product information drummotors - welkom op bij van der … · 2014-06-26 · product information...
Post on 27-Jul-2018
221 Views
Preview:
TRANSCRIPT
Product information
Drummotors
www.v a n d e r g r a a f p t e . n l
Van der GraafPower Transmission Equipment
2
Introduction 4
Productoverview 5
Sealingsandoil 6
Options 7
ProductoverviewTM100B25 8 Dimensions 9
Cable exit 11
Brackets drawings 12
ProductoverviewTM113B25 13 Dimensions 14
Cable exit 16
Brackets drawings 17
ProductoverviewTM127-25 18 Dimensions drummotors 19
Dimensions taildrums 21
Cable exit 23
Bracket drawings 24
ProductoverviewTM138-25 25 Dimensions drummotors 26
Dimensions taildrums 28
Cable exit 30
Bracket drawings 31
ProductoverviewTM160-25 32 Dimensions drummotors 33
Dimensions taildrums 35
Cable exit 37
Bracket drawings 38
ProductoverviewTM160-30 39 Dimensions drummotors 41
Dimensions taildrums 43
Cable exit 45
Bracket drawings 46
ProductoverviewTM215-30 47 Dimensions drummotors 49
Dimensions taildrums 51
Cable exit 53
Bracket drawings 54
Index
3
ProductoverviewTM215-40 55 Dimensions drummotors 56
Dimensions taildrums 58
Cable exit 60
Bracket drawings 61
ProductoverviewTM215B50 62 Dimensions 63
Cable exit 64
ProductoverviewTM273-40 65 Dimensions drummotors 66
Dimensions taildrums 67
Cable exit 68
Bracket drawings 69
ProductoverviewTM315-40 70 Dimensions drummotors 72
Dimensions taildrums 74
Cable exit 76
Bracket drawings 77
ProductoverviewTM315-50 78 Dimensions drummotors 79
Dimensions taildrums 81
Cable exit 83
Bracket drawings 84
ProductoverviewTM400-50 85 Dimensions 86
Cable exit 87
ProductoverviewTM400-60 88 Dimensions drummotors 89
Dimensions taildrums 90
Cable exit 91
Bracket drawings 92
ProductoverviewTM500A75 96 Dimensions 97
Cable exit 98
ProductoverviewTM620A75 99 Dimensions 100
Cable exit 101
Contactus 102
4
Van der Graaf, known internationally for its reliability and quality, is a family organization
with its head office in Vollenhove, Netherlands.
Top quality and professional service have allowed Van der Graaf to maintain their world
leading position in the power transmission industry. With product applications worldwide,
Van der Graaf still maintains its down to earth priciple:
Not just a superior product, but also superior service!
A family business
Introduction
5
Our products:An overviewDrummotortype TM100B25 TM113B25 TM127.25 TM138.25 TM160.25 TM160.30 TM215.30 TM215.40 TM215B50Drum diameter (mm) 100 113 127 138 160 215 273 315 400
Shaft diameter (mm) 25 25 25 25 25 30 30 40 50
Power (kW) 0.05-0.37 0.04-0.55 0.10-1.1 0.10-1.1 0.10-0.75 0.10-2.2 0.10-2.2 0.37-5.5 1.5-4.0
Speed (m/s) 0.007-3.60 0.033-4.40 0.008-2.60 0.009-2.80 0.13-3.30 0.06-4.00 0.08-5.30 0.12-4.70 0.18-0.31
Drummotortype TM273.40 TM315.40 TM315.50 TM400.50 TM400.60 TM500.60 TM500A75 TM620A75
Drum diameter (mm) 273 315 315 400 400 500 500 620
Shaft diameter (mm) 40 40 50 50 60 60 75 75
Power (kW) 0.37-5.5 0.37-5.5 1.1-11 1.1-11 1.5-22 1.5-22 11-30 11-30
Speed (m/s) 0.16-4.95 0.18-5.20 0.16-4.40 0.20-4.80 0.20-4.20 0.25-4.40 0.80-3.20 1.00-3.90
Design benefits
- Robust, industrial design
- Fully enclosed
- Oil filled
- Oversized gears and bearings
Installation advantages
- Easy to install
- Compact and reliable
- Easy to clean
- Virtually maintenance free
- Low Life Cycle Costs
Productoverview
6
This is Van der Graaf’s standard sealing.
This type of sealing will work in most
conditions.
This is our standard sealing for stainless
steel drummotors, a very effective, self
lubricating multi labyrinth sealing.
The standard oil in a “GV” drummotor is Castrol Alpha SP 100. If the oil needs replacing, it is important that it conforms to ISO VG 100
standards.
For use in the food industry, the drummotor can be filled with Castrol Optileb GT150. This is a synthetic food grade oil.
If the drummotor is fitted with a Wet Brake (recognisable by WB in the type-number) or a Clutch Brake (CB), it will be filled with Castrol
Agri-trans plus 10W30. Or, in the food industry, with Castrol Vitalube HS68. Both are synthetic oils.
In low temperature environments (-40°C) the drummotor is filled with Vitalube HS32.
Oil equivalents are mentioned in our manual.
This sealing is specifically designed for
those applications where high water
pressure is used for cleaning.
This sealing is suitable for under water
applications. The maximum depth is
approx 2,5 m.
This sealing is designed for abrasive
applications, like sand, gravel and soil.
RB sealing - IP 66
CR sealing - IP 66
RBS sealing - IP 66
UW sealing - IP 68
HD sealing - IP 66
Sealings for mild steel drummotors
Sealings for stainless steel drummotors
Oil
Sealingsandoil
7
Specification Standard Optional
ExecutionShafts and bolts Mild steel Stainless steel (316)
End caps Cast iron Stainless steel (304 or 316)
Shell Mild steel Stainless steel (304 or 316)
Junction box Cast iron(TM 100 and TM 113
polyamide)
Polyamide, stainless steel
Cable Shielded or non-shielded
Sealing RB RBS, HD, CR, UW
ShellCrowned •
Cilindrical •
Balanced •
Lagging, cold vulcanised •
Lagging, hot vulcanised •
Lagging, FDA approved •
Fitted with grooves, patterns •
Sprockets •
ElectromotorThree-fase asynchronous •
Power ≤ 3 kW 230/400 V - 50 Hz Other powers and frequencies on request
Power > 3 kW 400/690 V - 50 Hz
Single fase 230 V - 50 Hz TM 100 and TM 113
Two speed (Dahlander) •
Twin drive (double power) •
Insulation class F H
UL, CSA C US •
ATEX II 3D T135° C •
Thermal protection Clixon or PTC
Run by frequency inverter •
OtheroptionsFood grade oil •
Backstop, mechanical •
Brake, electro mechanical(minimum facewidth increases by 100 mm)
•
Clutch brake, electro mechanical •
Inclined or vertical position •
Other facewidth’s •
Different shaft executions •
Encoder or sensor bearing •
When an electro-mechanical brake is fitted, the minimum facewidth is increased. See specific drummotor for detailed information.
The total weight of a drummotor grows approx. 4,5 kg. per 100 mm.
