introduction to •engineering compounds...
Post on 16-May-2018
231 Views
Preview:
TRANSCRIPT
INTRODUCTION TO•ENGINEERING COMPOUNDS
•FLAME RETARDANTS•HIGH PERFORMANCE
PRODUCTS ETP, FR, HPP
LATI NOMENCLATURE NATURAL &COLOURED
MINERALFILLED
GLASSBEADS
GLASSFIBRES
CARBONFIBRES
ELASTOMERMODIFIED
FLAMERETARDANT
High
Per
form
ance
PEEK LARPEEK a a a a b
PPS LARTON® a a a b
PPA LARAMID a a a
PPSU LAPEX R a a b
PES LAPEX A a a b
PSU LASULF® a a b
Sem
i - c
ryst
allin
es
PPh/PPc LATENE/LATENE EP® a a a a a
PA6 LATAMID® 6 a a a a a a
PA6 KELON B a a a
PA66 LATAMID® 66 a a a a a a
PA66 KELON A a a a
PAc LATAMID® 68 a a
PAc LATAMID® SP a a a a a a a
PA12 LATAMID® 12 a a a a
PBT LATER® a a a a a a a
POM LATAN a a a a a
Amor
phou
s
ABS LASTILAC® a a a a
SAN LASTIL a a
PC LATILON® a a a a
PPOm LARIL® a a a
PUR LASTANE a a
Blen
ds
ABS/PC LASTILAC® 10 a a
PBT/PC LATIBLEND a a a a
PBT/ABS LATIBLEND a a a
PA/PP LATIBLEND a a
b Intrinsically self-extinguishing
WHO IS LATI?
LATI was created in Italy in 1945.
From the year of foundation untill today, Lati has gained an absolutely prestigious position in the production of technical thermoplastic compounds.
Nowadays Lati is:
•the compounder with the largest range of technical thermoplastics in Europe;
•oneofthemostqualifiedself-extinguishing compounds suppliers in the world;
•the most important independent European produceroffit-for-usethermoplastic compounds for special applications.
The company has two plants in the North of Italy with a potential capacity of 38,000 tonnes per year.
LATI’s products are suitable for use in several industrial segments, from the automotive to fine mechanics, fromdomestic appliances to electronics.
The distribution of materials is guaranteed by its own export network.
The mission of LATI is to guarantee complete satisfaction to the customer thanks to the high technical contents of its own products and services, keepingmaximumflexibilitytowards market requirements with a constant quality level.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...................
........................................................... . . . . . . . . . . . . . . . . .. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
PROPERTIES (typical values) Latest updates on: http://lambda.lati.com
FEATURES
Physical Testing conditions Norms Units (SI)Density 23°C ISO 1183 g/cm³
Linear shrinkage at moulding * 2mm thickness - packing pressure: 60MPa
longitudinalISO 294-4 %
transversalMoisture absorption after 24h ISO 62 %
MechanicalNotched IZOD (sample 63.5 x 12.7 x 3.2 mm)
23°CASTM D256-A J/m
-20°C
Notched CHARPY (sample 80 x 10 x 4 mm)
23°CISO 179-1eA kJ/m2
-20°C
Unnotched CHARPY (sample 80 x 10 x 4 mm)
23°CISO 179-1eU kJ/m2
-20°C
Tensile elastic modulus(speed 1 mm/min)
23°C
ISO R 527 (1) MPa60°C90°C120°C150°C
Tensile strength (at yield)(speed 5 mm/min)
23°C
ISO 527 (1) MPa60°C90°C120°C150°C
Tensile strength (at break)(speed 5 mm/min)
23°C
ISO 527 (1) MPa60°C90°C120°C150°C
Tensile elongation (at yield)(speed 5 mm/min)
23°C
ISO 527 (1) %60°C90°C120°C150°C
Tensile elongation (at break)(speed 5 mm/min)
23°C
ISO 527 (1) %60°C90°C120°C150°C
ThermalCoefficient of linear thermal expansion 20°C ÷ 100°C LATI x10-6/°CContinuous Use Temperature (C.U.T.) continuous 20.000h IEC 216 °CVicat - Softening point 49 N - 50°C/h ISO 306 °C
HDT – Heat Deflection Temperature0.45 MPa
ISO 75 °C1.82 MPa
ElectricalElectrical resistivity (surface) ASTM D 257 ohmCTI - Comparative Tracking Index IEC 112 V
Flammability
Flammability rating3 mm
UL 94 class1.5 mm0.75 mm
GWFI - Glow Wire Flammability Index2 mm
IEC 695-2-12 °C1 mm
GWIT - Glow Wire Ignition Test2 mm
IEC 695-2-12 °C1 mm
Processing conditionsPre-drying temperature (at least 3 hours...) °CMelt temperature °CMould Temperature °C
abcdefghijklm
Low smoke density and low toxicity indexLow thermal expansion coefficientElectrically conductiveHigh stiffnessHalogen freeRed phosphorous freePBB/PBDE freeVery good surface appearanceVery good impact resistanceVery good chemical resistanceVery high dimensional stabilityVery good thermal propertiesTribological properties
ENGINEERING THERMOPLASTICSPA 66 PA 6 PA 6 PA 6 PPOm PPOm PUR PUR SAN ABS/PC ABS/PC ABS ABS PA 12
KELONA H CEG/40
KELONB H CER/30
KELONB H CET/30
KELONB H CETG/300
LARIL13 G/20
LARIL13 G/30 LASTANE 50 LASTANE
50 G/25LASTILG/30
LASTILAC10
LASTILAC11 G/10
LASTILACRT K/10
LASTILACSP G/17
LATAMID12 CP/85
k k b b ik bi k hik
hik b
1.50 1.36 1.38 1.37 1.22 1.27 1.24 1.35 1.31 1.12 1.19 1.10 1.18 3.230.90÷1.20 1.00÷1.25 0.35÷0.60 0.35÷0.55 0.40÷0.65 0.35÷0.60 0.50÷0.70 0.25÷0.40 0.15÷0.30 0.55÷0.75 0.45÷0.65 0.25÷0.40 0.30÷0.50 0.65÷0.851.10÷1.40 1.05÷1.35 0.40÷0.65 0.45÷0.70 0.50÷0.70 0.45÷0.65 0.50÷0.70 0.35÷0.50 0.25÷0.45 0.55÷0.75 0.50÷0.70 0.50÷0.80 0.45÷0.65 0.65÷0.85
0.26 0.32 0.32 0.32 0.04 0.03 0.25 0.20 0.08 0.04 0.04 0.03 0.03 0.05
30 65 35 40 80 110 NB 650 35 650 155 50 35 35
3.5 7 3 4 6 7 NB 50 2.5 65 15 4.5 2 25 6 3 12 3
25 30 35 30 25 25 NB NB 12 250 25 10 15 1025 25 10 35 10
6600 4900 6500 8600 6300 7800 250 1000 9600 2500 3900 8300 5800 90005000 3000 4200 6300 6300 6900 8000 2200 3600 7500 53004100 1900 2200 3000 5800 6000 6000 1900 3300 6000 41003700 1600 1700 2200 4200 4300 13002600 1100 1500 1700
- - 35 25 - 60 - -60 - - 50 50 -47 - 35 25 30 3030 40 15
90 80 70 80 80 95 NB 45 80 55 60 60 75 3570 45 55 60 60 75 60 45 50 45 6045 35 40 35 45 60 25 20 23 30 3535 25 25 30 25 40 525 20 20 25
- - NB 35 - 5 - -2 - - 4 2 -
1.8 - 1.2 6 2 0.61.7 2 2
2.9 3.5 2.5 2.5 2.5 2 NB 50 2 40 2.5 0.7 2.9 0.83.5 4.5 3.8 3.2 2.5 2.2 2 45 3 0.7 3.36.5 10 8.5 7 2.5 2.2 2.5 55 6 0.7 5.58 20 18 15 4 2.8 7012 35 30 25
25 25 25 20 3 2 8 15 30 20 5 15 20125 125 125 130 120 120 95 75 115 75 75 110230 210 200 205 140 140 110 110 130 105 100 160240 200 210 215 135 140 50 165 110 110 130 105 100 150180 85 155 185 125 130 100 105 115 105 95 95
2E3225 225 600 600 250 350 500
HB HBHB HB HBHB
