logic goats ( not-goat )
Post on 27-Oct-2014
60 Views
Preview:
DESCRIPTION
TRANSCRIPT
not-goat Instructions 1
Glue
InstructionsYou will need a craft knife or other sharp knife, a pair of scissors, some glue and a glue spreader.
The best type of glue to use is white school glue (PVA.)
Print out the parts sheets onto thin cardboard. Photocopier card is ideal. Notice that the parts pages are marked front and back. Print out a front page, flip it over, then print the back onto the same sheet. Allow the ink to dry completely before continuing.
Before cutting anything out, score along all the dotted lines and cut out any holes with a craft knife. Both these jobs are easier to do on full sheets of card.
Dashed lines are hill folds, dotted lines are valley folds. Cut along the solid lines. Grey areas show where to glue
Cutout
Dashed lines are hill folds
Dotted lines are valley folds
Black lines show where to cut.
Shaded areas show where to glue.
Logic Goats : not-goat
1 2
3
You’ll need a coin about this size
Fold over the two flaps (1-2) so that they are at ninety degrees as shown above and glue them into place.
Glue the box together as shown in the picture. (3-11)
Assemble and glue on the box stiffener. (12-13)
Glue the flaps 1&2 down. Fold round and glue the coin holder to make a little packets. This provides weight
to help the goat move
more positively.
Glue together the push button (14-19) as shown.Glue the coin holder into place in the push button.
Glue the push button into place (20). Make sure
that it moves freely.
not-goat
and-goat
not-goat
not-goat Instructions 2
5
Make sure that the alignment piece is glued into place inside the body, lining it up with the two creases. (26)
Glue the pivot into place on the inside of the body. (27)
Make the two body inners by folding them round and gluing them. (28-29)
Glue the two sides into the body carefully lining up the curved edges. (30-31)
Assemble the four legs. (32)
Glue the four legs to the body. (33)
Glue on top flap of the body end. (34)
pivot
hinge
neck
Glue together the neck (21-22)
Glue together the pivot (23) and glue on the hinge (24)
Glue the hinge to the neck (25)
4
pivot
hinge
Upside downpivot assembly
not-goat Instructions 3
6
Assemble the head and horns. (35-38)
Glue the head to the neck (39-40)
Assemble the pushrod. (41)
Use the pushrod to join the neck and the push button. (42-43)
Glue the feet to the box top (44)
Assemble and glue on the tail.
Glue down the last two flaps of the back piece. (45)
Finally, glue the ears and the eyes into place. Your not-goat is now compete!
1
0
0
1
not-goat
truth table
Logic Goats: not-goat
At the heart of the computer is the logic gate. These microscopically small devices, including the not-gate the and-gate and the or-gate are used to make the computer do its stuff.
Each logic gate has one or more inputs and an output. In the case of the not gate the output turns on only only when inputs are turned off. By wiring these gates together in complex ways devices can be made that add or multiply or play music or predict the weather.
Logic goats work in the same way; though they may not be able to play your music. The goat only nods his head when the button is NOT pressed.
not-goat
not-goat : parts 2
Box Stiffener
no
t-go
at
not-goat
www.flying-pig.co.uk© Rob Ives / Flying Pig 2007
Cut out
Cut out
4444
4444
4444
4444
3 4
9 10
13
8
6 5
7
13
12
Box
no
t-g
oat
not-goat: Sheet 1 Back
4
10 9
3
12
1 1
20
2
2
11
117 8
5 6
not-goat : parts 2
BackBack
31
Left Body Inner Right Body Inner
Coi
n H
olde
r
Push Button
30
3333
3333
28
29
16
15
20
18
17
41
42
Pus
h R
od
43
not-goat: Sheet 2 Back
29
28
14
14
16
15
1817
19
19
43
41
not-goat : parts 3
Top
38 38 37 37
35 35 36
36
39
25
22
42
21
27
24
23
Eyes
Hor
n
Hor
n
Ears
Head
Piv
ot
Nec
k
Hin
ge
Front
not-goat : parts 3
Top
38 38 37 37
35 35 36
36
39
25
22
42
21
27
24
23
Eyes
Hor
n
Hor
n
Ears
Head
Piv
ot
Nec
k
Hin
ge
Front
not-goat: Sheet 3 Front
25
24
37 37 38 38
3636
3535
40
22
23
not-goat : parts 4
Front
Bod
y
Body End
Tail
Legs
Legs
Alignment Piece
32 32
32 32
33 33
33 33
27
34
45
45
not-goat : parts 4
Front
Bod
y
Body End
Tail
Legs
Legs
Alignment Piece
32 32
32 32
33 33
33 33
27
34
45
45
not-goat: Sheet 4 Back
26
3232
3232
44444444
44444444
30
31
26
4545
34
top related