quality control.dqa
Post on 04-Jun-2018
214 Views
Preview:
TRANSCRIPT
-
8/13/2019 Quality Control.dqa
1/36
Release 5: Revision 9
SACS
Quality Control
Quality Control
RELEASE 5.2
USERS MANUAL
ENGINEERING DYNAMICS, INC.
2113 38TH STREET
KENNER, LOUISIANA 70065
U.S.A.
No part of this document may be
reproduced in any form, in an
electronic retrieval system or
otherwise, without the prior
written permission of the publisher.
Copyright 2005 by
ENGINEERING DYNAMICS, INC.
Printed in U.S.A.
-
8/13/2019 Quality Control.dqa
2/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
3/36
Release 5: Revision 9
SACS
Quality Control
i
TABLE OF CONTENTS
1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2.0 SOFTWARE CONTROL PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.1 MODULE VERSION IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2 IMPLEMENTATION OF UPDATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3 MODULES RELEASE PROTOCOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3.0 SOFTWARE TESTING PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.1 STATIC TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.2 SYSTEM INTEGRATION TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.3 DYNAMIC TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.4 THIRD-PARTY TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4.0 SOFTWARE SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5.0 FUNCTIONAL ORGANIZATION DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.1 PROGRAM DEVELOPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.2 SYSTEM INTEGRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.3 BETA TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.4 FINAL TESTING AND RELEASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.5 DOCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
6.0 Q.A. OF PROGRAM MODULES AND DOCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
6.1 PROGRAM MODULES AND CORRESPONDING MANUALS . . . . . . . . . . . . . . . . . . . 6-1
6.2 DOCUMENTATION PAGE NUMBERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
6.3 PROGRAM DOCUMENTATION CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
A.0 QUALITY ASSURANCE RELEASE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
-
8/13/2019 Quality Control.dqa
4/36
Release 5: Revision 9
SACS
Quality Control
ii
-
8/13/2019 Quality Control.dqa
5/36
Release 5: Revision 9
SACS
Quality Control
SECTION 1
INTRODUCTION
-
8/13/2019 Quality Control.dqa
6/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
7/36
Release 5: Revision 9
SACS
Quality Control
1-1
1.0 INTRODUCTION
This document is issued for the information of users and the potential users of the
Engineering Dynamics, Inc. (EDI) SACS Software System programs. The program
quality control topics covered in this document are Software Control Procedures, Testing
Procedures, Software Support Services, Functional Organization Description and
Documentation. The development of the quality control procedure has occurred over
many years and is intended to meet the specifications of NATO Standards
Document AQAP-13.
-
8/13/2019 Quality Control.dqa
8/36
Release 5: Revision 9
SACS
Quality Control
1-2
-
8/13/2019 Quality Control.dqa
9/36
Release 5: Revision 9
SACS
Quality Control
SECTION 2
SOFTWARE CONTROL PROCEDURES
-
8/13/2019 Quality Control.dqa
10/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
11/36
Release 5: Revision 9
SACS
Quality Control
2-1
2.0 SOFTWARE CONTROL PROCEDURES
EDI develops and maintains the SACS Software suite at its home office in Kenner,
Louisiana. The program system, comprising over twenty-five (25) interrelated program
modules, resides at EDIs on-site data processing facility which houses personal
computers running Windows 2000 and XP operating systems..
Early on in the development of the SACS System of programs EDI established
management guidelines for the control of a continuously developing software product
line. The central procedure for maintaining large-scale, multifaceted software that exists
in an environment that requires continual innovations was to maintain all versions of the
software in one set of source code. EDI has developed an internal program maintenance
system that allows this to be accomplished in a highly automated procedure. Control
procedures are described in the following sections.
2.1 MODULE VERSION IDENTIFICATION
Each program module in the SACS System is tracked throughout its life by a uniquemodule version identification number. This ID number shows three principal module
qualities. For example, in the ID #XX.YY.RR.ZZ
XX is the major release number
YY is the version number
ZZ is the build number.
Module version identifications are reported in the output listing files or, where
applicable, under the help about features.
