multiparameter meters - '+domain name+' meter also displays ph in mv readings—ideal for...
Post on 25-Apr-2018
215 Views
Preview:
TRANSCRIPT
www.hannainst.com 88..11
8M
ULTIPA
RAM
ETER METERS
S E C T I O N
C O N T E N T S
N A V I G A T I O N
Introduction. . . . . . . . . . . . . . . . . . . . . . 8.2
Bench Meters. . . . . . . . . . . . . . . . . . . . . 8.4
Portable Meters . . . . . . . . . . . . . . . . . . 8.8
Testers . . . . . . . . . . . . . . . . . . . . . . . . . . 8.17
Monitors . . . . . . . . . . . . . . . . . . . . . . . . 8.19
MU
LTIP
ARA
MET
ER M
ETER
S8
88..1100 With Great Products, Come Great Results™
HI 9828
Multiparameter Meterwith Intelligent Probe and T.I.S. — Tag Identification System
HI 769828 Multiparameter, Intelligent Probe
HI 9828 is supplied complete with a probemaintenance kit.
This kit includes HI 7042S (electrolyte solution for DOsensor), (5) O-rings for DO sensor, a small brush, (5) O-rings for multiparameter probe and a syringe with grease to lubricate the O-rings.
Fast Tracker™ Tag Identification SystemHANNA’s iButton® Tag Identification System simplifies testlogging. iButton®s with a unique ID can be installed at varioussampling sites. When the matching connector of the metercontacts the button and measurements are logged, they arelabeled with the alphanumeric user-entered location ID.Location, date, time and measurements are logged into themeter which can be transferred to a PC.
Sensor replacement is quick and easy with screw type connectors and color
coded sensors.
The galvanic DO sensor does not require polarization time so it’s ready at a moment’s notice.
The 4-ring conductivity system ensures stable conductivity readings that are immune to
surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity
and TDS determinations are possible with measurements from this sensor.
The HI 9828 automatically recognizes the presence of either the pH or pH/ORP sensor.
Both sensors have a cloth junction which allows greater sensitivity, and are gel filled for improvedresistance to contamination.
The meter also displays pH in mV readings—ideal for trouble shooting.
HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor andamplifiers that convert the high impedance signals from the sensors of the probe eliminatingcommon problems associated with high impedance signals such as limitation of cable lengthand noise. This allows the probe to have a reliable communication with the meter and alsoimmediately warns the user of problems such as a broken cable. The standard cable lengthsof the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.
The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH andconductivity with one solution in a single, simple step. Dissolved Oxygen is also calibratedin one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC,dissolved oxygen and temperature. The sensors are all independently replaceable and are easyto maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeveand cap which is suitable for use in 2” wells. The probe housing is rated IP68 standard.
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..1111
HI 9828
Multiparameter Meterwith Intelligent Probe and T.I.S. — Tag Identification System
ORDERING INFORMATIONHI 9828-01 (115V) and HI 9828-02 (230V) issupplied with HI 769828 multisensor probe(pH/ORP, EC, DO, temperaure), HI 9828-25 quickcalibration standard solution (500 mL), probemaintenance kit, rechargeable C size Ni-MHbatteries (4), power adapter & cable, car 12Vaccessory outlet adapter, HI 7698281 USBinterface cable, HI 92000 Windows® compatiblesoftware and instruction manual in a ruggedcarrying case.
HI 9828/
x =4 , 4 m probe cablex =10 , 10 m probe cablex =20 , 20 m probe cableUp to 100m
SPECIFICATION HI 9828
pHRange 0.00 to 14.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
mV of pHinput
Range ±600.0 mV
Resolution 0.1 mV
Accuracy ±0.5 mV
ORPRange ±2000.0 mV
Resolution 0.1 mV
Accuracy ±1.0 mV
DissolvedOxygen
Range 0.0 to 500.0% / 0.00 to 50.00 mg/L
Resolution 0.1% / 0.01 mg/L
Accuracy0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%:
±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is
greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading
Conductivity
Range 0.000 to 200.000 mS/cm (actual EC up to 400 mS/cm)
Resolution
Manual: 1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm;
Automatic: 1 μS/cm from 0 to 9999 μS/cm; 0.01 mS/cm from 10.00 to 99.99
mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm;
Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from
10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
Accuracy ±1% of reading or ±1 μS/cm whichever is greater
ResistivityRange 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resolution Dependent on resistivity reading
TDS
Range 0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor)
Resolution
Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt);
Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt)
from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt);
Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L
(ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Accuracy ±1% of reading or ±1 mg/L
SalinityRange 0.00 to 70.00 PSU (Practical Salinity Scale)
Resolution 0.01 PSU
Accuracy ±2% of reading or 0.01 PSU whichever is greater
SeawaterSpecificGravity
Range 0.0 to 50.0 σt, σ0, σ15
Resolution 0.1 σt, σ0, σ15
Accuracy ±1 σt, σ0, σ15
Atm. PressureRange
450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436
psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution 0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy ±3 mmHg within ±15°C from the temperature during calibration
TemperatureRange -5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
Resolution 0.01°C; 0.01°F; 0.01K
Accuracy ±0.15°C; ±0.27°F; ±0.15K
Calibration
pHAutomatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86,
7.01, 9.18, 10.01) or 1 custom buffer
ORP Automatic at 1 custom point
Conductivity,Salinity
Automatic 1 point with 6 memorized standards (84 μS/cm, 1413 μS/cm, 5.00
mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
DO Automatic 1 or 2 points at 0, 100% or 1 custom point
Resistivity, TDS, σ Based on conductivity or salinity calibration
Atm. Pressure Automatic at 1 custom point
Temperature Automatic at 1 custom point
Temperature Compensation Automatic from -5 to 55°C (23 to 131°F)
Logging Memory Up to 60000 samples with 13 measurements each
Logging Interval 1 second to 3 hours
Computer Interface USB (with HI 92000 software)
Waterproof Protection Meter IP67, Probe IP68
Environment 0 to 50°C (32 to 122°F); RH 100%
Power Supply(4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight) /(4)
1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight)
Dimensions Meter: 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”); Probe: 270 x 46 mm DIA (10.6 x 1.8”DIA)
Weight Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.)
PROBESHI 769828-0 pH sensor, single junction,
non refillableHI 769828-1 pH/ORP sensorHI 769828-2 DO sensorHI 769828-3 EC sensorQUICK CALIBRATION SOLUTIONSHI 9828-25 Quick calibration solution, 500 mLHI 9828-27 Quick calibration solution, 1 G pH CALIBRATION SOLUTIONSHI 7004L pH 4.01 buffer solution, 500 mLHI 7007L pH 7.01 buffer solution, 500 mLHI 7010L pH 10.01 buffer solution, 500 mLORP CALIBRATION SOLUTIONSHI 7021L ORP test solution @240 mV, 500 mLHI 7022L ORP test solution @470 mV, 500 mLDISSOLVED OXYGEN SOLUTIONSHI 7040L Zero oxygen solution, 500 mLHI 7042S Electrolyte solution, 30 mLCONDUCTIVITY CALIBRATION SOLUTIONSHI 7030L 12880 μS/cm solution, 500 mLHI 7031L 1413 μS/cm solution, 500 mLHI 7033L 84 μS/cm solution, 500 mLHI 7034L 80000 μS/cm solution, 500 mLHI 7035L 111800 μS/cm solution, 500 mLHI 7039L 5000 μS/cm solution, 500 mLTDS CALIBRATION SOLUTIONSHI 7032L 1382 ppm (mg/L) solution, 500 mLHI 7036L 12.41 ppt (g/L) solution, 500 mLCLEANING AND MAINTENANCE SOLUTIONSHI 70300L Electrode storage solution, 500 mLHI 7061L Electrode cleaning solution, 500 mLACCESSORIESHI 7698281 USB interface cableHI 7698282 Probe maintenance kitHI 7698283 Calibration beakerHI 7698284 Flow cellHI 710045 Power supply cableHI 710046 Lighter cigarette cableHI 710005 115 Vac/12 Vdc pwr adapter (US)HI 710006 230 Vac/12 Vdc pwr adapter (EU)HI 710012 230 Vac/12 Vdc, pwr adapter (UK)HI 710013 230 Vac/12 Vdc, pwr adapter (S.A.)HI 710014 230 Vac/12 Vdc, pwr adapter (AUS.)HI 92000 Software applicationHI 920005 iButton® with holder (5 pcs)
x
ORDERING INFORMATION
HI 991300 and HI 991301 are supplied with
HI 1288 probe with 1 m (3.3’) cable, batteries,
rugged carrying case and instructions.
