RAD hardening

Half of dual HV supply or quarter of quad HV supply w

breakout

Output connector

Input connector

Ion Pump: RAD area

Standard cable

RAD-hard cable

Ion Pump: non-RAD area

Notes

The Standard cable is the long cable from the rack-mounted HV supply to the area near the ion pump; it is plenum rated.

Where RAD-hard is not a requirement, the short segment is not used; alternatively, a full length RAD-hard cable can be used.

Break-out

Half of dual HV supply or quarter

of quad HV supply w breakout

Ion Pump

Standard HV cable

Direct-to-pump using controller-provided break-out

Break-out

Half of dual HV supply or quarter

of quad HV supply w/o breakout

Ion Pump

Standard HV cable

Standard HV cable

1:2 Breakout

Box

Indirect-to-pump using inline break-out box