patterned media technology an equipment perspective
Post on 03-Feb-2022
1 Views
Preview:
TRANSCRIPT
PATTERNED MEDIA TECHNOLOGY
An Equipment Perspective
Ren XuSeptember 17-18, 2008
Think Lean. Create Value.
Jan 2008_Needham_Slide 2Intevac–DiskConUSA2008 Slide 2Think Lean. Creat4e Value.
Outline
2008 StatusBPM/DTR Pilot/MFG LineProcesses ApproachEquipment Technology
Key Drivers of Current Equipment TrendThroughput—Cost—Platform—ModuleMedia Process Development
Intevac Strategy200L Gen II PlatformModular Approach to Key Process CapabilitiesHW—Modular Demo’s—Platform Test Bed—Customer Site Installations—Process Development/Validation—Ramping
Summary and Outlook
Jan 2008_Needham_Slide 3Intevac–DiskConUSA2008 Slide 3Think Lean. Creat4e Value.
Current StatusInitial Discrete-Track Recording (DTR) and/or Bit-Patterned Media (BPM) 2.5” Disk Development
Nano Imprint Lithography Resist Pattern IBE/RIE/Wet-Etch/ Ion Implantation of Substrate/SUL/Magnetic Layers
Magnetic Layer Patterning Test Via Two Routes:Physical patterning of Mag layer/SUL/substrate (etch)Chemical patterning of Mag layer by doping (implantation)
Fully Functional DTR/BPM Disks From Manufacturing-Capable Equipment Line is Essential to DTR/BPM Drive Product Development
Key Missing Link: Manufacturable Process at High DPH, High Reliability Equipment Line-Up Enabling Development/ Production of Fully Finished, Flyable, Guzik Testable Disks
Jan 2008_Needham_Slide 4Intevac–DiskConUSA2008 Slide 4Think Lean. Creat4e Value.
Pilot/Manufacturing Line Outlook
Clean Substrate
Cont. Media(200L Gen II)
SeedLULIL
Multiple MagLCOC
Vapor Lube
(AccuLuber)
Glide Test(Burnishing
Pass, GlideHeight
Test)
Bonding(UV,
Thermal)Certification
Test
Shipment
BurnishNano ImprintLithography
(LithoPrime)
QA
Lean DTR/BPM(Patterning)
De-Scum/TrimHard Mask
EtchResist Strip
Mag Stack EtchPlanarization
COC
Continuous Media Proc/Eqpt Bit Patterned MediaNano Imprint Lithography
Jan 2008_Needham_Slide 5Intevac–DiskConUSA2008 Slide 5Think Lean. Creat4e Value.
Key Equipment Trend Drivers
Process Development for Advanced Continuous Media
Patterning Approaches (Cap, NIL, Etching Strategy, Planarization, HDI)
Winning DTR/BPM Process Approach: Manufacturable, Cost Effective, and Scalable
Equipment Platform, Module, Throughput, Cost
All Encompassing, Universal Enabler for Industry-Wide Process Development and Technology Evolution
Jan 2008_Needham_Slide 6Intevac–DiskConUSA2008 Slide 6Think Lean. Creat4e Value.