2.2 IMPLEMENTATION OF UPDATES
All updates and modifications to SACS System modules are performed by EDI engineersand programmers at EDIs in-house data processing facility headquartered in Kenner,
Louisiana.
2.3 MODULES RELEASE PROTOCOL
Distribution of all SACS modules and major system releases are processed through the
Module Release Group at EDIs home office. Each Software release is monitored by this
office which verifies testing group clearance, machine type and operating system
compatibility, export and shipping requirements and any particular special client
requirements.
The delivery of the program system is made on optical media. Such distributions consist
of the program modules requested, any data files required by the program modules andthe necessary support software. Also included will be a series of inputs and
corresponding outputs for selected analysis models which are described in Appendix A.
These analysis models have been designed to demonstrate the various functions of the
program modules being delivered. Successful installation of the program system is
achieved when identical results are produced for these analysis models on the receiving
computer system.
-
8/13/2019 Quality Control.dqa
12/36
Release 5: Revision 9
SACS
Quality Control
2-2
-
8/13/2019 Quality Control.dqa
13/36
Release 5: Revision 9
SACS
Quality Control
SECTION 3
SOFTWARE TESTING PROCEDURES
-
8/13/2019 Quality Control.dqa
14/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
15/36
Release 5: Revision 9
SACS
Quality Control
3-1
3.0 SOFTWARE TESTING PROCEDURES
EDI maintains a comprehensive in-house testing program. The testing program processes
each newly developed or updated program module through four levels of test
verification:
Level 1 Static tests
Level 2 System integration tests
Level 3 Dynamic tests
Level 4 Third-party tests
3.1 STATIC TESTS
Static tests are carried out during the software module design and/or update phase by the
engineer/programmer in charge. These tests verify the basic functioning of the software
and its compatibility with the various language translators and computer operating
systems. Program modules which are hardware and/or firmware dependent are checked
for proper function at this time.
3.2 SYSTEM INTEGRATION TESTS
The SACS Suite of program modules have been designed to draw upon one common
input database and one common output database. All newly generated or updated
program modules are tested for compatibility with these two databases. Additionally, all
program modules are verified for compatibility of input and output format with the SACS
System as a whole.
3.3 DYNAMIC TESTS
Program modules which have cleared the Static and System Integration tests are then
made available to EDIs Engineering Consultancy group in Kenner. This group performsprogram module tests, in which test results are verified against results of completed
design projects.
3.4 THIRD-PARTY TESTS
In parallel with Dynamic testing, EDI issues pre-releases of the SACS System to a
number of third-party test sites in Brazil, Norway, France and the United States for
testing of new features and/or special requests needed on short notice.
-
8/13/2019 Quality Control.dqa
16/36
Release 5: Revision 9
SACS
Quality Control
3-2
-
8/13/2019 Quality Control.dqa
17/36
Release 5: Revision 9
SACS
Quality Control
SECTION 4
SOFTWARE SUPPORT SERVICES
-
8/13/2019 Quality Control.dqa
18/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
19/36
Release 5: Revision 9
SACS
Quality Control
4-1
4.0 SOFTWARE SUPPORT SERVICES
EDI provides an extensive software support network to supplement the SACS software
quality control measures. Clients worldwide may communicate with EDI and/or SACS
software representatives via telephone, telefax or e-mail seven days a week. The client
will speak or communicate directly with one of EDIs engineers who maintains and/or
uses the SACS System on a daily basis.
The interaction which results from this support system provides a continuous feedback of
ideas, enhancements and improvements to the SACS system and thus maintains the state-
of-the-art nature and high quality in the software product line.
-
8/13/2019 Quality Control.dqa
20/36
Release 5: Revision 9
SACS
Quality Control
4-2
-
8/13/2019 Quality Control.dqa
21/36
Release 5: Revision 9
SACS
Quality Control
SECTION 5
FUNCTIONAL ORGANIZATION
DESCRIPTION
-
8/13/2019 Quality Control.dqa
22/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
23/36
Release 5: Revision 9
SACS
Quality Control
5-1
5.0 FUNCTIONAL ORGANIZATION DESCRIPTION
EDI software development and maintenance are performed in five different phases. All
phases require at least vice-presidential approval to initiate and complete. The five phases
are listed in the following sections.