Available torque: (Beltpull N x Drumdiameter m)/2 Nm.
Options
8
ProductoverviewTM100B25TYPE
TM100B25PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=350
205 Z 0,373,6095
2,80120
2,50135
2,20155
2,00175
1,70205
310 0,85 14
405 Z
0,18
1,8095
1,40120
1,25135
1,10155
1,00175
0,85205
310
0,60 14425 PL20,75220
0,70235
0,55300
0,50330
0,40415
0,36460
0,30550
0,24690
310
425 PL30,20835
0,16990
0,141130
0,121300 360
416 Z
0,12
1,10105
1,00115
0,85135
275
0,40 14416 PL20,75145
0,70160
0,55200
0,50220
0,40275
0,36305
0,30370
0,24460
275
416 PL30,20530
0,16660
0,14755
0,12880
0,101055
0,091175
310
616 Z
0,12
1,2590
1,10105
0,90125
0,80145
0,70165
0,60190
310
0,50 14616 PL20,50220
0,40275
0,36305
0,30370
0,26425
0,19580
0,15735
310
616 PL30,071300 360
414 Z
0,10
1,1085
1,0095
0,85110
260
0,40 14414 PL20,75125
0,70130
0,55165
0,50185
0,40230
0,36255
0,30305
0,24385
260
414 PL30,20440
0,16550
0,14630
0,12735
0,10880
0,09980
0,061300 310
611 Z
0,08
0,8095
0,70110
0,60125
260
0,40 14611 PL20,50145
0,40185
0,36205
0,30245
0,26285
0,19385
0,15490
260
611 PL30,13540
0,10705
0,071005
0,061175
310
811 PL2
0,08
0,22335
0,17435
0,14525
0,11670
310
0,55 14
811 PL30,09780
0,051300 360
807 PL3
0,05
0,07630
0,06735
0,05880
0,041100
0,0281300 360
0,40 14
807 PL40,0221300
0,0201300
0,0191300
0,0171300
0,0141300
0,0131300
0,0121300
0,0111300
0,0091300
0,0071300 410
Available standard facewidth’s: 260 - 275 - 310 - 360 - 410 - 460 - 510 - 560 - 610 - 660 - 710 - 760 - 810 - 860 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 75 mm. The total weight of a drummotor grows approx. 1,6 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 65 Nm)Beltpull max.: 1300 N (Imax upon request or on dataplate)
TM 100B25 |
9
Dimensions
TM100B25
KT100B25
TM 100B25, mildsteel drummotor with polyamide terminal box
KT 100B25, mildsteel taildrum
Width : 80
TM 100B25 |
10
TM100B25CR(RVS)
KT100B25CR(RVS)
TM 100B25 CR, stainless steel drummotor with polyamide terminal box and CR sealing
KT 100B25 CR, stainless steel taildrum with CR sealing
Width : 80
TM 100B25 |
11
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 100B25 is with a polyamide terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 100B25 |
12
Bracketsdrawings
AB20
AB20RVS
AB 20, cast iron or steel bracketcast iron or steel bracket
AB 20 RVS, stainless steel bracket
TM 100B25 |
13
ProductoverviewTM113B25TYPE
TM113B25PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=350
275 Z 0,554,40110
4,00125
3,20155
2,80175
2,50195
2,20225
1,90255
310 1,20 16
205 Z 0,374,4080
4,0090
3,20110
2,80125
2,50140
310 0,8 16
405 Z
0,37
2,20160
2,00175
1,60220
1,40250
1,25280
1,10320
0,95370
0,75470
0,60585
360 1,35 16
405 PL20,85400
0,70485
0,65525
0,55620
0,50680
0,45755
0,40850
0,341000
0,271150
234 Z 0,254,4055
4,0060
3,2075
2,8085
2,5095
260 0,65 16
434 Z
0,25
2,20110
2,00120
1,60150
1,40170
1,25190
1,10215
0,95250
310 0,70 16
434 PL20,85270
0,75305
0,70330
0,65355
0,55420
0,50460
0,45510
0,40575
0,34675
0,27850
634 Z
0,25
1,00240
0,90265
0,80295
0,70340
0,60395
0,50475
0,40595
360 0,95 16
634 PL20,29795
0,25920
0,211095
0,171150
425 Z
0,18
1,60105
1,40120
1,25135
1,10155
0,95180
275
0,55 16425 PL20,85195
0,75220
0,70235
0,65255
0,55300
0,50330
0,45370
0,40415
0,34485
0,27615
425 PL30,20790
0,18880
0,16990
0,131150
0,111150 310
625 Z 0,180,90190
0,80214
0,70244
0,60285
310 0,65 16
625 PL20,25660
0,21790
0,17975
416 Z 0,121,10105
0,95120
260
0,40 16416 PL20,85130
0,75145
0,70160
0,65170
0,55200
0,50220
0,45245
0,40275
0,34325
0,27410
416 PL30,18585
0,11960
0,071150 310
816 PL2 0,120,31355
0,22500
0,20550
0,16690
0,13850
310
0,65 16
816 PL30,101055
0,081150 360
811 PL2 0,080,31235
0,26285
0,22335
0,20370
0,16460
0,13565
260
0,45 16
811 PL30,10705
0,08880
0,071005
0,061150
0,051150 310
807 PL3 0,050,06735
0,05880
0,0331150 310
0,30 16
807 PL40,0251150
0,0231150
0,0211150
0,0191150
0,0161150
0,0151150
0,0131150
0,0121150
0,0101150
0,0081150 360
805 PL3 0,040,10350
0,08440
0,07505
0,06585
0,05705
0,0331065
285 0,25 16
Available standard facewidth’s: 260 - 275 - 310 - 360 - 410 - 460 - 510 - 560 - 610 - 660 - 710 - 760 - 810 - 860 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 75 mm. The total weight of a drummotor grows approx. 1,8 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 65 Nm)Beltpull max.: 1150 N (Imax upon request or on dataplate)
TM 113B25 |
14
Dimensions
TM113B25
KT113B25
TM 113B25, mildsteel drummotor with polyamide junction box
KT 113B25, mildsteel taildrum
Width : 80
TM 113B25 |
15
TM113B25CR(RVS)
KT113B25CR(RVS)
TM 113B25 CR, stainless steel drummotor with polyamide junction box and CR sealing
KT 113B25 CR, stainless steel taildrum and CR sealing
Width : 80
TM 113B25 |
16
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 113B25 is with a polyamide terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the execution of the cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 113B25 |
17
Bracketsdrawings
AB20
AB20RVS
AB 20, cast iron or steel bracket
AB 20 RVS, stainless steel bracket
TM 113B25 |
18
ProductoverviewTM127-25TYPE
TM 127.25Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=350
415 Z 1,11,30805
1,001045
325 350 2,8 21
210 Z 0,752,60275
2,00355
1,70420
300 325 1,7 20
410 Z
0,75
1,30550
1,00715
0,85840
0,651095
0,501425
300 325
1,9 20
410 PL20,302300
0,242875
0,203450
0,164100
350 375
275 Z 0,552,60200
2,00260
1,70305
275 300 1,1 18
475 Z
0,55
1,30400
1,00525
0,85615
0,65805
0,501045
0,401305
275 300
1,3 18
475 PL20,301685
0,242110
0,202530
0,163165
325 350
205 Z 0,372,60135
2,00175
1,70205
250 275 0,9 17
405 Z
0,37
1,30270
1,00350
0,85415
0,65540
0,50705
0,40880
0,321100
275 300
