indoor emergency water tempering skid · 2020. 7. 27. · indoor emergency water tempering skid...
Post on 19-Jan-2021
2 Views
Preview:
TRANSCRIPT
model 8780
Indoor Emergency Water Tempering Skid
FEATURES & BENEFITS
QUALITY CONTROLFully assembled and tested for quick placement andhook-up.
BLENDING SYSTEMSafe, fully engineered thermostatic mixing valve for mixinglarge volumes of hot and cold water guarded withanti-scald protection and full flow cold water bypass toprovide tempered water in adverse situations.
TANK SYSTEM OPTIONSTanks available: 119 Gal non-ASME (450 L), 120 Gal (454 L)ASME, or 200 Gal (757 L) ASME that will Store enough hotwater to provide a single 15 minute shower and eye/facewash use. Also available in ASME is a 318 Gal (1203 L) or400 Gal (1514 L) that stores enough hot water to providetwo 15 minute shower and eye/face wash uses before tankrecovery is required.
STEAM SYSTEMSSteam Heat Exchanger (Option No. 24): Feed forwardinstantaneous heat exchanger. Requires 15 PSIG, max.1300 lb./hr. steam supply.
EXPANDABLE/FLEXIBLE CAPABILITIESSystem can be designed to a number of variationsincluding the hot water supply, the electrical type, and theblending capabilities.
ELECTRICAL SYSTEM OPTIONSHaws provides systems at various voltage options, including480V 3ph, 600V 3ph, 208V 1ph, 208V 3ph, 240V 1ph, and240V 3ph. Electrical area rating options include OrdinaryLocation and Hazardous Location up to CL1 DIV 2 B, C, DT3.
PERFORMANCE SERIESOffering a standardized line of water tempering solutionsproviding shorter lead times, advanced compliance, costefficiencies, and customizable configuration options.
MONITORINGAdvanced Programmable Monitoring Control Systemprovides real-time digital display with alarm cycle historyand fault history. Capabilities include automatic alarmsilencing reset, customer control room synchronization,seasonal operation scheduling, and more.
OPTIONS
For more information, visit www.hawsco.com or call (888)640-4297.
SPECIFICATIONS
Model 8780 skid-mounted tempering system shall include amembrane encapsulated, fiberglass channel reinforced 5' x 5'(1.5 x 1.5 m) wooden structure with bright yellow elastomericchemically resistant waterproof coating, and protected withUV inhibitors. This single or multiple shower and/or eyewashfeeder provides an operating temperature range of 40° to100° F (4° to 37° C), and is designed to operate with anumber of tempering and electrical options. The temperedwater blending system includes an integral hot water supply,whether stored or supplied by steam, and will incorporatefail-safe features like anti-scald protection and full flow coldwater bypass. The electrical system can be easily adapted tovoltages upon request.
APPLICATIONS
Perfect for indoor facilities that may encounter dangerouschemical hazards and need a complete tempering system,and/or need a feeder to other remote booth substations orother drench systems and/or eyewash stations.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 22 July, 2020DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0105 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: UNCLASSIFIED4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 970 LBS / WET - 2200 LBS
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT
1-1/2" NPT COLD WATER INLET
ELECTRICAL
THERMOCOUPLE
75"
7" 5"
79"
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/30/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.21.31
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
AIR ELIMINATOR
TEMPERATURE & PRESSURE RELIEF VALVE
EXPANSION TANK
VACUUM BREAKER
119GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
80 1/4"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT1-1/2" NPT COLD WATER INLETELECTRICAL
THERMOCOUPLE
75"
7" 5"
VACUUM BREAKER
AIR ELIMINATOR
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
119GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/30/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.21.32
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0106 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: C1D2 GROUP B,C,&D T2D4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 970 LBS / WET - 2200 LBS
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0107 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: UNCLASSIFIED4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 970 LBS / WET - 2200 LBS
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/30/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.22.31
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
79"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT
1-1/2" NPT COLD WATER INLET
ELECTRICAL
THERMOCOUPLE
75"
7" 5"
AIR ELIMINATOR
EXPANSION TANK
VACUUM BREAKERTEMPERATURE & PRESSURE RELIEF VALVE
120GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/31/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.22.32
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0108 12/31/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: C1D2 GROUP B,C,&D T2D4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 970 LBS / WET - 2200 LBS
80 1/4"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT1-1/2" NPT COLD WATER INLETELECTRICAL
THERMOCOUPLE
75"
7" 5"
VACUUM BREAKER
AIR ELIMINATOR
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
120GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
100 3/16"
1-1/2" NPT COLD WATER INLET
JUNCTION BOX
DISCONNECT
SYSTEM DRAIN
ELECTRICAL
ELECTRICAL BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
75"
7" 5"
AIR ELIMINATOR
IMMERSION HEATER
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
VACUUM BREAKER
STORAGE TANK330GAL HOT WATER
THERMOCOUPLE
4X 7"
65"
60"
60"
4X 1"
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0109 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: UNCLASSIFIED4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 1400 LBS / WET - 4400 LBS
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/30/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.23.31
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/31/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.23.32
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0110 12/31/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: CL1 DIV2 GROUP B,C,&D T2D4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 1400 LBS / WET - 4400 LBS
100 3/16"
1-1/2" NPT COLD WATER INLET
JUNCTION BOX
DISCONNECT
SYSTEM DRAIN
ELECTRICAL
ELECTRICAL
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
75"
7" 5"
STORAGE TANK
IMMERSION HEATER
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
VACUUM BREAKER
AIR ELIMINATOR
330GAL HOT WATER
THERMOCOUPLE
4X 7"
65"
60"
60"
4X 1"
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
91"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
1-1/2" NPT COLD WATER INLET
DISCONNECTELECTRICAL
THERMOCOUPLE
75"
7" 5"
VACUUM BREAKER
AIR ELIMINATOR
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
200GAL HOT WATERSTORAGE TANK
60"
65"
4X 7"
60"
4X 1"
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0111 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: UNCLASSIFIED4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 1020 LBS / WET - 2900 LBS
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/30/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.25.31
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
91"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT
1-1/2" NPT COLD WATER INLETELECTRICAL
THERMOCOUPLE
75"
7" 5"
VACUUM BREAKER
AIR ELIMINATOR
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
200GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0112 12/31/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: CL1 DIV2 GROUP B,C,&D T2D4. MATERIAL:
PIPE - GALVANIZED SCHEDULE 40 FITTINGS - GALVANIZED CLASS 150 VALVES - BRONZE
5. ESTIMATED WEIGHT: DRY - 1020 LBS / WET - 2900 LBS
CF 01/06/16
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
INSTALLATIONOF 1
SCALE
1455 KLEPPE LANE
© 2016 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.
CUSTOMER INFO/TAG #:
SIZE
BILL OF MATERIAL
1:12
DISCLOSED IN WHOLE OR IN PART TO ANYONE
SPARKS, NEVADA 89431USA
WITHOUT THE PERMISSION OF HAWS CORPORATION.
THIRD ANGLE PROJECTION
APPROVED
1
12/31/15M.EUSTAQUIO
TEMPERING SKIDTITLE
8780.25.32
CHECKED
DRAWNAPPROVALS DATE
REV.
CPART NO.
NOTICE OF PROPRIETARY INFORMATION
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
top related