5.1 PROGRAM DEVELOPMENT
This includes conceptual development as well as incorporating corrections, enhancements
and modifications. This staff includes engineer/programmers and applied research
engineers.
5.2 SYSTEM INTEGRATION
All modifications and newly developed software are tested for conformity in internal
architecture and compatibility with existing software. All new software is given initial
testing to verify that the programs are performing according to the Program Development
guidelines. Also, any documentation changes are noted and submitted to the
Documentation Group. The programs are then submitted for Beta testing.
5.3 BETA TESTING
Testing is continued by in-house engineers. This testing is performed on existing project
data and compared to previous results from those projects. Also, outside third-party
companies participate in Beta testing by accepting pre-releases of the program to be used
on actual projects. All reports are submitted to the System Integration Group for final
evaluation.
5.4 FINAL TESTING AND RELEASE
Final testing is performed on all programs on each computer type currently supported by
EDI. Standard Master Test Data is created on EDIs quality assurance server for all
programs. These Master Tests are then performed on all other hardware releases and the
program outputs are compared to the Master Outputs from the quality assurance server.
All program releases are done in machine readable form (binary or absolute) and each
release contains a complete set of installation data and output prints, described in
Appendix A, to be used at each installation for quality assurance. Since it is impossible to
test the programs on all hardware operating systems and compiler libraries, the final
testing procedure is to be performed by the client by comparing the supplied quality test
data with the test data created by the client.
5.5 DOCUMENTATION
Documentation changes are normally made to coincide with new releases of the softwarereflecting the input from the System Integration. Documents are related to the current
release of each program as is shown in Section 6. Each document is identified by the date
of its release as shown on the title page of each document. Documents are not updated on
a page basis but are released as complete documents.
-
8/13/2019 Quality Control.dqa
24/36
Release 5: Revision 9
SACS
Quality Control
5-2
-
8/13/2019 Quality Control.dqa
25/36
Release 5: Revision 9
SACS
Quality Control
SECTION 6
Q.A. OF PROGRAM MODULES AND
DOCUMENTATION
-
8/13/2019 Quality Control.dqa
26/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
27/36
Release 5: Revision 9
SACS
Quality Control
6-1
6.0 Q.A. OF PROGRAM MODULES AND DOCUMENTATION
Individual users manuals are provided for each module of the SACS Software System.
6.1 PROGRAM MODULES AND CORRESPONDING MANUALS
SACS system users manuals are updated regularly. The following table shows the
version numbers for the released version of each of the SACS System Program modules
and the release date of the corresponding users manual.
Program Description (Name) Program Version Manual Date Manual Revision
Ansys To SACS Converter 6.0.0.1 - -
Combine Postfile Utility 6.0.0.1 2005 Release 6 Revision 0
Concrete 6.0.0.1 2005 Release 6 Revision 0
Damage Center 5.1.0.1 - -
DataGen (Data Generator) 6.0.0.1 2005 Release 6 Revision 0
Dispkey 6.0.0.1 - -
Dynamic Response Analysis 6.0.0.1 2005 Release 6 Revision 0
EditKey 6.0.0.1 - -
Eigen Vector/Value Extraction (Dynpac) 6.0.0.1 2005 Release 6 Revision 0
Element Stress and Code Check (Post or SACS IV) 6.0.0.1 2005 Release 6 Revision 0
Enhancements - 2005 Release 5.2