1,0 17405 PL20,201700
0,162130
325 350
405 PL30,0464100
0,0364100
0,0314100
0,0244100
375 400
605 Z
0,37
0,251405
275 300
1,1 18
605 PL20,142430
0,113095
325 350
434 Z 0,251,30185
1,00240
0,85280
0,65365
0,50475
0,40595
0,32740
250 275 0,7 16
834 Z 0,250,25950
0,201190
0,161485
275 300
1,0 18834 PL20,121915
0,102300
0,082875
325 350
834 PL30,0234100
0,0184100
0,0154100
0,0124100
375 400
825 Z 0,180,25685
0,20855
0,161070
275 300 0,8 17
818 Z 0,130,25495
0,20620
0,16770
250 275 0,6 16
1218 Z
0,13
0,121030
0,101235
300 325
0,9 201218 PL20,081495
0,071710
0,052390
350 375
1218 PL30,0154100
0,0124100
0,0104100
0,0084100
400 450
1213 Z 0,100,12790
0,10950
275 300 0,6 18
Available standard facewidth’s: 250 - 275 - 300 - 325 - 350 - 375 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 1,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 260 Nm)Beltpull max.: 4100 N (Imax upon request or on dataplate)
TM 127-25 |
19
Dimensionsdrummotors
TM127A25
TM127B25
TM 127A25, mildsteel drummotor with cast iron junction box
TM 127B25, mildsteel drummotor with cast iron junction box
Width : 80
Width : 80
TM 127-25 |
20
TM127A25CR(RVS)
TM127B25CR(RVS)
TM 127A25 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 127B25 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 80
Width : 80
TM 127-25 |
21
Dimensionstaildrums
KT127A25
KT127B25
KT 127A25, mildsteel taildrum
KT 127B25, mildsteel taildrum
TM 127-25 |
22
KT127A25CR(RVS)
KT127B25CR(RVS)
KT 127A25 CR, stainless steel taildrum with CR sealing
KT 127B25 CR, stainless steel taildrum with CR sealing
TM 127-25 |
23
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 127-25 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 127-25 |
24
Bracketdrawings
AB25
AB25RVS
AB 25, cast iron or steel bracket
AB 25 RVS, stainless steel bracket
TM 127-25 |
25
ProductoverviewTM138-25TYPE
TM138.25PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=350
415 Z 1,11,40745
1,10950
325 350 2,8 23
210 Z 0,752,80255
2,20325
1,80395
300 325 1,7 22
410 Z
0,75
1,40510
1,10650
0,90790
0,701015
0,551295
300 325
1,9 22
410 PL20,322155
0,262655
0,223135
0,173800 350 375
275 Z 0,552,80185
2,20240
1,80290
275 300 1,1 20
475 Z
0,55
1,40375
1,10475
0,90580
0,70745
0,55950
0,451160
275 300
1,3 20
475 PL20,321580
0,261945
0,222300
0,172975
325 350
205 Z 0,372,801.25
2,20160
1,80195
250 275 0,9 19
405 Z
0,37
1,40250
1,10320
0,90390
0,70500
0,55640
0,45780
0,351005
275 300
1,0 19405 PL20,221545
0,172000
325 350
405 PL30,0503800
0,0393800
0,0333800
0,0263800 375 400
605 Z
0,37
0,271300
275 300
1,1 20
605 PL20,152270
0,122835
325 350
434 Z 0,251,40170
1,10215
0,90265
0,70340
0,55430
0,45530
0,35680
250 275 0,7 18
834 Z
0,25
0,27880
0,221080
0,171395
275 300
1,0 20834 PL20,131770
0,112090
0,092555
325 350
834 PL30,0253800
0,0193800
0,0163800
0,0133800 375 400
825 Z 0,180,27635
0,22775
0,171005
275 300 0,8 19
818 Z 0,130,27455
0,22560
0,17725
250 275 0,6 18
1218 Z
0,13
0,13950
0,111125
300 325
0,9 221218 PL20,091330
0,081495
0,061995
350 375
1218 PL30,0163800
0,0133800
0,0113800
0,0093800 400 450
1213 Z 0,100,13730
0,11865
275 300 0,6 20
Available standard facewidth’s: 250 - 275 - 300 - 325 - 350 - 375 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 2,0 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 260 Nm)Beltpull max.: 3800 N (Imax upon request or on dataplate)
TM 138-25 |
26
Dimensionsdrummotors
TM138A25
TM138B25
TM 138A25, mildsteel drummotor with cast iron junction box
TM 138B25, mildsteel drummotor with cast iron junction box
Width : 80
Width : 80
TM 138-25 |
27
TM138A25CR(RVS)
TM138B25CR(RVS)
TM 138A25 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 138B25 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 80
Width : 80
TM 138-25 |
28
Dimensionstaildrums
KT138A25
KT138B25
KT 138A25, mildsteel taildrum
KT 138B25, mildsteel taildrummildsteel taildrum
TM 138-25 |
29
KT138A25CR(RVS)
KT138B25CR(RVS)
KT 138A25 CR, stainless steel taildrum with CR sealing
KT 138B25 CR, stainless steel taildrum with CR sealing
TM 138-25 |
30
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 138-25 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 138-25 |
31
Bracketdrawings
AB25
AB25RVS
AB 25, cast iron or steel bracket
AB 25 RVS, stainless steel bracket
TM 138-25 |
32
ProductoverviewTM160-25TYPE
TM 160.25Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=350
210 Z 0,753,30215
2,50285
2,20325
1,60445
0,95750
0,80890
300 350 1,7 25
410 Z 0,751,70420
1,25570
1,10650
0,651095
300 350 1,9 25
275 Z 0,553,30160
2,50210
2,20240
1,60325
0,95550
300 300 1,1 23
475 Z 0,551,70305
1,25420
1,10475
0,80655
0,65805
0,501045
300 300 1,3 23
205 Z 0,373,30105
2,50140
2,20160
1,60220
0,95370
300 300 0,9 22
405 Z 0,371,70205
1,25280
1,10320
0,80440
0,65540
0,50705
0,40880
300 300 1,0 22
605 Z 0,370,311135
300 300 1,1 23
434 Z 0,251,70140
1,25190
1,10215
0,80295
0,65365
0,50475
0,40595
300 300 0,7 21
834 Z 0,250,31765
0,25950
0,201190
300 300 1,0 23
825 Z 0,180,31550
0,25685
0,20855
300 300 0,8 22
818 Z 0,130,31400
0,25495
0,20620
300 300 0,6 21
1218 Z 0,130,15825
0,13950
300 350 0,9 25
1213 Z 0,100,15635
0,13730
300 300 0,6 23
Available standard facewidth’s: 300 - 350 - 400 - 425 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 2,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 260 Nm)
TM 160-25 |
33
Dimensionsdrummotors
TM160A25
TM160B25
TM 160A25, mildsteel drummotor with cast iron junction box
TM 160B25, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 160-25 |
34
TM160A25CR(RVS)
TM160B25CR(RVS)
TM 160A25 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 160B25 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 160-25 |
