metal fabrication quality and conformity of our products 2015
Post on 21-Jan-2016
224 Views
Preview:
TRANSCRIPT
Metal Fabrication
Quality and conformity of our products
2015
Reorder code: PR 67890Product name: M20ArC8
Conforms to ISO141758% CO2 in Argon
Cylinder size: X50SFill pressure: 200 bar @ 15OC
UN1956Compressed Gas (N.O.S) (Argon. Carbon Dioxide)
Weldsure Standard Gases
Reorder code: PR 12345Product name: Ferromaxx® 7
The thin & medium carbon steel specialist
Conforms to ISO14175M24 ArCO7/2.5
Cylinder size: X50SFill pressure: 300 bar @ 15OC
UN1956Compressed Gas (N.O.S) (Argon. Carbon Dioxide.
Oxygen)
Maxx® Gas
Example:
Weld process gas labels
Reorder code: PR 67890Product name: M20ArC8
Conforms to ISO141758% CO2 in Argon
Cylinder size: X50SFill pressure: 200 bar @ 15OC
UN1956Compressed Gas (N.O.S) (Argon. Carbon Dioxide)
Weldsure Standard Gases
Reorder code: PR 12345Product name: Ferrolinx® F
The thin & medium carbon steel specialist
Conforms to ISO14175M14 ArCO5/2
Cylinder size: X50SFill pressure: 200 bar @ 15OC
UN1956Compressed Gas (N.O.S) (Argon. Carbon Dioxide.
Oxygen)
Linx® Gas
Example:
Weld process gas labels
Certificate of Conformity
• Our weld process gases conform to ISO14175 & AWS 5.3.2
• We provide a Certificate of Conformity (COC) on request.
EN1090 Compliance
CE Marking & EN1090 applies to all fabricated structural products
• CE Marking of construction products was introduced in the Construction Products Directive (CPD) in 1989.
• The CPD was a European Directive that seeks to remove barriers to trade and applies to all construction products.
• On 1st July 2013 the CPD was replaced by the Construction Products Regulation (CPR). This is mandatory in all member states.
• The Construction Products Regulation (CPR) requires structural steel (including stainless steel) and aluminium products to be CE marked. EN1090 is a supporting standard which sets the requirements for conformity assessment of steel and aluminium structural components
Compliance with EN1090 is required for CE marking
• CE Marking requires a Factory Production Control (FPC) system described in EN1090 to be put in place and certified by a Notified Body
• Factory Production Control requirements: ‒ Welder Qualifications to ISO 9606‒ Weld Procedure Specifications (WPS) & Weld Procedure Qualifications Records
(WPQR) to ISO15614
• In WPS & WPQR the weld process gas is documented according ISO14175‒ Air Products technical support team can help‒ Record & document WPS‒ Develop standard WPS & WPQR‒ Using our Maxx® / Linx® gases and standard Weldsure gases and mixtures
CE marking required
Manufacture to EN1090
Fabrication processes qualified & Personnel
to ISO 15614 & ISO 9606
Weld process gases
specified to
ISO14175
Thank you tell me more
top related