)Price on application
TCT/101
TR 143 030: June 2005(Version 4.1.0)
Digital cellular telecommunications system (phase 2+). Radio network planning aspects (3GPP TR 43.030 version 4.1.0 release 4)Price on application
TCT/101
TR 143 030: June 2005(Version 5.2.0)
Digital cellular telecommunications system (phase 2+). Radio network planning aspects (3GPP TR 43.030 version 5.2.0 release 5)Price on application
TCT/101
TR 143 030: June 2005(Version 6.1.0)
Digital cellular telecommunications system (phase 2+). Radio network planning aspects (3GPP TR 43.030 version 6.1.0 release 6)Price on application
TCT/101
TS 100 812:-
Terrestrial trunked radio (TETRA). Subscriber identity module to mobile equipment (TSIM-ME) interface
TS 100 812-2: August 2005(Version 2.4.1)
Universal integrated circuit card (UICC). Characteristics of the TSIM applicationPrice on application
TCT/101
TS 100 925: July 2005(Version 8.2.1)
Digital cellular telecommunications system (phase 2+). Voice group call service (VGCS). Stage 1 (3GPP TS 02.68 version 8.2.1 release 1999)Price on application
TCT/101
TS 100 926: June 2005(Version 8.2.0)
Digital cellular telecommunications system (phase 2+). Voice broadcast service (VBS). Stage 1 (3GPP TS 02.69 version 8.2.0 release 1999)Price on application
TCT/101
TS 101 671: August 2005(Version 2.12.1)
Lawful interception (LI). Handover interface for the lawful interception of telecommunications trafficPrice on application
TCT/101
TS 101 709: June 2005(Version 8.6.0)
Digital cellular telecommunications system (phase 2+). Link adaptation (3GPP TS 05.09 version 8.6.0 release 1999)Price on application
TCT/101
TS 102 221: August 2005(Version 3.16.0)
Smart cards. UICC-terminal interface. Physical and logical characteristics (release 1999)Price on application
TCT/101
Page 57 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 102 221: August 2005(Version 4.14.0)
Smart cards. UICC-terminal interface. Physical and logical characteristics (release 4)Price on application
TCT/101
TS 102 221: August 2005(Version 5.8.0)
Smart cards. UICC-terminal interface. Physical and logical characteristics (release 5)Price on application
TCT/101
TS 102 221: August 2005(Version 6.9.0)
Smart cards. UICC-terminal interface. Physical and logical characteristics (release 6)Price on application
TCT/101
TS 102 221: August 2005(Version 7.2.0)
Smart cards. UICC-terminal interface. Physical and logical characteristics (release 7)Price on application
TCT/101
TS 102 234: August 2005(Version 1.3.1)
Lawful interception (LI). Service-specific details for internet access servicesPrice on application
TCT/101
TS 102 334:-
Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Network address book on fixed network
TS 102 334-3: August 2005(Version 1.2.1)
vCard 2.1 profile for contact exchange by SMS/EMS for fixed networkPrice on application
TCT/101
TS 102 345: August 2005(Version 1.2.1)
Corporate telecommunication networks (CN). Tunnelling of QSIG over SIPPrice on application
TCT/101
TS 102 351: August 2005(Version 2.1.1)
Methods for testing and specification (MTS). Internet protocol testing (IPT). IPv6 testing. Methodology and frameworkPrice on application
TCT/101
TS 102 384: July 2005(Version 6.0.0)
Smart cards. UICC-terminal interface. Card application toolkit (CAT) conformance specification (release 6)Price on application
TCT/101
TS 102 440: August 2005(Version 1.1.1)
WS-session. Web services for application session servicesPrice on application
TCT/101
TS 123 002: June 2005(Version 6.8.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Network architecture (3GPP TS 23.002 version 6.8.0 release 6)Price on application
TCT/101
TS 123 060: June 2005(Version 6.9.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). Service description. Stage 2 (3GPP TS 23.060 version 6.9.0 release 6)Price on application
TCT/101
TS 123 107: June 2005(Version 6.3.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Quality of service (QoS) concept and architecture (3GPP TS 23.107 version 6.3.0 release 6)Price on application
TCT/101
TS 123 141: June 2005(Version 6.8.0)
Universal mobile telecommunications system (UMTS). Presence service. Architecture and functional description. Stage 2 (3GPP TS 23.141 version 6.8.0 release 6)Price on application
TCT/101
TS 123 207: June 2005(Version 6.5.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). End-to-end quality of service (QoS) concept and architecture (3GPP TS 23.207 version 6.5.0 release 6)Price on application
TCT/101
TS 123 228: June 2005(Version 6.10.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia subsystem (IMS). Stage 2 (3GPP TS 23.228 version 6.10.0 release 6)Price on application
TCT/101
TS 123 234: June 2005(Version 6.5.0)
Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. System description (3GPP TS 23.234 version 6.5.0 release 6)Price on application
TCT/101
TS 123 246: June 2005(Version 6.7.0)