35
Dimensionstaildrums
KT160A25
KT160B25
KT 160A25, mildsteel taildrum
KT 160B25, mildsteel taildrum
TM 160-25 |
36
KT160A25CR(RVS)
KT160B25CR(RVS)
KT 160A25 CR, stainless steel taildrum with CR sealing
KT 160B25 CR, stainless steel taildrum with CR sealing
TM 160-25 |
37
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 160-25 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 160-25 |
38
Bracketdrawings
AB25
AB25RVS
AB 25, cast iron or steel bracket
AB 25 RVS, stainless steel bracket
TM 160-25 |
39
ProductoverviewTM160-30TYPE
TM 160.30Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=350
230
2,20
4,00520
3,40615
2,80745
2,60805
2,10995
1,701230
400 450 5,6 32230 Z1.401495
230 ZV1,301610
1,201740
1,151815
1,002090
0,902320
0,852460
0,802610
220
1,50
4,00355
3,40420
2,80510
2,60550
2,10680
1,70840
350 400 3,3 31220 Z1,401020
1,301095
1,201190
1,151240
1,001425
220 ZV0,901585
0,851675
0,801780
420
1,50
2,50570
2,10680
1,80790
1,60890
1,301095
1,101295
400 450 3,7 32
420 ZV0,851675
0,801780
0,751900
0,702035
0,652190
0,602375
0,552590
415
1,10
2,00525
1,70615
1,40745
1,25835
1,10950
0,851230
350 400 2,8 31415 Z0,701495
415 ZV0,651610
0,601740
0,551900
0,502090
0,452320
0,402615
410
0,75
2,00355
1,70420
1,40510
1,25570
1,10650
0,85840
0,75950
0,701020
350 400
1,9 30
410 Z0,651095
0,601190
0,551295
0,501425
410 ZV0,451585
0,401780
0,342095
410 PL20,272555
0,233000
400 425
475
0,55
2,00260
1,70305
1,40375
1,25420
1,10475
0,85615
0,75695
0,70745
0,55950
350 400
1,6 29
475 Z0,501045
0,451160
0,401305
0,341535
475 ZV0,311685
475 PL20,182810
400 425
675
0,55
0,95550
0,60870
350 400 1,6 31675 Z0,371410
675 ZV0,291800
0,271935
0,232270
TM 160-30 |
40
TYPETM 160.30
PowerkW
Beltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=350
605
0,37
1,40250
1,10320
0,95370
0,85415
0,70500
0,60585
0,50705
0,45780
0,351005
350 400
1,4 30
605 Z0,301170
0,291210
0,271300
605 ZV0,231530
0,201760
605 PL20,181890
0,152270
0,122835
400 425
634
0,25
1,40170
1,10215
0,95250
0,85280
0,70340
0,60395
0,50475
0,45530
0,35680
0,30790
350 400 0,9 29
634 Z0,29820
0,27880
0,231035
0,201190
834
0,25
1,00240
0,65365
0,55430
0,40595
0,26915
350 400
1,0 31834 Z0,171395
0,151585
834 PL20,141645
0,121915
0,092555
400 425
825
0,18
1,00170
0,85200
0,70245
0,65265
0,55310
0,40430
0,35490
0,26660
0,23745
350 400 0,9 30
825 Z0,20855
0,171005
0,151140
818
0,13
1,00125
0,85145
0,70175
0,65190
0,55225
0,40310
0,35355
0,26475
0,23535
350 400 0,6 29
818 Z0,20620
0,17725
0,15825
1218
0,13
0,45275
0,33375
350 400
0,9 311218 Z0,13950
0,111125
0,101235
1218 PL20,091330
0,071710
0,061995
400 425
1213
0,10
0,65145
0,55175
0,45210
0,40240
0,33290
0,27350
0,24395
0,22430
0,17560
0,14680
350 400 0,8 30
1213 Z0,13730
0,11865
0,10950
Available standard facewidth’s: 350 - 400 - 425 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 2,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 260 Nm)
TM 160-30 |
41
Dimensionsdrummotors
TM160A30
TM160B30
TM 160A30, mildsteel drummotor with cast iron junction box
TM 160B30, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 160-30 |
42
TM160A30CR(RVS)
TM160B30CR(RVS)
TM 160A30 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 160B30 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 160-30 |
43
Dimensionstaildrums
KT160A30
KT160B30
KT 160A30, mildsteel taildrum
KT 160B30, mildsteel taildrum
TM 160-30 |
44
KT160A30CR(RVS)
KT160B30CR(RVS)
KT 160A30 CR, stainless steel taildrum with CR sealing
KT 160B30 CR, stainless steel taildrum with CR sealing
TM 160-30 |
45
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 160-30 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 160-30 |
46
Bracketdrawings
AB30
AB30RVS
AB 30, cast iron or steel bracket
AB 30 RVS, stainless steel bracket
TM 160-30 |
47
ProductoverviewTM215-30TYPE
TM 215.30Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=500
230
2,20
5,30395
4,50460
3,70565
3,40615
2,80745
400 450 5,6 48
230 ZV1,901100
1,701230
1,601305
1,501395
1,401495
1,201745
220
1,50
5,30270
4,50315
3,70385
3,40420
2,80510
2,30620
350 400 3,1 47
220 Z1,90750
1,70840
1,60890
1,50950
1,401020
1,201190
1,101295
420
1,50
3,30430
2,80510
2,40595
2,10680
1,70840
1,50950
400 450 3,7 48420 Z1,101295
1,001425
420 ZV0,901585
0,851675
0,801780
0,702035
415
1,10
2,70385
2,30455
1,90550
1,70615
1,40745
1,20870
350 400 2,8 47415 Z0,901160
0,851230
0,801305
0,751395
415 ZV0,651610
0,601725
0,551900
410
0,75
2,70265
2,30310
1,90375
1,70420
1,40510
1,20595
1,00715
0,90790
350 400
1,9 46
410 Z0,85840
0,80890
0,75950
0,651095
0,601190
0,551295
410 ZV0,451585
410 PL 20,361915
0,302300
400 425
475
0,55
2,70195
2,30225
1,90275
1,70305
1,40375
1,20435
1,00525
0,90580
0,70745
350 400
1,6 45475 Z0,65805
0,60870
0,55950
0,451160
0,401305
475 PL 20,242110
400 425
675
0,55
1,25420
0,75695
350 400 1,6 47675 Z0,501045
0,381375
0,361450
675 ZV0,301740
TM 215-30 |
48
TYPETM 215.30
PowerkW
Beltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=500
605
0,37
1,80195
1,50235
1,25280
1,20295
0,90390
0,75470
0,65540
0,60585
350 400
1,4 46605 Z0,45780
0,40880
0,38925
0,36975
0,301170
0,271300
605 PL20,241420
0,201700
0,162130
400 425
634
0,25
1,80130
1,50160
1,25190
1,20200
0,90265
0,75315
0,65365
0,60395
0,45530
0,40595
350 400 0,9 45
634 Z0,38625
0,36660
0,30790
0,27880
834
0,25
1,40170
0,85280
0,70340
0,55430
0,50475
350 400
1,0 47834 Z0,221080
0,201190
834 PL20,181280
0,161440
0,121915
400 425
825
0,18
1,40120
1,20145
0,90190
0,85200
0,70245
0,55310
0,50340
0,45380
0,34505
0,30570
350 400 0,9 46
825 Z0,26660
0,22775
0,20855
818
0,13
1,4090
1,20105
0,90135
0,85145
0,70175
0,55225
0,50245
0,45275
0,34365
0,30410
350 400 0,6 45
818 Z0,26475