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 70 ÷ 80 80 ÷ 100 80 ÷ 100 70 ÷ 80 70 ÷ 80 70 ÷ 90280 ÷ 310 240 ÷ 290 240 ÷ 290 240 ÷ 290 270 ÷ 290 270 ÷ 290 200 ÷ 220 200 ÷ 220 220 ÷ 260 230 ÷ 250 240 ÷ 260 220 ÷ 260 220 ÷ 260 240 ÷ 26080 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 90 80 ÷ 90 20 ÷ 40 20 ÷ 40 50 ÷ 70 50 ÷ 70 50 ÷ 70 50 ÷ 70 50 ÷ 70 60 ÷ 80
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
ENGINEERING THERMOPLASTICSPA 12 PA 12 PA 12 PA 12 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 66
LATAMID12 H FE90
LATAMID12 H2 G/30
LATAMID12 H2 K/30
LATAMID12 G/50
LATAMID6 BH
LATAMID6 CUVHPX10
G/35LATAMID
6 E02LATAMID6 H2 G/30
LATAMID6 H2 G/35
LATAMID6 H2 G/50
LATAMID6 H2 G/55
LATAMID6 H2E04 G/30
LATAMID6 S/30
LATAMID66
bi bc bi hk ik i bi bi i hk hk
3.27 1.23 1.17 1.45 1.13 1.36 1.06 1.35 1.41 1.56 1.62 1.33 1.34 1.140.70÷0.90 0.40÷0.70 0.20÷0.40 0.40÷0.60 1.05÷1.35 0.35÷0.60 1.15÷1.45 0.30÷0.50 0.30÷0.50 0.25÷0.45 0.20÷0.45 0.25÷0.50 0.90÷1.20 1.20÷1.500.70÷0.90 0.80÷1.10 0.60÷0.90 0.80÷1.00 1.15÷1.40 0.70÷0.95 1.25÷1.50 0.60÷0.80 0.60÷0.80 0.50÷0.70 0.50÷0.70 0.55÷0.75 1.00÷1.25 1.25÷1.55
0.05 0.06 0.06 0.06 0.37 0.34 0.40 0.32 0.31 0.28 0.27 0.33 0.32 0.30
35 130 70 220 65 110 500 110 130 140 180 180 30 4535
2 15 10 18 6 9.5 100 10 10 15 15 80 3 410 8 5 6.5 3
10 70 45 100 NB 60 NB 75 75 85 85 150 25 NB80 40 NB 63 NB NB
9000 6600 15800 10500 2800 9300 2000 8800 10500 15500 17000 8300 4200 31004000 7200 6300 550 6100 450 7100 8500 12500 13700 6700 2000 19003200 6600 5100 350 4600 320 4700 5800 8500 9300 4400 1100 6502700 3900 4300 315 3600 200 3800 4600 6900 7600 3600 700 5002100 2600 3300 300 3200 150 3100 3700 5600 6200 2900 580 350100 85 155 - - - 9075 - 105 - 120 50 -60 - 80 - 95 35 -50 - 65 - 80 25 -35 - 55 - 70 20 -
35 100 140 150 85 155 NB 160 175 215 220 150 70 9575 95 110 NB 105 NB 125 130 160 165 115 45 NB60 70 90 NB 80 NB 95 100 130 135 90 35 NB50 50 80 NB 65 NB 80 90 115 120 75 25 NB35 35 55 NB 55 NB 70 80 100 105 65 20 NB6.5 3.5 3 - - - 410 - 5 - 4.6 8 -11 - 5.8 - 6.1 12 -13 - 6 - 6.8 12 -14 - 6 - 7.6 14 -
1 8 3 4.5 30 3 NB 3 3 2.5 2.5 3.5 4 3011 4.5 6.2 NB 5.5 NB 4 3.8 3 2.9 4.8 10 NB12 5 6.7 NB 6 NB 5.3 5 3.8 3.6 6.4 15 NB14 5.5 7.7 NB 6 NB 5.8 5.5 4.2 4 6.9 20 NB16 7 8.6 NB 6 NB 6.5 6 4.5 4.2 8 35 NB
20 10 4 8 80 20 75 20 15 10 10 30 35 80110 120 120 85 100 55 130 130 130 130 100 90 90160 170 170 180 200 215 175 210 215 220 220 215 205 245150 180 180 190 140 220 140 220 220 225 225 220 195 23095 175 175 185 55 200 50 200 205 215 215 205 85 80
600 600
HB V-2 V-2 HB HB V-2HB V-2 V-2 HB HBHB V-2 V-2 HB HB
70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100240 ÷ 260 210 ÷ 230 210 ÷ 230 220 ÷ 240 240 ÷ 260 240 ÷ 270 240 ÷ 260 240 ÷ 280 240 ÷ 280 240 ÷ 280 240 ÷ 280 240 ÷ 260 240 ÷ 260 260 ÷ 29060 ÷ 80 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 60 ÷ 70 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100 60 ÷ 80 70 ÷ 100 70 ÷ 90
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
ENGINEERING THERMOPLASTICSPA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66
LATAMID66 E21
LATAMID66 E21 G/15
LATAMID66 E21 G/30
LATAMID66 E21 K/30
LATAMID66 H2 G/25
LATAMID66 H2 G/30
LATAMID66 H2 G/35
LATAMID66 H2 G/50
LATAMID66 H2 G/60
LATAMID66 H2 K/20
LATAMID66 H2 K/30
LATAMID66 H2 K/40
LATAMID66 H2 K/50
ik i i bci i bi bi bi bc bcd
bcd
bcdi
1.07 1.14 1.30 1.20 1.32 1.36 1.41 1.56 1.69 1.23 1.28 1.30 1.361.30÷1.65 0.50÷0.80 0.45÷0.75 0.25÷0.45 0.40÷0.70 0.35÷0.65 0.35÷0.60 0.30÷0.60 0.25÷0.55 0.20÷0.40 0.15÷0.35 0.15÷0.35 0.10÷0.301.30÷1.60 1.00÷1.30 0.90÷1.20 0.65÷0.95 0.85÷1.15 0.75÷1.05 0.75÷1.05 0.65÷0.95 0.60÷0.90 0.65÷0.95 0.55÷0.85 0.45÷0.70 0.35÷0.55
0.33 0.31 0.30 0.30 0.28 0.27 0.27 0.25 0.24 0.28 0.27 0.26 0.25
NB 195 160 180 85 120 120 150 135 60 85 90 70210 140 100100 20 15 15 8 10 10 15 10 6 5 8 520 15 10NB 75 65 50 60 85 70 60 70 45 50 50 35NB 80 75
1500 4800 8000 20000 8900 9400 10500 16000 20800 15500 22500 25500 29000500 3400 5700 19500 8100 8500 9500 12500 15900 14000 21500 23000 27000330 2500 4100 11700 6800 7400 8300 9000 10300 10000 15000 16000 17500200 1900 3100 8200 4800 5500 6200 7500 8200 7500 10500 11000 12000180 1700 2800 6000 3600 4400 4900 5900 6300 5400 7700 8200 9500
- 95 -- 70 85- 55 70- 45 55- 35 45
NB 90 120 180 160 175 185 220 215 200 220 220 210NB 65 85 140 125 135 145 185 170 140 160 170 170NB 45 65 110 100 110 115 150 130 115 135 145 140NB 35 55 95 90 100 105 130 110 105 120 125 125NB 30 45 75 80 85 90 100 95 90 100 105 100- 3 -- 4.8 4- 6.1 5.5- 6.6 6- 6.9 6
NB 5 3.5 1.8 3.4 3.2 2.8 2.7 2 2 1.7 1.2 1NB 7.2 5 3.2 4.2 4 3.5 3 3 2.7 2.3 1.8 1.5NB 8.6 6 3.2 5.7 5.5 4.7 5 3.5 3.4 3 2.7 2.4NB 9.3 6.5 4.2 6.2 6 5.2 5.2 4.5 3.6 3.2 3 2.8NB 9.5 6.5 4.3 6.7 6.5 5.6 6 5 3.7 3.4 3.2 2.9
70 30 10 5 10 8 8 7 6 5 2 2 290 90 100 105 125 130 130 135 135 125 130 130 135195 230 245 245 255 255 255 255 245 255 255 255 255155 255 260 260 265 260 260 260 255 260 260 260 26045 230 235 250 245 240 255 255 235 250 250 255 255
5E3
HB HBHB HBHB HB HB
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100260 ÷ 290 260 ÷ 290 260 ÷ 290 260 ÷ 290 275 ÷ 300 275 ÷ 300 275 ÷ 300 280 ÷ 310 280 ÷ 310 270 ÷ 300 280 ÷ 300 280 ÷ 300 280 ÷ 31060 ÷ 80 60 ÷ 80 60 ÷ 80 60 ÷ 80 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 110 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
ENGINEERING THERMOPLASTICSPA 66 PA 66 PA 66 PA 66 PA 66 PA6.10 PA6.10 PA6.12 PA6.12 POM POM POM POM POM
LATAMID66 H2 S/30
LATAMID66 H2E21 G/13
LATAMID66 LH2 G/35
LATAMID66 VH G/30
LATAMID66 VH2 G/30
LATAMIDSP1 G/30
LATAMIDSP1 G/50
LATAMIDSP2 H2 G/35
LATAMIDSP2 H2 G/45
LATAN13
LATAN13 G/30
LATAN13 K/30
LATAN13 S/15
LATAN13 S/20
hk i j j m bc
1.39 1.20 1.41 1.36 1.37 1.31 1.07 1.33 1.43 1.41 1.59 1.50 1.48 1.530.90÷1.20 0.55÷0.85 0.35÷0.65 0.35÷0.65 0.35÷0.65 0.35÷0.65 0.30÷0.60 0.35÷0.60 0.30÷0.60 2.00÷2.30 0.45÷0.70 0.30÷0.55 1.95÷2.25 1.85÷2.150.90÷1.20 1.05÷1.35 0.75÷1.05 0.75÷1.05 0.75÷1.05 0.75÷1.05 0.65÷0.95 0.75÷1.05 0.70÷1.00 2.05÷2.25 1.10÷1.40 1.00÷1.30 1.95÷2.20 1.85÷2.10