Environmental Load Generator (Seastate) 6.0.0.1 2005 Release 6 Revision 0
Equilibrium Check (Freebody) 6.0.0.1 2005 Release 6 Revision 0
Fatigue Damage/Life Analysis 6.0.0.1 2005 Release 6 Revision 0
Flotation & Upending Analysis 6.0.0.1 2005 Release 6 Revision 0
Global Load Analysis 6.0.0.1 2005 Release 6 Revision 0
Installation - 2005 Release 5.2
Interactive Collapse Results Viewer (Collapse View) 6.0.0.1 2005 Release 6 Revision 0
Interactive Fatigue 6.0.0.1 2005 Release 6 Revision 0
Interactive Modeler (Precede) 6.0.0.1 2005 Release 6 Revision 0
Introduction - 2005 Release 5 Revision 3
Large Deflection Analysis (SACS IV) 6.0.0.1 2005 Release 6 Revision 0
Launch Analysis 6.0.0.1 2005 Release 6 Revision 0
Listing File Converter 6.0.0.1 - -
Material Takeoff Analysis 6.0.0.1 2005 Release 6 Revision 0
Model File to PDMS Converter 6.0.0.1 - -
Model Viewer Application 6.0.0.1 - -
Motion/Stability 6.0.0.1 2005 Release 6 Revision 0
Non-Linear Element Analysis (Gap) 6.0.0.1 2005 Release 6 Revision 0
Non-Linear Plastic Analysis (Collapse) 6.0.0.1 2005 Release 6 Revision 0Pile/Soil Interaction (PSI/Pile) 6.0.0.1 2005 Release 6 Revision 0
Plot Utility (Prevue) 6.0.0.1 2005 Release 6 Revision 0
Postvue 6.0.0.1 2005 Release 6 Revision 0
Preprocessor (SACS IV) 6.0.0.1 2005 Release 6 Revision 0
Rigid Body Analysis 6.0.0.1 2005 Release 6 Revision 0
Ring 6.0.0.1 - -
SACS Executive 5.2.0.0 2005 Release 5 Revision 4
SACS Probability 6.0.0.1 - -
-
8/13/2019 Quality Control.dqa
28/36
Release 5: Revision 9
SACS
Quality Control
Program Description (Name) Program Version Manual Date Manual Revision
6-2
SACS to FEM converter (SACS/Femsys) 6.0.0.1 - -
SACS to SAT converter 6.0.0.1 - -
SACS to WAMIT Interface 6.0.0.1 2005 Release 6 Revision 0
SACS/MORA Interface 6.0.0.1 2005 Release 6 Revision 0
SACS to 3D-DXF model conversion 6.0.0.1 - -
SACS To Ansys Convertor 6.0.0.1 - -
SDNF Converter 6.0.0.1 - -
Single Pile Analysis (PSI/Pile) 6.0.0.1 2005 Release 6 Revision 0
Single Pile Analysis using FE (Pile3D) 6.0.0.1 2005 Release 6 Revision 0
Solver (SACS IV) 6.0.0.1 2005 Release 6 Revision 0
Strucad Converter 6.0.0.1 - -
Super Element Utility 6.0.0.1 2005 Release 6 Revision 0
Transportation Inertia Load Generator (Tow) 6.0.0.1 2005 Release 6 Revision 0
Tubular Connection Check (Joint Can) 6.0.0.1 2005 Release 6 Revision 0
Wave Response Analysis 6.0.0.1 2005 Release 6 Revision 0
6.2 DOCUMENTATION PAGE NUMBERING
The page numbering guidelines have been implemented to insure that page numbering for
each users manual is consistent. The few exceptions where the numbering is not
consistent are noted.
The general guidelines for numbering the pages of each manual are the following:
1. The beginning of each manual consists of the Title Page and the Table of
Contents. Pages are numbered with lower case Roman numerals.
2. The body of each manual is divided into sections which are numbered
numerically starting with number 1.0, 2.0, etc. Each section has a title page
which describes the section and indicates the specific section number. The
section may be divided into subsections which are numbered numerically starting
with the section number then the sub-section number. For example, the first and
second sub-sections of section 1 would be numbered 1.1 and 1.2, respectively.
Pages contained in the main body of the manual are numbered as follows:
The first part, which is preceded by a hyphen, is the section number in which the
page is found. The second part of the page number, also preceded by a hyphen, is
the page number in that section of the manual. For example, the sixth page in the
fifth section of a manual is numbered 5-6 and the following page in this section
is 5-7 .
