rack mount ac voltage stabilizers & regulators - single phase 3 to 15 kva - ashley edison ses-r...
Post on 11-Apr-2015
815 Views
Preview:
DESCRIPTION
TRANSCRIPT
SES-R
H & HL - SINGLE PHASE
SERVO ELECTRONIC DESIGN
AC VOLTAGE STABILISERS & REGULATORS
RACK MOUNTABLE AC SINGLE PHASE - 3 TO 15 kVA
ENSURING A STABLE AC MAINS VOLTAGE
AC mains voltage fluctuations can cause equipment to behave erratically and malfunction. Some
systems may even break down due to these fluctuations, noise or spikes. Failure to ensure the
incoming mains voltage is stable and clean can often result in costly equipment repairs and
unplanned down-time.
SES-H/HL-R-JANUARY-2013 www.AshleyEdison.com
SES H/HL-R SERIES - SINGLE PHASE - 3 to 15 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
COST EFFICIENT VOLTAGE STABILISATION
specifically designed for ease of
installation within a 19” rack
environment.
FEATURES
Automatic Voltage Regulation
Step less automated voltage regulation - ideal for 95%
of all applications.
Wide Range of Power Ratings
Single Phase 3 to 15 KVA
Broad Input Voltage Swing Ranges
Input Swing - ±15% (S15), ±20% (S20), ± 25%
(S25), ±30% (S30), ±35% (S35) & ±40% (S40) - to
specify.
Precise Output Voltage Regulation
Output Voltage Accuracy ± 1.%
Transient Voltage Surge Suppression
TVSS - Protects loads against harmful high-energy
surges, transients and spikes.
High Efficiency
Better than 98% for low running costs.
Inbuilt High Overload Capability
Ideal for loads with an inherent initial high current
Input Circuit Breaker
Standard protection on all models
Bypass Control Switch
Manual Electronic Controls Bypass Facility
Soft - Switch On
Load protection on Start Up
Over / Low Voltage Protection Ability to automatically shutdown the Voltage
Stabiliser in the event of the input supply voltage
going outside the input voltage window.
Compliance with International Standards
Designed, manufactured and supplied to comply with
leading international standards
CE Conformity
Fully compliant and labelled
Warranty
3 Years / 36 Months as standard
Available Standard Models:
H Series - High Voltage Models
220V, 230V or 240V (Single Phase)
L Series - Low Voltage Models
100V, 110V, 115V, 120V or 127V (Single Phase)
HL & LH Series
Step-Down & Step-Up Voltage Models (Single Phase)
Ashley-Edison AC Voltage Stabilizers offer -
Voltage Stability & Protection
Suitable for all electrical and electronic equipment, Ashley-Edison’s SES AC Voltage Stabilisers
continuously monitor the incoming supply. Should the incoming voltage rise or drop, the Stabilisers
will automatically control the output to ensure the voltage reaching the load equipment always remains
constant at the requisite voltage. Inbuilt spike protection ensures the load is continuously protected
against harmful utility supply born high energy spikes and surges.
Durability & Dependability
With an impressively wide range of input voltage window options and precise output voltage
regulation, the electro-mechanical / electronic servo design based SES Voltage Stabilisers have
repeatedly proven their durability and dependability in some of the world’s harshest and most
demanding power environments.
Energy Efficiency
Characterised by high efficiency, SES Stabilisers are completely unaffected by power factor and load
variations. Able to withstand high instantaneous overloads, SES Stabilisers do not generate any
magnetic interference - making them ideal for being located near to sensitive equipment. Through
delivering a regulated, stable and optimised voltage to the equipment they support, SES Stabilisers
ensure you only pay for the actual energy you need.
Unparalleled Protection and Value
Unparalleled inbuilt protection features, including the provision of Soft Switch-On as standard on all
models, ensures SES AC Voltage Stabilisers deliver, without compromising on technical performance
or quality, outstanding value for money.