Universal mobile telecommunications system (UMTS). Multimedia broadcast/multicast service (MBMS). Architecture and functional description (3GPP TS 23.246 version 6.7.0 release 6)Price on application
TCT/101
Page 58 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 123 251: June 2005(Version 6.4.0)
Universal mobile telecommunications system (UMTS). Network sharing. Architecture and functional description (3GPP TS 23.251 version 6.4.0 release 6)Price on application
TCT/101
TS 123 271: June 2005(Version 6.12.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Functional stage 2 description of location services (LCS) (3GPP TS 23.271 version 6.12.0 release 6)Price on application
TCT/101
TS 125 101: June 2005(Version 6.8.0)
Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 6.8.0 release 6)Price on application
TCT/101
TS 125 133: June 2005(Version 5.15.0)
Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 5.15.0 release 5)Price on application
TCT/101
TS 125 133: June 2005(Version 6.10.0)
Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 6.10.0 release 6)Price on application
TCT/101
TS 125 141: June 2005(Version 5.10.0)
Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 5.10.0 release 5)Price on application
TCT/101
TS 125 141: June 2005(Version 6.10.0)
Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 6.10.0 release 6)Price on application
TCT/101
TS 125 301: June 2005(Version 5.5.0)
Universal mobile telecommunications system (UMTS). Radio interface protocol architecture (3GPP TS 25.301 version 5.5.0 release 5)Price on application
TCT/101
TS 125 301: June 2005(Version 6.3.0)
Universal mobile telecommunications system (UMTS). Radio interface protocol architecture (3GPP TS 25.301 version 6.3.0 release 6)Price on application
TCT/101
TS 125 302: June 2005(Version 5.8.0)
Universal mobile telecommunications system (UMTS). Services provided by the physical layer (3GPP TS 25.302 version 5.8.0 release 5)Price on application
TCT/101
TS 125 302: June 2005(Version 6.4.0)
Universal mobile telecommunications system (UMTS). Services provided by the physical layer (3GPP TS 25.302 version 6.4.0 release 6)Price on application
TCT/101
TS 125 309: June 2005(Version 6.3.0)
Universal mobile telecommunications system (UMTS). FDD enhanced uplink. Overall description. Stage 2 (3GPP TS 25.309 version 6.3.0 release 6)Price on application
TCT/101
TS 125 321: June 2005(Version 5.11.0)
Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 5.11.0 release 5)Price on application
TCT/101
TS 125 321: June 2005(Version 6.5.0)
Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 6.5.0 release 6)Price on application
TCT/101
TS 125 322: June 2005(Version 5.11.0)
Universal mobile telecommunications system (UMTS). Radio link control (RLC) protocol specification (3GPP TS 25.322 version 5.11.0 release 5)Price on application
TCT/101
TS 125 322: June 2005(Version 6.4.0)
Universal mobile telecommunications system (UMTS). Radio link control (RLC) protocol specification (3GPP TS 25.322 version 6.4.0 release 6)Price on application
TCT/101
TS 125 323: June 2005(Version 5.4.0)
Universal mobile telecommunications system (UMTS). Packet data convergence protocol (PDCP) specification (3GPP TS 25.323 version 5.4.0 release 5)Price on application
TCT/101
Page 59 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 323: June 2005(Version 6.2.0)
Universal mobile telecommunications system (UMTS). Packet data convergence protocol (PDCP) specification (3GPP TS 25.323 version 6.2.0 release 6)Price on application
TCT/101
TS 125 324: June 2005(Version 6.3.0)
Universal mobile telecommunications system (UMTS). Broadcast/multicast control (BMC) (3GPP TS 25.324 version 6.3.0 release 6)Price on application
TCT/101
TS 125 331: June 2005(Version 5.13.0)
Universal mobile telecommunications system (UMTS). Radio resource control (RRC) protocol specification (3GPP TS 25.331 version 5.13.0 release 5)Price on application
TCT/101
TS 125 331: June 2005(Version 6.6.0)
Universal mobile telecommunications system (UMTS). Radio resource control (RRC) protocol specification (3GPP TS 25.331 version 6.6.0 release 6)Price on application
TCT/101
TS 125 346: June 2005(Version 6.5.0)
Universal mobile telecommunications system (UMTS). Introduction of multimedia broadcast/multicast service (MBMS) in the radio access network (RAN). Stage 2 (3GPP TS 25.346 version 6.5.0 release 6)Price on application
TCT/101
TS 125 423: June 2005(Version 5.14.0)
Universal mobile telecommunications system (UMTS). UTRAN Iur interface radio network subsystem application part (RNSAP) signalling (3GPP TS 25.423 version 5.14.0 release 5)Price on application
TCT/101
TS 125 423: June 2005(Version 6.6.0)
Universal mobile telecommunications system (UMTS). UTRAN Iur interface radio network subsystem application part (RNSAP) signalling (3GPP TS 25.423 version 6.6.0 release 6)Price on application
TCT/101
