low voltage led luminaire dc 24v, cri 90 type monorail pro ... · 5/30/2018  · mrs1...

EN

Mounting DimensionsMounting Dimensions

TypeType(Linear)

TypeType(Spot)

Mounting ArrangementsMounting Arrangements

WARNING Informa�onWARNING Informa�on CAUTION Informa�onCAUTION Informa�on

InstallationInstallation

MNP1 xxK-24V-C90(-BK)MNP4 xxK-24V-C90(-BK)MNP8 xxK-24V-C90(-BK)

1.4W, 0.06A, CRI904.3W, 0.18A, CRI908.6W, 0.36A, CRI90 (xx=LED Color Temperature, yy=Beam angle)

This LED Luminaire is designed for universal usage in shop construc�ons, counters, shelves, display units, concealed ligh�ngs, and etc. Con�nuous row ligh�ngs are to be connected through flexible/direct connector and power supply cord

Low Voltage LED Luminaire DC 24V, CRI 90MonoRail Pro CRI90 and Spot

MRS1 xxK-24V-yy(-BK,-CR)MRS3 xxK-24V-yy(-BK,-WT)

1.3W, 0.06A2.6W, 0.11A

This ligh�ng is for indoor use only. Installa�on and removal must be performed a�er power supply disconnected. Installa�on shall be performed by a qualified electrician understanding the construc�on and opera�on of this ligh�ng system and the electrical requirements involved. When connec�ng, insert connectors firmly. Pay close a�en�on to the IN-Male...OUT-Female figures in ligh�ng. Meaning of crossed out wheeled dustbin: Do not dispose electrical appliances as unsorted municipal waste, use designated collec�on facili�es. Contact local government for informa�on regarding available collec�on systems. If electrical appliances are disposed in landfills, hazardous substances/materials can leak into the groundwater, and obstruct food chain, damaging your health and well being. When replacing old appliances with new ones, the retailer is legally responsible for taking back old appliance for disposal with free of charge.Do not make modifica�ons to or alter ligh�ng housing, driver enclosure or electrical components other than those required for proper installa�on.

FLEX (MNP1 xxK-24V-C90-90)

LED DRIVER(CV mode)

Fixing of the LED Luminaire takes place via moun�ng clips/adhesive. These must be fixed at the desired area with screw(s), then the LEDLuminaire can be snapped in place. Insert the end cap to the last luminaire of one ligh�ng row

Connect only to designated LED - Drivers withconstant output voltage 24VFeelux will not grant guarantee for LED Luminaires if unspecified LED drivers are used without the wri�en consent of Feelux !!

CAUTION Input connector of MNRPC must be firmly inserted in distributor.

Class of protec�on IIIDegree of protec�on IP 20

Radio-interference-suppressed

No part of this publica�on may be reproduced without the prior permission of the publishers.

1.4W

MNP1 xxK-24V-C90(-BK),MNP1 xxK-24V-C90-S(-BK)

(xx=22,25,27,30,35,40,60)

4.3WMNP4 xxK-24V-C90(-BK)(xx=22,25,27,30,35,40,60)

22 : 2200K25 : 2500K27 : 2700K30 : 3000K35 : 3500K40 : 4000K60 : 6000K

8.6WMNP8 xxK-24V-C90(-BK)(xx=22,25,27,30,35,40,60)

DC 24V

286 mm(11 1/4”)

572 mm(22 1/2”)

52 mm(2”)

95 mm(3 3/4”)

MNP1 xxK-24V-C90-90(-BK)(xx=22,25,27,30,35,40,60)

MonoRail Pro

22 : 2200K27 : 2700K30 : 3000K35 : 3500K40 : 4000K50 : 5000K

DC 24V1.3W 55 mm

(2 3/16”)MRS1 xxK-24V-15(-BK,-CR)MRS1 xxK-24V-35(-BK,-CR)(xx=22,27,30,35,40,50)

2.6W 65 mm(2 9/16”)

MRS3 xxK-24V-25(-BK,-WT)MRS3 xxK-24V-45(-BK,-WT)MRS3 xxK-24V-60(-BK,-WT)

(xx=27,30,35,40,50)

MonoRail Spot17 mm(21/32”)

15.6 mm(5/8”)15.3 mm(19/32”)

15 mm(19/32”)

2500mm

Linear Type

30.6mm(1 7/32”)

17 mm(21/32”)

52 mm(2”)

52 mm(2”)

72 mm (2 27/32”)

H’