4. The body of the manual may be followed by Appendices designated as A, B, C,etc. Pages in the appendices are numbered similar to the body except that the
section designator is an alphanumeric character corresponding to the appendix
designation. For example, the fifth page of Appendix A of a manual would be
numbered A-5.
-
8/13/2019 Quality Control.dqa
29/36
Release 5: Revision 9
SACS
Quality Control
6-3
6.3 PROGRAM DOCUMENTATION CONTENTS
The following table lists the number of sections, appendices and indices along with the
total number of pages in each of the SACS manuals.
Manual Name Sections Appendices Indices Pages
Collapse 6 0 0 126
Collapse View 12 0 0 64
Combine 5 0 0 62
Concrete 5 1 0 114
Data Generator 7 0 0 38
Dynamic Response 5 0 0 278
Dynpac 6 0 0 78
Enhancements 1 0 0 15
Executive 10 1 1 82
Fatigue 6 0 0 334
Flotation 6 0 0 132
Freebody 3 0 0 28
Gap 5 0 0 80
Global Load Analysis 5 0 0 124
Interactive Fatigue 11 0 0 54
Introduction to SACS Programs 3 0 0 28
Joint Can 5 0 0 98
Launch 5 0 0 122
Material Take-Off 5 0 0 70
Motion/Stability 5 0 0 120
PSI/Pile 7 0 0 210
Post 5 1 0 196Postvue 10 1 0 62
Precede 16 1 1 216
Prevue 7 1 0 36
Quality Control 6 1 0 36
Release 5.2 Enhancements 4 0 0 26
-
8/13/2019 Quality Control.dqa
30/36
Release 5: Revision 9
SACS
Quality Control
Manual Name Sections Appendices Indices Pages
6-4
Rigid 4 0 0 34
SACS IV 6 0 0 216
SACS/WAMIT 3 0 0 114
SACSStructural Analysis
System Installation
3 0 0 24
Seastate 8 0 0 300
Superelement 5 0 0 66
Tow 5 0 0 90
Wave Response 5 0 0 186
-
8/13/2019 Quality Control.dqa
31/36
Release 5: Revision 9
SACS
Quality Control
APPENDIX A
QUALITY ASSURANCE RELEASE
INFORMATION
-
8/13/2019 Quality Control.dqa
32/36
Release 5: Revision 9
SACS
Quality Control
-
8/13/2019 Quality Control.dqa
33/36
Release 5: Revision 9
SACS
Quality Control
A-1
A.0 QUALITY ASSURANCE RELEASE INFORMATION
The following is a list of installation data and output prints provided for quality assurance
testing. The final quality assurance testing is to be performed by the client by comparing
the supplied quality test data with the test data created by the client.
Demo 1. Static Topside
sacinp.demo01 - SACS IV data
saclst.demo01.std - Output listing of SACS IV run
demo01.run - SACS run file
Demo 2. Static Offshore
seainp.static.demo02 - Seastate static load data
sacinp.demo02 - SACS IV static data
jcninp.demo02 - Joint Can data for static analysis
seainp.ldf.demo02 - Seastate large deflection load data
pilinp.demo02 - Pile input data
saclst.demo02.std - Output listing of Seastate, SACS IV and Joint
Can run
ldflst.demo02.std - Output listing of large deflection analysis run
pillst.demo02.std - Output listing of single-pile analysis
demo02.run - SACS multi-file run file (runs entire demo)
static.demo02.run - Run file for static analysis
ldf.demo02.run - Run file for large deflection analysis
pile.demo02.run - Run file for single-pile analysis
Demo 3. Basic Non-Linear Add-On
sacinp.gap.demo03 - SACS IV input data for Gap analysis
gapinp.demo03 - Gap input data
sacinp.psi.demo03 - SACS IV input data for PSI analysis
psiinp.demo03 - Pile/Soil Interaction input data
gaplst.demo03.std - Output listing of nonlinear Gap analysis
psilst.demo03.std - Output listing of PSI analysis
demo03.run - SACS multi-file run file (runs entire demo)
gap.demo03.run - Run file for Gap analysis
psi.demo03.run - Run file for PSI analysis
Demo 4a. Basic Dynamic Add-On (w/Dynamic Response)
sacinp.demo04a - Seastate and SACS IV data
dyninp.demo04a - Dynpac modal analysis data
