lq413 - amazon s3
Post on 29-May-2022
4 Views
Preview:
TRANSCRIPT
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe50,000hrs L
85B
50 (based on IESNA TM-21 Test Method and LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgMounts with a set of 4 x 3/8”-16 x 3 3/4” lg galvanized anchor bolts.
Ma
y 2
019
R
ev.0
lQ413/lQ423 SERIES lumiquad - leD
4” BOLLARD
1- Heavy cast aluminum top cover.2- Ø 4” (102) High impact white translucent acrylic
diffuser UV stabilized. Available acrylic heights include 12.7” (322) and 24.7” (627).
3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.6- Cast aluminum mounting base.
1
LQ413
LQ4234-5
1
2
3
6
LQ41312.7”
[322 mm]
LQ42324.7”
[627 mm]
42”[1066 mm]
4”[102 mm]
3.7”[94 mm]
2”[51 mm]
3”[76.2 mm]
BOLT CIRCLE
4 x 3/8”-16 BOLTS @ 90°
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs (Refer to page 3 for details)
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V.
For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- REML2-50 not compatible with PH (photocell).
ELECTRICAL
Fs Fuse
sP Surge protector 10KV
PH Photocell
reMl2-50 Remote mount battery backup (7W / 90 min.).
Remote mount to 50FT. 12” square enclosure with access cover.3
lQ413/lQ423 SERIES lumiquad - leD
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)
ACCESSORIES
gFi Ground fault circuit interruption flush receptacle (LQ413 only)2
CgF Ground fault circuit interruption with clear in-use cover (LQ413 only)2
BlC1 Blockout shield (one side)
BlC2 Blockout shield (two sides, installed at 90°)
BlC3 Blockout shield (three sides)
DeCo1 Decorative shroud
NOTE: Other CCT & higher CRI available, please consult factory.
lQ423
Descriptive information
LQ413-L4L20Total Lms: 2099 Lumens Total Input Watts: 19,7 WEfficacy: 106,6 Lumens/WattBUG: B1-U4-G2 CCT/CRI: 4000K/80Maximum Candela: 239 @ 37.5°H/85°V
1
2
Descriptive information
LQ423-L4L40Total Lms: 4198 Lumens Total Input Watts: 39,4 WEfficacy: 106,6 Lumens/WattBUG: B1-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 477 @ 37.5°H/85°V
1
2
SuFFIx INPuT WATTS DELIVERED LuMENS LuMEN / FT
L4L6 8W 857 857 L4L9 10W 1064 1064 L4L14 15W 1478 1478 L4L20 20W 2099 2099
SuFFIx INPuT WATTS DELIVERED LuMENS LuMEN / FT
L4L12 11W 1271 636 L4L18 17W 1921 961 L4L28 27W 2956 1478 L4L40 40W 4198 2099
lQ413
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ413/lQ423 SERIES lumiquad - leD
oPtioNs
3
Ma
y 2
019
R
ev.0
DECO1Decorative shroud. 20% light transmission.
BLCBlockout shield available on up to three sides.
aCCessories
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx COLUMN VOLTAge FINISH OpTION OpTION OpTION
Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe50,000hrs L
85B
50 (based on IESNA TM-21 Test Method and LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgLumiquad column is designed for ease of access and installation. The castaluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanizedanchor bolts.
Ma
y 2
019
R
ev.0
lQ420/lQ440 SERIES lumiquad - leD
4” COLUMN
1
LumiStick
LQ420 / LQ440
4-5
1
2
3
1- Heavy cast aluminum top cover.2- Ø 4” (102) High impact white translucent
acrylic diffuser UV stabilized. Available acrylic heights include 24.7” (627) and 48.7” (1236).
3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum
square body.
LQ42024.7”
[627 mm]
LQ44048.7"
[1236 mm]
LQ42027.5 in
[697 mm]
LQ440 51.5"
[1307 mm]
4”[102 mm]
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs (Refer to page 3 for details)
Notes1- If no voltage is specified, luminaires are factory prewired by default for
120V. For other voltages, please specify with catalog number, or consult factory.
2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.
