september’s 2010 - 50 backlink packet september... · september’s 2010 - 50 backlink packet...
Post on 11-Jun-2020
4 Views
Preview:
TRANSCRIPT
September’s 2010 - 50 Backlink Packet
First I would like to thank you for subscribing to Paul’s Quality Backlinks; I assure you that you will really enjoy this
service and the quality of the backlinks I provide. Also, before you start link building, there’s some important
information you should know regarding backlinks.
You may have heard from people that do not have complete knowledge about Search Engine algorithms, say that
leaving your link on an “inner page” that has a low or 0 Page Rank inside of a high Page Rank domain will do your
link no good. This is completely false.
I have several websites ranking very high on the first page of Google (five of which, are number one) out of
hundreds of thousands of competing sites. The demo site (http://howtomakeadiapercakehq.com) that I use for
these links, is sitting on the first page of Google, on the 1st
spot out of over 338,000 sites for the keyword “how to
make a diaper cake”, this site also carries a Page Rank of 4. I have done all this by using this same method of linking
in inner pages of high PR authority sites. These links are simply amazing, and they will do wonders for your
keywords & sites. Imagine if you only have to complete with 250,000 or less competing sites, you will be able to
dominate your competition!
Matt Cutts, the head of Google’s webspam team was asked about above statement, but he couldn’t give a straight
answer due to the question being too close to Google’s algorithm. You will find part of the interview below.
“Stephan Spencer: OK. So, I guess, a follow on to that would be: a .edu and .gov link, and so forth, has, typically,
a more pristine link neighborhood, so it is not just about the PageRank, right? The link neighborhood comes into
play.
Matt Cutts: That is a little bit of a "secret sauce" question, so I am not going to go into how much we do trust
that sort of stuff.
Stephan Spencer: OK. I am going to slap my wrist now. Ouch, ouch!
Matt Cutts: [laughing]”
For the entire interview: http://www.stephanspencer.com/search-engines/matt-cutts-interview
Note: If you’re not already subscribed to Angela V. Edwards monthly backlink packets, I highly urge you to do so
now. Angela is a long time member of the Warrior Forum, and she has a program that provides you with 30 new
High Page Rank (PR.4 – PR. 9) backlinks at the cost of only $5 per month, with your first packet being free. We are
not in any way competing with each other, but rather working as a team to provide you with the largest amount of
the highest quality backlinks you can obtain every month. With both of our programs combined, you will get the
maximum search engine results that you can get without spending hundreds or even thousands of dollars a month.
Click here for Angela’s program: http://www.easybacklinkbuilder.com/
http://www.swellinfo.com/ - Page Rank 5
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “User CP” link
Next, click on “Edit Your Details” link
Then put your Website URL on the “Homepage URL” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://alachuaconservationtrust.org – Page Rank 4
First you will want to register
Registration Link: http://alachuaconservationtrust.org/index.php?/member/register
After you have registered, you will need to go to
http://alachuaconservationtrust.org/index.php?/member/login
Next, go to http://alachuaconservationtrust.org.lhost7.atlantic.net/index.php?/member/profile/ and
click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.fpcgermantown.org - Page Rank 4
First you will want to register
Registration Link: http://www.fpcgermantown.org/index.php/member/register
After you have registered, you will need to go to
http://www.fpcgermantown.org/index.php/member/login
Next, go to http://www.fpcgermantown.org/index.php/member/profile/ and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.thewaterisopen.com/ - Page Rank 5
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “Your Control Panel”
Now, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Your Public Profile” link
Here’s the public view of your anchor text links
http://www.bahamasissues.com/ - Page Rank 5
First you will want to register
Registration Link: http://www.bahamasissues.com/register.php
Once you have registered, click on “Settings” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.spiritatwork.org - Page Rank 5
First you will want to register
Registration Link: http://www.spiritatwork.org/index.php/forums/member/register
After you have registered, you will need to go to
http://www.spiritatwork.org/index.php/forums/member/login
Next, click on “Your Control Panel” link
Then click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links. (Note: You need to logoff first to see your public links)
http://www.docusign.com/ - Page Rank 5
First you will need to click on the tab that says “DocuSign Forum”
Now, you will need to register a new account