220V - 230V - 240V - 50/60Hz
TYPICAL APPLICATIONS
VOLTAGE CHOICES AVAILABLE
2 WIRE SOLUTIONS SINGLE PHASE WITH NEUTRAL (+ GROUND)
H/HL SERIES 3 to 15 kVA (H)
3 to 5 kVA (HL)
High Voltage Models:
220V, 230V or 240V.
Other voltages available on individual request / quotation.
L/LH SERIES 3 to 10 kVA
3 to 5 kVA (LH)
Low Voltage Models:
100V, 110V, 115V, 120V or 127V.
Other voltages available on individual request / quotation.
Output
Voltage
In situations where there is a reasonably good mains supply, a Stabiliser
offering an input variation swing of ±15% (S15 Models) will usually be more
than acceptable, but in more remote locations, or countries where the
national supply infrastructure is less developed, variations of ±20% or greater
may be needed to be accommodated by the Stabiliser.
Please Note – These Stabilisers are not designed to support / protect voltage
“back feed” applications, where energy is required to be also fed back into
the utility supply.
H & HL SERIES INPUT VOLTAGE WINDOW OPTIONS
Input
Voltage
± 1%
SES-H-S*-R Ashley-Edison
Voltage Stabiliser
SES H/HL-R SERIES - SINGLE PHASE - 3 to 15 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-H/HL-R-JANUARY-2013 www.AshleyEdison.com
H & HL SERIES - SES-H/HL-S*-R Input Voltage Windows & Output Accuracy
Nominal Single Phase
Voltage
Output Voltage
Accuracy
± % of Nominal
INPUT VOLTAGE SWINGS / SWING MODEL NO VARIANTS
S15 S20 S25 S30 S35 S40
H - 3 to 15 kVA H - 3 to 15 kVA H - 3 to 10 kVA H - 3 to 7.5 kVA H - 3 to 7.5 kVA H - 3 to 5 kVA
HL - 3 to 5 kVA HL - 3 to 5 kVA HL - 3 to 5 kVA
220V
± 1% 187v to 253v (± 15%)
176v to 264v (± 20%)
165v to 275v (± 25%)
154v to 286v (± 30%)
143v to 297v (± 35%)
132v to 308v (± 40%)
± 3% 183v to 260v (-17% / +18%)
172v to 271v (-22% / +23%)
161v to 282v (-27% / +28%)
150v to 293v (-32% / +33%)
139v to 304v (-37% / +38%)
128v to 315v (-42% / +43%)
± 5% 178v to 266v (-19% / +21%)
167v to 277v (-24% / +26%)
156v to 288v (-29% / +31%)
145v to 299v (-34% / +36%)
134v to 310v (-39% / +41%)
123v to 321v (-44% / +46%)
230V
± 1% 196v to 264v (± 15%)
184v to 276v (± 20%)
173v to 287v (± 25%)
161v to 299v (± 30%)
150v to 310v (± 35%)
138v to 322v (± 40%)
± 3% 191v to 271v (-17% / +18%)
179v to 283v (-22% / +23%)
168v to 294v (-27% / +28%)
156v to 306v (-32% / +33%)
145v to 317v (-37% / +38%)
133v to 329v (-42% / +43%)
± 5% 186v to 278v (-19% / +21%)
175v to 290v (-24% / +26%)
163v to 302v (-29% / +31%)
152v to 313v (-34% / +36%)
140v to 324v (-39% / +41%)
129v to 336v (-44% / +46%)
240V
± 1% 204v to 276v (± 15%)
192v to 288v (± 20%)
180v to 300v (± 25%)
168v to 312v (± 30%)
156v to 324v (± 35%)
144v to 336v (± 40%)
± 3% 199v to 283v (-17% / +18%)
187v to 295v (-22% / +23%)
175v to 307v (-27% / +28%)
163v to 319v (-32% / +33%)
151v to 331v (-37% / +38%)
139v to 343v (-42% / +43%)
± 5% 194v to 290v (-19% / +21%)
182v to 302v (-24% / +26%)
170v to 314v (-29% / +31%)
158v to 326v (-34% / +36%)
146v to 338v (-39% / +41%)
134v to 350v (-44% / +46%)
Security Systems
Audio/Video Systems
Testing Equipment