DTR/BPM Challenges: Product Cost
Throughput Identified as the Main Per-Disk Cost Driver
Impact of Equipment Cost Diminishes at Sufficiently High Throughput
Model Basis: 15M/QTR Capacity at 1.5M Disks/Line
Cost/DPH
New Eqpt (M$)
Base DPH
No. Tool Per Line
CapitalCost (M$)
Substrate Cost
PMR BOM
PMR Eqpt
NewEqpt Labor Facilities
Total Cost
H/L 15 12 83 1250 1.75$ 1.46$ 0.55$ 34.72$ 0.48$ 0.15$ 39.11$ L/L 5 12 83 417 1.75$ 1.46$ 0.55$ 11.57$ 0.48$ 0.15$ 15.96$ H/M 15 120 8 125 1.75$ 1.46$ 0.55$ 3.47$ 0.11$ 0.04$ 7.38$ L/M 5 120 8 42 1.75$ 1.46$ 0.55$ 1.16$ 0.11$ 0.04$ 5.07$ H/H 15 1000 1 15 1.75$ 1.46$ 0.55$ 0.42$ 0.07$ 0.03$ 4.28$ L/H 5 1000 1 5 1.75$ 1.46$ 0.55$ 0.14$ 0.07$ 0.03$ 4.00$
PMR PMR 0 1000 0 0 1.75$ 1.46$ 0.55$ -$ 0.04$ 0.02$ 3.82$
DTR/BPM Assumptions Per Disk Cost Base and Cost Adder
DTR
and
BPM
Cat
egor
y
Cost/DPH
New Eqpt (M$)
Base DPH
No. Tool Per Line
CapitalCost (M$)
Substrate Cost
PMR BOM
PMR Eqpt
NewEqpt Labor Facilities
Total Cost
H/L 15 12 83 1250 1.75$ 1.46$ 0.55$ 34.72$ 0.48$ 0.15$ 39.11$ L/L 5 12 83 417 1.75$ 1.46$ 0.55$ 11.57$ 0.48$ 0.15$ 15.96$ H/M 15 120 8 125 1.75$ 1.46$ 0.55$ 3.47$ 0.11$ 0.04$ 7.38$ L/M 5 120 8 42 1.75$ 1.46$ 0.55$ 1.16$ 0.11$ 0.04$ 5.07$ H/H 15 1000 1 15 1.75$ 1.46$ 0.55$ 0.42$ 0.07$ 0.03$ 4.28$ L/H 5 1000 1 5 1.75$ 1.46$ 0.55$ 0.14$ 0.07$ 0.03$ 4.00$
PMR PMR 0 1000 0 0 1.75$ 1.46$ 0.55$ -$ 0.04$ 0.02$ 3.82$
DTR/BPM Assumptions Per Disk Cost Base and Cost Adder
DTR
and
BPM
Cat
egor
y
Jan 2008_Needham_Slide 7Intevac–DiskConUSA2008 Slide 7Think Lean. Creat4e Value.
Process Approach & Equipment Technology
ProcessContinuous Media, Full Stack Mag-Layer NIL Resist Pattern Finished DTR/BPM Disk, Full Stack and Flyable/TestableKey New Processes: – De-Scum/Trim/Resist Strip– Sputtered Carbon/Metal Hard Mask Etch – Mag-Stack Etch– Carbon/Metal or Oxide Dep/Etch/Dep/Etch...Planarization
Process ModulesICP Source: De-Scum/Trim/StripMagnetic Layer Hard Etch: IBE/RIE and OthersPlanarization: – Carbon: Sputter Carbon + Reactive Etch Back– Oxide/Metal: RF/DC Sputter + Etch Back
System200 Lean Gen II Platform Incorporating New SourcesProgressive, Approach/Match Current 200 LEAN Gen II Throughput
Jan 2008_Needham_Slide 8Intevac–DiskConUSA2008 Slide 8Think Lean. Creat4e Value.
200 Lean - BPM Process and Tool Configuration
Media Process DrivesMedia Process DrivesTool Configuration DrivesTool Configuration DrivesModule/EquipmentModule/EquipmentTechnology DevelopmentTechnology Development
Jan 2008_Needham_Slide 9Intevac–DiskConUSA2008 Slide 9Think Lean. Creat4e Value.
PMR and Patterned Media Process Steps
PatterningDTR/BPM200 Lean® Gen II• De-Scum/Trim• C-Hard Mask• Resist Strip• Etch• Planarization
Clean Substrate
Plate
PolishPolish
Clean
Texture(not needed with PMR)
Clean
Sputter200 Lean®• SeedL• UL• IL• Multiple MagL• COC
Nano Imprint LithographyLithoPrime™
Vapor LubricationAccuLuber™
GlideCertify
QAShipment
Blank
(TB) Tape Burnish
UV Bonding
Jan 2008_Needham_Slide 10Intevac–DiskConUSA2008 Slide 10Think Lean. Creat4e Value.
Intevac Commitment to the HDD Industry
PMR Ramp and DTR/BPM Transition
Committed to Making 200 Lean Extendible to All PMR, HAMR and Patterned Media Technology Generations
Focused on Continuous Technology Advancement and Cost Effectiveness
Enabling New Media Technology
top related