TS 129 060: June 2005(Version 6.9.0)
Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). GPRS tunnelling protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 6.9.0 release 6)Price on application
TCT/101
TS 129 198:-
Universal mobile telecommunications system (UMTS). Open service access (OSA) application programming interface (API)
TS 129 198-4:-Call control
TS 129 198-4-3: July 2005(Version 6.5.1)
Multi-party call control service capability feature (SCF) (3GPP TS 29.198-04-3 version 6.5.1 release 6)Price on application
TCT/101
TS 129 198-5: July 2005(Version 6.4.1)
User interaction service capability feature (SCF) (3GPP TS 29.198-05 version 6.4.1 release 6)Price on application
TCT/101
TS 129 198-13: July 2005(Version 6.3.1)
Policy management service capability feature (SCF) (3GPP TS 29.198-13 version 6.3.1 release 6)Price on application
TCT/101
TS 129 198-15: July 2005(Version 6.2.1)
Multi-media messaging (MM) service capability feature (SCF) (3GPP TS 29.198-15 version 6.2.1 release 6)Price on application
TCT/101
TS 131 121: June 2005(Version 3.13.0)
Universal mobile telecommunications system (UMTS). UICC-terminal interface. Universal subscriber identity module (USIM) application test specification (3GPP TS 31.121 version 3.13.0 release 1999)Price on application
TCT/101
TS 132 305: June 2005(Version 6.0.0)
Universal mobile telecommunications system (UMTS). Telecommunication management. Configuration management (CM). Notification integration reference point (IRP). Extensible markup language (XML) definition (3GPP TS 32.305 version 6.0.0 release 6)Price on application
TCT/101
TS 134 109: June 2005(Version 5.5.0)
Universal mobile telecommunications system (UMTS). Terminal logical test interface. Special conformance testing functions (3GPP TS 34.109 version 5.5.0 release 5)Price on application
TCT/101
TS 134 109: June 2005(Version 6.1.0)
Universal mobile telecommunications system (UMTS). Terminal logical test interface. Special conformance testing functions (3GPP TS 34.109 version 6.1.0 release 6)Price on application
TCT/101
Page 60 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 143 055: June 2005(Version 6.10.0)
Digital cellular telecommunications system (phase 2+). Dual transfer mode (DTM). Stage 2 (3GPP TS 43.055 version 6.10.0 release 6)Price on application
TCT/101
TS 143 059: June 2005(Version 6.5.0)
Digital cellular telecommunications system (phase 2+). Functional stage 2 description of location services (LCS) in GERAN (3GPP TS 43.059 version 6.5.0 release 6)Price on application
TCT/101
TS 143 064: June 2005(Version 6.7.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Overall description of the GPRS radio interface. Stage 2 (3GPP TS 43.064 version 6.7.0 release 6)Price on application
TCT/101
TS 143 129: June 2005(Version 6.3.0)
Digital cellular telecommunications system (phase 2+). Packed-switched handover for GERAN A/Gb mode. Stage 2 (3GPP TS 43.129 version 6.3.0 release 6)Price on application
TCT/101
TS 143 246: June 2005(Version 6.4.0)
Digital cellular telecommunications system (phase 2+). Multimedia broadcast/multicast service (MBMS) in the GERAN. Stage 2 (3GPP TS 43.246 version 6.4.0 release 6)Price on application
TCT/101
TS 143 318: June 2005(Version 6.2.0)
Digital cellular telecommunications system (phase 2+). Generic access to the A/Gb interface. Stage 2 (3GPP TS 43.318 version 6.2.0 release 6)Price on application
TCT/101
TS 144 006: July 2005(Version 6.1.0)
Digital cellular telecommunications system (phase 2+). Mobile station - base stations system (MS-BSS) interface data link (DL) layer specification (3GPP TS 44.006 version 6.1.0 release 6)Price on application
TCT/101
TS 144 014: July 2005(Version 6.3.0)
Digital cellular telecommunications system (phase 2+). Individual equipment type requirements and interworking. Special conformance testing functions (3GPP TS 44.014 version 6.3.0 release 6)Price on application
TCT/101
TS 144 018: July 2005(Version 6.13.0)
Digital cellular telecommunications system (phase 2+). Mobile radio interface layer 3 specification. Radio resource control (RRC) protocol (3GPP TS 44.018 version 6.13.0 release 6)Price on application
TCT/101
TS 144 031: July 2005(Version 5.13.0)
Digital cellular telecommunications system (phase 2+). Location services (LCS). Mobile station (MS) - serving mobile location centre (SMLC) radio resource LCS protocol (RRLP) (3GPP TS 44.031 version 5.13.0 release 5)Price on application
TCT/101
TS 144 031: July 2005(Version 6.8.0)
Digital cellular telecommunications system (phase 2+). Location services (LCS). Mobile station (MS) - serving mobile location centre (SMLC) radio resource LCS protocol (RRLP) (3GPP TS 44.031 version 6.8.0 release 6)Price on application
TCT/101
TS 144 060: July 2005(Version 4.21.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Mobile station (MS) - base station system (BSS) interface. Radio link control / medium access control (RLC/MAC) protocol (3GPP TS 44.060 version 4.21.0 release 4)Price on application