Communication Systems
TV/Radio Broadcasting Stations
Computers & Network Systems
Medical Equipment
Electronic Equipment
H SERIES TECHNICAL SPECIFICATION
Model Rating
kVA
Max Rating (Amps) Dimensions (mm)
W x H x D
Weight
(Kg) @ 220V @ 230V @ 240V
S15 - Single Phase Input Swing ± 15%
SES-3H-S15-R 3 13.6 13 12.5 480 x 240 x 400 28
SES-5H-S15-R 5 23 22 21 480 x 240 x 400 30
SES-10H-S15-R 10 45 44 42 480 x 240 x 400 36
SES-15H-S15-R 15 68 65 63 480 x 240 x 400 53
S20 - Single Phase Input Swing ± 20%
SES-3H-S20-R 3 13.6 13 12.5 480 x 240 x 400 30
SES-5H-S20-R 5 23 22 21 480 x 240 x 400 36
SES-10H-S20-R 10 45 44 42 480 x 240 x 400 45
SES-15H-S20-R 15 68 65 63 480 x 240 x 400 60
S25 - Single Phase Input Swing ± 25%
SES-3H-S25-R 3 13.6 13 12.5 480 x 240 x 400 34
SES-5H-S25-R 5 23 22 21 480 x 240 x 400 36
SES-10H-S20-R 10 45 44 42 480 x 240 x 400 48
H SERIES PRODUCT SELECTION TABLE
Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.
Technology: Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).
Input Voltage Swing:
Output Voltage: Presettable for any voltage between 220V, 230V, 240V, (Customer to specify), Single Phase, 2 Wire. 254V & 277V models available to special order.
The permissible input voltage swing is relative to the preset output voltage.
Output Voltage Accuracy: ± 1%, ± 3% or ± 5 % - auto selection based
on input voltage swing.
Frequency: 47 - 65Hz
Response Time: <1.5ms
Correction Time: A 10% supply variation will be corrected to
within 2.5% in 0.6 seconds.
Efficiency: 98%
Power Factor: Any lagging to 0.95 leading
Surge Ratings: 10 x max. current rating for 2 seconds 3 x max. current rating for 1 minute 2 x max. current rating for 2 minutes
Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.
Soft-Switch On: Ensures the output voltage is set at minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start up voltage surges.
Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.
Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.
Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)
EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.
CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).
Standard Warranty: Three Years / 36 Months from date of supply
Standard Features:
Input Circuit Breaker Input / Output Terminals Bypass Control Switch Output Voltmeter Over / Low Voltage Protection Volt Free Contacts - (Normally Open / Closed)
Optional Accessories: Lightning Surge Arrestor AquaStop Protective Coating - protection against damp and moisture ingress
SES H-S*-R SERIES - SINGLE PHASE - 3 to 15 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-H-S*-R - JANUARY 2013 www.AshleyEdison.com
Note: Special voltage configurations available to individual order.
Model / Accuracy
± 1% ± 3% ± 5%
S15 ± 15% -17% +18% -19% +21%
S20 ± 20% -22% +23% -24% +26%
S25 ± 25% -27% +28% -29% +31%
S30 ± 30% -32% +33% -34% +36%
S35 ± 35% -32% +33% -34% +36%
S40 ± 40% -42% +43% -44% +46%
Single Phase, 2 Wire ( 1 Phase + Neutral + G/E).
Other swing options available to special quotation / order.