ELECTRICAL
lQ420/lQ440 SERIES lumiquad - leD
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)
SuFFIx INPuT DELIVERED LuMEN / FT WATTS LuMENS
L4L12 11W 1271 636 L4L18 17W 1921 961 L4L28 27W 2956 1478 L4L40 39W 4109 2055
L8L24 22W 2572 643 L8L36 34W 3843 961 L8L56 53W 5853 1463 L8L80 78W 8188 2047
ACCESSORIES
gFi Ground fault circuit interruption flush receptacle2
CgF Ground fault circuit interruption with clear in-use cover2
BlC1 Blockout shield (one side)
BlC2 Blockout shield (two sides, installed at 90°)
BlC3 Blockout shield (three sides)
DeCo1 Decorative shroud
MsD Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz (or 230VAC, 50Hz).
NOTE: Other CCT & higher CRI available, please consult factory.
POLE FOR LQ420 LQ440
LQP469 96” 120” LQP493 120” 144” LQP4117 144” 168” LQP4141 168” N/A
OAH COLuMN SELECTION
Descriptive information
LQ420-L4L40Total Lms: 4109 Lumens Total Input Watts: 38,9 WEfficacy: 105,8 Lumens/WattBUG: B1-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 467 @ 37.5°H/85°V
1
2
Descriptive information
LQ440-L8L80Total Lms: 8188 Lumens Total Input Watts: 77,4 WEfficacy: 105,7 Lumens/WattBUG: B2-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 931 @ 37.5°H/85°V
1
2
LQ420
LQ440
lQ420 lQ440
Fs Fuse
sP Surge protector 10KV
PH Photocell
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ420/lQ440 SERIES lumiquad - leD
oPtioNs
Ma
y 2
019
R
ev.0
3
aCCessories
DECO1Decorative shroud. 20% light transmission.
BLCBlockout shield available on up to three sides.
MouNtiNg iNForMatioN
2.8 in[71.1 mm]
3.7 in[94 mm]
ANCHOR BOLTPROJECTIONABOVE FINISHEDGRADE.
Ø 8.3”[211 mm] 15°
4”[101.6 mm]
9.1”[232 mm]
COLUMN ISSECURED WITH A SET OF (4) 1/2”-13 X 18” LG GALVANIZED ANCHOR BOLTS
MSD
Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz
(or 230VAC, 50Hz).
[76.2 mm]3”
3.89”[98.9 mm]
[101.6 mm]4”
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe60,000hrs L
70B
50 (based on IESNA TM-21 Test Method and LM-80 data).
Up to 70,000hrs L70
B50
(calculated projection from LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgLumiquad column is designed for ease of access and installation. The castaluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanizedanchor bolts.
Ma
y 2
019
R
ev.0
lQ421 SERIES lumiquad - leD
4” COLUMN
1- Cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.
1
LumiStick
LQ421
4-5
1
2
3
LQ421
27.4”[696 mm]
24.7”[627 mm]
4”[102 mm]
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs
ELECTRICAL
Fs Fuse
sP Surge protector 10KV
PH Photocell
lQ421 SERIES lumiquad - leD
staNDarD Colors
WHT Snow whiteBKT Jet blackBZT BronzeMST Matte silverGRT Titanium grayDGT Gun metalCHT Champagne
oPtioNal Colors
CS Custom colorRAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
lQ421
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)ACCESSORIES
gFi Ground fault circuit interruption flush receptacle2
CgF Ground fault circuit interruption with clear in-use cover2
BlC1 Blockout shield (one side)3
BlC2 Blockout shield (two sides, installed at 90°)4
BlC3 Blockout shield (three sides)4
lVr Glare control louvers provided with a 90° lens
MsD Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz (or 230VAC, 50Hz).
NOTE: Other CCT & higher CRI available, please consult factory.