Next, click on “User CP” link
Then click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.sprintusers.com/ - Page Rank 5
First you will need to click on the tab that says “SU Forum”
Now, you will need to register a new account
Once you have registered, click on “User CP” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on “Your Profile” link
Here’s the public view of your anchor text links
http://www.fnhc.ca/ - Page Rank 5
First you will want to register
Registration Link: http://www.fnhc.ca/index.php/member/register
After you have registered, you will need to go to http://www.fnhc.ca/index.php/member/login
Next, go to http://www.fnhc.ca/index.php/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://dern.org.au/ - Page Rank 5
First you will want to register
Registration Link: http://dern.org.au/member/register/
After you have registered, you will need to click on “My Profile”
Next, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.boonex.us/ - Page Rank 4
First you will want to join
Registration Link: http://www.boonex.us/join.php
After you have joined, you will need to click “Edit profile info” link
You are given a WYSIWYG editor to create your anchor text links in the “Description” section
To see the public view of your anchor text, click on your profile icon
Here’s the public view of your anchor text links
http://www.golden-gate-park.com/ - Page Rank 5
First you will want to register
Registration Link: http://www.golden-gate-park.com/index.php/forums/member/register
After you have registered, you will need to go to http://www.golden-gate-
park.com/index.php/forums/member/login/
Next, click on “Your Control Panel” link
Now, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://webringworld.org/ - Page Rank 5
First you will want to create an account
Registration Link: http://webringworld.org/user.php
After you have created an account, click on “Change your info” link
To create your anchor text, use your HTML code in the “Signature” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, go to “Members Area” and click on “Members List”
Now, click on your username
Here’s the public view of your anchor text links
http://www.fiveoclockdallas.com – Page Rank 4
First you will want to create a new account
Registration Link: http://www.fiveoclockdallas.com/user/register
After you have registered, click on “Edit” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section
To see the public view of your anchor text, click on “View”
Here’s the public view of your anchor text links
http://mytidewatermoms.com/ - Page Rank 6
First you will want to create an account
Registration Link: http://mytidewatermoms.com/user/register
After you have registered, click on “Edit” link
Next, c lick on “Personal Information”
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “View”
Here’s the public view of your anchor text links
http://www.allprodad.com/videos/ - Page Rank 5
First you will want to sign up
Registration Link: http://www.allprodad.com/videos/signup.php
After you have registered, click on “My Profile” link
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Community”
Then search on your username
Here’s the public view of your anchor text links
http://assault.cubers.net/ - Page Rank 5
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “User CP”
Next, c lick on “Change Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on “Member List”
Then search for your username
Next, click on your username
Here’s the public view of your anchor text links
http://edgepointchurch.com/ - Page Rank 4
First you will want to register
Registration Link: http://edgepointchurch.com/member/register
After you have registered, you will need to go to http://edgepointchurch.com/member/login
Next, go to http://edgepointchurch.com/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://vasculardiseasemanagement.com/ - Page Rank 5
First you will want to register
Registration Link: http://vasculardiseasemanagement.com/user/register
After you have registered, click on “My Account” link
Next, click on “Edit” tab
Now, click on “My Information” link
To create your anchor text, use your HTML code in the “My Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://ican-online.org/ - Page Rank 5
First you will want to register
Registration Link: http://ican-online.org/user/register
After you have registered, click on “My account” link
Next, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://scadarmenia.org/ - Page Rank 5
First you will want to register
Registration Link: http://scadarmenia.org/member/register
After you have registered, you will need to go to http://scadarmenia.org/member/login
Next, go to http://scadarmenia.org/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://moviepals.org/ -Page Rank 4
First you will want to create a new account
Registration Link: http://moviepals.org/user/register
After you have registered, click on “My Account” tab
Now, click on “Edit” link
Next, click on “Profile” link
You are given a WYSIWYG editor to create your anchor text links in the “What is your