ELECTRODES
HI 1288 pH/conductivity probe with
built-in temperature sensor, DIN
connector and 1 m (3.3’) cable
SOLUTIONSHI 7004L pH 4.01 buffer solution, 500 mLHI 7007L pH 7.01 buffer solution, 500 mLHI 7010L pH 10.01 buffer solution, 500 mLHI 7030L 12880 μS/cm calibration solution,
500 mLHI 7031L 1413 μS/cm calibration solution,
500 mLHI 7032L 1382 ppm (mg/L) calibration
solution, 500 mL
HI 7038L 6.44 ppt calibration solution, 500 mL
HI 70442L 1500 ppm calibration solution,500 mL
HI 70300L Electrode storage solution, 500 mL
HI 7061L Electrode cleaning solution, 500 mL
ACCESSORIESHI 710007 Shockproof rubber boot, blue
HI 710008 Shockproof rubber boot, orange
2 Button Operation forDemanding ApplicationsHANNA offers you a choice of 2 meters to meet your exacting requirements.
HI 991300 and HI 991301 both measurepH, electrical conductivity, total dissolvedsolids and temperature in a singleinstrument. To increase precision, you canselect the meter which will work best withyour range of conductivity—from purifiedto brackish waters.
There are only 2 buttons, yet you canselect from a range of calibration buffersand even the temperature scale (°C or °F)most familiar to you. The housing iswaterproof and rated for IP 67 conditions.
The multi-parameter probe, HI 1288,includes pH, EC/TDS and temperature inone convenient, rugged handle.
Other user selectable features includedifferent TDS factors from 0.45 to 1.00,and a range of temperature coefficients(β) from 0.0 to 2.4%. Also selectable arestandardized buffer recognition values.
To ensure against interference fromtransient electrical noise, a solid-stateamplifier is integrated into the probe.
• 4 parameters - one probe• Extendable cloth junction• Waterproof casing
SPECIFICATIONS HI 991300 HI 991301
Range
pH 0.00 to 14.00 pH
EC 0 to 3999 μS/cm 0.00 to 20.00 mS/cm
TDS 0 to 2000 ppm (mg/L) 0.00 to 10.00 ppt (g/L)
Temperature 0.0 to 60.0°C (32.0 to 140.0°F)
Resolution
pH 0.01 pH
EC 1 μS/cm 0.01 mS/cm
TDS 1 ppm 0.01 ppt
Temperature 0.1°C (0.1°F)
Accuracy(@20°C/68°F)
pH ±0.01 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature ±0.5°C (±1.0°F)
TDS Conversion Factor selectable 0.45 to 1.00 with 0.01 increments (default 0.50)
pH Calibrationautomatic at 1 or 2 points with 2 sets of memorized standard buffers
(pH 4.01/7.01/10.01 or pH 4.01/6.86/9.18)
EC/TDS Calibration
automatic, 1 point at
1382 ppm (CONV=0.5) or at
1500 ppm (CONV =0.7) or at
1413 μS/cm
automatic, 1 point at
6.44 ppt (CONV=0.5) or at
9.02 ppt (CONV=0.7) or at
12880 μS/cm
TemperatureCompensation
pH automatic
EC/TDS automatic with selectable β from 0.0 to 2.4%/°C with 0.1 increments
Probe HI 1288, pH/EC/TDS/T, DIN connector, 1 m (3.3’) cable (included)
Battery Type / Life (4) 1.5V AAA / approximately 500 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 150 x 80 x 36 mm (5.9 x 3.1 x 1.4”) / 210g (7.4 oz.)
MU
LTIP
ARA
MET
ER M
ETER
S8
88..1122 With Great Products, Come Great Results™
HI 991300 • HI 991301
pH/EC/TDS/Temperature Meters Waterproof with Advanced Features
Extendable clothjunction
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..1133
ORDERING INFORMATION
HI 9813-6 is supplied with HI 1285-6pH/EC/TDS/°C probe with Clean & Cal, HI 50021test solution sachets (2), pH 7.01 calibrationsolution sachet (20 mL), 1.41 mS/cm and 1500ppm calibration solution sachets (1 ea.) , cleaningsolution sachet (2), protective case, 9V batteryand instruction manual.
PROBESHI 1285-6 pH/EC/TDS/°C probe, with Clean &
Cal, 1 m (3.3) cable
SOLUTIONSHI 70300L Elecrode storage solution, 500 mLHI 7061L Cleaning solution, 500 mLHI 77100P pH 7 and 1413 μS/cm calibration
solution (20) 20 mL sachets, (10)
HI 77200P pH 7 and 1500 ppm calibration solution (20) 20 mL sachets, (10)
HI 50021P Clean & Cal solution 20 mL sachets (25)
ACCESSORIESHI 710015 Shockproof rubber boot, blue
HI 710016 Shockproof rubber boot, orange
HI 710022 Blue protective case
Designed for GrowerspH electrodes are commonly designed toproduce an output signal equal to 0 mVwhen immersed in a solution with pH 7.But a constant output value at pH 7occurs as a result of certain adverseevents, such as:
• A broken bulb in the pH electrode• A short circuit in the cable or
connector• Magnetic force leakage in the cable or
connector (for example, in case of excessive humidity)
In these situations, the instrumentdisplays a false reading at pH 7 and theuser may not be aware that correctivemeasures are necessary; particularly if theuser is anticipating a neutral pH reading.To avoid this problem, HANNA developedF.S.T. technology.
With this special security system, asystem failure will force a fixed valueclose to pH 4, rather than pH 7, andrender the problem clearer to the user.
For extra confidence in your measurements,the meter is equipped with two LEDs anda "CHECK" button. While pressing thisbutton, upon immersing the electrode inthe CAL CHECK™ solution HI 50021P, oneof the LEDs will light up to indicate thestatus of the meter. The green LED ("OK")indicates the probe is working correctly,while the red LED "C&C" (Clean & Cal)indicates the electrode needs attention.
• Exclusive Clean & Cal feature• Fast response probe• °C measurement
HI 9813-6
pH/EC/TDS/Temperature Combined MeterWater Resistant and Features F.S.T. - Fail Safe Technology
SPECIFICATIONS HI 9813-6
Range
pH 0.0 to 14.0 pH
EC 0.00 to 4.00 mS/cm
TDS 0 to 1999 ppm (mg/L)
Temperature 0.0 to 60.0°C
Resolution
pH 0.1 pH
EC 0.01 mS/cm
TDS 1 ppm (mg/L)
Temperature 0.1°C
Accuracy(@20°C/68°F)
pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature ±0.5°C
TDS Conversion Factor 0.56 to 0.72 ppm = 1 μS/cm
Calibration manual at 1 point (all parameters except temperature)
Temperature Compensation automatic 0 to 50°C (32 to 122°F) with ß=2%/°C (EC/TDS only)
Probe HI 1285-6, pH/EC/TDS/T, with Clean & Cal, 1 m (3.3’) cable (included)
Battery Type / Life 9V / approximately 150 hours of continous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 165 x 75 x 45 mm (6.9 x 2.9 x 1.8”) / 180 g (6.3 oz.)HI 710022 Protective Case
MU
LTIP
ARA
MET
ER M
ETER
S8
88..1144 With Great Products, Come Great Results™
ORDERING INFORMATIONHI 9813-0 is supplied with HI 1285-0 pH/EC/TDSprobe, pH 7.01 calibration solution sachet (20 mL), 1.41 mS/cm and 1500 ppm calibrationsolution sachets (1 ea.) , cleaning solution sachet (2), protective case, 9V battery andinstruction manual.