0.27 0.31 0.27 0.27 0.27 0.25 0.23 0.24 0.22 0.12 0.08 0.08 0.11 0.10
25 120 80 90 75 135 150 110 130 65 65 35 35 30101.5 10 8 8 6 10 15 10 15 7 5 2.5 5 20.8 4 5 5 220 65 50 60 55 100 80 95 85 NB 25 15 20 4015 55 50 NB 15
4700 4600 10200 9400 10400 8800 14000 9300 11500 2200 7500 18500 3000 31002200 3700 9200 6200 6200 6200 9800 6500 8000 1300 5900 14500 2000 20001200 2100 7900 4400 5000 5300 8400 5600 6900 850 4000 10000 1200 1200800 1700 5800 3500 3800 3600 5800 3900 4800640 1500 4400 2000 3300 3000 4800 3200 4000- 100 - 55 50 45
60 70 105 40 35 3040 55 85 30 25 2530 45 7525 40 6585 100 180 145 150 165 215 145 190 50 100 120 45 4555 70 140 95 100 120 155 105 140 NB 85 100 30 3040 50 110 75 80 100 130 90 115 NB 55 65 NB NB30 45 100 65 70 85 110 75 10025 35 85 40 65 70 90 60 80- 3 - 10 8 8
10 4 4 10 8 814 7.5 5 10 9 815 8 5.516 7 5.55 4 2.5 2.4 2.5 3.2 2.5 3.6 3.3 40 3 0.9 15 1515 6.5 3.2 4 4.5 4.2 3.3 4.7 4.3 NB 4 1.1 75 7020 12 4.2 5 5 4.9 3.8 5.4 5 NB 5.8 1.2 NB NB25 12 4.6 5.1 5.5 5.4 4.2 6 5.545 10 4.9 5.4 5.5 6.1 4.8 6.8 6.2
50 30 10 8 8 8 6 8 6 90 35 10 70 6590 90 130 130 130 120 130 110 120 80 85 85 80 80225 235 255 255 255 220 220 210 210 150 150 165 150 150235 255 260 260 260 220 220 215 215 165 165 170 150 150105 230 250 250 240 200 200 200 200 115 160 160 90 95
600 600 600 600
HBHBHB
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 70 ÷ 90 70 ÷ 90 80 ÷ 100 80 ÷ 100 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90275 ÷ 300 270 ÷ 290 270 ÷ 290 270 ÷ 290 270 ÷ 290 260 ÷ 280 260 ÷ 280 250 ÷ 280 250 ÷ 280 175 ÷ 200 180 ÷ 210 180 ÷ 210 180 ÷ 210 180 ÷ 21080 ÷ 100 70 ÷ 90 70 ÷ 90 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100 70 ÷ 90 70 ÷ 90 70 ÷ 90 80 ÷ 100 80 ÷ 100 80 ÷ 100 80 ÷ 100
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
ENGINEERING THERMOPLASTICSPOM POM POM POM POM POM PPh PPh PPh PPh PPh PPh PPh PPc
LATAN13 S/30
LATAN13 E71
LATAN2
LATAN23UV
LATAN23UVE71
LATAN3 E71
LATENE22H2 MX/25
LATENE7H2W TR/40
LATENE9H TES/30
LATENEAG7H G/30
LATENEAG7H K/30
LATENEAG7H2 G/50
LATENEAG9H MI/40
LATENEEP 22UVH2
MX/25
i m m i hk k k bc b k hk
1.60 1.34 1.41 1.42 1.35 1.36 1.11 1.23 1.14 1.12 1.06 1.32 1.22 1.131.70÷2.00 2.30÷2.70 2.00÷2.30 1.95÷2.30 2.25÷2.65 2.30÷2.70 1.10÷1.40 0.90÷1.10 1.25÷1.45 0.40÷0.65 0.35÷0.50 0.35÷0.50 0.80÷1.05 1.10÷1.401.70÷1.95 2.35÷2.75 2.05÷2.25 2.00÷2.25 2.25÷2.65 2.35÷2.75 1.15÷1.45 0.85÷1.05 1.30÷1.50 0.85÷1.15 0.85÷1.15 0.60÷0.90 0.80÷1.10 1.15÷1.45
0.90 0.14 0.12 0.12 0.14 0.14 0.05 0.05 0.05 0.05 0.05 0.04 0.04 0.05
30 100 95 60 90 190 35 30 25 100 55 90 20 50
1.5 10 8 6 10 12 3.5 2 2 10 4 8 1.5 102 1 0.7 135 NB NB NB NB NB 65 20 30 65 5 25 10 10038 15 15 8
3600 1500 2600 2700 2700 1900 2600 4200 2700 6300 15000 10000 4200 25002300 900 1500 1600 1400 1100 1100 1200 4500 11000 8200 2500 10001300 500 1000 1100 800 650 650 650 3300 7900 5300 1200 500
35 35 60 60 45 35 25 25 - 25 2525 25 45 45 30 25 20 15 65 15 2020 15 30 30 20 15 10 10 40 10 10
35 35 55 50 40 35 18 25 20 80 55 105 25 NB25 NB NB NB NB NB NB 10 55 35 65 15 NBNB NB NB NB NB NB NB NB 40 25 40 5 NB
5.5 - 10 10 - - 6 4 - 2 86 - - - - - 8.5 5 2.7 3 10
6.5 - - - - - 9 6 4.2 3 -
20 100 80 40 90 115 140 3 30 3 0.9 2.5 3 NB65 NB NB NB NB NB NB 70 3.5 1.3 3.4 5 NBNB NB NB NB NB NB NB NB 6 2.3 5.8 20 NB
60 80 80 75 70 115 80 60 70 20 7 8 30 5080 65 80 80 65 70 120 75 120 120 125 125 120 110150 125 150 145 120 120 95 100 100 135 160 140 110 80150 125 160 150 120 120 105 135 125 165 160 160 125 105105 65 105 90 65 65 55 90 65 145 140 145 100 55
600 600 600 600 400
HB HB HB HB HBHB750750
80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90180 ÷ 210 175 ÷ 200 175 ÷ 200 175 ÷ 200 175 ÷ 200 175 ÷ 200 200 ÷ 240 200 ÷ 240 200 ÷ 240 200 ÷ 240 200 ÷ 240 200 ÷ 240 200 ÷ 240 200 ÷ 24080 ÷ 100 60 ÷ 90 70 ÷ 90 70 ÷ 90 60 ÷ 90 60 ÷ 90 40 ÷ 60 40 ÷ 60 40 ÷ 60 40 ÷ 60 40 ÷ 60 40 ÷ 60 40 ÷ 60 40 ÷ 60
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
ENGINEERING THERMOPLASTICSPPc PBT PBT PBT PBT PBT ABS PPh PA 6 PC PC PC PC PC
LATENEEP 7 TES/30
LATER4
LATER4 E61
LATER4 G/20
LATER4 G/30
LATER4 G/50
LATIBLEND3675 G/10
LATIBLEND5262
LATIBLEND6252 H2 G/30
LATILON28D
LATILON28D G/20
LATILON28D G/30
LATILON28D K/20
LATILON28D K/40
k hk i b b i b aik ak ak ab
cabc
1.14 1.32 1.26 1.43 1.52 1.74 1.15 0.94 1.24 1.20 1.33 1.44 1.28 1.381.15÷1.45 1.70÷2.00 1.80÷2.10 0.50÷0.75 0.30÷0.55 0.25÷0.40 0.60÷0.75 1.90÷2.20 0.45÷0.60 0.55÷0.75 0.20÷0.40 0.15÷0.35 0.10÷0.20 0.05÷0.151.20÷1.50 1.70÷2.00 1.80÷2.05 1.20÷1.50 1.00÷1.25 0.70÷0.90 0.75÷0.90 1.80÷2.10 0.90÷1.15 0.60÷0.75 0.40÷0.60 0.35÷0.55 0.20÷0.35 0.15÷0.30
0.05 0.07 0.09 0.06 0.05 0.04 0.04 0.20 0.27 0.05 0.04 0.03 0.04 0.03
40 40 140 75 85 90 70 350 110 800 100 80 85 60
2 3.5 15 7 8 7 6 30 10 10 7.5 7.5 8 50.3 10 6.5 8 8 5.5 6.830 35 NB 50 60 45 25 250 55 NB 25 30 30 1015 NB 40 55 NB 30 32
2600 2100 1900 6800 8200 15600 3100 750 9400 2400 5900 8000 12000 180001100 640 600 4500 5400 10000 6400 2100 5300 7500 11200 16800500 400 300 3300 4000 7700 4700 1800 4900 7000 10500 15600
330 180 2600 3200 5500 3100 1600 4800 6200 9400 140002000 2500 4500 2100
25 50 40 22 - 6015 - - 80 5010 - - 55 40
- - 40 3028
15 NB NB 105 110 135 50 20 125 NB 85 100 130 135NB NB NB 70 75 90 78 NB 75 85 110 115NB NB NB 55 60 70 53 NB 60 70 90 100
NB NB 40 45 55 40 NB 50 50 65 7535 40 45 27
3 4 7 6 - 65 - - 4 4.56 - - 5 3.5
- - 6 2.56.8
35 NB NB 2.7 2 1.8 2.5 150 2.7 NB 2 1.7 1.7 1.4NB NB NB 3.8 2.8 2.5 4.6 NB 1.9 1.4 1.6 1.5NB NB NB 4 3 2.5 6 NB 1.7 1.5 1.6 1.4
NB NB 4.2 3.1 3 6.7 NB 1.6 1.5 1.7 1.64.4 3.1 3 7.5
50 110 100 30 15 10 8 40 8 30 15 10 3 270 120 120 140 140 140 90 70 120 120 130 135 135 13570 195 145 210 210 220 100 70 170 135 145 145 145 145125 190 115 220 220 220 100 80 195 125 140 140 140 14550 65 55 200 200 210 90 45 160 120 135 135 135 140
150
HB HBHB HB V-1 V-1HB HB HB