dyrinp.demo04a - Dynamic response (earthquake) data
saclst.demo04a.std - Output listing for static analysis run
dynlst.demo04a.std - Output listing for modal analysis run
dyrlst.demo04a.std - Output listing for earthquake analysis
demo04a.run - SACS multi-file run file (runs entire demo)
static.demo04a.run - Static analysis run file
dynpac.demo04a.run - Modal analysis run file
earthquake.demo04a.run - Earthquake analysis run file
-
8/13/2019 Quality Control.dqa
34/36
Release 5: Revision 9
SACS
Quality Control
A-2
Demo 4b. Basic Dynamic Add-On (w/Wave Response)
sacinp.demo04b - SACS IV data
seainp.mode.demo04b - Seastate modal analysis load data
seainp.wave.demo04b - Seastate wave response load data
dyninp.demo04b - Modal analysis input datawvrinp.demo04b - Wave response input data
dynlst.demo04b.std - Output listing for modal analysis run
wvrlst.demo04b.std - Output listing for wave response run
demo04b.run - SACS multi-file run file (runs entire demo)
dynpac.demo04b.run - Modal analysis run file
wave response.demo04b.run - Wave response run file
Demo 5a. Basic Dynamic Fatigue (w/Dynamic Response)
sacinp.demo05a - Seastate and SACS IV data
dyninp.demo05a - Dynpac modal analysis data
dyrinp.demo05a - Dynamic response (earthquake) data
ftginp.demo05a - Fatigue datasaclst.demo05a.std - Output listing for static analysis run
dynlst.demo05a.std - Output listing for modal analysis run
dyrlst.demo05a.std - Output listing for earthquake analysis
ftglst.demo05a.std - Output listing for fatigue analysis
demo05a.run - SACS multi-file run file (runs entire demo)
static.demo05a.run - Static analysis run file
dynpac.demo05a.run - Modal analysis run file
earthquake.demo05a.run - Earthquake analysis run file
fatigue.demo05a.run - Fatigue analysis run file
Demo 5b. Basic Dynamic Fatigue (w/Wave Response)
sacinp.demo05b - SACS IV dataseainp.mode.demo05b - Seastate modal analysis load data
seainp.wave.demo05b - Seastate wave response load data
dyninp.demo05b - Modal analysis input data
wvrinp.demo05b - Wave response input data
dynlst.demo05b.std - Output listing for modal analysis run
wvrlst.demo05b.std - Output listing for wave response run
ftglst.demo05b.std - Output listing for fatigue analysis run
demo05b.run - SACS multi-file run file (runs entire demo)
dynpac.demo05b.run - Modal analysis run file
wave response.demo05b.run - Wave response run file
fatigue.demo05b.run - Fatigue analysis run file
Demo 6. Advanced Dynamic Fatigue
sacinp.demo06 - SACS IV data
seainp.mode.demo06 - Seastate modal analysis load data
seainp.fatigue.demo06 - Seastate fatigue analysis load data
dyninp.demo06 - Modal analysis input data
dyrinp.demo06 - Earthquake analysis input data
wvrinp.demo06 - Wave response input data
ftginp.demo06 - Fatigue analysis input data
-
8/13/2019 Quality Control.dqa
35/36
Release 5: Revision 9
SACS
Quality Control
A-3
saclst.demo06.std - Output listing for static analysis run
dynlst.demo06.std - Output listing for modal analysis run
dyrlst.demo06.std - Output listing for earthquake analysis
wvrlst.demo06.std - Output listing for wave response run
ftglst.demo06.std - Output listing for fatigue analysis rundemo06.run - SACS multi-file run file (runs entire demo)
dynpac.demo06.run - Modal analysis run file
earthquake.demo06.run - Earthquake analysis run file
wave response.demo06.run - Wave response run file
fatigue.demo06.run - Fatigue analysis run file
Demo 7. Plastic Non-Linear Add-On
sacinp.demo07 - SACS IV data
sacinp.gap.demo07 - SACS IV data for nonlinear gap analysis
