mcsorley 442 e
Post on 27-Dec-2015
83 Views
Preview:
DESCRIPTION
TRANSCRIPT
H
H
Q
H
H
H
M1
H
P
D1
A1
F1
K1
N1
F2G2
G1
J1
J2
N2
K2
M2
A2
B2
B1
K3
K4
O1
O2 OO3
R
S
T
LA
LB
LD
LC
FU1
FU2
RU1
Z
Y
V
D2
442ECHASSIS
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251.00
251.00
81332.00
COCKPIT BOTTOMSIDE RAIL(A1 & A2)STEEL - RHS
1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
A
111844.0
251.0
251.0
COCKPIT BOTTOMCROSS RAIL
(B1 & B2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
B
251"
251"
80° 80°
92536.4
FRONT BULKHEADBOTTOM CROSS
RAIL (C)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
C
251"
251"
48519.1
105.3° 105.3°
FRONT ENGINE BAYBOTTOM CROSS RAIL
(E)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
E
251"
251"
58423.0
80.0° 100.0°
COCKPIT BOTTOMFRONT SIDE RAIL
(D1 & D2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
D
251"
251"
109743.2
74.7°
ENGINE BAY BOTTOM SIDE RAIL
(F1 & F2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
F
34113.4
92536.4
116846.0
58022.8
109042.9
81332.0 2436
95.9
54621.5
80.0°
78731.0
48519.1
2399.4
74.7°
B2B1
A1
A2
D1
D2
F1
F2
EC
NOTE: EDGE LENGTH, NOT OVERALL
ISOMETRIC VIEW:NOT TO SCALE
A1B1
B2F1
E
C
D1
BOTTOM RAILLAYOUT
McSORLEY 7+442E
SCALE:1:12
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
39915.7
103.7° 76.3°
117.2° 62.8°
FRONT ENDLEFT SIDE MEMBER
(LA)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LA
251"
251"
39915.7
76.3° 103.7°
117.2° 62.8°
FRONT ENDRIGHT SIDE MEMBER
(LB)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LB
50°50°251"
251"724
28.5
FRONT ENDTOP CROSS RAIL
(LC)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LC
39415.5
251"
251"
FRONT ENDBOTTOM CROSS RAIL
(LD)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LD
LC
LD
LB
LA ISOMETRIC VIEW:NOT TO SCALE
39415.5
72428.5
116.6°
50°
LA
LC
LD
LB
FRONT ENDASSEMBLY
903.5
15.3°
38115.0
LB
LC
LD
McSORLEY 7+442E
SCALE:1:4
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
frontEndAssembly
251"
251"
33013.0
CENTER UPRIGHT(H)
STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
H
BA
FRONT END ASSEMBLY("L" ASSEMBLY)
903.5
81332.0
54621.5
H4 PL
BOTTOM UPRIGHTRAIL LAYOUT
10.0°
DETAIL BSCALE 1 : 6
DETAIL ASCALE 1 : 6
ISOMETRIC VIEWNOT TO SCALE
H
H
HH
"L" ASSEMBLY
McSORLEY 7+4
SCALE:1:12
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
40° 50°
79031.1
REAR BULKHEADSIDE MEMBER
(K1 & K2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
K1_2
251"
251"
116846.0
REAR BULKHEADTOP CROSS RAIL
(O)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
O
251"
251"
51220.2
107° 73°
REAR BULKHEAD TOP CROSS RAIL SUPPORT
(K3 & K4)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
K3_4
251"
251"
25710.1
130°
REAR BULKHEADUPRIGHT SUPPORT
(M1 & M2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
M
53321.0
81332.0
64825.5
32812.940°
NOTE: ASSEMBLED PARTS FORWARDOF "B2" HIDDEN FOR CLARITY.
K2
K4
A2M2
116846.0
106742.0
K1
K3
K2
K4
A2
A1
B2B1O
A
B1
B2
K1
K2
A2
A1
O
K4
K3
K4
B1
A2
M1
M2
DETAIL ASCALE 1 : 4
ISOMETRIC VIEW:NOT TO SCALE
REAR BULKHEADSIDE RAIL LAYOUT
STEEL - RHS1"X1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
75129.6
140°
COCKPIT TOPSIDE RAIL(N1 & N2)STEEL - RHS
1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
N
251"
251"
156161.5
80° 100°
TOP FRONTSIDE RAIL(J1 & J2)STEEL - RHS
1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
J
251"
251"
80° 80°
92536.4
FRONT BULKHEADTOP CROSS RAIL
(Q)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Q
251"
251"
101439.9
80°80°
SCUTTLE SUPPORTCROSS RAIL
(P)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
P
251"
251"
36414.3
28.6°51.4°
FRONT DIAGONALSTRENGTH MEMBER
(S & T)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
S_T
75129.6
29211.5
2299.0
96237.9
101439.9 925
36.4
80.0°
57722.7
1777.0
36414.3
155761.3
51.4°
95837.7 2491
98.1
116846.0
O
K3
K1
K2
K4
N1
N2
J1
J2
S
T
P Q
NOTE: FRONT ASSEMBLY AND BOTTOM RAILS HIDDEN FOR CLARITY.