80 ÷ 90 100 ÷ 120 100 ÷ 120 100 ÷ 120 100 ÷ 120 100 ÷ 120 80 ÷ 90 80 ÷ 90 80 ÷ 90 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130200 ÷ 240 230 ÷ 245 230 ÷ 245 240 ÷ 250 240 ÷ 250 240 ÷ 260 240 ÷ 260 220 ÷ 240 230 ÷ 250 270 ÷ 290 280 ÷ 300 270 ÷ 290 280 ÷ 300 280 ÷ 30040 ÷ 60 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 100 70 ÷ 80 70 ÷ 80 100 ÷ 120 100 ÷ 120 100 ÷ 120 100 ÷ 120 100 ÷ 120
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
FLAME RETARDANTPA 66 PA 66 PA 6 PA 6 PA 6 PA 6 PA 6 PPA PPA PPA PPOm PPOm PPOm PPOm SANKELON
A FR H2CETG/300-V0
KELONA FR H
CET/35-V2
KELONB FR H
CET/05-V2HF
KELONB FR H
CET/30-V0
KELONB FR H
CETG/250-V0
KELONB FR H2
CE/25-V2HF
KELONB FR H2
CEG/500-V0CT3LARAMIDD G/30-V0
LARAMIDD G/35-V0
LARAMIDD G/35-V0KB
LARIL13 G/10-V1
LARIL13 G/20-V1
LARIL13 G/30-V1
LARIL13-V1KC
LASTILG/25-V0
fg fg fg fg fg e b bfgl
bfgl bl be
fbef
bef
befk fk
1.62 1.57 1.17 1.59 1.56 1.33 1.70 1.62 1.63 1.51 1.13 1.24 1.28 1.37 1.410.45÷0.65 0.50÷0.70 0.8÷1.00 0.30÷0.55 0.30÷0.50 0.55÷0.75 0.25÷0.40 0.30÷0.60 0.30÷0.55 0.30÷0.55 0.45÷0.70 0.40÷0.65 0.35÷0.60 0.40÷0.65 0.20÷0.350.55÷0.70 0.60÷0.75 0.8÷1.00 0.35÷0.60 0.40÷0.65 0.65÷0.85 0.50÷0.65 0.70÷1.00 0.70÷1.00 0.75÷1.05 0.55÷0.75 0.50÷0.70 0.45÷0.65 0.50÷0.70 0.25÷0.40
0.26 0.27 0.35 0.30 0.32 0.32 0.27 0.20 0.20 0.20 0.04 0.04 0.03 0.03 0.08
35 35 30 35 60 30 25 70 80 90 75 75 95 35 30
1.5 3 8 2 5 3 2 6 6.5 8 10 7 7 5 51.5 2 2 4 2 6 620 25 65 15 25 30 15 40 40 45 25 25 18 15 1020 25 15 25 15 25 20
5000 9700 4000 10000 10000 5200 10500 12000 16000 12500 4000 6900 8600 5000 92002800 7600 1700 6500 7200 2200 6500 11500 15400 12000 3400 6000 7800 4500 85001700 4000 1000 3400 4500 1300 4700 11400 15200 11700 2900 5400 6600 3300 68001100 2300 600 2600 3500 750 3500 11200 15000 10900 2400 3300 4500 2600950 1700 400 2300 2600 500 2800 7500 10000 8500- - 75 - - - -
35 - - - - - -25 35 - 45 50 - -20 25 - 20 25 40 2018 20 -55 70 70 65 90 65 85 170 180 200 65 90 95 65 10035 50 NB 50 75 45 65 160 170 180 60 70 80 55 8525 35 NB 30 60 30 55 130 140 145 35 45 65 40 6020 25 NB 25 50 20 45 125 135 140 15 20 40 2018 20 NB 20 35 15 35 80 85 85- - 3.2 - - - -
4.5 - - - - - -7 5 - 2 1.5 - -10 9.5 - 2 1.5 1 1.57 15 -
2.5 1.2 5 1.5 2 2.5 1.5 1.8 1.3 2 3.5 2 1.5 2 1.26.5 2 NB 2.3 2.5 3.5 1.8 1.9 1.3 2.1 3.5 2 1.5 2 1.51 6.2 NB 5.1 6.2 6.5 2 2.1 1.5 2.2 3.8 2.2 1.8 2.2 215 12 NB 10 10 12 2.5 2.4 1.7 2.6 4.5 3 2.5 2.512 20 NB 20 15 20 2.5 3.8 3.5 4
15 30 60 25 30 35 15 8 6 6 5 3 2 5 15115 125 65 115 115 80 135 135 135 135 110 115 115 105 90235 200 160 195 190 205 210 230 230 255 130 130 135 145 115215 210 140 205 210 200 215 265 265 275 130 130 130 140 105120 155 65 155 190 120 200 230 230 255 120 120 125 135 100
300 600 600 450 500 550 350 350 425 250 250 225 250 250
V-0 V-2 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-1V-0 V-2 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-1 V-1 V-1 V-1 V-0V-0 V-2 V-2 V-2 V-0 V-2 V-1 V-0 V-0 V-0960 960 960 960 960 960 960 960 960 960 960 960960 960 960 960 960 960 960 960 960 960 960 960 960 960850 825 750 775 800 800 800775 800 750 800 800 800
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 80 ÷ 90 80 ÷ 90 80 ÷ 90 70 ÷ 90 70 ÷ 80270 ÷ 290 270 ÷ 290 230 ÷ 250 240 ÷ 260 240 ÷ 260 240 ÷ 260 250 ÷ 270 310 ÷ 330 310 ÷ 330 310 ÷ 330 260 ÷ 280 260 ÷ 280 270 ÷ 280 260 ÷ 280 190 ÷ 22070 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 80 ÷ 100 130 ÷ 160 130 ÷ 160 130 ÷ 160 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 40 ÷ 70
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
FLAME RETARDANTABS ABS ABS PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 PA 66 PA 66 PA 66 PA 66
LASTILACAR G/17-V0E
LASTILACARUV-V0
LASTILAC AR-V0E
LATAMID6 H2 G/20-V0
LATAMID6 H2 G/20-
V2HF
LATAMID6 H2 G/30-
V0AF
LATAMID6 H2 G/30-
V0CT1
LATAMID6 H2 G/30-
V0HF1
LATAMID6 H2 G/30-
V2HFLATAMID
6 H2PX-V0LATAMID6 H-V0
LATAMID66 B G/20-V
LATAMID66 B H-V0
LATAMID66 H2
G/25-V0CT1
LATAMID66 H2
G/25-V0HF1
efgk hk lf
gk g gk efhk eg ef
hk b b
1.40 1.19 1.20 1.45 1.32 1.66 1.54 1.40 1.39 1.32 1.16 1.52 1.16 1.55 1.400.30÷0.50 0.40÷0.60 0.40÷0.60 0.40÷0.65 0.65÷0.90 0.30÷0.50 0.25÷0.45 0.35÷0.55 0.35÷0.60 1.10÷1.45 1.05÷1.40 0.25÷0.45 0.80÷1.10 0.35÷0.60 0.40÷0.700.40÷0.60 0.45÷0.65 0.45÷0.65 0.55÷0.80 0.55÷0.80 0.55÷0.75 0.50÷0.70 0.65÷0.90 0.65÷0.85 1.20÷1.50 1.15÷1.45 0.70÷1.00 0.85÷1.15 0.70÷1.00 0.80÷1.15
0.03 0.04 0.04 0.33 0.33 0.31 0.30 0.31 0.32 0.38 0.37 0.28 0.30 0.25 0.27
50 75 80 50 35 100 90 110 45 55 35 40 35 80 9530 30
5 5 7 4 3 8 8 10 4 6 3 3.5 3 7 82 4 4 4 7 2.8 2.88 65 50 15 30 45 40 70 45 85 80 30 55 30 7510 35 35 15 35 25 50
4700 2400 2300 8000 5500 11000 11000 10500 7000 2700 3400 8100 3800 9200 95003900 1950 1900 6500 4200 7800 7400 7500 5500 1100 1400 5800 1800 7200 68002900 1550 1500 3600 2600 5300 5100 4600 3600 650 800 4000 1100 4800 4200
3000 2100 4300 4200 3800 3000 450 600 3200 800 3200 35002400 1700 3600 3600 3400 2500 350 500 2400 600 2200 3100
- 40 40 - - 40 60 - 80 -- 30 30 - - - - 75 - -
15 20 20 30 40 - - 60 - -25 35 - - 50 - 6020 20 - - 45 - 50
15 35 35 55 80 130 125 145 90 35 70 115 80 135 15035 20 20 40 60 90 80 95 70 25 50 75 55 95 1008 5 5 25 35 65 60 75 45 NB NB 60 NB 75 80
20 30 50 50 70 35 NB NB 50 NB 60 7510 15 40 40 60 20 NB NB 40 NB 50 65
- 3 2 - - 4 3 - 4 -- 3.2 2.1 - - - - 3 - -1 3.5 2.3 1.7 3.2 - - 4.5 - -
2 3.8 - - 4.8 - 3.52 4.5 - - 5.5 - 3.7
1.5 10 8 1 2.5 2 2 3.2 2.3 10 5 2.5 8 2.1 2.61.5 55 50 1.2 3 5 4.5 5.4 2.7 70 45 4 50 2.4 4.415 95 95 2 5 6.5 6 7.4 4.5 NB NB 5 NB 3.8 6
2.5 6.5 7.5 7 8 6 NB NB 5.3 NB 3.9 6.55 10 7.5 7 8.4 9 NB NB 6 NB 4.2 6.8
25 40 35 20 25 15 15 15 20 60 80 20 70 8 1070 65 70 85 80 95 95 100 90 65 100 90 95 115 11585 80 95 210 205 210 195 215 210 160 200 220 240 240 240100 80 85 215 190 215 215 220 210 140 185 235 240 260 25595 65 80 195 115 190 185 210 165 60 70 210 90 245 240
325 350 300 550 525 400 600 575 325 550 250 525 400 600