HI 9813-5 is supplied with HI 1285-5pH/EC/TDS/°C probe, pH 7.01 calibration solutionsachet (20 mL), 1.41 mS/cm and 1500 ppmcalibration solution sachets (1 ea.) , cleaningsolution sachet (2), protective case, 9V batteryand instruction manual.
ELECTRODESHI 1285-0 pH/EC/TDS probe, 1 m (3.3’) cableHI 1285-5 pH/EC/TDS/°C probe, 1 m (3.3’) cable
SOLUTIONSHI 70300L Elecrode storage solution, 500 mLHI 7061L Cleaning solution, 500 mLHI 77100P pH 7 and 1413 μS/cm calibration
solution (20) 20 mL sachets, (10)HI 77200P pH 7 and 1500 ppm calibration
solution (20) 20 mL sachets, (10)HI 77400P pH 4 and 7 calibration solution
(10) 20 mL sachets, (5).
ACCESSORIESHI 710015 Shockproof rubber boot, blueHI 710016 Shockproof rubber boot, orangeHI 710022 Blue protective case
Rugged Meters Designedfor AgricultureHI 9813-0 allows you to measure pH, EC and TDS with just one instrument! This meter has a full-spectrum pHmeasurement range.
The EC range goes to 4.00 mS/cm. In theTDS range, both instruments use aconversion factor from 0.56 to 0.72 forfertilizer readings, to ensure yourmeasurements fully conform to industrystandards.
The specially engineered HI 1285-0 probeis interchangeable and the pH electrodeutilizes a fiber junction and gelelectrolyte which are particularly suitablewhen used in fertilizer solutions.
HI 9813-0 and HI 9813-5 measureTDS in the 0 to 1999 ppm range.
HI 9813-5 also performs temperaturemeasurements, with the special probe HI 1285-5
• Measure pH, EC and TDS• Fast response probe• Compact and lightweight
HI 9813-0 • HI 9813-5
Rugged pH/EC/TDS Metersfor Growers
SPECIFICATIONS HI 9813 HI 9813-5
Range
pH 0.0 to 14.0 pH
EC 0.00 to 4.00 mS/cm
TDS 0 to 1999 ppm (mg/L)
Temperature — 0.0 to 60.0°C
Resolution
pH 0.1 pH
EC 0.01 mS/cm
TDS 1 ppm (mg/L)
Temperature — 0.1°C
Accuracy (@20°C/68°F)
pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature — ±0.5°C
TDS Conversion Factor 0.56 to 0.72 ppm = 1 μS/cm
Calibration manual at 1 point (all parameters except temperature)
Temperature Compensation automatic, 0 to 50°C (32 to 122°F) with β=2%/°C (EC/TDS only)
ProbeHI 1285-0, pH/EC/TDS,
1 m cable (included)
HI 1285-5, pH/EC/TDS/°C,
1 m cable (included)
Battery Type / Life 9V / approximately 150 hours of continous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 165 x 75 x 45 mm (6.9 x 2.9 x 1.8”) / 180 g (6.3 oz.)
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..1155
ORDERING INFORMATIONHI 9812-0 is supplied with HI 1285-0 pH/EC/TDSprobe, pH 7.01 calibration solution sachet (20 mL), 1382 ppm and 1413 μS/cm calibrationsolution sachets (1 ea.), cleaning solution sachet(2), protective case, 9 V battery and instructions.
HI 9812-5 is supplied with HI 1285-5pH/EC/TDS/°C probe, pH 7.01 calibration solutionsachet (20 mL), 1382 ppm and 1413 μS/cmcalibration solution sachets (1 ea.), cleaningsolution sachet (2), protective case, 9 V batteryand instructions.
ELECTRODESHI 1285-0 pH/EC/TDS probe, 1 m (3.3’) cable
HI 1285-5 pH/EC/TDS/°C probe, 1 m (3.3’) cable
SOLUTIONSHI 70300L Elecrode storage solution, 500 mLHI 7061L Cleaning solution, 500 mLHI 77100P pH 7 and 1413 μS/cm calibration
solution (20) 20 mL sachets, (10)HI 77300P pH 7 and 1382 ppm calibration
solution (20) 20 mL sachets, (10).HI 77400P pH 4 and 7 calibration solution
(10) 20 mL sachets, (5)
ACCESSORIESHI 710015 Shockproof rubber boot, blueHI 710016 Shockproof rubber boot, orangeHI 710022 Blue protective case
Versatile Instruments forWater ConditioningReduce your necessary tool set for fieldwater-quality analysis. HI 9812-0 and HI 9812-5 are easy to use waterproofportable instruments for fieldmeasurements of pH, conductivity andTDS. HI 9812-0 and HI 9812-5 measurepH from 0.0 to 14.0 and measures TDSfrom 0 to 1990 mg/L—ideal for the waterconditioning field. Calibration has beensimplified to one point for both pH andconductivity/TDS modes.
Both HI 9812-0 and HI 9812-5 areequipped with Automatic TemperatureCompensation to remove the effects oftemperature on your pH, conductivity andTDS measurements. In addition, the BEPS(Battery Error Prevention System) willalert the user when low batteries couldaffect the readings.
HI 9812-0 uses our 4-in-1 replaceable HI 1285-0 probe, while HI 9812-5 uses HI 1285-5. No probe changes are requiredwhen switching your measured parameterbetween pH, conductivity and TDS.
Specifically engineered for water-qualityapplications, the pH electrode features afiber junction and gel electrolyte thatprovides faster response and reducedcontamination.
Finally, HI 9812-5 also measurestemperature in °C.
• Lightweight and easy to carry• BEPS equipped to warn users
when low batteries could effect readings
• Probe, batteries, carrying case and starter solutions included
HI 9812-0 • HI 9812-5
pH/EC/TDS MetersIdeal for Measurements in the Field
SPECIFICATIONS HI 9812-0 HI 9812-5
Range
pH 0.0 to 14.0 pH
EC 0 to 1990 μS/cm
TDS 0 to 1990 ppm (mg/L)
Temperature — 0 to 60°C
Resolution
pH 0.1 pH
EC 10 μS/cm
TDS 10 ppm (mg/L)
Temperature — 1°C
Accuracy(@20°C/68°F)
pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature — ±1°C
TDS Conversion Factor 0.5 ppm = 1 μS/cm
Calibration manual at 1 point (all parameters, except temperature)
Temperature Compensation automatic 0 to 50°C with ß = 2% /°C (EC/TDS only)
ProbeHI 1285-0, pH/EC/TDS,
1 m (3.3’) cable (included)
HI 1285-5, pH/EC/TDS/T,
1 m (3.3’) cable (included)
Battery Type / Life 9V / approximately 150 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 165 x 75 x 45 mm (6.9 x 2.9 x 1.8”) / 180 g (6.3 oz.)
HI 710022 Protective Case
MU
LTIP
ARA
MET
ER M
ETER
S8
88..1166 With Great Products, Come Great Results™
ORDERING INFORMATIONHI 9811-0 is supplied with HI 1285-0 pH/EC/TDSprobe, pH 7.01 calibration solution sachet (20 mL), 1382 ppm and 1413 μS/cm calibrationsolution sachets (1 ea.), cleaning solution sachet(2), protective case, 9 V battery and instructions.
HI 9811-5 is supplied with HI 1285-5pH/EC/TDS/°C probe, pH 7.01 calibration solutionsachet (20 mL), 1382 ppm and 1413 μS/cmcalibration solution sachets (1 ea.), cleaningsolution sachet (2), protective case, 9 V batteryand instructions.