Model Rating
kVA
Max Rating (Amps) Dimensions (mm)
W x H x D
Weight
(Kg) @ 220V @ 230V @ 240V
S30 - Single Phase Input Swing ± 30%
SES-3H-S30-R 3 13.6 13 12.5 480 x 240 x 400 37
SES-5H-S30-R 5 23 22 21 480 x 240 x 400 40
SES-7.5H-S30-R 10 36 35 33 480 x 240 x 400 48
S35 - Single Phase Input Swing ± 35%
SES-3H-S35-R 3 13.6 13 12.5 480 x 240 x 400 41
SES-5H-S35-R 5 23 22 21 480 x 240 x 400 48
SES-7.5H-S30-R 10 36 35 33 480 x 240 x 400 50
S40 - Single Phase Input Swing ± 40%
SES-3H-S40-R 3 13.6 13 12.5 480 x 240 x 400 44
SES-5H-S40-R 5 23 22 21 480 x 240 x 400 50
Rack Mount Enclosure
Height = 5.4U
220V - 230V - 240V - 50/60Hz
STEP–DOWN AC VOLTAGE STABILISERS
HL SERIES TECHNICAL SPECIFICATION
Model Rating
kVA
Max Rating (Amps) Dimensions (mm)
W x H x D
Weight
(Kg) @ 100V @ 110V @ 115V @127V @120V
S15 - Single Phase Input Swing ± 15%
SES-3HL-S15-R 3 30 27 26 480 x 240 x 400 46 23 25
SES-5HL-S15-R 5 50 46 43 480 x 240 x 400 56 39 42
S20 - Single Phase Input Swing ± 20%
SES-3HL-S20-R 3 30 27 26 480 x 240 x 400 48 23 25
SES-5HL-S20-R 5 50 46 43 480 x 240 x 400 62 39 42
S25 - Single Phase Input Swing ± 25%
SES-3HL-S25-R 3 30 27 26 480 x 240 x 400 52 23 25
SES-5HL-S25-R 5 50 46 43 480 x 240 x 400 62 39 42
HL SERIES PRODUCT SELECTION TABLE
Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.
Technology: Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).
Input Voltage: 220V, 230V or 240V AC (Customer to specify), Single Phase, 2 Wire.
Input Voltage Swing:
Output Voltage: Presettable for any voltage between 100V, 110V, 115V & 120V (Customer to specify), Single Phase, 2 Wire.
127V models available to special order.
Output Voltage Accuracy: ± 1%, ± 3% or ± 5 % - auto selection based
on input voltage swing.
Frequency: 47 - 65Hz
Response Time: <1.5ms
Correction Time: A 10% supply variation will be corrected to
within 2.5% in 0.6 seconds.
Efficiency: 98%
Power Factor: Any lagging to 0.95 leading
Surge Ratings: 10 x max. current rating for 2 seconds 3 x max. current rating for 1 minute 2 x max. current rating for 2 minutes
Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.
Soft-Switch On: Ensures the output voltage is set at minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start up voltage surges.
Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.
Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.
Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)
EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.
CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).
Standard Warranty: Three Years / 36 Months from date of supply
Standard Features:
Input Circuit Breaker Input / Output Terminals Bypass Control Switch Output Voltmeter Over / Low Voltage Protection Volt Free Contacts - (Normally Open / Closed)
Optional Accessories: Lightning Surge Arrestor AquaStop Protective Coating - protection against damp and moisture ingress
SES HL-S*-R SERIES - SINGLE PHASE - 3 to 5 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-HL-S*-R - JANUARY 2013 www.AshleyEdison.com
Note: Special voltage configurations available to individual order.
Model / Accuracy ± 1% ± 3% ± 5%
S15 ± 15% -17% +18% -19% +21%
S20 ± 20% -22% +23% -24% +26%
S25 ± 25% -27% +28% -29% +31%
Rack Mount Enclosure
Height = 5.4U
Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.