TCT/101
TS 144 060: July 2005(Version 5.16.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Mobile station (MS) - base station system (BSS) interface. Radio link control / medium access control (RLC/MAC) protocol (3GPP TS 44.060 version 5.16.0 release 5)Price on application
TCT/101
TS 144 060: July 2005(Version 6.13.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Mobile station (MS) - base station system (BSS) interface. Radio link control / medium access control (RLC/MAC) protocol (3GPP TS 44.060 version 6.13.0 release 6)Price on application
TCT/101
TS 144 318: July 2005(Version 6.1.0)
Digital cellular telecommunications system (phase 2+). Generic access (GA) to the A/Gb interface. Mobile GA interface layer 3 specification (3GPP TS 44.318 version 6.1.0 release 6)Price on application
TCT/101
TS 145 002: June 2005(Version 6.10.0)
Digital cellular telecommunications system (phase 2+). Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 6.10.0 release 6)Price on application
TCT/101
Page 61 of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 145 005: June 2005(Version 6.10.0)
Digital cellular telecommunications system (phase 2+). Radio transmission and reception (3GPP TS 45.005 version 6.10.0 release 6)Price on application
TCT/101
TS 145 008: June 2005(Version 5.19.0)
Digital cellular telecommunications system (phase 2+). Radio subsystem link control (3GPP TS 45.008 version 5.19.0 release 5)Price on application
TCT/101
TS 145 008: June 2005(Version 6.13.0)
Digital cellular telecommunications system (phase 2+). Radio subsystem link control (3GPP TS 45.008 version 6.13.0 release 6)Price on application
TCT/101
TS 145 009: June 2005(Version 4.3.0)
Digital cellular telecommunications system (phase 2+). Link adaptation (3GPP TS 45.009 version 4.3.0 release 4)Price on application
TCT/101
TS 145 009: June 2005(Version 5.6.0)
Digital cellular telecommunications system (phase 2+). Link adaptation (3GPP TS 45.009 version 5.6.0 release 5)Price on application
TCT/101
TS 145 009: June 2005(Version 6.2.0)
Digital cellular telecommunications system (phase 2+). Link adaptation (3GPP TS 45.009 version 6.2.0 release 6)Price on application
TCT/101
TS 148 008: July 2005(Version 6.10.0)
Digital cellular telecommunications system (phase 2+). Mobile switching centre - base station system (MSC-BSS) interface layer 3 specification (3GPP TS 48.008 version 6.10.0 release 6)Price on application
TCT/101
TS 148 016: July 2005(Version 6.4.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN) interface. Network service (3GPP TS 48.016 version 6.4.0 release 6)Price on application
TCT/101
TS 148 018: July 2005(Version 5.12.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (3GPP TS 48.018 version 5.12.0 release 5)Price on application
TCT/101
TS 148 018: July 2005(Version 6.9.0)
Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (3GPP TS 48.018 version 6.9.0 release 6)Price on application
TCT/101
TS 148 071: July 2005(Version 6.8.0)
Digital cellular telecommunications system (phase 2+). Location services (LCS). Serving mobile location centre - base station system (SMLC-BSS) interface. Layer 3 specification (3GPP TS 48.071 version 6.8.0 release 6)Price on application
TCT/101
TS 149 031: July 2005(Version 6.5.0)
Digital cellular telecommunications system (phase 2+). Location services (LCS). Base station system application part LCS extension (BSSAP-LE) (3GPP TS 49.031 version 6.5.0 release 6)Price on application
TCT/101
TS 151 010:-
Digital cellular telecommunications system (phase 2+). Mobile station (MS) conformance specification
TS 151 010-1: June 2005(Version 6.3.0)
Conformance specification (3GPP TS 51.010-1 version 6.3.0 release 6)Price on application
TCT/101
TS 151 010-2: June 2005(Version 6.3.0)
Protocol implementation conformance statement (PICS) proforma specification (3GPP TS 51.010-2 version 6.3.0 release 6)Price on application
TCT/101
TS 151 010-5: June 2005(Version 6.3.0)
Inter-radio-access-technology (RAT) (GERAN / UTRAN) interaction abstract test suite (ATS) (3GPP TS 51.010-5 version 6.3.0 release 6)Price on application
TCT/101
TS 151 026: June 2005(Version 6.1.0)
Digital cellular telecommunications system (phase 2+). GSM repeater equipment specification (3GPP TS 51.026 version 6.1.0 release 6)Price on application
TCT/101
TS 183 010: August 2005(Version 1.1.1)
Telecommunications and internet converged services and protocols for advanced networking (TISPAN). NGN signalling control protocol. Communication hold (HOLD) PSTN/ISDN simulation servicesPrice on application
TCT/101
ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP)The following ETSI documents are issued under the One-Step Approval OP20051216.<CR>Comments are welcome and should be addressed to the named contact to arrive by 11 November 2005.
