rad hardening
Post on 31-Dec-2015
21 Views
Preview:
DESCRIPTION
TRANSCRIPT
RAD hardening
Half of dual HV supply or quarter of quad HV supply w
breakout
Output connector
Input connector
Ion Pump: RAD area
Standard cable
RAD-hard cable
Ion Pump: non-RAD area
Notes
The Standard cable is the long cable from the rack-mounted HV supply to the area near the ion pump; it is plenum rated.
Where RAD-hard is not a requirement, the short segment is not used; alternatively, a full length RAD-hard cable can be used.
Break-out
Half of dual HV supply or quarter
of quad HV supply w breakout
Ion Pump
Standard HV cable
Direct-to-pump using controller-provided break-out
Break-out
Half of dual HV supply or quarter
of quad HV supply w/o breakout
Ion Pump
Standard HV cable
Standard HV cable
1:2 Breakout
Box
Indirect-to-pump using inline break-out box
top related