kps / kpsa punching-shearing machines
Post on 03-Jan-2022
3 Views
Preview:
TRANSCRIPT
1www.kaltenbach.com
If St
eel i
s You
r Dea
l!
KPS / KPSAPunching-ShearingMachines
4
The complete KALTENBACH program for pro�le and beam processing
5www.kaltenbach.com
54
High performance brings shorter turn around time. The KPS punching and
shearing system processes sheets and angular steels. Top plate and foot plate,
reinforcement ribs, gussets and many more things can be manufactured as
fast as connecting elements. The systems have various applications owing to
the 13 punching tools with 20 stencils and a stencil table with carousel
magazine. The sheet steel shaving unit processes the parts up to remainder
piece of only 20 mm!
Applications: medium to heavy steel fabrication and steel service center
The High Performer
Advantages at a glance � Capacity Range (w x h): 50 × 5 mm to 500 × 25 mm
� KPS 503: 3 punching tools and 3 dies KPS 506: 6 punching tools and 6 dies KPS 513: 13 punching tools and 20 dies
� Fast punching-shearing movement through completely re-developed, powerful hydraulic system and the shortest punch/shear path
� High �exibility with mitre cuts through zero-point o�set
� Optionally with angle processing and plasma cutting
� Machine operation via modern MULTILINE steel-construction software package
KPS 503, KPS 506, KPS 513
Powerful Punching-Shearing Machine for Plates and Angles
56
Lattice towers must safely hold their load in wind and weather over many
years. For this internal strength, they are prepared to the best by the powerful
punching-shearing plants of the KPSA series. The extremely fast and robust
systems ensure highest productivity for the manufacturers for punching and
shearing of angular steel.
Applications: electronic and communication towers, etc.
The Sturdy One
Advantages at a glance � Capacity Range (w x h): KPSA 166: 50 × 50 mm bis 160 ×160 mm KPSA 206: 50 × 50 mm bis 200 × 200 mm
� 2×3 punch tools, each with three dies
� Powerful hydraulic system
� Optionally available with drilling unit
� Machine operation via modern MULTILINE steel-construction software package
KPSA 166, KPSA 206
High Performance Punching-Shearing Machine for Angle Steel
57www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stem
sSh
otbl
ast
Syst
ems
Punc
h-/S
hear
M
achi
nes
Plat
epro
cess
ing
Cent
ers
Copi
ng/W
eldin
gRo
bots
Drill
ing
Mac
hine
sBa
nd S
awin
gM
achi
nes
Technical Data KPSA 166 KPSA 206Working range mm 160 x 160 x 15 200 x 200 x 20
working range Pro�le mm 160 x 160 x 15
Vertical punch diameter mm 5-36 5-36
Number of tools vertical punch unit Pieces 2x3 2x3
Angle shear double cut kN 750
Angle shear single cut kN 3000
Tools HSS-Tools HSS-Tools
Drilling Unit with Automatic Tool Changer (Optional)• Drilling unit with up to �ve tools attached
to the body of the vertical punching unit • Automatic tool changer• Air-cooling system for the tools, with
minimal lubrication• Drill diameters of 8 to 40 mm
Angle Shears• Double-cut shearing unit:
No deformation of the cut pieces
2 x 3 Punching Tools / 2 x 3 Dies• High quality punching and long tool life
KPSA 166KPSA 206
68
L o g i s t i c + P r o c e s s C o n t r o l
Huge potential for increasing e�ciency in steel machining
We know how: KALTENBACH Logistic + Process Control
Everything in Motion
Customer requirements
• Plate processing• Profile processing • Tube processing
• Sawing• Drilling• Stamping
Planning Logistics
Production process
• CAD/CAM-Systems• Data processing
• Transport• Storage• Handling
69www.kaltenbach.com
L o g i s t i c + P r o c e s s C o n t r o lCi
rcul
ar S
awin
gM
achi
nes
Serv
ice
Auto
mat
ion
Pain
ting
Syst
sem
sSh
otbl
ast
Syst
ems
Punc
h-/S
hear
M
achi
nes
Plat
epro
cess
ing
Cent
ers
Copi
ng/W
eldin
gRo
bots
Drill
ing
Mac
hine
sBa
nd S
awin
gM
achi
nes
The automatic production control with LPC (Logistic Process Control) systems is already widespread in the manufacturing industry. Up to now in steel machining, however, only stand-alone solutions have been implemented in steel construction and the steel trade and these only automate individual machining steps. As one of the �rst suppliers to do so, KALTENBACH has now developed the KLPC (KALTENBACH Logistic Process Control) system which fully automates all machining steps – such as sawing, drilling, �ame-cutting, coping to shotblasting and painting – as well as the transport of the work piece between the respective machining processes, and visualises them in real time.
Via the DSTV interface, the KLPC system can adopt CAD/CAM data directly from higher-level ERP systems. At the same time, it visualises and reports the processing status of each job in real time back to the ERP system. The production manager thus gains for the �rst time a complete overview of the current processes in the machining and thus optimises existing machine capacities and the utilisation of production.
With the KLPC system, KALTENBACH is heralding a new era in steel machining. On the one hand, it o�ers huge potential for increasing e�ciency with the automation and optimisation of processes.
On the other, it creates the prerequisites in the �rst place for capturing the entire machining process, visualising it and thus gaining a detailed overview of it. Every company that uses KLPC can thus draw up more comprehensive and detailed plans and generate a clear competitive advantage with this.
How the right material and
associated information reaches the right
location at the right time and how, when
and where the current process data gets
reported back?