220V - 230V - 240V - 50/60Hz
SES-R
L & LH - SINGLE PHASE
SERVO ELECTRONIC DESIGN
AC VOLTAGE STABILIZERS & REGULATORS
RACK MOUNTABLE AC SINGLE PHASE - 3 TO 10 kVA
ENSURING A STABLE AC UTILITY SUPPLY VOLTAGE
AC mains voltage fluctuations can cause equipment to behave erratically and malfunction. Some
systems may even break down due to these fluctuations, noise or spikes. Failure to ensure the
incoming mains voltage is stable and clean can often result in costly equipment repairs and
unscheduled down-time.
SES-L/LH-R-JANUARY-2013 www.AshleyEdison.com
SES L/LH-R SERIES - SINGLE PHASE - 3 to 10 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
COST EFFICIENT VOLTAGE STABILIZATION
specifically designed for ease of
installation within a 19” rack
environment.
FEATURES
Automatic Voltage Regulation
Step less automated voltage regulation - ideal for 95%
of all applications.
Wide Range of Power Ratings
Single Phase 3 to 10 KVA
Broad Input Voltage Swing Ranges
Input Swing - ±15% (S15), ±20% (S20), ± 25%
(S25), ±30% (S30) & ±35% (S35) - to specify.
Precise Output Voltage Regulation
Output Voltage Accuracy ± 1.%
Transient Voltage Surge Suppression
TVSS - Protects loads against harmful high-energy
surges, transients and spikes.
High Efficiency
Better than 98% for low running costs.
Inbuilt High Overload Capability
Ideal for loads with an inherent initial high current
Input Circuit Breaker
Standard protection on all models
Bypass Control Switch
Manual Electronic Controls Bypass Facility
Soft - Switch On
Load protection on Start Up
Over / Low Voltage Protection Ability to automatically shutdown the Voltage
Stabiliser in the event of the input supply voltage
going outside the input voltage window.
Compliance with International Standards
Designed, manufactured and supplied to comply with
leading international standards
CE Conformity
Fully compliant and labelled
Warranty
3 Years / 36 Months as standard
Available Standard Models:
L Series - Low Voltage Models
100V, 110V, 115V, 120V or 127V (Single Phase)
H Series - High Voltage Models
220V, 230V or 240V (Single Phase)
LH & HL Series
Step-Up & Step-Down Voltage Models (Single Phase)
Ashley-Edison AC Voltage Stabilizers offer -
Voltage Stability & Protection
Suitable for all electrical and electronic equipment, Ashley-Edison’s SES AC Voltage Stabilizers
continuously monitor the incoming supply. Should the incoming voltage rise or drop, the Stabilizers
will automatically control the output to ensure the voltage reaching the load equipment always remains
constant at the requisite voltage. Inbuilt spike protection ensures the load is continuously protected
against harmful utility supply born high energy spikes and surges.
Durability & Dependability
With an impressively wide range of input voltage window options and precise output voltage
regulation, the electro-mechanical / electronic servo design based SES Voltage Stabilizers have
repeatedly proven their durability and dependability in some of the world’s harshest and most
demanding power environments.
Energy Efficiency
Characterized by high efficiency, SES Stabilizers are completely unaffected by power factor and load
variations. Able to withstand high instantaneous overloads, SES Stabilizers do not generate any
magnetic interference - making them ideal for being located near to sensitive equipment. Through
delivering a regulated, stable and optimized voltage to the equipment they support, SES Stabilizers
ensure you only pay for the actual energy you need.
Unparalleled Protection and Value
Unparalleled inbuilt protection features, including the provision of Soft Switch-On as standard on all
models, ensures SES AC Voltage Stabilizers deliver, without compromising on technical performance
or quality, outstanding value for money.
100V - 110V - 115V - 120V - 127V - 50/60Hz
VOLTAGE CHOICES AVAILABLE
2 WIRE SOLUTIONS SINGLE PHASE WITH NEUTRAL (+ GROUND)
L/LH SERIES 3 to 10 kVA
3 to 5 kVA (LH)
Low Voltage Models:
100V, 110V, 115V, 120V or 127V.