Page 62 of 69ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP)
EN 300 812:-
Terrestrial trunked radio (TETRA). Subscriber identity module to mobile equipment (SIM-ME) interface
EN 300 812-3: August 2005(Version 2.3.0)
Integrated circuit (IC). Physical, logical and TSIM application characteristicsContact: Nicolas WoollardEmail: nicholas.woollard@ofcom.org.ukNote: Please order by quoting the reference 05/635089 DC (ETSI)£20.00
TCT/TTR
DRAFT ETSI STANDARDS FOR PUBLIC COMMENTThe following ETSI documents are issued under the Public Enquiry PE20051223.<CR>Comments are welcome and should be addressed to the named contact to arrive by 18 November 2005.EN 302 502: August 2005(Version 1.1.1)
Broadband radio access networks (BRAN). 5,8 GHz fixed broadband data transmitting systems. Harmonized EN covering essential requirements of article 3.2 of the R&TTE directiveContact: Kevin MylanEmail: kevin.mylan@hmgovernment.org.ukNote: Please order by quoting the reference 05/635091 DC (ETSI)£20.00
TCT/BRN
The following ETSI documents are issued under the Public Enquiry PE20051230.<CR>Comments are welcome and should be addressed to the named contact to arrive by 25 November 2005.EN 301 357:-
Electromagnetic compatibility and radio spectrum matters (ERM). Cordless audio devices in the range 25 MHz to 2 000 MHz. Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz
EN 301 357-1: August 2005(Version 1.3.1)
Technical characteristics and test methodsContact: Pete MyringEmail: pete.myring@ofcom.org.ukNote: Please order by quoting the reference 05/635093 DC (ETSI)£20.00
TCT/ERM/17
EN 301 357-2: August 2005(Version 1.3.1)
Harmonized EN under article 3.2 of the R&TTE directiveContact: Pete MyringEmail: pete.myring@ofcom.org.ukNote: Please order by quoting the reference 05/635094 DC (ETSI)£20.00
TCT/ERM/17
IEC PUBLICATIONS
IEC 60068:-Environmental testing
IEC 60068-2-30:2005(Edition 3)
Tests. Test Db: Damp heat, cyclic (12h + 12 h cycle)£43.20 members£45.00 non-members
GEL/104
IEC 60519:-Safety in electroheat installations
IEC 60519-10:2005
Particular requirements for electrical resistance trace heating systems for industrial and commercial applications£48.00 members£50.00 non-members
PEL/27
IEC 60740:-
Laminations for transformers and inductors
IEC 60740-1:2005
Mechanical and electrical characteristics£123.20 members£128.33 non-members
EPL/51
IEC 60747:-
Semiconductor devices. Discrete devices
IEC 60747-7-5:2005
Bipolar transistors for power switching applications£80.00 members£83.33 non-members
EPL/47
IEC 61196:-Coaxial communication cables
IEC 61196-1:-Electrical test methods
IEC 61196-1-102:2005
Test for insulation resistance of cable dielectric£19.20 members£20.00 non-members
EPL/46/1
IEC 61196-1-308:2005
Test for tensile strength and elongation for copper-clad metals£19.20 members£20.00 non-members
EPL/46/1
IEC 61196-1-310:2005
Test for torsion characteristics of copper-clad metals£19.20 members£20.00 non-members
EPL/46/1
IEC 61300:-
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
IEC 61300-2:-Tests
IEC 61300-2-12:2005(Edition 2)Impact
£30.40 members£31.67 non-members
GEL/86/2
IEC 61300-2-18:2005(Edition 2)
Dry heat. High temperature endurance£27.20 members£28.33 non-members
GEL/86/2
IEC 62328:-
Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers
Page 63 of 69IEC PUBLICATIONS
IEC 62328-2:2005General recording structure
£168.00 members£175.00 non-members
EPL/100
IEC 62328-3:2005
Broadcasting system specific recording structure. ISDB£123.20 members£128.33 non-members
EPL/100
IEC/PAS PUBLICATIONS
IEC/PAS 62405:2005
Real-time ethernet Vnet/IP specification£193.60 members£201.67 non-members
AMT/7
IEC/PAS 62407:2005
Real-time ethernet control automation technology (EtherCAT)£208.00 members£216.67 non-members
AMT/7
IEC/PAS 62408:2005Real-time ethernet powerlink (EPL)
£219.20 members£228.33 non-members
AMT/7
IEC/PAS 62409:2005
Real-time ethernet for plant automation (EPA)£203.20 members£211.67 non-members
AMT/7
IEC/PAS 62411:2005Real-time ethernet PROFINET IO
£254.40 members£265.00 non-members
AMT/7
IEC/PAS 62431:2005
Measurement methods for reflectivity of electromagnetic absorbers in millimetre wave frequency range£108.80 members£113.33 non-members
EPL/46/2
ISO PUBLICATIONS
ISO 37:2005(Edition 4)
Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties£78.40 members£81.67 non-members
PRI/22Will be implemented as an identical British Standard
ISO 179:-
Plastics . Determination of Charpy impact properties
ISO 179-1:-Non-instrumented impact test
AMENDMENT 1:July 2005to ISO 179-1:2000
£12.80 members£13.33 non-members
PRI/21Will be implemented as an identical British Standard
ISO 185:2005(Edition 2)Grey cast iron. Classification
£73.60 members£76.67 non-members
ISE/35Will be implemented as an identical British Standard
ISO 1920:-Testing of concrete
ISO 1920-4:2005Strength of hardened concrete
£83.20 members£86.67 non-members
B/517/1Will not be implemented as a British Standard
ISO 3033:-Oil of spearmint
ISO 3033-1:2005Native type (Mentha spicata L)