POLE FOR LQ420
LQP469 96” LQP493 120” LQP4117 144” LQP4141 168”
OAH COLUMN SELECTION
SUFFIx INPUT WATTS DELIVERED LUMENS
L1L10-R2 12W 1159L1L20-R2 25W 2184L1L30-R2 38W 3100
L1L10-R5 14W 1039L1L20-R5 31W 2078L1L30-R5 51W 3034
type ii
type V
Descriptive information
LQ421-L1L30-R2Total Lms: 3100 Lumens Total Input Watts: 37,4 WEfficacy: 82,8 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 2458 @ 55°H/29°V
1
2
Descriptive information
LQ421-L1L30-R5Total Lms: 3034 Lumens Total Input Watts: 50,9 WEfficacy: 59,6 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 1134 @ 19.5°H/55°V
1
2
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V.
For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise
specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ421 SERIES lumiquad - leD
oPtioNs
Ma
y 2
019
R
ev.0
aCCessories
3
aCCessories
LVRGlare control louvers.
MSD
Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz
(or 230VAC, 50Hz).
BLCBlockout shield available on up to three sides.
MouNtiNg iNForMatioN
[76.2 mm]3”
3.89”[98.9 mm]
[101.6 mm]4”
2.8 in[71.1 mm]
3.7 in[94 mm]
ANCHOR BOLTPROJECTIONABOVE FINISHEDGRADE.
Ø 8.3”[211 mm] 15°
4”[101.6 mm]
9.1”[232 mm]
COLUMN ISSECURED WITH A SET OF (4) 1/2”-13 X 18” LG GALVANIZED ANCHOR BOLTS
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. .
liFe60,000hrs L
70B
50 (based on IESNA TM-21 Test Method and LM-80 data).
Up to 70,000hrs L70
B50
(calculated projection from LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.IP65.
MouNtiNgMounts with a set of 4 x 3/8”-16 x 3 3/4” lg galvanized anchor bolts.
Ma
y 2
019
R
ev.0
lQ427 SERIES lumiquad - leD
4” BOLLARD
1- Heavy cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.6- Cast aluminum mounting base.
1
LumiStick
LQ427
4-5
1
2
3
6
4”[102 mm]
24.7”[627 mm]
LQ427
42”[1066 mm]
3.7”[94 mm]
2”[51 mm]
3”[76.2 mm]
BOLT CIRCLE
4 x 3/8”-16 BOLTS @ 90°
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- REML2-50 not compatible with PH (photocell).3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.
ELECTRICAL
Fs Fuse
sP Surge protector 10KV
PH Photocell
reMl2-50 Remote mount battery backup (7W / 90 min.). Remote mount to 50FT. 12” square enclosure with access cover.2
lQ427 SERIES lumiquad - leD
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
lQ427
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)
ACCESSORIES
BlC1 Blockout shield (one side)3
BlC2 Blockout shield (two sides, installed at 90°)4
BlC3 Blockout shield (three sides)4
lVr Glare control louvers provided with a 90° lens
NOTE: Other CCT & higher CRI available, please consult factory.
Descriptive information
LQ427-L1L20-R2Total Lms: 2211 Lumens Total Input Watts: 24,7 WEfficacy: 89,3 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 1753 @ 55°H/29°V
1
2
Descriptive information
LQ427-L1L20-R5Total Lms: 2078 Lumens Total Input Watts: 31,3 WEfficacy: 66,3 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 777 @ 19.5°H/55°V
1
2
SuFFIx INPuT WATTS DELIVERED LuMENS
L1L10-R2 14W 1186 L1L20-R2 31W 2211
L1L10-R5 14W 1039 L1L20-R5 31W 2078
type ii
type V
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
BLCBlockout shield available on up to three sides.
lQ427 SERIES lumiquad - leD
oPtioNs
Ma
y 2
019
R
ev.0
3
aCCessoriesaCCessories
LVRGlare control louvers.
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe50,000hrs L
85B
50 (based on IESNA TM-21 Test Method and LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgMounts with a set of 4 x 1/2”-13 x 18” lg galvanized anchor bolts.
Ma
y 2
019
R
ev.0
lQ613/lQ623 SERIES lumiquad - leD
6” BOLLARD
1- Heavy cast aluminum top cover.2- Ø 6” (152) High impact white translucent acrylic
diffuser UV stabilized. Available acrylic heights include 12.7 (322) and 24.7” (627).