Other voltages available on individual request / quotation
H/HL SERIES 3 to 15 kVA (H)
3 to 5 kVA (HL)
High Voltage Models:
220V, 230V or 240V.
Other voltages available on individual request / quotation.
Output
Voltage
In situations where there is a reasonably good mains supply, a Stabilizer
offering an input variation swing of ±15% (S15 Models) will usually be more
than acceptable, but in more remote locations, or countries where the
national supply infrastructure is less developed, variations of ±20% or greater
may be needed to be accommodated by the Stabilizer.
Please Note – These Stabilizers are not designed to support / protect voltage
“back feed” applications, where energy is required to be also fed back into
the utility supply.
L & LH SERIES INPUT VOLTAGE WINDOW OPTIONS
Input
Voltage
± 1%
SES-L-S*-R Ashley-Edison
Voltage Stabilizer
SES L/LH-R SERIES - SINGLE PHASE - 3 to 10 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-L/LH-R-JANUARY-2013 www.AshleyEdison.com
L & LH SERIES - SES-L/LH-S*-R Input Voltage Windows & Output Accuracy
Nominal Single
Phase Voltage
Output Voltage
Accuracy
± % of Nominal
INPUT VOLTAGE SWINGS / SWING MODEL NO VARIANTS
S15 S20 S25 S30 S35
L - 3 to 10 kVA L - 3 to 10 kVA L - 3 to 10 kVA L - 3 to 7.5 kVA L - 3 to 7.5 kVA
LH - 3 to 5 kVA LH - 3 to 5 kVA LH - 3 to 5 kVA
100V
± 1% 85v to 115v (± 15%)
80v to 120v (± 20%)
75v to 125v (± 25%)
70v to 130v (± 30%)
65v to 135v (± 35%)
± 3% 83v to 118v (-17% / +18%)
78v to 123v (-22% / +23%)
73v to 128v (-27% / +28%)
68v to 133v (-32% / +33%)
63v to 138v (-37% / +38%)
± 5% 81v to 121v (-19% / +21%)
76v to 126v (-24% / +26%)
71v to 131v (-29% / +31%)
66v to 136v (-34% / +36%)
61v to 141v (-39% / +41%)
110V
± 1% 94v to 127v (± 15%)
88v to 132v (± 20%)
83v to 138v (± 25%)
77v to 143v (± 30%)
72v to 149v (± 35%)
± 3% 91v to 130v (-17% / +18%)
86v to 135v (-22% / +23%)
80v to 141v (-27% / +28%)
75v to 146v (-32% / +33%)
69v to 152v (-37% / +38%)
± 5% 89v to 133v (-19% / +21%)
84v to 139v (-24% / +26%)
78v to 144v (-29% / +31%)
73v to 150v (-34% / +36%)
67v to 155v (-39% / +41%)
115V
± 1% 98v to 132v (± 15%)
92v to 138v (± 20%)
86v to 144v (± 25%)
81v to 150v (± 30%)
75v to 155v (± 35%)
± 3% 95v to 136v (-17% / +18%)
90v to 141v (-22% / +23%)
84v to 147v (-27% / +28%)
78v to 153v (-32% / +33%)
72v to 159v (-37% / +38%)
± 5% 93v to 139v (-19% / +21%)
87v to 145v (-24% / +26%)
82v to 151v (-29% / +31%)
76v to 156v (-34% / +36%)
70v to 162v (-39% / +41%)
120V
± 1% 102v to 138v (± 15%)
96v to 144v (± 20%)
90v to 150v (± 25%)
84v to 156v (± 30%)
78v to 162v (± 35%)
± 3% 100v to 142v (-17% / +18%)
94v to 148v (-22% / +23%)
88v to 154v (-27% / +28%)
82v to 160v (-32% / +33%)
76v to 166v (-37% / +38%)
± 5% 97v to 145v (-19% / +21%)
91v to 151v (-24% / +26%)
85v to 157v (-29% / +31%)