0,22560
0,20620
1218
0,13
0,60205
0,18685
350 400
0,9 471218 Z0,17725
0,15825
0,13950
1218 PL20,12995
0,091330
0,081495
400 425
1213
0,10
0,85110
0,70135
0,60160
0,55175
0,45210
0,36265
0,32300
0,29330
0,22430
0,18530
350 400 0,8 46
1213 Z0,17560
0,15635
0,13730
Available standard facewidth’s: 350 - 400 - 425 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 4,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm (max. 260 Nm)
TM 215-30 |
49
Dimensionsdrummotors
TM215A30
TM215B30
TM 215A30, mildsteel drummotor with cast iron junction box
TM 215B30, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 215-30 |
50
TM215A30CR(RVS)
TM215B30CR(RVS)
TM 215A30 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 215B30 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 215-30 |
51
Dimensionstaildrums
KT215A30
KT215B30
KT 215A30, mildsteel taildrum
KT 215B30, mildsteel taildrummildsteel taildrum
TM 215-30 |
52
KT215A30CR(RVS)
KT215B30CR(RVS)
KT 215A30 CR, stainless steel taildrum with CR sealing
KT 215B30 CR, stainless steel taildrum with CR sealing
TM 215-30 |
53
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 25 mm)
Open cable exit (minimum drumlength increases with at least 25 mm)
Straight cable exit with cable gland
Standard execution of a TM 215-30 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 215-30 |
54
Bracketdrawings
AB30
AB30RVS
AB 30, cast iron or steel bracket
AB 30 RVS, stainless steel bracket
TM 215-30 |
55
ProductoverviewTM215-40TYPE
TM 215.40Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=500
275
5,50
4,701100
3,901340
3,501495
2,801865
2,502090
500 550 11 67
275 ZV2,002610
1,703075
1,503485
1,403730
1,304020
1,104750
255
4,00
4,70810
3.90975
3,501085
2,801355
2,501520
500 550 8,0 64255 Z2,001900
1,702235
255 ZV1,502535
1,402715
1,302925
1,103455
1,003800
0,904220
440
3,00
2,90985
2,401190
2,001425
1,801585
1,402035
1,252280
500 550 6,6 64
440 ZV1,002850
0,853355
0,753800
0,704070
0,654385
430
2,20
2,90720
2,40870
2,10995
1,701230
1,401495
1,251670
1,002090
0,902320
425 500 4,7 61
430 ZV0,852460
0,702985
0,653215
0,603485
0,553800
0,504180
0,454645
420
1,50
2,90490
2,40595
2,10680
1,70840
1,401020
1,251140
1,001425
0,901585
0,801780
0,702035
425 500 3,6 59
420 ZV0,602375
0,552590
0,502850
0,453165
0,403565
620
1,50
1,60890
0,851675
500 550 3,7 64
620 ZV0,363960
0,344190
0,314595
0,285090
415
1,10
2,90360
2,40435
2,10500
1,80580
1,40745
1,25835
1,001045
0,901160
0,801305
0,701495
425 500 2,9 57
0,601740
415 Z0,551900
0,502090
0,452320
415 ZV0,402615
615 ZV 1,100,362950
0,343075
0,313370
0,283730
0,264020
425 500 2,9 61
610
0,75
1,40510
1,20595
0,90790
0,85840
0,651095
0,601190
0,501425
0,451585
0,401780
425 500 2,5 59610 Z0,361980
0,342095
0,312300
610 ZV0,282545
0,262740
810 ZV 0,750,233100
0,213395
0,193750
425 500 2,7 61
675
0,55
1,40375
1,20435
0,90580
0,85615
0,65805
0,60870
0,501045
0,451160
0,401305
425 500 1,9 57
675 Z0,361450
0,341535
0,311635
0,281865
0,262010
875 Z
0,55
0,232270
425 500 2,2 59
875 ZV0,212490
0,192750
1275 ZV 0,550,173075
0,153485
0,124355
500 550 2,6 64
805
0,37
1,10320
0,85415
0,70500
0,65540
0,50705
0,45780
0,40880
0,351005
0,301170
425 500 1,8 57
805 Z0,281255
0,251405
0,231530
0,211675
0,191850
1205
0,37
0,55640
425 500 2,0 611205 Z0,172070
0,152345
1205 ZV0,122930
Available standard facewidth’s: 425 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 4,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 215-40 |
56
Dimensionsdrummotors
TM215A40
TM215B40
TM 215A40, mildsteel drummotor with cast iron junction box
TM 215B40, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 215-40 |
57
TM215A40CR(RVS)
TM215B40CR(RVS)
TM 215A40 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 215B40 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 215-40 |
58
Dimensionstaildrums
KT215A40
KT215B40
KT 215A40, mildsteel taildrum
KT 215B40, mildsteel taildrum
TM 215-40 |
59
KT215A40CR(RVS)
KT215B40CR(RVS)
KT 215A40 CR, stainless steel taildrum with CR sealing
KT 215B40 CR, stainless steel taildrum with CR sealing
TM 215-40 |
60
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Open cable exit (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 215-40 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 215-40 |
61
Bracketdrawings
AB40
AB40RVS
AB 40, cast iron or steel bracket
AB 40 RVS, stainless steel bracket
TM 215-40 |
62
ProductoverviewTM215B50TYPE
TM 215B50Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
455 PL2 4,00,31
118700,28
13140600 8,8 105
440 PL2 3,00,318900
0,289855
600 6,6 105
630 PL2 2,20,20
101200,18
11240600 5,5 105
620 PL2 1,50,206900
0,187665
600 3,7 105
Available standard facewidth’s: 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 215B50 |
63
Dimensions
TM215B50
KT215B50
TM 215B50, mildsteel drummotor with cast iron junction box
KT 215B50, mildsteel taildrum
Width : 95
TM 215B50 |
64
Cableexit
Option1
Option3
AB50
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
AB 50, cast iron or steel bracket
Straight cable exit with cable gland
Standard execution of a TM 215B50 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 215B50 |
65
ProductoverviewTM273-40TYPE
TM 273.40Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
275
5,50
4,951055
4,451175
3,551470
3,151655
500 550 11,0 90275 Z2,502075
275 ZV2,202390
1,952695
1,802885
1,703110
1,403785
1,304055
1,204375
255
4,00
4,95770
4,45855
3,551070
3,151205
500 550 8,0 85255 Z2,501510
2,201740
1,951960
1,802100
1,702265
255 ZV1,402755
1,302950
1,203185
440
3,00
3,70775
3,05940
2,501150
2,251280
1,801600
1,601800
500 550 6,6 85440 Z1,252255
440 ZV1,102600
1,002930
0,903135
0,853385
430