V-0 5VA V-0 V-0 V-2 V-0 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-0V-0 V-0 V-0 V-0 V-2 V-0 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-0V-1 V-2 V-2 V-2 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-0960 960 960 960 960 925 960 960 850 960 960 960 960 960 850960 960 960 960 960 960 960 960 850 960 960 960 960 960 960775 850 775 725 850 800 800 800 775 900 800800 725 800 725 850 800 800 800 775 900 825
70 ÷ 80 70 ÷ 80 70 ÷ 80 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100190 ÷ 230 180 ÷ 220 180 ÷ 220 240 ÷ 260 240 ÷ 260 240 ÷ 260 240 ÷ 260 240 ÷ 260 240 ÷ 260 235 ÷ 250 235 ÷ 250 260 ÷ 290 260 ÷ 290 270 ÷ 290 270 ÷ 29050 ÷ 70 40 ÷ 60 40 ÷ 60 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 90 60 ÷ 70 70 ÷ 80 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
FLAME RETARDANTPA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA 66 PA6/PA66 PPh PPh PPhLATAMID
66 H2G/25-V0KB
LATAMID66 H2
G/25-V0KB1
LATAMID66 H2
G/25-V0KB3
LATAMID66 H2
G/25-V0KB4
LATAMID66 H2
G/35-V0KB
LATAMID66 H2
G/35-V0KB1
LATAMID66 H2
G/35-V0KB3
LATAMID66 H2
G/50-V0KB1
LATAMID66
H2PX-V0
LATAMID66
H2PX-V2LATAMID66 H-V0
LATAMID68 H2-V0
LATENE7 TR-V2
LATENE7H2-V2HF
LATENE7H2W T-V0
b b i b b b bi gk gk efhk
efk k k k
1.36 1.32 1.33 1.33 1.46 1.45 1.45 1.56 1.35 1.26 1.17 1.16 0.97 1.02 1.320.35÷0.60 0.25÷0.60 0.25÷0.60 0.40÷0.70 0.40÷0.65 0.35÷0.65 0.35÷0.65 0.25÷0.55 1.10÷1.40 1.15÷1.45 1.05÷1.35 0.85÷1.10 1.35÷1.65 1.30÷1.60 0.75÷1.000.85÷1.15 0.75÷1.05 0.75÷1.00 1.05÷1.30 0.75÷1.05 0.75÷1.00 0.75÷1.00 0.65÷0.95 1.15÷1.45 1.20÷1.50 1.05÷1.40 0.60÷0.80 1.40÷1.70 1.35÷1.65 0.70÷1.00
0.27 0.27 0.27 0.27 0.26 0.26 0.26 0.25 0.31 0.32 0.30 0.32 0.05 0.07 0.05
90 80 95 120 115 105 100 130 80 55 35 35 45 40 2565 70
8 8 10 9 10 10 10 10 7 5 3 3 1.5 1.5 57 7 9 2.5 0.3 0.5 2.4
65 55 60 50 80 70 100 65 NB NB 55 90 50 40 2550 45 55 90 15 15 7.5
8800 8400 8200 6800 12500 11000 9800 13500 2800 2500 4200 4300 2200 1900 32007800 7300 6900 4700 11000 9600 8100 8500 1400 1250 2000 2000 950 850 13505400 4800 4200 2800 7700 6300 4900 7200 800 700 1200 1100 550 550 9504700 4000 3500 2300 6800 5300 3900 6000 550 500 900 8504000 3300 2700 2000 5800 4400 3100 4500 400 350 700 650
- - - 50 60 75 75 30 30 27- - 70 - - - - 20 20 20
85 70 50 - - - - 10 13 1065 50 40 - - - -55 40 35 - - - -
145 145 135 110 185 185 145 180 50 55 70 70 25 20 15115 110 100 70 145 140 110 125 40 45 50 45 NB NB 1085 80 65 50 110 105 70 100 NB NB NB NB NB NB 770 65 50 40 90 85 55 80 NB NB NB NB60 55 40 35 80 75 45 65 NB NB NB NB
- - - 2.5 4 3 3 6 8.5 2.5- - 3.5 - - - - 8 8.5 6.0
4.5 3.7 5.2 - - - - 9 9 6.54.8 3.8 5 - - - -5.5 4.1 4.8 - - - -
3 3.1 2.2 2.2 2.3 2.5 2.2 2.2 10 15 8 10 25 60 83.8 3.8 2.6 4 2.9 3.1 2.4 3.2 60 80 45 60 NB NB 125.1 5.2 4.2 6 3.8 4 3.9 3.5 NB NB NB NB NB NB 205.6 5.7 4.2 5.5 4.2 4.5 4 3.7 NB NB NB NB6 6 4.7 5 4.5 4.7 4.3 3.8 NB NB NB NB
10 10 12 12 7 7 8 4 75 80 70 80 45 65 35125 125 125 125 130 125 125 130 95 95 100 100 90 100 105250 235 240 240 255 250 240 255 175 195 240 210 100 100 75255 260 255 260 260 260 260 265 165 180 240 205 110 100 120245 235 225 220 255 255 250 245 60 55 90 95 60 60 60
400 400 600 500 450 450 600 600 250 300 600 600 600 600 600
V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-2 V-0 V-0 V-2 V-2 V-0V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-2 V-0 V-0 V-2 V-2 V-0V-0 HB HB V-0 V-0 HB V-0 V-0 V-0 V-2 V-0 V-2 V-2 V-0960 960 960 960 960 960 960 960 960 960 960 960 960 960 960960 960 960 960 960 960 960 960 960 960 960 960 960 960 960750 750 775 725 800 775 850 750 850 750750 750 800 775 800 775 850 700 850 750
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 80 ÷ 90 80 ÷ 90 80 ÷ 90270 ÷ 290 270 ÷ 290 260 ÷ 280 270 ÷ 290 270 ÷ 290 270 ÷ 290 270 ÷ 290 270 ÷ 290 270 ÷ 290 270 ÷ 290 260 ÷ 290 245 ÷ 255 180 ÷ 220 180 ÷ 210 180 ÷ 22070 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 100 70 ÷ 90 70 ÷ 90 70 ÷ 100 70 ÷ 90 20 ÷ 40 30 ÷ 50 20 ÷ 40
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
FLAME RETARDANTPPh PPh PPh PPh PPh PPc PBT PBT PBT PBT PBT PC PC PC PC
LATENE7H2W T-V0E
LATENE7H2W-V0
LATENE7-V2
LATENEAG3H2WG/30-V0
LATENEAG3H2WG/30-V0E
LATENE EP 7-V2
LATER4 E61
GCER/450-V0LATER
4 G/30-V0 LATER
4 G/30-V0CT2LATER4-V0
LATIBLEND 7587 E61-V0
LATILON28D-V0
LATILON28D G/20-V0
LATILON30D-V0
LATILON30D G/10-V0
g efk k b g k i g f bi ef
ik k aefik
aefk
1.32 1.01 0.94 1.46 1.46 0.95 1.78 1.58 1.65 1.42 1.33 1.20 1.33 1.20 1.260.75÷0.95 1.20÷1.50 1.40 ÷ 1.70 0.30÷0.50 0.40÷0.55 1.40÷1.70 0.40÷0.65 0.30÷0.50 0.30÷0.50 1.50÷1.80 1.20÷1.50 0.55÷0.75 0.20÷0.40 0.55÷0.75 0.45÷0.650.70÷0.90 1.20÷1.50 1.45 ÷ 1.75 0.75÷0.95 0.75÷1.05 1.45÷1.75 0.80÷1.10 0.95÷1.25 0.90÷1.20 1.50÷1.80 1.10÷1.40 0.60÷0.75 0.40÷0.60 0.60÷0.75 0.60÷0.75
0.05 0.07 0.07 0.05 0.05 0.07 0.07 0.05 0.05 0.07 0.06 0.05 0.04 0.05 0.04
25 20 30 50 60 110 65 100 90 50 1000 110 140 140 90
2.5 1.5 1.5 6 5 8 5 7 8.5 5 20 10 10 15 7.52.3 0.8 0.8 4.2 4 3 6 6.5 8 620 NB NB 20 20 NB 20 45 30 20 250 NB 40 NB NB6.5 20 20 18 15 100 50 35 NB NB
3500 1200 1400 8500 6700 1350 11000 10500 7800 2800 1900 2400 6500 2500 31001450 650 600 5400 4700 600 7800 7400 5400 1600 1400 2100 6000 2200 29001000 350 300 3500 3500 350 5000 4900 3400 1000 1200 1800 5700 1900 2800
3500 3600 2500 700 1000 1600 4500 1700 22002700 2600 1800 450
27 20 30 70 - 25 50 35 65 70 6017 10 15 45 45 15 40 25 60 60 5012 7 10 30 30 8 30 22 50 55 45
- 20 35 40 30-
25 NB NB 70 70 NB 95 120 80 45 30 50 95 55 4515 NB NB 45 45 NB 65 85 50 35 20 30 85 35 2510 NB NB 30 30 NB 50 65 30 20 NB 25 70 NB NB
40 50 20 NB NB 23 60 NB NB30 40 15 NB
2.3 5.5 9 2.5 - 6 3 5 5 8 45.5 5.7 10 4 2.5 9 4.5 15 4 6 36.5 5.7 11 6 4 9 9 25 3 4 2.8
- 50 2.5 2.5 2.2-
3.7 NB NB 2.5 2.5 NB 1.7 2.5 2.3 20 20 80 1.8 80 356 NB NB 5.5 4 NB 2 3.5 2.6 55 75 70 1.6 70 2810 NB NB 9.5 7 NB 2.4 5.7 2.6 90 NB NB 1.5 NB NB
2.8 6 2.7 NB NB NB 1.5 NB NB3 6 2.8 NB
45 80 70 6 20 65 20 15 15 100 3 30 15 30 25105 100 80 110 110 75 135 135 135 130 130 120 130 120 13070 100 90 120 135 70 145 200 150 140 120 140 140 140 145115 110 100 160 160 100 140 220 220 155 90 135 140 135 14065 55 55 120 135 55 140 190 200 55 75 130 135 130 130