ELECTRODESHI 1285-0 pH/EC/TDS probe, 1 m (3.3’) cable
HI 1285-5 pH/EC/TDS/T probe, 1 m (3.3’) cable
SOLUTIONS
HI 70300L Elecrode storage solution, 500 mL
HI 7061L Cleaning solution, 500 mL
HI 77100P pH 7 and 1413 μS/cm calibration solution (20) 20 mL, (10)
HI 77300P pH 7 and 1382 ppm calibration solution (20) 20 mL, (10)
HI 77400P pH 4 and 7 calibration solution (10) 20 mL, (5)
ACCESSORIES
HI 710015 Shockproof rubber boot, blue
HI 710016 Shockproof rubber boot, orange
HI 710022 Blue protective case
Ideal for Industrial,Commercial andAgricultural UseHI 9811-0 and HI 9811-5 are waterproofportable meters for field measurements ofpH, conductivity and TDS. Thesemultiparameter meters reduce the numberof instruments required for water qualityanalysis. The rugged housing has beenspecifically designed to withstand theheavy demand of field applications. HI 9811-0 and HI 9811-5 measures pHfrom 0 to 14 with 0.1 resolution. Theinstrument also measures conductivityfrom 0 to 6000 µS/cm and TDS from 0 to3000 mg/L. These ranges make bothmeters perfect for use in boilers andcooling towers, as well as printing andagriculture applications. Calibration issimplified to one point for both pH andconductivity/ TDS modes.
HI 9811-0 and HI 9811-5 both featureAutomatic Temperature Compensation andBEPS (Battery Error Prevention System)which alerts the user when low batteriescould adversely affect readings.
HI 9811-0 uses the 4-in-1 replaceableprobe HI 1285-0 for pH/EC/TDS, while theHI 9811-5 uses the HI 1285-5 probe,which measures pH/EC/TDS and °C.
• Measure pH, EC from 0 to 6000 µS/cm and TDS
• Lightweight and easy to carry• BEPS equipped to warn users
when low batteries could effect readings
• Probe, batteries, carrying case and starter solutions included
HI 9811-0 • HI 9811-5
pH and Conductivity to 6000 μS/cm Meterswith Water Resistant Casings
SPECIFICATIONS HI 9811-0 HI 9811-5
Range
pH 0.0 to 14.0 pH
EC 0 to 6000 μS/cm
TDS 0 to 3000 mg/L (ppm)
Temperature — 0.0 to 70.0°C
Resolution
pH 0.1 pH
EC 10 μS/cm
TDS 10 mg/L
Temperature — 0.1°C
Accuracy(@20°C/68°F)
pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature — ±0.5°C
TDS Conversion Factor 0.5 mg/L = 1 μS/cm
Calibration manual at 1 point (all parameters except temperature)
Temperature Compensation automatic 0 to 50°C with ß = 2% /°C (EC/TDS only)
ProbeHI 1285-0 pH/EC/TDS,
1 m cable (included)
HI 1285-5 pH/EC/TDS/T,
1 m cable (included)
Battery Type / Life 9V / approximately 150 hours of continous use
Environment 0 to 50°C (32 to 122°F); RH 100%
Dimensions / Weight 165 x 75 x 45 mm (6.9 x 2.9 x 1.8”) / 180 g (6.3 oz.)
HI 70300L — Electrode Storage Solution
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..1177
HI 98129 • HI 98130
pH/Conductivity/TDS TestersWaterproof and Designed to Float
ReplaceablepH electrodecartridgeThe Combo featuresan easy-to-replacepH electrode andhas an extendable cloth junction. The sturdy,snap-in connector means there are no pins tobend or break.
High accuracyThe graphite cond-uctivity electrodeprovides greateraccuracy because itcannot be contam-inated by saltdeposits in the solution. The exposedtemperature sensor provides fast responsetimes, and guarantees accurate temperaturecompensated readings.
Automatic temperature
compensationAutomatic calibrationAutomatic
shut-off
ReplaceablepH electrode
cartridge
EC/TDSgraphite
electrode
“DirectContact”
temperatureprobe
Dual-levelLCD
Floating, waterproofcasing
ORDERING INFORMATIONHI 98129 (Combo) and HI 98130 (Combo) aresupplied with 1.5V batteries (4), HI 73127 pHelectrode and HI 73128 electrode removal tool.
ELECTRODESHI 73127 Spare pH electrode for (Combo)
SOLUTIONSHI 70004P pH 4.01 buffer solution,
20 mL sachets (25)
HI 70006P pH 6.86 buffer solution, 20 mL sachets (25)
HI 70007P pH 7.01 buffer solution, 20 mL sachets (25)
HI 70009P pH 9.18 buffer solution, 20 mL sachets (25)
HI 70010P pH 10.01 buffer solution, 20 mL sachets (25)
HI 70030P 12.88 mS/cm buffer solution, 20 mL sachets (25)
HI 70031P 1413 μS/cm buffer solution, 20 mL sachets (25)
HI 70032P 1382 ppm buffer solution, 20 mL sachets (25)
HI 70038P 6.44 ppt buffer solution, 20 mL sachets (25)
HI 70442P 1500 ppm buffer solution, 20 mL sachets (25)
HI 70300M Electrode storage solution, 250 mLHI 7061M Electrode cleaning solution, 250 mL
ACCESSORIESHI 73128 Electrode removal tool
The Ultimate in HANNA
Combination Testers!HI 98129 and HI 98130 are waterprooftesters that offer high accuracy pH,EC/TDS and temperature measurements ina single tester! No more switchingbetween meters for your routinemeasurements. These floating, waterprooftesters have a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automaticallytemperature compensated (ATC).
These technologically advanced testershave a replaceable pH electrode cartridgewith an extendable cloth junction as wellas, an EC/TDS graphite electrode thatresists contamination by salts and othersubstances. This gives these meters anextended life. Your tester no longer needsto be thrown away when the pH sensor isexhausted.
The EC/TDS conversion factor is userselectable as well as the temperaturecompensation coefficient (β).
Fast, efficient, accurate and portable, theCombo pH, EC/TDS and temperature testerbrings you all the features you've askedfor and more!
Standard or N.I.S.TBuffer CalibrationAuto calibration isperformed with 2 sets ofmemorized buffers forgreater accuracy.
Adjustable TDSRatioFor measurement accuracy,users can choose betweendifferent conductivity toTDS conversion factors.
On-screen BatteryLifeLCD indicates thepercentage of battery powerremaining upon startup.
SPECIFICATIONS HI 98129 HI 98130
Range
pH 0.00 to 14.00 pH
EC 0 to 3999 μS/cm 0.00 to 20.00 mS/cm
TDS 0 to 2000 ppm 0.00 to 10.00 ppt
Temperature 0.0 to 60.0°C / 32.0 to 140.0°F
Resolution
pH 0.01 pH
EC 1 μS/cm 0.01 mS/cm
TDS 1 ppm 0.01 ppt
Temperature 0.1°C / 0.1°F
Accuracy (@20°C)
pH ±0.05 pH
EC / TDS ±2% F.S.
Temperature ±0.5°C /±1°F
Temperature Compensation pH: automatic; EC/TDS: automatic with β adjustable from 0.0 to 2.4% / °C
CalibrationpH
automatic, 1 or 2 points with 2 sets of standard buffers
(pH 4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18)
EC / TDSautomatic, 1 point at 1413 μS/cm
or 1382 ppm
automatic, 1 point at 12.88 mS/cm
or 6.44 ppt
TDS Conversion Factor adjustable, from 0.45 to 1.00
pH Electrode HI 73127 (replaceable; included)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Battery Type / Life(4) 1.5V / approx. 100 hours of continuous use,
auto-off after 8 minutes of non-use
Dimensions/Weight 163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’)/100 g (3.5 oz.)