2,20
3,70565
3,05690
2,60800
2,15970
1,751185
1,601320
1,251650
1,151860
500 500 4,7 85430 Z1,051935
0,902350
430 ZV0,852530
0,752745
0,703020
0,653235
0,603490
420
1,50
3,70385
3,05470
2,60545
2,15660
1,75810
1,60900
1,251125
1,151265
1,001440
0,851645
500 500 3,6 80420 Z0,751870
0,702060
0,652205
420ZV0,602380
0,502865
620 ZV 1,500,463100
0,433320
0,403585
0,363910
500 550 3,7 85
415
1,10
3,70285
3,05345
2,60400
2,15485
1,75595
1,60660
1,25825
1,10930
1,001055
0,851210
500 500 2,9 750,751400
415 Z0,701510
0,651615
0,601745
0,502100
615 Z
1,10
0,462275
500 500 2,9 80
615 ZV0,432435
0,402630
0,362865
0,333160
610
0,75
1,75410
1,45495
1,15610
1,05675
0,85845
0,75955
0,651080
0,551240
0,501435
500 500 2,5 80
610 Z0,461550
0,431660
0,401790
0,362005
0,332155
810 ZV 0,750,302400
0,272615
0,252885
500 500 2,7 80
675
0,55
1,75300
1,45365
1,15445
1,05495
0,85620
0,75700
0,65795
0,55910
0,501055
500 500 1,9 75
675 Z0,461135
0,431215
0,401315
0,361470
0,331580
875 Z 0,550,301760
0,271915
0,252115
500 500 2,2 80
1275 ZV 0,550,222420
0,202600
0,173130
500 550 2,6 85
805
0,37
1,30265
1,10325
0,90395
0,80440
0,65550
0,55620
0,50705
0,45805
0,40935
500 500 1,8 75
805 Z0,351010
0,331080
0,301165
0,271320
0,251405
1205
0,37
0,70510
500 500 2,0 80
1205 Z0,221595
0,191845
0,162220
Available standard facewidth’s: 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 6 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 273-40 |
66
Dimensionsdrummotors
TM273A40
TM273B40
TM 273A40, mildsteel drummotor with cast iron junction box
TM 273B40, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 273-40 |
67
KT273A40
KT273B40
KT 273A40, mildsteel taildrum
KT 273B40, mildsteel taildrum
TM 273-40 |
Dimensionstaildrums
68
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Open cable exit (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 273-40 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 273-40 |
69
Bracketdrawings
AB40
AB40RVS
AB 40, cast iron or steel bracket
AB 40 RVS, stainless steel bracket
TM 273-40 |
70
ProductoverviewTM315-40TYPE
TM 315.40Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
275
5,50
5,201005
4,101275
3,701410
500 550 11,0 115275 Z3,001740
2,502090
2,302270
2,102490
275 ZV1,902750
1,603265
1,503485
1,403730
1,304020
255
4,00
5,20730
4,10925
3,701025
500 550 8,0 110255 Z3,001265
2,501520
2,301650
2,101810
1,902000
1,602375
255 ZV1,502535
1,402715
1,302925
440
3,00
4,30665
3,50815
2,90985
2,601095
2,101355
1,801585
500 550 6,6 110440 Z1,501900
1,302190
440 ZV1,102590
0,953000
430
2,20
4,30485
3,50595
3,00695
2,50835
2,10995
1,801160
1,501395
1,301610
500 500 4,7 110430 Z1,002090
0,902320
430 ZV0,802615
0,752785
0,702985
0,653215
420
1,50
4,30330
3,50405
3,00475
2,50570
2,10680
1,80790
1,50950
1,301095
1,101295
1,001425
500 500 3,6 105
420 Z0,901585
0,801780
0,751900
0,702035
0,652190
0,602375
620 ZV 1,500,552590
0,502850
0,453165
0,403565
500 550 3,7 110
415
1,10
4,30245
3,50300
3,00350
2,50420
2,10500
1,80580
1,50695
1,30805
1,10950
1,001045
500 500 2,9 1000,901160
415 Z0,801305
0,751395
0,701495
0,651610
0,601740
615 Z
1,10
0,551900
0,502090
0,452320
500 500 2,9 105
615 ZV0,402615
TM 315-40 |
71
TYPETM 315.40
PowerkW
Beltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
610
0,75
2,10340
1,70420
1,40510
1,25570
1,00715
0,90790
0,75950
0,701015
0,601190
500 500 2,5 105
610 Z0,551295
0,501425
0,451585
0,401780
810 Z
0,75
0,342095
0,312300
500 500 2,7 105
810 ZV0,282545
675
0,55
2,10250
1,70305
1,40375
1,25420
1,00525
0,90580
0,75695
0,70745
0,60870
500 500 1,9 100
675 Z0,55950
0,501045
0,451160
0,401305
875 Z 0,550,341535
0,311685
0,281865
500 500 2,2 105
1275 Z
0,55
0,252090
0,222375
500 550 2,6 110
1275 ZV0,182905
805
0,37
1,50235
1,25280
1,00350
0,95370
0,75470
0,65540
0,60585
0,50705
0,45780
500 500 1,8 100
805 Z0,40880
0,37950
0,341035
0,311135
0,281255
1205
0,37
0,80440
500 500 2,0 105
1205 Z0,251405
0,221600
0,181955
Available standard facewidth’s: 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmWhen an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 7,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 315-40 |
72
Dimensionsdrummotors
TM315A40
TM315B40
TM 315A40, mildsteel drummotor with cast iron junction box
TM 315B40, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 315-40 |
73
TM315A40CR(RVS)
TM315B40CR(RVS)
TM 315A40 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 315B40 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 315-40 |
74
Dimensionstaildrums
KT315A40
KT315B40
KT 315A40, mildsteel taildrum
KT 315B40, mildsteel taildrum
TM 315-40 |
75
KT315A40CR(RVS)
KT315B40CR(RVS)
KT 315A40 CR, stainless steel taildrum with CR sealing
KT 315B40 CR, stainless steel taildrum with CR sealing
TM 315-40 |
76
Cableexit
Option1
Option3
Option4
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Open cable exit (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 315-40 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
TM 315-40 |
77
Bracketdrawings
AB40
AB40RVS
AB 40, cast iron or steel bracket
AB 40 RVS, stainless steel bracket
TM 315-40 |
78
ProductoverviewTM315-50TYPE
TM 315.50Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
215
11
4,402375
3,802750
3,403075
3,003485
600(650)
650(700)
19,7 140215 Z2,803730
2,504180
2,404355
2,204750
215 ZV1,905500
1,606530
410
7,5
4,101740
3,402095
3,002375
2,402970
2,203240
1,903750
1,704190
1,504750
600 650 15 140
410 ZV1,405090
1,255700
1,205940
1,106475
475
5,5
4,101275
3,401535
3,001740
2,402175
2,202375
1,902750
1,703075
1,503485
550 600 10,5 135475 Z1,403730
1,254180
1,204355
1,104750
475 ZV0,955500
0,806530
455
4,0
4,10925
3,401120
3,001265