Key issues
• Shearing• Coping• Shot Blasting
• Painting• Measuring• Transport
Production process
Logistics Construction site
• Transport• Storage• Handling
• Fastening• Mounting• Handling
Keep it Flowing !
72
Advantages at a glance � Highest accuracy and productivity
� All from one source – for highest production reliability
� Modular and future-proof system
� A variety of automation levels from semi to full automation for complete processing lines
� Heavy and robust design
There’s no production without transport equipment. Sturdy roller conveyor
systems and cross transport systems guarantee an e�cient �ow of
materials in plate and steel processing. An extensive range of measuring
equipment generates full �exibility and required dimensional accuracy.
Cross Transport by Means of Drag Chains• Material stock in heavy-duty steel
construction• Sliding rails of synthetic material
(polyamide) for low-noise material cross transport
• Drag chains with transport claws• Drive system with continuously-variable
frequency-controlled gear motor
Cross Transport by Means of Lift-and-Carry System• Hydraulic liftable and lowerable lifting
beams running in both directions
• Drive system with continuously-variable frequency-controlled gear motor
Conveyor Roller System• Modular Expandable
• Executed in welded construction with maintenance-free, ball-bearing conveyor rollers of solid material
• Roller-conveyor drive on the feed and removal sides with frequency-controlled gear motor
Fully automatic Plate Processing centre• Automatic part removal and sorting
• Flexible programmed sorting location
• The size of the sorting range can be customised
Transport & Measuring
Efficient Flow of Materials is the Basis for Ultimate Productivity
73www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stse
ms
Shot
blas
t Sy
stem
sPu
nch-
/She
ar
Mac
hine
sPl
atep
roce
ssin
g Ce
nter
sCo
ping
/Weld
ing
Robo
tsDr
illin
gM
achi
nes
Band
Saw
ing
Mac
hine
s
T13-Silencer• Contributes to enhanced occupational
safety and the protection of personnel and the environment
• Low-Noise Material Cross Transport
• Fully-automatic control
Marking System • Fast marking process for applying letters
and numerals
• Up to 22 characters without material movement
• Can be integrated into fully-automated handling processes
• Imprint still clearly visible after galvani-zing or painting
Contour Marking• Application of reference boundaries for
welding add-on pieces
• DSTV-Data import
• Use of high-speed carbide tools
• In addition to the three drill axis - marking from the bottom (4th axis)
Pusher Measuring System • Positioning drive through servo motor
with absolute rotary encoder
• Automatic NC positioning via machine software
• Hydraulic height adjustment for measu-ring various pro�le cross-sections
Length Stop Measuring System• Positioning drive through servo motor
with absolute rotary encoder
• Automatic NC positioning via machine software
• Rapid pivoting of the squaring arm
Autosorter• Process-assured full automation of the
feed side in pro�le handling
• Variable sorting positions possible
• For parts with mitre or straight cut from a length of 50 mm and up to a width of 1000 mm
74
KALTENBACH sets new standards in the area of customer service: Remote
maintenance of all equipment ensures the fastest possible repair in case of
malfunction, and therefore the highest possible equipment availability.
Our specialists can be reached via a service hotline that o�ers professional
support worldwide. A dense network of national and international service
partners in over 40 countries ensures the presence at short notice of a skilled
expert when needed. Our parts service ensures that users can get the
spare parts they need for their machines even after many years.
Advantages at a glance � Over 150 service technicians are available at more than 40 locations worldwide
� 1st level support through the local service organization
� 2nd level support through the specialists at the service helpdesk
� INITIAL ASSEMBLY: Consulting, Project planning, Organization, On-schedule, professional assembly/initial operation, Training
� Breakdown prevention through maintenance contracts (preventative maintenance)
� Worldwide express delivery of necessary replacement parts and tools
“From practical experience – to be put to practical use!“
A Service Network that is there for You – Right from the Start!
The Originals
Service
Find your local Service Partner:
www.kaltenbach.com
Originale die passen!
75www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stse
ms
Shot
blas
t Sy
stem
sPu
nch-
/She
ar
Mac
hine
sPl
atep
roce
ssin
g Ce
nter
sCo
ping
/Weld
ing
Robo
tsDr
illin
gM
achi
nes
Band
Saw
ing
Mac
hine
s
Tools for Drilling Machines Saw Blades Saw Bands
Additives and Coolant
Original KALTENBACH-Tools: Assemble and produce
Tools
+49 7621 175-241spareparts@
kaltenbach.de
Original Spare Parts forKALTENBACH/Gietart Shotblasters
To ensure a smooth production process a shotblaster should be
maintained regularly. We would be pleased to help you with this!
We can o�er you the complete package, directly from the
manufacturer:
� original spare parts
� service
� maintenance
Sparepartsfor Shotblast
Systems+31 74 2 452 260
spareparts@ kaltenbach-sps.nl
� repair
� assembly
� consultancy
Order hereAll Information on our Homepage
Robotic Coping Machines
Band Sawing and Circular Sawing
MachinesDrilling
Machines
Measuring Systems
Shotblast system
Punching/Shearing Machines
Plate Processing CentersPainting
System
Transport Systems
Robot Welding System
Kaltenbach GmbH + Co. KG PP.O. Box 17 40 D-79507 Lörrach, Germany Blasiring 4 D-79539 Lörrach, Germany
Phone: +49 (0) 7621 / 175-0 Fax: +49 (0) 7621 / 175-477
info@kaltenbach.de www.kaltenbach.com
top related