SIDEFEED : MNP1 xxK-24V-C90-S(-BK)

Spot TypeRAIL : MNR-RAIL

With MNR-RAIL and Bracket

With MNR-RAIL

BK : BLACKCR : CHROMEWT : WHITE

L’

L’

MRS1-15

MRS3-25

MRS1-35

MRS3-45

MRS3-60

BEAM ANGLE

BK : BLACK

Max.21/32”(17 mm)

Max.21/32”(17 mm)

Min.1/4”(7 mm)

Min.1 7/32”(30.6 mm)

MNR-BRACKET

Step.1 Insert MNR-Bracket onto MNR-Rail

Step.2 Fix combined Rail through screws above surface Step.3 Insert MonoRails above fixed Rail

Step.1 Fix adhesive MNR-Rail above surface Step.2 Insert MonoRails above fixed Rail

Max. wa�age in one ligh�ng row is 100 Wa�sMax. permi�ed ambient temperature : 45 ℃

☞ How to install luminaire through moun�ng bracket.

☞ How to install luminaire through adhesive tape

END CAP (MNR-CAP)

MNROPCx (x=none,1,2,4,6)

MNRPC

MNRPTCx (x=none,1,2,4,6)

HDV-BRACKET3

SIDEFEED

CAUTION Connec�ng between Rails should be used only MNP1 seriesLED DRIVER

MNP1 xxK-24V-C90-90(-BK)(Between product and product)

- Link MNR-RAIL to FLX S�x NDV through MNR-NDVPTCx (x=none(1/2),1,2,4,6 feet)- Link MNR-RAIL to FLX S�x NDPro through MNR-NDPPTCx (x=none(1/2),1,2,4,6 feet) (Linkable total lamp wa�age in one ligh�ng row Maximum 55 Wa�)

- Link MNR-RAIL to FLX S�x HDV/DDV through MNR-HDVPTCx (x=none(1/2),1,2,4,6 feet)- Link MNR-RAIL to FLX S�x HDPro/DDPro through MNR-HDPPTCx (x=none(1/2),1,2,4,6 feet) (Linkable total lamp wa�age in one ligh�ng row Maximum 75 Wa�)

- Link MNR-RAIL to FLX Spot DVS through MNR-DVSPTCx (x=none(1/2),1,2,4,6 feet) (Linkable total lamp wa�age in one ligh�ng row Maximum 30 Wa�)

MonoRail total lamp wa�age in one ligh�ng row Maximum 100 Wa�

MRS1 xxK-24V(-15,-35)(-BK,-CR)MRS3 xxK-24V(-25,-45,-60)(-BK,-WT)

- FLC200-24V (DC 24V 200W)

- FLC75-24V (DC 24V 75W)

- FLC30-24V (DC 24V 30W)

- FLC15-24V (DC 24V 15W)

DC 24V 15W

DC 24V 30W

DC 24V 75W

LED DRIVERMaximum interconnected units for LED DRIVER

MNP1/MRS1 MRS3 MNP410 5 3

21 11 7

53 28 17

DC 24V 200W 71 38 23

MNP82

4

9

11

E346673

48 mm(1 7/8”)

65 mm(2 9/16”)

Height H’

The unit conforms to the electromagne�c compa�bility direc�ve 2014/30/EU, and low voltage direc�ve 2014/35/EU! RISK OF FIRE (ATTENTION – RISQUE D’INCENDIE)! INHERENTLY PROTECTED (PROTECTION INHÉRENTE)! USE ONLY WITH CLASS 2 POWER UNIT (UTILISER SEULEMENT AVEC LA CLASSE 2 BLOC D’ALIMENTATION)! SUITABLE FOR DAMP LOCATIONS (CONVIENT AUX EMPLACEMENTS HUMIDES)! SUITABLE FOR UNDER-CABINET MOUNT (PEUT ÊTRE FIXÉ SOUS UNE ARMOIRE)! SUITABLE FOR INSTALLATION IN THE STORAGE AREA OF A CLOTHES CLOSET (APPROPRIÉ POUR L'INSTALLATION DANS LA ZONE DE STOCKAGE D'UN PLACARD)! INDOOR USE ONLY! LED light may be bright and intense enough to cause injury to human eyes. The customer should never look directly into the LED light.

# 15, 35, 25, 45, 60 is Beam Angle

Head Office : 235-48, Gwangjeok-ro, Gwangjeok-myeon, Yangju-si, Gyeonggi-do, Korea (www.feelux.com)