multibox 25 - dicom ingenieros srl · 2016. 6. 19. · multibox 25 kd121-10e multibox 25 page 1/1...
Post on 29-Sep-2020
1 Views
Preview:
TRANSCRIPT
www.intertec.info
MULTIBOX 25
KD121-10e MULTIBOX 25 Page 1/1
}}
Made of hot-pressed glassfibre reinforced polyester(GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV-resistant Protection class IP65 EPDM seal Weight approx. 6kg
For further technical details see data sheet KD015
Heat transition Coefficient K
without window with window
Standard 2,5 W/K 2,9 W/K
arctic….. 0,9 W/K 1,3 W/K
Designs (Locking-type see data sheet KD152) SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE) DF in galvanized steel 1 pcs.
DFVA in stainless steel 2 pcs.
Window (see data sheet KD153 and KD154) FA acrylic glass window
mounted in
TE TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation PU-foam, not stackable
arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion Protection GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Dimensions Height Width Depth in mm (approx.) 485 x 385 x 240
TU female 130mm
TE male
110mmin TE or TU
TU TE
Ordering example.: MULTIBOX 25 SE DFVA FS TU arctic-PP GO
www.intertec.info
MULTIBOX 48
KD122-10e MULTIBOX 48 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester(GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV-resistant Protection class IP65 EPDM seal Weight approx. 7kg
For further technical details see data sheet KD015
Designs (locking-type see data see KD152) SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs.
DFVA in stainless steel 2 pcs.
Window (see data sheet KD153 and KD154) FA acrylic glass window mounted in
TE TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation PU-foam, not stackable
arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion Protection GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Dimensions Height Width Depth in mm (approx.) 485 x 385 x 380
Heat transition Coefficient K
without window with window
Standard 4,4 W/K 4,9 W/K
arctic….. 1,2 W/K 1,6 W/K
TU TE
Ordering example: MULTIBOX 48 SE DFVA FS TU arctic-PP GO
TU female 130mm
TE male
250 mm
in TE or TU
www.intertec.info
MULTIBOX 60
KD123-10e MULTIBOX 60 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV- resistant
Protection class IP65 EPDM seal
Weight approx. 8kg
For further technical details see data sheet KD015
Heat transition coefficient K
without window with window
Standard 4,5 W/K 5,1 W/K
arctic….. 1,3 W/K 1,9 W/K
Designs (Locking-type see data sheet KD152)
SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE
TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU-foam, not stackable
arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion Protection
GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class
IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Dimensions Height Width Depth in mm (approx.) 640 x 440 x 250
TU female 100mm
TE male
150mm
in TE or TU
Ordering example: MULTIBOX 60 SE DFVA FS TU arctic-PP GO
www.intertec.info
MULTIBOX 70
KD124-10e MULTIBOX 70 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV- resistant
EPDM seal Protection class IP65
Weight approx. 8,5kg
For further technical details see data sheet KD015
Designs (Locking-type see data sheet KD152)
SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU-foam, not stackable arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion Protection
GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class
IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Dimensions Height Width Depth in mm (approx.) 640 x 440 x 340
Heat transition coefficient K
without window with window
Standard 5,4 W/K 6,0 W/K
arctic….. 1,7 W/K 2,3 W/K
TE male
150mm TU
female 190mm
in TE or TU
Ordering example: MULTIBOX 70 SE DFVA FS TU arctic-PP GO
INTERTEC Inst rumentat ion - Sarn ia , Ontar io - Houston, Texas - Phone: 1-888-875-8756
www.intertec.info
MULTIBOX 80
KD126-9c MULTIBOX 80 Page 1/1
} }
Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, so that equipment can be installed in either the shallow or the deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in 316 stainless steel
Color: light gray, RAL 7032 UV-resistant
Protection class IP65 EPDM seal
Weight approx 20.9lbs, 9,5kg
For further technical details see data sheet KD015
Dimensions Height Width Depth