3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.6- Cast aluminum mounting base.
1
LumiStick
LQ613
LQ623
4-5
1
2
3
6
LQ61312.7”
[322 mm]
LQ62324.7”
[627 mm]
42”[1066 mm]
6”[152 mm]
5.7”[144.8 mm]
2.5”[64 mm]
4.25”[108 mm]
BOLT CIRCLE
4 x 1/2”-13 BOLTS @ 90°
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- REML2-50 not compatible with PH (photocell).
ELECTRICAL
Fs Fuse
sP Surge protector 10KV
PH Photocell
reMl2-50 Remote mount battery backup (7W / 90 min.). Remote mount to 50FT. 12” square enclosure with access cover.3
lQ613/lQ623 SERIES lumiquad - leD
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)
ACCESSORIES
gFi Ground fault circuit interruption flush receptacle (LQ613 only)2
CgF Ground fault circuit interruption with clear in-use cover (LQ613 only)2
BlC1 Blockout shield (one side)
BlC2 Blockout shield (two sides, installed at 90°)
BlC3 Blockout shield (three sides)
DeCo1 Decorative shroud
NOTE: Other CCT & higher CRI available, please consult factory.
lQ623
lQ613
Descriptive information
LQ613-L4L26Total Lms: 2713 Lumens Total Input Watts: 25,7 WEfficacy: 105,5 Lumens/WattBUG: B1-U5-G2 CCT/CRI: 4000K/80Maximum Candela: 312 @ 47.5°H/85°V
1
2
Descriptive information
LQ623-L4L40Total Lms: 4251 Lumens Total Input Watts: 39 WEfficacy: 109 Lumens/WattBUG: B1-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 488 @ 47.5°H/85°V
1
2
SuFFIx INPuT WATTS DELIVERED LuMENS LuMEN / FT
L4L6 8W 859 859 L4L9 10W 1085 1085 L4L14 14W 1537 1537 L4L20 19W 2171 2171 L4L26 26W 2713 2713
SuFFIx INPuT WATTS DELIVERED LuMENS LuMEN / FT
L4L12 11W 1311 656 L4L18 17W 1990 995 L4L28 25W 2849 1425 L4L40 39W 4251 2126
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
DECO1Decorative shroud. 20% light transmission.
BLCBlockout shield available on up to three sides.
lQ613/lQ623 SERIES lumiquad - leD
oPtioNs
3
Ma
y 2
019
R
ev.0
aCCessoriesaCCessories
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx COLUMN VOLTAge FINISH OpTION OpTION OpTION
Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe50,000hrs L
85B
50 (based on IESNA TM-21 Test Method and LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgLumiquad column is designed for ease of access and installation. For overall heights of 96” (8FT) to 168” (14FT): The cast aluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanized anchor bolts.For overall heights above 168” (14FT): The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18” LG galvanized anchor bolts.Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate.
Ma
y 2
019
R
ev.0
lQ620/lQ640/lQ670 SERIES lumiquad - leD
6” COLUMN
1- Heavy cast aluminum top cover.2- Ø 6” (152) High impact white translucent
acrylic diffuser UV stabilized. Available acrylic heights include 24.7” (696), 48.7” (1236) and 72.7 (1847).
3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum
square body.
1
LumiStick
LQ620 / LQ640 / LQ670
4-5
1
2
3
LQ62024.6”
[625 mm]
LQ64048.7”
[1236 mm]
LQ67072.6”
[1845 mm]
LQ62027.4”
[696 mm]
LQ64051.4”
[1306 mm]
LQ67075.4”
[1915 mm]
6”[152 mm]
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V.
For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.
lQ620/lQ640/lQ670 SERIES lumiquad - leD
oPtioNsELECTRICAL
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 2700K CCT 80 CRI (LCF: 0.91) K3 3000K CCT 80 CRI (LCF: 0.94) K35 3500K CCT 80 CRI (LCF: 0.98)
ACCESSORIES
gFi Ground fault circuit interruption flush receptacle2 CgF Ground fault circuit interruption with clear in-use cover2
BlC1 Blockout shield (one side) BlC2 Blockout shield (two sides, installed at 90°) BlC3 Blockout shield (three sides) DeCo1 Decorative shroud
MsD Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz (or 230VAC, 50Hz).