600 600 600 600 575 600 475 250 400 250 200 200 150 200 175
5VB V-0 V-2 5VA V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0V-0 V-0 V-2 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-2 V-0 V-0 V-0V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-2 V-2 V-2960 960 960 960 960 960 960 960 960 960 960 850 960960 960 960 960 960 960 960 960 960 960 960 960
825 775 750 750 700 850825 775 775 750 700 850
80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 80 ÷ 90 100 ÷ 120 100 ÷ 120 100 ÷ 120 100 ÷ 120 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130180 ÷ 220 180 ÷ 210 180 ÷ 210 190 ÷ 220 190 ÷ 220 180 ÷ 210 240 ÷ 255 240 ÷ 250 230 ÷ 250 230 ÷ 240 250 ÷ 270 260 ÷ 290 270 ÷ 290 260 ÷ 290 270 ÷ 29020 ÷ 40 20 ÷ 40 20 ÷ 40 30 ÷ 50 30 ÷ 50 20 ÷ 40 70 ÷ 90 70 ÷ 90 70 ÷ 90 70 ÷ 90 60 ÷ 80 90 ÷ 110 100 ÷ 120 90 ÷ 110 100 ÷ 120
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
HIGH PERFORMANCE THERMOPLASTICSPES PES PES PES PPSU PPSU PPSU PPA PPA PPA PPA PPA
LAPEXA
LAPEXA G/10
LAPEXA G/20
LAPEXA G/30
LAPEXR
LAPEXR G/10
LAPEXR G/20
LARAMIDCE/60
LARAMIDG/15
LARAMIDG/30
LARAMIDG/35
LARAMIDG/45
abhkl
abhkl
abl
abl
abhijkl
abhijkl
abijl bl l bl bl bl
1.37 1.45 1.49 1.60 1.30 1.37 1.41 1.80 1.30 1.43 1.46 1.560.75÷0.95 0.40÷0.55 0.35÷0.50 0.30÷0.45 0.80÷1.00 0.45÷0.60 0.40÷0.55 0.40÷0.65 0.40÷0.70 0.30÷0.60 0.30÷0.55 0.25÷0.500.80÷0.95 0.80÷0.95 0.75÷0.90 0.60÷0.75 0.85÷1.00 0.85÷1.00 0.80÷0.95 0.45÷0.70 0.85÷1.15 0.75÷1.05 0.75÷1.05 0.70÷1.00
0.20 0.18 0.18 0.17 0.08 0.06 0.06 0.17 0.21 0.20 0.20 0.19
70 35 55 65 600 90 100 20 35 85 90 100
6.5 3.5 4 6 60 10 15 2 4 7 8 102.5 4NB 50 35 25 NB 20 25 10 20 35 55 85NB 17
2950 4600 6700 9600 2800 4000 5900 9500 7200 12000 13500 150002850 4500 6500 9400 2700 3850 5600 8700 6800 8500 10300 130002750 4400 6300 9200 2600 3700 5100 7100 5700 6000 7200 105002700 4300 6150 9000 2500 3550 4800 5300 4400 5500 6300 74002600 4100 5900 9600 2400 3400 4600 2500 2000 5000 5500 620085 - - 80 -80 - - 70 -75 - - 60 -65 - - 50 8050 75 90 40 55NB 100 115 130 NB 105 110 130 110 200 225 240NB 95 110 125 NB 100 105 115 105 150 170 185NB 90 100 115 NB 90 95 95 100 120 140 155NB 75 90 100 NB 80 85 65 75 100 115 130NB 70 80 90 NB 70 65 45 55 70 85 956.3 - - 5.3 -5.5 - - 4.6 -4.7 - - 3.8 -4 - - 3.3 3.5
3.2 3.2 2.5 2.8 10NB 3.5 2.5 2 NB 2.8 2.5 1.5 2 2.8 3 2.5NB 3.7 2.6 2.1 NB 2.6 2.2 1.7 2 3.4 3.5 3.4NB 4.1 2.7 2.3 NB 2.6 2.2 1.9 2 4.1 4.4 4.1NB 4.4 2.8 2.4 NB 2.5 2.2 3.5 5 6.8 7.3 6.8NB 20 15 2.5 NB 2.3 2.1 6.5 12 8.6 9 8.6
30 18 10 4 30 15 8 5 20 10 8 5180 180 180 185 190 190 190 135 125 130 130 135215 220 220 220 215 220 220 165 265 270 270 275210 220 220 220 215 220 220 175 295 290 280 290195 215 215 215 205 210 210 160 255 280 275 280
V-0 V-0 V-0 V-0 V-0 V-0 V-0V-0 V-0 V-0 V-0 V-0 V-0 V-0
110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 140 ÷ 160 140 ÷ 160 140 ÷ 160 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130 120 ÷ 130330 ÷ 350 330 ÷ 360 330 ÷ 360 330 ÷ 360 350 ÷ 380 350 ÷ 390 350 ÷ 390 310 ÷ 340 310 ÷ 330 310 ÷ 330 310 ÷ 330 310 ÷ 340110 ÷ 130 110 ÷ 140 110 ÷ 140 110 ÷ 140 120 ÷ 150 120 ÷ 160 120 ÷ 160 150 ÷ 170 150 ÷ 170 150 ÷ 170 150 ÷ 170 150 ÷ 170
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
HIGH PERFORMANCE THERMOPLASTICSPPA PPA PPA PPA PEEK PEEK PEEK PEEK PEEK PEEK
LARAMIDD G/40
LARAMIDD G/50
LARAMIDD GCE/650
LARAMIDD K/35
LARPEEK10
LARPEEK10 GCE/600
LARPEEK10 G/15
LARPEEK10 G/30
LARPEEK10 G/40
LARPEEK10 G/50
bil
bil
bdl
bcdl
ajklm
abjklm
ajlm
ajlm
aijlm
abjlm
1.53 1.64 1.85 1.33 1.30 1.93 1.40 1.51 1.62 1.730.30÷0.55 0.25÷0.50 0.35÷0.55 0.25÷0.45 1.25÷1.65 0.30÷0.60 0.60÷0.90 0.35÷0.65 0.30÷0.60 0.25÷0.550.60÷0.85 0.50÷0.75 0.35÷0.60 0.60÷0.85 1.40÷1.80 0.45÷0.70 1.10÷1.40 0.85÷1.15 0.75÷1.05 0.60÷0.90
0.20 0.19 0.18 0.20 0.08 0.03 0.07 0.06 0.05 0.04
120 120 50 70 NB 65 65 80 125 110
10 12 4 5 8 6 4 10 10 103
50 70 10 10 NB 40 45 65 70 55
15000 19000 22000 22000 3700 17600 6300 11500 14200 1800013600 18000 21200 21000 3700 17200 6100 11300 13900 1780012700 17000 19500 19800 3650 16900 5700 11000 13700 1750012400 15600 17200 17800 3600 16000 5500 10500 13000 170008200 13200 14000 15200 3200 15600 5100 10300 12800 16600
105 -85 -65 11055 9525 70
255 265 165 225 100 160 135 185 205 220225 235 150 200 85 145 125 170 190 210190 200 125 180 65 135 110 155 175 195165 175 105 155 55 115 90 135 150 170130 140 75 125 25 100 70 110 130 150
5 -5 -5 36 38 3.5
2.5 2 1 1 30 1.3 2.8 2.2 1.9 1.82.4 1.9 1 1 30 1.3 3.1 2.2 1.9 1.82.4 1.9 1 1.1 30 1.4 3.4 2.3 2 1.82.4 1.9 1.1 1.2 35 1.4 3.8 2.3 2 1.93.9 3.1 2.9 3.4 45 1.5 4.5 2.5 2 1.9
8 5 5 5 60 2 18 15 12 8140 140 135 135 210 250 220 230 230 240265 260 260 255 >300 >300 >300 >300 >300 >300280 280 275 275 195 >300 290 295 >300 >300265 260 260 255 165 >300 285 290 295 >300
175 200
V-0 V-0 V-0 V-0 V-0 V-0V-0 V-0 V-0 V-0 V-0 V-0V-1 V-0 V-1 V-1 V-1 V-1
960 960 960 960875 875 875 875
90 ÷ 100 90 ÷ 100 90 ÷ 100 90 ÷ 100 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150320 ÷ 340 320 ÷ 340 320 ÷ 340 320 ÷ 340 360 ÷ 390 390 ÷ 400 370 ÷ 400 370 ÷ 400 370 ÷ 400 370 ÷ 400130 ÷ 160 130 ÷ 160 130 ÷ 160 130 ÷ 160 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
HIGH PERFORMANCE THERMOPLASTICSPEEK PEEK PEEK PEEK PEEK PEEK PEEK PPS PPS PPS
LARPEEK10 G/60
LARPEEK10 K/20
LARPEEK10 K/30
LARPEEK10 K/40
LARPEEK50
LARPEEK50 G/30
LARPEEK50 K/30
LARTONCE/60
LARTONG/40
LARTONGCE/600
abdjlm
abcjlm
abcdjkl
abcdjkl
ajklm
ajlm
abcdjlm
abjl
abjl
abjkl
1.82 1.36 1.41 1.45 1.30 1.50 1.40 1.87 1.67 2.030.25÷0.50 0.25÷0.50 0.10÷0.35 0.10÷0.30 1.30÷1.70 0.40÷0.70 0.10÷0.35 0.30÷0.60 0.20÷0.35 0.10÷0.200.50÷0.75 0.55÷0.85 0.45÷0.70 0.40÷0.65 1.45÷1.85 0.90÷1.20 0.45÷0.70 0.30÷0.60 0.45÷0.65 0.15÷0.30
0.03 0.07 0.06 0.05 0.08 0.06 0.06 0.02 0.04 0.02
100 50 60 65 NB 85 65 15 85 60
10 5 5 5 8 10 6.5 2 8 5.58
50 35 40 45 NB 70 45 5 30 1528