background and experience” section
To see the public view of your anchor text, put your mouse over “My Account” tab, you will see a drop
down menu, click on “My Profile” link
Here’s the public view of your anchor text links
http://isp-control.net/ - Page Rank 6
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
After you have registered, click on “User CP” link
Then click on “Change Signature”
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on “Member List”
Then search for your username
Now, click on your username
Here’s the public view of your anchor text links
http://www.thomasbrewton.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.thomasbrewton.com/index.php/member/register/
Once you have registered, click on “Your Account” link
Next, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.pollenblog.com.au/ - Page Rank 5
First you will need to click on the link that says “Comments”
Now, you will need to register a new account
After you have registered, click on your username
Then click on “Your Control Panel” link
Now, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.edmontonreptiles.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.edmontonreptiles.com/forum/register.php
Once you have registered, click on “Profile”
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.citizensky.org/ - Page Rank 6
First you will want to register
Registration Link: http://www.citizensky.org/user/register
Once you have registered, click on “Edit” tab
Then click on “Optional Personal Information” link
You are given a WYSIWYG editor to create your anchor text links in the “Background/Interesting Fact”
section
To see the public view of your anchor text, click on “View”
Here’s the public view of your anchor text links
http://opensource.com/ - Page Rank 6
First you will want to Sign up
Sign up Link: http://opensource.com/user/register
Once you have registered, click on “Edit” link
Next, click on “Personal Information” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “View”
Here’s the public view of your anchor text links
http://www.bmxplusmag.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.bmxplusmag.com/index.php/member/register
After you have registered, you will need to go to
http://www.bmxplusmag.com/index.php/member/login
Next, go to http://www.bmxplusmag.com/index.php/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.connect2mason.com – Page Rank 5
First, click any story that interests you
Then click on “Add new comment”
Now, you will have to “register” for an account
Next, click on your username
Then click on “Edit” link
Click on the link that says “Blog”
You are given a WYSIWYG editor to create your anchor text links in the “About the user” section of your
page.
To see the public view of your anchor text, click on “View” link
Here’s the public view of your anchor text links
http://www.poopreport.com – Page Rank 5
First you will want to register
Registration Link: http://www.poopreport.com/?q=user/register
After you have registered, you will need to click on “edit” tab
Next, click on “Personal Information” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.ergpa.com.au/ - Page Rank 4
First you will want to register
Registration Link: http://www.ergpa.com.au/member/register
After you have registered, you will need to go to http://www.ergpa.com.au/member/login
Next, go to http://www.ergpa.com.au/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://lessonopoly.org/svef/ - Page Rank 5
First you will want to create a new account
Registration Link: http://lessonopoly.org/svef/?q=register
Once you have registered, click on “My Blog” link
Next, click on “New Blog” link
You are given a WYSIWYG editor to create your anchor text links in the “Body” section of the blog
To see the public view of your anchor text, click on the title of the blog you just created
Here’s the public view of your anchor text links
http://www.milkandcookies.com/ - Page Rank 5
First you will want to create an account
Registration Link: http://www.milkandcookies.com/user/create/
Once you have created an account, click on “Edit Profile” link
To create your anchor text, put your URL in the section that says “Homepage URL” and place your
keyword in the “Homepage title” box. Your title will become your anchor text keyword
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.planewalker.com/ - Page Rank 4
First you will want to register
Registration Link:
http://www.planewalker.com/user/register?destination=comment%2Freply%2F10420%23comment-
form
Once you have registered, click on “Edit” link
Next, click on “Contact” link
Now, put your Website URL on the “Website” section
To see the public view of your anchor text, click on “View”
Here’s the public view of your anchor text links
http://www.e164.org/ - Page Rank 5
First you will need to click on the tab that says “Support Forum”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also put your URL in
the section that says “Website URL” and place your keyword in the “Website title” box. Your title will