MU
LTIP
ARA
MET
ER M
ETER
S8
88..1188 With Great Products, Come Great Results™
SPECIFICATIONS pH ORP Conductivity Temperature
Range 0.0 to 14.0 pH ±1000 mV 0 a 1999 μS/cm 0.0 to 60.0°C
Resolution 0.1 pH 1 mV 1 μS/cm 0.1°C
Accuracy(@20°C/68°F)
±0.2 pH ±5 mV ±2% F.S. ±1°C
Calibration manual, 2 points factory calibrated manual, 1 point factory calibrated
Battery Type / Life (3) 1.5V / approx. 200 hours of continuo us use
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 190 x 85 x 85 mm (7.5 x 3.3 x 3.3’’)
Weight 260 g (9.2 oz.)
ORDERING INFORMATIONHI 98204 (Water Test) is supplied with measuringcompartment, batteries and instructions.
Water Test—A Portable Water Testing laboratoryWater Test provides quick and reliable measurement of thefour most important variables in water analysis: pH, ORP,conductivity and temperature.
The lightweight and compact package makes it perfect foruse in the plant as well as the field. Superior in design andconstruction, Water Test is made of rugged VALOX® materialwhich provides excellent protection from typicalenvironmental conditions.
Water Test is engineered with such simplicity that evennon-technical personnel can use it: Fill the base of WaterTest with the sample to be measured, press "RANGE" toselect the mode and then simply read your measurement!
The rugged construction and simple operation make WaterTest perfect for use in the fields of water treatmentanalysis, waste water tests, ecological studies, aquaculture and hydroponic applications.
HI 98204
pH/ORP/EC Testerwith °C Temperature Measurement
• 4 instruments in 1• Long battery life• Lightweight with built in handle• Easy to take measurements
Carry a Water Testportable lab anywhere.
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..1199
HI 981504
pH/TDS/Temperature Monitor with 3 Extra Large, Backlit Displays
SPECIFICATIONS HI 981504
Range pH: 0.0 to 14.0; TDS: 0 to 1990 ppm; Temperature: -10.0 to 60.0°C or -14.0 to 140.0°F
Resolution pH: 0.1; TDS: 10 ppm; Temperature: 0.1°C or 0.1°F
Accuracy pH: ±0.2; TDS: ±2% F.S.; Temperature: ±0.3°C or ±0.5°F
pH Calibration Manual 2 points through trimmers
TDS Calibration Manual 1 point through trimmer
TDS Factor 0.5 (HI 981504/5) or 0.7 (HI 981504/7)
Probes pH: HI 1286 (included); TDS: HI 7634 (fixed); Temperature: Stainless steel, 2 m cable (fixed)
Temp. Compensation Automatic, 5 to 50°C (41 to 122°F), for TDS readings only
Power Supply 12 Vdc power adapter (included)
Environment 0 to 50°C (32 to 122°F); 95% RH
Dimensions/Weight 160 x 110 x 35 mm (6.3 x 4.3 x 1.4”)/560 g (1.2 lbs.)
Designed for continuousand simultaneousmonitoring of pH, TDS andtemperature.Simply install the HI 981504 above thesample to be tested, plug the instrumentin and immerse the probes. pH, TDS andtemperature measurements will besimultaneously displayed on three backlitLCDs.
Users can easily select the temperatureunit (°C or °F) through a switch on theback panel.
The HI 1286 gel-filled pH electrode isprovided with a waterproof sheath toprotect the BNC connector. The uniquedesign of the electrode provides longerlife in aggressive solutions. The HI 7634TDS probe is easy to clean and requireslittle maintenance. Measurements areaccurate and the meter can be calibratedat one or two points for pH and at a singlepoint for TDS. Temperature range isfactory calibrated.
Two models are available:
HI 981504/5 with 0.5 TDS factor
HI 981504/7 with 0.7 TDS factor
• Simultaneous display of pH, TDSand Temperature
• 3 backlit LCDs• Continuous measurements• Measure in °C or °F• Extra-large displays• 12 VDC power supply
ORDERING INFORMATIONHI 981504/5-01 (115V) and HI 981504/5-02(230V) and HI 981504/7-01 (115V) and HI 981504/7-02 (230V) is supplied with HI 1286pH electrode, pH 4 and 7 buffer sachets (20 mLea.), HI 7634 TDS probe, temperature probe, TDSsachet, (2) cleaning solution sachets, screwdriver,12 Vdc power adapter and instructions.
ELECTRODESHI 1286 Double junction, plastic body pH
electrode with 2 m (6.6’) cable and BNC connector.
SOLUTIONSHI 7004M pH 4.01 calibration solution, 250 mL
HI 70004P pH 4.01 calibration solution, 20 mL sachets (25)
HI 7007M pH 7.01 calibration solution, 250 mLHI 70007P pH 7.01 calibration solution,
20 mL sachets (25)HI 7032M 1382 ppm calibration solution, 250 mLHI 70032P 1382 ppm calibration solution,
20 mL sachets (25)HI 70442M 1500 ppm calibration solution, 250 mLHI 70442P 1500 ppm calibration solution,
20 mL sachets (25)HI 70300M Electrode storage solution, 250 mLHI 7061M Probe cleaning solution, 250 mL
ACCESSORIESHI 731326 Calibration screwdriver, (20)
MU
LTIP
ARA
MET
ER M
ETER
S8
88..22 With Great Products, Come Great Results™
Combination Metersfor Efficient Multiple Parameter Measurement
p7.4
p7.8
Research Grade Graphic Color LCDMetersHI 4521 and HI 4522 are USP compliant research-grade laboratorypH/EC and pH/ISE/EC bench meters with a backlit 240 x 320 dot-matrix color screen and millesimal measuring resolution.
“I found that HANNA provides very good service to the client.”
ANTÓNIO ÁLVARO GASPAR MONTEIROENGINEER, CEOBraitepe, LdaPortugal
Measure up to 13 Parameters, Displayup to 12 on the same screenHANNA’s new HI 9828 is a multiparameter portable instrumentthat monitors up to 13 different water quality parameters (6measured, 7 calculated). The meter has a 128 x 64 pixel dot matrixbacklit LCD that automatically sizes the digits and allows fullconfiguration of each parameter measured, units and languageselection, and on-screen graphing.
Product Spotlights
MU
LTIP
ARA
MET
ER M
ETER
S8
88..2200 With Great Products, Come Great Results™
Continuous HighAccuracy MeasurementsThe Combo HI 991404 and HI 991405series meters from HANNA are designedfor continuous, high accuracy pH,EC/TDS and temperature measurements.These microprocessor indicatorscontinuously monitor the three mostimportant nutrient parameters inhydroponics, greenhouses and horti-cultural applications with a single meter.These indicators feature a large, dual-level, backlit LCD to give youinstantaneous readings of pH, EC or TDSand temperature, even from a distance.
At startup, these indicators perform aself-check to assure proper workingcondition. The HI 991404 and HI 991405’sstability indicator and hold features letthe user know when to take readings andfreeze the display for easy and accuraterecording.
Calibration and temperature compen-sation is automatic, while the EC/TDSconversion factor and temperaturecoefficient (β) are user adjustable forapplication-specific measurements.
These instruments are supplied with anadvanced, non-clogging double junctionpH electrode and a rugged conductivityprobe that will withstand even the mostaggressive environments. The instrumentsare powered by a 12 Vdc transformer and are easy to install and use, makingthem the ideal choice for all continuousmonitoring applications.
• Waterproof• Adjustable TDS ratio• Adjustable β• Stability indicator• Extra-large display• 12 Vdc power supply
HI 991404 • HI 991405
pH/EC/TDS/Temperature Monitorswith Backlit Display
ORDERING INFORMATIONHI 991404-01 (115V) and HI 991404-02 (230V) andHI 991405-01 (115V) and HI 991405-02 (230V)are supplied complete with HI 1293D pHelectrode, fixed HI 7630 probe, pH and EC calibrationsolutions, 12 Vdc adapter and instructions.