79v to 163v (-34% / +36%)
73v to 169v (-39% / +41%)
127V
± 1% 108v to 146v (± 15%)
102v to 152v (± 20%)
95v to 159v (± 25%)
89v to 165v (± 30%)
83v to 171v (± 35%)
± 3% 105v to 150v (-17% / +18%)
99v to 156v (-22% / +23%)
93v to 163v (-27% / +28%)
86v to 169v (-32% / +33%)
80v to 175v (-37% / +38%)
± 5% 103v to 154v (-19% / +21%)
97v to 160v (-24% / +26%)
90v to 166v (-29% / +31%)
84v to 173v (-34% / +36%)
77v to 179v (-39% / +41%)
L SERIES TECHNICAL SPECIFICATION
Model Rating
kVA
Max Rating (Amps) Dimensions (mm)
W x H x D
Weight
(Kg) @ 100V @ 110V @ 127V @ 115V @ 120V
S15 - Single Phase Input Swing ± 15%
SES-3L-S15-R 3 30 27 23 480 x 240 x 400 28 26 25
SES-5L-S15-R 5 50 45 39 480 x 240 x 400 30 43 41
SES-10L-S15-R 10 100 90 78 480 x 240 x 400 36 87 83
S20 - Single Phase Input Swing ± 20%
SES-3L-S20-R 3 30 27 23 480 x 240 x 400 30 26 25
SES-5L-S20-R 5 50 45 39 480 x 240 x 400 36 43 41
SES-10L-S20-R 10 100 90 78 480 x 240 x 400 45 87 83
S25 - Single Phase Input Swing ± 25%
SES-3L-S25-R 3 30 27 23 480 x 240 x 400 34 26 25
SES-5L-S25-R 5 50 45 39 480 x 240 x 400 36 43 41
SES-10L-S20-R 10 100 90 78 480 x 240 x 400 48 87 83
S30 - Single Phase Input Swing ± 30%
SES-3L-S30-R 3 30 27 23 480 x 240 x 400 37 26 25
SES-5L-S30-R 5 50 45 39 480 x 240 x 400 40 43 41
SES-7.5L-S30-R 7.5 75 68 59 480 x 240 x 400 48 65 62
S35 - Single Phase Input Swing ± 35%
SES-3L-S35-R 3 30 27 23 480 x 240 x 400 41 26 25
SES-5L-S35-R 5 50 45 39 480 x 240 x 400 48 43 41
SES-7.5L-S30-R 7.5 75 68 59 480 x 240 x 400 50 65 62
L SERIES PRODUCT SELECTION TABLE
Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.
Technology: Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).
Input Voltage Swing:
Output Voltage: Presettable for any voltage between 100V, 110V, 115V or 120V, (Customer to specify), Single Phase, 2 Wire. 127V models available to special order.
The permissible input voltage swing is relative to the preset output voltage.
Output Voltage Accuracy: ± 1%, ± 3% or ± 5 % - auto selection based
on input voltage swing.
Frequency: 47 - 65Hz
Response Time: <1.5ms
Correction Time: A 10% supply variation will be corrected to
within 2.5% in 0.6 seconds.
Efficiency: 98%
Power Factor: Any lagging to 0.95 leading
Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.
Surge Ratings: 10 x max. current rating for 2 seconds 3 x max. current rating for 1 minute 2 x max. current rating for 2 minutes
Soft-Switch On: Ensures the output voltage is set at minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start up voltage surges.
Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.
Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.
Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)
EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.
CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).