2,401585
2,301650
1,902000
1,702235
1,502535
1,402715
1,203165
500 550 7,8 130
1,103455
0,904220
455 Z0,804750
455 ZV0,705430
0,655845
0,606335
0,556910
440
3,0
2,301240
1,901500
1,701675
1,501900
1,402035
1,202375
1,102590
0,903165
0,803565
500 550 6,6 130440 Z0,704070
0,604750
440 ZV0,555180
0,505700
640 3,02,701055
1,601780
500 550 7,1 130
640 ZV0,456335
0,407125
630
2,2
1,501395
1,201740
1,101900
0,902320
0,802615
0,702985
0,603485
0,504180
500 550 4,9 130630 Z0,454645
630 ZV0,405225
0,385500
0,346145
820
1,5
1,101295
0,901585
0,851675
0,652190
0,602375
0,552590
0,453165
0,403565
500 550 4,6 130820 Z0,373850
0,324455
0,294915
820 ZV0,255700
1220
1,5
0,702035
0,354070
550 600 5,8 135
1220 ZV0,245940
0,216785
815
1,1
1,10950
0,901160
0,851230
0,651610
0,601740
0,551900
0,452320
0,402615
500 550 3,3 130
815 Z0,372825
0,323265
0,293605
0,254180
1215
1,1
0,701495
0,352985
500 550 5,9 1301215 Z0,244355
1215 ZV0,195500
0,166530
Available standard facewidth’s: 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmWhen a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 7 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 315-50 |
79
Dimensionsdrummotors
TM315A50
TM315B50
TM 315A50, mildsteel drummotor with cast iron junction box
TM 315B50, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
TM 315-50 |
80
TM315A50CR(RVS)
TM315B50CR(RVS)
TM 315A50 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 315B50 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 315-50 |
81
Dimensionstaildrums
KT315A50
KT315B50
KT 315A50, mildsteel taildrum
KT 315B50, mildsteel taildrum
TM 315-50 |
82
KT315A50CR(RVS)
KT315B50CR(RVS)
KT 315A50 CR, stainless steel taildrum with CR sealing
KT 315B50 CR, stainless steel taildrum with CR sealing
TM 315-50 |
83
Cableexit
Option1
Option3Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 315-50 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 315-50 |
85
ProductoverviewTM400-50TYPE
TM400.50PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=600
215
11
4,802175
4,202490
3,602905
600(650)
650(700)
19,7 205215 Z3,403075
3,203265
3,003485
2,604020
2,404355
215 ZV2,005225
410
7,5
4,301655
3,901825
3,502035
3,102300
2,802545
2,402970
2,103395
1,803960
600 650 15,0 205410 Z1,704190
1,604455
1,504750
410 ZV1,305480
475
5,5
4,301215
3,901340
3,501495
3,101685
2,801865
2,402175
2,102490
1,802905
600 600 10,5 200475 Z1,703075
1,603265
1,503485
1,304020
1,204355
475 ZV1,005225
455
4,0
4,30885
3,90975
3,501085
3,101225
2,801355
2,401585
2,101810
1,902000
1,702235
1,502535
600 600 7,8 195
1,302925
1,103455
455 Z1,003800
0,904220
0,854470
0,804750
455 ZV0,705430
440
3,0
2,801020
2,401190
2,101355
1,901500
1,701675
1,501900
1,302190
1,202375
1,002850
600 600 6,6 195
440 Z0,903165
0,803565
0,704070
0,654385
640
3,0
3,50815
1,601780
1,402035
1,102590
600 600 7,1 195640 Z0,604750
640 ZV0,505700
630
2,2
1,901100
1,601305
1,401495
1,101900
1,002090
0,852460
0,752785
0,653215
600 600 4,9 195630 Z0,603485
0,504180
0,454645
630 ZV0,405225
820
1,5
1,401020
1,201190
1,101295
0,801780
0,751900
0,652190
0,602375
0,502850
600 600 4,6 195
820 Z0,453165
0,403565
0,363960
0,324455
1220
1,5
0,901585
0,702035
600 600 5,8 2001220 Z0,304750
1220 ZV0,265480
815
1,1
1,40745
1,20870
1,10950
0,801305
0,751395
0,651610
0,601740
0,502090
600 600 3,3 195
815 Z0,452320
0,402615
0,362905
0,323265
1215
1,1
0,901160
0,701495
600 600 5,9 1951215 Z0,303485
0,264020
0,244355
1215 ZV0,205225
Available standard facewidth’s: 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmWhen a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 150 mm. The total weight of a drummotor grows approx. 12,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 400-50 |
86
Dimensions
TM400A50
KT400A50
TM 400A50, mildsteel drummotor with cast iron junction box
KT 400A50, mildsteel taildrum
Width : 116
TM 400-50 |
87
Cableexit
Option1
Option3
AB50
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
AB 50, cast iron or steel bracket
Straight cable exit with cable gland
Standard execution of a TM 400A50 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 400-50 |
88
ProductoverviewTM400-60TYPE
TM400.60PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=650
230
22,0
4,204975
700(750)
750(800)
39 255230 Z3,605805
230 ZV3,006965
2,608040
2,209500
225
18,5
4,204180
700(750)
750(800)
34 255225 Z3,604880
3,005885
225 ZV2,606760
2,207985
220
15,0
4,603100
3,404190
2,605480 650
(700)700
(750)28,0 245
220 ZV2,206475
1,807915
1,608905
1,3010960
415
11,0
4,102550
3,702825
2,703870
2,104975
650 700 21,0 245415 Z1,805805
415 ZV1,506965
1,308040
1,109500
410
7,5
4,101740
3,701925
2,702640
2,303100
1,704190
1,305480
600 650 14,5 230
410 ZV1,106475
0,907915
0,808905
0,6510960
475
5,5
3,701410
2,701935
2,502090
2,302270
1,703075
1,304020
1,005225
600 650 12,0 225475 Z0,905805
475 ZV0,806530
0,658040
455
4,0
3,701025
2,701405
2,501520
2,301650
1,702235
1,302925
1,003800
600 650 9,5 220
455 Z0,904220
0,804750
0,655845
655
4,0
1,502535
600 650 9,2 225
655 ZV0,606335
0,507600
0,458445
640
3,0
1,701675
1,501900
1,102590
0,853355
0,654385
600 650 7,0 220
640 Z0,604750
0,505700
0,456335
840
3,0
1,252280
600 650 8,7 225
840 ZV0,407125
0,328905
830
2,2
1,251670
1,101900
0,802615
0,653215
0,504180
600 650 8,0 220
830 Z0,454645
0,405225
0,326530
1230
2,2
0,752785
0,553800
600 650 8,2 230
1230 ZV0,287465
0,258360
0,2010450
1220
1,5
0,801780
0,751900
0,552590
0,403565
0,304750
600 650 5,1 2251220 Z0,285090
0,255700
1220 ZV0,207125
Availablestandardfacewidth’s:600-650-700-750-800-850-900-950-1000-1050-1100-1150mmWhen a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 150 mm. The total weight of a drummotor grows approx. 12 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 400-60 |