ELECTRODESHI 7630 Conductivity probe*
HI 1293D pH electrode with DIN connector and internal matching pin
SOLUTIONSHI 7004M pH 4.01 calibration solution, 250 mL
HI 7007M pH 7.01 calibration solution, 250 mL
HI 7010M pH 10.01 calibration solution, 250 mL
HI 70030P 12.88 mS/cm calibration solution, 20 mL sachets (25)
HI 70031P 1413 μS/cm calibration solution, 20 mL sachets (25)
HI 70032P 1382 ppm calibration solution,20 mL sachets (25)
HI 70038P 6.44 ppt calibration solution,20 mL sachets (25)
HI 70442P 1500 ppm calibration solution,20 mL sachets (25)
HI 70300M Electrode storage solution, 250 mLHI 7061M Probe cleaning solution, 250 mLACCESSORIESHI 710005 115 Vac/12 Vdc pwr adapter (US)HI 710006 230 Vac/12 Vdc pwr adapter (EURO)
*Replaceable by technical personnel only.
COMBO
SPECIFICATIONS HI 991404 HI 991405
Range
pH 0.0 to 14.0 pH 0.0 to 14.0 pH
EC 0 to 3999 μS/cm 0.00 to 20.00 mS/cm
TDS 0 to 2000 ppm (mg/L) 0.00 to 10.00 ppt (g/L)
temperature 0.0 to 60.0°C / 32.0 to 140.0°F 0.0 to 60.0°C / 32.0 to 140.0°F
Resolution
pH 0.1 pH 0.1 pH
EC 1 μS/cm 0.01 mS/cm
TDS 1 ppm 0.01 ppt
temperature 0.1°C (o 0.1°F) 0.1°C (0.1°F)
Accuracy (@20°C/68°F)
pH ±0.1 pH
EC/TDS ±2% F.S.
temperature ±0.5°C (±1°F)
Temperature compensationpH: automatic; EC/TDS: automatic
with β adjustable from 0.0 to 2.4%/°C
pH Calibration pH: automatic, 1 or 2 points with 2 sets of memorized buffers
EC/TDS Calibrationautomatic, 1 point at
1413 μS/cm or 1382 ppm
automatic, 1 point at
12.88 mS/cm or 6.44 ppt
pH electrode HI 1293D (included)
EC/TDS probe HI 7630 (fixed)
EC/TDS conversion factor adjustable from 0.45 to 1.00
Environment 0 to 50°C (32 to 122°F); RH max 95%
Input impedance 1012 Ohm
Power supply 12 Vdc adapter (included)
Dimensions/Weight (meter only) 160 x 105 x 31 mm (6.3 x 4.1 x 1.2)/190 g (6.7 oz.)
®
Dual-levelBacklit LCD!
Simple and Advanced MultiparameterInstrumentsCombination instruments are the ideal solution in applicationsthat require the user to accurately test the levels of severalparameters at the same time.
HANNA’s line of combination instruments can substitute theneed for 2 or more individual meters—saving time and space.
HANNA continually devotes itself to developing new time, cost andspace saving solutions for busy laboratory and field users.
New Bench MetersHI 4521 and HI 4522are USP compliant research-grade laboratorypH/EC and pH/ISE/EC bench meters with a backlit 240 x 320 dot-matrix color screen and millesimal measuring resolution. Both meters are dual-channel and the HI 4522 also features ISEfunctionality.
Both meters can be used to perform all 3 stages of USP <645>conductivity tests for water quality and our exclusive CalibrationCheck™ diagnostics system keeps the user informed about thequality and condition of the electrode and buffer groups forcalibration.
New Portable MeterHANNA’s new HI 9828 is a multiparameter portable instrumentthat monitors up to 13 different water quality parameters (6measured, 7 calculated). The meter has a 128 x 64 pixel dotmatrix, backlit LCD that automatically sizes the digits to fit up to12 measurements on-screen at once. For monitoring and recordingdata, HI 9828 is equipped with HANNA’s exclusive Fast Tracker™– Tag Identification System: iButton©s with unique ID numberscan be installed at any number of sampling sites and are used torecord specific location information when logging. The meterincorporates comprehensive GLP features and trasferring of datavia USB connection.
For HI 9828 field calibration, HANNA’s Quick Calibration allowsusers to standardize pH, conductivity and oxygen with one solution.
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..33
Combination Metersfor Efficient Multiple Parameter Measurement
“The HI 9828 is the perfect fit in a water treatmentsystem for the production of quality fish”
MR. P. VAN DER VEENBarramundi Farming Company BVthe Netherlands
MU
LTIP
ARA
MET
ER M
ETER
S8
88..44 With Great Products, Come Great Results™
HI 4521 and HI 4522 are USP compliantresearch-grade laboratory pH/EC andpH/ISE/EC bench meters with a backlit 240x 320 dot-matrix color screen andmillesimal measuring resolution. HI 4521 isdual-channel. while HI 4522 adds ISE and issingle channel
Features include auto-logging and real-time graphic displays, auto-end pointmode and fully customizable SETUPoptions. This unit allows for automatic ormanual temperature compensation. Foraccountability, on-screen GLP datadisplays concurrent measurement readoutand logged graph data, calibrationinformation, including buffer values andexpiration date.
For ISE measurements, an ionic strengthconstant value is stored with GLP data
(HI 4522). During ISE Mode, the user hasa choice of several incremental methods.With the option to choose up to 5calibration points for pH (selected from alist of 5 custom and 8 memorized buffers),the system can be fitted to any desiredmeasuring range.
HANNA’s exclusive Calibration Check™diagnostic system keeps the userinformed about the quality and conditionof the electrode and buffers used forcalibration. An enhanced warning system,with acoustic signals, is in place to alertthe user when measuring outside thecalibration range. This system will alsoremind the user when a new calibration isdue, or when the wrong buffer is beingused during calibration. These units mayalso be given a unique ID number. The
user can consult the on-board contextualhelp from any mode simply by pressingthe HELP menu. All the features areavailable in English, Italian, French andSpanish. The two measurement channelsof HI 4521 and HI 4522 are galvanicallyisolated to eliminate instability.
Both meters can be used to perform all 3stages of USP <645> conductivity tests forwater quality. This instrument providesclear directions on how to perform eachtesting stage, automatically monitors thetemperature, conductivity and stabilityduring testing and determines whether asample is within USP limits.
These units are equipped with USB andRS232 ports for PC connectivity and a 12 Vdc power supply.
FEATURES• 240 x 320 Dot Matrix Color Display• Logging and Graphing Capabilities• USB and RS 232 for Computer
Compatibility• Auto recognition of probe type (2 or
4 ring, and nominal cell constant)• Stages 1, 2 and 3 USP mode• 3 salinity scales: Practical salinity,
Natural sea water, Percent • Linear and natural water temperature
compensation• Exclusive HANNA Calibration Check™
HI 4522 • HI 4521
Combination MeterResearch Grade Meters with Color Display, Calibration Check™ and USP
pH Calibration Check™Proper calibration of the pH meter andpH electrode system is critical in orderto achieve reliable results. HANNA’sexclusive Calibration Check™ systemincludes several features to help usersreach that goal.
EC USP ModeHANNA’s HI 4522 and HI 4521 can be used to perform all 3 stages of United StatesPharmacopeia (USP) testing requirements for water quality.
The instruments give clear instructions on how to perform each stage and automaticallycheck that the temperature, conductivity and stability are within USP limits.
Comprehensive results are shown for all stages on a single screen at the end of thetest. 200 reports can be saved for future recall.
The Right Choice in Research Grade Instruments.