NOTE: Other CCT & higher CRI available, please consult factory.
POLE FOR LQ620 LQ640 LQ670
LQP669 96” 120” 144” LQP693 120” 144” 168” LQP6117 144” 168” 192” LQP6141 168” 192” 216” LQP6165 192” 216” 240”
SuFFIx INPuT DELIVERED LuMEN / FT WATTS LuMENS
L4L12 11W 1311 656 L4L18 17W 1990 995 L4L28 25W 2849 1425 L4L40 39W 4251 2126 L4L52 52W 5381 2691
L8L24 22W 2623 656 L8L36 32W 3708 927 L8L56 50W 5698 1425 L8L80 76W 8320 2080 L8L104 103W 10762 2691
L12L36 32W 3708 618 L12L54 47W 5472 912 L12L84 76W 8592 1432 L12L120 116W 12616 2103 L12L156 150W 15737 2623
LQ620
LQ640
LQ670
OAH COLuMN SELECTION
lQ620 lQ640 lQ670
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
Descriptive information
LQ620-L4L52Total Lms: 5381 Lumens Total Input Watts: 51,4 WEfficacy: 104,6 Lumens/WattBUG: B2-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 618 @ 47.5°H/85°V
1
2
Descriptive information
LQ640-L8L104Total Lms: 10762 Lumens Total Input Watts: 102,9 WEfficacy: 104,6 Lumens/WattBUG: B3-U5-G4 CCT/CRI: 4000K/80Maximum Candela: 1235 @ 47.5°H/85°V
1
2
Descriptive information
LQ670-L12L156Total Lms: 15737 Lumens Total Input Watts: 150 WEfficacy: 104,9 Lumens/WattBUG: B3-U5-G5 CCT/CRI: 4000K/80Maximum Candela: 1806 @ 47.5°H/85°V
1
2
Fs Fuse
sP Surge protector 10KV
PH Photocell
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ620/lQ640/lQ670 SERIES lumiquad - leD
oPtioNs
3
Ma
y 2
019
R
ev.0
MouNtiNg iNForMatioN
aCCessories
DECO1Decorative shroud. 20% light transmission.
BLCBlockout shield available on up to three sides.
2.8”[71.1 mm]
2.8”[71.1 mm]
18.0”[457.2 mm]
6.0”[152.4 mm]
Ø 2.5”[63.5 mm]
Ø 4.25”[108 mm]
Ø 6”[152.4 mm]
Ø 12”[304.8 mm]
15°
12.63”[320.8 mm]
3.5”[88.9 mm]
18.0”[457.2 mm]
FOR HEIGHTS ABOVE 168” (14FT) THROUGH 240” (20 FT), COLUMN IS SECURED WITH A SET OF (4) 3/4”-10 X 18” LG
GALVANIZED ANCHOR BOLTS
COLUMN IS SECURED WITH A SET OF (4) 1/2”-13 X 18” LG
GALVANIZED ANCHOR BOLTS
2.8”[71.1 mm]
2.8”[71.1 mm]
18.0”[457.2 mm]
6.0”[152.4 mm]
Ø 2.5”[63.5 mm]
Ø 4.25”[108 mm]
Ø 6”[152.4 mm]
Ø 12”[305 mm]
15°
12.6”[321 mm]
3.7”[91 mm]
18.0”[457.2 mm]
FOR HEIGHTS ABOVE 168” (14FT) THROUGH 240” (20 FT), COLUMN IS SECURED WITH A SET OF (4) 3/4”-10 X 18” LG
GALVANIZED ANCHOR BOLTS
COLUMN IS SECURED WITH A SET OF (4) 1/2”-13 X 18” LG
GALVANIZED ANCHOR BOLTS
OVERALL HEIGHTS FROM 96” (8FT) TO 168” (14FT) OVERALL HEIGHTS ABOVE 168” (14FT)
MSD
Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz
(or 230VAC, 50Hz).
