ink jet printing - university of california, san...

ftalke@ucsd.edu

Ink Jet PrintingInk Jet Printing

Frank E. TalkeSpring 2008

MAE 268

ftalke@ucsd.edu

OutlineOutline

Review of Print Technology before 1980Principles of Ink jet technology– Continuous ink jet technology– Drop on demand ink jet technology

Design of drop on demand print headDiscussion of HP papers on design and manufacturing of drop on demand print head

ftalke@ucsd.edu

Print technology in the 1970Print technology in the 1970’’ss

Impact printing – Slow– Noisy– Expensive– Not “all points addressable”

ftalke@ucsd.edu

paper

Color ribbon

Print hammer

Print typeback printing

Principle of Impact printingPrinciple of Impact printing

ftalke@ucsd.edu

Typical Impact printerTypical Impact printer

ftalke@ucsd.edu

Typical impact printerTypical impact printer

ftalke@ucsd.edu

Alternative technologies: impact free Alternative technologies: impact free printingprinting

Laser printingInkjet printing– Continuous ink jet– Drop-on-Demand inkjet

ftalke@ucsd.edu

Continuous ink jet technologyContinuous ink jet technology

continuousOnly 3 percent of drops are usedHigh drop rate Ink sump requiredInk must be cleaned

ftalke@ucsd.edu

Continuous ink jetContinuous ink jet

ftalke@ucsd.edu

““All points addressableAll points addressable”” print technologyprint technology

ftalke@ucsd.edu

Multi nozzle print headMulti nozzle print head

ftalke@ucsd.edu

Ink jet printer with multi nozzle print headInk jet printer with multi nozzle print head

ftalke@ucsd.edu

DropDrop--onon--Demand Inkjet Demand Inkjet TechnologieTechnologie

Drop-on-DemandDrop only created if drop is neededLow drop rateMulti nozzle head is needed

ftalke@ucsd.edu

DropDrop--onon--Demand drop generatorDemand drop generator

ftalke@ucsd.edu

Drop generator according to Drop generator according to StemmeStemme

ftalke@ucsd.edu

DropDrop--onon--Demand PrincipleDemand Principle

ftalke@ucsd.edu

Drop formation in DropDrop formation in Drop--onon--Demand InkjetDemand Inkjet

ftalke@ucsd.edu

Technical difficulties of drop on demand Technical difficulties of drop on demand ink jet technologyink jet technology

Formation of gas bubblesChemistry of inkSmall drop ratesFabrication of a cheap and disposable print headLeaking of ink from nozzle

ftalke@ucsd.edu

Inherent contradiction of ink jet technologyInherent contradiction of ink jet technology

Ink shall never dry in the nozzleInk shall be dry on paper instantaneously

ftalke@ucsd.edu

Schematic of inkjet print head (Schematic of inkjet print head (HeinzlHeinzl))

ftalke@ucsd.edu

PT 80 ink jet print headPT 80 ink jet print head

ftalke@ucsd.edu

Principle of thermal ink jet (HP)Principle of thermal ink jet (HP)

heat element

Nozzle plate

Gas bubble

ink

ftalke@ucsd.edu

Thermal ink jet print headThermal ink jet print head

ftalke@ucsd.edu

Typical thermal ink jet head (HP)Typical thermal ink jet head (HP)

Ink reservoircontacts

nozzles

ftalke@ucsd.edu

Typical thermal inkjet head Typical thermal inkjet head (HP, Cannon)(HP, Cannon)

ftalke@ucsd.edu

Typical color printerTypical color printer

8

ftalke@ucsd.edu

Typical ink jet printer (HP)Typical ink jet printer (HP)

ftalke@ucsd.edu

SummarySummary

Ink jet printing is interdisciplinary Thermal ink jet head is a very complicated materials/mechanics deviceLittle information on fabrication of print head is available in the open literatureIn the following, we will discuss the fabrication and materials issues of the HP print head based on publications by HP.

ftalke@ucsd.edu

ftalke@ucsd.edu

Discussion of HP papers on print head Discussion of HP papers on print head design and principles of color printingdesign and principles of color printing

Bubble jet (thermal jet)Use of semi-conductor technology for head fabricationHeating of planar resistor creates bubbles which collapseThrow away head (very important)Hp, Cannon, Lexmark, etc.Black and white and color

ftalke@ucsd.edu

HP print headHP print head

ftalke@ucsd.edu

Schematic of ink jet nozzleSchematic of ink jet nozzle

ftalke@ucsd.edu

Schematic of nozzle and resistorSchematic of nozzle and resistor

ftalke@ucsd.edu

Heater fluid interfaceHeater fluid interface

ftalke@ucsd.edu

Temperature profile in liquid/solid Temperature profile in liquid/solid interfaceinterface

ftalke@ucsd.edu

Temperature profile in heater and fluidTemperature profile in heater and fluid

ftalke@ucsd.edu

Temperature profile in thermal printerTemperature profile in thermal printer

ftalke@ucsd.edu

Pulse energy as a function of thickness of Pulse energy as a function of thickness of passivationpassivation layerlayer