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..55
Dual Channel Display
ORDERING INFORMATIONHI 4521-01 (115V) and HI 4521-02 (230V) aresupplied with 4-ring EC probe, glass body pHelectrode, temperature probe, power adapter, pH4 and pH 7 buffer solutions, electrode refillingsolution, electrode holder and instructions
HI 4522-01 (115V) and HI 4522-02 (230V) aresupplied with 4-ring EC probe, glass body pHelectrode, temperature probe, power adapter, pH4 and pH 7 buffer solutions, electrode refillingsolution, electrode holder and instructions
SOLUTIONSHI 7030L 12880 μS/cm cal. sol., 500 mLHI 7031L 1413 μS/cm calibration so., 500 mLHI 7033L 84 μS/cm calibration sol., 500 mL
HI 7034L 80000 μS/cm cal. sol., 500 mL
HI 7035L 111800 μS/cm cal. sol., 500 mL
HI 7039L 5000 μS/cm calibration sol., 500 mLHI 7037L Calibration solution, 500 mL HI 6016 pH 1.677 buffer solution, 500 mLHI 6004 pH 4.010 buffer solution, 500 mLHI 6007 pH 7.010 buffer solution, 500 mLHI 6010 pH 10.010 buffer solution, 500 mLHI 6124 pH 12.450 buffer solution, 500 mLHI 77400P pH 4 and pH 7 solution, (10)
20 mL sachets (5 ea.)ACCESSORIESHI 76404N Electrode holderHI 92000 Windows® compatible softwareHI 920013 USB cable for PC connectionHI 920010 RS232 cable for PC connectionHI 180G* Compact magnetic stirrer with
ABS plastic cover material, max 1000 rpm, Speedsafe™
HI 190M * Magnetic stirrer with ABS plastic cover material, max 1000 rpm, Speedsafe™
HI 200M * Magnetic stirrer with AISI stainlesssteel cover material, max 1000 rpm, Speedsafe™
* -1: 110/115V, 50/60Hz
-2: 220/240V, 50/60Hz
HI 4522 • HI 4521
Combination MeterResearch Grade Meters with Color Display, Calibration Check™ and USP
HI 180G
HI 190M
HI 200M
SPECIFICATIONS HI 4522 HI 4521
pH
Range -2.0 to 20.0; -2.00 to 20.00; -2.000 to 20.000 pH
Resolution 0.1 pH; 0.01 pH; 0.001 pH
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH
mV
Range ±2000 mV
Resolution 0.1 mV
Accuracy ±0.2 mV
ISE
Range 1 x 10-7 to 9.99 x 1010 concentration —
Resolution 1; 0.1; 0.01 concentration —
Accuracy ±0.5% (monovalent ions); ±1% —
Conductivity
Range0.000 to 9.999 μS/cm; 10.00 to 99.99 μS/cm; 100.0 to 999.9 μS/cm; 1.000 to 9.999
mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 999.9 mS/cm; 1000 mS/cm
Resolution 0.001 μS/cm; 0.01 μS/cm; 0.1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm
Accuracy ±1% of reading (±0.01 μS/cm)
Resistivity
Range1.00 to 99.99 Ohm•cm; 100.0 to 999.9 Ohm•cm; 1.000 to 9.999 kOhm•cm; 10.00
to 99.99 kOhm•cm; 100.0 to 999.9 kOhm•cm; 1.00 to 9.99 MOhm•cm;
10.0 to 100.0 MOhm•cm
Resolution0.01 Ohm•cm; 0.1 Ohm•cm; 0.001 kOhm•cm; 0.01 kOhm•cm; 0.1 kOhm•cm; 0.01
MOhm•cm; 0.1 MOhm•cm
Accuracy ±2% of reading (±1 Ohm•cm)
TDS
Range0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt;
10.00 to 99.99 ppt; 100.0 to 400.0 ppt
Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy ±1% of reading (±0.01 ppm)
Factor 0.40 to 1.00
Salinity
RangePractical salinity: 0.00 to 42.00; Natural seawater: 0.00 to 80.00 ppt;
Percent: 0.0 to 400.0%
Resolution 0.01 for practical salinity/natural sea water; 0.1% for percent scale
Accuracy ±1% of reading
Temperature
Range -20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Resolution 0.1°C; 0.1°F; 0.1K
Accuracy ±0.2°C; ±0.4°F; ±0.2K
Calibration
pHAutomatic up to 5 points with 8 memorized values (pH 1.68, 3.00, 4.01, 6.86,
7.01, 9.18, 10.01, 12.45) + 5 custom buffers
ISEAutomatic, up to 5 points with 6
standard + 5 custom values—
Conductivity Auto standard recognition, custom calibration solution/4 point calibration
Salinity Percent scale—1 point (with HI 7037 buffer)
Temperature 3 points
Relative mV Offset Range ±2000 mV
Input Channel(s) 1 pH/mV/ISE + 1 EC 1 pH/mV + 1 EC
Calibration Check pH electrode and buffer condition
TemperatureCompensation
pH Automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)
EC Linear and non-linear (natural water)
Log-on-demand 10 Lots, 5000 samples per lot
Auto Data Logging 10 Lots, 5000 samples per lot
PC Connection Opto-isolated USB and RS232
Display240 x 320 dot-matrix color LCD with on-screen help, graphing, language
selection and custom configuration
Power Supply 12 Vdc adapter (included)
Dimensions/Weight 159 x 230 x 93 mm (6.3 x 9.1 x 3.7”)/800 g (1.8 lbs.)
MU
LTIP
ARA
MET
ER M
ETER
S8
88..66 With Great Products, Come Great Results™
HI 255
EC/TDS/NaCl and pH/mV Meterfor Laboratories
6 in 1 Bench Meter!The HANNA HI 255 is a logging, microprocessor-based pH, ORP,Conductivity (EC), TDS, NaCl and temperature bench meter. Arelative mV feature is also provided.
pH measurements are compensated for temperature effectmanually or automatically with the HI 7662 temperature probe.
pH Calibration is possible with up to three points, using fivememorized buffers (4.01, 6.86, 7.01, 9.18 and 10.01).
The autoranging feature of the EC and TDS functionsautomatically sets the instrument to the scale with the highestpossible resolution.
Conductivity measurements are compensated, manually orautomatically, with the temperature sensor inside theconductivity probe. It is also possible to disable the temperaturecompensation and measure the actual conductivity.
The temperature coefficient is user selectable and the GLP featureprovides a guarantee of data consistency.
An alarm time-out is available to alert the user that too muchtime has elapsed since last pH calibration.
The instrument can store data for later retrieval, at the user’srequest.
Quick ResultsThis meter was designed to satisfy the requests of manyproduction and quality control laboratories that need quickmultiple parameter measurement results with a single precisioninstrument.
No InterferenceThe pH and conductivity circuits have been electrically separated,so that it is not necessary for the two probes to be simultaneouslyimmersed in the same solution. The conductivity probe will notinterfere with your pH measurements and the response of the pHelectrode is immediately stable.
With a built-in logging function, measurements are stored in non-volatile memory, and can be transferred to a PC through theRS232 serial port. In addition to these features, HI 255 containsGLP features that store the calibration and measurement data ofany sample, to be displayed upon request.
• Autoranging• Good Laboratory Practice• Logging function• PC interface
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..77
HI 255
EC/TDS/NaCl and pH/mV Meterfor Laboratories
ORDERING INFORMATIONHI 255-01 (115V) and HI 255-02 (230V) aresupplied with HI 1131B glass body, combinationpH electrode, HI 76310 conductivity /TDS probe,HI 7662 temperature probe, HI 76404 electrodeholder, pH 4 and pH 7 buffer solutions, HI 7071Selectrolyte solution, 12 Vdc power adapter andinstructions.