gapinp.demo07 - Gap analysis input data
psiinp.demo07 - Pile/Soil Interaction input data
clpinp.demo07 - Nonlinear collapse analysis input datasaclst.demo07.std - Output listing of static analysis run
gaplst.demo07.std - Output listing of Gap analysis run
psilst.demo07.std - Output listing of PSI analysis
clplst.demo07.std - Output listing of nonlinear collapse analysis
demo07.run - SACS multi-file run file (runs entire demo)
gap.demo07.run - Gap analysis run file
psi.demo07.run - Run file for PSI analysis
collapse.demo07.run - Nonlinear collapse analysis run file
Demo 8. Advanced Dynamic Add-On
sacinp.demo08 - SACS IV data
seainp.demo08 - Seastate input datadyninp.demo08 - Modal analysis input data
dyrinp.demo08 - Earthquake analysis input data
wvrinp.demo08 - Wave response input data
saclst.demo08.std - Output listing for static analysis run
dynlst.demo08.std - Output listing for modal analysis run
dyrlst.demo08.std - Output listing for earthquake analysis
wvrlst.demo08.std - Output listing for wave response run
demo08.run - SACS multi-file run file (runs entire demo)
static.demo08.run - Static analysis run file
dynpac.demo08.run - Modal analysis run file
earthquake.demo08.run - Earthquake analysis run file
wave response.demo08.run - Wave response run file
Demo 9. Basic Marine Add-On
sacinp.demo09 - SACS IV data
gapinp.demo09 - Gap analysis input data
towinp.demo09 - Tow analysis input data
gaplst.demo09.std - Output listing for Gap analysis run
towlst.demo09.std - Output listing for Tow analysis run
demo09.run - SACS multi-file run file (runs entire demo)
-
8/13/2019 Quality Control.dqa
36/36
SACS
Quality Control
gap.demo09.run - Gap analysis run file
tow.demo09.run - Tow analysis run file
Demo 10. Marine Installation Add-On
sacinp.demo10 - SACS IV datafltinp.demo10 - Flotation/upending input data
lnhinp.demo10 - Launch analysis input data
fltlst.demo10.std - Output listing for flotation/upending run
lnhlst.demo10.std - Output listing for Launch analysis run
demo10.run - SACS multi-file run file (runs entire demo)
flotation.demo10.run - Flotation/upending run file
launch.demo10.run - Launch analysis run file
Demo 11. Advanced Marine Transport Add-On
sacinp.demo11 - SACS IV data
fltinp.demo11 - Flotation/upending input data
lnhinp.demo11 - Launch analysis input datagapinp.demo11 - Gap analysis input data
towinp.demo11 - Tow analysis input data
trninp.demo11 - Motion/Stability analysis data
fltlst.demo11.std - Output listing for flotation/upending run
lnhlst.demo11.std - Output listing for Launch analysis run
gaplst.demo11.std - Output listing for Gap analysis run
towlst.demo11.std - Output listing for Tow analysis run
trnlst.demo11.std - Output listing for Motion/Stability analysis
demo11.run - SACS multi-file run file (runs entire demo)
flotation.demo11.run - Flotation/upending run file
launch.demo11.run - Launch analysis run file
gap.demo11.run - Gap analysis run filetow.demo11.run - Tow analysis run file
motion.demo11.run - Motion/Stability analysis run file
Demo 12. Miscellaneous
sacinp.mto.demo12 - SACS IV data for Material Take-Off analysis
mtoinp.demo12 - Material Take-Off data
sacinp.wamit.demo12 - SACS IV data for SACS to WAMIT conversion
s2winp.demo12 - SACS to WAMIT conversion data
mtolst.demo12.std - Output listing for material take-off
s2wlst.demo12.std - Output listing for SACS to WAMIT conversion
demo12.run - SACS multi-file run file (runs entire demo)
mto.demo12.run - Material Take-Off run filesacs2wamit.demo12.run - SACS to WAMIT conversion run file
top related