23000 18000 24000 27000 3500 11500 21600 11500 16000 2300022700 17800 23700 26700 3500 11300 20600 9900 15500 2200022400 17600 23500 26500 3450 11000 20500 9100 15000 2080022000 17300 23100 26000 3400 10600 19000 7600 9800 1420021400 16700 22600 25500 3000 10400 15400 4200 6800 9400
9580605030
225 210 240 255 95 185 225 70 185 165215 205 235 250 80 170 200 65 170 145200 195 225 240 60 155 180 55 140 125180 185 215 230 50 135 155 35 100 105160 160 190 220 30 110 100 30 75 90
55568
1.7 1.3 1.3 1.1 30 2.2 1.5 0.5 1.3 0.81.7 1.3 1.3 1.1 30 2.2 1.7 0.8 1.3 0.91.7 1.4 1.3 1.1 30 2.2 1.7 1.2 2 11.7 1.4 1.4 1.2 35 2.3 2 1.7 2.5 1.61.8 1.4 1.4 1.2 45 2.4 2.5 1.9 2.7 2.3
6 3 2 2 50 15 1 5 6 4240 225 230 235 200 230 235 200 220 225>300 >300 >300 >300 >300 >300 >300 250 255 260>300 >300 >300 >300 190 >300 >300 240 280 285>300 >300 >300 >300 155 >300 >300 160 270 275
175 125 150
V-0 V-0 V-0 V-0 V-0 V-0V-0 V-0 V-0 V-0 V-0 V-0V-1 V-1 V-1 V-0 V-0
960 960960 960 960 960 960875 875 875
120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 120 ÷ 150 110 ÷ 130 110 ÷ 130 110 ÷ 130370 ÷ 400 370 ÷ 400 370 ÷ 400 370 ÷ 400 360 ÷ 390 370 ÷ 400 370 ÷ 400 300 ÷ 340 290 ÷ 310 300 ÷ 340170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 170 ÷ 200 130 ÷ 140 130 ÷ 140 130 ÷ 140
AF PBB/PBDE and Sb2O3 free HF Halogen freeAG Chemically coupled K Carbon fibreB High fluidity KB, KB1 Red phosphorousC High viscosity KB3 Red phosphorous, suitable for warm & humid environmentsCE, CER, CET, KC, MX, TR, T, TES Mineral filler KB4 Red phosphorous. V0 at 0.75mm thickness. Improved CTICP Special mineral filler L Oil stabilisationCT1 Improved CTI S Glass beadsCT2 PBB/PBDE. Low Sb2O3 content UV UV stabilisationCT3 Improved CTI. Halogen and red phosphorous free V Flame retardantCT4 Improved CTI. Low smoke density and low toxicity index VH Glycol and hydrolisis stabilisationE, PX Improved impact resistance V0, V1, V2 UL94-V0, V1, V2FE Magnetizable filler W Metal stabilisationG Glass fibres V0E PBB/PBDE freeH, H2, VH2 Heat stabilisation ---- UL approved
HIGH PERFORMANCE THERMOPLASTICSPPS PPS PPS PPS L-PPS L-PPS PSU PSU PSU PSU
LARTONGCE/650
LARTONGK/400
LARTONK/20
LARTONK/30
LARTONL G/40
LARTONL K/20 LASULF LASULF
G/15LASULF
G/20LASULF
G/30
abdjkl
abcdjkl
abcjkl
abcjkl
abjl
abcjkl
abhkl
abhkl
abhl
abhl
1.59 1.41 1.41 1.41 1.65 1.41 1.23 1.34 1.38 1.470.10÷0.20 0.10÷0.20 0.15÷0.50 0.10÷0.20 0.20÷0.35 0.10÷0.20 0.60÷0.90 0.20÷0.45 0.15÷0.35 0.10÷0.300.20÷0.40 0.20÷0.30 0.50÷0.85 0.15÷0.25 0.45÷0.65 0.20÷0.30 0.65÷0.95 0.65÷0.95 0.60÷0.80 0.45÷0.60
0.04 0.06 0.06 0.06 0.04 0.06 0.08 0.07 0.07 0.06
55 40 40 50 80 35 65 65 65 70
5.5 3.5 18 5 8 3 5 3.5 8 101.5 3.5
30 18 3.5 20 30 18 NB 30 30 35NB 40
22000 17000 17000 25000 17000 18000 2500 5500 6000 800019300 16000 23500 14800 15800 2300 5300 5800 770017700 15200 21000 12200 12500 2200 5200 5600 750011400 10500 15000 8400 9200 2000 5100 5500 73009000 7200 11000 7200 7500 1900 4700 5200 7000
7263554535
190 150 150 185 160 145 NB 90 110 135170 135 165 140 125 NB 80 105 130155 105 130 120 95 NB 75 95 115105 70 85 90 65 NB 65 85 10585 50 70 70 45 NB 50 70 90
5.54.54
3.52.8
1.1 1 1 0.8 1.2 1 NB 2.3 3 2.71.1 1.1 0.9 1.3 1.2 NB 2 2.6 2.51.3 1.6 1.3 1.8 1.5 NB 2 2.5 2.41.7 2 1.6 2.2 1.9 NB 1.9 2.3 2.21.8 2.3 1.8 2.5 2.1 NB 1.8 2.2 2.1
4 4 4 2 6 4 25 15 10 6225 220 220 225 200 200 150 160 160 160260 255 255 255 255 255 175 185 185 185280 280 280 280 280 280 180 185 185 190265 265 265 270 270 270 165 175 180 185
3E2150 125 125 125
V-0 V-1 V-0 V-0 V-0V-0 HB V-1 V-1 V-0V-0
960 960 960 960960 960 960 960
110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130 110 ÷ 130290 ÷ 320 290 ÷ 310 290 ÷ 310 290 ÷ 310 290 ÷ 310 290 ÷ 310 290 ÷ 320 300 ÷ 330 300 ÷ 330 300 ÷ 330130 ÷ 140 130 ÷ 140 130 ÷ 140 130 ÷ 140 130 ÷ 140 130 ÷ 140 110 ÷ 130 120 ÷ 140 120 ÷ 140 120 ÷ 140
* Values obtained according to ISO norm at the specified pressure. Actual shrinkage values may differ because of the design.Values shown are based on testing of injection moulded laboratory test specimens, conditioned according to the practice and represent data that fall within the standard range of properties for non-coloured material, if not otherwise specified. As they may be subject to variations, these values do not represent a sufficient basis for any part design and are not intended for use in establishing values for specification purposes. Properties of moulded parts can be influenced by a wide range of factors including, but not limited to, colorants, part design, processing conditions, post-treatment conditions, environmental conditions and usage of regrind during the moulding process. If data are explicitely indicated as provisional, range of properties has to be considered wider. This information and technical assistance are provided as a convenience for informational purposes only and are subject to change without notice. The customer shall always ensure that the latest release of technical information is at his own disposal. Lati S.p.A. extends no warranties or guarantee, including a warranty of merchantability of whatever use is made of the product, and make no representations as to the accuracy, suitability, reliability, completeness and sufficiency of the information provided, and assume no responsibility regarding the consequences of its use or for any printing errors. It is the customer’s responsibility to inspect and test our products in order to determine to his own satisfaction whether they are suitable for his intended uses and applications or used in conjunction with third-party materials This application-specific analysis shall