ELECTRODESHI 1131B Refillable pH electrode with
BNC connectorHI 76310 4-ring platinum sensor
conductivity probeHI 7662 Temperature probe
SOLUTIONSHI 6004 pH 4.010 buffer solution, 500 mL HI 6007 pH 7.010 buffer solution, 500 mL HI 6010 pH 10.010 buffer solution, 500 mLHI 7071 Electrolyte solution, 30 mL (4)HI 70300L Electrode storage solution, 500 mLHI 7030L 12880 μS/cm calibration
solution, 500 mLHI 7031L 1413 μS/cm calibration
solution, 500 mLHI 7033L 84 μS/cm calibration solution,
500 mLHI 7034L 80000 μS/cm calibration
solution, 500 mLHI 7035L 111800 μS/cm calibration
solution, 500 mLHI 7037L Salinity standard solution, 500 mL
ACCESSORIESHI 76404 Electrode holderHI 710005 115 Vac/12 Vdc pwr adapter (US)HI 710006 230 Vac/12 Vdc pwr adapter (EURO)HI 92000 Windows® compatible softwareHI 920010 Serial cable for PC connectionHI 180G* Compact magnetic stirrer with
ABS plastic cover material, max 1000 rpm, Speedsafe™
HI 190M * Magnetic stirrer with ABS plastic cover material, max 1000 rpm, Speedsafe™
HI 200M * Magnetic stirrer with AISI stainlesssteel cover material, max 1000 rpm,Speedsafe™
* -1: 110/115V, 50/60Hz
-2: 220/240V, 50/60Hz
SPECIFICATIONS HI 255
Range
pH/ORP -2.00 to 16.00 pH; -2.000 to 16.000 pH / ±699.9 mV; ±2000 mV
EC0.00 to 29.99 μS/cm; 30.0 to 299.9 μS/cm; 300 to 2999 μS/cm
3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm actual EC*
TDS0.00 to 14.99 ppm; 15.0 to 149.9 ppm; 150 to 1499 ppm
1.50 to 14.99 g/L; 15.0 to 100.0 g/L; up to 400.0 g/L actual TDS*
NaCl 0.0 to 400.0% NaCl
Temperature -10 to 120.0 °C (pH); 0.0°C to 60.0°C (EC)
Resolution
pH/ORP 0.01 pH; 0.001 pH/ 0.1 mV (±699.9 mV); 1 mV (±2000 mV)
EC 0.01 μS/cm; 0.1 μS/cm; 1 μS/cm; 0.01 mS/cm; 0.1 mS/cm
TDS 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 g/L; 0.1 g/L
NaCl 0.1% NaCl
Temperature 0.1°C
Accuracy (@20°C)
pH / ORP ±0.01 pH; ±0.002 pH/ ±0.2 mV (±699.9 mV); ±1 mV (±2000 mV)
EC ±1% of reading ±(0.05 μS/cm or 1 digit)
TDS ±1% of reading ±(0.03 ppm or 1 digit)
NaCl ±1% of reading
Temperature ±0.4°C (excluding probe error)
Relative mV Offset ±2000 mV
Calibration (pH)automatic, at 1, 2 or 3 points, with 5 memorized buffers (pH 4.01, 6.86, 7.01,
9.18, 10.01)
Calibration (EC)automatic, 1 point, with 6 memorized values
(84.0 and 1413 μS/cm; 5.00, 12.88, 80.0 and 111.8 mS/cm)
Calibration (NaCl) automatic, 1 point, with HI 7037L calibration solution
Temperature Compensationmanual or automatic, -10.0 to 120.0°C (14 to 248°F) for pH; 0.0 to 60.0°C (32 to
140°F) for EC (can be disabled for measuring actual EC and TDS values)
Temperature Coefficient 0.00 to 6.00%/°C (EC and TDS only); default value: 1.90%/C°
TDS Conversion Factor 0.40 to 0.80; default value: 0.50
pH Electrode HI 1131B (included)
EC Probe HI 76310 (included)
Temperature Probe HI 7662 (included)
PC Connection RS232 opto-isolated serial port
Data Logging 200 samples
Input Impedance 1012 Ohm
Power Supply 12 Vdc adapter (included)
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions / Weight 240 x 182 x 74 mm (9.4 x 7.2 x 2.9’’) / 1.1 kg (2.4 lbs.)HI 180G
HI 190M
HI 200M
* with temperature compensation function disabled
AutorangingThe EC and TDS scales are autoranging. The meter automatically sets the scale with thehighest possible resolution.
Good Laboratory Practice (GLP)GLP is a set of functions that allows storage and retrieval of data regarding the status ofthe electrode. All data regarding pH, Rel mV, EC and NaCl is stored for the user to reviewwhen necessary.
Logging FunctionUp to 200 LOG samples can be stored into memory.
PC InterfaceData transmission from the instrument to the PC can be done with the HI 92000Windows® compatible software (optional). HI 92000 also offers graphing and on-linehelp feature.
Probe cable available in 4, 10, 20 meter lengths. Need a different length? Give us a call!
Backlit LCD can display up to
12 Measurements at a time
Feature Highlights• Display up to 12 parameters
• Graphic LCD with backlight
• Meter features IP67 and probe features IP68 waterproof protection
• Exclusive Fast Tracker™—Tag I.D.System simplifies test logging
• Quick Calibration feature
• Built-in barometer
• Measurement check eliminates any erroneous readings
• Auto recognition of pH and ORP probe
• Logger function memorizes the data of all connected sensors
• Log-on-demand and automatic logging (up to 60,000 samples)
• Can display logged data as graphs
• USB for PC connectivity
• Auto-range of EC and TDS readings
• Good Laboratory Practice featurewith the last 5 calibrations recorded
• All sensors are field replaceable• Meter accepts both alkaline and
rechargeable batteries• Rugged probe with stainless steel
tip has a diameter under 2” for wells and pipes
HANNA’s new HI 9828 is a multiparameter portableinstrument that monitors up to 13 different waterquality parameters (6 measured, 7 calculated). Themeter has a 128 x 64 pixel dot matrix backlit LCD thatautomatically sizes the digits and allows fullconfiguration of each parameter measured, units andlanguage selection, and on-screen graphing. Eachparameter is fully supported by the on-screen contextsensitive help, both in the calibration mode andduring measurement. For monitoring and recordingdata, HI 9828 is equipped with HANNA’s exclusiveFast Tracker™ – Tag Identification System: iButton®swith unique ID numbers can be installed at anynumber of sampling sites and are used to recordspecific location information when logging. The meterincorporates comprehensive GLP features and thedownloading of data via USB connection.
Designed for outdoor environments, the meter isimpact resistant and waterproof up to IP67 standards(30 minutes immersion under 1 m of water). The multisensor probe can be left underwater (IP68 standard).
For field calibration, HANNA’s QuickCalibration allows users to standardize pH,and conductivity with one solution.
pH, pH/mV, ORP, % saturationDO, mg/L DO, EC, absolute EC,resistivity, TDS, salinity, seawaterspecific gravity, atmosphericpressure, temperature
MU
LTIP
ARA
MET
ER M
ETER
S8
88..88 With Great Products, Come Great Results™
HI 9828
Multiparameter Meterwith Intelligent Probe and Fast Tracker™ Tag Identification System
8M
ULTIPA
RAM
ETER METERS
www.hannainst.com 88..99
HI 9828
Multiparameter Meterwith Intelligent Probe and T.I.S. — Tag Identification System
Fully ConfigurableMeasurementScreen
GraphingTrend graphing may be viewed on thedisplay or copied to a PC. Select the Lot tobe displayed, select the parameter from apick list, then OK. The sample date andtime stamp will also be displayed.
PressureAtmospheric pressure calibration andmeasurement can be made in a choice ofunits.
HelpThe context sensitive help screen is alwaysaccessible.
CalibrationIn the field, the Quick Calibration feature verifies probe functionality andcalibration with a single calibrationsolution (HI 9828-25). Simply screw thecalibration beaker filled with solutiononto the probe, select “Quick calibration”from the menu and press OK. Individualcalibration may also be performed usingmultiple calibration points.
“Instead of walking around withseveral different meters, I only needto carry one!”
MR. F. BRABANDERKwekerij de Singel the Netherlands
top related