£35.20 members£36.67 non-members
AW/54Will be implemented as an identical British Standard
ISO 3033-2:2005
Chinese types (80% and 60%)(Mentha viridis L. var. crispa Benth.) redistilled oil£48.00 members£50.00 non-members
AW/54Will be implemented as an identical British Standard
ISO 3033-3:2005
Indian type (Mentha spicata L.), redistilled oil£41.60 members£43.33 non-members
AW/54Will be implemented as an identical British Standard
ISO 3033-4:2005
Scotch variety (Mentha X gracilis Sole)£35.20 members£36.67 non-members
AW/54Will be implemented as an identical British Standard
ISO/TS 3567:2005
Vacuum gauges. Calibration by direct comparison with a reference gauge£59.20 members£61.67 non-members
MCE/8Will be implemented as an identical British Standard
ISO 4254:-Agricultural machinery. Safety
ISO 4254-1:2005(Edition 3)General requirements
£91.20 members£95.00 non-members
AGE/6Will be implemented as an identical British Standard
ISO 4306:-Cranes. Vocabulary
ISO 4306-5:2005Bridge and gantry cranes
£56.00 members£58.33 non-members
MHE/3/3Will not be implemented as a British Standard
Page 64 of 69ISO PUBLICATIONS
ISO 6750:2005(Edition 3)
Earth-moving machinery. Operator's manual. Content and format£56.00 members£58.33 non-members
B/513/1Will be implemented as an identical British Standard
ISO 6753:-
Tools for pressing and moulding. Machined plates
ISO 6753-1:2005(Edition 2)Machines plates for press tools
£30.40 members£31.67 non-members
MTE/12Will be implemented as an identical British Standard
ISO 7225:2005(Edition 2)Gas cylinders. Precautionary labels
£41.60 members£43.33 non-members
PVE/3/7Will be implemented as an identical British Standard
ISO 7331:2005(Edition 3)
Ski-poles for alpine skiing. Requirements and test methods£64.00 members£66.67 non-members
SW/136Will be implemented as an identical British Standard
ISO 8267:-
Aircraft. Interface requirements for tow bar attachment requirements
ISO 8267-1:2005Main line aircraft
£35.20 members£36.67 non-members
ACE/57Will be implemented as an identical British Standard
ISO 8267-2:2005Regional aircraft
£35.20 members£36.67 non-members
ACE/57Will be implemented as an identical British Standard
ISO 8528:-
Reciprocating internal combustion engine driven alternating current generating sets
ISO 8528-5:2005(Edition 2)Generating sets
£91.20 members£95.00 non-members
MCE/14/-/8Will be implemented as an identical British Standard
ISO/IEC 8802:-
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements
ISO/IEC 8802-11:2005(Edition 2)
Wireless LAN medium access control (MAC) and physical layer (PHY) specifications£257.60 members£268.33 non-members
IST/6Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 8871:-
Elastomeric parts for parenterals and for devices for pharmaceutical use
ISO 8871-2:-Identification and characterization
AMENDMENT 1:July 2005to ISO 8871-2:2003
£12.80 members£13.33 non-members
CH/212Will not be implemented as a British Standard
ISO 8871-5:2005
Functional requirements and testing£48.00 members£50.00 non-members
CH/212Will not be implemented as a British Standard
ISO 8980:-
Ophthalmic optics. Uncut finished spectacle lenses
ISO 8980-5:2005
Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant£41.60 members£43.33 non-members
CH/172/3Will be implemented as an identical British Standard
ISO 9272:2005(Edition 2)
Rubber and rubber products. Determination of precision for test method standards.£129.60 members£135.00 non-members
PRI/20Will be implemented as an identical British Standard
ISO 9276:-
Representation of results of particle size analysis
ISO 9276-5:2005
Methods of calculations relating to particle size analyses using logarithmic normal probability distribution.£51.20 members£53.33 non-members
LBI/37Will be implemented as an identical British Standard
ISO 9300:2005(Edition 2)
Measurement of gas flow by means of critical flow Venturi nozzles£96.00 members£100.00 non-members
CPI/30/2Will be implemented as an identical British Standard
ISO 9311:-
Adhesives for thermoplastic piping systems
ISO 9311-1:2005Determination of film properties
£35.20 members£36.67 non-members
PRI/52Will be implemented as an identical British Standard
ISO/IEC 9798:-
Information technology. Security techniques. Entity authentication
Page 65 of 69ISO PUBLICATIONS
ISO/IEC 9798-6:2005
Mechanisms using manual data transfer£68.80 members£71.67 non-members
IST/33Will be implemented as an identical British Standard
ISO 9802:-Raw optical glass. Vocabulary
CORRIGENDUM 1:August 2005to ISO 9802:1996
CPW/172
ISO/IEC 9834:-
Information technology. Open systems interconnection. Procedures for operation of OSI registration authorities
ISO/IEC 9834-1:2005(Edition 2)
General procedures and top arcs of the ASN.1 object identifier tree£73.60 members£76.67 non-members
IST/6Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO/IEC 9834-8:2005
Generation and registration of universally unique identifiers (UUIDs) and their use as ASN.1 object identifier components£78.40 members£81.67 non-members