ftalke@ucsd.edu

Drop ejectionDrop ejection

ftalke@ucsd.edu

Simulation of drop ejectionSimulation of drop ejection

ftalke@ucsd.edu

Typical ink jet print head (again)Typical ink jet print head (again)

ftalke@ucsd.edu

Fabrication of ink jet headFabrication of ink jet head

Nozzle plate is most critical partResistance heater and nozzle plate must be bonded and assembled with ink cartridgeDisposableRefillableLife time considerationscheap

ftalke@ucsd.edu

Fabrication stepsFabrication steps

ftalke@ucsd.edu

Resistor structureResistor structure

ftalke@ucsd.edu

Pinholes cause reliability problemsPinholes cause reliability problems

ftalke@ucsd.edu

Lifetime vs. type and thickness of Lifetime vs. type and thickness of passivationpassivation layerlayer

ftalke@ucsd.edu

PassivationPassivation micro cracksmicro cracks

ftalke@ucsd.edu

Next step: Fabrication of orifice plateNext step: Fabrication of orifice plate

ftalke@ucsd.edu

Layout of orifice plateLayout of orifice plate

ftalke@ucsd.edu

Nozzle and barrier wallNozzle and barrier wall

ftalke@ucsd.edu

Nozzle plate fabricationNozzle plate fabrication

Fabrication of nozzle plate is done by electro forming on a “mandrel “A mandrel has the inverse shape (negative) of the final nozzle plateFabrication of one mandrel (master) allows replication by electro forming of many nozzle platesPlated parts are removed and the master is re-used for repeated nozzle plate fabrication

ftalke@ucsd.edu

Mandrel fabricationMandrel fabrication

ftalke@ucsd.edu

Schematic of electroformingSchematic of electroforming

ftalke@ucsd.edu

Electroforming of orifice plateElectroforming of orifice plate

ftalke@ucsd.edu

Front view of nozzle plateFront view of nozzle plate

ftalke@ucsd.edu

Back view of orifice nozzle plateBack view of orifice nozzle plate

ftalke@ucsd.edu

Print head after assembly (again)Print head after assembly (again)

ftalke@ucsd.edu

DiscussionDiscussion

Hi tech part of printer is nozzle plateLaser can also be used for making holes for nozzleSilicon micro mechanics potentially “easy” but never commercializedPrinter does not “make money”, but the expendables like ink cartridges do.

ftalke@ucsd.edu

Color drop on demand ink jet print Color drop on demand ink jet print head design using piezoelectric head design using piezoelectric squeeze tubessqueeze tubes

(Lee, Mills, Talke, IBM Journal 1984)(Lee, Mills, Talke, IBM Journal 1984)

ftalke@ucsd.edu

DodDod discrete print head driversdiscrete print head drivers

ftalke@ucsd.edu

Drop velocity vs. pulse widthDrop velocity vs. pulse width

ftalke@ucsd.edu

DodDod discrete print head driversdiscrete print head drivers

ftalke@ucsd.edu

Design of color print head (1980)Design of color print head (1980)

ftalke@ucsd.edu

Epson Piezoelectric print Epson Piezoelectric print headhead

Planar piezoelectric elementsCommercially availableNot a bubble jet

ftalke@ucsd.edu

ftalke@ucsd.edu

ftalke@ucsd.edu

Color perceptionColor perception

Three requirements– Light source– Object with pigment– Observer

ftalke@ucsd.edu

Human eyeHuman eye

ftalke@ucsd.edu

Human eye (cont.)Human eye (cont.)

Rods -- rhodopsinNight vision

ftalke@ucsd.edu

Human eye (cont.)Human eye (cont.)

Cones -- erythrolabe, chlorolabe and rhodopsinColor vision

ftalke@ucsd.edu

Perception spectrumPerception spectrum

ftalke@ucsd.edu

Color propertiesColor propertiesHue, Saturation, Lightness (Brightness) (HSB)

ftalke@ucsd.edu

Color properties (cont.)Color properties (cont.)

Red, Green, Blue (RGB)Cyan, Magenta, Yellow, Black (CMYK)

ftalke@ucsd.edu

Object with pigmentObject with pigment

Subtractive scheme primary colors

ftalke@ucsd.edu

Additive / Subtractive mixingAdditive / Subtractive mixing

Computer Monitors, TV’s -- AdditivePrinters, photographs -- Subtractive

ftalke@ucsd.edu

ftalke@ucsd.edu

ftalke@ucsd.edu

ftalke@ucsd.edu

Photo AlbumPhoto Album

by Home

ftalke@ucsd.edu

SummarySummary

Color printing has become accepted everywhereHuman eye is sensitive only to RGBAdditive primaries are complements to subtractive primariesAdvances bring high quality printing to the homeWithout mems technology, there would be no color printingTiming for technology is very important: without fast computers and high storage disks, color printing would not exist