TOP RAIL LAYOUT
ON1
J1
ISOMETRIC VIEW:NOT TO SCALE
PN2
H4 PL
Q
McSORLEY 7+442E
SCALE:1:12
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
63525.0
80°
REAR END BOTTOMSIDE RAIL
(RU1 & RU2)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
RU
251"
251"
106742.0
REAR END BOTTOMOUTER CROSS RAIL
(V)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
V
251"
251"
101640.0
REAR END BOTTOMINNER CROSS RAIL
(Y)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Y
251"
251"
512.0
REAR END BOTTOMINNER CROSS RAILEXTENSION (Y_EXT)STEEL - RHS
1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Y_EXT
R512.0
512.0
1716.8
193/4"
REAR END BOTTOMCORNER TUBE
STEEL - TUBE3/4"
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearBottomCorner
1656.5
106742.0
66026.0
512.0
RU1
Y
V
RU2
REAR END CORNER2 PL
80.0°
A
251"
193/4"
DETAIL ASCALE 1 : 2
RU1Y
V
RU2
Y_EXT2 PL
REAR ENDBOTTOM
ASSEMBLYSTEEL - RHS1"x1" - 16swg,
3/4" TUBE
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
1024.0
1024.0
31/8"
REAR BULKHEADTOP PLATE
STEEL - PLATE1/8" THICK
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearPlate
193/4"
193/4"
1024.0
REAR BULKHEADTOP PLATEMEMBER
STEEL - RHS3/4" x 3/4", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearPlateMember
1024.0
31/8"
TOP PLATE
193/4"
1024.0
TOP PLATE MEMBER
REAR BULKHEADTOP PLATE ASSEMBLY
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearPlateAssembly
193/4"
193/4"
63825.1
48°52°
93° 87°
STEEL - RHS3/4" X 3/4", 16swg
REAR END LEFT SIDEDIAGONAL SUPPORT
MEMBER (W1)
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
W1
193/4"
193/4"
63825.1
48°52°
87° 93°
REAR END RIGHT SIDEDIAGONAL SUPPORT
MEMBER (W2)STEEL - RHS3/4" X 3/4", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
W2
31412.4
R763.0
115945.6
193/4"
REAR ENDTOP TUBE
STEEL - TUBE3/4"
McSORLEY 7+442E
SCALE:1:8
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearTopTube
193/4"
19.75
40215.8
84°
REAR END UPRIGHTSUPPORT TUBE
(X3 & X4)STEEL - TUBE
3/4"
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
X3_4
193/4"
60.2°109.8°
NOTE: OVERALL LENGTH = 18.9 [480]
REAR END DIAGONALBODY PANEL SUPPORT
(X1 & X2)STEEL - TUBE3/4" DIAM.
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
X1_2
O
B1
V
Y
RU2
RU1
W2
X2
W1
X1
REAR BULKEADPLATE ASSEMBLY2 PL NOTE: ALL ASSEMBLED PARTS FORWARD
OF "B1" AND "O" HIDDEN FOR CLARITY.
53321.0
W2W1X1 X2
SUPPORT TUBE
V
B1
1596 1/4"
53321.0
55922.0
52°
60°74°
10°1154.5 B1
TOP TUBE
RU2
W2 X2
REAR END LAYOUT
McSORLEY 7+442E
SCALE:1:8
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
106742.0
REAR BULKHEADCENTER CROSS RAIL
(O3)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
O3
251"
251"
31°
31°
52120.5
59.5°
REAR BULHEAD LEFTSIDE DIAGONAL
SUPPORT MEMBER (O1)STEEL - RHS1"X1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
O1
251"
251"
31°
52120.5
31°
59.5°
REAR BULKHEAD RIGHTSIDE DIAGONAL
SUPPORT MEMBER (O2)STEEL - RHS1"X1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
O2
193/4"
193/4"
2409.5
73.1°
REAR BULKHEAD TRANSMISSION TUNNEL
UPRIGHT (e&f)STEEL - RHS3/4"X3/4", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
trans_e_f
ISOMETRIC VIEW:NOT TO SCALE
B1
O3
O
A1
NOTE: FORWARD AND REAR END HIDDEN FOR CLARITY
K1
B2
O1
53321.0
NOTE: SIDE VIEW OF REAR BULKHEAD ONLY
27911.0
O1O2
O3
K4 K3_f
O
B1NOTE: SIDE RAILS HIDDEN IN FRONT VIEW FOR CLARIDY
_e
512.0
REAR BULKHEADLAYOUT
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
251"
251"
50.0° 40.0°
74.7°
74.7°
59723.5
REAR END DIAGONALSUPPORT MEMBER
(Z)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Z
251"
251"
34513.6
76.6° 103.4°
FRONT SUSPENSIONSUPPORT MEMBER
(FU1&FU2)STEEL - RHS1"X1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
FU
251"
251"
78931.1
87° 93°
ENGINE MOUNT BOTTOM INSIDE RAIL
(G1 & G2)STEEL - RHS1"x1", 16swg
McSORLEY 7+4
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
G
251"
251"
82232.4
76.7° 74.7°
ENGINE BAYSTRENGTH MEMBER
(R)STEEL - RHS1"x1", 16swg
McSORLEY 7+442E
SCALE:1:1
SIZE DWG. NO.
AREV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32ANGULAR 1TWO PLACE DECIMAL .03THREE PLACE DECIMAL .010
SHEET 1 OF 1WEIGHT:
THE INFORMATION CONTAINED IN THISDRAWING IS NOT INTENDED FOR USE INTHE CONSTRUCTION OR MANUFACTUREOF PARTS. THE INFORMATION IS PROVIDEDWITHOUT WARRANY FOR EDUCATIONALREFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
R
top related