in inch (approx.) 29.5“ x 20.5“ x 9.8“
in mm (approx.) 750 x 520 x 250
Designs (Locking-type see data sheet KD152)
SV 4 latches in 316 stainless steel SE 2 hinges and 2 latches in 316 stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
LP in plated steel 1 pcs. LPSS in stainless steel LPGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE
TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU foam, not stackable arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion protection
GO antistatic to avoid electrostatic charges according to DIN EN IEC 60079-0
Ex p preparation for pressurization according to DIN EN IEC 60079-2
Protection Class
IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Heat transition coefficient K without window with window
Standard 6.8 W/K 7.2 W/K
arctic….. 1.8 W/K 2.5 W/K
27
.6/
70
0
5.5/ 140
4.3/ 110
9.8/ 250 15.8/ 400
20.5/ 520
24
.8/
63
0
29
.5/
75
0
Window 21.3x12.2/ 540x310
in TE or TU
0.6/ 15
0.1/ 3.5
18
.5/
47
0
Mounting element
Tapped hole M10x0.5“/ M10x13 mm deep
Washer
M1
0
0.2/ 5
0.6 /15
0.4 /9
1.7/ 42
TU female
5.5/ 140
TE male
4.3/110
Ordering Example: MULTIBOX 80 SE LPSS FS TU arctic-PP GO DimdddddDimensions in inches/ mm
www.intertec.info
MULTIBOX 100
KD125-10e MULTIBOX 100 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV- resistant
Protection class IP65 EPDM seal
Weight approx. 9,5kg
For further technical details see data sheet KD015
Designs (Locking-type see data sheet KD152)
SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE
TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU-foam, not stackable arctic-PP Polypropylene-lining
arctic-Alu Alu-foil-lining
Explosion Proof
GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class
IP66 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Dimensions Height Width Depth in mm (approx.) 640 x 440 x 430
Heat transition coefficient K
without window with window
Standard 6,8 W/K 7,4 W/K
arctic….. 1,9 W/K 2,5 W/K
TE male
150 mm
TU female
280 mm
in TE or TU
Ordering example: MULTIBOX 100 SE DFVA FS TU arctic-PP GO
www.intertec.info
MULTIBOX 150
KD127-9e MULTIBOX 150 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV- resistant
Protection class IP65 EPDM seal
Weight approx. 12kg
For further technical details see data sheet KD015
Dimensions Heigth Width Depth in mm (approx.) 750 x 520 x 430
Heat transition coefficient K
without window with window
Standard 8,5 W/K 9,2 W/K
arctic….. 2,3 W/K 3,0 W/K
Designs (Locking-type see data sheet KD152)
SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE
TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU-foam, not stackable
arctic-PP Polypropylene-lining arctic-Alu PU-foam, Alu-foil-lining
Explosion Protection
GO antistatic to avoid electrostatic charges according to DIN EN IEC 60079-0
Ex p preparation for pressurization according to DIN EN IEC 60079-2
Protection Class
IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
TU Female 140mm
TE Male
290mm
in TE or TU
Ordering example: MULTIBOX 150 SE DFVA FS TU arctic-PP GO
www.intertec.info
MULTIBOX 170
KD128-9e MULTIBOX 170 Page 1/1
}
}
Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel
Colour: light grey, RAL 7032 UV- resistant
Protection class IP65 EPDM seal
Weight approx. 12,5kg
For further technical details see data sheet KD015
Dimensions Height Width Depth in mm (appprox.) 750 x 520 x 480
Heat transition coefficient K
without window with window
Standard 9,1 W/K 9,8 W/K
arctic….. 2,4 W/K 3,1 W/K
Designs (Locking-type see data sheet KD152)
SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,
with angle for optional padlock
Lid Propstay (only design SE)
DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.
Window (see data sheet KD153 and KD154)
FA acrylic glass window
mounted in
TE
TU
FS safety glass window STA hinged door of acrylic glass
arctic additional Insulation
PU-foam, not stackable
arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining
Explosion Protection
GO antistatic to avoid electrostatic charges
according to DIN EN IEC 60079-0 Ex p preparation for pressurization according
to DIN EN IEC 60079-2
Protection Class
IP66 IP67 IP 68 CSA Enclosure Type 4X (NEMA 4X)
Vents and Drains (see data sheet KD184)
Ordering example: MULTIBOX 170 SE DFVA FS TU arctic-PP GO
TU Female 140mm
TE
Male 340mm
in TE or TU
top related