manual - airtel india...continue using remote 5 entry point lnb setup lnb type universal 1 0 9 . 7 5...
Post on 19-Nov-2020
2 Views
Preview:
TRANSCRIPT
Inclusions
USER MANUAL
Xstream Box (A)
HDMI Cable (B)
Remote (C)
Power Adaptor (D)
Connect power adaptor to power switch(5), turn on TV & Xstream box.
Connect your signal cable (coming from antenna) to SAT IN port(1) at rear of Xstream box.
I
Connect other end of HDMI cable to TV’s HDMI port (3).
III
V
II
Connect HDMI cable (provided with box) to HDMI port (2) at rear of
Xstream box.
Connect other end of power adaptor to DC IN port (4) at rear of Xstream box.
IV
1
2
3
4
5
Getting Started
1 2 6
7
83
4
5
Rear Panel
Wifi Power
Front Panel
Know your Xstream Box
1. SAT IN
2. Audio Out (L/R) Connect to the Audio
3. Video Out Connect to the Video in Jack on a TV or monitor
4. SPDIF
5. HDMI Out Connect to the HDMI IN Jack on an HDMI compatible TV or monitor
6. USB Port
7. ETHERNET
8. Power Connect the supplied AC adaptor
*Airtel Xstream Box supports latest HDMI 2.0 with backward compatibility. Customer’s TV should be HDCP compliant to use the Amazon Prime, Netflix or any other app which demands the same.
Click on Skip button using Airtel remote
Setting up your Xstream Box
1
Click on Skip button & move to next step
2
Select Yes to move on next screen
7
Select LNB type as Universal (If you don’t see this screen, skip to Step 9)
8a
Scan the signal strength and press OK
8c
Xstream box will initialise and landup on home screen.
10
Select SES-7 TP11
8b
Select skip to move on to next Screen
9
Connect with Wi-fi or skip if Internet connection is not available.
3
Select Yes to move on next screen
6
Sign in with your Google ID for regular updates
4
Accept the terms of service to continue using remote
5
Entry PointLNB SETUP
LNB Type Universal
1
0 9 . 7 5 0
1 0 . 6 0 0
SES-7
OFF
LNB Number
L.O. Low Freq(GHZ)
L.O. High Freq(GHZ)
Satellite
DiSEqC Port
Before Proceeding, please check that Set-top Box is connected according to The instruction in the user manual.
Entry PointSES-7 TP11
SES-7 TP13
SES-7 TP12
SES-7 TP14
SES-7 TP15
SES-7 TP16
Before Proceeding, please check that Set-Top Box is connected according to the instruction in the user manual.
Signal LockPlease wait while the device is fetching channel information
6
8
10
12
14
16
Signal Quality
BER: 4.75E-07
00
20
40
60
80
100
Signal Strength
Signal Levels: 73
NEXT
Follow these steps to access the LNB setting page and make required changes.
Navigate to Settings option using remote and press OK.
1
Scroll to Advanced Settings and select Satellite Scan tab.
2
On Satellite Scan, Simultaneously Select Option & Numeric 1 Key, then Option & Numeric 2 Key & Option & Numeric 3 Key to open the LNB Selection page/Menu.
3
MDU Customers having unicable setup
Tune to channel 121, if it is showing No Signal or Blank screen then follow the steps mentioned below and change the LNB Settings to Unicable
Change the LNB Type to Unicable by using remote navigation key and select Next Tab
4
Mic
Options
Home Button
Dedicated App Button
Messages
TV On/OffTV Channels
Google Assistant
Select SES-7 TP 11
5
On signal Page, Select Next button to move on
6
Note : Google sign in and internet are mandatory for voice search.
Xstream Voice SearchSay it to search it
Press Google Assistant Key Window will appear on the bottom of the screen - “How can I help you?” Hold the remote close to your chin Speak the name of the content you wish to view Click on Play
Click on the link below to watch Help Videos on Youtube
https://bit.ly/2S1loqE
Pairing Airtel Stream Remote with your TV Remote
Turn your Smartphone into a Remote/Gamepad
Use Voice Search
Advanced Settings
LNB Type: Unicable
1
0
1
9
0
7
6
5
0
0
0
SES-7
LNB Number:
L.O. Low Freq(GHZ):
L.O. High Freq(GHZ):
Satellite:
top related