Standard Warranty: Three Years / 36 Months from date of supply
Standard Features:
Input Circuit Breaker Input / Output Terminals Bypass Control Switch Output Voltmeter Over / Low Voltage Protection Volt Free Contacts - (Normally Open / Closed)
Optional Accessories: Lightning Surge Arrestor AquaStop Protective Coating - protection against damp and moisture ingress
SES L-S*-R SERIES - SINGLE PHASE - 3 to 10 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-L-S*-R - JANUARY 2013 www.AshleyEdison.com
Note: Special voltage configurations available to individual order.
Model / Accuracy
± 1% ± 3% ± 5%
S15 ± 15% -17% +18% -19% +21%
S20 ± 20% -22% +23% -24% +26%
S25 ± 25% -27% +28% -29% +31%
S30 ± 30% -32% +33% -34% +36%
S35 ± 35% -32% +33% -34% +36%
Single Phase, 2 Wire ( 1 Phase + Neutral + G/E).
Other swing options available to special quotation / order.
Rack Mount Enclosure
Height = 5.4U
100V - 110V - 115V - 120V - 127V - 50/60Hz
STEP–UP AC VOLTAGE STABILISERS
LH SERIES TECHNICAL SPECIFICATION
Model Rating
kVA
Max Rating (Amps) Dimensions (mm)
W x H x D
Weight
(Kg) @ 220V @ 230V @240V
S15 - Single Phase Input Swing ± 15%
SES-3LH-S15-R 3 13.6 13 12.5 480 x 240 x 400 46
SES-5LH-S15-R 5 23 22 21 480 x 240 x 400 56
S20 - Single Phase Input Swing ± 20%
SES-3LH-S20-R 3 13.6 13 12.5 480 x 240 x 400 48
SES-5LH-S20-R 5 23 22 21 480 x 240 x 400 62
S25 - Single Phase Input Swing ± 25%
SES-3LH-S25-R 3 13.6 13 12.5 480 x 240 x 400 52
SES-5LH-S25-R 5 23 22 21 480 x 240 x 400 62
HL SERIES PRODUCT SELECTION TABLE
Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.
Technology: Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).
Input Voltage: 100V, 110V, 115V & 120V (Customer to specify), Single Phase, 2 Wire ( 1 Phase + Neutral + G/E). 127V models available to special order.
Input Voltage Swing:
Output Voltage: Presettable for any voltage between 220V, 230V & 240V (Customer to specify), Single Phase, 2 Wire.
Output Voltage Accuracy: ± 1%, ± 3% or ± 5 % - auto selection based
on input voltage swing.
Frequency: 47 - 65Hz
Response Time: <1.5ms
Correction Time: A 10% supply variation will be corrected to
within 2.5% in 0.6 seconds.
Efficiency: 98%
Power Factor: Any lagging to 0.95 leading
Surge Ratings: 10 x max. current rating for 2 seconds 3 x max. current rating for 1 minute 2 x max. current rating for 2 minutes
Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.
Soft-Switch On: Ensures the output voltage is set at minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start up voltage surges.
Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.
Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.
Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)
EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.
CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).
Standard Warranty: Three Years / 36 Months from date of supply
Standard Features:
Input Circuit Breaker Input / Output Terminals Bypass Control Switch Output Voltmeter Over / Low Voltage Protection Volt Free Contacts - (Normally Open / Closed)
Optional Accessories: Lightning Surge Arrestor AquaStop Protective Coating - protection against damp and moisture ingress
SES LH-S*-R SERIES - SINGLE PHASE - 3 to 5 kVA
GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS
SES-LH-S*-R - JANUARY 2013 www.AshleyEdison.com
Note: Special voltage configurations available to individual order.
Model / Accuracy ± 1% ± 3% ± 5%
S15 ± 15% -17% +18% -19% +21%
S20 ± 20% -22% +23% -24% +26%
S25 ± 25% -27% +28% -29% +31%
Rack Mount Enclosure
Height = 5.4U
Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.
100V - 110V - 115V - 120V - 127V - 50/60Hz
top related