[98.9 mm]3.89”
6”
[152.4 mm]
[101.6 mm]4”
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. .
liFe60,000hrs L
70B
50 (based on IESNA TM-21 Test Method and LM-80 data).
Up to 70,000hrs L70
B50
(calculated projection from LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgMounts with a set of 4 x 1/2”-13 x 18” lg galvanized anchor bolts.
Ma
y 2
019
R
ev.0
lQ627 SERIES lumiquad - leD
6” BOLLARD
1- Heavy cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.6- Cast aluminum mounting base.
1
LumiStick
LQ627
4-5
1
2
3
6
6”[152 mm]
LQ627
24.7”[627 mm]
42”[1066 mm]
5.7”[144.8 mm]
2.5”[64 mm]
4.25”[108 mm]
BOLT CIRCLE
4 x 1/2”-13 BOLTS @ 90°
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- REML2-50 not compatible with PH (photocell).3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.
ELECTRICAL
Fs Fuse
sP Surge protector 10KV
PH Photocell
reMl2-50 Remote mount battery backup (7W / 90 min.). Remote mount to 50FT. 12” square enclosure with access cover.2
lQ627 SERIES lumiquad - leD
staNDarD Colors
WHT Snow whiteBKT Jet blackBZT BronzeMST Matte silverGRT Titanium grayDGT Gun metalCHT Champagne
oPtioNal Colors
CS Custom colorRAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
lQ627
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)
ACCESSORIES
BlC1 Blockout shield (one side)3
BlC2 Blockout shield (two sides, installed at 90°)4
BlC3 Blockout shield (three sides)4
lVr Glare control louvers provided with a 90° lens
NOTE: Other CCT & higher CRI available, please consult factory.
Descriptive information
LQ627-L1L30-R2Total Lms: 3251 Lumens Total Input Watts: 31,1 WEfficacy: 104,6 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 2407 @ 55°H/42.5°V
1
2
Descriptive information
LQ627-L1L30-R5Total Lms: 3146 Lumens Total Input Watts: 35,8 WEfficacy: 87,9 Lumens/WattBUG: B2-U0-G0 CCT/CRI: 4000K/80Maximum Candela: 1063 @ 55°H/47.5°V
1
2
SuFFIx INPuT WATTS DELIVERED LuMENS
L1L10-R2 10W 1203L1L20-R2 19W 2081L1L30-R2 32W 3251
L1L10-R5 13W 1204L1L20-R5 23W 2134L1L30-R5 36W 3146
type ii
type V
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ627 SERIES lumiquad - leD
oPtioNs
Ma
y 2
019
R
ev.0
3
aCCessoriesaCCessories
BLCBlockout shield available on up to three sides.
LVRGlare control louvers.
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
Type: QUANTITy: prOjeCT:
CATALOgNUMber:
FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION
Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.
eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,
output over current protection, output short circuit protection with auto-recovery.
leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
liFe60,000hrs L
70B
50 (based on IESNA TM-21 Test Method and LM-80 data).
Up to 70,000hrs L70
B50
(calculated projection from LM-80 data).
FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.
CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.
MouNtiNgLumiquad column is designed for ease of access and installation. For overall heights of 96” (8FT) to 168” (14FT): The cast aluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanized anchor bolts.For overall heights above 168” (14FT): The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18” LG galvanized anchor bolts.Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate.
Ma
y 2
019
R
ev.0
lQ641 SERIES lumiquad - leD
6” COLUMN
1- Cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.
1
LumiStick
LQ641
4-5
1
3
2
6”[152 mm]
LQ641
51.4”[1306 mm]
48.7”[1236 mm]
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
2
Ma
y 2
019
R
ev.0
oPtioNs
Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V.
For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise
specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.