become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.skotos.net/ - Page Rank 5
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.fandy.com/ - Page Rank 5
First you will want to create an account
Registration link: http://www.fandy.com/user/register
Once you have registered, click on “Edit” link
Next, click on “My Bio” link
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “View” tab
Here’s the public view of your anchor text links
http://www.funkyvenues.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.funkyvenues.com/member/register
After you have registered, you will need to go to http://www.funkyvenues.com/member/login
Next, go to http://www.funkyvenues.com/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.rige.net/ - Page Rank 4
First you will want to register
Registration Link: http://id.rige.net/newaccount.php
Once you have registered, click on “Profile” link
Next, click on “Edit Signature”
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on the links that says “Quick Links” you will see a drop
down menu, click on “My Profile”
Here’s the public view of your anchor text links
http://jci.livemap.de/ - Page Rank 5
First you will want to join
Join us Link: http://jci.livemap.de/index.php?option=com_comprofiler&task=registers
Once you have joined, click on “Edit your profile” link
Next, click on “Biography” tab
You are given a WYSIWYG editor to create your anchor text links in the “Biography” section
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.femaleforum.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.femaleforum.com/forums/member/register/
Once you have registered, click on “My Account” link
Then click on “Edit Profile” link
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text links, click on “Forums”
Now, click on your username
Here’s the public view of your anchor text links
http://www.visualarts.net.au/ - - Page Rank 6
First you will want to create a new account
Registration Link: http://www.visualarts.net.au/user/register
After you have registered, click on “Edit My Profile” link
Next, click on “Artist Gallery” link
You are given a mini WYSIWYG editor to create your anchor text links in the “Artist Statement” section
To see the public view of your anchor text links, click on “Artist Gallery” tab
Here’s the public view of your anchor text links
http://www.forestforum.co.uk/ - Page Rank 4
First you will want to register
Registration Link: http://www.forestforum.co.uk/register.php
Once you have registered, click on “Profile” link
Next, click on “Edit Signature”
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on the “My Profile” link
Here’s the public view of your anchor text links
http://www.marksdailyapple.com/ - Page Rank 6
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on the “My Profile” link
Here’s the public view of your anchor text links
http://www.mountaingirl.com/ - Page Rank 4
First you will want to register
Registration Link: http://www.mountaingirl.com/index.php/member/register
After you have registered, you will need to go to
http://www.mountaingirl.com/index.php/member/login
Next, go to http://www.mountaingirl.com/index.php/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.dance.com/ - Page Rank 5
First you will need to click on the tab that says “Blog”
Now, you will need to sign up a new account
Next, click on “My Profile” link
Then click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Return to My Profile Page”
Here’s the public view of your anchor text links
http://en.eyeka.asia/ - Page Rank 5
First you will want to create an account
Registration Link: http://en.eyeka.asia/signup?a=1
Once you have registered, click on the link that says “Edit”
To create your anchor text, use your HTML code in the “About the author” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://girlsaloud.forums.umusic.co.uk/ - Page Rank 4
First you will want to join
Join Link: http://girlsaloud.forums.umusic.co.uk/user/CreateUser.aspx?ReturnUrl=
Once you have joined, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “view public profile”
Here’s the public view of your anchor text links
http://www.andpva.com – Page Rank 5
First you will want to create an account
Registration Link: http://www.andpva.com/user/register
Once you have created an account, click on “Edit Profile” link
You are given a WYSIWYG editor to create your anchor text links in the “Bio” section
Once you saved your changes, you will be taken to the public view of your anchor text links
---------- BONUS SITE ----------
As a bonus, I included an affiliate web site that is an alternative to clickbank. High Profit offers high
payout amounts on its products and has an amazing conversion rate.
http://www.highprofits.com/
First you will need to click on the tab that says “Forum”
Now you will need to register a new account
Once you have registered, click on the “Profile” link
Next, you will need to click on the “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
top related