at least include preliminary testing to determine the suitability for the customer’s particular purpose from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us as the manner in which the customer use and the purpose to which utilise our products are beyond our control. Lati S.p.A. does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information. No one is authorised to make any warranties, issue any immunities or assume any liabilities on behalf of Lati S.p.A. except in a writing signed by a specifically authorised Lati S.p.A. executive. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Lati’s option, and in no event shall Lati S.p.A. be liable for special, consequential, incidental, punitive or exemplary damages. No information herein can be considered as a suggestion to use any product in conflict with intellectual property rights of third-parties. Lati S.p.A. disclaims any liability that may be claimed for infringement or alleged infringement of patents. Unless specifically stated in writing, the products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector, in contact with foodstuff or for potable water transportation. For any other issues Lati S.p.A. Conditions of Sales apply. Copyright © LATI S.p.A. 2010
LATI has been developing high technology compounds during the last 25 years.
Metal substitution, new polymers and formulations, advanced projects and engineering requirements: this huge amount of topics must be supported by an adequate know-how in order to help our Customers to implement our grades in new products.
Today LATI can offer to its Customers a fully structured service including engineering, simulation, co-design and tailor made technical courses.
Fluid-dynamical simulations: rheological description of LATI compounds are used to
evaluate the moulding process into details, predictingfillingand deformation issues.
Skilled engineers will consequently suggest mould modifications,
tips to stiffen the geometry of parts, correct moulding parameters and so on.
The whole activity is performed by using the most updated and advanced computer technology available today.
Fiber orientation prediction, cooling channel design, mould layout: every aspect of the moulding process is kept under strict control by LATI co-design engineers.
Stress analysis: metal replacement can be suitablewithoutproblemsbyrelyingonfiniteelement simulation, evaluating how plastic parts can withstand applied loads and deformations.
Also in this case a full mechanical description is achieved by LATI laboratories and then forwarded to stress analysis stations for calculation.
FEA can take into consideration any aspect
related to project requirements: temperature, environmental conditions, contact with other bodies, creep and fatigue.
The best numerical methods available on the marketused by highly skilled engineers graduated in polymer technology.
Thermal analysis: it’s the most recent development in FE simulation on polymers. Thermally conductive polymers can now be evaluated before proceeding with their implementation in new high end applications.
By means of finiteelementthermal analysis, LATI can provide a strong support in calculating, e.g., working temperature of heat sinks and coolers for electronic industry in order to promote metal to plastic substitution.
A real asset to polymer compound development.
Technical training courses: polymer specialists and Customers must share their own knowledge to be very proactive in proposing to the market new compounds and new applications.
LATI can provide in-house and on-site complete technical courses for engineers, technologists and designers in order to create a strong partnership between Supplier and Producer.
Full courses on engineering, special compounds and designing with plastics will be performed by LATI specialists, combining passion for compounds with more than 60 years of experience.
LATI: HIGH PERFORMANCE MATERIALS AND FULL TECHNICAL SUPPORT
LITERATUREContact: email: marketing@it.lati.com LATI Industria Termoplastici S.p.A. Via F. Baracca, 7 21040 - Vedano Olona (VA) - Italy Tel.: +390332409111 Fax: +390332409307
INTRODUCTION TOSPECIALS
[Vers. 003]
Special materials
LATI Special materials guide
Product range
LATI Product range
INTRODUCTION TO•ENGINEERING COMPOUNDS
•FLAME RETARDANTS•HIGH PERFORMANCE
ETP, FR, HPP materials
Engineering,flame-retardantandhigh performance engineering thermoplastics overview
LATILUBENGINEERING POLYMERS FEATURING LOW COEFFICIENT OF FRICTION AND
HIGH WEAR RESISTANCE
Latilub
Engineering polymers featuring low coefficientoffrictionandhighwearresistance
Dimensional molding shrinkage
Dimensional molding shrinkage of thermoplastic parts
· Laser Marking Techniques
· Definition of “Laser”
· Laser Beam Sources
· Characteristics of the Beam-steered Laser Systems
· Nd:YAG Laser - Marking Process Parameters
· Marking Effects
· Troubles and Poor Marking Performances
· Marking Quality and Technical Specifications
· Examples of Laser Marking Effects on Various Lati Engineering Thermoplastic Compounds
· Thermoplastic Materials Markability
LATI
THER
MO
PLA
STIC
S LA
SER
MA
RKIN
G
Laser marking
LATI Thermoplastics laser marking
Compounding Solutions
HIGHPERFORMANCETHERMOPLASTICS LATI profile
LATI Thermoplastic industries profile
Chemical resistance data
LATI chemical resistance ratings are referred to the base resins used in our compounds
Material Database http://lambda.lati.com
The airports of Milan Linate and Malpensa airport offer frequent flights, and an efficient scheduled connection. It’s possible use the railway to reach Vedano Olona.
Vedano Olona is about an hour’s drive from Milan and thirty minutes from Lugano. The highway used is the A8 (Varese - Milano) the motorway exit is Gazzada, follow the SP 57, SP 233, SP 60, following the signs LATI.
Station Vedano Olona located a few minutes walking from the LATI is about an hour’s train ride from the station of Cadorna (LeNORD) located in Milan.The races are every 30 minutes.
BY CARBY PLANE BY TRAIN
LATI Industria Termoplastici S.p.A. - Via F. Baracca, 7 - 21040 VEDANO OLONA (VA) ItalyTel. +39 - 0332 409111 - Fax +39-0332 409307 - http://www.lati.com - e-mail: marketing@it.lati.com[ ]
Copy
right
© 2
010
- LAT
I S.p
.A. -
All
right
s re
serv
ed -
Prin
ted
in It
aly
25/0
2/20
10 M
KTT0
01
top related