ELECTRICAL
lQ641 SERIES lumiquad - leD
staNDarD Colors
WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne
oPtioNal Colors
CS Custom color RAL RAL# color
(Refer to color chart)
120V 277V
Optional 347V 480V
VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)
luMiNaire seleCtioN
lQ641
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
tYPiCal PHotoMetrY suMMarY
LIGHT
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27 2700K CCT 80 CRI (LCF: 0.91)
K3 3000K CCT 80 CRI (LCF: 0.94)
K35 3500K CCT 80 CRI (LCF: 0.98)ACCESSORIES
gFi Ground fault circuit interruption flush receptacle2
CgF Ground fault circuit interruption with clear in-use cover2
BlC1 Blockout shield (one side)3
BlC2 Blockout shield (two sides, installed at 90°)4
BlC3 Blockout shield (three sides)4
lVr Glare control louvers provided with a 90° lens
MsD Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz (or 230VAC, 50Hz).
NOTE: Other CCT & higher CRI available, please consult factory.
OAH COLUMN SELECTION
Descriptive information
LQ641-L1L50-R2Total Lms: 5137 Lumens Total Input Watts: 55,3 WEfficacy: 92,9 Lumens/WattBUG: B2-U0-G2 CCT/CRI: 4000K/80Maximum Candela: 3803 @ 55°H/42.5°V
1
2
Descriptive information
LQ641-L1L50-R5Total Lms: 5144 Lumens Total Input Watts: 69,1 WEfficacy: 74,4 Lumens/WattBUG: B3-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 1738 @ 55°H/47.5°V
1
2
POLE FOR LQ641
LQP669 120” LQP693 144” LQP6117 168” LQP6141 192” LQP6165 216”
SUFFIx INPUT WATTS DELIVERED LUMENS
L1L15-R2 14W 1626 L1L25-R2 25W 2666 L1L50-R2 56W 5137
L1L15-R5 17W 1614 L1L25-R5 29W 2627 L1L50-R5 69W 5144
type ii
type V
Fs Fuse
sP Surge protector 10KV
PH Photocell
LUMINIS.COM
Luminaires may be altered for design improvement or discontinued without prior notice.
Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
LUMINIS
lQ641 SERIES lumiquad - leD
oPtioNs
3
Ma
y 2
019
R
ev.0
aCCessories
BLCBlockout shield available on up to three sides.
LVRGlare control louvers.
MouNtiNg iNForMatioN
MSD
Motion sensor device (high/low 25%).
255° coverage.
Installed at 180° from hand hole.
120/277VAC, 50/60Hz
(or 230VAC, 50Hz).
[98.9 mm]3.89”
6”
[152.4 mm]
[101.6 mm]4”
2.8”[71.1 mm]
2.8”[71.1 mm]
18.0”[457.2 mm]
6.0”[152.4 mm]
Ø 2.5”[63.5 mm]
Ø 4.25”[108 mm]
Ø 6”[152.4 mm]
Ø 12”[304.8 mm]
15°
12.63”[320.8 mm]
3.5”[88.9 mm]
18.0”[457.2 mm]
FOR HEIGHTS ABOVE 168” (14FT) THROUGH 240” (20 FT), COLUMN IS SECURED WITH A SET OF (4) 3/4”-10 X 18” LG
GALVANIZED ANCHOR BOLTS
COLUMN IS SECURED WITH A SET OF (4) 1/2”-13 X 18” LG
GALVANIZED ANCHOR BOLTS
2.8”[71.1 mm]
2.8”[71.1 mm]
18.0”[457.2 mm]
6.0”[152.4 mm]
Ø 2.5”[63.5 mm]
Ø 4.25”[108 mm]
Ø 6”[152.4 mm]
Ø 12”[305 mm]
15°
12.6”[321 mm]
3.7”[91 mm]
18.0”[457.2 mm]
FOR HEIGHTS ABOVE 168” (14FT) THROUGH 240” (20 FT), COLUMN IS SECURED WITH A SET OF (4) 3/4”-10 X 18” LG
GALVANIZED ANCHOR BOLTS
COLUMN IS SECURED WITH A SET OF (4) 1/2”-13 X 18” LG
GALVANIZED ANCHOR BOLTS
OVERALL HEIGHTS FROM 96” (8FT) TO 168” (14FT) OVERALL HEIGHTS ABOVE 168” (14FT)
top related