IST/6Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 9927:-Cranes. Inspections
ISO 9927-3:2005Tower cranes
£78.40 members£81.67 non-members
MHE/3Will be implemented as an identical British Standard
ISO/TS 9941:2005(Edition 2)
Milk and canned evaporated milk. Determination of tin content. Spectrometric method£35.20 members£36.67 non-members
AW/5Will not be implemented as a British Standard
ISO 10071:-
Tools for pressing. Ball-lock punches
ISO 10071-2:2005Ball-lock punches for heavy duty
£51.20 members£53.33 non-members
MTE/12Will be implemented as an identical British Standard
ISO/IEC 10179:-
Information technology. Processing languages. Document style semantics and specification language (DSSSL). Amendment 2: Extensions to multilingual and complicated document stylesAMENDMENT 2:July 2005to ISO/IEC 10179:1996
£12.80 members£13.33 non-members
IST/41Will be implemented as an identical British Standard
ISO 11114:-
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents
ISO 11114-4:2005
Test methods for selecting metallic materials resistant to hydrogen embrittlement£59.20 members£61.67 non-members
PVE/3/1Will be implemented as an identical British Standard
ISO 12468:-External exposure of roofs to fire
ISO 12468-2:2005Classification of roofs
£30.40 members£31.67 non-members
FSH/22Will be implemented as an identical British Standard
ISO 12737:2005(Edition 2)
Metallic materials. Determination of plane-strain fracture toughness£64.00 members£66.67 non-members
ISE/NFE/4/4Will be implemented as an identical British Standard
ISO 13373:-
Condition monitoring and diagnostics of machines. Vibration condition monitoring
ISO 13373-2:2005
Processing, analysis and presentation of vibration data£86.40 members£90.00 non-members
GME/21Will not be implemented as a British Standard
ISO/IEC 13818:-
Information technology. Generic coding of moving pictures and of moving pictures and associated audio information
ISO/IEC 13818-4:-
Conformance testing. Amendment 2: System target decoder modelAMENDMENT 2:July 2005to ISO/IEC 13818-4:2004
£12.80 members£13.33 non-members
IST/37
ISO 14428:2004
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Determination of expansion/shrinkage during baking£35.20 members£36.67 non-members
CII/24Will be implemented as an identical British Standard
ISO/IEC 14496:-
Information technology. Coding of audio-visual objects
ISO/IEC 14496-4:-Conformance testing
CORRIGENDUM 1:August 2005to ISO/IEC 14496-4:2004/Amd 1:2005
IST/37
Page 66 of 69ISO PUBLICATIONS
ISO 14617:-Graphical symbols for diagrams
ISO 14617-1:2005(Edition 2)General information and indexes
£112.00 members£116.67 non-members
TDW/4Will be implemented as an identical British Standard
ISO/IEC 14709:-
Information technology. Configuration of customer premises cabling (CPC) for applications
ISO/IEC 14709-2:-
Integrated services digital network (ISDN) primary rateAMENDMENT 1:July 2005to ISO/IEC 14709-2:1998
£35.20 members£36.67 non-members
TCT/7Will be implemented as an identical British Standard
ISO/IEC 14776:-
Information technology. Small computer system interface (SCSI)
ISO/IEC 14776-452:2005SCSI primary commands-2 (SPC-2)
£188.80 members£196.67 non-members
ISTIECCT/-Will not be implemented as a British Standard
ISO 14819:-
Traffic and travel information (TTI). TTI messages via traffic message coding
ISO 14819-3:2005Location referencing for ALERT-C
£91.20 members£95.00 non-members
EPL/278Will be implemented as an identical British Standard
ISO 14880:-
Optics and photonics. Microlens arrays
ISO 14880-1:-Vocabulary
CORRIGENDUM 2:August 2005to ISO 14880-1:2001
CPW/172
ISO 15310:1999
Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method£51.20 members£53.33 non-members
PRI/42Will be implemented as an identical British Standard
ISO 15676:2005
Cardiovascular implants and artificial organs. Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)£41.60 members£43.33 non-members
CH/150/2Will be implemented as an identical British Standard
ISO 15704:-
Industrial automation systems. Requirements for enterprise-reference architectures and methodologiesAMENDMENT 1:August 2005to ISO 15704:2000
£12.80 members£13.33 non-members
AMT/5Will be implemented as an identical British Standard
ISO 15927:-
Hygrothermal performance of buildings. Calculation and presentation of climatic data
ISO 15927-4:2005
Hourly data for assessing the annual energy use for heating and cooling£35.20 members£36.67 non-members
B/540Will be implemented as a related British Standard
ISO 16121:-
Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses
ISO 16121-4:2005Cabin environment
£35.20 members£36.67 non-members
AUE/12Will be implemented as an identical British Standard
ISO 16468:2005
Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements£56.00 members£58.33 non-members
ISE/6Will be implemented as an identical British Standard
ISO 17201:-
Acoustics. Noise from shooting ranges
ISO 17201-1:2005
Determination of muzzle blast by measurement£100.80 members£105.00 non-members
EH/1/3Will be implemented as an identical British Standard