89
Dimensionsdrummotors
TM400A60
TM400B60
TM 400A60, mildsteel drummotor with cast iron junction box
TM 400B60, mildsteel drummotor with cast iron junction boxmildsteel drummotor with cast iron junction box
Width : 116
Width : 116
TM 400-60 |
90
KT400A60
KT400B60
KT 400A60, mildsteel taildrum
KT 400B60, mildsteel taildrummildsteel taildrum
TM 400-60 |
Dimensionstaildrums
91
Cableexit
Option1Straight cable exit with cable gland
Standard execution of a TM 400-60 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 400-60 |
93
ProductoverviewTM500-60TYPE
TM500.60PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Min.LmmDesign
B
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=850
230 Z
22,0
4,404750
3,805500 700
(750)750
(800)39 365
230 ZV3,206530
2,707740
225 Z
18,5
4,403990
3,804625
3,205490 700
(750)750
(800)34 365
225 ZV2,706505
220 Z
15,0
2,705275
2,306195 650
(700)700
(750)28,0 355
220 ZV2,007125
1,608905
415
11,0
4,702225
3,403075
2,703870
650 700 21,0 355415 Z2,204750
1,905500
415 ZV1,606530
1,308040
410
7,5
4,701515
3,402095
2,902455
2,103395
1,604455
600 650 14,5 340410 Z1,405090
1,205940
410 ZV1,007125
0,808905
475
5,5
4,701110
3,401535
3,201635
2,901800
2,102490
1,603265
1,204355
600 650 12,0 335
475 Z1,005225
0,806530
455
4,0
4,70810
3,401120
3,201190
2,901310
2,101810
1,602375
1,203165
600 650 9,5 330
455 Z1,003800
0,804750
655
4,0
1,902000
1,402715
600 650 9,2 335655 Z0,755065
0,655845
655 ZV0,556910
640
3,0
2,101355
1,901500
1,402035
1,102590
0,803565
600 650 7,0 330
640 Z0,753800
0,654385
0,555180
840
3,0
1,601780
600 650 8,7 335
840 ZV0,407125
830
2,2
1,601305
1,401495
1,002090
0,802615
0,603485
600 650 8,0 330
830 Z0,504180
0,405225
1230
2,2
0,702985
600 650 8,2 340
1230 ZV0,336335
0,258360
1220
1,5
1,101295
0,951500
0,702035
0,552590
0,403565
600 650 5,1 335
1220 Z0,383750
0,334320
0,255700
Available standard facewidth’s: 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 - 1400 - 1600 mmWhen a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 150 mm. The total weight of a drummotor grows approx. 19 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 500-60 |
94
Dimensions
TM500A60
KT500A60
TM 500A60, mildsteel drummotor with cast iron junction box
KT 500A60, mildsteel taildrum
Width : 116
TM 500-60 |
95
Cableexit
Option1
AB60AB 60, cast iron or steel bracket
Straight cable exit with cable gland
Standard execution of a TM 500-60 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 500-60 |
96
ProductoverviewTM500A75TYPE
TM500A75PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=850
440 ZV 30,03,208905
2,5011400
2,0014250
950 52,0
430 ZV 22,03,206530
2,508360
2,0010450
1,6013065
850 37,0 500
425 ZV 18,53,205490
2,507030
2,008790
1,6010985
850 32,0 490
620 ZV 15,02,106785
1,708380
1,3010960
1,0014250
850 31,5 500
815 ZV 11,01,606530
1,258360
1,0010450
0,8013065
850 26,0 500
Available standard facewidth’s: 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 - 1400 - 1600 mmOther powers and frequencies upon request.The total weight of a drummotor grows approx. 27,7 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 500A75 |
97
Dimensions
TM500A75
KT500A75
TM 500A75, mildsteel drummotor with cast iron junction box
KT 500A75, mildsteel taildrum
Width : 116
TM 500A75 |
98
Cableexit
Option1
AB75AB 75, cast iron or steel bracket
Straight cable exit with cable gland
Standard execution of a TM 500-75 is with a cast iron terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 500A75 |
99
ProductoverviewTM620A75TYPE
TM620A75PowerkW
Beltspeedm/sat50HzBeltpullN
Min.LmmDesign
A
Fullloadcurr.400V-50Hz
I=...A
Weightkg
L=850
440 ZV 30,03,907310
3,109190
2,5011400
950 52,0
430 ZV 22,03,905360
3,106740
2,508360
2,0010450
850 37,0 700
425 ZV 18,53,904505
3,105670
2,507030
2,008790
850 32,0 690
620 ZV 15,02,605480
2,106785
1,608905
1,2511400
850 31,5 700
815 ZV 11,02,005225
1,506965
1,258360
1,0010450
850 26,0 700
Available standard facewidth’s: 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 - 1400 - 1600 mmThe total weight of a drummotor grows approx. 38,7 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 Nm
TM 620A75 |
100
Dimensions
TM620A75
KT620A75
TM 620A75, mildsteel drummotor with cast iron junction box
KT 620A75, mildsteel taildrum
Width : 185
TM 620A75 |
101
Cableexit
Option1
AB75AB 75, cast iron or steel bracket
Straight cable exit with cable gland
Standard execution of a TM 620-75 is with a cast iron terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
TM 620A75 |
Van der GraafPower Transmission Equipment
Netherlands Canada Great BritainVan der Graaf B.V. Van der Graaf Inc. Van der Graaf U.K. Ltd.
De Weijert 14 2 Van der Graaf Court Unit 23, The Metro Centre
Postbus 3 Brampton Welbeck Way Woodston
8325 ZG Vollenhove Ontario L6T 5R6 Peterborough PE2 7UH
Tel: 00 31 527 241441 Tel: 00 1 905 793 8100 Tel: 00 44 1733 391777
Fax: 00 31 527 241488 Fax: 00 1 905 793 8129 Fax: 00 44 1733 391044
E-mail: info@vandergraafpte.nl E-mail: info@vandergraaf.com E-mail: sales@vandergraaf.co.uk
www.vandergraafpte.nl www.vandergraaf.com www.drummotor.com
USA Germany SwedenVan der Graaf Corp. Van der Graaf GmbH Van der Graaf Scandinavia AB
1481 Trae Lane Rheiner Straße 24 B Spinngatan 2
Lithia Springs GA 48432 Rheine-Mesum 260 50 Billesholm
30122 Atlanta Tel: 00 49 5975 306210 Tel: 00 46 42 22 0802
Tel: 00 1 770 819 6573 Fax: 00 49 5975 3062120 Fax: 00 46 42 22 0803
00 1 770 819 6566 E-mail: info@vandergraaf.de E-mail: info@vandergraaf.se
Fax: 00 1 770 819 6675 www.vandergraaf.de www.vandergraaf.se
Contact us
top related