ISO 17228:2005
Leather. Tests for colour fastness. Change in colour with accelerated ageing£41.60 members£43.33 non-members
TCI/69Will not be implemented as a British Standard
ISO 17864:2005
Corrosion of metals and alloys. Determination of the critical pitting temperature under potentiostatic control£56.00 members£58.33 non-members
ISE/NFE/8Will be implemented as an identical British Standard
ISO/IEC 18013:-
Information technology. Personal identification. ISO compliant driving licence
Page 67 of 69ISO PUBLICATIONS
ISO/IEC 18013-1:2005
Physical characteristics and basic data set£129.60 members£135.00 non-members
IST/17Will be implemented as an identical British Standard
ISO 18116:2005
Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis£59.20 members£61.67 non-members
CII/60Will not be implemented as a British Standard
ISO 19118:2005Geographic information. Encoding
£147.20 members£153.33 non-members
IST/36Will be implemented as an identical British Standard
ISO 19879:2005
Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections£68.80 members£71.67 non-members
MCE/18/-/4Will be implemented as an identical British Standard
ISO 19980:2005
Ophthalmic instruments. Corneal topography£78.40 members£81.67 non-members
CH/172/6Will be implemented as an identical British Standard
ISO 20401:-
Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mmCORRIGENDUM 1:August 2005to ISO 20401:2005
MCE/18/-/5
ISO 20433:2005
Leather. Tests for colour fastness. Colour fastness to crocking£35.20 members£36.67 non-members
TCI/69Will not be implemented as a British Standard
ISO 20502:2005
Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing£86.40 members£90.00 non-members
RPI/13Will not be implemented as a British Standard
ISO/TS 20836:2005
Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of thermal cyclers£56.00 members£58.33 non-members
AW/-/3Will be implemented as an identical British Standard
ISO 21007:-
Gas cylinders. Identification and marking using radio frequency identification technology
ISO 21007-1:2005
Reference architecture and terminology£51.20 members£53.33 non-members
PVE/3/7Will be implemented as an identical British Standard
ISO 21007-2:2005
Numbering schemes for radio frequency identification£100.80 members£105.00 non-members
PVE/3/7Will be implemented as an identical British Standard
ISO/TS 21432:2005
Non-destructive testing. Standard test method for determining residual stress by neutron diffraction£96.00 members£100.00 non-members
WEE/46Will be implemented as an identical British Standard
ISO 21968:2005
Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy current method£51.20 members£53.33 non-members
STI/33Will be implemented as an identical British Standard
ISO 22498:2005
Plastics. Vinyl chloride homopolymer and copolymer resins particle size determination by mechanical sieving£35.20 members£36.67 non-members
PRI/82Will be implemented as an identical British Standard
ISO 22664:2005
Space data and information transfer systems. TC (telecommand) space data link protocol£147.20 members£153.33 non-members
ACE/68/-/7Will be implemented as an identical British Standard
ISO 22666:2005
Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol£137.60 members£143.33 non-members
ACE/68/-/7Will be implemented as an identical British Standard
Page 68 of 69ISO PUBLICATIONS
ISO 22667:2005
Space data and information transfer systems. Communications operations procedure 1£129.60 members£135.00 non-members
ACE/68/-/7Will be implemented as an identical British Standard
ISO 22977:2005
Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing£41.60 members£43.33 non-members
MCE/9Will be implemented as an identical British Standard
ISO 23539:2005
Photometry. The CIE system of physical photometry£68.80 members£71.67 non-members
CPL/34/5Will be implemented as an identical British Standard
ISO/IEC TR 24746:2005
Information technology. Generic cabling for customer premises mid-span DTE power insertion.£16.00 members£16.67 non-members
ISTIECCT/-Will not be implemented as a British Standard
ISO/IEC 25000:2005
Software engineering. Software product quality requirements and evaluation (SQuaRE). Guide to SQuaRE£100.80 members£105.00 non-members
IST/15Will be implemented as an identical British Standard
ISO 25539:-
Cardiovascular implants. Endovascular devices
ISO 25539-1:-Test methods
AMENDMENT 1:July 2005to ISO 25539-1:2003
£91.20 members£95.00 non-members
CH/150/2Will be implemented as an identical British Standard
ISO/IEC 80416:-
Basic principles for graphical symbols for use on equipment
ISO/IEC 80416-4:2005
Supplementary guidelines for the adaptation of graphical symbols for use on screens and displays (icons)£68.80 members£71.67 non-members
PH/8/3Will be implemented as an identical British Standard
ISO 82045:-Document management
ISO 82045-5:2005
Application of metadata for the construction and facility management sector£51.20 members£53.33 non-members
B/555Will be implemented as an identical British Standard
Page 69 of 69ISO PUBLICATIONS
top related